[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w18 started "build _service:gbs:capi-network-serial.spec" at Mon Jan 19 15:08:38 UTC 2015. [ 0s] [ 0s] Building serial for project 'Tizen:3.0:IVI' repository 'emulator' arch 'i586' srcmd5 '25a0429a6f8c07cb9704626bdc71cb21' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-serial.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 0s] [7/35] preinstalling grep... [ 0s] [8/35] preinstalling libattr... [ 0s] [9/35] preinstalling libbz2... [ 1s] [10/35] preinstalling libcap... [ 1s] [11/35] preinstalling libelf... [ 1s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc_s1... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling tar... [ 1s] [23/35] preinstalling zlib... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling util-linux... [ 1s] [31/35] preinstalling coreutils... [ 1s] [32/35] preinstalling nss... [ 1s] [33/35] preinstalling libsoftokn3... [ 1s] [34/35] preinstalling rpm... [ 1s] [35/35] preinstalling rpm-security-plugin... [ 1s] [ 2s] [1/8] preinstalling libext2fs... [ 2s] [2/8] preinstalling libpcre... [ 2s] [3/8] preinstalling libuuid... [ 2s] [4/8] preinstalling perl... [ 2s] [5/8] preinstalling grep... [ 2s] [6/8] preinstalling libblkid... [ 2s] [7/8] preinstalling libmount... [ 2s] [8/8] preinstalling util-linux... [ 2s] copying packages... [ 3s] reordering...cycle: gcc49-locale -> gcc49 [ 3s] breaking dependency gcc49 -> gcc49-locale [ 3s] cycle: coreutils -> pam [ 3s] breaking dependency pam -> coreutils [ 3s] cycle: gio-branding-upstream -> libgio [ 3s] breaking dependency libgio -> gio-branding-upstream [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 8192 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 4 [ 8s] [ 0.000000] tsc: Fast TSC calibration failed [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 9s] Waiting for device /dev/vda to appear: ok [ 9s] fsck from util-linux 2.21.2 [ 9s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 9s] /dev/vda: clean, 4508/2392064 files, 191669/9568256 blocks [ 9s] fsck succeeded. Mounting root device read-write. [ 9s] Mounting root /dev/vda [ 9s] mount -o rw -t ext4 /dev/vda /root [ 11s] replacing /etc/mtab with symlink to /proc/self/mounts [ 11s] 2nd stage started in virtual machine [ 11s] machine type: x86_64 [ 11s] switching personality to 8... [ 11s] 2nd stage started in virtual machine [ 11s] machine type: i686 [ 11s] swapon /dev/vdb [ 11s] swapon: /dev/vdb: found swap signature: version 1, page-size 4, same byte order [ 11s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 11s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:capi-network-serial.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:capi-network-serial.spec build rpmlint-Factory ... [ 11s] running setup postinstall script [ 11s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 11s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 11s] initializing rpm db... [ 11s] [1/137] installing libmagic-data-5.18-13.1 [ 11s] [2/137] installing libstdc++-locale-4.9.2-5.4 [ 11s] [3/137] installing setup-0.9-8.1 [ 11s] [4/137] installing terminfo-base-5.9-8.1 [ 12s] [5/137] installing tizen-platform-config-2.0-11.1 [ 12s] [6/137] installing filesystem-3.1-11.1 [ 12s] error: Failed to set SMACK64 _ for /proc: Operation not supported [ 12s] [7/137] installing glibc-2.20-11.5 [ 12s] [8/137] installing bash-4.3.30-8.2 [ 12s] [9/137] installing capi-base-common-0.1.6-8.1 [ 12s] [10/137] installing cpio-2.11-6.1 [ 12s] [11/137] installing diffutils-3.3-6.1 [ 12s] [12/137] installing findutils-4.5.14-10.1 [ 