[ 0s] Using BUILD_ROOT=/srv/build/root_1/.mount [ 0s] Using BUILD_ARCH=armv7l:armv5tel [ 0s] Doing kvm build in /srv/build/root_1/root [ 0s] [ 0s] [ 0s] w27 started "build _service:gbs:powertop.spec" at Fri Mar 31 18:35:25 UTC 2017. [ 0s] [ 0s] Building powertop for project 'Tizen:IVI' repository 'arm' arch 'armv7l' srcmd5 'ed25272c63ea4e3160c46d92b32cdcdb' [ 0s] [ 0s] processing specfile /srv/build/root_1/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_1/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/1/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_1/.build.rpmlist /srv/build/root_1/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 1s] cycle: libsoftokn3 -> nss [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/40] preinstalling libmagic-data... [ 1s] [2/40] preinstalling setup... [ 1s] [3/40] preinstalling filesystem... [ 1s] [4/40] preinstalling glibc... [ 1s] [5/40] preinstalling libgcc... [ 1s] [6/40] preinstalling bash... [ 1s] [7/40] preinstalling diffutils... [ 1s] [8/40] preinstalling grep... [ 1s] [9/40] preinstalling libattr... [ 1s] [10/40] preinstalling libbz2... [ 1s] [11/40] preinstalling libcap... [ 1s] [12/40] preinstalling libelf... [ 1s] [13/40] preinstalling libfreebl3... [ 1s] [14/40] preinstalling liblua... [ 1s] [15/40] preinstalling liblzma... [ 1s] [16/40] preinstalling libncurses... [ 1s] [17/40] preinstalling libpopt... [ 1s] [18/40] preinstalling libsmack... [ 1s] [19/40] preinstalling libsqlite... [ 1s] [20/40] preinstalling libuuid... [ 1s] [21/40] preinstalling nspr... [ 1s] [22/40] preinstalling sed... [ 1s] [23/40] preinstalling zlib... [ 1s] [24/40] preinstalling qemu-accel-x86_64-armv7l... [ 5s] [25/40] preinstalling qemu-linux-user-x86_64-cross... [ 6s] [26/40] preinstalling coreutils... [ 6s] [27/40] preinstalling libacl... [ 6s] [28/40] preinstalling libblkid... [ 6s] [29/40] preinstalling libreadline... [ 6s] [30/40] preinstalling smack... [ 6s] [31/40] preinstalling bzip2... [ 6s] [32/40] preinstalling libmagic... [ 6s] [33/40] preinstalling libxml2... [ 6s] [34/40] preinstalling libmount... [ 6s] [35/40] preinstalling tar... [ 6s] [36/40] preinstalling util-linux... [ 7s] [37/40] preinstalling util-linux-su... [ 7s] [38/40] preinstalling nss... [ 7s] [39/40] preinstalling libsoftokn3... [ 7s] [40/40] preinstalling rpm... [ 7s] [ 7s] [1/10] preinstalling libext2fs... [ 7s] [2/10] preinstalling libpcre... [ 7s] [3/10] preinstalling libsmartcols... [ 7s] [4/10] preinstalling libuuid... [ 7s] [5/10] preinstalling perl... [ 8s] [6/10] preinstalling procps-ng... [ 8s] [7/10] preinstalling grep... [ 8s] [8/10] preinstalling libblkid... [ 8s] [9/10] preinstalling libmount... [ 8s] [10/10] preinstalling util-linux... [ 8s] copying packages... [ 8s] reordering...cycle: libsoftokn3 -> nss [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 27s] booting kvm ... [ 27s] /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/initvm.x86_64 -m 6000 -drive file=/srv/build/root_1/root,if=virtio,cache=none -drive file=/srv/build/root_1/root,if=ide,index=0,cache=none -drive file=/srv/build/root_1/swap,if=virtio,cache=none -smp 4 [ 31s] doing fast boot [ 31s] Creating device nodes with udev [ 34s] Waiting for device /dev/vda to appear: ok [ 34s] fsck from util-linux 2.21.2 [ 34s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 34s] /dev/vda: clean, 5129/2392064 files, 270685/9568256 blocks [ 34s] fsck succeeded. Mounting root device read-write. [ 34s] Mounting root /dev/vda [ 34s] mount -o rw -t ext4 /dev/vda /root [ 35s] replacing /etc/mtab with symlink to /proc/self/mounts [ 37s] 2nd stage started in virtual machine [ 37s] machine type: armv7l [ 37s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 37s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 37s] swapon /dev/vdb [ 38s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 39s] mount: none is already mounted or /proc busy [ 39s] mount: none is already mounted or /dev/pts busy [ 39s] logging output to //.build.log... [ 39s] processing specfile /.build-srcdir/_service:gbs:powertop.spec ... [ 39s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 57s] running qemu-linux-user-x86_64-cross postinstall script [ 57s] running qemu-accel-x86_64-armv7l postinstall script [ 57s] ln: creating symbolic link `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/4.9.2/liblto_plugin.so': No such file or directory [ 57s] running setup postinstall script [ 57s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 57s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 57s] initializing rpm db... [ 61s] [1/97] installing libmagic-data-5.28-6.1 [ 63s] [2/97] installing setup-0.9-4.4 [ 72s] [3/97] installing terminfo-base-5.9-3.1 [ 73s] [4/97] installing filesystem-3.1-13.1 [ 78s] [5/97] installing glibc-2.20-14.1 [ 80s] [6/97] installing libatomic-4.9.2-21.2 [ 80s] [7/97] installing libgcc-4.9.2-21.2 [ 80s] [8/97] installing libgomp-4.9.2-21.2 [ 81s] [9/97] installing bash-3.2.57-3.5 [ 81s] [10/97] installing cpio-2.11-3.1 [ 82s] [11/97] installing diffutils-3.3-1.14 [ 83s] [12/97] installing findutils-4.3.8-3.2 [ 84s] [13/97] installing hostname-3.12-1.9 [ 84s] [14/97] installing libattr-2.4.47-2.2 [ 85s] [15/97] installing libbz2-1.0.6-2.33 [ 85s] [16/97] installing libcap-2.24-1.92 [ 86s] [17/97] installing libelf-0.153-6.14 [ 86s] [18/97] installing libext2fs-1.42.13-3.1 [ 88s] [19/97] installing libfreebl3-3.23-6.6 [ 88s] [20/97] installing libitm-4.9.2-21.2 [ 88s] [21/97] installing libltdl-2.4.2-3.7 [ 89s] [22/97] installing liblua-5.1.4-1.19 [ 89s] [23/97] installing liblzma-5.2.2-6.1 [ 90s] [24/97] installing libnl2-2.0-3.1 [ 90s] [25/97] installing libpcre-8.39-4.1 [ 93s] [26/97] installing libpopt-1.16-2.8 [ 95s] [27/97] installing libsmack-1.3.0-5.2 [ 95s] [28/97] installing libsmartcols-2.28-9.1 [ 95s] [29/97] installing libsqlite-3.8.10.2-1.16 [ 95s] [30/97] installing libstdc++-4.9.2-21.2 [ 96s] [31/97] installing libuuid-2.28-9.1 [ 96s] [32/97] installing m4-1.4.17-2.2 [ 97s] [33/97] installing net-tools-2.0_20121208git-1.12 [ 97s] [34/97] installing nspr-4.12-5.10 [ 98s] [35/97] installing patch-2.7-1.11 [ 98s] [36/97] installing pkg-config-0.28-1.14 [ 98s] [37/97] installing sed-4.1c-2.7 [ 99s] [38/97] installing update-alternatives-1.18.15-2.1 [ 99s] [39/97] installing which-2.20-1.9 [ 99s] [40/97] installing zlib-1.2.8-3.1 [ 99s] [41/97] installing libncurses-5.9-3.1 [ 100s] [42/97] installing libncurses6-5.9-3.1 [ 100s] [43/97] installing build-compare-2015.04.28-6.17 [ 101s] [44/97] installing libstdc++-devel-4.9.2-21.2 [ 101s] [45/97] installing qemu-linux-user-x86_64-cross-2.7.0-1.2.1 [ 104s] [46/97] installing cpp-4.9.2-21.2 [ 105s] [47/97] installing gcc-c++-4.9.2-21.2 [ 106s] [48/97] installing libnl2-devel-2.0-3.1 [ 106s] [49/97] installing binutils-2.25-7.10 [ 106s] [50/97] installing coreutils-6.9-8.2 [ 107s] [51/97] installing db4-4.8.30.NC-2.2 [ 107s] [52/97] installing gawk-3.1.5-2.12 [ 107s] [53/97] installing grep-2.5.2-2.12 [ 107s] [54/97] installing less-466-1.12 [ 107s] [55/97] installing libacl-2.2.52-3.6 [ 107s] [56/97] installing libasm-0.153-6.14 [ 107s] [57/97] installing libblkid-2.28-9.1 [ 108s] [58/97] installing libreadline-5.2-2.7 [ 108s] [59/97] installing libubsan-4.9.2-21.2 [ 108s] [60/97] installing make-4.0-2.2 [ 108s] [61/97] installing nss-certs-3.23-6.6 [ 109s] [62/97] installing procps-ng-3.3.9-4.1 [ 109s] [63/97] installing smack-1.3.0-5.2 [ 109s] [64/97] installing bzip2-1.0.6-2.33 [ 109s] [65/97] installing gettext-runtime-0.19.7-2.7 [ 110s] [66/97] installing libmagic-5.28-6.1 [ 110s] [67/97] installing libxml2-2.9.4-5.5 [ 110s] [68/97] installing xz-5.2.2-6.1 [ 110s] [69/97] installing libdw-0.153-6.14 [ 110s] [70/97] installing ncurses-devel-5.9-3.1 [ 110s] [71/97] installing linux-glibc-devel-3.10-1.4 [ 110s] [72/97] installing file-5.28-6.1 [ 111s] [73/97] installing glibc-locale-2.20-14.1 [ 111s] [74/97] installing libmount-2.28-9.1 [ 111s] [75/97] installing tar-1.17-2.9 [ 111s] [76/97] installing gettext-tools-0.19.7-2.7 [ 112s] [77/97] installing gzip-1.3.12-2.15 [ 112s] [78/97] installing libfdisk1-2.28-9.1 [ 112s] [79/97] installing pam-1.1.6-5.1 [ 113s] [80/97] installing perl-5.20.0-4.3 [ 122s] [81/97] installing tzdata-2016i-3.1 [ 122s] [82/97] installing elfutils-0.153-6.14 [ 123s] [83/97] installing gcc-4.9.2-21.2 [ 123s] [84/97] installing build-mkbaselibs-20120927-1.4 [ 124s] [85/97] installing glibc-devel-2.20-14.1 [ 124s] [86/97] installing qemu-accel-x86_64-armv7l-0.4-15.4 [ 134s] warning: %post(qemu-accel-x86_64-armv7l-0.4-15.4.armv7l) scriptlet failed, exit status 1 [ 134s] [87/97] installing autoconf-2.69-1.7 [ 134s] [88/97] installing util-linux-2.28-9.1 [ 135s] [89/97] installing zlib-devel-1.2.8-3.1 [ 136s] [90/97] installing automake-1.14.1-1.5 [ 136s] [91/97] installing util-linux-su-2.28-9.1 [ 136s] [92/97] installing build-20120927-1.4 [ 136s] [93/97] installing libtool-2.4.2-3.7 [ 137s] [94/97] installing nss-3.23-6.6 [ 137s] [95/97] installing libsoftokn3-3.23-6.6 [ 138s] [96/97] installing rpm-4.11.0.1-13.1 [ 142s] [97/97] installing rpm-build-4.11.0.1-13.1 [ 143s] removing nis flags from //etc/nsswitch.conf... [ 143s] now finalizing build dir... [ 153s] build target is armv7l-tizen-linux [ 153s] ----------------------------------------------------------------- [ 153s] I have the following modifications for powertop.spec: [ 153s] 4c4 [ 153s] < Release: 1 [ 153s] --- [ 153s] > Release: 2.31 [ 153s] 11c11 [ 153s] < BuildRequires: gettext [ 153s] --- [ 153s] > BuildRequires: gettext-tools [ 153s] 46a47 [ 153s] > %changelog [ 153s] ----------------------------------------------------------------- [ 153s] ----- building powertop.spec (user abuild) [ 153s] ----------------------------------------------------------------- [ 153s] ----------------------------------------------------------------- [ 153s] Running qemu build hang workaround... [ 153s] /bin/ps command found [ 153s] QEMU_HANG_FIX_PID=1574 [ 154s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:IVI/arm/ed25272c63ea4e3160c46d92b32cdcdb-powertop' /home/abuild/rpmbuild/SOURCES/powertop.spec [ 154s] Building target platforms: armv7l-tizen-linux [ 154s] Building for target armv7l-tizen-linux [ 154s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.8RlXyW [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + rm -rf powertop-2.5 [ 154s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 154s] + /bin/tar -xf - [ 154s] + STATUS=0 [ 154s] + '[' 0 -ne 0 ']' [ 154s] + cd powertop-2.5 [ 154s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 154s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 154s] + exit 0 [ 154s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.r9ZWKA [ 154s] + umask 022 [ 154s] + cd /home/abuild/rpmbuild/BUILD [ 154s] + cd powertop-2.5 [ 154s] ++ uname -m [ 154s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 154s] + LANG=C [ 154s] + export LANG [ 154s] + unset DISPLAY [ 154s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + LDFLAGS= [ 154s] + export LDFLAGS [ 154s] + LD_AS_NEEDED=1 [ 154s] + export LD_AS_NEEDED [ 154s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 154s] + export CFLAGS [ 154s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 154s] + export CXXFLAGS [ 154s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 154s] + export FFLAGS [ 154s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 154s] checking for a BSD-compatible install... /bin/install -c [ 154s] checking whether build environment is sane... yes [ 154s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 154s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 154s] configure: WARNING: 'missing' script is too old or missing [ 154s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 154s] checking for gawk... gawk [ 154s] checking whether make sets $(MAKE)... yes [ 154s] checking whether make supports nested variables... yes [ 154s] checking whether make supports nested variables... (cached) yes [ 154s] checking whether NLS is requested... yes [ 154s] checking for msgfmt... /bin/msgfmt [ 154s] checking for gmsgfmt... /bin/msgfmt [ 154s] checking for xgettext... /bin/xgettext [ 154s] checking for msgmerge... /bin/msgmerge [ 154s] checking for style of include used by make... GNU [ 154s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 155s] checking whether the C compiler works... yes [ 155s] checking for C compiler default output file name... a.out [ 155s] checking for suffix of executables... [ 155s] checking whether we are cross compiling... no [ 155s] checking for suffix of object files... o [ 155s] checking whether we are using the GNU C compiler... yes [ 155s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 155s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 155s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 155s] checking build system type... armv7l-tizen-linux-gnueabi [ 155s] checking host system type... armv7l-tizen-linux-gnueabi [ 155s] checking for ld used by GCC... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 155s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 155s] checking for shared library run path origin... done [ 155s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 155s] checking whether we are using the GNU C++ compiler... yes [ 155s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 155s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 155s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 155s] checking for grep that handles long lines and -e... /bin/grep [ 155s] checking for egrep... /bin/grep -E [ 155s] checking for CFPreferencesCopyAppValue... no [ 155s] checking for CFLocaleCopyCurrent... no [ 155s] checking for GNU gettext in libc... yes [ 155s] checking whether to use NLS... yes [ 155s] checking where the gettext function comes from... libc [ 155s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 155s] checking for armv7l-tizen-linux-gnueabi-lib... no [ 155s] checking for armv7l-tizen-linux-gnueabi-link... no [ 155s] checking for ar... ar [ 155s] checking the archiver (ar) interface... ar [ 155s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 156s] checking whether we are using the GNU C++ compiler... (cached) yes [ 156s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... (cached) yes [ 156s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... (cached) gcc3 [ 156s] checking how to print strings... printf [ 156s] checking for a sed that does not truncate output... /bin/sed [ 156s] checking for fgrep... /bin/grep -F [ 156s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 156s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 156s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 156s] checking the name lister (/bin/nm -B) interface... BSD nm [ 156s] checking whether ln -s works... yes [ 156s] checking the maximum length of command line arguments... 1572864 [ 156s] checking whether the shell understands some XSI constructs... yes [ 156s] checking whether the shell understands "+="... yes [ 156s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 156s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 156s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 156s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 156s] checking for objdump... objdump [ 156s] checking how to recognize dependent libraries... pass_all [ 156s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 156s] checking for dlltool... no [ 156s] checking how to associate runtime and link libraries... printf %s\n [ 156s] checking for armv7l-tizen-linux-gnueabi-ar... ar [ 156s] checking for archiver @FILE support... @ [ 156s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 