[ 0s] Using BUILD_ROOT=/srv/build/root_5/.mount [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] Doing kvm build in /srv/build/root_5/root [ 0s] [ 0s] [ 0s] w04 started "build _service:gbs:powertop.spec" at Fri Mar 31 16:59:32 UTC 2017. [ 0s] [ 0s] Building powertop for project 'Tizen:TV' repository 'emulator32-wayland' arch 'i586' srcmd5 '7896ea7afab942215890ee37ee00798c' [ 0s] [ 0s] processing specfile /srv/build/root_5/.build-srcdir/_service:gbs:powertop.spec ... [ 0s] running changelog2spec --target rpm --file /srv/build/root_5/.build-srcdir/_service:gbs:powertop.spec [ 0s] init_buildsystem --configdir /var/run/obs/worker/5/build/configs --cachedir /var/cache/build --prepare --clean --rpmlist /srv/build/root_5/.build.rpmlist /srv/build/root_5/.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 0s] Copying qemu-fix-build-hang.sh [ 0s] cycle: libsoftokn3 -> nss [ 0s] breaking dependency nss -> libsoftokn3 [ 0s] [1/35] preinstalling libmagic-data... [ 0s] [2/35] preinstalling setup... [ 0s] [3/35] preinstalling filesystem... [ 0s] [4/35] preinstalling glibc... [ 0s] [5/35] preinstalling bash... [ 0s] [6/35] preinstalling diffutils... [ 0s] [7/35] preinstalling grep... [ 0s] [8/35] preinstalling libattr... [ 0s] [9/35] preinstalling libbz2... [ 0s] [10/35] preinstalling libcap... [ 0s] [11/35] preinstalling libelf... [ 0s] [12/35] preinstalling libfreebl3... [ 0s] [13/35] preinstalling libgcc... [ 1s] [14/35] preinstalling liblua... [ 1s] [15/35] preinstalling liblzma... [ 1s] [16/35] preinstalling libncurses... [ 1s] [17/35] preinstalling libpopt... [ 1s] [18/35] preinstalling libsmack... [ 1s] [19/35] preinstalling libsqlite... [ 1s] [20/35] preinstalling nspr... [ 1s] [21/35] preinstalling sed... [ 1s] [22/35] preinstalling zlib... [ 1s] [23/35] preinstalling coreutils... [ 1s] [24/35] preinstalling libacl... [ 1s] [25/35] preinstalling libreadline... [ 1s] [26/35] preinstalling smack... [ 1s] [27/35] preinstalling bzip2... [ 1s] [28/35] preinstalling libmagic... [ 1s] [29/35] preinstalling libxml2... [ 1s] [30/35] preinstalling tar... [ 1s] [31/35] preinstalling util-linux... [ 1s] [32/35] preinstalling util-linux-su... [ 1s] [33/35] preinstalling nss... [ 1s] [34/35] preinstalling libsoftokn3... [ 1s] [35/35] preinstalling rpm... [ 1s] [ 2s] [1/10] preinstalling libext2fs... [ 2s] [2/10] preinstalling libpcre... [ 2s] [3/10] preinstalling libsmartcols... [ 2s] [4/10] preinstalling libuuid... [ 2s] [5/10] preinstalling perl... [ 2s] [6/10] preinstalling procps-ng... [ 2s] [7/10] preinstalling grep... [ 3s] [8/10] preinstalling libblkid... [ 3s] [9/10] preinstalling libmount... [ 3s] [10/10] preinstalling util-linux... [ 3s] copying packages... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] booting kvm ... [ 4s] linux64 /usr/bin/qemu-kvm -no-reboot -nographic -vga none -net none -cpu host -kernel /srv/obsw/vmlinuz -initrd /srv/obsw/initrd -append root=/dev/vda panic=1 quiet no-kvmclock nmi_watchdog=0 rw elevator=noop console=ttyS0 init=/.build/build -m 16000 -drive file=/srv/build/root_5/root,if=virtio,cache=none -drive file=/srv/build/root_5/root,if=ide,index=0,cache=none -drive file=/srv/build/root_5/swap,if=virtio,cache=none -smp 8 [ 8s] doing fast boot [ 8s] Creating device nodes with udev [ 8s] Waiting for device /dev/vda to appear: ok [ 8s] fsck from util-linux 2.21.2 [ 8s] [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda [ 8s] /dev/vda: clean, 4394/4194304 files, 297734/16777216 blocks [ 8s] fsck succeeded. Mounting root device read-write. [ 8s] Mounting root /dev/vda [ 8s] mount -o rw -t ext4 /dev/vda /root [ 8s] replacing /etc/mtab with symlink to /proc/self/mounts [ 8s] 2nd stage started in virtual machine [ 8s] machine type: x86_64 [ 8s] switching personality to 8... [ 8s] 2nd stage started in virtual machine [ 8s] machine type: i686 [ 8s] swapon: /dev/vdb: found signature [pagesize=4096, signature=swap] [ 