[ 0s] Using BUILD_ROOT=/srv/build/root_3/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_3/root [ 0s] [ 0s] [ 0s] w05 started "build _service:gbs:powertop.spec" at Fri Mar 31 17:02:03 UTC 2017. [ 0s] [ 0s] Building powertop for project 'Tizen:IVI' repository 'emulator' arch 'i586' srcmd5 'ed25272c63ea4e3160c46d92b32cdcdb' [ 0s] [ 0s] processing specfile /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/3/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_3/.build.rpmlist /srv/build/root_3/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 0s] [7/35] preinstalling grep... [ 0s] [8/35] preinstalling libattr... [ 0s] [9/35] preinstalling libbz2... [ 0s] [10/35] preinstalling libcap... [ 0s] [11/35] preinstalling libelf... [ 0s] [12/35] preinstalling libfreebl3... [ 1s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 1s] [32/35] preinstalling util-linux-su... [ 1s] [33/35] preinstalling nss... [ 1s] [34/35] preinstalling libsoftokn3... [ 1s] [35/35] preinstalling rpm... [ 1s] [ 2s] [1/10] preinstalling libext2fs... [ 2s] [2/10] preinstalling libpcre... [ 2s] [3/10] preinstalling libsmartcols... [ 2s] [4/10] preinstalling libuuid... [ 2s] [5/10] preinstalling perl... [ 3s] [6/10] preinstalling procps-ng... [ 3s] [7/10] preinstalling grep... [ 3s] [8/10] preinstalling libblkid... [ 3s] [9/10] preinstalling libmount... [ 3s] [10/10] preinstalling util-linux... [ 3s] copying packages... [ 3s] reordering...cycle: libsoftokn3 -> nss [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] done [ 3s] booting kvm ... [ 3s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 16000 -drive file=/srv/build/root_3/root,if=virtio,cache=none -drive file=/srv/build/root_3/root,if=ide,index=0,cache=none -drive file=/srv/build/root_3/swap,if=virtio,cache=none -smp 8 [ 7s] doing fast boot [ 7s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4394/4194304 files, 297734/16777216 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 9s] 2nd stage started in virtual machine [ 9s] machine type: x86_64 [ 9s] switching personality to 8... [ 9s] 2nd stage started in virtual machine [ 9s] machine type: i686 [ 10s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 10s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 10s] swapon /dev/vdb [ 10s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 11s] mount: none is already mounted or /proc busy [ 11s] mount: none is already mounted or /dev/pts busy [ 11s] logging output to //.build.log... [ 11s] processing specfile /.build-srcdir/_service:gbs:powertop.spec ... [ 11s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 17s] running setup postinstall script [ 17s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 17s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 17s] initializing rpm db... [ 20s] [1/96] installing libmagic-data-5.28-6.1 [ 20s] [2/96] installing setup-0.9-4.4 [ 20s] [3/96] installing terminfo-base-5.9-3.1 [ 21s] [4/96] installing filesystem-3.1-13.1 [ 21s] [5/96] installing glibc-2.20-14.1 [ 22s] [6/96] installing bash-3.2.57-3.4 [ 22s] [7/96] installing cpio-2.11-3.1 [ 22s] [8/96] installing diffutils-3.3-1.11 [ 22s] [9/96] installing findutils-4.3.8-3.2 [ 22s] [10/96] installing hostname-3.12-1.4 [ 22s] [11/96] installing libatomic-4.9.2-21.2 [ 22s] [12/96] installing libattr-2.4.47-2.2 [ 22s] [13/96] installing libbz2-1.0.6-2.33 [ 22s] [14/96] installing libcap-2.24-1.90 [ 22s] [15/96] installing libelf-0.153-6.13 [ 22s] [16/96] installing libext2fs-1.42.13-3.1 [ 22s] [17/96] installing libfreebl3-3.23-6.6 [ 23s] [18/96] installing libgcc-4.9.2-21.2 [ 23s] [19/96] installing libgomp-4.9.2-21.2 [ 23s] [20/96] installing libitm-4.9.2-21.2 [ 23s] [21/96] installing libltdl-2.4.2-3.6 [ 23s] [22/96] installing liblua-5.1.4-1.21 [ 23s] [23/96] installing liblzma-5.2.2-6.1 [ 23s] [24/96] installing libnl2-2.0-3.1 [ 23s] [25/96] installing libpcre-8.39-4.1 [ 23s] [26/96] installing libpopt-1.16-2.6 [ 23s] [27/96] installing libsmack-1.3.0-5.2 [ 23s] [28/96] installing libsmartcols-2.28-9.1 [ 23s] [29/96] installing libsqlite-3.8.10.2-1.11 [ 24s] [30/96] installing libuuid-2.28-9.1 [ 24s] [31/96] installing m4-1.4.17-2.2 [ 24s] [32/96] installing net-tools-2.0_20121208git-1.7 [ 24s] [33/96] installing nspr-4.12-5.10 [ 24s] [34/96] installing patch-2.7-1.8 [ 24s] [35/96] installing pkg-config-0.28-1.9 [ 24s] [36/96] installing sed-4.1c-2.7 [ 24s] [37/96] installing update-alternatives-1.18.15-2.1 [ 24s] [38/96] installing which-2.20-1.4 [ 24s] [39/96] installing zlib-1.2.8-3.1 [ 24s] [40/96] installing libncurses-5.9-3.1 [ 25s] [41/96] installing libncurses6-5.9-3.1 [ 25s] [42/96] installing build-compare-2015.04.28-6.16 [ 25s] [43/96] installing coreutils-6.9-8.2 [ 25s] [44/96] installing