[ 0s] Using BUILD_ROOT=/srv/build/root_6/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_6/root [ 0s] [ 0s] [ 0s] w14 started "build _service:gbs:epson-laser-printer-escpage.spec" at Thu Jul 17 12:19:02 UTC 2014. [ 0s] [ 0s] Building epson-laser-printer-escpage for project 'Tizen:3.0.M14.2:IVI' repository 'atom' arch 'i586' srcmd5 '3a51d4e95984a4c60d7d0f2c40fa7b09' [ 0s] [ 0s] processing specfile /srv/build/root_6/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_6/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/6/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_6/.build.rpmlist /srv/build/root_6/.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 1s] [17/35] preinstalling libsmack... [ 1s] [18/35] preinstalling libsqlite... [ 1s] [19/35] preinstalling nspr... [ 1s] [20/35] preinstalling sed... [ 1s] [21/35] preinstalling tar... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling libacl... [ 1s] [24/35] preinstalling libgcc_s1... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling util-linux... [ 2s] [31/35] preinstalling coreutils... [ 2s] [32/35] preinstalling nss... [ 2s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_6/root,if=virtio,cache=none -drive file=/srv/build/root_6/root,if=ide,index=0,cache=none -drive file=/srv/build/root_6/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 5086/2392064 files, 186865/9568256 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] swapon /dev/vdb [ 8s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] mount: none is already mounted or /proc busy [ 8s] mount: none is already mounted or /dev/pts busy [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:epson-laser-printer-escpage.spec build rpmlint-Factory ... [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] [1/119] installing hwdata-0.260-3.1 [ 9s] [2/119] installing libmagic-data-5.11-9.1 [ 9s] [3/119] installing setup-0.9-3.7 [ 9s] [4/119] installing terminfo-base-5.9-5.1 [ 9s] [5/119] installing filesystem-3.1-5.1 [ 9s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 9s] [6/119] installing glibc-2.18-8.10 [ 9s] [7/119] installing bash-4.2-1.1 [ 9s] [8/119] installing cpio-2.11-1.1 [ 9s] [9/119] installing diffutils-3.3-1.1 [ 9s] [10/119] installing findutils-4.5.10-6.1 [ 9s] [11/119] installing gawk-4.0.1-4.4 [ 9s] [12/119] installing hostname-3.12-3.1 [ 9s] [13/119] installing libattr-2.4.46-1.1 [ 10s] [14/119] installing libbz2-1.0.6-1.2 [ 10s] [15/119] installing libcap-2.24-5.9 [ 10s] [16/119] installing libdbus-1.6.12-7.1 [ 10s] [17/119] installing libelf-0.155-1.1 [ 10s] [18/119] installing libexpat-2.1.0-6.1 [ 10s] [19/119] installing libext2fs-1.42.6-1.1 [ 10s] [20/119] installing libfreebl3-3.15.4-3.6 [ 10s] [21/119] installing libgdbm-1.10-6.3 [ 10s] [22/119] installing libgmp-5.1.3-4.1 [ 10s] [23/119] installing libgpg-error-1.10-3.1 [ 10s] [24/119] installing libjpeg-8.0.2-3.5 [ 10s] [25/119] installing libltdl-2.4.2-5.1 [ 10s] [26/119] installing liblua-5.1.4-4.2 [ 10s] [27/119] installing liblzma-5.0.3-5.11 [ 10s] [28/119] installing libpcre-8.31-3.1 [ 10s] [29/119] installing libpopt-1.16-5.1 [ 10s] [30/119] installing libsmack-1.0.3.1-5.1 [ 10s] [31/119] installing libsqlite-3.7.14-8.2 [ 10s] [32/119] installing libuuid-2.24-4.3 [ 10s] [33/119] installing m4-1.4.16-3.1 [ 10s] [34/119] installing net-tools-2.0_20121208git-5.1 [ 10s] [35/119] installing nspr-4.10.2-5.6 [ 10s] [36/119] installing patch-2.7-5.1 [ 10s] [37/119] installing pkg-config-0.28-5.1 [ 10s] [38/119] installing sed-4.2.1-3.1 [ 11s] [39/119] installing tar-1.27-3.1 [ 11s] [40/119] installing update-alternatives-1.16.3-3.1 [ 11s] [41/119] installing which-2.20-3.1 [ 11s] [42/119] installing zlib-1.2.7-5.1 [ 11s] [43/119] installing libncurses-5.9-5.1 [ 11s] [44/119] installing build-compare-2012.01.26-1.2 [ 11s] [45/119] installing libjpeg-devel-8.0.2-3.5 [ 11s] [46/119] installing grep-2.16-3.1 [ 11s] [47/119] installing less-458-3.1 [ 11s] [48/119] installing libacl-2.2.51-1.1 [ 11s] [49/119] installing libasm-0.155-1.1 [ 11s] [50/119] installing libatomic-4.8.2-7.1 [ 11s] [51/119] installing libblkid-2.24-4.3 [ 11s] [52/119] installing libgcc_s1-4.8.2-7.1 [ 11s] [53/119] installing libgcrypt-1.5.0-3.1 [ 11s] [54/119] installing libgomp-4.8.2-7.1 [ 11s] [55/119] installing libmpfr-3.1.1-5.1 [ 11s] [56/119] installing libopenssl-1.0.1h-5.1 [ 11s] [57/119] installing libpng-1.2.50-3.1 [ 11s] [58/119] installing libreadline-5.2-5.1 [ 11s] [59/119] installing make-3.82-3.1 [ 12s] [60/119] installing nss-certs-3.15.4-3.6 [ 12s] [61/119] installing smack-1.0.3.1-5.1 [ 12s] [62/119] installing bzip2-1.0.6-1.2 [ 12s] [63/119] installing libkmod-15-3.1 [ 12s] [64/119] installing libmagic-5.11-9.1 [ 12s] [65/119] installing libxml2-2.8.0-6.1 [ 12s] [66/119] installing xz-5.0.3-5.11 [ 12s] [67/119] installing binutils-2.23.1-1.1 [ 14s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 14s] [68/119] installing libdw-0.155-1.1 [ 14s] [69/119] installing file-5.11-9.1 [ 14s] [70/119] installing openssl-1.0.1h-5.1 [ 14s] [71/119] installing libitm-4.8.2-7.1 [ 14s] [72/119] installing libmount-2.24-4.3 [ 14s] [73/119] installing libmpc-1.0-3.1 [ 14s] [74/119] installing libstdc++-4.8.2-7.1 [ 14s] [75/119] installing db4-4.8.30.NC-1.1 [ 14s] [76/119] installing libasan-4.8.2-7.1 [ 14s] [77/119] installing cpp48-4.8.2-7.1 [ 15s] [78/119] installing cups-libs-1.6.4-1.1 [ 15s] [79/119] installing elfutils-0.155-1.1 [ 15s] [80/119] installing libtiff-4.0.2-3.1 [ 15s] [81/119] installing cpp-4.8-4.1 [ 15s] [82/119] installing perl-5.16.3-5.9 [ 24s] [83/119] installing build-mkbaselibs-20120927-1.2 [ 24s] [84/119] installing autoconf-2.69-1.1 [ 24s] [85/119] installing build-20120927-1.2 [ 