[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w20 started "build _service:gbs:perl-Crypt-SSLeay.spec" at Fri Jul 18 06:19:08 UTC 2014. [ 0s] [ 0s] Building perl-Crypt-SSLeay for project 'Tizen:3.0.M14.2:IVI' repository 'arm' arch 'armv7l' srcmd5 'a0011bbcdab7725167bb45049c374a55' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:perl-Crypt-SSLeay.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:perl-Crypt-SSLeay.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:perl-Crypt-SSLeay.spec build rpmlint-Factory ... [ 0s] cycle: bash -> libgcc_s1 [ 0s] breaking dependency libgcc_s1 -> bash [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc_s1... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling tar... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-armv7l-cross-arm... [ 4s] [26/40] preinstalling qemu-linux-user-cross-arm... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling nss... [ 5s] [35/40] preinstalling libmount... [ 5s] [36/40] preinstalling coreutils... [ 5s] [37/40] preinstalling libsoftokn3... [ 5s] [38/40] preinstalling rpm... [ 5s] [39/40] preinstalling util-linux... [ 5s] [40/40] preinstalling rpm-security-plugin... [ 5s] [ 5s] [1/8] preinstalling libext2fs... [ 5s] [2/8] preinstalling libpcre... [ 5s] [3/8] preinstalling libuuid... [ 5s] [4/8] preinstalling perl... [ 6s] [5/8] preinstalling grep... [ 6s] [6/8] preinstalling libblkid... [ 6s] [7/8] preinstalling libmount... [ 6s] [8/8] preinstalling util-linux... [ 6s] copying packages... [ 7s] reordering...cycle: bash -> libgcc_s1 [ 7s] breaking dependency libgcc_s1 -> bash [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] cycle: coreutils -> pam [ 7s] breaking dependency coreutils -> pam [ 7s] done [ 7s] booting kvm ... [ 7s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 10s] doing fast boot [ 12s] Creating device nodes with udev [ 13s] Waiting for device /dev/vda to appear: ok [ 13s] fsck from util-linux 2.21.2 [ 13s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 13s] /dev/vda: clean, 5936/2392064 files, 240003/9568256 blocks [ 13s] fsck succeeded. Mounting root device read-write. [ 13s] Mounting root /dev/vda [ 13s] mount -o rw -t ext4 /dev/vda /root [ 13s] replacing /etc/mtab with symlink to /proc/self/mounts [ 13s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 13s] 2nd stage started in virtual machine [ 13s] machine type: armv7l [ 13s] swapon /dev/vdb [ 13s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 13s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 14s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 14s] mount: none is already mounted or /proc busy [ 14s] mount: none is already mounted or /dev/pts busy [ 14s] logging output to //.build.log... [ 14s] processing specfile /.build-srcdir/_service:gbs:perl-Crypt-SSLeay.spec ... [ 14s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:perl-Crypt-SSLeay.spec build rpmlint-Factory ... [ 14s] running qemu-accel-armv7l-cross-arm postinstall script [ 14s] ++ uname -m [ 14s] + '[' armv7l = armv7l ']' [ 14s] + builtin echo armv7l arch [ 14s] armv7l arch [ 14s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 14s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 14s] + did_mount_it= [ 14s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 14s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 14s] + builtin echo Registering accelerated handler [ 14s] Registering accelerated handler [ 14s] + builtin echo -1 [ 14s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 14s] + '[' ']' [ 14s] + builtin echo All done [ 14s] All done [ 14s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 14s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 14s] + builtin echo 0 [ 14s] running setup postinstall script [ 14s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 14s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 14s] initializing rpm db... [ 15s] [1/100] installing libmagic-data-5.11-1.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [2/100] installing setup-0.9-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [3/100] installing terminfo-base-5.9-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [4/100] installing filesystem-3.1-1.1 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [5/100] installing glibc-2.18-1.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 18s] [6/100] installing libgcc_s1-4.8.2-1.2 [ 18s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [7/100] installing bash-4.2-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [8/100] installing cpio-2.11-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [9/100] installing diffutils-3.3-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [10/100] installing findutils-4.5.10-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [11/100] installing gawk-4.0.1-4.