[ 0s] Using BUILD_ROOT=/srv/build/root_7/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_7/root [ 0s] [ 0s] [ 0s] w04 started "build _service:gbs:dracut.spec" at Fri Jul 18 04:24:36 UTC 2014. [ 0s] [ 0s] Building dracut for project 'Tizen:3.0.M14.2:IVI' repository 'emulator' arch 'i586' srcmd5 '53ca5b232721bf6259ff30f3a7073f2e' [ 0s] [ 0s] processing specfile /srv/build/root_7/.build-srcdir/_service:gbs:dracut.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_7/.build-srcdir/_service:gbs:dracut.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/7/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_7/.build.rpmlist /srv/build/root_7/.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/35] preinstalling libmagic-data... [ 1s] [2/35] preinstalling setup... [ 1s] [3/35] preinstalling filesystem... [ 1s] [4/35] preinstalling glibc... [ 1s] [5/35] preinstalling bash... [ 1s] [6/35] preinstalling diffutils... [ 1s] [7/35] preinstalling grep... [ 1s] [8/35] preinstalling libattr... [ 1s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling liblua... [ 1s] [14/35] preinstalling liblzma... [ 1s] [15/35] preinstalling libncurses... [ 1s] [16/35] preinstalling libpopt... [ 1s] [17/35] preinstalling libsmack... [ 1s] [18/35] preinstalling libsqlite... [ 1s] [19/35] preinstalling nspr... [ 1s] [20/35] preinstalling sed... [ 1s] [21/35] preinstalling tar... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling libacl... [ 2s] [24/35] preinstalling libgcc_s1... [ 2s] [25/35] preinstalling libreadline... [ 2s] [26/35] preinstalling smack... [ 2s] [27/35] preinstalling bzip2... [ 2s] [28/35] preinstalling libmagic... [ 2s] [29/35] preinstalling libxml2... [ 2s] [30/35] preinstalling util-linux... [ 2s] [31/35] preinstalling coreutils... [ 2s] [32/35] preinstalling nss... [ 2s] [33/35] preinstalling libsoftokn3... [ 2s] [34/35] preinstalling rpm... [ 2s] [35/35] preinstalling rpm-security-plugin... [ 2s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 3s] [5/8] preinstalling grep... [ 3s] [6/8] preinstalling libblkid... [ 3s] [7/8] preinstalling libmount... [ 3s] [8/8] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_7/root,if=virtio,cache=none -drive file=/srv/build/root_7/root,if=ide,index=0,cache=none -drive file=/srv/build/root_7/swap,if=virtio,cache=none -smp 4 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 7s] Waiting for device /dev/vda to appear: ok [ 7s] fsck from util-linux 2.21.2 [ 7s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 7s] /dev/vda: clean, 5096/2392064 files, 188783/9568256 blocks [ 7s] fsck succeeded. Mounting root device read-write. [ 7s] Mounting root /dev/vda [ 7s] mount -o rw -t ext4 /dev/vda /root [ 7s] replacing /etc/mtab with symlink to /proc/self/mounts [ 7s] 2nd stage started in virtual machine [ 7s] machine type: x86_64 [ 7s] switching personality to 8... [ 7s] 2nd stage started in virtual machine [ 7s] machine type: i686 [ 7s] swapon /dev/vdb [ 7s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 7s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 7s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 7s] mount: none is already mounted or /proc busy [ 7s] mount: none is already mounted or /dev/pts busy [ 7s] logging output to //.build.log... [ 7s] processing specfile /.build-srcdir/_service:gbs:dracut.spec ... [ 7s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:dracut.spec build rpmlint-Factory ... [ 7s] running setup postinstall script [ 7s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 7s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 7s] initializing rpm db... [ 7s] [1/121] installing libmagic-data-5.11-1.2 [ 7s] [2/121] installing setup-0.9-1.1 [ 7s] [3/121] installing terminfo-base-5.9-1.1 [ 7s] [4/121] installing filesystem-3.1-1.1 [ 8s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 8s] [5/121] installing glibc-2.18-1.5 [ 8s] [6/121] installing bash-4.2-1.1 [ 8s] [7/121] installing cpio-2.11-1.1 [ 