24s] [86/119] installing pam-1.1.6-7.1 [ 24s] [87/119] installing nss-3.15.4-3.6 [ 24s] [88/119] installing pam-devel-1.1.6-7.1 [ 25s] [89/119] installing pwdutils-3.2.19-3.1 [ 25s] [90/119] installing libsoftokn3-3.15.4-3.6 [ 25s] [91/119] installing libsystemd-208-4.1 [ 25s] [92/119] installing coreutils-8.21-1.1 [ 25s] [93/119] installing util-linux-2.24-4.3 [ 25s] [94/119] installing rpm-4.11.0.1-11.2 [ 25s] [95/119] installing linux-glibc-devel-3.10-3.1 [ 27s] [96/119] installing glibc-locale-2.18-8.10 [ 28s] [97/119] installing gzip-1.6-5.1 [ 28s] [98/119] installing automake-1.12.1-1.1 [ 28s] [99/119] installing tzdata-2012e-3.1 [ 29s] [100/119] installing dbus-1.6.12-1.1 [ 29s] [101/119] installing rpmlint-mini-1.4-3.9 [ 29s] [102/119] installing rpm-security-plugin-4.11.0.1-11.2 [ 29s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 29s] [103/119] installing rpmlint-tizen-1.0-3.1 [ 29s] [104/119] installing glibc-devel-2.18-8.10 [ 30s] [105/119] installing libtool-2.4.2-5.1 [ 30s] [106/119] installing systemd-208-4.1 [ 31s] [107/119] installing libstdc++48-devel-4.8.2-7.1 [ 34s] [108/119] installing systemd-devel-208-4.1 [ 34s] [109/119] installing zlib-devel-1.2.7-5.1 [ 34s] [110/119] installing gcc48-4.8.2-7.1 [ 35s] [111/119] installing libstdc++-devel-4.8-4.1 [ 35s] [112/119] installing gcc-4.8-4.1 [ 35s] [113/119] installing libopenssl-devel-1.0.1h-5.1 [ 36s] [114/119] installing libpng-devel-1.2.50-3.1 [ 36s] [115/119] installing gcc48-c++-4.8.2-7.1 [ 37s] [116/119] installing gcc-c++-4.8-4.1 [ 37s] [117/119] installing libtiff-devel-4.0.2-3.1 [ 37s] [118/119] installing rpm-build-4.11.0.1-11.2 [ 37s] [119/119] installing cups-devel-1.6.4-1.1 [ 37s] removing nis flags from //etc/nsswitch.conf... [ 37s] now finalizing build dir... [ 39s] build target is i686-tizen-linux [ 39s] ----------------------------------------------------------------- [ 39s] I have the following modifications for epson-laser-printer-escpage.spec: [ 39s] 11c11 [ 39s] < Release: 8 [ 39s] --- [ 39s] > Release: 1.1 [ 39s] 77a78 [ 39s] > %changelog [ 39s] ----------------------------------------------------------------- [ 39s] ----- building epson-laser-printer-escpage.spec (user abuild) [ 39s] ----------------------------------------------------------------- [ 39s] ----------------------------------------------------------------- [ 39s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/atom/3a51d4e95984a4c60d7d0f2c40fa7b09-epson-laser-printer-escpage' /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage.spec [ 39s] Building target platforms: i686-tizen-linux [ 39s] Building for target i686-tizen-linux [ 39s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8a3zk8 [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + rm -rf epson-laser-printer-escpage-1.0.1 [ 39s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage-1.0.1.tar.gz [ 39s] + /bin/tar -xf - [ 39s] + STATUS=0 [ 39s] + '[' 0 -ne 0 ']' [ 39s] + cd epson-laser-printer-escpage-1.0.1 [ 39s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 39s] + cp /home/abuild/rpmbuild/SOURCES/epson-laser-printer-escpage.manifest . [ 39s] + echo 'Patch #0 (tizen_disable_unused_value.patch):' [ 39s] Patch #0 (tizen_disable_unused_value.patch): [ 39s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_disable_unused_value.patch [ 39s] + /bin/patch -p0 --fuzz=2 [ 39s] patching file lib/epson-escpr-api.c [ 39s] + echo 'Patch #1 (tizen_add_job_media_progress.patch):' [ 39s] Patch #1 (tizen_add_job_media_progress.patch): [ 39s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_add_job_media_progress.patch [ 39s] + /bin/patch -p1 --fuzz=2 [ 39s] patching file src/filter.c [ 39s] + echo 'Patch #2 (tizen_report_page_info.patch):' [ 39s] Patch #2 (tizen_report_page_info.patch): [ 39s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_report_page_info.patch [ 39s] + /bin/patch -p1 --fuzz=2 [ 39s] patching file src/filter.c [ 39s] + echo 'Patch #3 (tizen_fix_ignore_sigpipe.patch):' [ 39s] Patch #3 (tizen_fix_ignore_sigpipe.patch): [ 39s] + /bin/cat /home/abuild/rpmbuild/SOURCES/tizen_fix_ignore_sigpipe.patch [ 39s] + /bin/patch -p1 --fuzz=2 [ 39s] patching file src/filter.c [ 39s] + exit 0 [ 39s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.BsmNAh [ 39s] + umask 022 [ 39s] + cd /home/abuild/rpmbuild/BUILD [ 39s] + cd epson-laser-printer-escpage-1.0.1 [ 39s] + LANG=C [ 39s] + export LANG [ 39s] + unset DISPLAY [ 39s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CFLAGS [ 39s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CXXFLAGS [ 39s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 39s] + export FFLAGS [ 39s] + LD_AS_NEEDED=1 [ 39s] + export LD_AS_NEEDED [ 39s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CFLAGS [ 39s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 39s] + export CXXFLAGS [ 39s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 39s] + export FFLAGS [ 39s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-cupsfilterdir=/usr/lib/cups/filter --with-cupsppddir=/opt/etc/cups/ppd/Epson [ 39s] checking for a BSD-compatible install... /usr/bin/install -c [ 40s] checking whether build environment is sane... yes [ 40s] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p [ 40s] checking for gawk... gawk [ 40s] checking whether make sets $(MAKE)... yes [ 40s] checking for i686-tizen-linux-gnu-gcc... no [ 40s] checking for gcc... gcc [ 40s] checking whether the C compiler works... yes [ 40s] checking for C compiler default output file name... a.out [ 40s] checking for suffix of executables... [ 40s] checking whether we are cross compiling... no [ 40s] checking for suffix of object files... o [ 40s] checking whether we are using the GNU C compiler... yes [ 40s] checking whether gcc accepts -g... yes [ 40s] checking for gcc option to accept ISO C89... none needed [ 40s] checking for style of include used by make... GNU [ 40s] checking dependency style of gcc... gcc3 [ 40s] checking for an ANSI C-conforming const... yes [ 40s] checking how to run the C preprocessor... gcc -E [ 40s] checking whether ln -s works... yes [ 40s] checking build system type... i686-tizen-linux-gnu [ 40s] checking host system type... i686-tizen-linux-gnu [ 40s] checking for a sed that does not truncate output... /usr/bin/sed [ 40s] checking for grep that handles long lines and -e... /usr/bin/grep [ 40s] checking for egrep... /usr/bin/grep -E [ 40s] checking for fgrep... /usr/bin/grep -F [ 40s] checking for ld used by gcc... /usr/i586-tizen-linux/bin/ld [ 40s] checking if the linker (/usr/i586-tizen-linux/bin/ld) is GNU ld... yes [ 40s] checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B [ 40s] checking the name lister (/usr/bin/nm -B) interface... BSD nm [ 40s] checking the maximum length of command line arguments... 1572864 [ 40s] checking whether the shell understands some XSI constructs... yes [ 40s] checking whether the shell understands "+="... yes [ 40s] checking for /usr/i586-tizen-linux/bin/ld option to reload object files... -r [ 40s] checking for i686-tizen-linux-gnu-objdump... no [ 40s] checking for objdump... objdump [ 40s] checking how to recognize dependent libraries... pass_all [ 40s] checking for i686-tizen-linux-gnu-ar... no [ 40s] checking for ar... ar [ 40s] checking for i686-tizen-linux-gnu-strip... no [ 40s] checking for strip... strip [ 40s] checking for i686-tizen-linux-gnu-ranlib... no [ 40s] checking for ranlib... ranlib [ 40s] checking command to parse /usr/bin/nm -B output from gcc object... ok [ 40s] checking for ANSI C header files... yes [ 40s] checking for sys/types.h... yes [ 40s] checking for sys/stat.h... yes [ 40s] checking for stdlib.h... yes [ 41s] checking for string.h... yes [ 41s] checking for memory.h... yes [ 41s] checking for strings.h... yes [ 41s] checking for inttypes.h... yes [ 41s] checking for stdint.h... yes [ 41s] checking for unistd.h... yes [ 41s] checking for dlfcn.h... yes [ 41s] checking for objdir... .libs [ 41s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 41s] checking for gcc option to produce PIC... -fPIC -DPIC [ 41s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 41s] checking if gcc static flag -static works... no [ 41s] checking if gcc supports -c -o file.o... yes [ 41s] checking if gcc supports -c -o file.o... (cached) yes [ 41s] checking whether the gcc linker (/usr/i586-tizen-linux/bin/ld) supports shared libraries... yes [ 41s] checking whether -lc should be explicitly linked in... no [ 41s] checking dynamic linker characteristics... GNU/Linux ld.so [ 41s] checking how to hardcode library paths into programs... immediate [ 41s] checking whether stripping libraries is possible... yes [ 41s] checking if libtool supports shared libraries... yes [ 41s] checking whether to build shared libraries... yes [ 41s] checking whether to build static libraries... yes [ 41s] checking whether gcc and cc understand -c and -o together... yes [ 41s] checking for cups-config... yes [ 41s] checking for ANSI C header files... (cached) yes [ 41s] checking whether stat file-mode macros are broken... no [ 41s] checking whether time.h and sys/time.h may both be included... yes [ 41s] checking whether struct tm is in sys/time.h or time.h... time.h [ 41s] checking for pid_t... yes [ 41s] checking for size_t... yes [ 41s] checking cups/cups.h usability... yes [ 41s] checking cups/cups.h presence... yes [ 41s] checking for cups/cups.h... yes [ 41s] checking cups/ppd.h usability... yes [ 41s] checking cups/ppd.h presence... yes [ 41s] checking for cups/ppd.h... yes [ 41s] checking cups/raster.h usability... yes [ 41s] checking cups/raster.h presence... yes [ 41s] checking for cups/raster.h... yes [ 41s] checking ctype.h usability... yes [ 41s] checking ctype.h presence... yes [ 41s] checking for ctype.h... yes [ 41s] checking errno.h usability... yes [ 41s] checking errno.h presence... yes [ 41s] checking for errno.h... yes [ 41s] checking fcntl.h usability... yes [ 41s] checking fcntl.h presence... yes [ 41s] checking for fcntl.h... yes [ 42s] checking malloc.h usability... yes [ 42s] checking malloc.h presence... yes [ 42s] checking for malloc.h... yes [ 42s] checking signal.h usability... yes [ 42s] checking signal.h presence... yes [ 42s] checking for signal.h... yes [ 42s] checking stdarg.h usability... yes [ 42s] checking stdarg.h presence... yes [ 42s] checking for stdarg.h... yes [ 42s] checking stddef.h usability... yes [ 42s] checking stddef.h presence... yes [ 42s] checking for stddef.h... yes [ 42s] checking for stdlib.h... (cached) yes [ 42s] checking for string.h... (cached) yes [ 42s] checking for sys/stat.h... (cached) yes [ 42s] checking for sys/types.h... (cached) yes [ 42s] checking time.h usability... yes [ 42s] checking time.h presence... yes [ 42s] checking for time.h... yes [ 42s] checking for unistd.h... (cached) yes [ 42s] checking for ppdOpenFile in -lcups... yes [ 42s] checking for cupsRasterOpen in -lcupsimage... yes [ 42s] checking for stdlib.h... (cached) yes [ 42s] checking for GNU libc compatible malloc... yes [ 42s] checking for working memcmp... yes [ 42s] checking return type of signal handlers... void [ 42s] checking for memset... yes [ 42s] checking for strcspn... yes [ 42s] checking for strerror... yes [ 42s] checking for strrchr... yes [ 42s] configure: creating ./config.status [ 42s] config.status: creating Makefile [ 42s] config.status: creating lib/Makefile [ 42s] config.status: creating