8s] swapon: /dev/vdb: pagesize=4096, swapsize=2147483648, devsize=2147483648 [ 8s] swapon /dev/vdb [ 8s] VM_IMAGE: , VM_SWAP: /dev/vdb [ 8s] mount: none is already mounted or /proc busy [ 8s] mount: none is already mounted or /dev/pts busy [ 8s] logging output to //.build.log... [ 8s] processing specfile /.build-srcdir/_service:gbs:powertop.spec ... [ 8s] init_buildsystem --configdir /.build/configs --cachedir /var/cache/build /.build-srcdir/_service:gbs:powertop.spec build rpmlint-Factory ... [ 8s] running setup postinstall script [ 8s] .init_b_cache/scripts/setup.post: line 1: syntax error near unexpected token `name' [ 8s] .init_b_cache/scripts/setup.post: line 1: `for i, name in ipairs({"passwd", "shadow", "group", "gshadow"}) do' [ 8s] initializing rpm db... [ 9s] [1/96] installing libmagic-data-5.28-6.1 [ 9s] [2/96] installing setup-0.9-4.4 [ 9s] [3/96] installing terminfo-base-5.9-3.1 [ 9s] [4/96] installing filesystem-3.1-13.1 [ 9s] [5/96] installing glibc-2.20-14.1 [ 9s] [6/96] installing bash-3.2.57-3.4 [ 9s] [7/96] installing cpio-2.11-3.1 [ 9s] [8/96] installing diffutils-3.3-1.11 [ 9s] [9/96] installing findutils-4.3.8-3.2 [ 9s] [10/96] installing hostname-3.12-1.4 [ 9s] [11/96] installing libatomic-4.9.2-21.2 [ 9s] [12/96] installing libattr-2.4.47-2.2 [ 9s] [13/96] installing libbz2-1.0.6-2.33 [ 9s] [14/96] installing libcap-2.24-1.90 [ 9s] [15/96] installing libelf-0.153-6.13 [ 9s] [16/96] installing libext2fs-1.42.13-3.1 [ 9s] [17/96] installing libfreebl3-3.23-6.6 [ 9s] [18/96] installing libgcc-4.9.2-21.2 [ 10s] [19/96] installing libgomp-4.9.2-21.2 [ 10s] [20/96] installing libitm-4.9.2-21.2 [ 10s] [21/96] installing libltdl-2.4.2-3.6 [ 10s] [22/96] installing liblua-5.1.4-1.21 [ 10s] [23/96] installing liblzma-5.2.2-6.1 [ 10s] [24/96] installing libnl2-2.0-9.1 [ 10s] [25/96] installing libpcre-8.39-4.1 [ 10s] [26/96] installing libpopt-1.16-2.6 [ 10s] [27/96] installing libsmack-1.3.0-5.2 [ 10s] [28/96] installing libsmartcols-2.28-9.1 [ 10s] [29/96] installing libsqlite-3.8.10.2-1.11 [ 10s] [30/96] installing libuuid-2.28-9.1 [ 10s] [31/96] installing m4-1.4.17-2.2 [ 10s] [32/96] installing net-tools-2.0_20121208git-1.7 [ 10s] [33/96] installing nspr-4.12-5.10 [ 10s] [34/96] installing patch-2.7-1.8 [ 10s] [35/96] installing pkg-config-0.28-1.9 [ 10s] [36/96] installing sed-4.1c-2.7 [ 10s] [37/96] installing update-alternatives-1.18.15-2.1 [ 10s] [38/96] installing which-2.20-1.4 [ 10s] [39/96] installing zlib-1.2.8-3.1 [ 10s] [40/96] installing libncurses-5.9-3.1 [ 10s] [41/96] installing libncurses6-5.9-3.1 [ 10s] [42/96] installing build-compare-2015.04.28-6.16 [ 10s] [43/96] installing coreutils-6.9-8.2 [ 11s] [44/96] installing cpp-4.9.2-21.2 [ 11s] [45/96] installing gawk-3.1.5-2.8 [ 11s] [46/96] installing gcc-c++-4.9.2-21.2 [ 12s] [47/96] installing grep-2.5.2-2.8 [ 12s] [48/96] installing less-466-1.7 [ 12s] [49/96] installing libacl-2.2.52-3.6 [ 12s] [50/96] installing libasm-0.153-6.13 [ 12s] [51/96] installing libblkid-2.28-9.1 [ 12s] [52/96] installing libnl2-devel-2.0-9.1 [ 12s] [53/96] installing libreadline-5.2-2.6 [ 12s] [54/96] installing libstdc++-4.9.2-21.2 [ 12s] [55/96] installing make-4.0-2.2 [ 12s] [56/96] installing nss-certs-3.23-6.6 [ 12s] [57/96] installing procps-ng-3.3.9-4.1 [ 12s] [58/96] installing smack-1.3.0-5.2 [ 12s] [59/96] installing binutils-2.25-7.10 [ 13s] [60/96] installing bzip2-1.0.6-2.33 [ 13s] [61/96] installing libmagic-5.28-6.1 [ 13s] [62/96] installing libxml2-2.9.4-5.5 [ 13s] [63/96] installing xz-5.2.2-6.1 [ 13s] [64/96] installing ncurses-devel-5.9-3.1 [ 13s] [65/96] installing libdw-0.153-6.13 [ 13s] [66/96] installing libstdc++-devel-4.9.2-21.2 [ 13s] [67/96] installing file-5.28-6.1 [ 14s] [68/96] installing libmount-2.28-9.1 [ 14s] [69/96] installing linux-glibc-devel-3.10-1.5 [ 14s] [70/96] installing tar-1.17-2.8 [ 14s] [71/96] installing db4-4.8.30.NC-2.2 [ 14s] [72/96] installing