12s] [13/137] installing gawk-4.1.1-7.2 [ 12s] [14/137] installing hostname-3.12-5.1 [ 12s] [15/137] installing libatomic-4.9.2-5.4 [ 12s] [16/137] installing libattr-2.4.47-9.1 [ 12s] [17/137] installing libbz2-1.0.6-8.3 [ 12s] [18/137] installing libcap-2.24-9.3 [ 12s] [19/137] installing libcares-1.10.0-7.1 [ 12s] [20/137] installing libdbus-1.8.2-12.1 [ 13s] [21/137] installing libelf-0.160-7.2 [ 13s] [22/137] installing libelf0-0.8.13-5.1 [ 13s] [23/137] installing libexpat-2.1.0-8.1 [ 13s] [24/137] installing libext2fs-1.42.11-9.1 [ 13s] [25/137] installing libffi-3.1-6.1 [ 13s] [26/137] installing libfreebl3-3.17.1-9.5 [ 13s] [27/137] installing libgcc_s1-4.9.2-5.4 [ 13s] [28/137] installing libgdbm-1.11-9.1 [ 13s] [29/137] installing libgmp-6.0.0-8.1 [ 13s] [30/137] installing libgomp-4.9.2-5.4 [ 13s] [31/137] installing libgpg-error-1.13-7.1 [ 13s] [32/137] installing libitm-4.9.2-5.4 [ 13s] [33/137] installing libltdl-2.4.2-7.1 [ 13s] [34/137] installing liblua-5.1.4-6.1 [ 13s] [35/137] installing liblzma-5.1.3-8.1 [ 13s] [36/137] installing libpcre-8.31-5.1 [ 13s] [37/137] installing libpopt-1.16-8.1 [ 13s] [38/137] installing libpython-2.7.8-6.2 [ 13s] [39/137] installing libsmack-1.0.5-9.1 [ 14s] [40/137] installing libsqlite-3.7.14-11.1 [ 14s] [41/137] installing libuuid-2.24.2-8.2 [ 14s] [42/137] installing m4-1.4.17-6.1 [ 14s] [43/137] installing net-tools-2.0_20121208git-7.1 [ 14s] [44/137] installing nspr-4.10.7-10.1 [ 14s] [45/137] installing patch-2.7-7.1 [ 14s] [46/137] installing pkg-config-0.28-7.1 [ 14s] [47/137] installing sed-4.2.2-7.1 [ 14s] [48/137] installing tar-1.27-6.1 [ 14s] [49/137] installing update-alternatives-1.16.3-6.1 [ 14s] [50/137] installing which-2.20-5.1 [ 14s] [51/137] installing zlib-1.2.8-8.1 [ 14s] [52/137] installing libncurses-5.9-8.1 [ 14s] [53/137] installing libtzplatform-config-2.0-11.1 [ 14s] [54/137] installing build-compare-2014.11.25-7.2 [ 14s] [55/137] installing gcc49-info-4.9.2-5.4 [ 14s] [56/137] installing capi-base-common-devel-0.1.6-8.1 [ 15s] [57/137] installing dbus-devel-1.8.2-12.1 [ 15s] [58/137] installing grep-2.16-7.1 [ 15s] [59/137] installing less-466-7.1 [ 15s] [60/137] installing libacl-2.2.52-10.1 [ 15s] [61/137] installing libasm-0.160-7.2 [ 15s] [62/137] installing libblkid-2.24.2-8.2 [ 15s] [63/137] installing libgcrypt-1.6.2-7.1 [ 15s] [64/137] installing libglib-2.43.1-9.1 [ 15s] [65/137] installing libidn-1.25-6.1 [ 15s] [66/137] installing libmpfr-3.1.2-8.1 [ 15s] [67/137] installing libopenssl-1.0.1j-9.1 [ 15s] [68/137] installing libpcreposix-8.31-5.1 [ 15s] [69/137] installing libreadline-5.2-8.1 [ 15s] [70/137] installing make-4.0-6.1 [ 16s] [71/137] installing nss-certs-3.17.1-9.5 [ 16s] [72/137] installing smack-1.0.5-9.1 [ 16s] [73/137] installing bzip2-1.0.6-8.3 [ 16s] [74/137] installing libmagic-5.18-13.1 [ 16s] [75/137] installing libstdc++-4.9.2-5.4 [ 16s] [76/137] installing libxml2-2.8.0-8.1 [ 16s] [77/137] installing xz-5.1.3-8.1 [ 16s] [78/137] installing binutils-2.24.90-9.2 [ 20s] update-alternatives: using /usr/bin/ld.bfd to provide /usr/bin/ld (ld) in auto mode. [ 20s] [79/137] installing libdw-0.160-7.2 [ 21s] [80/137] installing file-5.18-13.1 [ 21s] [81/137] installing db4-4.8.30.NC-11.1 [ 21s] [82/137] installing libasan-4.9.2-5.4 [ 21s] [83/137] installing libcilkrts-4.9.2-5.4 [ 21s] [84/137] installing libgmodule-2.43.1-9.1 [ 21s] [85/137] installing libgthread-2.43.1-9.1 [ 21s] [86/137] installing libmount-2.24.2-8.2 [ 21s] [87/137] installing libmpc-1.0-5.1 [ 21s] [88/137] installing libubsan-4.9.2-5.4 [ 22s] [89/137] installing