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [12/100] installing hostname-3.12-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [13/100] installing libattr-2.4.46-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [14/100] installing libbz2-1.0.6-1.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [15/100] installing libcap-2.24-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [16/100] installing libelf-0.155-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [17/100] installing libext2fs-1.42.6-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [18/100] installing libfreebl3-3.15.4-1.6 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [19/100] installing libgdbm-1.10-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [20/100] installing libgmp-5.1.3-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [21/100] installing libltdl-2.4.2-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [22/100] installing liblua-5.1.4-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [23/100] installing liblzma-5.0.3-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [24/100] installing libpcre-8.31-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [25/100] installing libpopt-1.16-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [26/100] installing libsmack-1.0.3.1-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [27/100] installing libsqlite-3.7.14-1.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [28/100] installing libuuid-2.24-4.5 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [29/100] installing m4-1.4.16-1.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [30/100] installing net-tools-2.0_20121208git-1.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [31/100] installing nspr-4.10.2-1.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [32/100] installing patch-2.7-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [33/100] installing pkg-config-0.28-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [34/100] installing sed-4.2.1-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [35/100] installing tar-1.27-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [36/100] installing update-alternatives-1.16.3-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [37/100] installing which-2.20-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [38/100] installing zlib-1.2.7-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [39/100] installing libncurses-5.9-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [40/100] installing build-compare-2012.01.26-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [41/100] installing qemu-accel-armv7l-cross-arm-0.4-2.10 [ 40s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 40s] ++ uname -m [ 40s] + '[' armv7l = armv7l ']' [ 40s] + builtin echo armv7l arch [ 40s] armv7l arch [ 40s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 40s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 40s] + did_mount_it= [ 40s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 40s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 40s] + builtin echo Registering accelerated handler [ 40s] Registering accelerated handler [ 40s] + builtin echo -1 [ 40s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 40s] + '[' ']' [ 40s] + builtin echo All done [ 40s] All done [ 40s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 40s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 40s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 40s] + builtin echo 0 [ 41s] [42/100] installing qemu-linux-user-cross-arm-1.6.0-5.10 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [43/100] installing grep-2.16-1.1 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [44/100] installing less-458-1.1 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [45/100] installing libacl-2.2.51-1.1 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [46/100] installing libasm-0.155-1.2 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [47/100] installing libatomic-4.8.2-1.2 [ 42s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [48/100] installing libblkid-2.24-4.5 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [49/100] installing libgomp-4.8.2-1.2 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [50/100] installing libitm-4.8.2-1.2 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 43s] [51/100] installing libmpfr-3.1.1-1.1 [ 43s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [52/100] installing libopenssl-1.0.1h-1.2 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [53/100] installing libreadline-5.2-1.1 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [54/100] installing libstdc++-4.8.2-1.2 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 44s] [55/100] installing make-3.82-1.1 [ 44s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [56/100] installing