gettext-runtime-0.19.7-2.6 [ 14s] [73/96] installing glibc-locale-2.20-14.1 [ 14s] [74/96] installing gzip-1.3.12-2.9 [ 14s] [75/96] installing libcilkrts-4.9.2-21.2 [ 14s] [76/96] installing libfdisk1-2.28-9.1 [ 14s] [77/96] installing libubsan-4.9.2-21.2 [ 14s] [78/96] installing pam-1.1.6-5.1 [ 15s] [79/96] installing tzdata-2016i-3.1 [ 15s] [80/96] installing elfutils-0.153-6.13 [ 15s] [81/96] installing glibc-devel-2.20-14.1 [ 15s] [82/96] installing gettext-tools-0.19.7-2.6 [ 15s] [83/96] installing perl-5.20.0-4.3 [ 18s] [84/96] installing gcc-4.9.2-21.2 [ 19s] [85/96] installing util-linux-2.28-9.1 [ 20s] [86/96] installing build-mkbaselibs-20120927-1.4 [ 20s] [87/96] installing autoconf-2.69-1.5 [ 20s] [88/96] installing util-linux-su-2.28-9.1 [ 20s] [89/96] installing zlib-devel-1.2.8-3.1 [ 20s] [90/96] installing automake-1.14.1-1.5 [ 20s] [91/96] installing build-20120927-1.4 [ 20s] [92/96] installing libtool-2.4.2-3.6 [ 20s] [93/96] installing nss-3.23-6.6 [ 21s] [94/96] installing libsoftokn3-3.23-6.6 [ 21s] [95/96] installing rpm-4.11.0.1-13.1 [ 21s] [96/96] installing rpm-build-4.11.0.1-13.1 [ 21s] removing nis flags from //etc/nsswitch.conf... [ 21s] now finalizing build dir... [ 22s] build target is i686-tizen-linux [ 22s] ----------------------------------------------------------------- [ 22s] I have the following modifications for powertop.spec: [ 22s] 4c4 [ 22s] < Release: 1 [ 22s] --- [ 22s] > Release: 7.33 [ 22s] 11c11 [ 22s] < BuildRequires: gettext [ 22s] --- [ 22s] > BuildRequires: gettext-tools [ 22s] 46a47 [ 22s] > %changelog [ 22s] ----------------------------------------------------------------- [ 22s] ----- building powertop.spec (user abuild) [ 22s] ----------------------------------------------------------------- [ 22s] ----------------------------------------------------------------- [ 22s] Running qemu build hang workaround... [ 22s] /bin/ps command found [ 22s] QEMU_HANG_FIX_PID=1076 [ 22s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://build.tizen.org/Tizen:TV/emulator32-wayland/7896ea7afab942215890ee37ee00798c-powertop' /home/abuild/rpmbuild/SOURCES/powertop.spec [ 22s] Building target platforms: i686-tizen-linux [ 22s] Building for target i686-tizen-linux [ 22s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HC7gml [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + rm -rf powertop-2.5 [ 22s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/powertop-2.5.tar.gz [ 22s] + /bin/tar -xf - [ 22s] + STATUS=0 [ 22s] + '[' 0 -ne 0 ']' [ 22s] + cd powertop-2.5 [ 22s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 22s] + cp /home/abuild/rpmbuild/SOURCES/powertop.manifest . [ 22s] + exit 0 [ 22s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.MDkREd [ 22s] + umask 022 [ 22s] + cd /home/abuild/rpmbuild/BUILD [ 22s] + cd powertop-2.5 [ 22s] ++ uname -m [ 22s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 22s] + LANG=C [ 22s] + export LANG [ 22s] + unset DISPLAY [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + LDFLAGS= [ 22s] + export LDFLAGS [ 22s] + LD_AS_NEEDED=1 [ 22s] + export LD_AS_NEEDED [ 22s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CFLAGS [ 22s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 22s] + export CXXFLAGS [ 22s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -Wformat-security -fmessage-length=0 -Wl,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 22s] + export FFLAGS [ 22s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static [ 23s] checking for a BSD-compatible install... /bin/install -c [ 23s] checking whether build environment is sane... yes [ 23s] /home/abuild/rpmbuild/BUILD/powertop-2.5/missing: Unknown `--is-lightweight' option [ 23s] Try `/home/abuild/rpmbuild/BUILD/powertop-2.5/missing --help' for more information [ 23s] configure: WARNING: 'missing' script is too old or missing [ 23s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 