8s] [8/121] installing diffutils-3.3-1.1 [ 8s] [9/121] installing findutils-4.5.10-1.1 [ 8s] [10/121] installing gawk-4.0.1-1.1 [ 8s] [11/121] installing hostname-3.12-1.1 [ 8s] [12/121] installing libattr-2.4.46-1.1 [ 8s] [13/121] installing libbz2-1.0.6-1.4 [ 8s] [14/121] installing libcap-2.24-1.2 [ 8s] [15/121] installing libcares-1.7.5-1.1 [ 8s] [16/121] installing libelf-0.155-1.3 [ 8s] [17/121] installing libexpat-2.1.0-1.1 [ 8s] [18/121] installing libext2fs-1.42.6-1.1 [ 8s] [19/121] installing libfreebl3-3.15.4-1.8 [ 8s] [20/121] installing libgdbm-1.10-1.1 [ 8s] [21/121] installing libgmp-5.1.3-1.1 [ 8s] [22/121] installing libgpg-error-1.10-1.1 [ 8s] [23/121] installing libltdl-2.4.2-1.1 [ 8s] [24/121] installing liblua-5.1.4-1.1 [ 8s] [25/121] installing liblzma-5.0.3-1.2 [ 9s] [26/121] installing libpcre-8.31-1.1 [ 9s] [27/121] installing libpopt-1.16-1.1 [ 9s] [28/121] installing libpython-2.7.3-1.2 [ 9s] [29/121] installing libsmack-1.0.3.1-1.1 [ 9s] [30/121] installing libsqlite-3.7.14-1.1 [ 9s] [31/121] installing libuuid-2.24-1.1 [ 9s] [32/121] installing m4-1.4.16-1.1 [ 9s] [33/121] installing net-tools-2.0_20121208git-1.1 [ 9s] [34/121] installing nspr-4.10.2-1.1 [ 9s] [35/121] installing patch-2.7-1.1 [ 9s] [36/121] installing pkg-config-0.28-1.1 [ 9s] [37/121] installing sed-4.2.1-1.1 [ 9s] [38/121] installing tar-1.27-1.1 [ 9s] [39/121] installing update-alternatives-1.16.3-1.1 [ 9s] [40/121] installing which-2.20-1.1 [ 9s] [41/121] installing zlib-1.2.7-1.1 [ 9s] [42/121] installing libncurses-5.9-1.1 [ 9s] [43/121] installing build-compare-2012.01.26-1.4 [ 9s] [44/121] installing dash-0.5.7-1.1 [ 9s] [45/121] installing grep-2.16-1.1 [ 9s] [46/121] installing less-458-1.1 [ 9s] [47/121] installing libacl-2.2.51-1.1 [ 9s] [48/121] installing libasm-0.155-1.3 [ 9s] [49/121] installing libatomic-4.8.2-1.10 [ 9s] [50/121] installing libblkid-2.24-1.1 [ 9s] [51/121] installing libgcc_s1-4.8.2-1.10 [ 10s] [52/121] installing libgcrypt-1.5.0-1.1 [ 10s] [53/121] installing libgomp-4.8.2-1.10 [ 10s] [54/121] installing libidn-1.25-1.1 [ 10s] [55/121] installing libmpfr-3.1.1-1.1 [ 10s] [56/121] installing libopenssl-1.0.1h-1.2 [ 10s] [57/121] installing libreadline-5.2-1.1 [ 10s] [58/121] installing make-3.82-1.1 [ 10s] [59/121] installing nss-certs-3.15.4-1.8 [ 10s] [60/121] installing smack-1.0.3.1-1.1 [ 10s] [61/121] installing bzip2-1.0.6-1.4 [ 10s] [62/121] installing libmagic-5.11-1.2 [ 10s] [63/121] installing libxml2-2.8.0-1.1 [ 10s] [64/121] installing xz-5.0.3-1.2 [ 10s] [65/121] installing binutils-2.23.1-1.1 [ 12s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 12s] [66/121] installing libdw-0.155-1.3 [ 12s] [67/121] installing file-5.11-1.2 [ 12s] [68/121] installing libitm-4.8.2-1.10 [ 12s] [69/121] installing libmount-2.24-1.1 [ 12s] [70/121] installing libmpc-1.0-1.1 [ 12s] [71/121] installing libstdc++-4.8.2-1.10 [ 12s] [72/121] installing libxml2-tools-2.8.0-1.1 [ 12s] [73/121] installing rsync-3.0.8-1.1 [ 13s] [74/121] installing libcurl-7.32.0-1.1 [ 13s] [75/121] installing libxslt-1.1.26-1.1 [ 13s] [76/121] installing db4-4.8.30.NC-1.1 [ 13s] [77/121] installing libxslt-tools-1.1.26-1.1 [ 13s] [78/121] installing libasan-4.8.2-1.10 [ 13s] [79/121] installing cpp48-4.8.2-1.10 [ 13s] [80/121] installing elfutils-0.155-1.3 [ 13s] [81/121] installing cpp-4.8-1.1 [ 13s] [82/121] installing perl-5.16.3-1.2 [ 25s] [83/121] installing python-2.7.3-1.2 [ 27s] [84/121] installing build-mkbaselibs-20120927-1.2 [ 27s] [85/121] installing perl-Error-0.17017-1.1 [ 27s] [86/121] installing autoconf-2.69-1.1 [ 27s] [87/121] installing python-xml-2.7.3-1.2 [ 27s] [88/121] installing build-20120927-1.2 [ 27s] [89/121] installing pam-1.1.6-1.2 [ 28s] [90/121] installing nss-3.15.4-1.8 [ 28s] [91/121] installing pam-modules-extra-1.1.6-1.2 [ 28s] [92/121] installing pwdutils-3.2.19-1.1 [ 28s] [93/121] installing libsoftokn3-3.15.4-1.8 [ 28s] [94/121] installing coreutils-8.21-1.1 [ 