epson-laser-printer-escpage.spec [ 42s] config.status: creating ppd/Makefile [ 42s] config.status: creating src/Makefile [ 42s] config.status: creating config.h [ 42s] config.status: executing depfiles commands [ 42s] config.status: executing libtool commands [ 42s] + make [ 42s] make all-recursive [ 42s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 42s] Making all in lib [ 42s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 42s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c -o libescpage_la-epson-cbt.lo `test -f 'epson-cbt.c' || echo './'`epson-cbt.c [ 42s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c epson-cbt.c -fPIC -DPIC -o .libs/libescpage_la-epson-cbt.o [ 42s] epson-cbt.c: In function 'commClose': [ 42s] epson-cbt.c:654:15: warning: variable 'closePtlState' set but not used [-Wunused-but-set-variable] [ 42s] EPS_INT32 closePtlState = 0; [ 42s] ^ [ 43s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-cbt.lo -MD -MP -MF .deps/libescpage_la-epson-cbt.Tpo -c epson-cbt.c -o libescpage_la-epson-cbt.o >/dev/null 2>&1 [ 43s] mv -f .deps/libescpage_la-epson-cbt.Tpo .deps/libescpage_la-epson-cbt.Plo [ 43s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c -o libescpage_la-epson-escpage.lo `test -f 'epson-escpage.c' || echo './'`epson-escpage.c [ 43s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c epson-escpage.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage.o [ 43s] epson-escpage.c: In function 'pageInitJob': [ 43s] epson-escpage.c:205:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 43s] debug_msg("__ Number = %d __\n", dim(pagePaperSource) ); [ 43s] ^ [ 43s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage.lo -MD -MP -MF .deps/libescpage_la-epson-escpage.Tpo -c epson-escpage.c -o libescpage_la-epson-escpage.o >/dev/null 2>&1 [ 43s] mv -f .deps/libescpage_la-epson-escpage.Tpo .deps/libescpage_la-epson-escpage.Plo [ 43s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c -o libescpage_la-epson-escpage-color.lo `test -f 'epson-escpage-color.c' || echo './'`epson-escpage-color.c [ 43s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c epson-escpage-color.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-color.o [ 43s] epson-escpage-color.c: In function 'pageStartJob_C': [ 43s] epson-escpage-color.c:307:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 43s] debug_msg("__ debug 0 __\n"); [ 43s] ^ [ 44s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-color.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-color.Tpo -c epson-escpage-color.c -o libescpage_la-epson-escpage-color.o >/dev/null 2>&1 [ 44s] mv -f .deps/libescpage_la-epson-escpage-color.Tpo .deps/libescpage_la-epson-escpage-color.Plo [ 44s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c -o libescpage_la-epson-escpage-comp.lo `test -f 'epson-escpage-comp.c' || echo './'`epson-escpage-comp.c [ 44s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-comp.o [ 44s] epson-escpage-comp.c:95:6: warning: missing braces around initializer [-Wmissing-braces] [ 44s] = { 0x00, 2, 0x02, 2, 0x01, 2, 0x03, 4, 0x0b, 4, [ 44s] ^ [ 44s] epson-escpage-comp.c:95:6: warning: (near initialization for 'HufmanDefTable3[0]') [-Wmissing-braces] [ 44s] epson-escpage-comp.c: In function 'CompressBitImage': [ 44s] epson-escpage-comp.c:159:2: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 44s] debug_msg("dwwkBufferSize = %d\n", dwwkBufferSize); [ 44s] ^ [ 44s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-comp.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-comp.Tpo -c epson-escpage-comp.c -o libescpage_la-epson-escpage-comp.o >/dev/null 2>&1 [ 44s] mv -f .deps/libescpage_la-epson-escpage-comp.Tpo .deps/libescpage_la-epson-escpage-comp.Plo [ 44s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c -o libescpage_la-epson-escpage-mono.lo `test -f 'epson-escpage-mono.c' || echo './'`epson-escpage-mono.c [ 44s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpage-mono.o [ 44s] epson-escpage-mono.c: In function 'pageStartJob_M': [ 44s] epson-escpage-mono.c:421:2: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 44s] debug_msg("start Job MONO\n"); [ 44s] ^ [ 44s] epson-escpage-mono.c: In function 'BandInit': [ 44s] epson-escpage-mono.c:1143:25: warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess] [ 44s] memset(pBand, 0, sizeof(pBand)); [ 44s] ^ [ 45s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpage-mono.lo -MD -MP -MF .deps/libescpage_la-epson-escpage-mono.Tpo -c epson-escpage-mono.c -o libescpage_la-epson-escpage-mono.o >/dev/null 2>&1 [ 45s] mv -f .deps/libescpage_la-epson-escpage-mono.Tpo .deps/libescpage_la-epson-escpage-mono.Plo [ 45s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c -o libescpage_la-epson-escpr-api.lo `test -f 'epson-escpr-api.c' || echo './'`epson-escpr-api.c [ 45s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c epson-escpr-api.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-api.o [ 45s] epson-escpr-api.c: In function 'SetupJobAttrib': [ 45s] epson-escpr-api.c:3410:3: warning: implicit declaration of function 'debug_msg' [-Wimplicit-function-declaration] [ 45s] debug_msg("ccheck call function start Job \n"); [ 45s] ^ [ 46s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-api.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-api.Tpo -c epson-escpr-api.c -o libescpage_la-epson-escpr-api.o >/dev/null 2>&1 [ 46s] mv -f .deps/libescpage_la-epson-escpr-api.Tpo .deps/libescpage_la-epson-escpr-api.Plo [ 46s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c -o libescpage_la-epson-escpr-dbg.lo `test -f 'epson-escpr-dbg.c' || echo './'`epson-escpr-dbg.c [ 46s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-dbg.o [ 46s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-dbg.