[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w21 started "build _service:gbs:swup.spec" at Thu Jul 17 15:45:58 UTC 2014. [ 0s] [ 0s] Building swup for project 'Tizen:3.0.M14.2:IVI' repository 'atom' arch 'i586' srcmd5 '2b77f708bf0b0e44d792f7fb25677c1a' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:swup.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:swup.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:swup.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 1s] [17/35] preinstalling libsmack... [ 1s] [18/35] preinstalling libsqlite... [ 1s] [19/35] preinstalling nspr... [ 1s] [20/35] preinstalling sed... [ 1s] [21/35] preinstalling tar... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling libacl... [ 1s] [24/35] preinstalling libgcc_s1... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling util-linux... [ 1s] [31/35] preinstalling coreutils... [ 1s] [32/35] preinstalling nss... [ 2s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 2s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] done [ 5s] booting kvm ... [ 5s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 16s] Waiting for device /dev/vda to appear: ok [ 16s] fsck from util-linux 2.21.2 [ 16s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 16s] /dev/vda: clean, 5052/2392064 files, 186284/9568256 blocks [ 16s] fsck succeeded. Mounting root device read-write. [ 16s] Mounting root /dev/vda [ 16s] mount -o rw -t ext4 /dev/vda /root [ 16s] replacing /etc/mtab with symlink to /proc/self/mounts [ 16s] 2nd stage started in virtual machine [ 16s] machine type: x86_64 [ 16s] switching personality to 8... [ 17s] 2nd stage started in virtual machine [ 17s] machine type: i686 [ 17s] swapon /dev/vdb [ 17s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 17s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 17s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 17s] mount: none is already mounted or /proc busy [ 17s] mount: none is already mounted or /dev/pts busy [ 17s] logging output to //.build.log... [ 17s] processing specfile /.build-srcdir/_service:gbs:swup.spec ... [ 17s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:swup.spec build rpmlint-Factory ... [ 17s] running setup postinstall script [ 17s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 17s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 17s] initializing rpm db... [ 17s] [1/104] installing hwdata-0.260-1.1 [ 17s] [2/104] installing libmagic-data-5.11-1.2 [ 17s] [3/104] installing setup-0.9-3.7 [ 17s] [4/104] installing terminfo-base-5.9-1.1 [ 17s] [5/104] installing filesystem-3.1-1.1 [ 17s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 17s] [6/104] installing glibc-2.18-1.3 [ 18s] [7/104] installing bash-4.2-1.1 [ 18s] [8/104] installing cpio-2.11-1.1 [ 18s] [9/104] installing diffutils-3.3-1.1 [ 18s] [10/104] installing findutils-4.5.10-1.1 [ 18s] [11/104] installing gawk-4.0.1-1.1 [ 18s] [12/104] installing hostname-3.12-1.1 [ 18s] [13/104] installing libattr-2.4.46-1.1 [ 18s] [14/104] installing libbz2-1.0.6-1.4 [ 18s] [15/104] installing libcap-2.24-1.1 [ 18s] [16/104] installing libdbus-1.6.12-1.1 [ 18s] [17/104] installing libelf-0.155-1.3 [ 18s] [18/104] installing libexpat-2.1.0-1.1 [ 18s] [19/104] installing libext2fs-1.42.6-1.1 [ 18s] [20/104] installing libfreebl3-3.15.4-1.8 [ 18s] [21/104] installing libgdbm-1.10-1.1 [ 18s] [22/104] installing libgmp-5.1.3-1.1 [ 18s] [23/104] installing libgpg-error-1.10-1.1 [ 18s] [24/104] installing libltdl-2.4.2-1.1 [ 18s] [25/104] installing liblua-5.1.4-1.1 [ 18s] [26/104] installing liblzma-5.0.3-1.2 [ 19s] [27/104] installing libpcre-8.31-3.1 [ 19s] [28/104] installing libpopt-1.16-1.1 [ 19s] [29/104] installing libsmack-1.0.3.1-1.1 [ 19s] [30/104] installing libsqlite-3.7.14-1.1 [ 19s] [31/104] installing libuuid-2.24-1.1 [ 19s] [32/104] installing m4-1.4.16-3.1 [ 19s] [33/104] installing net-tools-2.0_20121208git-1.1 [ 19s] [34/104] installing nspr-4.10.2-1.1 [ 19s] [35/104] installing patch-2.7-1.1 [ 19s] [36/104] installing pkg-config-0.28-1.1 [ 19s] [37/104] installing sed-4.2.1-3.1 [ 19s] [38/104] installing tar-1.27-1.1 [ 19s] [39/104] installing update-alternatives-1.16.3-3.1 [ 19s] [40/104] installing which-2.20-1.1 [ 19s] [41/104] installing zlib-1.2.7-1.1 [ 19s] [42/104] installing libncurses-5.9-1.1 [ 19s] [43/104] installing build-compare-2012.01.26-1.3 [ 19s] [44/104] installing grep-2.16-1.1 [ 19s] [45/104] installing less-458-1.1 [ 19s] [46/104] installing libacl-2.2.51-1.1 [ 19s] [47/104] installing libasm-0.155-1.3 [ 19s] [48/104] installing libatomic-4.8.2-1.10 [ 