[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w24 started "build _service:gbs:epson-laser-printer-escpage.spec" at Fri Jul 18 06:49:10 UTC 2014. [ 0s] [ 0s] Building epson-laser-printer-escpage for project 'Tizen:3.0.M14.2:IVI' repository 'arm' arch 'armv7l' srcmd5 '3a51d4e95984a4c60d7d0f2c40fa7b09' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec build rpmlint-Factory ... [ 0s] cycle: bash -> libgcc_s1 [ 0s] breaking dependency libgcc_s1 -> bash [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 0s] [5/40] preinstalling libgcc_s1... [ 0s] [6/40] preinstalling bash... [ 0s] [7/40] preinstalling diffutils... [ 0s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling tar... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-armv7l-cross-arm... [ 4s] [26/40] preinstalling qemu-linux-user-cross-arm... [ 4s] [27/40] preinstalling libacl... [ 4s] [28/40] preinstalling libblkid... [ 4s] [29/40] preinstalling libreadline... [ 4s] [30/40] preinstalling smack... [ 4s] [31/40] preinstalling bzip2... [ 4s] [32/40] preinstalling libmagic... [ 4s] [33/40] preinstalling libxml2... [ 4s] [34/40] preinstalling nss... [ 4s] [35/40] preinstalling libmount... [ 4s] [36/40] preinstalling coreutils... [ 4s] [37/40] preinstalling libsoftokn3... [ 5s] [38/40] preinstalling rpm... [ 5s] [39/40] preinstalling util-linux... [ 5s] [40/40] preinstalling rpm-security-plugin... [ 5s] [ 5s] [1/8] preinstalling libext2fs... [ 5s] [2/8] preinstalling libpcre... [ 5s] [3/8] preinstalling libuuid... [ 5s] [4/8] preinstalling perl... [ 6s] [5/8] preinstalling grep... [ 6s] [6/8] preinstalling libblkid... [ 6s] [7/8] preinstalling libmount... [ 6s] [8/8] preinstalling util-linux... [ 6s] copying packages... [ 6s] reordering...cycle: bash -> libgcc_s1 [ 6s] breaking dependency libgcc_s1 -> bash [ 6s] cycle: coreutils -> pam [ 6s] breaking dependency coreutils -> pam [ 6s] cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 7s] booting kvm ... [ 7s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8192 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 4 [ 9s] doing fast boot [ 9s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 5981/2392064 files, 241294/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 9s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] /.build/qemu-reg: line 7: interpreter '/usr/bin/qemu-arm64-binfmt' not found, ignoring [ 10s] 2nd stage started in virtual machine [ 10s] machine type: armv7l [ 10s] swapon /dev/vdb [ 10s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 10s] mount: none is already mounted or /proc busy [ 10s] mount: none is already mounted or /dev/pts busy [ 10s] logging output to //.build.log... [ 10s] processing specfile /.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec ... [ 10s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec build rpmlint-Factory ... [ 10s] running qemu-accel-armv7l-cross-arm postinstall script [ 10s] ++ uname -m [ 10s] + '[' armv7l = armv7l ']' [ 10s] + builtin echo armv7l arch [ 10s] armv7l arch [ 10s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 10s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 10s] + did_mount_it= [ 10s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 10s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 10s] + builtin echo Registering accelerated handler [ 10s] Registering accelerated handler [ 10s] + builtin echo -1 [ 10s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 10s] + '[' ']' [ 10s] + builtin echo All done [ 10s] All done [ 10s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 10s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 10s] + builtin echo 0 [ 10s] running setup postinstall script [ 10s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 10s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 10s] initializing rpm db... [ 12s] [1/121] installing hwdata-0.260-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [2/121] installing libmagic-data-5.11-1.2 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [3/121] installing setup-0.9-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [4/121] installing terminfo-base-5.9-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [5/121] installing filesystem-3.1-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [6/121] installing glibc-2.18-1.2 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [7/121] installing libgcc_s1-4.8.2-1.2 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [8/121] installing bash-4.2-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [9/121] installing cpio-2.11-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [10/121] installing diffutils-3.3-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [11/121] installing findutils-4.5.10-1.1 [ 12s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 12s] [12/121] installing gawk-4.0.1-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [13/121] installing hostname-3.12-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [14/121] installing libattr-2.4.46-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [15/121] installing libbz2-1.0.6-1.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [16/121] installing libcap-2.24-1.2 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [17/121] installing libdbus-1.6.12-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [18/121] installing libelf-0.155-1.3 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [19/121] installing libexpat-2.1.0-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [20/121] installing libext2fs-1.42.6-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [21/121] installing libfreebl3-3.15.4-1.6 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [22/121] installing libgdbm-1.10-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [23/121] installing libgmp-5.1.3-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [24/121] installing libgpg-error-1.10-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [25/121] installing libjpeg-8.0.2-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 13s] [26/121] installing libltdl-2.4.2-1.1 [ 13s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [27/121] installing liblua-5.1.4-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [28/121] installing liblzma-5.0.3-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [29/121] installing libpcre-8.31-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [30/121] installing libpopt-1.16-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [31/121] installing libsmack-1.0.3.1-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [32/121] installing libsqlite-3.7.14-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [33/121] installing libuuid-2.24-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [34/121] installing m4-1.4.16-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [35/121] installing net-tools-2.0_20121208git-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [36/121] installing nspr-4.10.2-1.2 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [37/121] installing patch-2.7-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [38/121] installing pkg-config-0.28-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [39/121] installing sed-4.2.1-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [40/121] installing tar-1.27-1.1 [ 14s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 14s] [41/121] installing update-alternatives-1.16.3-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [42/121] installing which-2.20-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [43/121] installing zlib-1.2.7-1.