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-dbg.Tpo -c epson-escpr-dbg.c -o libescpage_la-epson-escpr-dbg.o >/dev/null 2>&1 [ 46s] mv -f .deps/libescpage_la-epson-escpr-dbg.Tpo .deps/libescpage_la-epson-escpr-dbg.Plo [ 46s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c -o libescpage_la-epson-escpr-mem.lo `test -f 'epson-escpr-mem.c' || echo './'`epson-escpr-mem.c [ 46s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-mem.o [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-mem.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-mem.Tpo -c epson-escpr-mem.c -o libescpage_la-epson-escpr-mem.o >/dev/null 2>&1 [ 47s] mv -f .deps/libescpage_la-epson-escpr-mem.Tpo .deps/libescpage_la-epson-escpr-mem.Plo [ 47s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c -o libescpage_la-epson-escpr-services.lo `test -f 'epson-escpr-services.c' || echo './'`epson-escpr-services.c [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c epson-escpr-services.c -fPIC -DPIC -o .libs/libescpage_la-epson-escpr-services.o [ 47s] epson-escpr-services.c: In function 'serParseDeviceID': [ 47s] epson-escpr-services.c:341:10: warning: 'k' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 47s] if(k)*k = ','; [ 47s] ^ [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-escpr-services.lo -MD -MP -MF .deps/libescpage_la-epson-escpr-services.Tpo -c epson-escpr-services.c -o libescpage_la-epson-escpr-services.o >/dev/null 2>&1 [ 47s] mv -f .deps/libescpage_la-epson-escpr-services.Tpo .deps/libescpage_la-epson-escpr-services.Plo [ 47s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c -o libescpage_la-epson-layout.lo `test -f 'epson-layout.c' || echo './'`epson-layout.c [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c epson-layout.c -fPIC -DPIC -o .libs/libescpage_la-epson-layout.o [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-layout.lo -MD -MP -MF .deps/libescpage_la-epson-layout.Tpo -c epson-layout.c -o libescpage_la-epson-layout.o >/dev/null 2>&1 [ 47s] mv -f .deps/libescpage_la-epson-layout.Tpo .deps/libescpage_la-epson-layout.Plo [ 47s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c -o libescpage_la-epson-net-lpr.lo `test -f 'epson-net-lpr.c' || echo './'`epson-net-lpr.c [ 47s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c epson-net-lpr.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-lpr.o [ 48s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-lpr.lo -MD -MP -MF .deps/libescpage_la-epson-net-lpr.Tpo -c epson-net-lpr.c -o libescpage_la-epson-net-lpr.o >/dev/null 2>&1 [ 48s] mv -f .deps/libescpage_la-epson-net-lpr.Tpo .deps/libescpage_la-epson-net-lpr.Plo [ 48s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c -o libescpage_la-epson-net-raw.lo `test -f 'epson-net-raw.c' || echo './'`epson-net-raw.c [ 48s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c epson-net-raw.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-raw.o [ 48s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-raw.lo -MD -MP -MF .deps/libescpage_la-epson-net-raw.Tpo -c epson-net-raw.c -o libescpage_la-epson-net-raw.o >/dev/null 2>&1 [ 48s] mv -f .deps/libescpage_la-epson-net-raw.Tpo .deps/libescpage_la-epson-net-raw.Plo [ 48s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c -o libescpage_la-epson-net-snmp.lo `test -f 'epson-net-snmp.c' || echo './'`epson-net-snmp.c [ 48s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c epson-net-snmp.c -fPIC -DPIC -o .libs/libescpage_la-epson-net-snmp.o [ 48s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-net-snmp.lo -MD -MP -MF .deps/libescpage_la-epson-net-snmp.Tpo -c epson-net-snmp.c -o libescpage_la-epson-net-snmp.o >/dev/null 2>&1 [ 49s] mv -f .deps/libescpage_la-epson-net-snmp.Tpo .deps/libescpage_la-epson-net-snmp.Plo [ 49s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c -o libescpage_la-epson-protocol.lo `test -f 'epson-protocol.c' || echo './'`epson-protocol.c [ 49s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c epson-protocol.c -fPIC -DPIC -o .libs/libescpage_la-epson-protocol.o [ 49s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-protocol.lo -MD -MP -MF .deps/libescpage_la-epson-protocol.Tpo -c epson-protocol.c -o libescpage_la-epson-protocol.o >/dev/null 2>&1 [ 49s] mv -f .deps/libescpage_la-epson-protocol.Tpo .deps/libescpage_la-epson-protocol.Plo [ 49s] /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c -o libescpage_la-epson-usb.lo `test -f 'epson-usb.c' || echo './'`epson-usb.c [ 49s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c epson-usb.c -fPIC -DPIC -o .libs/libescpage_la-epson-usb.o [ 49s] epson-usb.c: In function 'usbResetPrinter': [ 49s] epson-usb.c:670:21: warning: variable 'retBufSize' set but not used [-Wunused-but-set-variable] [ 49s] EPS_INT32 retBufSize; /* Size of buffer written */ [ 49s] ^ [ 50s] libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT libescpage_la-epson-usb.lo -MD -MP -MF .deps/libescpage_la-epson-usb.Tpo -c epson-usb.c -o libescpage_la-epson-usb.o >/dev/null 2>&1 [ 50s] mv -f .deps/libescpage_la-epson-usb.Tpo .deps/libescpage_la-epson-usb.Plo [ 50s] /bin/sh ../libtool --tag=CC --mode=link gcc -Wall -DGCOMSW_PRT_USE_USB -DGCOMSW_PRT_USE_LPR -DGCOMSW_PRT_USE_RAW -DGCOMSW_CMD_ESCPAGE -DGCOMSW_EL_CDLABEL -DGCOMSW_EF_MAINTE -DGCOMSW_CMD_ESCPAGE -DEPS_FILTER -DGCOMSW_ASYNCJOB_SUPPORT -DGCOMSW_RAWFILE_SUPPORT -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -O2 -version-info 1:1:0 -o libescpage.la -rpath /usr/lib libescpage_la-epson-cbt.lo libescpage_la-epson-escpage.lo libescpage_la-epson-escpage-color.lo libescpage_la-epson-escpage-comp.lo libescpage_la-epson-escpage-mono.lo libescpage_la-epson-escpr-api.lo libescpage_la-epson-escpr-dbg.lo