nss-certs-3.15.4-1.6 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [57/100] installing smack-1.0.3.1-1.1 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [58/100] installing bzip2-1.0.6-1.3 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [59/100] installing libmagic-5.11-1.2 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [60/100] installing libxml2-2.8.0-1.1 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [61/100] installing xz-5.0.3-1.1 [ 45s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 45s] [62/100] installing binutils-2.23.1-1.1 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 46s] [63/100] installing libdw-0.155-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [64/100] installing db4-4.8.30.NC-1.1 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [65/100] installing file-5.11-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [66/100] installing openssl-1.0.1h-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [67/100] installing libasan-4.8.2-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [68/100] installing libmount-2.24-4.5 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [69/100] installing libmpc-1.0-1.1 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [70/100] installing elfutils-0.155-1.2 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [71/100] installing nss-3.15.4-1.6 [ 46s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 46s] [72/100] installing coreutils-8.21-5.2 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [73/100] installing linux-glibc-devel-3.10-1.1 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [74/100] installing glibc-locale-2.18-1.2 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [75/100] installing gzip-1.6-1.1 [ 47s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 47s] [76/100] installing pam-1.1.6-1.2 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [77/100] installing cpp48-4.8.2-1.2 [ 48s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 48s] [78/100] installing tzdata-2012e-1.1 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [79/100] installing libsoftokn3-3.15.4-1.6 [ 49s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 49s] [80/100] installing perl-5.16.3-1.2 [ 50s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 50s] [81/100] installing rpm-4.11.0.1-1.1 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [82/100] installing build-mkbaselibs-20120927-1.2 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [83/100] installing cpp-4.8-1.1 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [84/100] installing glibc-devel-2.18-1.2 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [85/100] installing autoconf-2.69-1.1 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [86/100] installing util-linux-2.24-4.5 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [87/100] installing rpmlint-mini-1.4-3.9 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [88/100] installing rpm-security-plugin-4.11.0.1-1.1 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [89/100] installing rpmlint-tizen-1.0-1.1 [ 51s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 51s] [90/100] installing libstdc++48-devel-4.8.2-1.2 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [91/100] installing zlib-devel-1.2.7-1.2 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [92/100] installing automake-1.12.1-1.1 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [93/100] installing build-20120927-1.2 [ 52s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 52s] [94/100] installing gcc48-4.8.2-1.2 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [95/100] installing gcc-4.8-1.1 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [96/100] installing libopenssl-devel-1.0.1h-1.2 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [97/100] installing libtool-2.4.2-1.1 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [98/100] installing gcc48-c++-4.8.2-1.2 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [99/100] installing gcc-c++-4.8-1.1 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] [100/100] installing rpm-build-4.11.0.1-1.1 [ 53s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 53s] removing nis flags from //etc/nsswitch.conf... [ 53s] now finalizing build dir... [ 54s] qemu: Unsupported syscall: 311 [ 59s] build target is armv7l-tizen-linux [ 59s] ----------------------------------------------------------------- [ 59s] I have the following modifications for perl-Crypt-SSLeay.spec: [ 59s] 26c26 [ 59s] < Release: 0 [ 59s] --- [ 59s] > Release: 1.1 [ 59s] ----------------------------------------------------------------- [ 59s] ----- building perl-Crypt-SSLeay.spec (user abuild) [ 59s] ----------------------------------------------------------------- [ 59s] ----------------------------------------------------------------- [ 