28s] [95/121] installing util-linux-2.24-1.1 [ 28s] [96/121] installing rpm-4.11.0.1-1.1 [ 29s] [97/121] installing linux-glibc-devel-3.10-1.1 [ 31s] [98/121] installing glibc-locale-2.18-1.5 [ 31s] [99/121] installing gzip-1.6-1.1 [ 31s] [100/121] installing automake-1.12.1-1.1 [ 32s] [101/121] installing sgml-skel-0.6-1.1 [ 32s] [102/121] installing tzdata-2012e-1.1 [ 32s] [103/121] installing openssh-6.2p2-1.1 [ 32s] [104/121] installing rpmlint-mini-1.4-1.2 [ 32s] [105/121] installing rpm-security-plugin-4.11.0.1-1.1 [ 33s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 33s] [106/121] installing rpmlint-tizen-1.0-1.1 [ 33s] [107/121] installing glibc-devel-2.18-1.5 [ 34s] [108/121] installing iso_ent-2000.11.03-1.1 [ 34s] [109/121] installing libtool-2.4.2-1.1 [ 34s] [110/121] installing xmlcharent-0.3-1.1 [ 34s] [111/121] installing git-core-1.8.1.3-1.1 [ 34s] [112/121] installing git-1.8.1.3-1.1 [ 34s] [113/121] installing libstdc++48-devel-4.8.2-1.10 [ 37s] [114/121] installing docbook_4-4.5-1.1 [ 39s] [115/121] installing gcc48-4.8.2-1.10 [ 39s] [116/121] installing gcc-4.8-1.1 [ 39s] [117/121] installing gcc48-c++-4.8.2-1.10 [ 40s] [118/121] installing docbook-xsl-stylesheets-1.77.1-1.3 [ 42s] [119/121] installing gcc-c++-4.8-1.1 [ 42s] [120/121] installing asciidoc-8.6.6-1.1 [ 42s] [121/121] installing rpm-build-4.11.0.1-1.1 [ 42s] removing nis flags from //etc/nsswitch.conf... [ 42s] now finalizing build dir... [ 43s] build target is i686-tizen-linux [ 43s] ----------------------------------------------------------------- [ 43s] I have the following modifications for dracut.spec: [ 43s] 9c9 [ 43s] < Release: 0 [ 43s] --- [ 43s] > Release: 1.3 [ 43s] 252a253 [ 43s] > %changelog [ 43s] ----------------------------------------------------------------- [ 43s] ----- building dracut.spec (user abuild) [ 43s] ----------------------------------------------------------------- [ 43s] ----------------------------------------------------------------- [ 43s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0.M14.2:IVI/emulator/53ca5b232721bf6259ff30f3a7073f2e-dracut' /home/abuild/rpmbuild/SOURCES/dracut.spec [ 43s] Building target platforms: i686-tizen-linux [ 43s] Building for target i686-tizen-linux [ 43s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.nJ1JGM [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + rm -rf dracut-032 [ 43s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/dracut-032.tar.xz [ 43s] + /bin/tar -xf - [ 43s] + STATUS=0 [ 43s] + '[' 0 -ne 0 ']' [ 43s] + cd dracut-032 [ 43s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 43s] + cp /home/abuild/rpmbuild/SOURCES/dracut.manifest . [ 43s] + exit 0 [ 43s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.py5vXb [ 43s] + umask 022 [ 43s] + cd /home/abuild/rpmbuild/BUILD [ 43s] + cd dracut-032 [ 43s] + LANG=C [ 43s] + export LANG [ 43s] + unset DISPLAY [ 43s] + CFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 43s] + export CFLAGS [ 43s] + CXXFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables' [ 43s] + export CXXFLAGS [ 43s] + FFLAGS='-O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -I%_fmoddir' [ 43s] + export FFLAGS [ 43s] + LD_AS_NEEDED=1 [ 43s] + export LD_AS_NEEDED [ 43s] + make all [ 43s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/dracut-install.o install/dracut-install.c [ 43s] install/dracut-install.c: In function 'resolve_deps': [ 43s] install/dracut-install.c:338:21: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result] [ 43s] read(fd, buf, LINE_MAX); [ 43s] ^ [ 43s] install/dracut-install.c: In function 'cp': [ 43s] install/dracut-install.c:223:39: warning: ignoring return value of 'fchown', declared with attribute warn_unused_result [-Wunused-result] [ 43s] fchown(dest_desc, (__uid_t)-1, sb.st_gid); [ 43s] ^ [ 44s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/hashmap.o install/hashmap.c [ 44s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/log.o