[ 0s] Using BUILD_ROOT=/srv/build/root_4/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_4/root [ 0s] [ 0s] [ 0s] w17 started "build _service:gbs:can-utils.spec" at Mon Jan 19 22:51:20 UTC 2015. [ 0s] [ 0s] Building can-utils for project 'Tizen:3.0:IVI' repository 'arm' arch 'armv7l' srcmd5 'c3716b8ed7d2d11ab59c5797c93cf3e0' [ 0s] [ 0s] processing specfile /srv/build/root_4/.build-srcdir/_service:gbs:can-utils.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_4/.build-srcdir/_service:gbs:can-utils.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/4/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_4/.build.rpmlist /srv/build/root_4/.build-srcdir/_service:gbs:can-utils.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/40] preinstalling libmagic-data... [ 0s] [2/40] preinstalling setup... [ 0s] [3/40] preinstalling filesystem... [ 0s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc_s1... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling tar... [ 1s] [24/40] preinstalling zlib... [ 1s] [25/40] preinstalling qemu-accel-armv7l-cross-arm... [ 5s] [26/40] preinstalling qemu-linux-user-cross-arm... [ 5s] [27/40] preinstalling libacl... [ 5s] [28/40] preinstalling libblkid... [ 5s] [29/40] preinstalling libreadline... [ 5s] [30/40] preinstalling smack... [ 5s] [31/40] preinstalling bzip2... [ 5s] [32/40] preinstalling libmagic... [ 5s] [33/40] preinstalling libxml2... [ 5s] [34/40] preinstalling libmount... [ 5s] [35/40] preinstalling coreutils... [ 6s] [36/40] preinstalling util-linux... [ 6s] [37/40] preinstalling nss... [ 6s] [38/40] preinstalling libsoftokn3... [ 6s] [39/40] preinstalling rpm... [ 6s] [40/40] preinstalling rpm-security-plugin... [ 6s] [ 6s] [1/8] preinstalling libext2fs... [ 6s] [2/8] preinstalling libpcre... [ 6s] [3/8] preinstalling libuuid... [ 6s] [4/8] preinstalling perl... [ 7s] [5/8] preinstalling grep... [ 7s] [6/8] preinstalling libblkid... [ 7s] [7/8] preinstalling libmount... [ 7s] [8/8] preinstalling util-linux... [ 7s] copying packages... [ 7s] reordering...cycle: gcc49-locale -> gcc49 [ 7s] breaking dependency gcc49 -> gcc49-locale [ 7s] cycle: coreutils -> pam [ 7s] breaking dependency pam -> coreutils [ 7s] cycle: nss -> libsoftokn3 [ 7s] breaking dependency nss -> libsoftokn3 [ 7s] done [ 18s] booting kvm ... [ 18s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 8000 -drive file=/srv/build/root_4/root,if=virtio,cache=none -drive file=/srv/build/root_4/root,if=ide,index=0,cache=none -drive file=/srv/build/root_4/swap,if=virtio,cache=none -smp 6 [ 21s] doing fast boot [ 21s] Creating device nodes with udev [ 23s] Waiting for device /dev/vda to appear: ok [ 23s] fsck from util-linux 2.21.2 [ 23s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 23s] /dev/vda: clean, 11534/2392064 files, 278155/9568256 blocks [ 23s] fsck succeeded. Mounting root device read-write. [ 23s] Mounting root /dev/vda [ 23s] mount -o rw -t ext4 /dev/vda /root [ 24s] replacing /etc/mtab with symlink to /proc/self/mounts [ 24s] 2nd stage started in virtual machine [ 24s] machine type: armv7l [ 24s] swapon /dev/vdb [ 24s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 24s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 25s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 25s] mount: none is already mounted or /proc busy [ 25s] mount: none is already mounted or /dev/pts busy [ 25s] logging output to //.build.log... [ 25s] processing specfile /.build-srcdir/_service:gbs:can-utils.spec ... [ 25s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:can-utils.spec build rpmlint-Factory ... [ 25s] running qemu-accel-armv7l-cross-arm postinstall script [ 25s] ++ uname -m [ 25s] + '[' armv7l = armv7l ']' [ 25s] + builtin echo armv7l arch [ 25s] armv7l arch [ 25s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 25s] + /usr/sbin/ldconfig [ 25s] /usr/sbin/ldconfig: libraries libnsl.so.1 and libnsl-2.20.so in directory /lib have same soname but different type. [ 25s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 25s] + did_mount_it= [ 25s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 25s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 25s] + builtin echo Registering accelerated handler [ 25s] Registering accelerated handler [ 25s] + builtin echo -1 [ 25s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 25s] + '[' ']' [ 25s] + builtin echo All done [ 25s] All done [ 25s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 25s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 26s] + builtin echo 0 [ 26s] + '[' -f /usr/bin/gcc ']' [ 26s] running setup postinstall script [ 26s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 26s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 26s] initializing rpm db... [ 28s] [1/100] installing libmagic-data-5.18-13.1 [ 33s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 34s] [2/100] installing libstdc++-locale-4.9.2-5.5 [ 41s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 42s] [3/100] installing setup-0.9-6.5 [ 63s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 65s] [4/100] installing terminfo-base-5.9-8.1 [ 67s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 69s] [5/100] installing filesystem-3.1-9.1 [ 81s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 81s] [6/100] installing glibc-2.20-11.4 [ 82s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 83s] [7/100] installing libatomic-4.9.2-5.5 [ 83s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 83s] [8/100] installing libgcc_s1-4.9.2-5.5 [ 84s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 84s] [9/100] installing libgomp-4.9.2-5.5 [ 85s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 85s] [10/100] installing bash-4.3.30-7.12 [ 85s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 86s] [11/100] installing cpio-2.11-5.6 [ 86s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 86s] [12/100] installing diffutils-3.3-5.5 [ 87s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [13/100] installing