23s] checking for gawk... gawk [ 23s] checking whether make sets $(MAKE)... yes [ 23s] checking whether make supports nested variables... yes [ 23s] checking whether make supports nested variables... (cached) yes [ 23s] checking whether NLS is requested... yes [ 23s] checking for msgfmt... /bin/msgfmt [ 23s] checking for gmsgfmt... /bin/msgfmt [ 23s] checking for xgettext... /bin/xgettext [ 23s] checking for msgmerge... /bin/msgmerge [ 23s] checking for style of include used by make... GNU [ 23s] checking for i686-tizen-linux-gnu-gcc... no [ 23s] checking for gcc... gcc [ 23s] checking whether the C compiler works... yes [ 23s] checking for C compiler default output file name... a.out [ 23s] checking for suffix of executables... [ 23s] checking whether we are cross compiling... no [ 23s] checking for suffix of object files... o [ 23s] checking whether we are using the GNU C compiler... yes [ 23s] checking whether gcc accepts -g... yes [ 23s] checking for gcc option to accept ISO C89... none needed [ 23s] checking dependency style of gcc... gcc3 [ 23s] checking build system type... i686-tizen-linux-gnu [ 23s] checking host system type... i686-tizen-linux-gnu [ 23s] checking for ld used by GCC... /usr/i586-tizen-linux-gnu/bin/ld [ 23s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 23s] checking for shared library run path origin... done [ 23s] checking for i686-tizen-linux-gnu-g++... no [ 23s] checking for i686-tizen-linux-gnu-c++... no [ 23s] checking for i686-tizen-linux-gnu-gpp... no [ 23s] checking for i686-tizen-linux-gnu-aCC... no [ 23s] checking for i686-tizen-linux-gnu-CC... no [ 23s] checking for i686-tizen-linux-gnu-cxx... no [ 23s] checking for i686-tizen-linux-gnu-cc++... no [ 23s] checking for i686-tizen-linux-gnu-cl.exe... no [ 23s] checking for i686-tizen-linux-gnu-FCC... no [ 23s] checking for i686-tizen-linux-gnu-KCC... no [ 23s] checking for i686-tizen-linux-gnu-RCC... no [ 23s] checking for i686-tizen-linux-gnu-xlC_r... no [ 23s] checking for i686-tizen-linux-gnu-xlC... no [ 23s] checking for g++... g++ [ 23s] checking whether we are using the GNU C++ compiler... yes [ 23s] checking whether g++ accepts -g... yes [ 23s] checking dependency style of g++... gcc3 [ 23s] checking how to run the C++ preprocessor... g++ -E [ 23s] checking for grep that handles long lines and -e... /bin/grep [ 23s] checking for egrep... /bin/grep -E [ 23s] checking for CFPreferencesCopyAppValue... no [ 23s] checking for CFLocaleCopyCurrent... no [ 23s] checking for GNU gettext in libc... yes [ 23s] checking whether to use NLS... yes [ 23s] checking where the gettext function comes from... libc [ 23s] checking for i686-tizen-linux-gnu-ar... no [ 23s] checking for i686-tizen-linux-gnu-lib... no [ 23s] checking for i686-tizen-linux-gnu-link... no [ 23s] checking for ar... ar [ 23s] checking the archiver (ar) interface... ar [ 23s] checking how to run the C preprocessor... gcc -E [ 23s] checking whether we are using the GNU C++ compiler... (cached) yes [ 23s] checking whether g++ accepts -g... (cached) yes [ 23s] checking dependency style of g++... (cached) gcc3 [ 23s] checking how to print strings... printf [ 23s] checking for a sed that does not truncate output... /bin/sed [ 23s] checking for fgrep... /bin/grep -F [ 23s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 23s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 23s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 23s] checking the name lister (/bin/nm -B) interface... BSD nm [ 23s] checking whether ln -s works... yes [ 23s] checking the maximum length of command line arguments... 