20s] [49/104] installing libblkid-2.24-1.1 [ 20s] [50/104] installing libgcc_s1-4.8.2-1.10 [ 20s] [51/104] installing libgcrypt-1.5.0-1.2 [ 20s] [52/104] installing libgomp-4.8.2-1.10 [ 20s] [53/104] installing libmpfr-3.1.1-1.1 [ 20s] [54/104] installing libreadline-5.2-1.1 [ 20s] [55/104] installing make-3.82-1.1 [ 20s] [56/104] installing nss-certs-3.15.4-1.8 [ 20s] [57/104] installing smack-1.0.3.1-1.1 [ 20s] [58/104] installing bzip2-1.0.6-1.4 [ 20s] [59/104] installing libkmod-15-1.1 [ 20s] [60/104] installing libmagic-5.11-1.2 [ 20s] [61/104] installing libxml2-2.8.0-1.1 [ 20s] [62/104] installing xz-5.0.3-1.2 [ 20s] [63/104] installing binutils-2.23.1-1.1 [ 22s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 22s] [64/104] installing libdw-0.155-1.3 [ 23s] [65/104] installing file-5.11-1.2 [ 23s] [66/104] installing libitm-4.8.2-1.10 [ 23s] [67/104] installing libmount-2.24-1.1 [ 23s] [68/104] installing libmpc-1.0-1.1 [ 23s] [69/104] installing libstdc++-4.8.2-1.10 [ 24s] [70/104] installing db4-4.8.30.NC-1.1 [ 24s] [71/104] installing libasan-4.8.2-1.10 [ 25s] [72/104] installing cpp48-4.8.2-1.10 [ 27s] [73/104] installing elfutils-0.155-1.3 [ 28s] [74/104] installing cpp-4.8-1.1 [ 28s] [75/104] installing perl-5.16.3-1.1 [ 54s] [76/104] installing build-mkbaselibs-20120927-1.2 [ 54s] [77/104] installing autoconf-2.69-1.1 [ 55s] [78/104] installing build-20120927-1.2 [ 55s] [79/104] installing pam-1.1.6-1.2 [ 55s] [80/104] installing nss-3.15.4-1.8 [ 55s] [81/104] installing pwdutils-3.2.19-1.1 [ 55s] [82/104] installing libsoftokn3-3.15.4-1.8 [ 55s] [83/104] installing libsystemd-208-1.1 [ 55s] [84/104] installing coreutils-8.21-1.1 [ 56s] [85/104] installing util-linux-2.24-1.1 [ 56s] [86/104] installing rpm-4.11.0.1-1.1 [ 56s] [87/104] installing linux-glibc-devel-3.10-1.1 [ 58s] [88/104] installing glibc-locale-2.18-1.3 [ 59s] [89/104] installing gzip-1.6-1.1 [ 59s] [90/104] installing automake-1.12.1-1.1 [ 59s] [91/104] installing tzdata-2012e-3.1 [ 60s] [92/104] installing dbus-1.6.12-1.1 [ 60s] [93/104] installing rpmlint-mini-1.4-3.9 [ 60s] [94/104] installing rpm-security-plugin-4.11.0.1-1.1 [ 60s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 60s] [95/104] installing rpmlint-tizen-1.0-3.1 [ 60s] [96/104] installing glibc-devel-2.18-1.3 [ 61s] [97/104] installing libtool-2.4.2-1.1 [ 62s] [98/104] installing systemd-208-1.1 [ 62s] [99/104] installing libstdc++48-devel-4.8.2-1.10 [ 65s] [100/104] installing gcc48-4.8.2-1.10 [ 66s] [101/104] installing gcc-4.8-1.1 [ 66s] [102/104] installing gcc48-c++-4.8.2-1.10 [ 66s] [103/104] installing gcc-c++-4.8-1.1 [ 66s] [104/104] installing rpm-build-4.11.0.1-1.1 [ 66s] removing nis flags from //etc/nsswitch.conf... [ 66s] now finalizing build dir... [ 67s] build target is i686-tizen-linux [ 67s] ----------------------------------------------------------------- [ 67s] I have the following modifications for swup.spec: [ 67s] 4c4 [ 67s] < Release: 0 [ 67s] --- [ 67s] > Release: 1.1 [ 67s] 47a48 [ 67s] > %changelog [ 67s] ----------------------------------------------------------------- [ 67s] ----- building swup.spec (user abuild) [ 67s] ----------------------------------------------------------------- [ 67s] ----------------------------------------------------------------- [ 67s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/atom/2b77f708bf0b0e44d792f7fb25677c1a-swup' /home/abuild/rpmbuild/SOURCES/swup.spec [ 67s] Building target platforms: i686-tizen-linux [ 67s] Building for target i686-tizen-linux [ 67s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.YdoNYo [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + rm -rf swup-0.2 [ 67s] + /bin/tar -xf - [ 67s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/swup-0.2.tar.bz2 [ 67s] + STATUS=0 [ 67s] + '[' 0 -ne 0 ']' [ 67s] + cd swup-0.2 [ 67s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 67s] + cp /home/abuild/rpmbuild/SOURCES/swup.manifest . [ 67s] + exit 0 [ 67s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Z9jmx8 [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd swup-0.2 [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 67s] + export CFLAGS [ 67s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 67s] + export CXXFLAGS [ 67s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 67s] + export FFLAGS [ 67s] + LD_AS_NEEDED=1 [ 67s] + export LD_AS_NEEDED [ 67s] + exit 0 [ 67s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.qQRx6R [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd swup-0.2 [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 [ 67s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 install [ 67s] install -D -m 755 swup.py /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/bin/swup [ 67s] install -D -m 755 system-update.sh /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/bin/system-update [ 67s] install -D -m 644 system-update@.