cpp-4.9.2-21.2 [ 27s] [45/96] installing gawk-3.1.5-2.8 [ 27s] [46/96] installing gcc-c++-4.9.2-21.2 [ 28s] [47/96] installing grep-2.5.2-2.8 [ 28s] [48/96] installing less-466-1.7 [ 28s] [49/96] installing libacl-2.2.52-3.6 [ 28s] [50/96] installing libasm-0.153-6.13 [ 28s] [51/96] installing libblkid-2.28-9.1 [ 28s] [52/96] installing libnl2-devel-2.0-3.1 [ 28s] [53/96] installing libreadline-5.2-2.6 [ 28s] [54/96] installing libstdc++-4.9.2-21.2 [ 28s] [55/96] installing make-4.0-2.2 [ 28s] [56/96] installing nss-certs-3.23-6.6 [ 28s] [57/96] installing procps-ng-3.3.9-4.1 [ 28s] [58/96] installing smack-1.3.0-5.2 [ 28s] [59/96] installing binutils-2.25-7.10 [ 29s] [60/96] installing bzip2-1.0.6-2.33 [ 29s] [61/96] installing libmagic-5.28-6.1 [ 29s] [62/96] installing libxml2-2.9.4-5.5 [ 29s] [63/96] installing xz-5.2.2-6.1 [ 29s] [64/96] installing ncurses-devel-5.9-3.1 [ 29s] [65/96] installing libdw-0.153-6.13 [ 30s] [66/96] installing libstdc++-devel-4.9.2-21.2 [ 30s] [67/96] installing file-5.28-6.1 [ 30s] [68/96] installing libmount-2.28-9.1 [ 30s] [69/96] installing linux-glibc-devel-3.10-1.5 [ 30s] [70/96] installing tar-1.17-2.8 [ 31s] [71/96] installing db4-4.8.30.NC-2.2 [ 31s] [72/96] installing gettext-runtime-0.19.7-2.6 [ 31s] [73/96] installing glibc-locale-2.20-14.1 [ 31s] [74/96] installing gzip-1.3.12-2.9 [ 31s] [75/96] installing libcilkrts-4.9.2-21.2 [ 31s] [76/96] installing libfdisk1-2.28-9.1 [ 31s] [77/96] installing libubsan-4.9.2-21.2 [ 31s] [78/96] installing pam-1.1.6-5.1 [ 32s] [79/96] installing tzdata-2016i-3.1 [ 32s] [80/96] installing elfutils-0.153-6.13 [ 32s] [81/96] installing glibc-devel-2.20-14.1 [ 32s] [82/96] installing gettext-tools-0.19.7-2.6 [ 33s] [83/96] installing perl-5.20.0-4.3 [ 35s] [84/96] installing gcc-4.9.2-21.2 [ 37s] [85/96] installing util-linux-2.28-9.1 [ 38s] [86/96] installing build-mkbaselibs-20120927-1.4 [ 38s] [87/96] installing autoconf-2.69-1.5 [ 38s] [88/96] installing util-linux-su-2.28-9.1 [ 38s] [89/96] installing zlib-devel-1.2.8-3.1 [ 38s] [90/96] installing automake-1.14.1-1.5 [ 39s] [91/96] installing build-20120927-1.4 [ 39s] [92/96] installing libtool-2.4.2-3.6 [ 39s] [93/96] installing nss-3.23-6.6 [ 39s] [94/96] installing libsoftokn3-3.23-6.6 [ 39s] [95/96] installing rpm-4.11.0.1-13.1 [ 39s] [96/96] installing rpm-build-4.11.0.1-13.1 [ 40s] removing nis flags from //etc/nsswitch.conf... [ 40s] now finalizing build dir... [ 40s] build target is i686-tizen-linux [ 40s] ----------------------------------------------------------------- [ 40s] I have the following modifications for powertop.spec: [ 40s] 4c4 [ 40s] < Release: 1 [ 40s] --- [ 40s] > Release: 2.32 [ 40s] 11c11 [ 40s] < BuildRequires: gettext [ 40s] --- [ 40s] > BuildRequires: gettext-tools [ 40s] 46a47 [ 40s] > %changelog [ 40s] ----------------------------------------------------------------- [ 40s] ----- building powertop.spec (user abuild) [ 40s] ----------------------------------------------------------------- [ 40s] ----------------------------------------------------------------- [ 40s] Running qemu build hang workaround... [ 40s] /bin/ps command found [ 40s] QEMU_HANG_FIX_PID=1094 [ 40s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:IVI/emulator/ed25272c63ea4e3160c46d92b32cdcdb-powertop' /home/abuild/rpmbuild/SOURCES/powertop.spec [ 40s] Building target platforms: i686-tizen-linux [ 40s] Building for target i686-tizen-linux [ 40s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.mbBvPQ [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + rm -rf powertop-2.5 [ 40s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 40s] + /bin/tar -xf - [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd powertop-2.5 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 40s] + exit 0 [ 40s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.uZg6VB [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd powertop-2.5 [ 40s] ++ uname -m [ 40s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + LDFLAGS= [ 40s] + export LDFLAGS [ 40s] + LD_AS_NEEDED=1 [ 40s] + export LD_AS_NEEDED [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 41s] checking for a BSD-compatible install... /bin/install -c [ 41s] checking whether build environment is sane... yes [ 41s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 41s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 41s] configure: WARNING: 'missing' script is too old or missing [ 41s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 41s] checking for gawk... gawk [ 41s] checking whether make sets $(MAKE)... yes [ 41s] checking whether make supports nested variables... yes [ 41s] checking whether make supports nested variables... (cached) yes [ 41s] checking whether NLS is requested... yes [ 41s] checking for msgfmt... /bin/msgfmt [ 41s] checking for gmsgfmt... /bin/msgfmt [ 41s] checking for xgettext... /bin/xgettext [ 41s] checking for msgmerge... /bin/msgmerge [ 41s] checking for style of include used by make... GNU [ 41s] checking for i686-tizen-linux-gnu-gcc... no [ 41s] checking for gcc... gcc [ 41s] checking whether the C compiler works... yes [ 41s] checking for C compiler default output file name... a.out [ 41s] checking for suffix of executables... [ 41s] checking whether we are cross compiling... no [ 41s] checking for suffix of object files... o [ 41s] checking whether we are using the GNU C compiler... yes [ 41s] checking whether gcc accepts -g... yes [ 41s] checking for gcc option to accept ISO C89... none needed [ 41s] checking dependency style of gcc... gcc3 [ 41s] checking build system type... i686-tizen-linux-gnu [ 41s] checking host system type... i686-tizen-linux-gnu [ 41s] checking for ld used by GCC... /usr/i586-tizen-linux-gnu/bin/ld [ 41s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 41s] checking for shared library run path origin... done [ 41s] checking for i686-tizen-linux-gnu-g++... no [ 41s] checking for i686-tizen-linux-gnu-c++... no [ 41s] checking for i686-tizen-linux-gnu-gpp... no [ 41s] checking for i686-tizen-linux-gnu-aCC... no [ 41s] checking for i686-tizen-linux-gnu-CC... no [ 41s] checking for i686-tizen-linux-gnu-cxx... no [ 41s] checking for i686-tizen-linux-gnu-cc++... no [ 41s] checking for i686-tizen-linux-gnu-cl.exe... no [ 41s] checking for i686-tizen-linux-gnu-FCC... no [ 41s] checking for i686-tizen-linux-gnu-KCC... no [ 41s] checking for i686-tizen-linux-gnu-RCC... no [ 41s] checking for i686-tizen-linux-gnu-xlC_r... no [ 41s] checking for i686-tizen-linux-gnu-xlC... no [ 41s] checking for g++... g++ [ 41s] checking whether we are using the GNU C++ compiler... yes [ 41s] checking whether g++ accepts -g... yes [ 41s] checking dependency style of g++... gcc3 [ 41s] checking how to run the C++ preprocessor... g++ -E [ 41s] checking for grep that handles long lines and -e... /bin/grep [ 41s] checking for egrep... /bin/grep -E [ 41s] checking for CFPreferencesCopyAppValue... no [ 41s] checking for CFLocaleCopyCurrent... no [ 41s] checking for GNU gettext in libc... yes [ 41s] checking whether to use NLS... yes [ 41s] checking where the gettext function comes from... libc [ 41s] checking for i686-tizen-linux-gnu-ar... no [ 41s] checking for i686-tizen-linux-gnu-lib... no [ 41s] checking for i686-tizen-linux-gnu-link... no [ 41s] checking for ar... ar [ 41s] checking the archiver (ar) interface... ar [ 41s] checking how to run the C preprocessor... gcc -E [ 41s] checking whether we are using the GNU C++ compiler... (cached) yes [ 41s] checking whether g++ accepts -g... (cached) yes [ 41s] checking dependency style of g++... (cached) gcc3 [ 41s] checking how to print strings... printf [ 41s] checking for a sed that does not truncate output... /bin/sed [ 41s] checking for fgrep... /bin/grep -F [ 41s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 41s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 41s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 41s] checking the name lister (/bin/nm -B) interface... BSD nm [ 41s] checking whether ln -s works... yes [ 41s] checking the maximum length of command line arguments... 1572864 [ 41s] checking whether the shell understands some XSI constructs... yes [ 41s] checking whether the shell understands "+="... yes [ 41s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 41s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 41s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 41s] checking for i686-tizen-linux-gnu-objdump... no [ 41s] checking for objdump... objdump [ 41s] checking how to recognize dependent libraries... pass_all [ 41s] checking for i686-tizen-linux-gnu-dlltool... no [ 41s] checking for dlltool... no [ 41s] checking how to associate runtime and link libraries... printf %s\n [ 41s] checking for i686-tizen-linux-gnu-ar... ar [ 41s] checking for archiver @FILE support... @ [ 41s] checking for i686-tizen-linux-gnu-strip... no [ 41s] checking for strip... strip [ 41s] checking for i686-tizen-linux-gnu-ranlib... no [ 41s] checking for ranlib... ranlib [ 41s] checking command to parse /bin/nm -B output from gcc object... ok [ 41s] checking for sysroot... no [ 41s] checking for i686-tizen-linux-gnu-mt... no [ 41s] checking for mt... no [ 41s] checking if : is a manifest tool... no [ 41s] checking for ANSI C header files... yes [ 41s] checking for sys/types.h... yes [ 41s] checking for sys/stat.h... yes [ 41s] checking for stdlib.h... yes [ 42s] checking for