findutils-4.5.14-10.1 [ 88s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [14/100] installing gawk-4.1.1-6.2 [ 88s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 88s] [15/100] installing hostname-3.12-4.5 [ 88s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 89s] [16/100] installing libattr-2.4.47-9.1 [ 89s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 89s] [17/100] installing libbz2-1.0.6-8.2 [ 90s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 90s] [18/100] installing libcap-2.24-9.2 [ 90s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 90s] [19/100] installing libelf-0.160-7.1 [ 91s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 91s] [20/100] installing libext2fs-1.42.11-7.7 [ 91s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 91s] [21/100] installing libfreebl3-3.17.1-9.7 [ 92s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 92s] [22/100] installing libgdbm-1.11-9.1 [ 92s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 92s] [23/100] installing libgmp-6.0.0-8.1 [ 92s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 93s] [24/100] installing libitm-4.9.2-5.5 [ 93s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 93s] [25/100] installing libltdl-2.4.2-7.1 [ 93s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 93s] [26/100] installing liblua-5.1.4-6.1 [ 94s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 94s] [27/100] installing liblzma-5.1.3-8.1 [ 94s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 95s] [28/100] installing libpcre-8.31-4.5 [ 96s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 96s] [29/100] installing libpopt-1.16-8.1 [ 97s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 97s] [30/100] installing libsmack-1.0.5-9.1 [ 98s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 98s] [31/100] installing libsqlite-3.7.14-11.1 [ 98s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 98s] [32/100] installing libuuid-2.24.2-7.9 [ 98s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 98s] [33/100] installing m4-1.4.17-5.1 [ 99s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 99s] [34/100] installing net-tools-2.0_20121208git-7.1 [ 100s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 100s] [35/100] installing nspr-4.10.7-10.1 [ 101s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 101s] [36/100] installing patch-2.7-7.1 [ 101s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 101s] [37/100] installing pkg-config-0.28-7.1 [ 102s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 102s] [38/100] installing sed-4.2.2-5.1 [ 103s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 103s] [39/100] installing tar-1.27-4.5 [ 103s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 104s] [40/100] installing update-alternatives-1.16.3-5.5 [ 104s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 105s] [41/100] installing which-2.20-4.6 [ 105s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 105s] [42/100] installing zlib-1.2.8-8.1 [ 106s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 106s] [43/100] installing libncurses-5.9-8.1 [ 106s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 107s] [44/100] installing libstdc++-4.9.2-5.5 [ 107s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 107s] [45/100] installing build-compare-2014.11.25-6.6 [ 107s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 108s] [46/100] installing gcc49-info-4.9.2-5.5 [ 109s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 109s] [47/100] installing qemu-linux-user-cross-arm-2.2.0-10.1 [ 112s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 112s] [48/100] installing db4-4.8.30.NC-11.1 [ 113s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 113s] [49/100] installing grep-2.16-6.1 [ 113s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 113s] [50/100] installing less-466-5.1 [ 114s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 114s] [51/100] installing libacl-2.2.52-10.1 [ 114s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 114s] [52/100] installing libasan-4.9.2-5.5 [ 114s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 114s] [53/100] installing libasm-0.160-7.1 [ 115s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 115s] [54/100] installing libblkid-2.24.2-7.9 [ 115s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 115s] [55/100] installing libmpfr-3.1.2-8.1 [ 116s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 116s] [56/100] installing libreadline-5.2-8.1 [ 116s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 116s] [57/100] installing libubsan-4.9.2-5.5 [ 116s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 116s] [58/100] installing make-4.0-6.1 [ 117s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 117s] [59/100] installing nss-certs-3.17.1-9.7 [ 117s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 117s] [60/100] installing smack-1.0.5-9.1 [ 117s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 118s] [61/100] installing bzip2-1.0.6-8.2 [ 118s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 118s] [62/100] installing libmagic-5.18-13.1 [ 118s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 118s] [63/100] installing libxml2-2.8.0-8.1 [ 119s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 119s] [64/100] installing xz-5.1.3-8.1 [ 119s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 120s] [65/100] installing binutils-2.24.90-9.2 [ 123s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 123s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 123s] [66/100] installing libdw-0.160-7.1 [ 124s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 124s] [67/100] installing file-5.18-13.1 [ 124s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 125s] [68/100] installing libmount-2.24.2-7.9 [ 126s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 126s] [69/100] installing libmpc-1.0-5.1 [ 126s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 127s] [70/100] installing perl-5.20.0-9.1 [ 