[ 0s] Using BUILD_ROOT=/srv/build/root_2/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_2/root [ 0s] [ 0s] [ 0s] w19 started "build _service:gbs:epson-inkjet-printer-escpr.spec" at Fri Jul 18 06:49:11 UTC 2014. [ 0s] [ 0s] Building epson-inkjet-printer-escpr for project 'Tizen:3.0.M14.2:IVI' repository 'arm' arch 'armv7l' srcmd5 '8203a1f46511ea0761ecf9579dfa14a2' [ 0s] [ 0s] processing specfile /srv/build/root_2/.build-srcdir/_service:gbs:epson-inkjet-printer-escpr.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_2/.build-srcdir/_service:gbs:epson-inkjet-printer-escpr.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/2/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_2/.build.rpmlist /srv/build/root_2/.build-srcdir/_service:gbs:epson-inkjet-printer-escpr.spec build rpmlint-Factory ... [ 0s] cycle: bash -> libgcc_s1 [ 0s] breaking dependency libgcc_s1 -> bash [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling libgcc_s1... [ 0s] [6/40] preinstalling bash... [ 0s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling tar... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-armv7l-cross-arm... [ 4s] [26/40] preinstalling qemu-linux-user-cross-arm... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling nss... [ 4s] [35/40] preinstalling libmount... [ 5s] [36/40] preinstalling coreutils... [ 5s] [37/40] preinstalling libsoftokn3... [ 5s] [38/40] preinstalling rpm... [ 5s] [39/40] preinstalling util-linux... [ 5s] [40/40] preinstalling rpm-security-plugin... [ 5s] [ 5s] [1/8] preinstalling libext2fs... [ 5s] [2/8] preinstalling libpcre... [ 5s] [3/8] preinstalling libuuid... [ 5s] [4/8] preinstalling perl... [ 6s] [5/8] preinstalling grep... [ 6s] [6/8] preinstalling libblkid... [ 6s] [7/8] preinstalling libmount... [ 6s] [8/8] preinstalling util-linux... [ 6s] copying packages... [ 7s] reordering...cycle: bash -> libgcc_s1 [ 7s] breaking dependency libgcc_s1 -> bash [ 7s] cycle: coreutils -> pam [ 7s] breaking dependency coreutils -> pam [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 8s] booting kvm ... [ 8s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8192 -drive file=/srv/build/root_2/root,if=virtio,cache=none -drive file=/srv/build/root_2/root,if=ide,index=0,cache=none -drive file=/srv/build/root_2/swap,if=virtio,cache=none -smp 4 [ 10s] doing fast boot [ 10s] Creating device nodes with udev [ 10s] Waiting for device /dev/vda to appear: ok [ 10s] fsck from util-linux 2.21.2 [ 10s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 10s] /dev/vda: clean, 5981/2392064 files, 241508/9568256 blocks [ 10s] fsck succeeded. Mounting root device read-write. [ 10s] Mounting root /dev/vda [ 10s] mount -o rw -t ext4 /dev/vda /root [ 10s] replacing /etc/mtab with symlink to /proc/self/mounts [ 10s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 11s] 2nd stage started in virtual machine [ 11s] machine type: armv7l [ 11s] swapon /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:epson-inkjet-printer-escpr.spec ... [ 11s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:epson-inkjet-printer-escpr.spec build rpmlint-Factory ... [ 11s] running qemu-accel-armv7l-cross-arm postinstall script [ 11s] ++ uname -m [ 11s] + '[' armv7l = armv7l ']' [ 11s] + builtin echo armv7l arch [ 11s] armv7l arch [ 11s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 11s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 11s] + did_mount_it= [ 11s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 11s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 11s] + builtin echo Registering accelerated handler [ 11s] Registering accelerated handler [ 11s] + builtin echo -1 [ 11s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 11s] + '[' ']' [ 11s] + builtin echo All done [ 11s] All done [ 11s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 11s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 12s] + builtin echo 0 [ 12s] running setup postinstall script [ 12s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 12s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 12s] initializing rpm db... [ 13s] [1/121] installing hwdata-0.260-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [2/121] installing libmagic-data-5.11-1.2 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [3/121] installing setup-0.9-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [4/121] installing terminfo-base-5.9-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [5/121] installing filesystem-3.1-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [6/121] installing glibc-2.18-1.2 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [7/121] installing libgcc_s1-4.8.2-1.2 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [8/121] installing bash-4.2-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [9/121] installing cpio-2.11-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [10/121] installing diffutils-3.3-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [11/121] installing findutils-4.5.10-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [12/121] installing gawk-4.0.1-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [13/121] installing hostname-3.12-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [14/121] installing libattr-2.4.46-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [15/121] installing libbz2-1.0.6-1.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [16/121] installing libcap-2.24-1.2 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [17/121] installing libdbus-1.6.12-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [18/121] installing libelf-0.155-1.3 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [19/121] installing libexpat-2.1.0-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [20/121] installing libext2fs-1.42.6-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [21/121] installing libfreebl3-3.15.4-1.6 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [22/121] installing libgdbm-1.10-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [23/121] installing libgmp-5.1.3-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [24/121] installing libgpg-error-1.10-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [25/121] installing libjpeg-8.0.2-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [26/121] installing libltdl-2.4.2-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [27/121] installing liblua-5.1.4-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [28/121] installing liblzma-5.0.3-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [29/121] installing libpcre-8.31-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [30/121] installing libpopt-1.16-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [31/121] installing libsmack-1.0.3.1-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [32/121] installing libsqlite-3.7.14-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [33/121] installing libuuid-2.24-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [34/121] installing m4-1.4.16-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [35/121] installing net-tools-2.0_20121208git-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [36/121] installing nspr-4.10.2-1.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [37/121] installing patch-2.7-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [38/121] installing pkg-config-0.28-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [39/121] installing sed-4.2.1-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [40/121] installing tar-1.27-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [41/121] installing update-alternatives-1.16.3-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [42/121] installing which-2.20-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [43/121] installing zlib-1.2.7-1.