string.h... yes [ 42s] checking for memory.h... yes [ 42s] checking for strings.h... yes [ 42s] checking for inttypes.h... yes [ 42s] checking for stdint.h... yes [ 42s] checking for unistd.h... yes [ 42s] checking for dlfcn.h... yes [ 42s] checking for objdir... .libs [ 42s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 42s] checking for gcc option to produce PIC... -fPIC -DPIC [ 42s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 42s] checking if gcc static flag -static works... no [ 42s] checking if gcc supports -c -o file.o... yes [ 42s] checking if gcc supports -c -o file.o... (cached) yes [ 42s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 42s] checking whether -lc should be explicitly linked in... no [ 42s] checking dynamic linker characteristics... GNU/Linux ld.so [ 42s] checking how to hardcode library paths into programs... immediate [ 42s] checking whether stripping libraries is possible... yes [ 42s] checking if libtool supports shared libraries... yes [ 42s] checking whether to build shared libraries... yes [ 42s] checking whether to build static libraries... no [ 42s] checking how to run the C++ preprocessor... g++ -E [ 42s] checking for ld used by g++... /usr/i586-tizen-linux-gnu/bin/ld [ 42s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 42s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 42s] checking for g++ option to produce PIC... -fPIC -DPIC [ 42s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 42s] checking if g++ static flag -static works... no [ 42s] checking if g++ supports -c -o file.o... yes [ 42s] checking if g++ supports -c -o file.o... (cached) yes [ 42s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 42s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 42s] checking how to hardcode library paths into programs... immediate [ 42s] checking for i686-tizen-linux-gnu-gcc... gcc [ 42s] checking whether we are using the GNU C compiler... (cached) yes [ 42s] checking whether gcc accepts -g... (cached) yes [ 42s] checking for gcc option to accept ISO C89... (cached) none needed [ 42s] checking dependency style of gcc... (cached) gcc3 [ 42s] checking whether gcc and cc understand -c and -o together... yes [ 42s] checking fcntl.h usability... yes [ 42s] checking fcntl.h presence... yes [ 42s] checking for fcntl.h... yes [ 42s] checking libintl.h usability... yes [ 42s] checking libintl.h presence... yes [ 42s] checking for libintl.h... yes [ 42s] checking limits.h usability... yes [ 42s] checking limits.h presence... yes [ 42s] checking for limits.h... yes [ 42s] checking locale.h usability... yes [ 42s] checking locale.h presence... yes [ 42s] checking for locale.h... yes [ 43s] checking malloc.h usability... yes [ 43s] checking malloc.h presence... yes [ 43s] checking for malloc.h... yes [ 43s] checking for stdint.h... (cached) yes [ 43s] checking for stdlib.h... (cached) yes [ 43s] checking for string.h... (cached) yes [ 43s] checking sys/ioctl.h usability... yes [ 43s] checking sys/ioctl.h presence... yes [ 43s] checking for sys/ioctl.h... yes [ 43s] checking sys/socket.h usability... yes [ 43s] checking sys/socket.h presence... yes [ 43s] checking for sys/socket.h... yes [ 43s] checking sys/statfs.h usability... yes [ 43s] checking sys/statfs.h presence... yes [ 43s] checking for sys/statfs.h... yes [ 43s] checking sys/time.h usability... yes [ 43s] checking sys/time.h presence... yes [ 43s] checking for sys/time.h... yes [ 43s] checking termios.h usability... yes [ 43s] checking termios.h presence... yes [ 43s] checking for termios.h... yes [ 43s] checking for unistd.h... (cached) yes [ 43s] checking ncurses.h usability... yes [ 43s] checking ncurses.h presence... yes [ 43s] checking for ncurses.h... yes [ 43s] checking for stdbool.h that conforms to C99... yes [ 43s] checking for _Bool... no [ 43s] checking for inline... inline [ 43s] checking for int64_t... yes [ 43s] checking for pid_t... yes [ 43s] checking for size_t... yes [ 43s] checking for ssize_t... yes [ 43s] checking for uint16_t... yes [ 43s] checking for uint32_t... yes [ 44s] checking for uint64_t... yes [ 44s] checking for stdlib.h... (cached) yes [ 44s] checking for GNU libc compatible malloc... yes [ 44s] checking for stdlib.h... (cached) yes [ 44s] checking for unistd.h... (cached) yes [ 44s] checking for sys/param.h... yes [ 44s] checking for getpagesize... yes [ 44s] checking for working mmap... yes [ 44s] checking for stdlib.h... (cached) yes [ 44s] checking for GNU libc compatible realloc... yes [ 44s] checking for working strtod... yes [ 44s] checking for fdatasync... yes [ 44s] checking for getpagesize... (cached) yes [ 44s] checking for gettimeofday... yes [ 44s] checking for memmove... yes [ 