155s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 155s] [71/100] installing elfutils-0.160-7.1 [ 155s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 155s] [72/100] installing build-mkbaselibs-20120927-7.1 [ 156s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 156s] [73/100] installing autoconf-2.69-8.1 [ 156s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 156s] [74/100] installing cpp49-4.9.2-5.5 [ 157s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 157s] [75/100] installing cpp-4.9-8.1 [ 157s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 157s] [76/100] installing build-20120927-7.1 [ 157s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 157s] [77/100] installing pam-1.1.6-11.1 [ 157s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 157s] [78/100] installing nss-3.17.1-9.7 [ 157s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 158s] [79/100] installing libsoftokn3-3.17.1-9.7 [ 158s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 158s] [80/100] installing coreutils-8.21-7.6 [ 158s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 158s] [81/100] installing util-linux-2.24.2-7.9 [ 159s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 159s] [82/100] installing rpm-4.11.0.1-22.1 [ 161s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [83/100] installing linux-glibc-devel-3.10-6.1 [ 161s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 161s] [84/100] installing glibc-locale-2.20-11.4 [ 163s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [85/100] installing automake-1.14.1-9.1 [ 163s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [86/100] installing gzip-1.6-8.1 [ 163s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 163s] [87/100] installing tzdata-2014h-5.1 [ 164s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 164s] [88/100] installing rpmlint-mini-1.5-5.14 [ 164s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 164s] [89/100] installing rpm-security-plugin-4.11.0.1-22.1 [ 164s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 165s] [90/100] installing rpmlint-tizen-1.0-4.1 [ 165s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 165s] [91/100] installing glibc-devel-2.20-11.4 [ 166s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [92/100] installing libtool-2.4.2-7.1 [ 166s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [93/100] installing libstdc++49-devel-4.9.2-5.5 [ 166s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 166s] [94/100] installing gcc49-4.9.2-5.5 [ 167s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 167s] [95/100] installing gcc49-locale-4.9.2-5.5 [ 168s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [96/100] installing gcc-4.9-8.1 [ 168s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 168s] [97/100] installing gcc49-c++-4.9.2-5.5 [ 169s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 169s] [98/100] installing gcc-c++-4.9-8.1 [ 169s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 169s] [99/100] installing qemu-accel-armv7l-cross-arm-0.4-5.2 [ 248s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 248s] ++ uname -m [ 248s] + '[' armv7l = armv7l ']' [ 248s] + builtin echo armv7l arch [ 248s] armv7l arch [ 248s] + ln -sf /emul/i586-for-arm/lib/libnsl.so.1 /lib/libnsl.so.1 [ 248s] + /usr/sbin/ldconfig [ 248s] /usr/sbin/ldconfig: libraries libnsl.so.1 and libnsl-2.20.so in directory /lib have same soname but different type. [ 248s] + '[' '!' -d /proc/sys/fs/binfmt_misc ']' [ 248s] + did_mount_it= [ 248s] + '[' '!' -f /proc/sys/fs/binfmt_misc/register ']' [ 248s] + '[' -e /proc/sys/fs/binfmt_misc/arm ']' [ 248s] + builtin echo Registering accelerated handler [ 248s] Registering accelerated handler [ 248s] + builtin echo -1 [ 248s] + builtin echo ':arm:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x28\x00:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff\xff:/qemu/qemu-arm-binfmt:P' [ 248s] + '[' ']' [ 248s] + builtin echo All done [ 248s] All done [ 248s] + rm -rf /usr/armv7l-tizen-linux-gnueabi/lib [ 248s] + ln -s /lib /usr/armv7l-tizen-linux-gnueabi/usr/lib [ 248s] ln: failed to create symbolic link '/usr/armv7l-tizen-linux-gnueabi/usr/lib/lib': File exists [ 248s] + builtin echo 0 [ 248s] + '[' -f /usr/bin/gcc ']' [ 248s] ++ LANG=C [ 248s] ++ gcc --version [ 248s] ++ head -1 [ 248s] ++ sed -e 's/^.*gcc[^0-9]*\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*$/\1.\2/' [ 248s] + export GCCVER=4.9 [ 248s] + GCCVER=4.9 [ 248s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 248s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbegin.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbegin.o [ 248s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 248s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginS.o [ 248s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 248s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtbeginT.o /usr/armv7l-tizen-linux-gnueabi/bin/crtbeginT.o [ 248s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 248s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtend.o /usr/armv7l-tizen-linux-gnueabi/bin/crtend.o [ 248s] + for f in crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o [ 248s] + ln -s /usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9/crtendS.o /usr/armv7l-tizen-linux-gnueabi/bin/crtendS.o [ 248s] [100/100] installing rpm-build-4.11.0.1-22.1 [ 248s] error: Failed to dlopen /usr/lib/rpm-plugins/msm.so /usr/lib/rpm-plugins/msm.so: cannot open shared object file: No such file or directory [ 248s] removing nis flags from //etc/nsswitch.conf... [ 248s] now finalizing build dir... [ 250s] qemu: Unsupported syscall: 311 [ 258s] build target is armv7l-tizen-linux [ 258s] ----------------------------------------------------------------- [ 258s] I have the following modifications for can-utils.spec: [ 258s] 5c5 [ 258s] < Release: 1 [ 258s] --- [ 258s] > Release: 2.1 [ 258s] 37a38 [ 258s] > %changelog [ 258s] ----------------------------------------------------------------- [ 258s] ----- building