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [44/121] installing libncurses-5.9-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [45/121] installing build-compare-2012.01.26-1.2 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [46/121] installing libjpeg-devel-8.0.2-1.1 [ 16s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 16s] [47/121] installing qemu-accel-armv7l-cross-arm-0.4-2.10 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] ++ uname -m [ 19s] + '[' armv7l = armv7l ']' [ 19s] + builtin echo armv7l arch [ 19s] armv7l arch [ 19s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 19s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 19s] + did_mount_it= [ 19s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 19s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 19s] + builtin echo Registering accelerated handler [ 19s] Registering accelerated handler [ 19s] + builtin echo -1 [ 19s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 19s] + '[' ']' [ 19s] + builtin echo All done [ 19s] All done [ 19s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 19s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 19s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 19s] + builtin echo 0 [ 19s] [48/121] installing qemu-linux-user-cross-arm-1.6.0-5.10 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [49/121] installing grep-2.16-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [50/121] installing less-458-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [51/121] installing libacl-2.2.51-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [52/121] installing libasm-0.155-1.3 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [53/121] installing libatomic-4.8.2-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [54/121] installing libblkid-2.24-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [55/121] installing libgcrypt-1.5.0-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [56/121] installing libgomp-4.8.2-1.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [57/121] installing libitm-4.8.2-1.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [58/121] installing libmpfr-3.1.1-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [59/121] installing libopenssl-1.0.1h-1.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [60/121] installing libpng-1.2.50-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [61/121] installing libreadline-5.2-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [62/121] installing libstdc++-4.8.2-1.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [63/121] installing make-3.82-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [64/121] installing nss-certs-3.15.4-1.6 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [65/121] installing smack-1.0.3.1-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [66/121] installing bzip2-1.0.6-1.3 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [67/121] installing libkmod-15-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [68/121] installing libmagic-5.11-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [69/121] installing libxml2-2.8.0-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [70/121] installing xz-5.0.3-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [71/121] installing binutils-2.23.1-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 22s] [72/121] installing libdw-0.155-1.3 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [73/121] installing db4-4.8.30.NC-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [74/121] installing file-5.11-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [75/121] installing openssl-1.0.1h-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [76/121] installing libasan-4.8.2-1.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [77/121] installing libmount-2.24-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [78/121] installing libmpc-1.0-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [79/121] installing cups-libs-1.6.4-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [80/121] installing libtiff-4.0.2-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [81/121] installing elfutils-0.155-1.3 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [82/121] installing nss-3.15.4-1.6 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [83/121] installing coreutils-8.21-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [84/121] installing linux-glibc-devel-3.10-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [85/121] installing glibc-locale-2.18-1.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [86/121] installing gzip-1.6-1.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [87/121] installing pam-1.1.6-1.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [88/121] installing cpp48-4.8.2-1.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [89/121] installing tzdata-2012e-1.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [90/121] installing libsoftokn3-3.15.4-1.6 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [91/121] installing perl-5.16.3-1.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [92/121] installing rpm-4.11.0.1-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [93/121] installing build-mkbaselibs-20120927-1.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [94/121] installing cpp-4.8-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [95/121] installing glibc-devel-2.18-1.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [96/121] installing autoconf-2.69-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [97/121] installing pam-devel-1.1.6-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [98/121] installing pwdutils-3.2.19-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [99/121] installing libsystemd-208-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [100/121] installing util-linux-2.24-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [101/121] installing rpmlint-mini-1.4-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [102/121] installing rpm-security-plugin-4.11.0.1-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [103/121] installing rpmlint-tizen-1.0-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [104/121] installing libstdc++48-devel-4.8.2-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [105/121] installing zlib-devel-1.2.7-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [106/121] installing automake-1.12.1-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [107/121] installing build-20120927-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [108/121] installing dbus-1.6.12-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [109/121] installing gcc48-4.8.2-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [110/121] installing libstdc++-devel-4.8-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [111/121] installing gcc-4.8-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [112/121] installing libopenssl-devel-1.0.1h-1.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [113/121] installing libpng-devel-1.2.50-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [114/121] installing libtool-2.4.2-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [115/121] installing gcc48-c++-4.8.2-1.2 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [116/121] installing systemd-208-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [117/121] installing gcc-c++-4.8-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [118/121] installing systemd-devel-208-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [119/121] installing libtiff-devel-4.0.2-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [120/121] installing rpm-build-4.11.0.1-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] [121/121] installing cups-devel-1.6.4-1.1 [ 30s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 30s] removing nis flags from //etc/nsswitch.conf... [ 30s] now finalizing build dir... [ 31s] qemu: Unsupported syscall: 311 [ 36s] build target is armv7l-tizen-linux [ 36s] ----------------------------------------------------------------- [ 36s] I have the following modifications for epson-inkjet-printer-escpr.spec: [ 36s] 26c26 [ 36s] < Release: 3 [ 36s] --- [ 36s] > Release: 1.1 [ 36s] 94a95 [ 36s] > %changelog [ 36s] ----------------------------------------------------------------- [ 36s] ----- building