156s] checking for strip... strip [ 156s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 156s] checking for ranlib... ranlib [ 158s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 158s] checking for sysroot... no [ 158s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 158s] checking for mt... no [ 158s] checking if : is a manifest tool... no [ 159s] checking for ANSI C header files... yes [ 159s] checking for sys/types.h... yes [ 159s] checking for sys/stat.h... yes [ 159s] checking for stdlib.h... yes [ 159s] checking for string.h... yes [ 159s] checking for memory.h... yes [ 159s] checking for strings.h... yes [ 159s] checking for inttypes.h... yes [ 159s] checking for stdint.h... yes [ 159s] checking for unistd.h... yes [ 159s] checking for dlfcn.h... yes [ 159s] checking for objdir... .libs [ 160s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 160s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 160s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 161s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 162s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 162s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 162s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 162s] checking whether -lc should be explicitly linked in... no [ 162s] checking dynamic linker characteristics... GNU/Linux ld.so [ 162s] checking how to hardcode library paths into programs... immediate [ 162s] checking whether stripping libraries is possible... yes [ 162s] checking if libtool supports shared libraries... yes [ 162s] checking whether to build shared libraries... yes [ 162s] checking whether to build static libraries... no [ 162s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 164s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 164s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 164s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 164s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 166s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 166s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 166s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 166s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 166s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 166s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 166s] checking how to hardcode library paths into programs... immediate [ 166s] checking for armv7l-tizen-linux-gnueabi-gcc... (cached) armv7l-tizen-linux-gnueabi-gcc [ 166s] checking whether we are using the GNU C compiler... (cached) yes [ 166s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... (cached) yes [ 166s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... (cached) none needed [ 166s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... (cached) gcc3 [ 169s] checking whether armv7l-tizen-linux-gnueabi-gcc and cc understand -c and -o together... yes [ 169s] checking fcntl.h usability... yes [ 169s] checking fcntl.h presence... yes [ 169s] checking for fcntl.h... yes [ 169s] checking libintl.h usability... yes [ 169s] checking libintl.h presence... yes [ 169s] checking for libintl.h... yes [ 169s] checking limits.h usability... yes [ 170s] checking limits.h presence... yes [ 170s] checking for limits.h... yes [ 170s] checking locale.h usability... yes [ 170s] checking locale.h presence... yes [ 170s] checking for locale.h... yes [ 170s] checking malloc.h usability... yes [ 170s] checking malloc.h presence... yes [ 170s] checking for malloc.h... yes [ 170s] checking for stdint.h... (cached) yes [ 170s] checking for stdlib.h... (cached) yes [ 170s] checking for string.h... (cached) yes [ 170s] checking sys/ioctl.h usability... yes [ 170s] checking sys/ioctl.h presence... yes [ 170s] checking for sys/ioctl.h... yes [ 170s] checking sys/socket.h usability... yes [ 170s] checking sys/socket.h presence... yes [ 170s] checking for sys/socket.h... yes [ 170s] checking sys/statfs.h usability... yes [ 170s] checking sys/statfs.h presence... yes [ 170s] checking for sys/statfs.h... yes [ 170s] checking sys/time.h usability... yes [ 170s] checking sys/time.h presence... yes [ 170s] checking for sys/time.h... yes [ 170s] checking termios.h usability... yes [ 170s] checking termios.h presence... yes [ 170s] checking for termios.h... yes [ 170s] checking for unistd.h... (cached) yes [ 170s] checking ncurses.h usability... yes [ 170s] checking ncurses.h presence... yes [ 170s] checking for ncurses.h... yes [ 170s] checking for stdbool.h that conforms to C99... yes [ 170s] checking for _Bool... no [ 170s] checking for inline... inline [ 170s] checking for int64_t... yes [ 170s] checking for pid_t... yes [ 171s] checking for size_t... yes [ 171s] checking for ssize_t... yes [ 171s] checking for uint16_t... yes [ 171s] checking for uint32_t... yes [ 171s] checking for uint64_t... yes [ 171s] checking for stdlib.h... (cached) yes [ 171s] checking for GNU libc compatible malloc... yes [ 171s] checking for stdlib.h... (cached) yes [ 171s] checking for unistd.h... (cached) yes [ 171s] checking for sys/param.h... yes [ 171s] checking for getpagesize... yes [ 171s] checking for working mmap... yes [ 171s] checking for stdlib.h... (cached) yes [ 171s] checking for GNU libc