59s] qemu: Unsupported syscall: 311 [ 59s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/arm/a0011bbcdab7725167bb45049c374a55-perl-Crypt-SSLeay' /home/abuild/rpmbuild/SOURCES/perl-Crypt-SSLeay.spec [ 61s] Building target platforms: armv7l-tizen-linux [ 61s] Building for target armv7l-tizen-linux [ 61s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.18YTKA [ 61s] + umask 022 [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + cd /home/abuild/rpmbuild/BUILD [ 61s] + rm -rf Crypt-SSLeay-0.64 [ 61s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Crypt-SSLeay-0.64.tar.gz [ 61s] + /bin/tar -xf - [ 61s] + STATUS=0 [ 61s] + '[' 0 -ne 0 ']' [ 61s] + cd Crypt-SSLeay-0.64 [ 61s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 61s] + echo 'Patch #0 (0001-Remove-trailing-slash-in-proxy.patch):' [ 61s] Patch #0 (0001-Remove-trailing-slash-in-proxy.patch): [ 61s] + /bin/patch -p1 --fuzz=2 [ 61s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Remove-trailing-slash-in-proxy.patch [ 61s] patching file lib/Net/SSL.pm [ 61s] + cp /home/abuild/rpmbuild/SOURCES/perl-Crypt-SSLeay.manifest . [ 62s] + /bin/perl -pi -e 's|\r\n|\n|' README [ 62s] Can't open README: No such file or directory. [ 62s] + exit 0 [ 62s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.P9wuDT [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd Crypt-SSLeay-0.64 [ 62s] + LANG=C [ 62s] + export LANG [ 62s] + unset DISPLAY [ 62s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 62s] + export CFLAGS [ 62s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 62s] + export CXXFLAGS [ 62s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -I%_fmoddir' [ 62s] + export FFLAGS [ 62s] + LD_AS_NEEDED=1 [ 62s] + export LD_AS_NEEDED [ 62s] + export CRYPT_SSLEAY_DEFAULT=/usr [ 62s] + CRYPT_SSLEAY_DEFAULT=/usr [ 62s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 63s] The test suite can attempt to connect to public servers to ensure that the [ 63s] code is working properly. If you are behind a strict firewall or have no [ 63s] network connectivity, these tests may fail (through no fault of the code). [ 63s] Do you want to run the live tests (y/N)? [N] N [ 63s] Warning: prerequisite LWP::Protocol::https 6.02 not found. [ 63s] Warning: prerequisite Try::Tiny 0.09 not found. [ 63s] Checking if your kit is complete... [ 63s] Looks good [ 63s] Note (probably harmless): No library found for -lssl32 [ 63s] Note (probably harmless): No library found for -lssleay32 [ 63s] Note (probably harmless): No library found for -leay32 [ 63s] Writing Makefile for Crypt::SSLeay [ 63s] Writing MYMETA.yml and MYMETA.json [ 63s] + /bin/make -j4 [ 64s] /usr/bin/perl /usr/lib/perl5/5.16.3/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.16.3/ExtUtils/typemap -typemap typemap SSLeay.xs > SSLeay.xsc && mv SSLeay.xsc SSLeay.c [ 64s] Running Mkbootstrap for Crypt::SSLeay () [ 64s] chmod 644 SSLeay.bs [ 64s] cp SSLeay.bs blib/arch/auto/Crypt/SSLeay/SSLeay.bs [ 64s] chmod 644 blib/arch/auto/Crypt/SSLeay/SSLeay.bs [ 64s] cp lib/Crypt/SSLeay/X509.pm blib/lib/Crypt/SSLeay/X509.pm [ 64s] cp lib/Net/SSL.pm blib/lib/Net/SSL.pm [ 64s] cp SSLeay.pm blib/lib/Crypt/SSLeay.pm [ 64s] cp lib/Crypt/SSLeay/MainContext.pm blib/lib/Crypt/SSLeay/MainContext.pm [ 64s] cp lib/Crypt/SSLeay/Conn.pm blib/lib/Crypt/SSLeay/Conn.pm [ 64s] cp lib/Crypt/SSLeay/CTX.pm blib/lib/Crypt/SSLeay/CTX.pm [ 64s] cp lib/Crypt/SSLeay/Err.pm blib/lib/Crypt/SSLeay/Err.pm [ 65s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -DVERSION=\"0.64\" -DXS_VERSION=\"0.64\" -fPIC "-I/usr/lib/perl5/5.16.3/armv7l-linux-thread-multi/CORE" SSLeay.c [ 65s] SSLeay.c: In function 'XS_Crypt__SSLeay__CTX_new': [ 65s] SSLeay.c:272:6: warning: unused variable 'packname' [-Wunused-variable] [ 65s] SV* packname = ST(0) [ 65s] ^ [ 65s] SSLeay.c: In function 'XS_Crypt__SSLeay__Conn_new': [ 65s] SSLeay.c:570:6: warning: unused variable 'packname' [-Wunused-variable] [ 65s] SV* packname = ST(0) [ 65s] ^ [ 66s] In file included from /usr/lib/perl5/5.16.3/armv7l-linux-thread-multi/CORE/perl.h:5071:0, [ 66s] from SSLeay.xs:13: [ 66s] SSLeay.c: In function 'XS_Crypt__SSLeay__CTX_use_pkcs12_file': [ 66s] /usr/lib/perl5/5.16.3/armv7l-linux-thread-multi/CORE/embed.h:609:37: warning: 'RETVAL' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 66s] #define sv_setiv(a,b) Perl_sv_setiv(aTHX_ a,b) [ 66s] ^ [ 66s] SSLeay.c:459:6: note: 'RETVAL' was declared here [ 66s] int RETVAL; [ 66s] ^ [ 66s] rm -f blib/arch/auto/Crypt/SSLeay/SSLeay.so [ 66s] LD_RUN_PATH="/lib" cc -shared -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -Wall -pipe SSLeay.o -o blib/arch/auto/Crypt/SSLeay/SSLeay.so \ [ 66s] -lz -lssl -lcrypto \ [ 66s] [ 66s] chmod 755 blib/arch/auto/Crypt/SSLeay/SSLeay.so [ 67s] Manifying blib/man3/Net::SSL.3pm [ 67s] Manifying blib/man3/Crypt::SSLeay.3pm [ 67s] + exit 0 [ 67s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.hdkoDx [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd Crypt-SSLeay-0.64 [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm [ 67s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm install_vendor [ 68s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/Err.