epson-inkjet-printer-escpr.spec (user abuild) [ 36s] ----------------------------------------------------------------- [ 36s] ----------------------------------------------------------------- [ 36s] qemu: Unsupported syscall: 311 [ 36s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/arm/8203a1f46511ea0761ecf9579dfa14a2-epson-inkjet-printer-escpr' /home/abuild/rpmbuild/SOURCES/epson-inkjet-printer-escpr.spec [ 36s] Building target platforms: armv7l-tizen-linux [ 36s] Building for target armv7l-tizen-linux [ 36s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SKf4XW [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + rm -rf epson-inkjet-printer-escpr-1.2.2 [ 36s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/epson-inkjet-printer-escpr-1.2.2.tar.gz [ 36s] + /bin/tar -xf - [ 36s] + STATUS=0 [ 36s] + '[' 0 -ne 0 ']' [ 36s] + cd epson-inkjet-printer-escpr-1.2.2 [ 36s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 36s] + cp /home/abuild/rpmbuild/SOURCES/epson-inkjet-printer-escpr.manifest . [ 36s] + echo 'Patch #0 (tizen_bugfix.patch):' [ 36s] Patch #0 (tizen_bugfix.patch): [ 36s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_bugfix.patch [ 36s] + /bin/patch -p1 --fuzz=2 [ 36s] patching file src/filter.c [ 36s] patching file src/wrapper.c [ 36s] + echo 'Patch #1 (tizen_add_job_media_progress.patch):' [ 36s] Patch #1 (tizen_add_job_media_progress.patch): [ 36s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_add_job_media_progress.patch [ 36s] + /bin/patch -p1 --fuzz=2 [ 36s] patching file src/wrapper.c [ 36s] Hunk #1 succeeded at 235 with fuzz 2 (offset 4 lines). [ 36s] + echo 'Patch #2 (tizen_report_page_info.patch):' [ 36s] Patch #2 (tizen_report_page_info.patch): [ 36s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_report_page_info.patch [ 36s] + /bin/patch -p1 --fuzz=2 [ 36s] patching file src/wrapper.c [ 36s] + exit 0 [ 36s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NA77iE [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd epson-inkjet-printer-escpr-1.2.2 [ 36s] + LANG=C [ 36s] + export LANG [ 36s] + unset DISPLAY [ 36s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 36s] + export CFLAGS [ 36s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 36s] + export CXXFLAGS [ 36s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -I%_fmoddir' [ 36s] + export FFLAGS [ 36s] + LD_AS_NEEDED=1 [ 36s] + export LD_AS_NEEDED [ 36s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 36s] + export CFLAGS [ 36s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 36s] + export CXXFLAGS [ 36s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -I%_fmoddir' [ 36s] + export FFLAGS [ 36s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-cupsfilterdir=/usr/lib/cups/filter --with-cupsppddir=/opt/etc/cups/ppd/Epson --disable-static [ 37s] checking for a BSD-compatible install... /usr/bin/install -c [ 38s] checking whether build environment is sane... yes [ 38s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 38s] checking for gawk... gawk [ 38s] checking whether make sets $(MAKE)... yes [ 38s] checking for armv7l-tizen-linux-gnueabi-gcc... no [ 39s] checking for gcc... gcc [ 39s] checking whether the C compiler works... yes [ 39s] checking for C compiler default output file name... a.out [ 39s] checking for suffix of executables... [ 39s] checking whether we are cross compiling... no [ 39s] checking for suffix of object files... o [ 39s] checking whether we are using the GNU C compiler... yes [ 39s] checking whether gcc accepts -g... yes [ 39s] checking for gcc option to accept ISO C89... none needed [ 39s] checking for style of include used by make... GNU [ 39s] checking dependency style of gcc... gcc3 [ 39s] checking for an ANSI C-conforming const... yes [ 39s] checking how to run the C preprocessor... gcc -E [ 40s] checking whether ln -s works... yes [ 40s] checking build system type... armv7l-tizen-linux-gnueabi [ 40s] checking host system type... armv7l-tizen-linux-gnueabi [ 40s] checking for a sed that does not truncate output... /usr/bin/sed [ 40s] checking for grep that handles long lines and -e... /usr/bin/grep [ 40s] checking for egrep... /usr/bin/grep -E [ 40s] checking for fgrep... /usr/bin/grep -F [ 40s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 40s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 40s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 40s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 40s] checking the maximum length of command line arguments... 1572864 [ 40s] checking whether the shell understands some XSI constructs... yes [ 40s] checking whether the shell understands "+="... yes [ 40s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 40s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 40s] checking for objdump... objdump [ 40s] checking how to recognize dependent libraries... pass_all [ 40s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 40s] checking for ar... ar [ 40s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 40s] checking for strip... strip [ 40s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 40s] checking for ranlib... ranlib [ 41s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 41s] checking for ANSI C header files... yes [ 41s] checking for sys/types.h... yes [ 41s] checking for sys/stat.h... yes [ 41s] checking for stdlib.h... yes [ 41s] checking for string.h... yes [ 41s] checking for memory.h... yes [ 41s] checking for strings.h... yes [ 41s] checking for inttypes.h... yes [ 42s] checking for stdint.h... yes [ 42s] checking for unistd.h... yes [ 42s] checking for dlfcn.h... yes [ 42s] checking for objdir... .libs [ 42s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 42s] checking for gcc option to produce PIC... -fPIC -DPIC [ 42s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 42s] checking if gcc static flag -static works... no [ 42s] checking if gcc supports -c -o file.o... yes [ 42s] checking if gcc supports -c -o file.o... (cached) yes [ 42s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 42s] checking whether -lc should be explicitly linked in... no [ 43s] checking dynamic linker characteristics... GNU/Linux ld.so [ 43s] checking how to hardcode library paths into programs... immediate [ 43s] checking whether stripping libraries is possible... yes [ 43s] checking if libtool supports shared libraries... yes [ 43s] checking whether to build shared libraries... yes [ 43s] checking whether to build static libraries... no [ 43s] checking whether gcc and cc understand -c and -o together... yes [ 43s] checking for cups-config... yes [ 43s] checking for ANSI C header files... (cached) yes [ 43s] checking whether stat file-mode macros are broken... no [ 43s] checking whether time.h and sys/time.h may both be included... yes [ 43s] checking whether struct tm is in sys/time.h or time.h... time.h [ 43s] checking for pid_t... yes [ 43s] checking for size_t... yes [ 43s] checking cups/cups.h usability... yes [ 43s] checking cups/cups.h presence... yes [ 43s] checking for cups/cups.h... yes [ 44s] checking cups/ppd.h usability... yes [ 44s] checking cups/ppd.h presence... yes [ 44s] checking for cups/ppd.h... yes [ 44s] checking cups/raster.h usability... yes [ 44s] checking cups/raster.h presence... yes [ 44s] checking for cups/raster.h... yes [ 44s] checking ctype.h usability... yes [ 44s] checking ctype.h presence... yes [ 44s] checking for ctype.h... yes [ 44s] checking errno.h usability... yes [ 44s] checking errno.h presence... yes [ 44s] checking for errno.h... yes [ 44s] checking fcntl.h usability... yes [ 44s] checking fcntl.h presence... yes [ 44s] checking for fcntl.h... yes [ 44s] checking malloc.h usability... yes [ 44s] checking malloc.h presence... yes [ 44s] checking for malloc.h... yes [ 44s] checking signal.h usability... yes [ 44s] checking signal.h presence... yes [ 44s] checking for signal.h... yes [ 44s] checking stdarg.h usability... yes [ 44s] checking stdarg.h presence... yes [ 44s] checking for stdarg.h... yes [ 45s] checking stddef.h usability... yes [ 45s] checking stddef.h presence... yes [ 45s] checking for stddef.h... yes [ 45s] checking for stdlib.h... (cached) yes [ 45s] checking for string.h... (cached) yes [ 45s] checking for sys/stat.h... (cached) yes [ 45s] checking for sys/types.h... (cached) yes [ 45s] checking time.h usability... yes [ 45s] checking time.h presence... yes [ 45s] checking for time.h... yes [ 45s] checking for unistd.h... (cached) yes [ 45s] checking for ppdOpenFile in -lcups... yes [ 45s] checking for cupsRasterOpen in -lcupsimage... yes [ 45s] checking for stdlib.h... (cached) yes [ 45s] checking for GNU libc compatible malloc... yes [ 45s] checking for working memcmp... yes [ 45s] checking return type of signal handlers... void [ 45s] checking for memset... yes [ 46s] checking for strcspn... yes [ 46s] checking for strerror... yes [ 46s] checking for strrchr... yes [ 46s] configure: creating ./config.status [ 48s] config.status: creating Makefile [ 48s] config.status: creating epson-inkjet-printer-escpr.spec [ 49s] config.status: creating lsb/lsb-rpm.spec [ 49s] config.status: creating lib/Makefile [ 49s] config.status: creating ppd/Makefile [ 49s] config.status: creating src/Makefile [ 49s] config.status: creating config.h [ 49s] config.status: executing depfiles commands [ 50s] config.status: executing libtool commands [ 51s] + make [ 51s] make all-recursive [ 51s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 51s] Making all in lib [ 51s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 51s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-cbt.lo -MD -MP -MF .deps/libescpr_la-epson-cbt.Tpo -c -o libescpr_la-epson-cbt.lo `test -f 'epson-cbt.c' || echo './'`epson-cbt.c [ 51s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-cbt.lo -MD -MP -MF .deps/libescpr_la-epson-cbt.Tpo -c epson-cbt.c -fPIC -DPIC -o .libs/libescpr_la-epson-cbt.o [ 51s] epson-cbt.c: In function 'commClose': [ 51s] epson-cbt.c:654:15: warning: variable 'closePtlState' set but not used [-Wunused-but-set-variable] [ 51s] EPS_INT32 closePtlState = 0; [ 51s] ^ [ 51s] mv -f .deps/libescpr_la-epson-cbt.Tpo .deps/libescpr_la-epson-cbt.Plo [ 51s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage.lo -MD -MP -MF .deps/libescpr_la-epson-escpage.Tpo -c -o libescpr_la-epson-escpage.lo `test -f 'epson-escpage.c' || echo './'`epson-escpage.c [ 52s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage.lo -MD -MP -MF .deps/libescpr_la-epson-escpage.Tpo -c epson-escpage.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage.o [ 52s] mv -f .deps/libescpr_la-epson-escpage.Tpo .deps/libescpr_la-epson-escpage.Plo [ 52s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-color.Tpo -c -o libescpr_la-epson-escpage-color.lo `test -f 'epson-escpage-color.c' || echo './'`epson-escpage-color.c [ 52s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-color.Tpo -c epson-escpage-color.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-color.o [ 52s] mv -f .deps/libescpr_la-epson-escpage-color.Tpo .deps/libescpr_la-epson-escpage-color.Plo [ 52s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-comp.Tpo -c -o libescpr_la-epson-escpage-comp.lo `test -f 'epson-escpage-comp.c' || echo './'`epson-escpage-comp.c [ 53s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-comp.o [ 53s] epson-escpage-comp.c:95:6: warning: missing braces around initializer [-Wmissing-braces] [ 53s] = { 0x00, 2, 0x02, 2, 0x01, 2, 0x03, 4, 0x0b, 4, [ 53s] ^ [ 53s] epson-escpage-comp.c:95:6: warning: (near initialization for 'HufmanDefTable3[0]') [-Wmissing-braces] [ 53s] mv -f .deps/libescpr_la-epson-escpage-comp.Tpo .deps/libescpr_la-epson-escpage-comp.Plo [ 53s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-mono.Tpo -c -o libescpr_la-epson-escpage-mono.lo `test -f 'epson-escpage-mono.c' || echo './'`epson-escpage-mono.c [ 53s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpr_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpage-mono.o [ 53s] epson-escpage-mono.c: In function 'BandInit': [ 53s] epson-escpage-mono.c:888:25: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] [ 53s] memset(pBand, 0, sizeof(pBand)); [ 53s] ^ [ 54s] mv -f .deps/libescpr_la-epson-escpage-mono.Tpo .deps/libescpr_la-epson-escpage-mono.Plo [ 54s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-api.Tpo -c -o libescpr_la-epson-escpr-api.lo `test -f 'epson-escpr-api.c' || echo './'`epson-escpr-api.c [ 54s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-api.Tpo -c epson-escpr-api.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-api.o [ 54s] epson-escpr-api.c: In function 'SetupRGBAttrib': [ 54s] epson-escpr-api.c:3759:14: warning: unused variable 'lOffset' [-Wunused-variable] [ 54s] EPS_INT32 lOffset = printJob.attr.inputResolution/30; [ 54s] ^ [ 55s] mv -f .deps/libescpr_la-epson-escpr-api.Tpo .deps/libescpr_la-epson-escpr-api.Plo [ 55s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-dbg.Tpo -c -o libescpr_la-epson-escpr-dbg.lo `test -f 'epson-escpr-dbg.c' || echo './'`epson-escpr-dbg.c [ 55s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-dbg.o [ 55s] mv -f .deps/libescpr_la-epson-escpr-dbg.Tpo .deps/libescpr_la-epson-escpr-dbg.Plo [ 55s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-mem.Tpo -c -o libescpr_la-epson-escpr-mem.lo `test -f 'epson-escpr-mem.c' || echo './'`epson-escpr-mem.c [ 55s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-mem.o [ 55s] mv -f .deps/libescpr_la-epson-escpr-mem.Tpo .deps/libescpr_la-epson-escpr-mem.Plo [ 55s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-services.Tpo -c -o libescpr_la-epson-escpr-services.lo `test -f 'epson-escpr-services.c' || echo './'`epson-escpr-services.c [ 56s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpr_la-epson-escpr-services.Tpo -c epson-escpr-services.c -fPIC -DPIC -o .libs/libescpr_la-epson-escpr-services.o [ 56s] epson-escpr-services.c: In function 'serParseDeviceID': [ 56s] epson-escpr-services.c:341:10: warning: 'k' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 56s] if(k)*k = ','; [ 56s] ^ [ 56s] mv -f .deps/libescpr_la-epson-escpr-services.Tpo .deps/libescpr_la-epson-escpr-services.Plo [ 56s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-layout.lo -MD -MP -MF .deps/libescpr_la-epson-layout.Tpo -c -o libescpr_la-epson-layout.lo `test -f 'epson-layout.c' || echo './'`epson-layout.c [ 56s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-layout.lo -MD -MP -MF .deps/libescpr_la-epson-layout.Tpo -c epson-layout.c -fPIC -DPIC -o .libs/libescpr_la-epson-layout.o [ 57s] mv -f .deps/libescpr_la-epson-layout.Tpo .deps/libescpr_la-epson-layout.Plo [ 57s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpr_la-epson-net-lpr.Tpo -c -o libescpr_la-epson-net-lpr.lo `test -f 'epson-net-lpr.c' || echo './'`epson-net-lpr.c [ 57s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpr_la-epson-net-lpr.Tpo -c epson-net-lpr.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-lpr.o [ 57s] mv -f .deps/libescpr_la-epson-net-lpr.Tpo .deps/libescpr_la-epson-net-lpr.Plo [ 57s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-raw.lo -MD -MP -MF .deps/libescpr_la-epson-net-raw.Tpo -c -o libescpr_la-epson-net-raw.lo `test -f 'epson-net-raw.c' || echo './'`epson-net-raw.c [ 57s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-raw.lo -MD -MP -MF .deps/libescpr_la-epson-net-raw.Tpo -c epson-net-raw.