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/lib/systemd/system/system-update@.service [ 67s] install -D -m 644 system-restore.target /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/lib/systemd/system/system-restore.target [ 67s] install -D -m 644 factory-reset.target /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/lib/systemd/system/factory-reset.target [ 67s] + rm -f /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386/usr/share/info/dir [ 67s] + find /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 -regex '.*\.la$' [ 67s] + xargs rm -f -- [ 67s] + xargs rm -f -- [ 67s] + find /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 -regex '.*\.a$' [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-update.target.wants [ 67s] + ln -s ../system-update@update.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-update.target.wants/system-update@update.service [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-restore.target.wants [ 67s] + ln -s ../system-update@system.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-restore.target.wants/system-update@system.service [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/factory-reset.target.wants [ 67s] + ln -s ../system-update@factory.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/factory-reset.target.wants/system-update@factory.service [ 67s] + ln -sf ../system-update@.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-update.target.wants/system-update@update.service [ 67s] + ln -sf ../system-update@.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/system-restore.target.wants/system-update@system.service [ 67s] + ln -sf ../system-update@.service /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386//usr/lib/systemd/system/factory-reset.target.wants/system-update@factory.service [ 67s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/swup-0.2 [ 67s] + /usr/lib/rpm/brp-compress [ 67s] + /usr/lib/rpm/brp-tizen [ 67s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 [ 67s] Processing files: swup-0.2-1.1.i686 [ 67s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 67s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 67s] [ 67s] Provides: swup = 0.2-1.1 swup(x86-32) = 0.2-1.1 [ 67s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 67s] Requires: /bin/bash /usr/bin/python [ 67s] Processing files: swup-debugsource-0.2-1.1.i686 [ 67s] Provides: swup-debugsource = 0.2-1.1 swup-debugsource(x86-32) = 0.2-1.1 [ 67s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 67s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 [ 67s] Wrote: /home/abuild/rpmbuild/SRPMS/swup-0.2-1.1.src.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/i686/swup-0.2-1.1.i686.rpm [ 67s] Wrote: /home/abuild/rpmbuild/RPMS/i686/swup-debugsource-0.2-1.1.i686.rpm [ 67s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.mMdLBP [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd swup-0.2 [ 67s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/swup-0.2-1.1.i386 [ 67s] + exit 0 [ 67s] ... checking for files with abuild user/group [ 67s] [ 67s] RPMLINT report: [ 67s] =============== [ 68s] swup.i686: W: no-binary [ 68s] The package should be of the noarch architecture because it doesn't contain [ 68s] any binaries. [ 68s] [ 68s] swup.i686: W: description-shorter-than-summary [ 68s] swup.src: W: description-shorter-than-summary [ 68s] The package description should be longer than the summary. be a bit more [ 68s] verbose, please. [ 68s] [ 68s] 2 packages and 0 specfiles checked; 0 errors, 3 warnings. [ 68s] [ 68s] ... creating baselibs [ 68s] ... saving built statistics [ 68s] ... saving built packages [ 68s] /home/abuild/rpmbuild/RPMS/i686/swup-0.2-1.1.i686.rpm [ 68s] /home/abuild/rpmbuild/RPMS/i686/swup-debugsource-0.2-1.1.i686.rpm [ 68s] /home/abuild/rpmbuild/SRPMS/swup-0.2-1.1.src.rpm [ 68s] /home/abuild/rpmbuild/OTHER/_statistics [ 68s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 68s] [ 68s] w21 finished "build swup.spec" at Thu Jul 17 15:47:06 UTC 2014. [ 68s] [ 69s] Powering off. [ 69s] [ 61.303366] Power down. [ 69s] build: extracting built packages... [ 69s] swup-0.2-1.1.i686.rpm [ 69s] swup-debugsource-0.2-1.1.i686.rpm [ 69s] swup-0.2-1.1.src.rpm [ 69s] _statistics [ 69s] rpmlint.log Retried build at Thu Jul 17 21:21:03 2014 returned same result, skipped