libgobject-2.43.1-9.1 [ 22s] [90/137] installing libpcrecpp-8.31-5.1 [ 22s] [91/137] installing libcurl-7.37.1-7.1 [ 22s] [92/137] installing elfutils-0.160-7.2 [ 22s] [93/137] installing libarchive-3.1.2-6.1 [ 23s] [94/137] installing cpp49-4.9.2-5.4 [ 26s] [95/137] installing perl-5.20.0-9.3 [ 50s] [96/137] installing cmake-2.8.12.2-7.1 [ 58s] [97/137] installing python-2.7.8-6.2 [ 66s] [98/137] installing build-mkbaselibs-20120927-8.1 [ 66s] [99/137] installing cpp-4.9-8.1 [ 66s] [100/137] installing autoconf-2.69-8.1 [ 67s] [101/137] installing python-xml-2.7.8-6.2 [ 67s] [102/137] installing build-20120927-8.1 [ 67s] [103/137] installing pam-1.1.6-11.1 [ 68s] [104/137] installing nss-3.17.1-9.5 [ 68s] [105/137] installing libsoftokn3-3.17.1-9.5 [ 68s] [106/137] installing libsystemd-216-12.1 [ 69s] [107/137] installing coreutils-8.21-8.2 [ 72s] [108/137] installing util-linux-2.24.2-8.2 [ 79s] [109/137] installing rpm-4.11.0.1-22.1 [ 82s] [110/137] installing linux-glibc-devel-3.10-6.1 [ 89s] [111/137] installing glibc-locale-2.20-11.5 [ 93s] [112/137] installing gzip-1.6-8.1 [ 95s] [113/137] installing libdlog-0.4.1-10.1 [ 95s] [114/137] installing automake-1.14.1-9.1 [ 96s] [115/137] installing tzdata-2014h-7.1 [ 98s] [116/137] installing shared-mime-info-1.3-7.1 [ 99s] [117/137] installing rpmlint-mini-1.5-7.1 [ 100s] [118/137] installing rpm-security-plugin-4.11.0.1-22.1 [ 100s] warning: /etc/device-sec-policy created as /etc/device-sec-policy.rpmnew [ 100s] [119/137] installing rpmlint-tizen-1.0-6.1 [ 100s] [120/137] installing glibc-devel-2.20-11.5 [ 102s] [121/137] installing libdlog-devel-0.4.1-10.1 [ 102s] [122/137] installing libtool-2.4.2-7.1 [ 102s] [123/137] installing libgio-2.43.1-9.1 [ 103s] [124/137] installing gio-branding-upstream-2.43.1-9.1 [ 103s] [125/137] installing libstdc++49-devel-4.9.2-5.4 [ 108s] [126/137] installing dbus-glib-0.100.2-6.1 [ 109s] [127/137] installing glib2-tools-2.43.1-9.1 [ 110s] [128/137] installing gcc49-4.9.2-5.4 [ 113s] [129/137] installing gcc49-locale-4.9.2-5.4 [ 114s] [130/137] installing libstdc++-devel-4.9-8.1 [ 114s] [131/137] installing gcc-4.9-8.1 [ 114s] [132/137] installing gcc49-c++-4.9.2-5.4 [ 115s] [133/137] installing gcc-c++-4.9-8.1 [ 115s] [134/137] installing pcre-devel-8.31-5.1 [ 116s] [135/137] installing rpm-build-4.11.0.1-22.1 [ 116s] [136/137] installing glib2-devel-2.43.1-9.1 [ 118s] [137/137] installing dbus-glib-devel-0.100.2-6.1 [ 118s] removing nis flags from //etc/nsswitch.conf... [ 118s] now finalizing build dir... [ 121s] build target is i686-tizen-linux [ 121s] ----------------------------------------------------------------- [ 121s] I have the following modifications for capi-network-serial.spec: [ 121s] 5c5 [ 121s] < Release: 0 [ 121s] --- [ 121s] > Release: 6.1 [ 121s] 59a60 [ 121s] > %changelog [ 121s] ----------------------------------------------------------------- [ 121s] ----- building capi-network-serial.spec (user abuild) [ 121s] ----------------------------------------------------------------- [ 121s] ----------------------------------------------------------------- [ 121s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:3.0:IVI/emulator/25a0429a6f8c07cb9704626bdc71cb21-serial' /home/abuild/rpmbuild/SOURCES/capi-network-serial.spec [ 121s] Building target platforms: i686-tizen-linux [ 121s] Building for target i686-tizen-linux [ 121s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.SpebdY [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + rm -rf capi-network-serial-0.0.7 [ 