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [44/121] installing libncurses-5.9-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [45/121] installing build-compare-2012.01.26-1.2 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [46/121] installing libjpeg-devel-8.0.2-1.1 [ 15s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 15s] [47/121] installing qemu-accel-armv7l-cross-arm-0.4-2.10 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] ++ uname -m [ 19s] + '[' armv7l = armv7l ']' [ 19s] + builtin echo armv7l arch [ 19s] armv7l arch [ 19s] + ln -sf '%{our_path}/lib/libnsl.so.1' /lib/libnsl.so.1 [ 19s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 19s] + did_mount_it= [ 19s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 19s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 19s] + builtin echo Registering accelerated handler [ 19s] Registering accelerated handler [ 19s] + builtin echo -1 [ 19s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 19s] + '[' ']' [ 19s] + builtin echo All done [ 19s] All done [ 19s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 19s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 19s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 19s] + builtin echo 0 [ 19s] [48/121] installing qemu-linux-user-cross-arm-1.6.0-5.10 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [49/121] installing grep-2.16-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [50/121] installing less-458-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [51/121] installing libacl-2.2.51-1.1 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [52/121] installing libasm-0.155-1.3 [ 19s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 19s] [53/121] installing libatomic-4.8.2-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [54/121] installing libblkid-2.24-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [55/121] installing libgcrypt-1.5.0-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [56/121] installing libgomp-4.8.2-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [57/121] installing libitm-4.8.2-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [58/121] installing libmpfr-3.1.1-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [59/121] installing libopenssl-1.0.1h-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [60/121] installing libpng-1.2.50-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [61/121] installing libreadline-5.2-1.1 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [62/121] installing libstdc++-4.8.2-1.2 [ 20s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 20s] [63/121] installing make-3.82-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [64/121] installing nss-certs-3.15.4-1.6 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [65/121] installing smack-1.0.3.1-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [66/121] installing bzip2-1.0.6-1.3 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [67/121] installing libkmod-15-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [68/121] installing libmagic-5.11-1.2 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [69/121] installing libxml2-2.8.0-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [70/121] installing xz-5.0.3-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [71/121] installing binutils-2.23.1-1.1 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 21s] [72/121] installing libdw-0.155-1.3 [ 21s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 21s] [73/121] installing db4-4.8.30.NC-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [74/121] installing file-5.11-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [75/121] installing openssl-1.0.1h-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [76/121] installing libasan-4.8.2-1.2 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [77/121] installing libmount-2.24-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [78/121] installing libmpc-1.0-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [79/121] installing cups-libs-1.6.4-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [80/121] installing libtiff-4.0.2-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [81/121] installing elfutils-0.155-1.3 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [82/121] installing nss-3.15.4-1.6 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [83/121] installing coreutils-8.21-1.1 [ 22s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 22s] [84/121] installing linux-glibc-devel-3.10-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [85/121] installing glibc-locale-2.18-1.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [86/121] installing gzip-1.6-1.1 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [87/121] installing pam-1.1.6-1.2 [ 23s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 23s] [88/121] installing cpp48-4.8.2-1.2 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [89/121] installing tzdata-2012e-1.1 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [90/121] installing libsoftokn3-3.15.4-1.6 [ 24s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 24s] [91/121] installing perl-5.16.3-1.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [92/121] installing rpm-4.11.0.1-1.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [93/121] installing build-mkbaselibs-20120927-1.2 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 25s] [94/121] installing cpp-4.8-1.1 [ 25s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [95/121] installing glibc-devel-2.18-1.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [96/121] installing autoconf-2.69-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [97/121] installing pam-devel-1.1.6-1.2 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [98/121] installing pwdutils-3.2.19-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [99/121] installing libsystemd-208-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [100/121] installing util-linux-2.24-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [101/121] installing rpmlint-mini-1.4-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [102/121] installing rpm-security-plugin-4.11.0.1-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [103/121] installing rpmlint-tizen-1.0-1.1 [ 26s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 26s] [104/121] installing libstdc++48-devel-4.8.2-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [105/121] installing zlib-devel-1.2.7-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [106/121] installing automake-1.12.1-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [107/121] installing build-20120927-1.2 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [108/121] installing dbus-1.6.12-1.1 [ 27s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 27s] [109/121] installing gcc48-4.8.2-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [110/121] installing libstdc++-devel-4.8-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [111/121] installing gcc-4.8-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [112/121] installing libopenssl-devel-1.0.1h-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [113/121] installing libpng-devel-1.2.50-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [114/121] installing libtool-2.4.2-1.1 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [115/121] installing gcc48-c++-4.8.2-1.2 [ 28s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 28s] [116/121] installing systemd-208-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [117/121] installing gcc-c++-4.8-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [118/121] installing systemd-devel-208-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [119/121] installing libtiff-devel-4.0.2-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [120/121] installing rpm-build-4.11.0.1-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] [121/121] installing cups-devel-1.6.4-1.1 [ 29s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 29s] removing nis flags from //etc/nsswitch.conf... [ 29s] now finalizing build dir... [ 30s] qemu: Unsupported syscall: 311 [ 35s] build target is armv7l-tizen-linux [ 35s] ----------------------------------------------------------------- [ 35s] I have the following modifications for epson-laser-printer-escpage.spec: [ 35s] 11c11 [ 35s] < Release: 8 [ 35s] --- [ 35s] > Release: 1.1 [ 35s] 77a78 [ 35s] > %changelog [ 35s] ----------------------------------------------------------------- [ 35s] ----- building epson-laser-printer-escpage.spec (user abuild) [ 35s] ----------------------------------------------------------------- [ 35s] ----------------------------------------------------------------- [ 35s] qemu: Unsupported syscall: 311 [ 35s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/arm/3a51d4e95984a4c60d7d0f2c40fa7b09-epson-laser-printer-escpage' /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage.spec [ 35s] Building target platforms: armv7l-tizen-linux [ 35s] Building for target armv7l-tizen-linux [ 35s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SOZzPK [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + rm -rf epson-laser-printer-escpage-1.0.1 [ 35s] + /bin/tar -xf - [ 35s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage-1.0.1.tar.gz [ 35s] + STATUS=0 [ 35s] + '[' 0 -ne 0 ']' [ 35s] + cd epson-laser-printer-escpage-1.0.1 [ 35s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 35s] + cp /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage.manifest . [ 35s] + echo 'Patch #0 (tizen_disable_unused_value.patch):' [ 35s] Patch #0 (tizen_disable_unused_value.patch): [ 35s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_disable_unused_value.patch [ 35s] + /bin/patch -p0 --fuzz=2 [ 35s] patching file lib/epson-escpr-api.c [ 35s] + echo 'Patch #1 (tizen_add_job_media_progress.patch):' [ 35s] Patch #1 (tizen_add_job_media_progress.patch): [ 35s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_add_job_media_progress.patch [ 35s] + /bin/patch -p1 --fuzz=2 [ 35s] patching file src/filter.c [ 35s] + echo 'Patch #2 (tizen_report_page_info.patch):' [ 35s] Patch #2 (tizen_report_page_info.patch): [ 35s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_report_page_info.patch [ 35s] + /bin/patch -p1 --fuzz=2 [ 35s] patching file src/filter.c [ 35s] + echo 'Patch #3 (tizen_fix_ignore_sigpipe.patch):' [ 35s] Patch #3 (tizen_fix_ignore_sigpipe.patch): [ 35s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_fix_ignore_sigpipe.patch [ 35s] + /bin/patch -p1 --fuzz=2 [ 35s] patching file src/filter.c [ 35s] + exit 0 [ 35s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.e3ZwTu [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd epson-laser-printer-escpage-1.0.1 [ 35s] + LANG=C [ 35s] + export LANG [ 35s] + unset DISPLAY [ 35s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 35s] + export CFLAGS [ 35s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 35s] + export CXXFLAGS [ 35s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -I%_fmoddir' [ 35s] + export FFLAGS [ 35s] + LD_AS_NEEDED=1 [ 35s] + export LD_AS_NEEDED [ 35s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 35s] + export CFLAGS [ 35s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g' [ 35s] + export CXXFLAGS [ 35s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -I%_fmoddir' [ 35s] + export FFLAGS [ 35s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-cupsfilterdir=/usr/lib/cups/filter --with-cupsppddir=/opt/etc/cups/ppd/Epson [ 37s] checking for a BSD-compatible install... /usr/bin/install -c [ 38s] checking whether build environment is sane... yes [ 38s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 38s] checking for gawk... gawk [ 38s] checking whether make sets $(MAKE)... yes [ 38s] checking for armv7l-tizen-linux-gnueabi-gcc... no [ 38s] checking for gcc... gcc [ 38s] checking whether the C compiler works... yes [ 38s] checking for C compiler default output file name... a.out [ 38s] checking for suffix of executables... [ 38s] checking whether we are cross compiling... no [ 38s] checking for suffix of object files... o [ 38s] checking whether we are using the GNU C compiler... yes [ 38s] checking whether gcc accepts -g... yes [ 38s] checking for gcc option to accept ISO C89... none needed [ 39s] checking for style of include used by make... GNU [ 39s] checking dependency style of gcc... gcc3 [ 39s] checking for an ANSI C-conforming const... yes [ 39s] checking how to run the C preprocessor... gcc -E [ 39s] checking whether ln -s works... yes [ 39s] checking build system type... armv7l-tizen-linux-gnueabi [ 39s] checking host system type... armv7l-tizen-linux-gnueabi [ 39s] checking for a sed that does not truncate output... /usr/bin/sed [ 39s] checking for grep that handles long lines and -e... /usr/bin/grep [ 40s] checking for egrep... /usr/bin/grep -E [ 40s] checking for fgrep... /usr/bin/grep -F [ 40s] checking for ld used by gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 40s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 40s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 40s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 40s] checking the maximum length of command line arguments... 