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-raw.o [ 57s] mv -f .deps/libescpr_la-epson-net-raw.Tpo .deps/libescpr_la-epson-net-raw.Plo [ 57s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpr_la-epson-net-snmp.Tpo -c -o libescpr_la-epson-net-snmp.lo `test -f 'epson-net-snmp.c' || echo './'`epson-net-snmp.c [ 58s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpr_la-epson-net-snmp.Tpo -c epson-net-snmp.c -fPIC -DPIC -o .libs/libescpr_la-epson-net-snmp.o [ 58s] mv -f .deps/libescpr_la-epson-net-snmp.Tpo .deps/libescpr_la-epson-net-snmp.Plo [ 58s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-protocol.lo -MD -MP -MF .deps/libescpr_la-epson-protocol.Tpo -c -o libescpr_la-epson-protocol.lo `test -f 'epson-protocol.c' || echo './'`epson-protocol.c [ 59s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-protocol.lo -MD -MP -MF .deps/libescpr_la-epson-protocol.Tpo -c epson-protocol.c -fPIC -DPIC -o .libs/libescpr_la-epson-protocol.o [ 59s] mv -f .deps/libescpr_la-epson-protocol.Tpo .deps/libescpr_la-epson-protocol.Plo [ 59s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-usb.lo -MD -MP -MF .deps/libescpr_la-epson-usb.Tpo -c -o libescpr_la-epson-usb.lo `test -f 'epson-usb.c' || echo './'`epson-usb.c [ 59s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpr_la-epson-usb.lo -MD -MP -MF .deps/libescpr_la-epson-usb.Tpo -c epson-usb.c -fPIC -DPIC -o .libs/libescpr_la-epson-usb.o [ 59s] epson-usb.c: In function 'usbResetPrinter': [ 59s] epson-usb.c:670:21: warning: variable 'retBufSize' set but not used [-Wunused-but-set-variable] [ 59s] EPS_INT32 retBufSize; /* Size of buffer written */ [ 59s] ^ [ 59s] mv -f .deps/libescpr_la-epson-usb.Tpo .deps/libescpr_la-epson-usb.Plo [ 59s] /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -O2 -version-info 1:0:0 -o libescpr.la -rpath /usr/lib libescpr_la-epson-cbt.lo libescpr_la-epson-escpage.lo libescpr_la-epson-escpage-color.lo libescpr_la-epson-escpage-comp.lo libescpr_la-epson-escpage-mono.lo libescpr_la-epson-escpr-api.lo libescpr_la-epson-escpr-dbg.lo libescpr_la-epson-escpr-mem.lo libescpr_la-epson-escpr-services.lo libescpr_la-epson-layout.lo libescpr_la-epson-net-lpr.lo libescpr_la-epson-net-raw.lo libescpr_la-epson-net-snmp.lo libescpr_la-epson-protocol.lo libescpr_la-epson-usb.lo -lcupsimage -lcups [ 60s] libtool: link: gcc -shared .libs/libescpr_la-epson-cbt.o .libs/libescpr_la-epson-escpage.o .libs/libescpr_la-epson-escpage-color.o .libs/libescpr_la-epson-escpage-comp.o .libs/libescpr_la-epson-escpage-mono.o .libs/libescpr_la-epson-escpr-api.o .libs/libescpr_la-epson-escpr-dbg.o .libs/libescpr_la-epson-escpr-mem.o .libs/libescpr_la-epson-escpr-services.o .libs/libescpr_la-epson-layout.o .libs/libescpr_la-epson-net-lpr.o .libs/libescpr_la-epson-net-raw.o .libs/libescpr_la-epson-net-snmp.o .libs/libescpr_la-epson-protocol.o .libs/libescpr_la-epson-usb.o -lcupsimage -lcups -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wl,-soname -Wl,libescpr.so.1 -o .libs/libescpr.so.1.0.0 [ 60s] libtool: link: (cd ".libs" && rm -f "libescpr.so.1" && ln -s "libescpr.so.1.0.0" "libescpr.so.1") [ 60s] libtool: link: (cd ".libs" && rm -f "libescpr.so" && ln -s "libescpr.so.1.0.0" "libescpr.so") [ 61s] libtool: link: ( cd ".libs" && rm -f "libescpr.la" && ln -s "../libescpr.la" "libescpr.la" ) [ 61s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 61s] Making all in ppd [ 61s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 61s] make[2]: Nothing to be done for `all'. [ 61s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 61s] Making all in src [ 61s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-filter.o -MD -MP -MF .deps/epson_escpr-filter.Tpo -c -o epson_escpr-filter.o `test -f 'filter.c' || echo './'`filter.c [ 61s] filter.c: In function 'getMediaSizeID': [ 61s] filter.c:231:2: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 61s] debug_msg("media name = %s\n", media_name); [ 61s] ^ [ 61s] filter.c: In function 'main': [ 61s] filter.c:420:2: warning: implicit declaration of function 'SetupJobAttrib' [-Wimplicit-function-declaration] [ 61s] err = SetupJobAttrib(&jobAttr); [ 61s] ^ [ 61s] filter.c:431:2: warning: implicit declaration of function 'pageAllocBuffer' [-Wimplicit-function-declaration] [ 61s] err = pageAllocBuffer(); [ 61s] ^ [ 61s] filter.c:450:2: warning: implicit declaration of function 'SendStartJob' [-Wimplicit-function-declaration] [ 61s] err = SendStartJob(FALSE); [ 61s] ^ [ 61s] filter.c:677:5: warning: implicit declaration of function 'PrintBand' [-Wimplicit-function-declaration] [ 61s] PrintBand (rever_buf, bandBmp.WidthBytes, &printHeight); [ 61s] ^ [ 61s] filter.c:650:8: warning: unused variable 'revert_line' [-Wunused-variable] [ 61s] int revert_line; [ 61s] ^ [ 61s] filter.c:249:7: warning: unused variable 'libfile' [-Wunused-variable] [ 61s] char libfile[PATH_MAX + 1]; [ 61s] ^ [ 61s] filter.c: In function 'epsInitLib': [ 61s] filter.c:134:1: warning: control reaches end of non-void function [-Wreturn-type] [ 61s] } [ 61s] ^ [ 61s] mv -f .deps/epson_escpr-filter.Tpo .deps/epson_escpr-filter.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-debug.o -MD -MP -MF .deps/epson_escpr-debug.Tpo -c -o epson_escpr-debug.o `test -f 'debug.c' || echo './'`debug.c [ 61s] mv -f .deps/epson_escpr-debug.Tpo .deps/epson_escpr-debug.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-str.o -MD -MP -MF .deps/epson_escpr-str.Tpo -c -o epson_escpr-str.o `test -f 'str.c' || echo './'`str.c [ 61s] mv -f .deps/epson_escpr-str.Tpo .deps/epson_escpr-str.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-err.o -MD -MP -MF .deps/epson_escpr-err.Tpo -c -o epson_escpr-err.o `test -f 'err.c' || echo './'`err.c [ 61s] err.c:36:14: warning: 'debug_f' defined but not used [-Wunused-variable] [ 61s] static FILE *debug_f = NULL; [ 61s] ^ [ 61s] mv -f .deps/epson_escpr-err.Tpo .deps/epson_escpr-err.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-csv.o -MD -MP -MF .deps/epson_escpr-csv.Tpo -c -o epson_escpr-csv.o `test -f 'csv.c' || echo './'`csv.c [ 61s] mv -f .deps/epson_escpr-csv.Tpo .deps/epson_escpr-csv.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-mem.o -MD -MP -MF .deps/epson_escpr-mem.Tpo -c -o epson_escpr-mem.o `test -f 'mem.c' || echo './'`mem.c [ 61s] mv -f .deps/epson_escpr-mem.Tpo .deps/epson_escpr-mem.Po [ 61s] gcc -DHAVE_CONFIG_H -I. -I.. -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr-linux_cmn.o -MD -MP -MF .deps/epson_escpr-linux_cmn.Tpo -c -o epson_escpr-linux_cmn.o `test -f 'linux_cmn.c' || echo './'`linux_cmn.c [ 61s] linux_cmn.c: In function 'epsmpGetLocalTime': [ 61s] linux_cmn.c:176:13: warning: variable 't' set but not used [-Wunused-but-set-variable] [ 61s] struct tm *t; [ 61s] ^ [ 61s] mv -f .deps/epson_escpr-linux_cmn.Tpo .deps/epson_escpr-linux_cmn.Po [ 61s] /bin/sh ../libtool --tag=CC --mode=link gcc -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o epson-escpr epson_escpr-filter.o epson_escpr-debug.o epson_escpr-str.o epson_escpr-err.o epson_escpr-csv.o epson_escpr-mem.o epson_escpr-linux_cmn.o ../lib/libescpr.la -lcupsimage -lcups [ 62s] libtool: link: gcc -I../lib -DPAPER_PATH=\"/usr/share/epson-inkjet-printer-escpr/paper_list.csv\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o .libs/epson-escpr epson_escpr-filter.o epson_escpr-debug.o epson_escpr-str.o epson_escpr-err.o epson_escpr-csv.o epson_escpr-mem.o epson_escpr-linux_cmn.o ../lib/.libs/libescpr.so -lcupsimage -lcups [ 62s] gcc -DHAVE_CONFIG_H -I. -I.. -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpr_wrapper-wrapper.o -MD -MP -MF .deps/epson_escpr_wrapper-wrapper.Tpo -c -o epson_escpr_wrapper-wrapper.o `test -f 'wrapper.c' || echo './'`wrapper.c [ 62s] wrapper.c: In function 'main': [ 62s] wrapper.c:187:2: warning: 'cupsRasterReadHeader' is deprecated (declared at /usr/include/cups/raster.h:370) [-Wdeprecated-declarations] [ 62s] while (cupsRasterReadHeader (ras, &header) && !cancel_flg) [ 62s] ^ [ 63s] wrapper.c: At top level: [ 63s] wrapper.c:434:1: warning: 'sigterm_handler' defined but not used [-Wunused-function] [ 63s] sigterm_handler (int sig) [ 63s] ^ [ 63s] wrapper.c:67:14: warning: 'debug_f' defined but not used [-Wunused-variable] [ 63s] static FILE *debug_f = NULL; [ 63s] ^ [ 63s] mv -f .deps/epson_escpr_wrapper-wrapper.Tpo .deps/epson_escpr_wrapper-wrapper.Po [ 63s] /bin/sh ../libtool --tag=CC --mode=link gcc -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o epson-escpr-wrapper epson_escpr_wrapper-wrapper.o -lcupsimage -lcups [ 63s] libtool: link: gcc -DCUPS_FILTER_NAME=\"epson-escpr\" -DCUPS_FILTER_PATH=\"/usr/lib/cups/filter\" -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o epson-escpr-wrapper epson_escpr_wrapper-wrapper.o -lcupsimage -lcups [ 63s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 63s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 63s] rm -f debian/control debian/control.tmp; \ [ 