121s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/capi-network-serial-0.0.7.tar.gz [ 121s] + /bin/tar -xf - [ 121s] + STATUS=0 [ 121s] + '[' 0 -ne 0 ']' [ 121s] + cd capi-network-serial-0.0.7 [ 121s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 121s] + cp /home/abuild/rpmbuild/SOURCES/capi-network-serial.manifest . [ 121s] + exit 0 [ 121s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.3yFVA5 [ 121s] + umask 022 [ 121s] + cd /home/abuild/rpmbuild/BUILD [ 121s] + cd capi-network-serial-0.0.7 [ 121s] ++ uname -m [ 121s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 121s] + LANG=C [ 121s] + export LANG [ 121s] + unset DISPLAY [ 121s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g' [ 121s] + export CFLAGS [ 121s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g' [ 121s] + export CXXFLAGS [ 121s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g -I%_fmoddir' [ 121s] + export FFLAGS [ 121s] + LD_AS_NEEDED=1 [ 121s] + export LD_AS_NEEDED [ 121s] ++ echo 0.0.7 [ 121s] ++ awk 'BEGIN {FS="."}{print $1}' [ 121s] + MAJORVER=0 [ 121s] + CFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g' [ 121s] + export CFLAGS [ 121s] + CXXFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g' [ 121s] + export CXXFLAGS [ 121s] + FFLAGS='-O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g -I%_fmoddir' [ 121s] + export FFLAGS [ 121s] + /usr/bin/cmake -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_INSTALL_LIBDIR:PATH=/usr/lib -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share -DCMAKE_SKIP_RPATH:BOOL=ON -DBUILD_SHARED_LIBS:BOOL=ON . -DFULLVER=0.0.7 -DMAJORVER=0 [ 122s] -- The C compiler identification is GNU 4.9.2 [ 122s] -- The CXX compiler identification is GNU 4.9.2 [ 122s] -- Check for working C compiler: /bin/cc [ 122s] -- Check for working C compiler: /bin/cc -- works [ 122s] -- Detecting C compiler ABI info [ 122s] -- Detecting C compiler ABI info - done [ 122s] -- Check for working CXX compiler: /bin/c++ [ 122s] -- Check for working CXX compiler: /bin/c++ -- works [ 122s] -- Detecting CXX compiler ABI info [ 122s] -- Detecting CXX compiler ABI info - done [ 122s] -- Found PkgConfig: /bin/pkg-config (found version "0.28") [ 122s] -- checking for module 'dlog glib-2.0 capi-base-common dbus-glib-1' [ 122s] -- found dlog glib-2.0 capi-base-common dbus-glib-1, version 1.0;2.43.1;0.1.6;0.100.2 [ 122s] -- Configuring done [ 122s] -- Generating done [ 122s] CMake Warning: [ 122s] Manually-specified variables were not used by the project: [ 122s] [ 122s] CMAKE_INSTALL_LIBDIR [ 122s] INCLUDE_INSTALL_DIR [ 122s] SHARE_INSTALL_PREFIX [ 122s] SYSCONF_INSTALL_DIR [ 122s] [ 122s] [ 122s] -- Build files have been written to: /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 122s] + make -j4 [ 122s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 -B/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 --check-build-system CMakeFiles/Makefile.cmake 0 [ 122s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/progress.marks [ 122s] make -f CMakeFiles/Makefile2 all [ 122s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/depend [ 122s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] cd /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/capi-network-serial.dir/DependInfo.cmake --color= [ 122s] Scanning dependencies of target capi-network-serial [ 122s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/build [ 122s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 122s] [100%] Building C object CMakeFiles/capi-network-serial.dir/src/serial.c.o [ 122s] /bin/cc -DPREFIX=\"/usr\" -DTIZEN_DEBUG -Dcapi_network_serial_EXPORTS -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g -I/usr/include/dlog -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -fPIC -I/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/include -o CMakeFiles/capi-network-serial.dir/src/serial.c.o -c /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/src/serial.c [ 122s] Linking C shared library libcapi-network-serial.so [ 122s] /usr/bin/cmake -E cmake_link_script CMakeFiles/capi-network-serial.dir/link.txt --verbose=1 [ 122s] /bin/cc -fPIC -O2 -g2 -feliminate-unused-debug-types -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=32 -Wformat -Wformat-security -m32 -march=core2 -mfpmath=sse -mssse3 -mtune=silvermont -fasynchronous-unwind-tables -fno-omit-frame-pointer -fipa-cp-clone -g -I/usr/include/dlog -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -fPIC -Wall -Werror -shared -Wl,-soname,libcapi-network-serial.so.0 -o libcapi-network-serial.so.0.0.7 CMakeFiles/capi-network-serial.dir/src/serial.c.o -ldlog -lcapi-base-common -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 [ 122s] /usr/bin/cmake -E cmake_symlink_library libcapi-network-serial.so.0.0.7 libcapi-network-serial.so.0 libcapi-network-serial.so [ 122s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 122s] [100%] Built target capi-network-serial [ 122s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 0 [ 122s] + exit 0 [ 122s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.3je9Pf [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd capi-network-serial-0.0.7 [ 122s] + LANG=C [ 122s] + export LANG [ 122s] + unset DISPLAY [ 122s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 [ 122s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 [ 122s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 install [ 122s] /usr/bin/cmake -H/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 -B/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 --check-build-system CMakeFiles/Makefile.cmake 0 [ 122s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/progress.marks [ 122s] /bin/make -f CMakeFiles/Makefile2 all [ 122s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /bin/make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/depend [ 122s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] cd /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles/capi-network-serial.dir/DependInfo.cmake --color= [ 122s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /bin/make -f CMakeFiles/capi-network-serial.dir/build.make CMakeFiles/capi-network-serial.dir/build [ 122s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] make[2]: Nothing to be done for 'CMakeFiles/capi-network-serial.dir/build'. [ 122s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /usr/bin/cmake -E cmake_progress_report /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 1 [ 122s] [100%] Built target capi-network-serial [ 122s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] /usr/bin/cmake -E cmake_progress_start /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7/CMakeFiles 0 [ 122s] /bin/make -f CMakeFiles/Makefile2 preinstall [ 122s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] make[1]: Nothing to be done for 'preinstall'. [ 122s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7' [ 122s] Install the project... [ 122s] /usr/bin/cmake -P cmake_install.cmake [ 122s] -- Install configuration: "" [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/lib/libcapi-network-serial.so.0.0.7 [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/lib/libcapi-network-serial.so.0 [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/lib/libcapi-network-serial.so [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/include/network [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/include/network/serial.h [ 122s] -- Installing: /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/lib/pkgconfig/capi-network-serial.pc [ 122s] + rm -f /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/share/info/dir [ 122s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 -regex '.