install/log.c [ 44s] cc -O2 -g -m32 -march=i686 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -fstack-protector -funwind-tables -fasynchronous-unwind-tables -std=gnu99 -D_FILE_OFFSET_BITS=64 -c -o install/util.o install/util.c [ 44s] cc install/dracut-install.o install/hashmap.o install/log.o install/util.o -o install/dracut-install [ 44s] ln -fs install/dracut-install dracut-install [ 44s] asciidoc -d manpage -b docbook -o lsinitrd.1.xml lsinitrd.1.asc [ 44s] xsltproc -o lsinitrd.1 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl lsinitrd.1.xml [ 45s] Note: Writing lsinitrd.1 [ 45s] asciidoc -d manpage -b docbook -o dracut.conf.5.xml dracut.conf.5.asc [ 45s] xsltproc -o dracut.conf.5 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.conf.5.xml [ 45s] Note: Writing dracut.conf.5 [ 45s] asciidoc -d manpage -b docbook -o dracut.cmdline.7.xml dracut.cmdline.7.asc [ 47s] xsltproc -o dracut.cmdline.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.cmdline.7.xml [ 47s] Note: Writing dracut.cmdline.7 [ 47s] asciidoc -d manpage -b docbook -o dracut.bootup.7.xml dracut.bootup.7.asc [ 47s] xsltproc -o dracut.bootup.7 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.bootup.7.xml [ 48s] Note: Writing dracut.bootup.7 [ 48s] asciidoc -d manpage -b docbook -o dracut.8.xml dracut.8.asc [ 49s] xsltproc -o dracut.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut.8.xml [ 49s] Note: Writing dracut.8 [ 49s] asciidoc -d manpage -b docbook -o dracut-catimages.8.xml dracut-catimages.8.asc [ 49s] xsltproc -o dracut-catimages.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl dracut-catimages.8.xml [ 49s] Note: Writing dracut-catimages.8 [ 49s] asciidoc -d manpage -b docbook -o mkinitrd.8.xml mkinitrd.8.asc [ 50s] xsltproc -o mkinitrd.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl mkinitrd.8.xml [ 50s] Note: Writing mkinitrd.8 [ 50s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-cmdline.service.8.xml modules.d/98systemd/dracut-cmdline.service.8.asc [ 50s] xsltproc -o modules.d/98systemd/dracut-cmdline.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-cmdline.service.8.xml [ 51s] Note: Writing dracut-cmdline.service.8 [ 51s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-initqueue.service.8.asc [ 51s] xsltproc -o modules.d/98systemd/dracut-initqueue.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-initqueue.service.8.xml [ 51s] Note: Writing dracut-initqueue.service.8 [ 51s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-mount.service.8.xml modules.d/98systemd/dracut-mount.service.8.asc [ 51s] xsltproc -o modules.d/98systemd/dracut-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-mount.service.8.xml [ 52s] Note: Writing dracut-mount.service.8 [ 52s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-shutdown.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.asc [ 52s] xsltproc -o modules.d/98systemd/dracut-shutdown.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-shutdown.service.8.xml [ 52s] Note: Writing dracut-shutdown.service.8 [ 52s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-mount.service.8.xml modules.d/98systemd/dracut-pre-mount.service.8.asc [ 52s] xsltproc -o modules.d/98systemd/dracut-pre-mount.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-mount.service.8.xml [ 53s] Note: Writing dracut-pre-mount.service.8 [ 53s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-pivot.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.asc [ 53s] xsltproc -o modules.d/98systemd/dracut-pre-pivot.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-pivot.service.8.xml [ 53s] Note: Writing dracut-pre-pivot.service.8 [ 53s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.asc [ 53s] xsltproc -o modules.d/98systemd/dracut-pre-trigger.