libescpage_la-epson-escpr-mem.lo libescpage_la-epson-escpr-services.lo libescpage_la-epson-layout.lo libescpage_la-epson-net-lpr.lo libescpage_la-epson-net-raw.lo libescpage_la-epson-net-snmp.lo libescpage_la-epson-protocol.lo libescpage_la-epson-usb.lo -lcupsimage -lcups [ 50s] libtool: link: gcc -shared .libs/libescpage_la-epson-cbt.o .libs/libescpage_la-epson-escpage.o .libs/libescpage_la-epson-escpage-color.o .libs/libescpage_la-epson-escpage-comp.o .libs/libescpage_la-epson-escpage-mono.o .libs/libescpage_la-epson-escpr-api.o .libs/libescpage_la-epson-escpr-dbg.o .libs/libescpage_la-epson-escpr-mem.o .libs/libescpage_la-epson-escpr-services.o .libs/libescpage_la-epson-layout.o .libs/libescpage_la-epson-net-lpr.o .libs/libescpage_la-epson-net-raw.o .libs/libescpage_la-epson-net-snmp.o .libs/libescpage_la-epson-protocol.o .libs/libescpage_la-epson-usb.o -lcupsimage -lcups -m32 -march=i686 -mtune=i686 -Wl,-soname -Wl,libescpage.so.1 -o .libs/libescpage.so.1.0.1 [ 50s] libtool: link: (cd ".libs" && rm -f "libescpage.so.1" && ln -s "libescpage.so.1.0.1" "libescpage.so.1") [ 50s] libtool: link: (cd ".libs" && rm -f "libescpage.so" && ln -s "libescpage.so.1.0.1" "libescpage.so") [ 50s] libtool: link: ar cru .libs/libescpage.a libescpage_la-epson-cbt.o libescpage_la-epson-escpage.o libescpage_la-epson-escpage-color.o libescpage_la-epson-escpage-comp.o libescpage_la-epson-escpage-mono.o libescpage_la-epson-escpr-api.o libescpage_la-epson-escpr-dbg.o libescpage_la-epson-escpr-mem.o libescpage_la-epson-escpr-services.o libescpage_la-epson-layout.o libescpage_la-epson-net-lpr.o libescpage_la-epson-net-raw.o libescpage_la-epson-net-snmp.o libescpage_la-epson-protocol.o libescpage_la-epson-usb.o [ 50s] libtool: link: ranlib .libs/libescpage.a [ 50s] libtool: link: ( cd ".libs" && rm -f "libescpage.la" && ln -s "../libescpage.la" "libescpage.la" ) [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] Making all in ppd [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] make[2]: Nothing to be done for `all'. [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] Making all in src [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpage-filter.o -MD -MP -MF .deps/epson_escpage-filter.Tpo -c -o epson_escpage-filter.o `test -f 'filter.c' || echo './'`filter.c [ 50s] filter.c: In function 'getOptionForJob': [ 50s] filter.c:370:3: warning: passing argument 1 of 'epsGetInputOption' from incompatible pointer type [enabled by default] [ 50s] error = epsGetInputOption (argv, argc, key, opt_t); [ 50s] ^ [ 50s] filter.c:266:5: note: expected 'char **' but argument is of type 'const char **' [ 50s] int epsGetInputOption(char** in_argv,int in_argc, char *opt, char *dest) [ 50s] ^ [ 50s] filter.c: In function 'main': [ 50s] filter.c:651:3: warning: passing argument 1 of 'setupOptionforJob' from incompatible pointer type [enabled by default] [ 50s] resul = setupOptionforJob(argv, argc, &fopt, argv[0]); [ 50s] ^ [ 50s] filter.c:386:12: note: expected 'const char **' but argument is of type 'char **' [ 50s] static int setupOptionforJob(const char** argv, const int argc, EPS_JOB_ATTRIB *jobAttr, const char *printer) [ 50s] ^ [ 50s] filter.c: In function 'do_printJob': [ 50s] filter.c:742:3: warning: 'cupsRasterReadHeader' is deprecated (declared at /usr/include/cups/raster.h:370) [-Wdeprecated-declarations] [ 50s] while (cupsRasterReadHeader (ras, &header) > 0 && !cancel_flg) [ 50s] ^ [ 50s] mv -f .deps/epson_escpage-filter.Tpo .deps/epson_escpage-filter.Po [ 50s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpage-err.o -MD -MP -MF .deps/epson_escpage-err.Tpo -c -o epson_escpage-err.o `test -f 'err.c' || echo './'`err.c [ 50s] err.c: In function 'debugt_msg': [ 50s] err.c:106:2: warning: 'return' with a value, in function returning void [enabled by default] [ 50s] return 0; [ 50s] ^ [ 50s] mv -f .deps/epson_escpage-err.Tpo .deps/epson_escpage-err.Po [ 50s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpage-mem.o -MD -MP -MF .deps/epson_escpage-mem.Tpo -c -o epson_escpage-mem.o `test -f 'mem.c' || echo './'`mem.c [ 50s] mv -f .deps/epson_escpage-mem.Tpo .deps/epson_escpage-mem.Po [ 50s] gcc -DHAVE_CONFIG_H -I. -I.. -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -MT epson_escpage-linux_cmn.o -MD -MP -MF .deps/epson_escpage-linux_cmn.Tpo -c -o epson_escpage-linux_cmn.o `test -f 'linux_cmn.c' || echo './'`linux_cmn.c [ 50s] mv -f .deps/epson_escpage-linux_cmn.Tpo .deps/epson_escpage-linux_cmn.Po [ 50s] /bin/sh ../libtool --tag=CC --mode=link gcc -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o epson-escpage epson_escpage-filter.o epson_escpage-err.o epson_escpage-mem.o epson_escpage-linux_cmn.o ../lib/.libs/libescpage.a -lcupsimage -lcups [ 50s] libtool: link: gcc -I../escpr-lib -I../escpr-lib/inc -I../lib -DEPS_FILTER -DGCOMSW_CMD_ESCPAGE -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -o epson-escpage epson_escpage-filter.o epson_escpage-err.o epson_escpage-mem.o epson_escpage-linux_cmn.o ../lib/.libs/libescpage.a -lcupsimage -lcups [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] rm -f debian/control debian/control.tmp; \ [ 50s] sed -e 's|[@]PACKAGE_BUGREPORT[@]|Seiko Epson Corporation |' \ [ 50s] -e 's|[@]PACKAGE_NAME[@]|Epson Laser Printer Driver (ESC/Page) for Linux|' \ [ 50s] -e 's|[@]PACKAGE_TARNAME[@]|epson-laser-printer-escpage|' \ [ 50s] './debian/control.in' > debian/control.tmp; \ [ 50s] mv debian/control.tmp debian/control [ 50s] rm -f debian/rules debian/rules.tmp; \ [ 50s] sed -e 's|[@]CUPS_FILTER_DIR[@]|/usr/lib/cups/filter|' \ [ 50s] -e 's|[@]CUPS_PPD_DIR[@]|/opt/etc/cups/ppd/Epson|' \ [ 50s] -e 's|[@]PACKAGE_TARNAME[@]|epson-laser-printer-escpage|' \ [ 