can-utils.spec (user abuild) [ 258s] ----------------------------------------------------------------- [ 258s] ----------------------------------------------------------------- [ 258s] qemu: Unsupported syscall: 311 [ 258s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:IVI/arm/c3716b8ed7d2d11ab59c5797c93cf3e0-can-utils' /home/abuild/rpmbuild/SOURCES/can-utils.spec [ 258s] Building target platforms: armv7l-tizen-linux [ 258s] Building for target armv7l-tizen-linux [ 258s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.EPXV8Z [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + rm -rf can-utils-0.1 [ 258s] + /bin/tar -xf - [ 258s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/can-utils-0.1.tar.gz [ 258s] + STATUS=0 [ 258s] + '[' 0 -ne 0 ']' [ 258s] + cd can-utils-0.1 [ 258s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 258s] + echo 'Patch #0 (0001-Initial-packaging.patch):' [ 258s] Patch #0 (0001-Initial-packaging.patch): [ 258s] + /bin/cat /home/abuild/rpmbuild/SOURCES/0001-Initial-packaging.patch [ 258s] + /bin/patch -p1 --fuzz=2 [ 258s] patching file COPYING [ 258s] + cp /home/abuild/rpmbuild/SOURCES/can-utils.manifest . [ 258s] + exit 0 [ 258s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.J8A6LD [ 258s] + umask 022 [ 258s] + cd /home/abuild/rpmbuild/BUILD [ 258s] + cd can-utils-0.1 [ 258s] ++ uname -m [ 258s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 258s] + LANG=C [ 258s] + export LANG [ 258s] + unset DISPLAY [ 258s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 258s] + export CFLAGS [ 258s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 258s] + export CXXFLAGS [ 258s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g -I%_fmoddir' [ 258s] + export FFLAGS [ 258s] + LD_AS_NEEDED=1 [ 258s] + export LD_AS_NEEDED [ 258s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 258s] + export CFLAGS [ 258s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 258s] + export CXXFLAGS [ 258s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g -I%_fmoddir' [ 258s] + export FFLAGS [ 258s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 258s] [ 258s] ---------- [ 258s] autoreconf [ 258s] ---------- [ 258s] [ 273s] configure.ac:22: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. [ 273s] configure.ac:22: You should run autoupdate. [ 273s] aclocal.m4:8126: AC_LIBTOOL_WIN32_DLL is expanded from... [ 273s] configure.ac:22: the top level [ 273s] configure.ac:22: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you [ 273s] configure.ac:22: put the `win32-dll' option into LT_INIT's first parameter. [ 273s] aclocal.m4:8126: AC_LIBTOOL_WIN32_DLL is expanded from... [ 273s] configure.ac:22: the top level [ 273s] configure.ac:24: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 273s] configure.ac:24: You should run autoupdate. [ 273s] aclocal.m4:129: AC_PROG_LIBTOOL is expanded from... [ 273s] configure.ac:24: the top level [ 275s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `config/autoconf'. [ 275s] libtoolize: copying file `config/autoconf/ltmain.sh' [ 276s] libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `config/m4'. [ 276s] libtoolize: copying file `config/m4/libtool.m4' [ 276s] libtoolize: copying file `config/m4/ltoptions.m4' [ 276s] libtoolize: copying file `config/m4/ltsugar.m4' [ 276s] libtoolize: copying file `config/m4/ltversion.m4' [ 277s] libtoolize: copying file `config/m4/lt~obsolete.m4' [ 277s] libtoolize: Consider adding `-I config/m4' to ACLOCAL_AMFLAGS in Makefile.am. [ 287s] configure.ac:22: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. [ 287s] configure.ac:22: You should run autoupdate. [ 287s] config/m4/ltoptions.m4:146: AC_LIBTOOL_WIN32_DLL is expanded from... [ 287s] configure.ac:22: the top level [ 287s] configure.ac:22: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you [ 287s] configure.ac:22: put the `win32-dll' option into LT_INIT's first parameter. [ 287s] config/m4/ltoptions.m4:146: AC_LIBTOOL_WIN32_DLL is expanded from... [ 287s] configure.ac:22: the top level [ 287s] configure.ac:24: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 287s] configure.ac:24: You should run autoupdate. [ 287s] config/m4/libtool.m4:107: AC_PROG_LIBTOOL is expanded from... [ 287s] configure.ac:24: the top level [ 294s] configure.ac:19: installing 'config/autoconf/compile' [ 295s] configure.ac:9: installing 'config/autoconf/config.guess' [ 295s] configure.ac:9: installing 'config/autoconf/config.sub' [ 295s] configure.ac:28: installing 'config/autoconf/install-sh' [ 295s] configure.ac:28: installing 'config/autoconf/missing' [ 295s] GNUmakefile.am: installing 'config/autoconf/depcomp' [ 296s] [ 296s] -------- [ 296s] Finished [ 296s] -------- [ 296s] [ 296s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 296s] + export CFLAGS [ 296s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g' [ 296s] + export CXXFLAGS [ 296s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=vfpv3 -mfloat-abi=softfp -Wp,-D__SOFTFP__ -fmessage-length=0 -g -I%_fmoddir' [ 296s] + export FFLAGS [ 296s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 298s] checking build system type... armv7l-tizen-linux-gnueabi [ 299s] checking host system type... armv7l-tizen-linux-gnueabi [ 299s] checking for armv7l-tizen-linux-gnueabi-gcc... no [ 299s] checking for gcc... gcc [ 301s] checking whether the C compiler works... yes [ 301s] checking for C compiler default output file name... a.out [ 301s] checking for suffix of executables... [ 301s] checking whether we are cross compiling... no [ 301s] checking for suffix of object files... o [ 301s] checking whether we are using the GNU C compiler... yes [ 301s] checking whether gcc accepts -g... yes [ 301s] checking for gcc option to accept ISO C89... none needed [ 301s] checking whether gcc understands -c and -o together... yes [ 301s] checking how to print strings... printf [ 301s] checking for a sed that does not truncate output... /bin/sed [ 301s] checking for grep that handles long lines and -e... /bin/grep [ 301s] checking for egrep... /bin/grep -E [ 301s] checking for fgrep... /bin/grep -F [ 301s] checking for ld used by gcc... /emul/i586-for-arm/usr/armv7l-tizen-linux-gnueabi/bin/ld [ 301s] checking if the linker (/emul/i586-for-arm/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 301s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 302s] checking the name lister (/bin/nm -B) interface... BSD nm [ 302s] checking whether ln -s works... yes [ 302s] checking the maximum length of command line arguments... 