*\.la$' [ 122s] + xargs rm -f -- [ 122s] + find /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 -regex '.*\.a$' [ 122s] + xargs rm -f -- [ 122s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/capi-network-serial-0.0.7 [ 122s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386/usr/lib/libcapi-network-serial.so.0.0.7 [ 122s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 122s] cpio: glibc-2.20/debug: Cannot stat: No such file or directory [ 122s] cpio: glibc-2.20/debug/stack_chk_fail_local.c: Cannot stat: No such file or directory [ 122s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 122s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 122s] 38 blocks [ 122s] + /usr/lib/rpm/brp-compress [ 122s] + /usr/lib/rpm/brp-tizen [ 122s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 [ 122s] Processing files: capi-network-serial-0.0.7-6.1.i686 [ 122s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 122s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 122s] [ 122s] Provides: capi-network-serial = 0.0.7-6.1 capi-network-serial(x86-32) = 0.0.7-6.1 libcapi-network-serial.so.0 [ 122s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Requires(post): /sbin/ldconfig [ 122s] Requires(postun): /sbin/ldconfig [ 122s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.4) libdbus-1.so.3 libdbus-glib-1.so.2 libdlog.so.0 libglib-2.0.so.0 [ 122s] Processing files: capi-network-serial-debugsource-0.0.7-6.1.i686 [ 122s] Provides: capi-network-serial-debugsource = 0.0.7-6.1 capi-network-serial-debugsource(x86-32) = 0.0.7-6.1 [ 122s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 122s] Processing files: capi-network-serial-devel-0.0.7-6.1.i686 [ 122s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 122s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 122s] [ 122s] Provides: capi-network-serial-devel = 0.0.7-6.1 capi-network-serial-devel(x86-32) = 0.0.7-6.1 pkgconfig(capi-network-serial) [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Requires: /usr/bin/pkg-config pkgconfig(capi-base-common) [ 122s] Processing files: capi-network-serial-debuginfo-0.0.7-6.1.i686 [ 122s] Provides: debuginfo(build-id) = 7c9b2a878983bfe9644c499f3c92d49376e63f42 [ 122s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 122s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 [ 122s] Wrote: /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-6.1.src.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-0.0.7-6.1.i686.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debugsource-0.0.7-6.1.i686.