compatible realloc... yes [ 171s] checking for working strtod... yes [ 172s] checking for fdatasync... yes [ 172s] checking for getpagesize... (cached) yes [ 172s] checking for gettimeofday... yes [ 172s] checking for memmove... yes [ 172s] checking for memset... yes [ 173s] checking for mkdir... yes [ 173s] checking for munmap... yes [ 173s] checking for pow... yes [ 173s] checking for realpath... yes [ 173s] checking for regcomp... yes [ 173s] checking for select... yes [ 174s] checking for setlocale... yes [ 174s] checking for socket... yes [ 174s] checking for sqrt... yes [ 174s] checking for strcasecmp... yes [ 174s] checking for strchr... yes [ 174s] checking for strdup... yes [ 174s] checking for strerror... yes [ 174s] checking for strncasecmp... yes [ 174s] checking for strstr... yes [ 174s] checking for strtoul... yes [ 174s] checking for strtoull... yes [ 174s] checking for library containing delwin... -lncursesw [ 174s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 174s] checking pkg-config is at least version 0.9.0... yes [ 174s] checking for PCIUTILS... no [ 175s] checking for library containing pci_get_dev... no [ 175s] checking for LIBNL... no [ 175s] checking for LIBNL... yes [ 175s] configure: WARNING: [ 175s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 175s] If you need or want pci support, please install libpci [ 175s] and re-configure PowerTOP. [ 175s] ********************************************************* [ 175s] [ 176s] checking for library containing pthread_create... -lpthread [ 176s] checking for library containing inet_aton... none required [ 176s] checking that generated files are newer than configure... done [ 176s] configure: creating ./config.status [ 176s] config.status: creating Makefile [ 176s] config.status: creating src/Makefile [ 176s] config.status: creating traceevent/Makefile [ 176s] config.status: creating po/Makefile.in [ 176s] config.status: creating doc/Makefile [ 176s] config.status: creating config.h [ 176s] config.status: executing po-directories commands [ 176s] config.status: creating po/POTFILES [ 176s] config.status: creating po/Makefile [ 176s] config.status: executing depfiles commands [ 178s] config.status: executing libtool commands [ 178s] + make -j4 [ 178s] make all-recursive [ 178s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 178s] Making all in traceevent [ 178s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 178s] CC event-parse.lo [ 178s] CC parse-filter.lo [ 178s] CC parse-utils.lo [ 178s] CC trace-seq.lo [ 178s] event-parse.c: In function '__read_token': [ 178s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 178s] if (asprintf(tok, "%c", ch) < 0) [ 178s] ^ [ 178s] event-parse.c: In function 'pevent_strerror': [ 178s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 178s] msg = strerror_r(errnum, buf, buflen); [ 178s] ^ [ 178s] parse-filter.c: In function 'arg_to_str': [ 178s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 178s] char *op; [ 178s] ^ [ 178s] parse-filter.c: In function 'reparent_op_arg': [ 178s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 178s] *ptr = NULL; [ 178s] ^ [ 178s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 178s] free_arg(other_child); [ 178s] ^ [ 179s] event-parse.c: In function 'pevent_find_event_by_name': [ 179s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 179s] pevent->last_event = event; [ 179s] ^ [ 179s] event-parse.c: In function 'pevent_data_lat_fmt': [ 179s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 179s] trace_seq_printf(s, "%d", migrate_disable); [ 179s] ^ [ 179s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 179s] trace_seq_printf(s, "%d", lock_depth); [ 179s] ^ [ 179s] event-parse.c: In function 'pevent_event_info': [ 179s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 179s] print_str_arg(s, data, size, event, [ 179s] ^ [ 179s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 179s] int len_arg; [ 179s] ^ [ 179s] CCLD libtraceevnet.la [ 179s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 179s] Making all in src [ 179s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 179s] make all-am [ 179s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 179s] CXX powertop-display.o [ 179s] CXX powertop-devlist.o [ 179s] CXX powertop-lib.o [ 179s] CXX report/powertop-report-maker.o [ 180s] CXX report/powertop-report-formatter-base.o [ 180s] In file included from /usr/include/stdio.h:27:0, [ 180s] from report/report-formatter-base.cpp:31: [ 180s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 180s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 180s] ^ [ 180s] CXX report/powertop-report-formatter-csv.o [ 180s] In file included from /usr/include/stdio.h:27:0, [ 180s] from report/report-formatter-csv.cpp:31: [ 180s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 180s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 180s] ^ [ 180s] CXX report/powertop-report-formatter-html.o [ 180s] In file included from /usr/include/stdio.h:27:0, [ 180s] from report/report-formatter-html.cpp:31: [ 180s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 180s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 180s] ^ [ 180s] CXX powertop-main.o [ 