63s] sed -e 's|[@]PACKAGE_BUGREPORT[@]|Seiko Epson Corporation |' \ [ 63s] -e 's|[@]PACKAGE_NAME[@]|Epson Inkjet Printer Driver (ESC/P-R) for Linux|' \ [ 63s] -e 's|[@]PACKAGE_TARNAME[@]|epson-inkjet-printer-escpr|' \ [ 63s] './debian/control.in' > debian/control.tmp; \ [ 63s] mv debian/control.tmp debian/control [ 63s] rm -f debian/rules debian/rules.tmp; \ [ 63s] sed -e 's|[@]CUPS_FILTER_DIR[@]|/usr/lib/cups/filter|' \ [ 63s] -e 's|[@]CUPS_PPD_DIR[@]|/opt/etc/cups/ppd/Epson|' \ [ 63s] -e 's|[@]PACKAGE_TARNAME[@]|epson-inkjet-printer-escpr|' \ [ 63s] './debian/rules.in' > debian/rules.tmp; \ [ 63s] mv debian/rules.tmp debian/rules; \ [ 63s] chmod +x debian/rules [ 64s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 64s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 64s] + exit 0 [ 64s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.clpyG1 [ 64s] + umask 022 [ 64s] + cd /home/abuild/rpmbuild/BUILD [ 64s] + cd epson-inkjet-printer-escpr-1.2.2 [ 64s] + LANG=C [ 64s] + export LANG [ 64s] + unset DISPLAY [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 64s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 64s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 64s] + make install-strip DESTDIR=/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 64s] make INSTALL_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s" \ [ 64s] install_sh_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ [ 64s] `test -z 'strip' || \ [ 64s] echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install [ 64s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 64s] Making install in lib [ 64s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 64s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 64s] test -z "/usr/lib" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib" [ 64s] /bin/sh ../libtool --mode=install /usr/bin/install -c -s libescpr.la '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib' [ 64s] libtool: install: /usr/bin/install -c .libs/libescpr.so.1.0.0 /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/libescpr.so.1.0.0 [ 64s] libtool: install: strip --strip-unneeded /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/libescpr.so.1.0.0 [ 64s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib && { ln -s -f libescpr.so.1.0.0 libescpr.so.1 || { rm -f libescpr.so.1 && ln -s libescpr.so.1.0.0 libescpr.so.1; }; }) [ 64s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib && { ln -s -f libescpr.so.1.0.0 libescpr.so || { rm -f libescpr.so && ln -s libescpr.so.1.0.0 libescpr.so; }; }) [ 64s] libtool: install: /usr/bin/install -c .libs/libescpr.lai /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/libescpr.la [ 64s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 64s] make[3]: Nothing to be done for `install-data-am'. [ 64s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 64s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 64s] Making install in ppd [ 64s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 64s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 64s] make[3]: Nothing to be done for `install-exec-am'. [ 64s] test -z "/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr" [ 64s] /usr/bin/install -c -m 644 Epson-Artisan_630-epson-escpr-en.ppd Epson-Artisan_700-epson-escpr-en.ppd Epson-Artisan_710-epson-escpr-en.ppd Epson-Artisan_720-epson-escpr-en.ppd Epson-Artisan_730-epson-escpr-en.ppd Epson-Artisan_800-epson-escpr-en.ppd Epson-Artisan_810-epson-escpr-en.ppd Epson-Artisan_830-epson-escpr-en.ppd Epson-Artisan_837-epson-escpr-en.ppd Epson-Artisan_1430-epson-escpr-en.ppd Epson-E-150-epson-escpr-en.ppd Epson-E-200-epson-escpr-en.ppd Epson-E-300-epson-escpr-en.ppd Epson-E-330-epson-escpr-en.ppd Epson-E-330S-epson-escpr-en.ppd Epson-E-340-epson-escpr-en.ppd Epson-E-350-epson-escpr-en.ppd Epson-E-360_Series-epson-escpr-en.ppd Epson-E-500-epson-escpr-en.ppd Epson-E-520-epson-escpr-en.ppd Epson-E-530-epson-escpr-en.ppd Epson-E-600-epson-escpr-en.ppd Epson-E-700-epson-escpr-en.ppd Epson-E-720-epson-escpr-en.ppd Epson-E-800-epson-escpr-en.ppd Epson-E-810-epson-escpr-en.ppd Epson-E-820-epson-escpr-en.ppd Epson-E-830_Series-epson-escpr-en.ppd Epson-EP-702A-epson-escpr-en.ppd Epson-EP-703A-epson-escpr-en.ppd Epson-EP-704A-epson-escpr-en.ppd Epson-EP-705A_Series-epson-escpr-en.ppd Epson-EP-774A-epson-escpr-en.ppd Epson-EP-775A_Series-epson-escpr-en.ppd Epson-EP-801A-epson-escpr-en.ppd Epson-EP-802A-epson-escpr-en.ppd Epson-EP-803A-epson-escpr-en.ppd Epson-EP-804A-epson-escpr-en.ppd Epson-EP-805A_Series-epson-escpr-en.ppd Epson-EP-901A-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 64s] /usr/bin/install -c -m 644 Epson-EP-901F-epson-escpr-en.ppd Epson-EP-902A-epson-escpr-en.ppd Epson-EP-903A-epson-escpr-en.ppd Epson-EP-903F-epson-escpr-en.ppd Epson-EP-904A-epson-escpr-en.ppd Epson-EP-904F-epson-escpr-en.ppd Epson-EP-905A_Series-epson-escpr-en.ppd Epson-EP-905F_Series-epson-escpr-en.ppd Epson-EP-4004-epson-escpr-en.ppd Epson-K200-epson-escpr-en.ppd Epson-K300-epson-escpr-en.ppd Epson-ME_200-epson-escpr-en.ppd Epson-ME-301_Series-epson-escpr-en.ppd Epson-ME-303_Series-epson-escpr-en.ppd Epson-ME-400_Series-epson-escpr-en.ppd Epson-ME_OFFICE_510-epson-escpr-en.ppd Epson-ME_OFFICE_520-epson-escpr-en.ppd Epson-ME_OFFICE_530-epson-escpr-en.ppd Epson-ME_OFFICE_560W-epson-escpr-en.ppd Epson-ME_OFFICE_570-epson-escpr-en.ppd Epson-ME_Office_600F-epson-escpr-en.ppd Epson-ME_OFFICE_620F-epson-escpr-en.ppd Epson-ME_OFFICE_650FN-epson-escpr-en.ppd Epson-ME_OFFICE_700FW-epson-escpr-en.ppd Epson-ME_OFFICE_900WD-epson-escpr-en.ppd Epson-ME_OFFICE_940FW-epson-escpr-en.ppd Epson-ME_OFFICE_960FWD-epson-escpr-en.ppd Epson-NX230_TX230-epson-escpr-en.ppd Epson-NX430_TX435-epson-escpr-en.ppd Epson-PictureMate_500-epson-escpr-en.ppd Epson-PictureMate_Deluxe-epson-escpr-en.ppd Epson-PictureMate_Express-epson-escpr-en.ppd Epson-PictureMate_PM_200-epson-escpr-en.ppd Epson-PictureMate_PM_210-epson-escpr-en.ppd Epson-PictureMate_PM_215-epson-escpr-en.ppd Epson-PictureMate_PM_225-epson-escpr-en.ppd Epson-PictureMate_PM_235-epson-escpr-en.ppd Epson-PictureMate_PM_240-epson-escpr-en.ppd Epson-PictureMate_PM_245-epson-escpr-en.ppd Epson-PictureMate_PM_250-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 64s] /usr/bin/install -c -m 644 Epson-PictureMate_PM_260-epson-escpr-en.ppd Epson-PictureMate_PM_270-epson-escpr-en.ppd Epson-PictureMate_PM_280-epson-escpr-en.ppd Epson-PictureMate_PM_290-epson-escpr-en.ppd Epson-PictureMate_PM_300-epson-escpr-en.ppd Epson-PictureMate_PM_310-epson-escpr-en.ppd Epson-PM-A750-epson-escpr-en.ppd Epson-PM-A820-epson-escpr-en.ppd Epson-PM-A840-epson-escpr-en.ppd Epson-PM-A840S-epson-escpr-en.ppd Epson-PM-A890-epson-escpr-en.ppd Epson-PM-A920-epson-escpr-en.ppd Epson-PM-A940-epson-escpr-en.ppd Epson-PM-A950-epson-escpr-en.ppd Epson-PM-A970-epson-escpr-en.ppd Epson-PM-D600-epson-escpr-en.ppd Epson-PM-D800-epson-escpr-en.ppd Epson-PM-D870-epson-escpr-en.ppd Epson-PM-G4500-epson-escpr-en.ppd Epson-PM-G850-epson-escpr-en.ppd Epson-PM-T960-epson-escpr-en.ppd Epson-PM-T990-epson-escpr-en.ppd Epson-PX-5V-epson-escpr-en.ppd Epson-PX-7V-epson-escpr-en.ppd Epson-PX-205_Series-epson-escpr-en.ppd Epson-PX-404A-epson-escpr-en.ppd Epson-PX-405A_Series-epson-escpr-en.ppd Epson-PX-434A-epson-escpr-en.ppd Epson-PX-435A_Series-epson-escpr-en.ppd Epson-PX-501A-epson-escpr-en.ppd Epson-PX-502A-epson-escpr-en.ppd Epson-PX-503A-epson-escpr-en.ppd Epson-PX-504A-epson-escpr-en.ppd Epson-PX-505F_Series-epson-escpr-en.ppd Epson-PX-535F_Series-epson-escpr-en.ppd Epson-PX-5600-epson-escpr-en.ppd Epson-PX-601F-epson-escpr-en.ppd Epson-PX-602F-epson-escpr-en.ppd Epson-PX-603F-epson-escpr-en.ppd Epson-PX-605F_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 64s] /usr/bin/install -c -m 644 Epson-PX-673F-epson-escpr-en.ppd Epson-PX-675F_Series-epson-escpr-en.ppd Epson-PX-A620-epson-escpr-en.ppd Epson-PX-A640-epson-escpr-en.ppd Epson-PX-A650-epson-escpr-en.ppd Epson-PX-A720-epson-escpr-en.ppd Epson-PX-A740-epson-escpr-en.ppd Epson-PX-B700-epson-escpr-en.ppd Epson-PX-B750F-epson-escpr-en.ppd Epson-PX-FA700-epson-escpr-en.ppd