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-devel-0.0.7-6.1.i686.rpm [ 122s] Wrote: /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debuginfo-0.0.7-6.1.i686.rpm [ 122s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.UtSmji [ 122s] + umask 022 [ 122s] + cd /home/abuild/rpmbuild/BUILD [ 122s] + cd capi-network-serial-0.0.7 [ 122s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/capi-network-serial-0.0.7-6.1.i386 [ 122s] + exit 0 [ 122s] ... checking for files with abuild user/group [ 122s] [ 122s] RPMLINT report: [ 122s] =============== [ 124s] capi-network-serial.i686: E: non-standard-group (Badness: 200) API [ 124s] capi-network-serial.src: E: non-standard-group (Badness: 200) API [ 124s] The value of the Group tag in the package is not valid. Valid groups are [ 124s] listed here: https://wiki.tizen.org/wiki/Packaging/Guidelines#Group_Tag [ 124s] [ 124s] capi-network-serial-devel.i686: E: invalid-license (Badness: 200) Apache License, Version 2.0 [ 124s] capi-network-serial.i686: E: invalid-license (Badness: 200) Apache License, Version 2.0 [ 124s] capi-network-serial.src: E: invalid-license (Badness: 200) Apache License, Version 2.0 [ 124s] The specified license string is not recognized. Please refer to [ 124s] http://spdx.org/licenses/ for the list of known licences and their exact [ 124s] spelling. [ 124s] [ 124s] capi-network-serial-devel.i686: W: description-shorter-than-summary [ 124s] capi-network-serial.i686: W: description-shorter-than-summary [ 124s] capi-network-serial.src: W: description-shorter-than-summary [ 124s] The package description should be longer than the summary. be a bit more [ 124s] verbose, please. [ 124s] [ 124s] 3 packages and 0 specfiles checked; 5 errors, 3 warnings. [ 124s] [ 124s] ... creating baselibs [ 125s] ... comparing built packages with the former built [ 125s] /usr/lib/build/rpm-check.sh [ 125s] compare /.build.oldpackages/capi-network-serial-0.0.7-4.8.src.rpm /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-6.1.src.rpm [ 125s] comparing rpmtags [ 125s] --- /tmp/tmp.gCHex5sayD 2015-01-19 15:10:43.402184064 +0000 [ 125s] +++ /tmp/tmp.0qt5Fz2EAk 2015-01-19 15:10:43.410184064 +0000 [ 125s] @@ -1,7 +1,7 @@ [ 125s] capi-network-serial 0.0.7 (none) [ 125s] Network Serial Framework [ 125s] Network Serial Framework [ 125s] - tizen Tizen:IVI / emulator obs://build.tizen.org/Tizen:IVI/emulator/b4ed7d96b288e441eacc223761d03b26-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 125s] + tizen Tizen:3.0:IVI / emulator obs://build.tizen.org/Tizen:3.0:IVI/emulator/25a0429a6f8c07cb9704626bdc71cb21-serial Apache License, Version 2.0 Apache License, Version 2.0 [ 125s] API (none) (none) (none) (none) [ 125s] (none) 4.11.0.1 (none) [ 125s] cpio gzip 9 [ 125s] RPM meta information is different [ 125s] ... saving built statistics [ 125s] ... saving built packages [ 125s] /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-0.0.7-6.1.i686.rpm [ 125s] /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debuginfo-0.0.7-6.1.i686.rpm [ 125s] /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-debugsource-0.0.7-6.1.i686.rpm [ 125s] /home/abuild/rpmbuild/RPMS/i686/capi-network-serial-devel-0.0.7-6.1.i686.rpm [ 125s] /home/abuild/rpmbuild/SRPMS/capi-network-serial-0.0.7-6.1.src.rpm [ 125s] /home/abuild/rpmbuild/OTHER/_statistics [ 125s] /home/abuild/rpmbuild/OTHER/rpmlint.log [ 126s] [ 126s] w18 finished "build capi-network-serial.spec" at Mon Jan 19 15:10:43 UTC 2015. [ 126s] [ 127s] /.build/build: line 368: 211 Killed background_monitor_process [ 131s] [ 123.376921] SysRq : Power Off [ 131s] [ 123.384430] Power down. [ 132s] build: extracting built packages... [ 132s] capi-network-serial-0.0.7-6.1.i686.rpm [ 132s] capi-network-serial-debuginfo-0.0.7-6.1.i686.rpm [ 132s] capi-network-serial-debugsource-0.0.7-6.1.i686.rpm [ 132s] capi-network-serial-devel-0.0.7-6.1.i686.rpm [ 132s] capi-network-serial-0.0.7-6.1.src.rpm [ 132s] _statistics [ 132s] rpmlint.log Retried build at Wed Jan 21 20:13:38 2015 returned same result, skipped Retried build at Fri Jan 23 10:05:23 2015 returned same result, skipped