50s] './debian/rules.in' > debian/rules.tmp; \ [ 50s] mv debian/rules.tmp debian/rules; \ [ 50s] chmod +x debian/rules [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] + exit 0 [ 50s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.fcQPu8 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd epson-laser-printer-escpage-1.0.1 [ 50s] + LANG=C [ 50s] + export LANG [ 50s] + unset DISPLAY [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 50s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 50s] + make install-strip DESTDIR=/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 50s] make INSTALL_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s" \ [ 50s] install_sh_PROGRAM="/bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s" INSTALL_STRIP_FLAG=-s \ [ 50s] `test -z 'strip' || \ [ 50s] echo "INSTALL_PROGRAM_ENV=STRIPPROG='strip'"` install [ 50s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] Making install in lib [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] test -z "/usr/lib" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib" [ 50s] /bin/sh ../libtool --mode=install /usr/bin/install -c -s libescpage.la '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib' [ 50s] libtool: install: /usr/bin/install -c .libs/libescpage.so.1.0.1 /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.so.1.0.1 [ 50s] libtool: install: strip --strip-unneeded /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.so.1.0.1 [ 50s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib && { ln -s -f libescpage.so.1.0.1 libescpage.so.1 || { rm -f libescpage.so.1 && ln -s libescpage.so.1.0.1 libescpage.so.1; }; }) [ 50s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib && { ln -s -f libescpage.so.1.0.1 libescpage.so || { rm -f libescpage.so && ln -s libescpage.so.1.0.1 libescpage.so; }; }) [ 50s] libtool: install: /usr/bin/install -c .libs/libescpage.lai /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.la [ 50s] libtool: install: /usr/bin/install -c .libs/libescpage.a /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.a [ 50s] libtool: install: strip --strip-debug /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.a [ 50s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.a [ 50s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/libescpage.a [ 50s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 50s] make[3]: Nothing to be done for `install-data-am'. [ 50s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 50s] Making install in ppd [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] make[3]: Nothing to be done for `install-exec-am'. [ 50s] test -z "/opt/etc/cups/ppd/Epson" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/opt/etc/cups/ppd/Epson" [ 50s] /usr/bin/install -c -m 644 Epson-AL-M2010-epson-escpage-raster-en.ppd Epson-AL-M2310-epson-escpage-raster-en.ppd Epson-AL-M2300-epson-escpage-raster-en.ppd Epson-AL-C8600-epson-escpage-raster-en.ppd Epson-AL-C500-epson-escpage-raster-en.ppd Epson-AL-C4100-epson-escpage-raster-en.ppd Epson-AL-C9100-epson-escpage-raster-en.ppd Epson-LP-8800C-epson-escpage-raster-en.ppd Epson-LP-9000C-epson-escpage-raster-en.ppd Epson-LP-9200C-epson-escpage-raster-en.ppd Epson-LP-9800C-epson-escpage-raster-en.ppd Epson-LP-M5000-epson-escpage-raster-en.ppd Epson-LP-M5300-epson-escpage-raster-en.ppd Epson-LP-S6500-epson-escpage-raster-en.ppd Epson-LP-S7500-epson-escpage-raster-en.ppd Epson-LP-S8100-epson-escpage-raster-en.ppd Epson-LP-S9000-epson-escpage-raster-en.ppd Epson-EPL-N2500-epson-escpage-raster-en.ppd Epson-LP-2500-epson-escpage-raster-en.ppd Epson-LP-7900-epson-escpage-raster-en.ppd Epson-LP-8900-epson-escpage-raster-en.ppd Epson-LP-9000B-epson-escpage-raster-en.ppd Epson-LP-9100-epson-escpage-raster-en.ppd Epson-LP-9200B-epson-escpage-raster-en.ppd Epson-LP-9400-epson-escpage-raster-en.ppd Epson-LP-9600-epson-escpage-raster-en.ppd Epson-LP-9600S-epson-escpage-raster-en.ppd Epson-LP-S210-epson-escpage-raster-en.ppd Epson-LP-S300-epson-escpage-raster-en.ppd Epson-LP-S310-epson-escpage-raster-en.ppd Epson-LP-S3000-epson-escpage-raster-en.ppd Epson-LP-S3200-epson-escpage-raster-en.ppd Epson-LP-S3500-epson-escpage-raster-en.ppd Epson-LP-S4000-epson-escpage-raster-en.ppd Epson-LP-S4200-epson-escpage-raster-en.ppd Epson-LP-S4500-epson-escpage-raster-en.ppd '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/opt/etc/cups/ppd/Epson' [ 50s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 50s] Making install in src [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] make[3]: Nothing to be done for `install-exec-am'. [ 50s] test -z "/usr/lib/cups/filter" || /usr/bin/mkdir -p "/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/cups/filter" [ 50s] STRIPPROG='strip' /bin/sh ../libtool --mode=install /bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s epson-escpage '/home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/cups/filter' [ 50s] libtool: install: /bin/sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/install-sh -c -s epson-escpage /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/lib/cups/filter/epson-escpage [ 50s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 50s] make[2]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] make[3]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] make[3]: Nothing to be done for `install-exec-am'. [ 50s] make[3]: Nothing to be done for `install-data-am'. [ 50s] make[3]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] make[2]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 50s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/share/license [ 50s] + cp /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/COPYING /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386/usr/share/license/epson-laser-printer-escpage [ 50s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1 [ 50s] WARNING: /usr/lib/cups/filter/epson-escpage is already stripped! [ 50s] WARNING: /usr/lib/libescpage.so.1.0.1 is already stripped! [ 50s] + /usr/lib/rpm/brp-compress [ 50s] + /usr/lib/rpm/brp-tizen [ 50s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 50s] Processing files: epson-laser-printer-escpage-1.0.1-1.1.