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/X509.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net/SSL.pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/share/man/man3/Net::SSL.3pm [ 69s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/share/man/man3/Crypt::SSLeay.3pm [ 69s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/5.16.3/armv7l-linux-thread-multi/perllocal.pod [ 69s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto [ 69s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 69s] + xargs -0 -r rm [ 69s] + '[' armv7l == noarch ']' [ 69s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/5.16.3/armv7l-linux-thread-multi/perllocal.pod [ 69s] + FILES=perl-Crypt-SSLeay.files [ 69s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3 -maxdepth 1 -type f [ 69s] + RES= [ 69s] + '[' -n '' ']' [ 69s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ [ 69s] ++ sort [ 69s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ -type d [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] + continue [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi/Crypt [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi/Crypt/SSLeay [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi/Net [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi/auto [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 69s] + el=armv7l-linux-thread-multi/auto/Crypt [ 69s] + all_dir=(${all_dir[@]} $el) [ 69s] + for dir in '`find ${base_dir} -type d | sort`' [ 69s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay = /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ ']' [ 69s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay [ 69s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/ '{print $2}' [ 70s] + el=armv7l-linux-thread-multi/auto/Crypt/SSLeay [ 70s] + all_dir=(${all_dir[@]} $el) [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi -maxdepth 1 -type f [ 70s] + RES= [ 70s] + '[' -n '' ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi [ 70s] + /bin/cat [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/Crypt = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt -maxdepth 1 -type f [ 70s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay.pm [ 70s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay.pm ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay.pm [ 70s] + /bin/cat [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/Crypt/SSLeay = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay -maxdepth 1 -type f [ 70s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Err.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/X509.pm' [ 70s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Err.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/X509.pm' ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/MainContext.pm [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Err.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/Err.pm [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/Conn.pm [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/CTX.pm [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Crypt/SSLeay/X509.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Crypt/SSLeay/X509.pm [ 70s] + /bin/cat [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/Net = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Net ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Net -maxdepth 1 -type f [ 70s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Net/SSL.pm [ 70s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Net/SSL.pm ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/Net/SSL.pm [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net/SSL.pm [ 70s] + /bin/cat [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + continue [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/auto/Crypt = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt -maxdepth 1 -type f [ 70s] + RES= [ 70s] + '[' -n '' ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt [ 70s] + /bin/cat [ 70s] + for i in '${all_dir[@]}' [ 70s] + '[' armv7l-linux-thread-multi/auto/Crypt/SSLeay = auto ']' [ 70s] + '[' /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay = /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay ']' [ 70s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay -maxdepth 1 -type f [ 70s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so' [ 70s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 70s] /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so' ']' [ 70s] + fgen_dir /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 70s] + /bin/cat [ 70s] + for file in '$RES' [ 70s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3//armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 70s] + fgen_file /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 70s] + /bin/cat [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/share/man ']' [ 70s] + fgen_file '/usr/share/man/man?