1572864 [ 40s] checking whether the shell understands some XSI constructs... yes [ 40s] checking whether the shell understands "+="... yes [ 40s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 40s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 40s] checking for objdump... objdump [ 40s] checking how to recognize dependent libraries... pass_all [ 40s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 40s] checking for ar... ar [ 40s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 40s] checking for strip... strip [ 40s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 40s] checking for ranlib... ranlib [ 40s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 40s] checking for ANSI C header files... yes [ 40s] checking for sys/types.h... yes [ 41s] checking for sys/stat.h... yes [ 41s] checking for stdlib.h... yes [ 41s] checking for string.h... yes [ 41s] checking for memory.h... yes [ 41s] checking for strings.h... yes [ 41s] checking for inttypes.h... yes [ 41s] checking for stdint.h... yes [ 41s] checking for unistd.h... yes [ 41s] checking for dlfcn.h... yes [ 41s] checking for objdir... .libs [ 42s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 42s] checking for gcc option to produce PIC... -fPIC -DPIC [ 42s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 42s] checking if gcc static flag -static works... no [ 42s] checking if gcc supports -c -o file.o... yes [ 42s] checking if gcc supports -c -o file.o... (cached) yes [ 42s] checking whether the gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 42s] checking whether -lc should be explicitly linked in... no [ 42s] checking dynamic linker characteristics... GNU/Linux ld.so [ 42s] checking how to hardcode library paths into programs... immediate [ 42s] checking whether stripping libraries is possible... yes [ 42s] checking if libtool supports shared libraries... yes [ 42s] checking whether to build shared libraries... yes [ 42s] checking whether to build static libraries... yes [ 42s] checking whether gcc and cc understand -c and -o together... yes [ 42s] checking for cups-config... yes [ 42s] checking for ANSI C header files... (cached) yes [ 42s] checking whether stat file-mode macros are broken... no [ 42s] checking whether time.h and sys/time.h may both be included... yes [ 43s] checking whether struct tm is in sys/time.h or time.h... time.h [ 43s] checking for pid_t... yes [ 43s] checking for size_t... yes [ 43s] checking cups/cups.h usability... yes [ 43s] checking cups/cups.h presence... yes [ 43s] checking for cups/cups.h... yes [ 43s] checking cups/ppd.h usability... yes [ 43s] checking cups/ppd.h presence... yes [ 43s] checking for cups/ppd.h... yes [ 43s] checking cups/raster.h usability... yes [ 43s] checking cups/raster.h presence... yes [ 43s] checking for cups/raster.h... yes [ 43s] checking ctype.h usability... yes [ 43s] checking ctype.h presence... yes [ 43s] checking for ctype.h... yes [ 43s] checking errno.h usability... yes [ 44s] checking errno.h presence... yes [ 44s] checking for errno.h... yes [ 44s] checking fcntl.h usability... yes [ 44s] checking fcntl.h presence... yes [ 44s] checking for fcntl.h... yes [ 44s] checking malloc.h usability... yes [ 44s] checking malloc.h presence... yes [ 44s] checking for malloc.h... yes [ 44s] checking signal.h usability... yes [ 44s] checking signal.h presence... yes [ 44s] checking for signal.h... yes [ 44s] checking stdarg.h usability... yes [ 44s] checking stdarg.h presence... yes [ 44s] checking for stdarg.h... yes [ 44s] checking stddef.h usability... yes [ 44s] checking stddef.h presence... yes [ 44s] checking for stddef.h... yes [ 44s] checking for stdlib.h... (cached) yes [ 44s] checking for string.h... (cached) yes [ 44s] checking for sys/stat.h... (cached) yes [ 44s] checking for sys/types.h... (cached) yes [ 44s] checking time.h usability... yes [ 44s] checking time.h presence... yes [ 44s] checking for time.h... yes [ 44s] checking for unistd.h... (cached) yes [ 45s] checking for ppdOpenFile in -lcups... yes [ 45s] checking for cupsRasterOpen in -lcupsimage... yes [ 45s] checking for stdlib.h... (cached) yes [ 45s] checking for GNU libc compatible malloc... yes [ 45s] checking for working memcmp... yes [ 45s] checking return type of signal handlers... void [ 45s] checking for memset... yes [ 45s] checking for strcspn... yes [ 45s] checking for strerror... yes [ 45s] checking for strrchr... yes [ 46s] configure: creating ./config.status [ 48s] config.status: creating Makefile [ 48s] config.status: creating lib/Makefile [ 48s] config.status: creating epson-laser-printer-escpage.spec [ 48s] config.status: creating ppd/Makefile [ 48s] config.status: creating src/Makefile [ 48s] config.status: creating config.h [ 49s] config.status: executing depfiles commands [ 49s] config.status: executing libtool commands [ 50s] + make [ 50s] make all-recursive [ 50s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] Making all in lib [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c -o libescpage_la-epson-cbt.lo `test -f 'epson-cbt.c' || echo './'`epson-cbt.c [ 50s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c epson-cbt.c -fPIC -DPIC -o .libs/libescpage_la-epson-cbt.o [ 50s] epson-cbt.c: In function 'commClose': [ 50s] epson-cbt.c:654:15: warning: variable 'closePtlState' set but not used [-Wunused-but-set-variable] [ 50s] EPS_INT32 closePtlState = 0; [ 50s] ^ [ 51s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c epson-cbt.c -o libescpage_la-epson-cbt.o >/dev/null 2>&1 [ 51s] mv -f .deps/libescpage_la-epson-cbt.Tpo .deps/libescpage_la-epson-cbt.Plo [ 51s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c -o libescpage_la-epson-escpage.lo `test -f 'epson-escpage.c' || echo './'`epson-escpage.c [ 51s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c epson-escpage.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage.o [ 51s] epson-escpage.c: In function 'pageInitJob': [ 51s] epson-escpage.c:205:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 51s] debug_msg("__ Number = %d __\n", dim(pagePaperSource) ); [ 51s] ^ [ 52s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c epson-escpage.c -o libescpage_la-epson-escpage.o >/dev/null 2>&1 [ 52s] mv -f .deps/libescpage_la-epson-escpage.Tpo .deps/libescpage_la-epson-escpage.Plo [ 52s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c -o libescpage_la-epson-escpage-color.lo `test -f 'epson-escpage-color.c' || echo './'`epson-escpage-color.c [ 52s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c epson-escpage-color.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-color.o [ 52s] epson-escpage-color.c: In function 'pageStartJob_C': [ 52s] epson-escpage-color.c:307:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 52s] debug_msg("__ debug 0 __\n"); [ 52s] ^ [ 53s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c epson-escpage-color.c -o libescpage_la-epson-escpage-color.o >/dev/null 2>&1 [ 53s] mv -f .deps/libescpage_la-epson-escpage-color.Tpo .deps/libescpage_la-epson-escpage-color.Plo [ 53s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c -o libescpage_la-epson-escpage-comp.lo `test -f 'epson-escpage-comp.c' || echo './'`epson-escpage-comp.c [ 53s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-comp.o [ 53s] epson-escpage-comp.c:95:6: warning: missing braces around initializer [-Wmissing-braces] [ 53s] = { 0x00, 2, 0x02, 2, 0x01, 2, 0x03, 4, 0x0b, 4, [ 53s] ^ [ 53s] epson-escpage-comp.c:95:6: warning: (near initialization for 'HufmanDefTable3[0]') [-Wmissing-braces] [ 53s] epson-escpage-comp.c: In function 'CompressBitImage': [ 53s] epson-escpage-comp.c:159:2: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 53s] debug_msg("dwwkBufferSize = %d\n", dwwkBufferSize); [ 53s] ^ [ 53s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -o libescpage_la-epson-escpage-comp.o >/dev/null 2>&1 [ 54s] mv -f .deps/libescpage_la-epson-escpage-comp.Tpo .deps/libescpage_la-epson-escpage-comp.Plo [ 54s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c -o libescpage_la-epson-escpage-mono.lo `test -f 'epson-escpage-mono.c' || echo './'`epson-escpage-mono.c [ 54s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-mono.o [ 54s] epson-escpage-mono.c: In function 'pageStartJob_M': [ 54s] epson-escpage-mono.c:421:2: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 54s] debug_msg("start Job MONO\n"); [ 54s] ^ [ 54s] epson-escpage-mono.c: In function 'BandInit': [ 54s] epson-escpage-mono.c:1143:25: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] [ 54s] memset(pBand, 0, sizeof(pBand)); [ 54s] ^ [ 54s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -o libescpage_la-epson-escpage-mono.o >/dev/null 2>&1 [ 55s] mv -f .deps/libescpage_la-epson-escpage-mono.Tpo .deps/libescpage_la-epson-escpage-mono.Plo [ 55s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c -o libescpage_la-epson-escpr-api.lo `test -f 'epson-escpr-api.c' || echo './'`epson-escpr-api.c [ 55s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c epson-escpr-api.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-api.o [ 55s] epson-escpr-api.c: In function 'SetupJobAttrib': [ 55s] epson-escpr-api.c:3410:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 55s] debug_msg("ccheck call function start Job \n"); [ 55s] ^ [ 56s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c epson-escpr-api.c -o libescpage_la-epson-escpr-api.o >/dev/null 2>&1 [ 57s] mv -f .deps/libescpage_la-epson-escpr-api.Tpo .deps/libescpage_la-epson-escpr-api.Plo [ 57s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c -o libescpage_la-epson-escpr-dbg.lo `test -f 'epson-escpr-dbg.c' || echo './'`epson-escpr-dbg.c [ 57s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-dbg.o [ 57s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -o libescpage_la-epson-escpr-dbg.o >/dev/null 2>&1 [ 57s] mv -f .deps/libescpage_la-epson-escpr-dbg.Tpo .deps/libescpage_la-epson-escpr-dbg.Plo [ 57s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c -o libescpage_la-epson-escpr-mem.lo `test -f 'epson-escpr-mem.c' || echo './'`epson-escpr-mem.c [ 58s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-mem.o [ 58s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -o libescpage_la-epson-escpr-mem.o >/dev/null 2>&1 [ 58s] mv -f .deps/libescpage_la-epson-escpr-mem.Tpo .deps/libescpage_la-epson-escpr-mem.Plo [ 58s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c -o libescpage_la-epson-escpr-services.lo `test -f 'epson-escpr-services.c' || echo './'`epson-escpr-services.c [ 58s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c epson-escpr-services.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-services.o [ 58s] epson-escpr-services.c: In function 'serParseDeviceID': [ 58s] epson-escpr-services.c:341:10: warning: 'k' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 58s] if(k)*k = ','; [ 58s] ^ [ 58s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c epson-escpr-services.c -o libescpage_la-epson-escpr-services.o >/dev/null 2>&1 [ 59s] mv -f .deps/libescpage_la-epson-escpr-services.Tpo .deps/libescpage_la-epson-escpr-services.Plo [ 59s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c -o libescpage_la-epson-layout.lo `test -f 'epson-layout.c' || echo './'`epson-layout.c [ 59s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c epson-layout.c -fPIC -DPIC -o .libs/libescpage_la-epson-layout.o [ 59s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c epson-layout.c -o libescpage_la-epson-layout.o >/dev/null 2>&1 [ 59s] mv -f .deps/libescpage_la-epson-layout.Tpo .deps/libescpage_la-epson-layout.Plo [ 59s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c -o libescpage_la-epson-net-lpr.lo `test -f 'epson-net-lpr.c' || echo './'`epson-net-lpr.c [ 60s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c epson-net-lpr.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-lpr.o [ 60s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c epson-net-lpr.c -o libescpage_la-epson-net-lpr.o >/dev/null 2>&1 [ 60s] mv -f .deps/libescpage_la-epson-net-lpr.Tpo .deps/libescpage_la-epson-net-lpr.Plo [ 60s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c -o libescpage_la-epson-net-raw.lo `test -f 'epson-net-raw.c' || echo './'`epson-net-raw.c [ 60s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c epson-net-raw.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-raw.o [ 60s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c epson-net-raw.c -o libescpage_la-epson-net-raw.o >/dev/null 2>&1 [ 61s] mv -f .deps/libescpage_la-epson-net-raw.Tpo .deps/libescpage_la-epson-net-raw.Plo [ 61s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c -o libescpage_la-epson-net-snmp.lo `test -f 'epson-net-snmp.c' || echo './'`epson-net-snmp.c [ 61s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c epson-net-snmp.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-snmp.o [ 61s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c epson-net-snmp.c -o libescpage_la-epson-net-snmp.o >/dev/null 2>&1 [ 62s] mv -f .deps/libescpage_la-epson-net-snmp.Tpo .deps/libescpage_la-epson-net-snmp.Plo [ 62s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c -o libescpage_la-epson-protocol.lo `test -f 'epson-protocol.c' || echo './'`epson-protocol.c [ 62s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c epson-protocol.c -fPIC -DPIC -o .libs/libescpage_la-epson-protocol.o [ 62s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c epson-protocol.c -o libescpage_la-epson-protocol.o >/dev/null 2>&1 [ 63s] mv -f .deps/libescpage_la-epson-protocol.Tpo .deps/libescpage_la-epson-protocol.Plo [ 63s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c -o libescpage_la-epson-usb.lo `test -f 'epson-usb.c' || echo './'`epson-usb.c [ 63s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c epson-usb.c -fPIC -DPIC -o .libs/libescpage_la-epson-usb.o [ 63s] epson-usb.c: In function 'usbResetPrinter': [ 63s] epson-usb.c:670:21: warning: variable 'retBufSize' set but not used [-Wunused-but-set-variable] [ 63s] EPS_INT32 retBufSize; /* Size of buffer written */ [ 63s] ^ [ 63s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c epson-usb.c -o libescpage_la-epson-usb.o >/dev/null 2>&1 [ 64s] mv -f .deps/libescpage_la-epson-usb.Tpo .deps/libescpage_la-epson-usb.Plo [ 64s] /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -O2 -version-info 1:1:0 -o libescpage.la -rpath /usr/lib libescpage_la-epson-cbt.lo libescpage_la-epson-escpage.lo libescpage_la-epson-escpage-color.lo libescpage_la-epson-escpage-comp.lo libescpage_la-epson-escpage-mono.lo libescpage_la-epson-escpr-api.lo libescpage_la-epson-escpr-dbg.lo libescpage_la-epson-escpr-mem.lo libescpage_la-epson-escpr-services.lo libescpage_la-epson-layout.lo libescpage_la-epson-net-lpr.lo libescpage_la-epson-net-raw.lo libescpage_la-epson-net-snmp.lo libescpage_la-epson-protocol.lo libescpage_la-epson-usb.lo -lcupsimage -lcups [ 65s] libtool: link: gcc -shared .libs/libescpage_la-epson-cbt.o .libs/libescpage_la-epson-escpage.o .libs/libescpage_la-epson-escpage-color.o .libs/libescpage_la-epson-escpage-comp.o .libs/libescpage_la-epson-escpage-mono.o .libs/libescpage_la-epson-escpr-api.o .libs/libescpage_la-epson-escpr-dbg.o .libs/libescpage_la-epson-escpr-mem.o .libs/libescpage_la-epson-escpr-services.o .libs/libescpage_la-epson-layout.o .libs/libescpage_la-epson-net-lpr.o .libs/libescpage_la-epson-net-raw.o .libs/libescpage_la-epson-net-snmp.o .libs/libescpage_la-epson-protocol.o .libs/libescpage_la-epson-usb.o -lcupsimage -lcups -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wl,-soname -Wl,libescpage.so.1 -o .libs/libescpage.so.1.0.1 [ 65s] libtool: link: (cd ".libs" && rm -f "libescpage.so.1" && ln -s "libescpage.so.1.0.1" "libescpage.so.1") [ 65s] libtool: link: (cd ".libs" && rm -f "libescpage.so" && ln -s "libescpage.so.1.0.1" "libescpage.so") [ 65s] libtool: link: ar cru .libs/libescpage.a libescpage_la-epson-cbt.o libescpage_la-epson-escpage.o libescpage_la-epson-escpage-color.o libescpage_la-epson-escpage-comp.o libescpage_la-epson-escpage-mono.o libescpage_la-epson-escpr-api.o libescpage_la-epson-escpr-dbg.o libescpage_la-epson-escpr-mem.o libescpage_la-epson-escpr-services.o libescpage_la-epson-layout.o libescpage_la-epson-net-lpr.o libescpage_la-epson-net-raw.o libescpage_la-epson-net-snmp.o libescpage_la-epson-protocol.o libescpage_la-epson-usb.o [ 65s] libtool: link: ranlib .libs/libescpage.a [ 65s] libtool: link: ( cd ".libs" && rm -f "libescpage.la" && ln -s "../libescpage.la" "libescpage.la" ) [ 65s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 65s] Making all in ppd [ 65s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 65s] make[2]: Nothing to be done for `all'. [ 65s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 65s] Making all in src [ 65s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 65s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpage-filter.o -MD -MP -MF .deps/epson_escpage-filter.Tpo -c -o epson_escpage-filter.o `test -f 'filter.c' || echo './'`filter.c [ 65s] filter.c: In function 'epsGetInputOption': [ 65s] filter.c:316:7: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 65s] } else if(str_tmp = strstr(in_argv[i], "Duplex=DuplexTumble")){ [ 65s] ^ [ 65s] filter.c:334:7: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 65s] } else if(str_tmp = strstr(in_argv[i], "Orientation=Landscape")){ [ 65s] ^ [ 65s] filter.c: In function 'getOptionForJob': [ 65s] filter.c:370:3: warning: passing argument 1 of 'epsGetInputOption' from incompatible pointer type [enabled by default] [ 65s] error = epsGetInputOption (argv, argc, key, opt_t); [ 65s] ^ [ 65s] filter.c:266:5: note: expected 'char **' but argument is of type 'const char **' [ 65s] int epsGetInputOption(char** in_argv,int in_argc, char *opt, char *dest) [ 65s] ^ [ 65s] filter.c:368:8: warning: unused variable 'opt_tem' [-Wunused-variable] [ 65s] char opt_tem[256]; [ 65s] ^ [ 65s] filter.c: In function 'setupOptionforJob': [ 65s] filter.c:392:9: warning: unused variable 'err' [-Wunused-variable] [ 65s] char *err = NULL; [ 65s] ^ [ 65s] filter.c:391:7: warning: unused variable 'i' [-Wunused-variable] [ 65s] int i; /* loop */ [ 65s] ^ [ 65s] filter.c: In function 'main': [ 65s] filter.c:651:3: warning: passing argument 1 of 'setupOptionforJob' from incompatible pointer type [enabled by default] [ 65s] resul = setupOptionforJob(argv, argc, &fopt, argv[0]); [ 65s] ^ [ 65s] filter.c:386:12: note: expected 'const char **' but argument is of type 'char **' [ 65s] static int setupOptionforJob(const char** argv, const int argc, EPS_JOB_ATTRIB *jobAttr, const char *printer) [ 65s] ^ [ 65s] filter.c:665:5: warning: implicit declaration of function 'do_printJob' [-Wimplicit-function-declaration] [ 65s] do_printJob(pfp, ras, fopt); [ 65s] ^ [ 65s] filter.c:621:22: warning: unused variable 'header' [-Wunused-variable] [ 65s] cups_page_header_t header; /* page device dictionary header */ [ 65s] ^ [ 65s] filter.c: In function 'do_printJob': [ 65s] filter.c:742:3: warning: 'cupsRasterReadHeader' is deprecated (declared at /usr/include/cups/raster.h:370) [-Wdeprecated-declarations] [ 65s] while (cupsRasterReadHeader (ras, &header) > 0 && !cancel_flg) [ 65s] ^ [ 65s] filter.c:756:7: warning: implicit declaration of function 'SetupJobAttrib' [-Wimplicit-function-declaration] [ 65s] err = SetupJobAttrib(&jobAttr); [ 65s] ^ [ 65s] filter.c:897:13: warning: implicit declaration of function 'PrintBand' [-Wimplicit-function-declaration] [ 65s] err = PrintBand (grayBuff, band_out_len*band_line*3, &heightPixels); [ 65s] ^ [ 65s] filter.c:866:9: warning: unused variable 'y_count' [-Wunused-variable] [ 65s] int y_count = 0; [ 65s] ^ [ 65s] filter.c:844:14: warning: unused variable 'total_bytes' [-Wunused-variable] [ 65s] long int total_bytes = 0; [ 65s] ^ [ 65s] filter.c:842:11: warning: variable 'pPrint' set but not used [-Wunused-but-set-variable] [ 65s] char *pPrint; [ 65s] ^ [ 65s] filter.c:748:10: warning: unused variable 'tmpbuf' [-Wunused-variable] [ 65s] char tmpbuf[256]; [ 65s] ^ [ 65s] filter.c:747:9: warning: unused variable 'write_size' [-Wunused-variable] [ 65s] int write_size = 0; [ 65s] ^ [ 65s] filter.c:726:10: warning: unused variable 'j' [-Wunused-variable] [ 65s] int i, j; [ 65s] ^ [ 65s] filter.c:726:7: warning: unused variable 'i' [-Wunused-variable] [ 65s] int i, j; [ 65s] ^ [ 65s] filter.c:723:7: warning: variable 'read_size' set but not used [-Wunused-but-set-variable] [ 65s] int read_size = 0; [ 65s] ^ [ 65s] filter.c:721:19: warning: variable 'topMargin' set but not used [-Wunused-but-set-variable] [ 65s] int leftMargin, topMargin; [ 65s] ^ [ 65s] filter.c:721:7: warning: variable 'leftMargin' set but not used [-Wunused-but-set-variable] [ 65s] int leftMargin, topMargin; [ 65s] ^ [ 65s] filter.c:720:9: warning: unused variable 'image_raw' [-Wunused-variable] [ 65s] char *image_raw; [ 65s] ^ [ 65s] filter.c:719:24: warning: variable 'print_area_y' set but not used [-Wunused-but-set-variable] [ 65s] double print_area_x, print_area_y; [ 65s] ^ [ 65s] filter.c:719:10: warning: variable 'print_area_x' set but not used [-Wunused-but-set-variable] [ 65s] double print_area_x, print_area_y; [ 65s] ^ [ 65s] filter.c:715:8: warning: unused variable 'cBuff' [-Wunused-variable] [ 65s] char cBuff[256]; [ 65s] ^ [ 65s] filter.c: In function 'epsInitLib': [ 65s] filter.c:142:1: warning: control reaches end of non-void function [-Wreturn-type] [ 65s] } [ 65s] ^ [ 65s] filter.c: In function 'getOptionForJob': [ 65s] filter.c:370:9: warning: 'opt_t' is used uninitialized in this function [-Wuninitialized] [ 65s] error = epsGetInputOption (argv, argc, key, opt_t); [ 65s] ^ [ 65s] filter.c: In function 'do_printJob': [ 65s] filter.c:827:20: warning: 'width_pixel' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 65s] bytes_per_line = (width_pixel * byte_par_pixel); [ 65s] ^ [ 65s] filter.c: In function 'main': [ 65s] filter.c:657:7: warning: 'fd' is used uninitialized in this function [-Wuninitialized] [ 65s] ras = cupsRasterOpen (fd, CUPS_RASTER_READ); [ 65s] ^ [ 65s] filter.c:665:16: warning: 'pfp' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 65s] do_printJob(pfp, ras, fopt); [ 65s] ^ [ 65s] mv -f .deps/epson_escpage-filter.Tpo .deps/epson_escpage-filter.Po [ 65s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpage-err.o -MD -MP -MF .deps/epson_escpage-err.Tpo -c -o epson_escpage-err.o `test -f 'err.c' || echo './'`err.c [ 65s] err.c: In function 'debugt_msg': [ 65s] err.c:106:2: warning: 'return' with a value, in function returning void [enabled by default] [ 65s] return 0; [ 65s] ^ [ 65s] err.c: At top level: [ 65s] err.c:43:14: warning: 'debug_f' defined but not used [-Wunused-variable] [ 65s] static FILE *debug_f = NULL; [ 65s] ^ [ 65s] err.c:44:14: warning: 'debug_f2' defined but not used [-Wunused-variable] [ 65s] static FILE *debug_f2 = NULL; [ 65s] ^ [ 65s] mv -f .deps/epson_escpage-err.Tpo .deps/epson_escpage-err.Po [ 65s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpage-mem.o -MD -MP -MF .deps/epson_escpage-mem.Tpo -c -o epson_escpage-mem.o `test -f 'mem.c' || echo './'`mem.c [ 65s] mv -f .deps/epson_escpage-mem.Tpo .deps/epson_escpage-mem.Po [ 65s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -MT epson_escpage-linux_cmn.o -MD -MP -MF .deps/epson_escpage-linux_cmn.Tpo -c -o epson_escpage-linux_cmn.o `test -f 'linux_cmn.c' || echo './'`linux_cmn.c [ 66s] linux_cmn.c: In function 'epsmpGetLocalTime': [ 66s] linux_cmn.c:176:13: warning: variable 't' set but not used [-Wunused-but-set-variable] [ 66s] struct tm *t; [ 66s] ^ [ 66s] mv -f .deps/epson_escpage-linux_cmn.Tpo .deps/epson_escpage-linux_cmn.Po [ 66s] /bin/sh ../libtool --tag=CC --mode=link gcc -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o epson-escpage epson_escpage-filter.o epson_escpage-err.o epson_escpage-mem.o epson_escpage-linux_cmn.o ../lib/.libs/libescpage.a -lcupsimage -lcups [ 66s] libtool: link: gcc -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -fmessage-length=0 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -D__SOFTFP__ -g -o epson-escpage epson_escpage-filter.o epson_escpage-err.o epson_escpage-mem.o epson_escpage-linux_cmn.o ../lib/.libs/libescpage.a -lcupsimage -lcups [ 66s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 66s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 66s] rm -f debian/control debian/control.tmp; \ [ 66s] sed -e 's|[@]PACKAGE_BUGREPORT[@]|Seiko Epson Corporation |' \ [ 66s] -e 's|[@]PACKAGE_NAME[@]|Epson Laser Printer Driver (ESC/Page) for Linux|' \ [ 66s] -e 's|[@]PACKAGE_TARNAME[@]|epson-laser-printer-escpage|' \ [ 66s] './debian/control.in' > debian/control.tmp; \ [ 66s] mv debian/control.tmp debian/control [ 66s] rm -f debian/rules debian/rules.tmp; \ [ 66s] sed -e 's|[@]CUPS_FILTER_DIR[@]|/usr/lib/cups/filter|' \ [ 66s] -e 's|[@]CUPS_PPD_DIR[@]|/opt/etc/cups/ppd/Epson|' \ [ 66s] -e 's|[@]PACKAGE_TARNAME[@]|epson-laser-printer-escpage|' \ [ 66s] './debian/rules.in' > debian/rules.tmp; \ [ 66s] mv debian/rules.tmp debian/rules; \ [ 66s] chmod +x debian/rules [ 67s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 67s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 67s] + exit 0 [ 67s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.oeqQD8 [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd epson-laser-printer-escpage-1.0.1 [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 67s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 67s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 67s] + make install-strip DESTDIR=/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 67s] make INSTALL_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s" \ [ 67s] install_sh_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ [ 67s] `test -z 'strip' || \ [ 67s] echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install [ 67s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 67s] Making install in lib [ 67s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 67s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 67s] test -z "/usr/lib" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib" [ 67s] /bin/sh ../libtool --mode=install /usr/bin/install -c -s libescpage.la '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib' [ 67s] libtool: install: /usr/bin/install -c .libs/libescpage.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.so.1.0.1 [ 67s] libtool: install: strip --strip-unneeded /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.so.1.0.1 [ 67s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib && { ln -s -f libescpage.so.1.0.1 libescpage.so.1 || { rm -f libescpage.so.1 && ln -s libescpage.so.1.0.1 libescpage.so.1; }; }) [ 67s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib && { ln -s -f libescpage.so.1.0.1 libescpage.so || { rm -f libescpage.so && ln -s libescpage.so.1.0.1 libescpage.so; }; }) [ 67s] libtool: install: /usr/bin/install -c .libs/libescpage.lai /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.la [ 67s] libtool: install: /usr/bin/install -c .libs/libescpage.a /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.a [ 67s] libtool: install: strip --strip-debug /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.a [ 67s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.a [ 67s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/libescpage.a [ 67s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 67s] make[3]: Nothing to be done for `install-data-am'. [ 67s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 67s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 67s] Making install in ppd [ 67s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 67s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 67s] make[3]: Nothing to be done for `install-exec-am'. [ 67s] test -z "/opt/etc/cups/ppd/Epson" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/opt/etc/cups/ppd/Epson" [ 68s] /usr/bin/install -c -m 644 Epson-AL-M2010-epson-escpage-raster-en.ppd Epson-AL-M2310-epson-escpage-raster-en.ppd Epson-AL-M2300-epson-escpage-raster-en.ppd Epson-AL-C8600-epson-escpage-raster-en.ppd Epson-AL-C500-epson-escpage-raster-en.ppd Epson-AL-C4100-epson-escpage-raster-en.ppd Epson-AL-C9100-epson-escpage-raster-en.ppd Epson-LP-8800C-epson-escpage-raster-en.ppd Epson-LP-9000C-epson-escpage-raster-en.ppd Epson-LP-9200C-epson-escpage-raster-en.ppd Epson-LP-9800C-epson-escpage-raster-en.ppd Epson-LP-M5000-epson-escpage-raster-en.ppd Epson-LP-M5300-epson-escpage-raster-en.ppd Epson-LP-S6500-epson-escpage-raster-en.ppd Epson-LP-S7500-epson-escpage-raster-en.ppd Epson-LP-S8100-epson-escpage-raster-en.ppd Epson-LP-S9000-epson-escpage-raster-en.ppd Epson-EPL-N2500-epson-escpage-raster-en.ppd Epson-LP-2500-epson-escpage-raster-en.ppd Epson-LP-7900-epson-escpage-raster-en.ppd Epson-LP-8900-epson-escpage-raster-en.ppd Epson-LP-9000B-epson-escpage-raster-en.ppd Epson-LP-9100-epson-escpage-raster-en.ppd Epson-LP-9200B-epson-escpage-raster-en.ppd Epson-LP-9400-epson-escpage-raster-en.ppd Epson-LP-9600-epson-escpage-raster-en.ppd Epson-LP-9600S-epson-escpage-raster-en.ppd Epson-LP-S210-epson-escpage-raster-en.ppd Epson-LP-S300-epson-escpage-raster-en.ppd Epson-LP-S310-epson-escpage-raster-en.ppd Epson-LP-S3000-epson-escpage-raster-en.ppd Epson-LP-S3200-epson-escpage-raster-en.ppd Epson-LP-S3500-epson-escpage-raster-en.ppd Epson-LP-S4000-epson-escpage-raster-en.ppd Epson-LP-S4200-epson-escpage-raster-en.ppd