180s] CXX cpu/powertop-intel_gpu.o [ 180s] CXX cpu/powertop-cpu_rapl_device.o [ 181s] CXX cpu/powertop-dram_rapl_device.o [ 181s] CXX devices/powertop-gpu_rapl_device.o [ 181s] CXX parameters/powertop-persistent.o [ 181s] CXX parameters/powertop-learn.o [ 181s] CXX parameters/powertop-parameters.o [ 181s] CXX cpu/powertop-cpu_core.o [ 181s] CXX cpu/powertop-cpudevice.o [ 181s] CXX cpu/powertop-cpu.o [ 181s] CXX cpu/powertop-cpu_linux.o [ 181s] CXX cpu/powertop-abstract_cpu.o [ 182s] CXX cpu/powertop-cpu_package.o [ 182s] CXX cpu/powertop-intel_cpus.o [ 182s] CXX report/powertop-report.o [ 182s] CXX process/powertop-process.o [ 182s] CXX process/powertop-processdevice.o [ 182s] CXX process/powertop-powerconsumer.o [ 182s] CXX process/powertop-timer.o [ 183s] CXX process/powertop-work.o [ 183s] CXX process/powertop-do_process.o [ 183s] CXX process/powertop-interrupt.o [ 183s] CXX perf/powertop-perf.o [ 183s] CXX perf/powertop-perf_bundle.o [ 183s] CXX devices/powertop-i915-gpu.o [ 183s] CXX devices/powertop-device.o [ 183s] CXX devices/powertop-alsa.o [ 184s] CXX devices/powertop-runtime_pm.o [ 184s] CXX devices/powertop-thinkpad-fan.o [ 184s] CXX devices/powertop-usb.o [ 184s] CXX devices/powertop-ahci.o [ 184s] CXX devices/powertop-thinkpad-light.o [ 184s] CXX devices/powertop-rfkill.o [ 185s] CXX devices/powertop-backlight.o [ 185s] CXX devices/powertop-network.o [ 185s] CXX tuning/powertop-bluetooth.o [ 185s] CXX tuning/powertop-cpufreq.o [ 185s] CXX tuning/powertop-tuning.o [ 185s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 185s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 185s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 185s] ^ [ 185s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 185s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 185s] ^ [ 185s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 185s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 185s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 185s] ^ [ 185s] CXX tuning/powertop-tuningusb.o [ 185s] CXX tuning/powertop-ethernet.o [ 186s] CXX tuning/powertop-tunable.o [ 186s] CC tuning/powertop-iw.o [ 186s] CXX tuning/powertop-wifi.o [ 186s] CXX tuning/powertop-tuningsysfs.o [ 186s] CXX tuning/powertop-runtime.o [ 186s] CXX calibrate/powertop-calibrate.o [ 186s] CXX measurement/powertop-measurement.o [ 186s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 186s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 186s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 186s] ^ [ 186s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 186s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 186s] ^ [ 186s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 186s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 186s] write(fd, buffer, 64*1024); [ 186s] ^ [ 186s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 186s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 186s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 186s] ^ [ 186s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 186s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 186s] ^ [ 186s] CXX measurement/powertop-acpi.o [ 186s] CXX measurement/powertop-sysfs.o [ 186s] CXX measurement/powertop-extech.o [ 186s] CXX cpu/rapl/powertop-rapl_interface.o [ 187s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 187s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 187s] write(fd, " ", 1); [ 187s] ^ [ 187s] CXXLD powertop [ 187s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] Making all in po [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 187s] Making all in doc [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 187s] make[2]: Nothing to be done for 'all'. [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 187s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 187s] + exit 0 [ 187s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.UYEm5f [ 187s] + umask 022 [ 187s] + cd /home/abuild/rpmbuild/BUILD [ 187s] + cd powertop-2.5 [ 187s] + LANG=C [ 187s] + export LANG [ 187s] + unset DISPLAY [ 187s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm [ 187s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm [ 187s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm install [ 187s] Making install in traceevent [ 187s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 187s] make[2]: Nothing to be done for 'install-exec-am'. [ 187s] make[2]: Nothing to be done for 'install-data-am'. [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 187s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 187s] Making install in src [ 187s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] /bin/make install-am [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/sbin' [ 187s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/sbin' [ 187s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/sbin/powertop [ 187s] make[3]: Nothing to be done for 'install-data-am'. [ 187s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 187s] Making install in po [ 187s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 187s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 187s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 