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-trigger.service.8.xml [ 54s] Note: Writing dracut-pre-trigger.service.8 [ 54s] asciidoc -d manpage -b docbook -o modules.d/98systemd/dracut-pre-udev.service.8.xml modules.d/98systemd/dracut-pre-udev.service.8.asc [ 54s] xsltproc -o modules.d/98systemd/dracut-pre-udev.service.8 -nonet http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl modules.d/98systemd/dracut-pre-udev.service.8.xml [ 54s] Note: Writing dracut-pre-udev.service.8 [ 54s] asciidoc -a numbered -d book -b docbook -o dracut.xml dracut.asc [ 58s] xsltproc -o dracut.html --xinclude -nonet \ [ 58s] --stringparam html.stylesheet \ [ 58s] http://docs.fedoraproject.org/en-US/Common_Content/css/default.css \ [ 58s] http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl dracut.xml [ 58s] rm -f -- dracut.xml [ 58s] rm modules.d/98systemd/dracut-mount.service.8.xml dracut.8.xml dracut.cmdline.7.xml modules.d/98systemd/dracut-pre-mount.service.8.xml dracut.bootup.7.xml modules.d/98systemd/dracut-initqueue.service.8.xml modules.d/98systemd/dracut-pre-pivot.service.8.xml mkinitrd.8.xml modules.d/98systemd/dracut-cmdline.service.8.xml dracut.conf.5.xml lsinitrd.1.xml modules.d/98systemd/dracut-pre-udev.service.8.xml dracut-catimages.8.xml modules.d/98systemd/dracut-pre-trigger.service.8.xml modules.d/98systemd/dracut-shutdown.service.8.xml [ 58s] + exit 0 [ 58s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.FHjF0v [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd dracut-032 [ 58s] + LANG=C [ 58s] + export LANG [ 58s] + unset DISPLAY [ 58s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 [ 58s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 libdir=/usr/lib bindir=/usr/bin systemdsystemunitdir=/usr/lib/systemd/system sysconfdir=/etc mandir=/usr/share/man [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/bin [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/modules.d [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man1 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man5 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man8 [ 58s] install -m 0755 dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/bin/dracut [ 58s] install -m 0755 dracut-catimages.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/bin/dracut-catimages [ 58s] install -m 0755 mkinitrd-dracut.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/bin/mkinitrd [ 58s] install -m 0755 lsinitrd.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/bin/lsinitrd [ 58s] install -m 0644 dracut.conf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc/dracut.conf [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc/dracut.conf.d [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut.conf.d [ 58s] install -m 0755 dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-functions.sh [ 58s] install -m 0755 dracut-version.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-version.sh [ 58s] ln -fs dracut-functions.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-functions [ 58s] install -m 0755 dracut-logger.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-logger.sh [ 58s] install -m 0755 dracut-initramfs-restore.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-initramfs-restore [ 58s] cp -arx modules.d /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut [ 58s] for i in lsinitrd.1; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man1/${i##*/}; done [ 58s] for i in dracut.conf.5; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man5/${i##*/}; done [ 58s] for i in dracut.cmdline.7 dracut.bootup.7; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man7/${i##*/}; done [ 58s] for i in dracut.8 dracut-catimages.8 mkinitrd.8 modules.d/98systemd/dracut-cmdline.service.8 modules.d/98systemd/dracut-initqueue.service.8 modules.d/98systemd/dracut-mount.service.8 modules.d/98systemd/dracut-shutdown.service.8 modules.d/98systemd/dracut-pre-mount.service.8 modules.d/98systemd/dracut-pre-pivot.service.8 modules.d/98systemd/dracut-pre-trigger.service.8 modules.d/98systemd/dracut-pre-udev.service.8; do install -m 0644 $i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man8/${i##*/}; done [ 58s] ln -fs dracut.cmdline.7 /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/man/man7/dracut.kernel.7 [ 58s] if [ -n "/usr/lib/systemd/system" ]; then \ [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system; \ [ 58s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/modules.d/98systemd/dracut-shutdown.service /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system/dracut-shutdown.service; \ [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system/shutdown.target.wants; \ [ 58s] ln -s ../dracut-shutdown.service \ [ 58s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system/shutdown.target.wants/dracut-shutdown.service; \ [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system/initrd.target.wants; \ [ 58s] for i in \ [ 58s] dracut-cmdline.service \ [ 58s] dracut-initqueue.service \ [ 58s] dracut-mount.service \ [ 58s] dracut-pre-mount.service \ [ 58s] dracut-pre-pivot.service \ [ 58s] dracut-pre-trigger.service \ [ 58s] dracut-pre-udev.service \ [ 58s] ; do \ [ 58s] ln -srf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/modules.d/98systemd/$i /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system; \ [ 58s] ln -s ../$i \ [ 58s] /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/systemd/system/initrd.target.wants/$i; \ [ 58s] done \ [ 58s] fi [ 58s] if [ -f install/dracut-install ]; then \ [ 58s] install -m 0755 install/dracut-install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-install; \ [ 58s] fi [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/kernel/install.d [ 58s] install -m 0755 50-dracut.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/kernel/install.d/50-dracut.install [ 58s] install -m 0755 51-dracut-rescue.install /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/kernel/install.d/51-dracut-rescue.install [ 58s] mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/bash-completion/completions [ 58s] install -m 0644 dracut-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/bash-completion/completions/dracut [ 58s] install -m 0644 lsinitrd-bash-completion.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/bash-completion/completions/lsinitrd [ 58s] + echo DRACUT_VERSION=032-1.3 [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/01fips [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/02fips-aesni [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/50gensplash [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/96securityfs [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/97masterkey [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/98integrity [ 58s] + rm -fr /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386//usr/lib/dracut/modules.d/98selinux [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/boot/dracut [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/var/lib/dracut/overlay [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/var/log [ 58s] + touch /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/var/log/dracut.log [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/com/initramfs [ 58s] + install -m 0644 dracut.conf.d/suse.conf.example /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc/dracut.conf.d/01-dist.conf [ 58s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc/logrotate.d [ 58s] + install -m 0644 dracut.logrotate /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/etc/logrotate.d/dracut_log [ 58s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/dracut-032 [ 58s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/lib/dracut/dracut-install [ 59s] cpio: glibc-2.18/csu: Cannot stat: No such file or directory [ 59s] cpio: glibc-2.18/csu/elf-init.c: Cannot stat: No such file or directory [ 59s] cpio: glibc-2.18/csu/init.c: Cannot stat: No such file or directory [ 59s] cpio: glibc-2.18/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 59s] cpio: glibc-2.18/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 59s] cpio: glibc-2.18/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 59s] 195 blocks [ 59s] + /usr/lib/rpm/brp-compress [ 59s] + /usr/lib/rpm/brp-tizen [ 59s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 [ 59s] Processing files: dracut-032-1.3.i686 [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.6iBH0R [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + cd dracut-032 [ 59s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/licenses/dracut [ 59s] + export LICENSEDIR [ 59s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/licenses/dracut [ 59s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386/usr/share/licenses/dracut [ 59s] + exit 0 [ 59s] Provides: config(dracut) = 032-1.3 dracut = 032-1.3 dracut(x86-32) = 032-1.3 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) [ 59s] Conflicts: systemd < 187 [ 59s] Processing files: dracut-debugsource-032-1.3.i686 [ 59s] Provides: dracut-debugsource = 032-1.3 dracut-debugsource(x86-32) = 032-1.3 [ 59s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 59s] Processing files: dracut-network-032-1.3.i686 [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Provides: dracut-network = 032-1.3 dracut-network(x86-32) = 032-1.3 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /bin/bash /bin/sh [ 59s] Processing files: dracut-caps-032-1.3.i686 [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Provides: dracut-caps = 032-1.3 dracut-caps(x86-32) = 032-1.3 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /bin/bash [ 59s] Processing files: dracut-tools-032-1.3.i686 [ 59s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 59s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 59s] [ 59s] Provides: dracut-tools = 032-1.3 dracut-tools(x86-32) = 032-1.3 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Requires: /bin/bash [ 59s] Processing files: dracut-debuginfo-032-1.3.i686 [ 59s] Provides: debuginfo(build-id) = 9d38082d2cdeea7c0e992b07321b9643b9966cb8 [ 59s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 59s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 [ 59s] Wrote: /home/abuild/rpmbuild/SRPMS/dracut-032-1.3.src.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.3.i686.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.3.i686.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.3.i686.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.3.i686.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.3.i686.rpm [ 60s] Wrote: /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.3.i686.rpm [ 60s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.losWJ2 [ 60s] + umask 022 [ 60s] + cd /home/abuild/rpmbuild/BUILD [ 60s] + cd dracut-032 [ 60s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/dracut-032-1.3.i386 [ 60s] + exit 0 [ 60s] ... checking for files with abuild user/group [ 60s] [ 60s] RPMLINT report: [ 60s] =============== [ 60s] dracut.i686: W: tizen-filelist-forbidden-fhs23 /usr/com is not allowed in FHS 2.3 [ 60s] see http://www.pathname.com/fhs/ to find a better location [ 60s] [ 60s] dracut.i686: W: script-without-shebang /usr/lib/dracut/dracut-version.sh [ 60s] This text file has executable bits set or is located in a path dedicated for [ 60s] executables, but lacks a shebang and cannot thus be executed. If the file is [ 60s] meant to be an executable script, add the shebang, otherwise remove the [ 60s] executable bits or move the file elsewhere. [ 60s] [ 60s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh 0644L /bin/sh [ 60s] dracut.i686: W: non-executable-script /usr/share/bash-completion/completions/lsinitrd 0644L /bin/bash [ 60s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh 0644L /bin/sh [ 60s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/50drm/module-setup.sh 0644L /bin/bash [ 60s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/module-setup.sh 0644L /bin/bash [ 60s] dracut.i686: W: non-executable-script /usr/lib/dracut/modules.d/03modsign/load-modsign-keys.sh 