1572864 [ 302s] checking whether the shell understands some XSI constructs... yes [ 302s] checking whether the shell understands "+="... yes [ 302s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 302s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 302s] checking for /emul/i586-for-arm/usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 302s] checking for armv7l-tizen-linux-gnueabi-objdump... objdump [ 302s] checking how to recognize dependent libraries... pass_all [ 302s] checking for armv7l-tizen-linux-gnueabi-dlltool... dlltool [ 302s] checking how to associate runtime and link libraries... printf %s\n [ 302s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 302s] checking for ar... ar [ 302s] checking for archiver @FILE support... @ [ 302s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 302s] checking for strip... strip [ 302s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 302s] checking for ranlib... ranlib [ 302s] checking for gawk... gawk [ 302s] checking command to parse /bin/nm -B output from gcc object... ok [ 302s] checking for sysroot... no [ 302s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 302s] checking for mt... no [ 302s] checking if : is a manifest tool... no [ 302s] checking how to run the C preprocessor... gcc -E [ 303s] checking for ANSI C header files... yes [ 303s] checking for sys/types.h... yes [ 303s] checking for sys/stat.h... yes [ 303s] checking for stdlib.h... yes [ 303s] checking for string.h... yes [ 303s] checking for memory.h... yes [ 303s] checking for strings.h... yes [ 303s] checking for inttypes.h... yes [ 303s] checking for stdint.h... yes [ 303s] checking for unistd.h... yes [ 303s] checking for dlfcn.h... yes [ 304s] checking for objdir... .libs [ 304s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 304s] checking for gcc option to produce PIC... -fPIC -DPIC [ 304s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 304s] checking if gcc static flag -static works... no [ 304s] checking if gcc supports -c -o file.o... yes [ 304s] checking if gcc supports -c -o file.o... (cached) yes [ 304s] checking whether the gcc linker (/emul/i586-for-arm/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 304s] checking whether -lc should be explicitly linked in... no [ 305s] checking dynamic linker characteristics... GNU/Linux ld.so [ 305s] checking how to hardcode library paths into programs... immediate [ 305s] checking whether stripping libraries is possible... yes [ 305s] checking if libtool supports shared libraries... yes [ 305s] checking whether to build shared libraries... yes [ 305s] checking whether to build static libraries... yes [ 305s] checking for a BSD-compatible install... /bin/install -c [ 305s] checking whether build environment is sane... yes [ 305s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 305s] checking whether make sets $(MAKE)... yes [ 305s] checking for style of include used by make... GNU [ 305s] checking whether make supports nested variables... yes [ 305s] checking dependency style of gcc... gcc3 [ 305s] checking whether make supports nested variables... (cached) yes [ 305s] checking fcntl.h usability... yes [ 305s] checking fcntl.h presence... yes [ 305s] checking for fcntl.h... yes [ 305s] checking limits.h usability... yes [ 305s] checking limits.h presence... yes [ 305s] checking for limits.h... yes [ 305s] checking locale.h usability... yes [ 305s] checking locale.h presence... yes [ 305s] checking for locale.h... yes [ 305s] checking for stdint.h... (cached) yes [ 305s] checking for stdlib.h... (cached) yes [ 305s] checking for string.h... (cached) yes [ 306s] checking syslog.h usability... yes [ 306s] checking syslog.h presence... yes [ 306s] checking for syslog.h... yes [ 306s] checking termios.h usability... yes [ 306s] checking termios.h presence... yes [ 306s] checking for termios.h... yes [ 306s] checking for unistd.h... (cached) yes [ 306s] checking netinet/in.h usability... yes [ 306s] checking netinet/in.h presence... yes [ 306s] checking for netinet/in.h... yes [ 306s] checking sys/ioctl.h usability... yes [ 306s] checking sys/ioctl.h presence... yes [ 306s] checking for sys/ioctl.h... yes [ 306s] checking sys/socket.h usability... yes [ 306s] checking sys/socket.h presence... yes [ 306s] checking for sys/socket.h... yes [ 306s] checking sys/time.h usability... yes [ 306s] checking sys/time.h presence... yes [ 306s] checking for sys/time.h... yes [ 306s] checking for inline... inline [ 306s] checking for special C compiler options needed for large files... no [ 306s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 307s] checking for off_t... yes [ 307s] checking for pid_t... yes [ 307s] checking for uint64_t... yes [ 307s] checking vfork.h usability... no [ 307s] checking vfork.h presence... no [ 307s] checking for vfork.h... no [ 307s] checking for fork... yes [ 307s] checking for vfork... yes [ 307s] checking for working fork... yes [ 307s] checking for working vfork... (cached) yes [ 307s] checking whether time.h and sys/time.h may both be included... yes [ 307s] checking for sys/time.h... (cached) yes [ 307s] checking for unistd.h... (cached) yes [ 307s] checking for alarm... yes [ 308s] checking for working mktime... yes [ 308s] checking for alarm... (cached) yes [ 308s] checking for gettimeofday... yes [ 308s] checking for localtime_r... yes [ 309s] checking for memset... yes [ 310s] checking for select... yes [ 