187s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 187s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 187s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 187s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 187s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 187s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 187s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 188s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 188s] if test "powertop" = "gettext-tools"; then \ [ 188s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/gettext/po; \ [ 188s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 188s] /bin/install -c -m 644 ./$file \ [ 188s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/gettext/po/$file; \ [ 188s] done; \ [ 188s] for file in Makevars; do \ [ 188s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/gettext/po/$file; \ [ 188s] done; \ [ 188s] else \ [ 188s] : ; \ [ 188s] fi [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 188s] Making install in doc [ 188s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 188s] make[2]: Nothing to be done for 'install-exec-am'. [ 188s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/man/man8' [ 188s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/man/man8' [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 188s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 188s] make[2]: Nothing to be done for 'install-exec-am'. [ 188s] make[2]: Nothing to be done for 'install-data-am'. [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 188s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/info/dir [ 188s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm -regex '.*\.la$' [ 188s] + xargs rm -f -- [ 188s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm -regex '.*\.a$' [ 188s] + xargs rm -f -- [ 188s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm powertop [ 188s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 188s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 188s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 188s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/help/': No such file or directory [ 188s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 188s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/sbin/powertop [ 189s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 189s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 189s] cpio: glibc-2.20/sysdeps/arm/crti.S: Cannot stat: No such file or directory [ 189s] cpio: glibc-2.20/sysdeps/arm/crtn.S: Cannot stat: No such file or directory [ 189s] cpio: glibc-2.20/sysdeps/arm/start.S: Cannot stat: No such file or directory [ 189s] 1393 blocks [ 189s] + /usr/lib/rpm/check-buildroot [ 189s] + /usr/lib/rpm//brp-compress [ 189s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 189s] + /usr/lib/rpm/brp-python-hardlink [ 189s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm [ 189s] Processing files: powertop-2.5-2.31.armv7l [ 189s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 189s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 189s] [ 189s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5DI9E3 [ 189s] + umask 022 [ 189s] + cd /home/abuild/rpmbuild/BUILD [ 189s] + cd powertop-2.5 [ 189s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/licenses/powertop [ 189s] + export LICENSEDIR [ 189s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/licenses/powertop [ 189s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm/usr/share/licenses/powertop [ 189s] + exit 0 [ 189s] Provides: powertop = 2.5-2.31 powertop(armv7l-32) = 2.5-2.31 [ 189s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 189s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libm.so.6 libm.so.6(GLIBC_2.4) libncursesw.so.5 libnl-genl.so.2 libnl.so.2 libpthread.so.0 libpthread.so.0(GLIBC_2.4) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(CXXABI_ARM_1.3.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.9) libtinfo.so.5 rtld(GNU_HASH) [ 189s] Processing files: powertop-debugsource-2.5-2.31.armv7l [ 189s] Provides: powertop-debugsource = 2.5-2.31 powertop-debugsource(armv7l-32) = 2.5-2.31 [ 189s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 189s] Processing files: powertop-docs-2.5-2.31.armv7l [ 189s] Provides: powertop-docs = 2.5-2.31 powertop-docs(armv7l-32) = 2.5-2.31 [ 189s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 189s] Processing files: powertop-locale-2.5-2.31.noarch [ 189s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-2.31 [ 189s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 189s] Processing files: powertop-debuginfo-2.5-2.31.armv7l [ 189s] Provides: powertop-debuginfo = 2.5-2.31 powertop-debuginfo(armv7l-32) = 2.5-2.31 [ 189s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 189s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm [ 189s] warning: Could not canonicalize hostname: w27 [ 189s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.31.src.rpm [ 189s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-2.5-2.31.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-debugsource-2.5-2.31.