44s] checking for memset... yes [ 44s] checking for mkdir... yes [ 44s] checking for munmap... yes [ 44s] checking for pow... yes [ 44s] checking for realpath... yes [ 44s] checking for regcomp... yes [ 44s] checking for select... yes [ 44s] checking for setlocale... yes [ 44s] checking for socket... yes [ 44s] checking for sqrt... yes [ 44s] checking for strcasecmp... yes [ 45s] checking for strchr... yes [ 45s] checking for strdup... yes [ 45s] checking for strerror... yes [ 45s] checking for strncasecmp... yes [ 45s] checking for strstr... yes [ 45s] checking for strtoul... yes [ 45s] checking for strtoull... yes [ 45s] checking for library containing delwin... -lncursesw [ 45s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 45s] checking pkg-config is at least version 0.9.0... yes [ 45s] checking for PCIUTILS... no [ 45s] checking for library containing pci_get_dev... no [ 45s] checking for LIBNL... no [ 45s] checking for LIBNL... yes [ 45s] configure: WARNING: [ 45s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 45s] If you need or want pci support, please install libpci [ 45s] and re-configure PowerTOP. [ 45s] ********************************************************* [ 45s] [ 45s] checking for library containing pthread_create... -lpthread [ 45s] checking for library containing inet_aton... none required [ 45s] checking that generated files are newer than configure... done [ 45s] configure: creating ./config.status [ 46s] config.status: creating Makefile [ 46s] config.status: creating src/Makefile [ 46s] config.status: creating traceevent/Makefile [ 46s] config.status: creating po/Makefile.in [ 46s] config.status: creating doc/Makefile [ 46s] config.status: creating config.h [ 46s] config.status: executing po-directories commands [ 46s] config.status: creating po/POTFILES [ 46s] config.status: creating po/Makefile [ 46s] config.status: executing depfiles commands [ 46s] config.status: executing libtool commands [ 46s] + make -j8 [ 46s] make all-recursive [ 46s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 46s] Making all in traceevent [ 46s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 46s] CC event-parse.lo [ 46s] CC parse-filter.lo [ 46s] CC parse-utils.lo [ 46s] CC trace-seq.lo [ 46s] event-parse.c: In function '__read_token': [ 46s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 46s] if (asprintf(tok, "%c", ch) < 0) [ 46s] ^ [ 46s] event-parse.c: In function 'pevent_strerror': [ 46s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 46s] msg = strerror_r(errnum, buf, buflen); [ 46s] ^ [ 46s] parse-filter.c: In function 'arg_to_str': [ 46s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 46s] char *op; [ 46s] ^ [ 46s] parse-filter.c: In function 'reparent_op_arg': [ 46s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 46s] *ptr = NULL; [ 46s] ^ [ 46s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 46s] free_arg(other_child); [ 46s] ^ [ 47s] event-parse.c: In function 'pevent_find_event_by_name': [ 47s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 47s] pevent->last_event = event; [ 47s] ^ [ 47s] event-parse.c: In function 'pevent_data_lat_fmt': [ 47s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 47s] trace_seq_printf(s, "%d", migrate_disable); [ 47s] ^ [ 47s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 47s] trace_seq_printf(s, "%d", lock_depth); [ 47s] ^ [ 47s] event-parse.c: In function 'pevent_event_info': [ 47s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 47s] print_str_arg(s, data, size, event, [ 47s] ^ [ 47s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 47s] int len_arg; [ 47s] ^ [ 47s] CCLD libtraceevnet.la [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 47s] Making all in src [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 47s] make all-am [ 47s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 47s] CXX powertop-display.o [ 47s] CXX powertop-devlist.o [ 47s] CXX powertop-lib.o [ 47s] CXX report/powertop-report-maker.o [ 47s] CXX report/powertop-report-formatter-base.o [ 47s] CXX report/powertop-report-formatter-html.o [ 47s] CXX report/powertop-report-formatter-csv.o [ 47s] CXX powertop-main.o [ 47s] In file included from /usr/include/stdio.h:27:0, [ 47s] from report/report-formatter-base.cpp:31: [ 47s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 47s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 47s] ^ [ 47s] In file included from /usr/include/stdio.h:27:0, [ 47s] from report/report-formatter-csv.cpp:31: [ 47s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 47s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 47s] ^ [ 47s] In file included from /usr/include/stdio.h:27:0, [ 47s] from report/report-formatter-html.cpp:31: [ 47s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 47s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 47s] ^ [ 48s] CXX cpu/powertop-intel_gpu.o [ 48s] CXX cpu/powertop-cpu_rapl_device.o [ 48s] CXX cpu/powertop-dram_rapl_device.o [ 48s] CXX devices/powertop-gpu_rapl_device.o [ 48s] CXX parameters/powertop-persistent.o [ 48s] CXX parameters/powertop-learn.o [ 48s] CXX parameters/powertop-parameters.o [ 48s] CXX cpu/powertop-cpu_core.o [ 48s] CXX cpu/powertop-cpudevice.o [ 48s] CXX cpu/powertop-cpu.o [ 48s] CXX cpu/powertop-cpu_linux.o [ 48s] CXX cpu/powertop-abstract_cpu.o [ 48s] CXX cpu/powertop-cpu_package.o [ 48s] CXX cpu/powertop-intel_cpus.o [ 48s] CXX report/powertop-report.o [ 48s] CXX process/powertop-process.o [ 49s] CXX process/powertop-processdevice.o [ 49s] CXX process/powertop-powerconsumer.o [ 49s] CXX process/powertop-timer.o [ 49s] CXX process/powertop-work.o [ 49s] CXX process/powertop-do_process.o [ 49s] CXX process/powertop-interrupt.o [ 49s] CXX perf/powertop-perf.o [ 49s] CXX perf/powertop-perf_bundle.o [ 49s] CXX devices/powertop-i915-gpu.o [ 49s] CXX devices/powertop-device.o [ 49s] CXX devices/powertop-alsa.o [ 49s] CXX devices/powertop-runtime_pm.o [ 49s] CXX devices/powertop-thinkpad-fan.o [ 49s] CXX devices/powertop-usb.o [ 49s] CXX devices/powertop-ahci.o [ 50s] CXX devices/powertop-thinkpad-light.o [ 50s] CXX devices/powertop-rfkill.o [ 50s] CXX devices/powertop-backlight.o [ 50s] CXX devices/powertop-network.o [ 50s] CXX tuning/powertop-bluetooth.o [ 50s] CXX tuning/powertop-cpufreq.o [ 50s] CXX tuning/powertop-tuning.o [ 50s] CXX tuning/powertop-tuningusb.o [ 50s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 50s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 50s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 50s] ^ [ 50s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 50s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 50s] ^ [ 50s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 50s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 50s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 50s] ^ [ 50s] CXX tuning/powertop-ethernet.o [ 50s] CXX tuning/powertop-tunable.o [ 50s] CC tuning/powertop-iw.o [ 50s] CXX tuning/powertop-wifi.o [ 50s] CXX tuning/powertop-tuningsysfs.o [ 50s] CXX tuning/powertop-runtime.o [ 50s] CXX calibrate/powertop-calibrate.o [ 50s] CXX measurement/powertop-measurement.o [ 50s] CXX measurement/powertop-acpi.o [ 50s] CXX measurement/powertop-sysfs.o [ 51s] CXX measurement/powertop-extech.o [ 51s] CXX cpu/rapl/powertop-rapl_interface.o [ 51s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 51s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 51s] ^ [ 51s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 51s] ^ [ 51s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 51s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] write(fd, buffer, 64*1024); [ 51s] ^ [ 51s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 51s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 51s] ^ [ 51s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 51s] ^ [ 51s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 51s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 51s] write(fd, " ", 1); [ 51s] ^ [ 51s] CXXLD powertop [ 52s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] Making all in po [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 52s] Making all in doc [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[2]: Nothing to be done for 'all'. [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] make[2]: Nothing to be done for 'all-am'. [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] + exit 0 [ 52s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.rtkqNT [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd powertop-2.5 [ 52s] + LANG=C [ 52s] + export LANG [ 52s] + unset DISPLAY [ 52s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 [ 52s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 [ 52s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 install [ 52s] Making install in traceevent [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 52s] make[2]: Nothing to be done for 'install-exec-am'. [ 52s] make[2]: Nothing to be done for 'install-data-am'. [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 52s] Making install in src [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] /bin/make install-am [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/sbin' [ 52s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/sbin' [ 52s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/sbin/powertop [ 52s] make[3]: Nothing to be done for 'install-data-am'. [ 