310s] checking for setlocale... yes [ 310s] checking for socket... yes [ 310s] checking for strchr... yes [ 310s] checking for strerror... yes [ 311s] checking for strstr... yes [ 311s] checking for strtoul... yes [ 311s] checking whether SO_RXQ_OVFL is declared... no [ 311s] checking whether PF_CAN is declared... no [ 311s] checking whether AF_CAN is declared... no [ 311s] checking whether to enable debugging... no [ 311s] checking that generated files are newer than configure... done [ 311s] configure: creating ./config.status [ 314s] config.status: creating GNUmakefile [ 314s] config.status: executing libtool commands [ 314s] config.status: executing depfiles commands [ 315s] + make -j6 [ 315s] CC lib.lo [ 315s] CC bcmserver.o [ 315s] CC canframelen.lo [ 315s] CC asc2log.o [ 315s] CC can-calc-bit-timing.o [ 315s] CC canbusload.o [ 315s] CC candump.o [ 315s] CC canfdtest.o [ 315s] CC cangen.o [ 315s] CC cangw.o [ 315s] candump.c: In function 'main': [ 315s] candump.c:669:21: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] tv = *(struct timeval *)CMSG_DATA(cmsg); [ 315s] ^ [ 315s] candump.c:671:7: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] dropcnt[i] = *(__u32 *)CMSG_DATA(cmsg); [ 315s] ^ [ 315s] cangen.c: In function 'main': [ 315s] cangen.c:393:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] *(unsigned long*)(&frame.data[0]) = random(); [ 315s] ^ [ 315s] cangen.c:394:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] *(unsigned long*)(&frame.data[4]) = random(); [ 315s] ^ [ 315s] CC canlogserver.o [ 315s] CC canplayer.o [ 315s] CC cansend.o [ 315s] CC cansniffer.o [ 315s] cansniffer.c: In function 'rx_setup': [ 315s] cansniffer.c:373:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&txmsg.frame) = (__u64) 0xFFFFFFFFFFFFFFFFULL; [ 315s] ^ [ 315s] cansniffer.c: In function 'handle_keyb': [ 315s] cansniffer.c:481:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[i].notch) = (__u64) 0; [ 315s] ^ [ 315s] cansniffer.c: In function 'handle_bcm': [ 315s] cansniffer.c:521:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[id].marker) |= [ 315s] ^ [ 315s] cansniffer.c:522:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[id].current) ^ U64_DATA(&sniftab[id].last); [ 315s] ^ [ 315s] cansniffer.c:522:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] cansniffer.c: In function 'handle_timeo': [ 315s] cansniffer.c:551:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[i].notch) |= U64_DATA(&sniftab[i].marker); [ 315s] ^ [ 315s] cansniffer.c:551:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] cansniffer.c:572:9: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[i].marker) = (__u64) 0; [ 315s] ^ [ 315s] cansniffer.c: In function 'print_snifline': [ 315s] cansniffer.c:673:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 315s] U64_DATA(&sniftab[id].marker) = (__u64) 0; [ 315s] ^ [ 315s] cansniffer.c: In function 'writesettings': [ 315s] cansniffer.c:692:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 315s] write(fd, buf, 7); [ 315s] ^ [ 315s] cansniffer.c:695:5: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 315s] write(fd, buf, 2); [ 315s] ^ [ 315s] cansniffer.c:697:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 315s] write(fd, "\n", 1); [ 315s] ^ [ 315s] CC isotpdump.o [ 316s] CC isotprecv.o [ 316s] CC isotpsend.o [ 316s] isotpdump.c: In function 'main': [ 316s] isotpdump.c:223:4: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Wformat=] [ 316s] fprintf(stderr, "read: incomplete CAN frame %lu %d\n", sizeof(frame), nbytes); [ 316s] ^ [ 316s] CC isotpserver.o [ 316s] CC isotpsniffer.o [ 316s] CC isotptun.o [ 316s] CC log2asc.o [ 316s] CC log2long.o [ 316s] CC slcan_attach.o [ 316s] CC slcanpty.o [ 316s] CC slcand.o [ 316s] slcan_attach.c: In function 'main': [ 316s] slcan_attach.c:158:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcan_attach.c:163:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcan_attach.c:168:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcan_attach.c:173:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcan_attach.c:227:4: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcanpty.c: In function 'pty2can': [ 316s] slcanpty.c:242:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] [ 316s] *(unsigned long long *) (&frame.data) = 0ULL; /* clear data[] */ [ 316s] ^ [ 316s] slcand.c: In function 'main': [ 316s] slcand.c:318:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcand.c:323:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcand.c:328:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcand.c:333:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] slcand.c:386:3: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result] [ 316s] write(fd, buf, strlen(buf)); [ 316s] ^ [ 316s] CCLD libcan.la [ 317s] CCLD candump [ 317s] CCLD canbusload [ 317s] CCLD can-calc-bit-timing [ 317s] CCLD canfdtest [ 317s] CCLD bcmserver [ 317s] CCLD asc2log [ 318s] CCLD cangen [ 318s] CCLD cangw [ 318s] CCLD canlogserver [ 318s] CCLD canplayer [ 318s] CCLD cansend [ 318s] CCLD cansniffer [ 319s] CCLD isotpdump [ 319s] CCLD isotprecv [ 319s] CCLD isotpsend [ 319s] CCLD isotpserver [ 319s] CCLD isotpsniffer [ 319s] CCLD isotptun [ 320s] CCLD log2asc [ 320s] CCLD slcan_attach [ 320s] CCLD log2long [ 320s] CCLD slcand [ 320s] CCLD slcanpty [ 321s] + exit 0 [ 321s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.aoNiK6 [ 321s] + umask 022 [ 321s] + cd /home/abuild/rpmbuild/BUILD [ 321s] + cd can-utils-0.1 [ 321s] + LANG=C [ 321s] + export LANG [ 321s] + unset DISPLAY [ 321s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm [ 321s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm [ 321s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm install [ 321s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/can-utils-0.1' [ 321s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin' [ 321s] /bin/sh ./libtool --mode=install /bin/install -c asc2log bcmserver can-calc-bit-timing canbusload