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-docs-2.5-2.31.armv7l.rpm [ 190s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.31.noarch.rpm [ 191s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/powertop-debuginfo-2.5-2.31.armv7l.rpm [ 191s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.sgWNlU [ 191s] + umask 022 [ 191s] + cd /home/abuild/rpmbuild/BUILD [ 191s] + cd powertop-2.5 [ 191s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.31.arm [ 191s] + exit 0 [ 191s] ... checking for files with abuild user/group [ 191s] Killing qemu-hang-fix PID=1574 [ 191s] ... creating baselibs [ 192s] ... comparing built packages with the former built [ 192s] /usr/lib/build/pkg-diff.sh [ 192s] compare /.build.oldpackages/powertop-2.5-2.30.src.rpm /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.31.src.rpm [ 192s] This is not a prerelease project. Compare the project name. [ 192s] comparing rpmtags [ 193s] comparing RELEASE [ 193s] comparing PROVIDES [ 193s] comparing scripts [ 193s] comparing filelist [ 193s] comparing file checksum [ 193s] RPM meta information is identical [ 194s] compare /.build.oldpackages/powertop-2.5-2.30.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-2.5-2.31.armv7l.rpm [ 195s] Comparing powertop-2.5-2.30.armv7l.rpm to powertop-2.5-2.31.armv7l.rpm [ 195s] This is not a prerelease project. Compare the project name. [ 195s] comparing rpmtags [ 195s] comparing RELEASE [ 195s] comparing PROVIDES [ 196s] comparing scripts [ 197s] comparing filelist [ 198s] comparing file checksum [ 198s] creating rename script [ 198s] RPM file checksum differs. [ 198s] Extracting packages [ 202s] /usr/sbin/powertop differs in ELF section .rodata [ 202s] --- /tmp/tmp.wXkFaA6538/tmp.TdvMIn6642 2017-03-31 18:38:47.013161996 +0000 [ 202s] +++ /tmp/tmp.wXkFaA6538/tmp.tqPNoF6644 2017-03-31 18:38:47.017161996 +0000 [ 202s] @@ -1551,7 +1551,7 @@ [ 202s] 4dfd0 65000000 63683a43 3a693a74 3a755677 e...ch:C:i:t:uVw [ 202s] 4dfe0 3a710000 506f7765 72544f50 20766572 :q..PowerTOP ver [ 202s] 4dff0 73696f6e 76322e35 2c20636f 6d70696c sionv2.5, compil [ 202s] - 4e000 6564206f 6e204d61 72203233 20323031 ed on Mar 23 201 [ 202s] + 4e000 6564206f 6e204d61 72203331 20323031 ed on Mar 31 201 [ 202s] 4e010 370a0000 55736167 653a2070 6f776572 7...Usage: power [ 202s] 4e020 746f7020 5b4f5054 494f4e53 5d000000 top [OPTIONS]... [ 202s] 4e030 25730a0a 00000000 72756e20 696e2022 %s......run in " [ 202s] compare /.build.oldpackages/powertop-debuginfo-2.5-2.30.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-debuginfo-2.5-2.31.armv7l.rpm [ 202s] skipping -debuginfo package [ 202s] compare /.build.oldpackages/powertop-debugsource-2.5-2.30.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-debugsource-2.5-2.31.armv7l.rpm [ 202s] Comparing powertop-debugsource-2.5-2.30.armv7l.rpm to powertop-debugsource-2.5-2.31.armv7l.rpm [ 202s] This is not a prerelease project. Compare the project name. [ 202s] comparing rpmtags [ 202s] comparing RELEASE [ 203s] comparing PROVIDES [ 203s] comparing scripts [ 203s] comparing filelist [ 203s] comparing file checksum [ 203s] creating rename script [ 203s] RPM meta information is identical [ 203s] compare /.build.oldpackages/powertop-docs-2.5-2.30.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/powertop-docs-2.5-2.31.armv7l.rpm [ 203s] Comparing powertop-docs-2.5-2.30.armv7l.rpm to powertop-docs-2.5-2.31.armv7l.rpm [ 203s] This is not a prerelease project. Compare the project name. [ 203s] comparing rpmtags [ 203s] comparing RELEASE [ 203s] comparing PROVIDES [ 203s] comparing scripts [ 203s] comparing filelist [ 203s] comparing file checksum [ 203s] creating rename script [ 203s] RPM meta information is identical [ 203s] compare /.build.oldpackages/powertop-locale-2.5-2.30.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.31.noarch.rpm [ 204s] Comparing powertop-locale-2.5-2.30.noarch.rpm to powertop-locale-2.5-2.31.noarch.rpm [ 204s] This is not a prerelease project. Compare the project name. [ 204s] comparing rpmtags [ 204s] comparing RELEASE [ 204s] comparing PROVIDES [ 204s] comparing scripts [ 204s] comparing filelist [ 204s] comparing file checksum [ 204s] creating rename script [ 204s] RPM meta information is identical [ 204s] ... saving built statistics [ 204s] ... saving built packages [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/powertop-2.5-2.31.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/powertop-debuginfo-2.5-2.31.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/powertop-debugsource-2.5-2.31.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/armv7l/powertop-docs-2.5-2.31.armv7l.rpm [ 204s] /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.31.noarch.rpm [ 204s] /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.31.src.rpm [ 204s] /home/abuild/rpmbuild/OTHER/_statistics [ 204s] [ 204s] w27 finished "build powertop.spec" at Fri Mar 31 18:38:49 UTC 2017. [ 204s] [ 208s] [ 177.302337] SysRq : Power Off [ 208s] [ 177.309211] Power down. [ 208s] build: extracting built packages... [ 208s] powertop-2.5-2.31.armv7l.rpm [ 208s] powertop-debuginfo-2.5-2.31.armv7l.rpm [ 208s] powertop-debugsource-2.5-2.31.armv7l.rpm [ 208s] powertop-docs-2.5-2.31.armv7l.rpm [ 208s] powertop-locale-2.5-2.31.noarch.rpm [ 208s] powertop-2.5-2.31.src.rpm [ 208s] _statistics