Epson-LP-S4500-epson-escpage-raster-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/opt/etc/cups/ppd/Epson' [ 68s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 68s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 68s] Making install in src [ 68s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 68s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 68s] make[3]: Nothing to be done for `install-exec-am'. [ 68s] test -z "/usr/lib/cups/filter" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/cups/filter" [ 68s] STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s epson-escpage '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/cups/filter' [ 68s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s epson-escpage /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/lib/cups/filter/epson-escpage [ 68s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 68s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 68s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 68s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 68s] make[3]: Nothing to be done for `install-exec-am'. [ 68s] make[3]: Nothing to be done for `install-data-am'. [ 68s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 68s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 68s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 68s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/share/license [ 68s] + cp /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/COPYING /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm/usr/share/license/epson-laser-printer-escpage [ 68s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1 [ 68s] WARNING: /usr/lib/cups/filter/epson-escpage is already stripped! [ 68s] WARNING: /usr/lib/libescpage.so.1.0.1 is already stripped! [ 68s] + /usr/lib/rpm/brp-compress [ 68s] + /usr/lib/rpm/brp-tizen [ 68s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 68s] Processing files: epson-laser-printer-escpage-1.0.1-1.1.armv7l [ 68s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 68s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 68s] [ 69s] Provides: epson-laser-printer-escpage = 1.0.1-1.1 epson-laser-printer-escpage(armv7l-32) = 1.0.1-1.1 libescpage.so.1 [ 69s] Requires(interp): /bin/sh /bin/sh [ 69s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 69s] Requires(post): /bin/sh [ 69s] Requires(postun): /bin/sh [ 69s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcups.so.2 libcupsimage.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 69s] Processing files: epson-laser-printer-escpage-debugsource-1.0.1-1.1.armv7l [ 69s] Provides: epson-laser-printer-escpage-debugsource = 1.0.1-1.1 epson-laser-printer-escpage-debugsource(armv7l-32) = 1.0.1-1.1 [ 69s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 69s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 69s] warning: Could not canonicalize hostname: w24 [ 69s] Wrote: /home/abuild/rpmbuild/SRPMS/epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/epson-laser-printer-escpage-1.0.1-1.1.armv7l.rpm [ 69s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/epson-laser-printer-escpage-debugsource-1.0.1-1.1.armv7l.rpm [ 69s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.dPjEvf [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd epson-laser-printer-escpage-1.0.1 [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 69s] + make clean [ 69s] Making clean in src [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 69s] rm -f epson-escpage [ 69s] rm -rf .libs _libs [ 69s] rm -f *.o [ 69s] rm -f *.lo [ 69s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 69s] Making clean in ppd [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 69s] rm -rf .libs _libs [ 69s] rm -f *.lo [ 69s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 69s] Making clean in lib [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 69s] test -z "libescpage.la" || rm -f libescpage.la [ 69s] test -z "libescpage.la" || rm -f libescpage.la [ 69s] rm -f "./so_locations" [ 69s] rm -rf .libs _libs [ 69s] rm -f *.o [ 69s] rm -f *.lo [ 69s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 69s] Making clean in . [ 69s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 69s] rm -rf .libs _libs [ 69s] rm -f *.lo [ 69s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 69s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.arm [ 69s] + exit 0 [ 69s] ... checking for files with abuild user/group [ 70s] [ 70s] RPMLINT report: [ 70s] =============== [ 70s] qemu: Unsupported syscall: 311 [ 76s] epson-laser-printer-escpage.armv7l: W: script-without-shebang /usr/share/license/epson-laser-printer-escpage [ 76s] This text file has executable bits set or is located in a path dedicated for [ 76s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 76s] meant to be an executable script, add the shebang, otherwise remove the [ 76s] executable bits or move the file elsewhere. [ 76s] [ 76s] epson-laser-printer-escpage.armv7l: E: non-standard-group (Badness: 200) Applications/System [ 76s] epson-laser-printer-escpage.src: E: non-standard-group (Badness: 200) Applications/System [ 76s] The value of the Group tag in the package is not valid. Valid groups are [ 76s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 76s] [ 76s] epson-laser-printer-escpage.src:4: W: macro-in-comment %define [ 76s] epson-laser-printer-escpage.src:71: W: macro-in-comment %doc [ 76s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 76s] are expanded everywhere, so check if it can cause a problem in this case and [ 76s] escape the macro with another leading % if appropriate. [ 76s] [ 76s] epson-laser-printer-escpage.armv7l: E: invalid-license (Badness: 200) LGPL [ 76s] epson-laser-printer-escpage.src: E: invalid-license (Badness: 200) LGPL [ 76s] The specified license string is not recognized. Please refer to [ 76s] http://spdx.org/licenses/ for the list of known licences and their exact [ 76s] spelling. [ 76s] [ 76s] epson-laser-printer-escpage.src:16: W: hardcoded-packager-tag Seiko [ 76s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 76s] to use rebuilder's own defaults. [ 76s] [ 76s] 2 packages and 0 specfiles checked; 4 errors, 4 warnings. [ 76s] [ 76s] ... creating baselibs [ 76s] qemu: Unsupported syscall: 311 [ 77s] ... saving built statistics [ 77s] ... saving built packages [ 77s] /home/abuild/rpmbuild/RPMS/armv7l/epson-laser-printer-escpage-1.0.1-1.1.armv7l.rpm [ 77s] /home/abuild/rpmbuild/RPMS/armv7l/epson-laser-printer-escpage-debugsource-1.0.1-1.1.armv7l.rpm [ 77s] /home/abuild/rpmbuild/SRPMS/epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 77s] /home/abuild/rpmbuild/OTHER/_statistics [ 77s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 77s] [ 77s] w24 finished "build epson-laser-printer-escpage.spec" at Fri Jul 18 06:50:26 UTC 2014. [ 77s] [ 78s] Powering off. [ 78s] [ 69.909323] Power down. [ 78s] build: extracting built packages... [ 78s] epson-laser-printer-escpage-1.0.1-1.1.armv7l.rpm [ 78s] epson-laser-printer-escpage-debugsource-1.0.1-1.1.armv7l.rpm [ 78s] epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 78s] _statistics [ 78s] rpmlint.log