Epson-PX-G5300-epson-escpr-en.ppd Epson-PX-1600F-epson-escpr-en.ppd Epson-PX-1700F-epson-escpr-en.ppd Epson-Stylus_CX2800-epson-escpr-en.ppd Epson-Stylus_CX2900-epson-escpr-en.ppd Epson-Stylus_CX3700-epson-escpr-en.ppd Epson-Stylus_CX3800-epson-escpr-en.ppd Epson-Stylus_CX3900-epson-escpr-en.ppd Epson-Stylus_CX4200-epson-escpr-en.ppd Epson-Stylus_CX4800-epson-escpr-en.ppd Epson-Stylus_CX4900-epson-escpr-en.ppd Epson-Stylus_CX5000-epson-escpr-en.ppd Epson-Stylus_CX5900-epson-escpr-en.ppd Epson-Stylus_CX6000-epson-escpr-en.ppd Epson-Stylus_CX7300-epson-escpr-en.ppd Epson-Stylus_CX7400-epson-escpr-en.ppd Epson-Stylus_CX7700-epson-escpr-en.ppd Epson-Stylus_CX7800-epson-escpr-en.ppd Epson-Stylus_CX8300-epson-escpr-en.ppd Epson-Stylus_CX8400-epson-escpr-en.ppd Epson-Stylus_CX9300F-epson-escpr-en.ppd Epson-Stylus_CX9400Fax-epson-escpr-en.ppd Epson-Stylus_DX4000-epson-escpr-en.ppd Epson-Stylus_DX4200-epson-escpr-en.ppd Epson-Stylus_DX4800-epson-escpr-en.ppd Epson-Stylus_DX5000-epson-escpr-en.ppd Epson-Stylus_DX7400-epson-escpr-en.ppd Epson-Stylus_DX8400-epson-escpr-en.ppd Epson-Stylus_DX9400F-epson-escpr-en.ppd Epson-Stylus_NX200-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 64s] /usr/bin/install -c -m 644 Epson-Stylus_NX210-epson-escpr-en.ppd Epson-Stylus_NX300-epson-escpr-en.ppd Epson-Stylus_NX400-epson-escpr-en.ppd Epson-Stylus_NX410-epson-escpr-en.ppd Epson-Stylus_NX420-epson-escpr-en.ppd Epson-Stylus_NX510-epson-escpr-en.ppd Epson-Stylus_NX620-epson-escpr-en.ppd Epson-Stylus_Office_BX300F-epson-escpr-en.ppd Epson-Stylus_Office_BX305-epson-escpr-en.ppd Epson-Stylus_Office_BX310FN-epson-escpr-en.ppd Epson-Stylus_Office_BX320FW-epson-escpr-en.ppd Epson-Stylus_Office_BX525WD-epson-escpr-en.ppd Epson-Stylus_Office_BX600FW-epson-escpr-en.ppd Epson-Stylus_Office_BX610FW-epson-escpr-en.ppd Epson-Stylus_Office_BX620FWD-epson-escpr-en.ppd Epson-Stylus_Office_BX925-epson-escpr-en.ppd Epson-Stylus_Office_TX300F-epson-escpr-en.ppd Epson-Stylus_Office_TX320F-epson-escpr-en.ppd Epson-Stylus_Office_TX510FN-epson-escpr-en.ppd Epson-Stylus_Office_TX515FN-epson-escpr-en.ppd Epson-Stylus_Office_TX525FW-epson-escpr-en.ppd Epson-Stylus_Office_TX600FW-epson-escpr-en.ppd Epson-Stylus_Office_TX610FW-epson-escpr-en.ppd Epson-Stylus_Office_TX620FWD-epson-escpr-en.ppd Epson-Stylus_Photo_1400-epson-escpr-en.ppd Epson-Stylus_Photo_1410-epson-escpr-en.ppd Epson-Stylus_Photo_PX650-epson-escpr-en.ppd Epson-Stylus_Photo_PX660-epson-escpr-en.ppd Epson-Stylus_Photo_PX700W-epson-escpr-en.ppd Epson-Stylus_Photo_PX710W-epson-escpr-en.ppd Epson-Stylus_Photo_PX720WD-epson-escpr-en.ppd Epson-Stylus_Photo_PX800FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX810FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX820FWD-epson-escpr-en.ppd Epson-Stylus_Photo_R1900-epson-escpr-en.ppd Epson-Stylus_Photo_R240-epson-escpr-en.ppd Epson-Stylus_Photo_R250-epson-escpr-en.ppd Epson-Stylus_Photo_R260-epson-escpr-en.ppd Epson-Stylus_Photo_R265-epson-escpr-en.ppd Epson-Stylus_Photo_R270-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 65s] /usr/bin/install -c -m 644 Epson-Stylus_Photo_R2880-epson-escpr-en.ppd Epson-Stylus_Photo_R3000-epson-escpr-en.ppd Epson-Stylus_Photo_R340-epson-escpr-en.ppd Epson-Stylus_Photo_R350-epson-escpr-en.ppd Epson-Stylus_Photo_R360-epson-escpr-en.ppd Epson-Stylus_Photo_R380-epson-escpr-en.ppd Epson-Stylus_Photo_R390-epson-escpr-en.ppd Epson-Stylus_Photo_RX520-epson-escpr-en.ppd Epson-Stylus_Photo_RX530-epson-escpr-en.ppd Epson-Stylus_Photo_RX560-epson-escpr-en.ppd Epson-Stylus_Photo_RX580-epson-escpr-en.ppd Epson-Stylus_Photo_RX585-epson-escpr-en.ppd Epson-Stylus_Photo_RX590-epson-escpr-en.ppd Epson-Stylus_Photo_RX595-epson-escpr-en.ppd Epson-Stylus_Photo_RX610-epson-escpr-en.ppd Epson-Stylus_Photo_RX640-epson-escpr-en.ppd Epson-Stylus_Photo_RX650-epson-escpr-en.ppd Epson-Stylus_Photo_RX680-epson-escpr-en.ppd Epson-Stylus_Photo_RX685-epson-escpr-en.ppd Epson-Stylus_Photo_RX690-epson-escpr-en.ppd Epson-Stylus_Photo_TX650-epson-escpr-en.ppd Epson-Stylus_Photo_TX700W-epson-escpr-en.ppd Epson-Stylus_Photo_TX710W-epson-escpr-en.ppd Epson-Stylus_Photo_TX720WD-epson-escpr-en.ppd Epson-Stylus_Photo_TX730-epson-escpr-en.ppd Epson-Stylus_Photo_TX800FW-epson-escpr-en.ppd Epson-Stylus_Photo_TX810FW-epson-escpr-en.ppd Epson-Stylus_Photo_PX730-epson-escpr-en.ppd Epson-Stylus_Photo_PX830-epson-escpr-en.ppd Epson-Stylus_Photo_1430-epson-escpr-en.ppd Epson-Stylus_Photo_1500-epson-escpr-en.ppd Epson-Stylus_Photo_R2000-epson-escpr-en.ppd Epson-Stylus_SX200-epson-escpr-en.ppd Epson-Stylus_SX210-epson-escpr-en.ppd Epson-Stylus_SX218-epson-escpr-en.ppd Epson-Stylus_SX230-epson-escpr-en.ppd Epson-Stylus_SX235-epson-escpr-en.ppd Epson-Stylus_SX400-epson-escpr-en.ppd Epson-Stylus_SX410-epson-escpr-en.ppd Epson-Stylus_SX420W-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 65s] /usr/bin/install -c -m 644 Epson-Stylus_SX430-epson-escpr-en.ppd Epson-Stylus_SX440-epson-escpr-en.ppd Epson-Stylus_SX510W-epson-escpr-en.ppd Epson-Stylus_SX525WD-epson-escpr-en.ppd Epson-Stylus_SX535WD-epson-escpr-en.ppd Epson-Stylus_SX600FW-epson-escpr-en.ppd Epson-Stylus_SX610FW-epson-escpr-en.ppd Epson-Stylus_SX620FW-epson-escpr-en.ppd Epson-Stylus_TX200-epson-escpr-en.ppd Epson-Stylus_TX210-epson-escpr-en.ppd Epson-Stylus_TX220-epson-escpr-en.ppd Epson-Stylus_TX400-epson-escpr-en.ppd Epson-Stylus_TX410-epson-escpr-en.ppd Epson-Stylus_TX420W-epson-escpr-en.ppd Epson-Stylus_TX550W-epson-escpr-en.ppd Epson-Stylus_TX560WD-epson-escpr-en.ppd Epson-Stylus_NX230-epson-escpr-en.ppd Epson-Stylus_NX330-epson-escpr-en.ppd Epson-Stylus_NX430-epson-escpr-en.ppd Epson-Stylus_TX230-epson-escpr-en.ppd Epson-Stylus_TX235-epson-escpr-en.ppd Epson-Stylus_TX430-epson-escpr-en.ppd Epson-Stylus_NX530-epson-escpr-en.ppd Epson-Stylus_NX635-epson-escpr-en.ppd Epson-Stylus_Office_BX305_Plus-epson-escpr-en.ppd Epson-Stylus_Office_BX535WD-epson-escpr-en.ppd Epson-Stylus_Office_BX630FW-epson-escpr-en.ppd Epson-Stylus_Office_BX635FWD-epson-escpr-en.ppd Epson-Stylus_Office_BX935-epson-escpr-en.ppd Epson-TX220_NX220-epson-escpr-en.ppd Epson-TX320_WorkForce320-epson-escpr-en.ppd Epson-TX420_NX420-epson-escpr-en.ppd Epson-TX720_Artisan720-epson-escpr-en.ppd Epson-TX820_Artisan830-epson-escpr-en.ppd Epson-WorkForce_310-epson-escpr-en.ppd Epson-WorkForce_320-epson-escpr-en.ppd Epson-WorkForce_435-epson-escpr-en.ppd Epson-WorkForce_500-epson-escpr-en.ppd Epson-WorkForce_520-epson-escpr-en.ppd Epson-WorkForce_545-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 65s] /usr/bin/install -c -m 644 Epson-WorkForce_600-epson-escpr-en.ppd Epson-WorkForce_610-epson-escpr-en.ppd Epson-WorkForce_620-epson-escpr-en.ppd Epson-WorkForce_630-epson-escpr-en.ppd Epson-WorkForce_645-epson-escpr-en.ppd Epson-WorkForce_840-epson-escpr-en.ppd Epson-WorkForce_845-epson-escpr-en.ppd Epson-WF-2510_Series-epson-escpr-en.ppd Epson-WF-2520_Series-epson-escpr-en.ppd Epson-WF-2530_Series-epson-escpr-en.ppd Epson-WF-2540_Series-epson-escpr-en.ppd Epson-WF-3010_Series-epson-escpr-en.ppd Epson-WF-3520_Series-epson-escpr-en.ppd Epson-WF-3530_Series-epson-escpr-en.ppd Epson-WF-3540_Series-epson-escpr-en.ppd Epson-WP-4010_Series-epson-escpr-en.ppd Epson-WP-4011_Series-epson-escpr-en.ppd Epson-WP-4015_Series-epson-escpr-en.ppd Epson-WP-4020_Series-epson-escpr-en.ppd Epson-WP-4022_Series-epson-escpr-en.ppd Epson-WP-4023_Series-epson-escpr-en.ppd Epson-WP-4025_Series-epson-escpr-en.ppd Epson-WP-4090_Series-epson-escpr-en.ppd Epson-WP-4091_Series-epson-escpr-en.ppd Epson-WP-4092_Series-epson-escpr-en.ppd Epson-WP-4095_Series-epson-escpr-en.ppd Epson-WP-4511_Series-epson-escpr-en.ppd Epson-WP-4515_Series-epson-escpr-en.ppd Epson-WP-4520_Series-epson-escpr-en.ppd Epson-WP-4521_Series-epson-escpr-en.ppd Epson-WP-4525_Series-epson-escpr-en.ppd Epson-WP-4530_Series-epson-escpr-en.ppd Epson-WP-4531_Series-epson-escpr-en.ppd Epson-WP-4532_Series-epson-escpr-en.ppd Epson-WP-4533_Series-epson-escpr-en.ppd Epson-WP-4535_Series-epson-escpr-en.ppd Epson-WP-4540_Series-epson-escpr-en.ppd Epson-WP-4545_Series-epson-escpr-en.ppd Epson-WP-4590_Series-epson-escpr-en.ppd