0644L /bin/sh [ 60s] dracut.i686: W: non-executable-script /usr/share/bash-completion/completions/dracut 0644L /bin/bash [ 60s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/net-lib.sh 0644L /bin/sh [ 60s] dracut-network.i686: W: non-executable-script /usr/lib/dracut/modules.d/40network/parse-vlan.sh 0644L /bin/sh [ 60s] This text file contains a shebang or is located in a path dedicated for [ 60s] executables, but lacks the executable bits and cannot thus be executed. If [ 60s] the file is meant to be an executable script, add the executable bits, [ 60s] otherwise remove the shebang or move the file elsewhere. [ 60s] [ 60s] dracut.i686: W: missing-dependency-to-logrotate for logrotate script /etc/logrotate.d/dracut_log [ 60s] This package installs a file in /etc/logrotate.d/ but doesn't require [ 60s] logrotate to be installed. Because logrotate is not part of the essential [ 60s] packages, your package should explicitely depend on logrotate to make sure [ 60s] that your logrotate job is executed. If it is an optional feature of your [ 60s] package, recommend or suggest logrotate. [ 60s] [ 60s] dracut.i686: W: incoherent-logrotate-file /etc/logrotate.d/dracut_log [ 60s] Your logrotate file should be named /etc/logrotate.d/. [ 60s] [ 60s] dracut.i686: W: ghost-files-without-postin [ 60s] dracut-caps.i686: W: explicit-lib-dependency libcap [ 60s] You must let rpm find the library dependencies by itself. Do not put unneeded [ 60s] explicit Requires: tags. [ 60s] [ 60s] 5 packages and 0 specfiles checked; 0 errors, 15 warnings. [ 60s] [ 60s] ... creating baselibs [ 61s] ... comparing built packages with the former built [ 61s] /usr/lib/build/rpm-check.sh [ 61s] compare /.build.oldpackages/dracut-032-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/dracut-032-1.3.src.rpm [ 61s] compare /.build.oldpackages/dracut-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.3.i686.rpm [ 61s] /usr/lib/dracut/dracut-version.sh differs ( ASCII text) [ 61s] --- old//usr/lib/dracut/dracut-version.sh 2014-07-17 15:47:46.000000000 +0000 [ 61s] +++ new//usr/lib/dracut/dracut-version.sh 2014-07-18 04:25:34.000000000 +0000 [ 61s] @@ -1 +1 @@ [ 61s] -DRACUT_VERSION=032-1.2 [ 61s] +DRACUT_VERSION=032-1.3 [ 61s] compare /.build.oldpackages/dracut-caps-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.3.i686.rpm [ 61s] compare /.build.oldpackages/dracut-debuginfo-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.3.i686.rpm [ 61s] compare /.build.oldpackages/dracut-debugsource-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.3.i686.rpm [ 62s] compare /.build.oldpackages/dracut-network-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.3.i686.rpm [ 62s] compare /.build.oldpackages/dracut-tools-032-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.3.i686.rpm [ 62s] comparing /.build.oldpackages/rpmlint.log and /home/abuild/rpmbuild/OTHER/rpmlint.log [ 62s] ... saving built statistics [ 62s] ... saving built packages [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-caps-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-debuginfo-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-debugsource-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-network-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/RPMS/i686/dracut-tools-032-1.3.i686.rpm [ 62s] /home/abuild/rpmbuild/SRPMS/dracut-032-1.3.src.rpm [ 62s] /home/abuild/rpmbuild/OTHER/_statistics [ 62s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 62s] [ 62s] w04 finished "build dracut.spec" at Fri Jul 18 04:25:38 UTC 2014. [ 62s] [ 65s] [ 59.356504] SysRq : Power Off [ 66s] [ 59.568301] Power down. [ 66s] build: extracting built packages... [ 66s] dracut-032-1.3.i686.rpm [ 66s] dracut-caps-032-1.3.i686.rpm [ 66s] dracut-debuginfo-032-1.3.i686.rpm [ 66s] dracut-debugsource-032-1.3.i686.rpm [ 66s] dracut-network-032-1.3.i686.rpm [ 66s] dracut-tools-032-1.3.i686.rpm [ 66s] dracut-032-1.3.src.rpm [ 66s] _statistics [ 66s] rpmlint.log