52s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 52s] Making install in po [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 52s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 52s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 52s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 52s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 52s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 52s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 52s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 52s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 52s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 52s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 52s] if test "powertop" = "gettext-tools"; then \ [ 52s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/gettext/po; \ [ 52s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 52s] /bin/install -c -m 644 ./$file \ [ 52s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/gettext/po/$file; \ [ 52s] done; \ [ 52s] for file in Makevars; do \ [ 52s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/gettext/po/$file; \ [ 52s] done; \ [ 52s] else \ [ 52s] : ; \ [ 52s] fi [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 52s] Making install in doc [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[2]: Nothing to be done for 'install-exec-am'. [ 52s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/man/man8' [ 52s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/man/man8' [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 52s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] make[2]: Nothing to be done for 'install-exec-am'. [ 52s] make[2]: Nothing to be done for 'install-data-am'. [ 52s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 52s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/info/dir [ 52s] + xargs rm -f -- [ 52s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 -regex '.*\.la$' [ 52s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 -regex '.*\.a$' [ 52s] + xargs rm -f -- [ 52s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 powertop [ 52s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 52s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 52s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 52s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/help/': No such file or directory [ 52s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 52s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/sbin/powertop [ 52s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 52s] cpio: glibc-2.20/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 52s] 1393 blocks [ 52s] + /usr/lib/rpm/check-buildroot [ 52s] + /usr/lib/rpm//brp-compress [ 52s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 52s] + /usr/lib/rpm/brp-python-hardlink [ 52s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 [ 52s] Processing files: powertop-2.5-2.32.i686 [ 52s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 52s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 52s] [ 52s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.2xeV3d [ 52s] + umask 022 [ 52s] + cd /home/abuild/rpmbuild/BUILD [ 52s] + cd powertop-2.5 [ 52s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/licenses/powertop [ 52s] + export LICENSEDIR [ 52s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/licenses/powertop [ 52s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386/usr/share/licenses/powertop [ 52s] + exit 0 [ 52s] Provides: powertop = 2.5-2.32 powertop(x86-32) = 2.5-2.32 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libm.so.6 libm.so.6(GLIBC_2.0) libncursesw.so.5 libnl-genl.so.2 libnl.so.2 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.1) libpthread.so.0(GLIBC_2.2) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.9) libtinfo.so.5 [ 52s] Processing files: powertop-debugsource-2.5-2.32.i686 [ 52s] Provides: powertop-debugsource = 2.5-2.32 powertop-debugsource(x86-32) = 2.5-2.32 [ 52s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 52s] Processing files: powertop-docs-2.5-2.32.i686 [ 52s] Provides: powertop-docs = 2.5-2.32 powertop-docs(x86-32) = 2.5-2.32 [ 52s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 52s] Processing files: powertop-locale-2.5-2.32.noarch [ 52s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-2.32 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Processing files: powertop-debuginfo-2.5-2.32.i686 [ 52s] Provides: powertop-debuginfo = 2.5-2.32 powertop-debuginfo(x86-32) = 2.5-2.32 [ 52s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 52s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 [ 53s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.32.src.