Epson-WP-4592_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 65s] /usr/bin/install -c -m 644 Epson-WP-4595_Series-epson-escpr-en.ppd Epson-WF-7510_Series-epson-escpr-en.ppd Epson-WF-7511_Series-epson-escpr-en.ppd Epson-WF-7515_Series-epson-escpr-en.ppd Epson-WF-7520_Series-epson-escpr-en.ppd Epson-WF-7521_Series-epson-escpr-en.ppd Epson-WF-7525_Series-epson-escpr-en.ppd Epson-XP-200_Series-epson-escpr-en.ppd Epson-XP-201_204_208_Series-epson-escpr-en.ppd Epson-XP-202_203_206_Series-epson-escpr-en.ppd Epson-XP-205_207_Series-epson-escpr-en.ppd Epson-XP-300_Series-epson-escpr-en.ppd Epson-XP-302_303_305_306_Series-epson-escpr-en.ppd Epson-XP-400_Series-epson-escpr-en.ppd Epson-XP-402_403_405_406_Series-epson-escpr-en.ppd Epson-XP-750_Series-epson-escpr-en.ppd Epson-XP-850_Series-epson-escpr-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/opt/etc/cups/ppd/Epson/epson-inkjet-printer-escpr' [ 65s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 65s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 65s] Making install in src [ 65s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 65s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 65s] make[3]: Nothing to be done for `install-exec-am'. [ 65s] test -z "/usr/lib/cups/filter" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/cups/filter" [ 65s] STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s epson-escpr epson-escpr-wrapper '/home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/cups/filter' [ 65s] libtool: install: warning: `../lib/libescpr.la' has not been installed in `/usr/lib' [ 65s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s .libs/epson-escpr /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/cups/filter/epson-escpr [ 65s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/install-sh -c -s epson-escpr-wrapper /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/lib/cups/filter/epson-escpr-wrapper [ 65s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 65s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 65s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 66s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 66s] make[3]: Nothing to be done for `install-exec-am'. [ 66s] make[3]: Nothing to be done for `install-data-am'. [ 66s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 66s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 66s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 66s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/share/license [ 66s] + cp /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/COPYING /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm/usr/share/license/epson-inkjet-printer-escpr [ 66s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2 [ 66s] WARNING: /usr/lib/cups/filter/epson-escpr is already stripped! [ 66s] WARNING: /usr/lib/cups/filter/epson-escpr-wrapper is already stripped! [ 66s] WARNING: /usr/lib/libescpr.so.1.0.0 is already stripped! [ 66s] + /usr/lib/rpm/brp-compress [ 66s] + /usr/lib/rpm/brp-tizen [ 66s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 66s] Processing files: epson-inkjet-printer-escpr-1.2.2-1.1.armv7l [ 66s] Aptk: PG1hbmlmZXN0PgogICAgICAgIDxyZXF1ZXN0PgogICAgICAgICAgICAgICAgPGRv [ 66s] bWFpbiBuYW1lPSJfIiAvPgogICAgICAgIDwvcmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 66s] [ 66s] Provides: epson-inkjet-printer-escpr = 1.2.2-1.1 epson-inkjet-printer-escpr(armv7l-32) = 1.2.2-1.1 libescpr.so.1 [ 66s] Requires(interp): /bin/sh /bin/sh [ 66s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 66s] Requires(post): /bin/sh [ 66s] Requires(postun): /bin/sh [ 66s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcups.so.2 libcupsimage.so.2 libescpr.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 66s] Processing files: epson-inkjet-printer-escpr-debugsource-1.2.2-1.1.armv7l [ 66s] Provides: epson-inkjet-printer-escpr-debugsource = 1.2.2-1.1 epson-inkjet-printer-escpr-debugsource(armv7l-32) = 1.2.2-1.1 [ 66s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 66s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 66s] warning: Could not canonicalize hostname: w19 [ 66s] Wrote: /home/abuild/rpmbuild/SRPMS/epson-inkjet-printer-escpr-1.2.2-1.1.src.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/epson-inkjet-printer-escpr-1.2.2-1.1.armv7l.rpm [ 66s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/epson-inkjet-printer-escpr-debugsource-1.2.2-1.1.armv7l.rpm [ 66s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6sN9yc [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd epson-inkjet-printer-escpr-1.2.2 [ 66s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 66s] + make clean [ 66s] Making clean in src [ 66s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 66s] rm -f epson-escpr epson-escpr-wrapper [ 66s] rm -rf .libs _libs [ 66s] rm -f *.o [ 66s] rm -f *.lo [ 67s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/src' [ 67s] Making clean in ppd [ 67s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 67s] rm -rf .libs _libs [ 67s] rm -f *.lo [ 67s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/ppd' [ 67s] Making clean in lib [ 67s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 67s] test -z "libescpr.la" || rm -f libescpr.la [ 67s] test -z "libescpr.la" || rm -f libescpr.la [ 67s] rm -f "./so_locations" [ 67s] rm -rf .libs _libs [ 67s] rm -f *.o [ 67s] rm -f *.lo [ 67s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2/lib' [ 67s] Making clean in . [ 67s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 67s] rm -rf .libs _libs [ 67s] rm -f *.lo [ 67s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-inkjet-printer-escpr-1.2.2' [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-inkjet-printer-escpr-1.2.2-1.1.arm [ 67s] + exit 0 [ 67s] ... checking for files with abuild user/group [ 67s] [ 67s] RPMLINT report: [ 67s] =============== [ 67s] qemu: Unsupported syscall: 311 [ 74s] epson-inkjet-printer-escpr.armv7l: E: non-standard-group (Badness: 200) Applications/System [ 74s] epson-inkjet-printer-escpr.src: E: non-standard-group (Badness: 200) Applications/System [ 74s] The value of the Group tag in the package is not valid. Valid groups are [ 74s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 74s] [ 74s] epson-inkjet-printer-escpr.src:19: W: macro-in-comment %define [ 74s] epson-inkjet-printer-escpr.src:88: W: macro-in-comment %doc [ 74s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 74s] are expanded everywhere, so check if it can cause a problem in this case and [ 74s] escape the macro with another leading % if appropriate. [ 74s] [ 74s] epson-inkjet-printer-escpr.armv7l: E: invalid-license (Badness: 200) GPL [ 74s] epson-inkjet-printer-escpr.src: E: invalid-license (Badness: 200) GPL [ 74s] The specified license string is not recognized. Please refer to [ 74s] http://spdx.org/licenses/ for the list of known licences and their exact [ 74s] spelling. [ 74s] [ 74s] epson-inkjet-printer-escpr.src:32: W: hardcoded-packager-tag Seiko [ 74s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 74s] to use rebuilder's own defaults. [ 74s] [ 74s] 2 packages and 0 specfiles checked; 4 errors, 3 warnings. [ 74s] [ 74s] ... creating baselibs [ 74s] qemu: Unsupported syscall: 311 [ 75s] ... saving built statistics [ 75s] ... saving built packages [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/epson-inkjet-printer-escpr-1.2.2-1.1.armv7l.rpm [ 75s] /home/abuild/rpmbuild/RPMS/armv7l/epson-inkjet-printer-escpr-debugsource-1.2.2-1.1.armv7l.rpm [ 75s] /home/abuild/rpmbuild/SRPMS/epson-inkjet-printer-escpr-1.2.2-1.1.src.rpm [ 75s] /home/abuild/rpmbuild/OTHER/_statistics [ 75s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 75s] [ 75s] w19 finished "build epson-inkjet-printer-escpr.spec" at Fri Jul 18 06:50:26 UTC 2014. [ 75s] [ 76s] Powering off. [ 76s] [ 66.324344] Power down. [ 76s] build: extracting built packages... [ 76s] epson-inkjet-printer-escpr-1.2.2-1.1.armv7l.rpm [ 76s] epson-inkjet-printer-escpr-debugsource-1.2.2-1.1.armv7l.rpm [ 76s] epson-inkjet-printer-escpr-1.2.2-1.1.src.rpm [ 76s] _statistics [ 76s] rpmlint.log