candump canfdtest cangen cangw canlogserver canplayer cansend cansniffer isotpdump isotprecv isotpsend isotpserver isotpsniffer isotptun log2asc log2long slcan_attach slcand slcanpty '/home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin' [ 322s] libtool: install: /bin/install -c asc2log /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/asc2log [ 322s] libtool: install: /bin/install -c bcmserver /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/bcmserver [ 322s] libtool: install: /bin/install -c can-calc-bit-timing /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/can-calc-bit-timing [ 322s] libtool: install: /bin/install -c canbusload /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canbusload [ 322s] libtool: install: /bin/install -c candump /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/candump [ 322s] libtool: install: /bin/install -c canfdtest /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canfdtest [ 322s] libtool: install: /bin/install -c cangen /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cangen [ 322s] libtool: install: /bin/install -c cangw /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cangw [ 322s] libtool: install: /bin/install -c canlogserver /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canlogserver [ 322s] libtool: install: /bin/install -c canplayer /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canplayer [ 322s] libtool: install: /bin/install -c cansend /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cansend [ 322s] libtool: install: /bin/install -c cansniffer /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cansniffer [ 322s] libtool: install: /bin/install -c isotpdump /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpdump [ 322s] libtool: install: /bin/install -c isotprecv /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotprecv [ 322s] libtool: install: /bin/install -c isotpsend /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpsend [ 322s] libtool: install: /bin/install -c isotpserver /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpserver [ 322s] libtool: install: /bin/install -c isotpsniffer /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpsniffer [ 322s] libtool: install: /bin/install -c isotptun /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotptun [ 322s] libtool: install: /bin/install -c log2asc /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/log2asc [ 322s] libtool: install: /bin/install -c log2long /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/log2long [ 322s] libtool: install: /bin/install -c slcan_attach /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcan_attach [ 322s] libtool: install: /bin/install -c slcand /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcand [ 322s] libtool: install: /bin/install -c slcanpty /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcanpty [ 322s] make[1]: Nothing to be done for 'install-data-am'. [ 322s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/can-utils-0.1' [ 322s] + rm -f /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/share/info/dir [ 322s] + xargs rm -f -- [ 322s] + find /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm -regex '.*\.la$' [ 322s] + xargs rm -f -- [ 322s] + find /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm -regex '.*\.a$' [ 322s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/can-utils-0.1 [ 322s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/asc2log [ 323s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/bcmserver [ 323s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/can-calc-bit-timing [ 323s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canbusload [ 324s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/candump [ 324s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canfdtest [ 324s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cangen [ 324s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cangw [ 325s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canlogserver [ 325s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/canplayer [ 325s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cansend [ 325s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/cansniffer [ 326s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpdump [ 326s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotprecv [ 326s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpsend [ 326s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpserver [ 327s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotpsniffer [ 327s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/isotptun [ 327s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/log2asc [ 327s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/log2long [ 327s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcan_attach [ 328s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcand [ 328s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/bin/slcanpty [ 328s] cpio: gcc-4.9.2/libgcc/config/arm/bpabi.S: Cannot stat: No such file or directory [ 328s] cpio: gcc-4.9.2/libgcc/config/arm/bpabi.c: Cannot stat: No such file or directory [ 328s] cpio: gcc-4.9.2/libgcc/config/arm/lib1funcs.S: Cannot stat: No such file or directory [ 328s] cpio: gcc-4.9.2/libgcc/libgcc2.c: Cannot stat: No such file or directory [ 328s] cpio: gcc-4.9.2/libgcc/libgcc2.h: Cannot stat: No such file or directory [ 328s] cpio: gcc-4.9.2/obj-armv7l-tizen-linux-gnueabi/armv7l-tizen-linux-gnueabi/libgcc: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/csu/elf-init.c: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 328s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 328s] 609 blocks [ 328s] + /usr/lib/rpm/brp-compress [ 328s] + /usr/lib/rpm/brp-tizen [ 328s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm [ 329s] Processing files: can-utils-0.1-2.1.armv7l [ 329s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 329s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 