/*' [ 70s] + /bin/cat [ 70s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/var/adm/perl-modules/perl-Crypt-SSLeay ']' [ 70s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/bin ']' [ 70s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/Crypt-SSLeay-0.64 [ 70s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm/usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.so [ 70s] cpio: glibc-2.18/csu: Cannot stat: No such file or directory [ 70s] cpio: glibc-2.18/ports/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 70s] cpio: glibc-2.18/ports/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 70s] 93 blocks [ 70s] + /usr/lib/rpm/brp-compress [ 70s] + /usr/lib/rpm/brp-tizen [ 71s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm [ 71s] Processing files: perl-Crypt-SSLeay-0.64-1.1.armv7l [ 71s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 71s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 71s] [ 71s] Provides: SSLeay.so perl(Crypt::SSLeay) = 0.64 perl(Crypt::SSLeay::CTX) perl(Crypt::SSLeay::Conn) perl(Crypt::SSLeay::Err) perl(Crypt::SSLeay::MainContext) perl(Crypt::SSLeay::X509) perl(DB) perl(Net::SSL) = 2.85 perl-Crypt-SSLeay = 0.64-1.1 perl-Crypt-SSLeay(armv7l-32) = 0.64-1.1 [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libcrypto.so.1.0.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libssl.so.1.0.0 [ 71s] Processing files: perl-Crypt-SSLeay-debugsource-0.64-1.1.armv7l [ 71s] Provides: perl-Crypt-SSLeay-debugsource = 0.64-1.1 perl-Crypt-SSLeay-debugsource(armv7l-32) = 0.64-1.1 [ 71s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 71s] Processing files: perl-Crypt-SSLeay-debuginfo-0.64-1.1.armv7l [ 71s] Provides: debuginfo(build-id) = c21a9e41702dd7cfded5dc764c98ea24b78d45bf [ 71s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 71s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm [ 71s] warning: Could not canonicalize hostname: w20 [ 71s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Crypt-SSLeay-0.64-1.1.src.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-0.64-1.1.armv7l.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-debugsource-0.64-1.1.armv7l.rpm [ 72s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-debuginfo-0.64-1.1.armv7l.rpm [ 72s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.rfT8R5 [ 72s] + umask 022 [ 72s] + cd /home/abuild/rpmbuild/BUILD [ 72s] + cd Crypt-SSLeay-0.64 [ 72s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Crypt-SSLeay-0.64-1.1.arm [ 72s] + exit 0 [ 72s] ... checking for files with abuild user/group [ 72s] [ 72s] RPMLINT report: [ 72s] =============== [ 72s] qemu: Unsupported syscall: 311 [ 81s] perl-Crypt-SSLeay.armv7l: W: zero-length /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/auto/Crypt/SSLeay/SSLeay.bs [ 81s] perl-Crypt-SSLeay.armv7l: W: script-without-shebang /usr/lib/perl5/vendor_perl/5.16.3/armv7l-linux-thread-multi/Net/SSL.pm [ 81s] This text file has executable bits set or is located in a path dedicated for [ 81s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 81s] meant to be an executable script, add the shebang, otherwise remove the [ 81s] executable bits or move the file elsewhere. [ 81s] [ 81s] perl-Crypt-SSLeay.armv7l: W: no-dependency-on perl-base 5.16.3 [ 81s] 2 packages and 0 specfiles checked; 0 errors, 3 warnings. [ 81s] [ 81s] ... creating baselibs [ 81s] qemu: Unsupported syscall: 311 [ 82s] ... saving built statistics [ 82s] ... saving built packages [ 82s] /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-0.64-1.1.armv7l.rpm [ 82s] /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-debuginfo-0.64-1.1.armv7l.rpm [ 82s] /home/abuild/rpmbuild/RPMS/armv7l/perl-Crypt-SSLeay-debugsource-0.64-1.1.armv7l.rpm [ 82s] /home/abuild/rpmbuild/SRPMS/perl-Crypt-SSLeay-0.64-1.1.src.rpm [ 82s] /home/abuild/rpmbuild/OTHER/_statistics [ 82s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 82s] [ 82s] w20 finished "build perl-Crypt-SSLeay.spec" at Fri Jul 18 06:20:29 UTC 2014. [ 82s] [ 85s] [ 75.708557] SysRq : Power Off [ 85s] [ 75.816449] Power down. [ 85s] build: extracting built packages... [ 85s] perl-Crypt-SSLeay-0.64-1.1.armv7l.rpm [ 85s] perl-Crypt-SSLeay-debuginfo-0.64-1.1.armv7l.rpm [ 85s] perl-Crypt-SSLeay-debugsource-0.64-1.1.armv7l.rpm [ 85s] perl-Crypt-SSLeay-0.64-1.1.src.rpm [ 85s] _statistics [ 85s] rpmlint.log