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-2.32.i686.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-2.32.i686.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-2.32.i686.rpm [ 53s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.32.noarch.rpm [ 54s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-2.32.i686.rpm [ 54s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.l56ntG [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd powertop-2.5 [ 54s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-2.32.i386 [ 54s] + exit 0 [ 54s] ... checking for files with abuild user/group [ 54s] Killing qemu-hang-fix PID=1094 [ 54s] ... creating baselibs [ 54s] ... comparing built packages with the former built [ 54s] /usr/lib/build/pkg-diff.sh [ 54s] compare /.build.oldpackages/powertop-2.5-2.31.src.rpm /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.32.src.rpm [ 54s] This is not a prerelease project. Compare the project name. [ 54s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] RPM meta information is identical [ 55s] compare /.build.oldpackages/powertop-2.5-2.31.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-2.32.i686.rpm [ 55s] Comparing powertop-2.5-2.31.i686.rpm to powertop-2.5-2.32.i686.rpm [ 55s] This is not a prerelease project. Compare the project name. [ 55s] comparing rpmtags [ 55s] comparing RELEASE [ 55s] comparing PROVIDES [ 55s] comparing scripts [ 55s] comparing filelist [ 55s] comparing file checksum [ 55s] creating rename script [ 55s] RPM file checksum differs. [ 55s] Extracting packages [ 56s] /usr/sbin/powertop differs in ELF section .rodata [ 56s] --- /tmp/tmp.GHXWxA5734/tmp.fukSNs5820 2017-03-31 17:02:59.730132269 +0000 [ 56s] +++ /tmp/tmp.GHXWxA5734/tmp.iYVFPQ5821 2017-03-31 17:02:59.734132268 +0000 [ 56s] @@ -1529,7 +1529,7 @@ [ 56s] 80a0b00 6f662025 64207365 636f6e64 28732920 of %d second(s) [ 56s] 80a0b10 65616368 2e0a0000 506f7765 72544f50 each....PowerTOP [ 56s] 80a0b20 20766572 73696f6e 76322e35 2c20636f versionv2.5, co [ 56s] - 80a0b30 6d70696c 6564206f 6e204d61 72203233 mpiled on Mar 23 [ 56s] + 80a0b30 6d70696c 6564206f 6e204d61 72203331 mpiled on Mar 31 [ 56s] 80a0b40 20323031 370a0000 72756e73 20706f77 2017...runs pow [ 56s] 80a0b50 6572746f 7020696e 2063616c 69627261 ertop in calibra [ 56s] 80a0b60 74696f6e 206d6f64 65000000 53657473 tion mode...Sets [ 56s] compare /.build.oldpackages/powertop-debuginfo-2.5-2.31.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-2.32.i686.rpm [ 57s] skipping -debuginfo package [ 57s] compare /.build.oldpackages/powertop-debugsource-2.5-2.31.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-2.32.i686.rpm [ 57s] Comparing powertop-debugsource-2.5-2.31.i686.rpm to powertop-debugsource-2.5-2.32.i686.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] creating rename script [ 57s] RPM meta information is identical [ 57s] compare /.build.oldpackages/powertop-docs-2.5-2.31.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-2.32.i686.rpm [ 57s] Comparing powertop-docs-2.5-2.31.i686.rpm to powertop-docs-2.5-2.32.i686.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] creating rename script [ 57s] RPM meta information is identical [ 57s] compare /.build.oldpackages/powertop-locale-2.5-2.31.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.32.noarch.rpm [ 57s] Comparing powertop-locale-2.5-2.31.noarch.rpm to powertop-locale-2.5-2.32.noarch.rpm [ 57s] This is not a prerelease project. Compare the project name. [ 57s] comparing rpmtags [ 57s] comparing RELEASE [ 57s] comparing PROVIDES [ 57s] comparing scripts [ 57s] comparing filelist [ 57s] comparing file checksum [ 57s] creating rename script [ 57s] RPM meta information is identical [ 57s] ... saving built statistics [ 57s] ... saving built packages [ 57s] /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-2.32.i686.rpm [ 57s] /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-2.32.i686.rpm [ 57s] /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-2.32.i686.rpm [ 57s] /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-2.32.i686.rpm [ 57s] /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-2.32.noarch.rpm [ 57s] /home/abuild/rpmbuild/SRPMS/powertop-2.5-2.32.src.rpm [ 57s] /home/abuild/rpmbuild/OTHER/_statistics [ 58s] [ 58s] w05 finished "build powertop.spec" at Fri Mar 31 17:03:00 UTC 2017. [ 58s] [ 61s] [ 55.018446] SysRq : Power Off [ 62s] [ 55.340202] Power down. [ 62s] build: extracting built packages... [ 62s] powertop-2.5-2.32.i686.rpm [ 62s] powertop-debuginfo-2.5-2.32.i686.rpm [ 62s] powertop-debugsource-2.5-2.32.i686.rpm [ 62s] powertop-docs-2.5-2.32.i686.rpm [ 62s] powertop-locale-2.5-2.32.noarch.rpm [ 62s] powertop-2.5-2.32.src.rpm [ 62s] _statistics