329s] [ 329s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.w0uCw1 [ 329s] + umask 022 [ 329s] + cd /home/abuild/rpmbuild/BUILD [ 329s] + cd can-utils-0.1 [ 329s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/share/licenses/can-utils [ 329s] + export LICENSEDIR [ 329s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/share/licenses/can-utils [ 329s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm/usr/share/licenses/can-utils [ 329s] + exit 0 [ 330s] Provides: can-utils = 0.1-2.1 can-utils(armv7l-32) = 0.1-2.1 [ 330s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 330s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) [ 330s] Processing files: can-utils-debugsource-0.1-2.1.armv7l [ 330s] Provides: can-utils-debugsource = 0.1-2.1 can-utils-debugsource(armv7l-32) = 0.1-2.1 [ 330s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 330s] Processing files: can-utils-debuginfo-0.1-2.1.armv7l [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 330s] warning: File listed twice: /usr/lib/debug/.build-id [ 333s] Provides: debuginfo(build-id) = 025b2aef4e9009a6c91bb1f352ad2b8927d83f77 debuginfo(build-id) = 0514786ffe81d6768e268b28bd00dc90677dd7d8 debuginfo(build-id) = 1ce9c9f3ff8f8d6c6676992abf6d676780d5c91e debuginfo(build-id) = 1de26b056fd5226aab916d3d2ad1d1bfcd4adc01 debuginfo(build-id) = 2b1a717c06f1396dd9f615dfb5f0e86c6f662fb2 debuginfo(build-id) = 311be68f3a9773666d0823e3881f44cc62752408 debuginfo(build-id) = 366dae080cdf85741a37ffc04019dcf7b7b9ccc3 debuginfo(build-id) = 3f8da3de3f78fbb38d84950e1a2e72fafd83e729 debuginfo(build-id) = 49287abcf50a5d870aeee493ed423ceb784bb689 debuginfo(build-id) = 59390933e6bc30b54fa619abfa7a5eb92f802e6d debuginfo(build-id) = 5c36dfa53c7d0b2710cbe715e4fcdfd66f4ef0f9 debuginfo(build-id) = 5f6b707e8dda8fc77af859dd8b108ba14ee23a3e debuginfo(build-id) = 729c3f29828e049a8dc22cdfd35002c253a87df4 debuginfo(build-id) = 7b141af9a1e1756b7c433046ec7f694f689995ca debuginfo(build-id) = 8a432f74cc1603dbe70bcc0c5347aef42941567a debuginfo(build-id) = 8e2c8d81c9256d524e1c9360232a8dd246414c6a debuginfo(build-id) = 93827295b80132eaa64fbd37b84640090d05b61e debuginfo(build-id) = af1ab732e85c4013af7ce323956ea5f05ad158dd debuginfo(build-id) = b6d58ed6164f00e7ba57507886052a6097727022 debuginfo(build-id) = c60fef4d5b81306a9071ed296dda511009334a1d debuginfo(build-id) = ca2e1b2d26d510cc21fd20b028f07e4880af7fdb debuginfo(build-id) = d579979cbc7aa2402aef7b26dc3e3b22125bd683 debuginfo(build-id) = e4f1d7c3aaf5ff509b5505ce23405f244b83cc80 [ 333s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 333s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm [ 333s] warning: Could not canonicalize hostname: w17 [ 333s] Wrote: /home/abuild/rpmbuild/SRPMS/can-utils-0.1-2.1.src.rpm [ 333s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/can-utils-0.1-2.1.armv7l.rpm [ 333s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/can-utils-debugsource-0.1-2.1.armv7l.rpm [ 333s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/can-utils-debuginfo-0.1-2.1.armv7l.rpm [ 333s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.fDl9yZ [ 333s] + umask 022 [ 333s] + cd /home/abuild/rpmbuild/BUILD [ 333s] + cd can-utils-0.1 [ 333s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/can-utils-0.1-2.1.arm [ 333s] + exit 0 [ 334s] ... checking for files with abuild user/group [ 334s] [ 334s] RPMLINT report: [ 334s] =============== [ 334s] qemu: Unsupported syscall: 311 [ 345s] can-utils.armv7l: E: non-standard-group (Badness: 200) Automotive/Hardware Adaption [ 345s] can-utils.src: E: non-standard-group (Badness: 200) Automotive/Hardware Adaption [ 345s] The value of the Group tag in the package is not valid. Valid groups are [ 345s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 345s] [ 345s] 2 packages and 0 specfiles checked; 2 errors, 0 warnings. [ 345s] [ 345s] ... creating baselibs [ 345s] qemu: Unsupported syscall: 311 [ 345s] ... comparing built packages with the former built [ 346s] /usr/lib/build/rpm-check.sh [ 346s] compare /.build.oldpackages/can-utils-0.1-1.5.src.rpm /home/abuild/rpmbuild/SRPMS/can-utils-0.1-2.1.src.rpm [ 346s] comparing rpmtags [ 346s] --- /tmp/tmp.OIr1LntfXK 2015-01-19 22:57:06.000000000 +0000 [ 346s] +++ /tmp/tmp.6G5SLvxZD3 2015-01-19 22:57:06.000000000 +0000 [ 346s] @@ -1,7 +1,7 @@ [ 346s] can-utils 0.1 (none) [ 346s] CAN userspace utilities and tools [ 346s] CAN (controller area network) bus userspace utilities and tools. [ 346s] - tizen Tizen:IVI / arm obs://build.tizen.org/Tizen:IVI/arm/4c05917c73fbbcc03cf8e014deeabf2a-can-utils (GPL-2.0 or BSD-3-Clause) and GPL-2.0+ (GPL-2.0 or BSD-3-Clause) and GPL-2.0+ [ 346s] + tizen Tizen:3.0:IVI / arm obs://build.tizen.org/Tizen:3.0:IVI/arm/c3716b8ed7d2d11ab59c5797c93cf3e0-can-utils (GPL-2.0 or BSD-3-Clause) and GPL-2.0+ (GPL-2.0 or BSD-3-Clause) and GPL-2.0+ [ 346s] Automotive/Hardware Adaption https://gitorious.org/linux-can/can-utils/ (none) (none) (none) [ 346s] (none) 4.11.0.1 (none) [ 346s] cpio gzip 9 [ 346s] RPM meta information is different [ 346s] ... saving built statistics [ 346s] ... saving built packages [ 346s] /home/abuild/rpmbuild/RPMS/armv7l/can-utils-0.1-2.1.armv7l.rpm [ 346s] /home/abuild/rpmbuild/RPMS/armv7l/can-utils-debuginfo-0.1-2.1.armv7l.rpm [ 346s] /home/abuild/rpmbuild/RPMS/armv7l/can-utils-debugsource-0.1-2.1.armv7l.rpm [ 346s] /home/abuild/rpmbuild/SRPMS/can-utils-0.1-2.1.src.rpm [ 347s] /home/abuild/rpmbuild/OTHER/_statistics [ 347s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 347s] [ 347s] w17 finished "build can-utils.spec" at Mon Jan 19 22:57:06 UTC 2015. [ 347s] [ 350s] [ 330.006463] SysRq : Power Off [ 350s] [ 330.122131] Power down. [ 350s] build: extracting built packages... [ 350s] can-utils-0.1-2.1.armv7l.rpm [ 350s] can-utils-debuginfo-0.1-2.1.armv7l.rpm [ 350s] can-utils-debugsource-0.1-2.1.armv7l.rpm [ 350s] can-utils-0.1-2.1.src.rpm [ 350s] _statistics [ 350s] rpmlint.log Retried build at Fri Jan 23 11:11:13 2015 returned same result, skipped