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 51s] Provides: epson-laser-printer-escpage = 1.0.1-1.1 epson-laser-printer-escpage(x86-32) = 1.0.1-1.1 libescpage.so.1 [ 51s] Requires(interp): /bin/sh /bin/sh [ 51s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 51s] Requires(post): /bin/sh [ 51s] Requires(postun): /bin/sh [ 51s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcups.so.2 libcupsimage.so.2 [ 51s] Processing files: epson-laser-printer-escpage-debugsource-1.0.1-1.1.i686 [ 51s] Provides: epson-laser-printer-escpage-debugsource = 1.0.1-1.1 epson-laser-printer-escpage-debugsource(x86-32) = 1.0.1-1.1 [ 51s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 51s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 51s] Wrote: /home/abuild/rpmbuild/SRPMS/epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 51s] Wrote: /home/abuild/rpmbuild/RPMS/i686/epson-laser-printer-escpage-1.0.1-1.1.i686.rpm [ 51s] Wrote: /home/abuild/rpmbuild/RPMS/i686/epson-laser-printer-escpage-debugsource-1.0.1-1.1.i686.rpm [ 51s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QZIRJB [ 51s] + umask 022 [ 51s] + cd /home/abuild/rpmbuild/BUILD [ 51s] + cd epson-laser-printer-escpage-1.0.1 [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 51s] + make clean [ 51s] Making clean in src [ 51s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 51s] rm -f epson-escpage [ 51s] rm -rf .libs _libs [ 51s] rm -f *.o [ 51s] rm -f *.lo [ 51s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/src' [ 51s] Making clean in ppd [ 51s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 51s] rm -rf .libs _libs [ 51s] rm -f *.lo [ 51s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/ppd' [ 51s] Making clean in lib [ 51s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 51s] test -z "libescpage.la" || rm -f libescpage.la [ 51s] test -z "libescpage.la" || rm -f libescpage.la [ 51s] rm -f "./so_locations" [ 51s] rm -rf .libs _libs [ 51s] rm -f *.o [ 51s] rm -f *.lo [ 51s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1/lib' [ 51s] Making clean in . [ 51s] make[1]: Entering directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 51s] rm -rf .libs _libs [ 51s] rm -f *.lo [ 51s] make[1]: Leaving directory `/home/abuild/rpmbuild/BUILD/epson-laser-printer-escpage-1.0.1' [ 51s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/epson-laser-printer-escpage-1.0.1-1.1.i386 [ 51s] + exit 0 [ 51s] ... checking for files with abuild user/group [ 51s] [ 51s] RPMLINT report: [ 51s] =============== [ 51s] epson-laser-printer-escpage.i686: W: script-without-shebang /usr/share/license/epson-laser-printer-escpage [ 51s] This text file has executable bits set or is located in a path dedicated for [ 51s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 51s] meant to be an executable script, add the shebang, otherwise remove the [ 51s] executable bits or move the file elsewhere. [ 51s] [ 51s] epson-laser-printer-escpage.i686: E: non-standard-group (Badness: 200) Applications/System [ 51s] epson-laser-printer-escpage.src: E: non-standard-group (Badness: 200) Applications/System [ 51s] The value of the Group tag in the package is not valid. Valid groups are [ 51s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 51s] [ 51s] epson-laser-printer-escpage.src:4: W: macro-in-comment %define [ 51s] epson-laser-printer-escpage.src:71: W: macro-in-comment %doc [ 51s] There is a unescaped macro after a shell style comment in the specfile. Macros [ 51s] are expanded everywhere, so check if it can cause a problem in this case and [ 51s] escape the macro with another leading % if appropriate. [ 51s] [ 51s] epson-laser-printer-escpage.i686: E: invalid-license (Badness: 200) LGPL [ 51s] epson-laser-printer-escpage.src: E: invalid-license (Badness: 200) LGPL [ 51s] The specified license string is not recognized. Please refer to [ 51s] http://spdx.org/licenses/ for the list of known licences and their exact [ 51s] spelling. [ 51s] [ 51s] epson-laser-printer-escpage.src:16: W: hardcoded-packager-tag Seiko [ 51s] The Packager tag is hardcoded in your spec file. It should be removed, so as [ 51s] to use rebuilder's own defaults. [ 51s] [ 51s] 2 packages and 0 specfiles checked; 4 errors, 4 warnings. [ 51s] [ 51s] ... creating baselibs [ 51s] ... saving built statistics [ 51s] ... saving built packages [ 51s] /home/abuild/rpmbuild/RPMS/i686/epson-laser-printer-escpage-1.0.1-1.1.i686.rpm [ 51s] /home/abuild/rpmbuild/RPMS/i686/epson-laser-printer-escpage-debugsource-1.0.1-1.1.i686.rpm [ 51s] /home/abuild/rpmbuild/SRPMS/epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 51s] /home/abuild/rpmbuild/OTHER/_statistics [ 51s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 52s] [ 52s] w14 finished "build epson-laser-printer-escpage.spec" at Thu Jul 17 12:19:53 UTC 2014. [ 52s] [ 53s] Powering off. [ 53s] [ 46.784366] Power down. [ 53s] build: extracting built packages... [ 53s] epson-laser-printer-escpage-1.0.1-1.1.i686.rpm [ 53s] epson-laser-printer-escpage-debugsource-1.0.1-1.1.i686.rpm [ 53s] epson-laser-printer-escpage-1.0.1-1.1.src.rpm [ 53s] _statistics [ 53s] rpmlint.log Retried build at Thu Jul 17 08:48:34 2014 returned same result, skipped Retried build at Thu Jul 17 21:22:45 2014 returned same result, skipped