1572864 [ 23s] checking whether the shell understands some XSI constructs... yes [ 23s] checking whether the shell understands "+="... yes [ 23s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 23s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 23s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 23s] checking for i686-tizen-linux-gnu-objdump... no [ 23s] checking for objdump... objdump [ 23s] checking how to recognize dependent libraries... pass_all [ 23s] checking for i686-tizen-linux-gnu-dlltool... no [ 23s] checking for dlltool... no [ 23s] checking how to associate runtime and link libraries... printf %s\n [ 23s] checking for i686-tizen-linux-gnu-ar... ar [ 23s] checking for archiver @FILE support... @ [ 23s] checking for i686-tizen-linux-gnu-strip... no [ 23s] checking for strip... strip [ 23s] checking for i686-tizen-linux-gnu-ranlib... no [ 23s] checking for ranlib... ranlib [ 23s] checking command to parse /bin/nm -B output from gcc object... ok [ 23s] checking for sysroot... no [ 23s] checking for i686-tizen-linux-gnu-mt... no [ 23s] checking for mt... no [ 23s] checking if : is a manifest tool... no [ 23s] checking for ANSI C header files... yes [ 24s] checking for sys/types.h... yes [ 24s] checking for sys/stat.h... yes [ 24s] checking for stdlib.h... yes [ 24s] checking for string.h... yes [ 24s] checking for memory.h... yes [ 24s] checking for strings.h... yes [ 24s] checking for inttypes.h... yes [ 24s] checking for stdint.h... yes [ 24s] checking for unistd.h... yes [ 24s] checking for dlfcn.h... yes [ 24s] checking for objdir... .libs [ 24s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 24s] checking for gcc option to produce PIC... -fPIC -DPIC [ 24s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 24s] checking if gcc static flag -static works... no [ 24s] checking if gcc supports -c -o file.o... yes [ 24s] checking if gcc supports -c -o file.o... (cached) yes [ 24s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 24s] checking whether -lc should be explicitly linked in... no [ 24s] checking dynamic linker characteristics... GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking whether stripping libraries is possible... yes [ 24s] checking if libtool supports shared libraries... yes [ 24s] checking whether to build shared libraries... yes [ 24s] checking whether to build static libraries... no [ 24s] checking how to run the C++ preprocessor... g++ -E [ 24s] checking for ld used by g++... /usr/i586-tizen-linux-gnu/bin/ld [ 24s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 24s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 24s] checking for g++ option to produce PIC... -fPIC -DPIC [ 24s] checking if g++ PIC flag -fPIC -DPIC works... yes [ 24s] checking if g++ static flag -static works... no [ 24s] checking if g++ supports -c -o file.o... yes [ 24s] checking if g++ supports -c -o file.o... (cached) yes [ 24s] checking whether the g++ linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 24s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 24s] checking how to hardcode library paths into programs... immediate [ 24s] checking for i686-tizen-linux-gnu-gcc... gcc [ 24s] checking whether we are using the GNU C compiler... (cached) yes [ 24s] checking whether gcc accepts -g... (cached) yes [ 24s] checking for gcc option to accept ISO C89... (cached) none needed [ 24s] checking dependency style of gcc... (cached) gcc3 [ 25s] checking whether gcc and cc understand -c and -o together... yes [ 25s] checking fcntl.h usability... yes [ 25s] checking fcntl.h presence... yes [ 25s] checking for fcntl.h... yes [ 25s] checking libintl.h usability... yes [ 25s] checking libintl.h presence... yes [ 25s] checking for libintl.h... yes [ 25s] checking limits.h usability... yes [ 25s] checking limits.h presence... yes [ 25s] checking for limits.h... yes [ 25s] checking locale.h usability... yes [ 25s] checking locale.h presence... yes [ 25s] checking for locale.h... yes [ 25s] checking malloc.h usability... yes [ 25s] checking malloc.h presence... yes [ 25s] checking for malloc.h... yes [ 25s] checking for stdint.h... (cached) yes [ 25s] checking for stdlib.h... (cached) yes [ 25s] checking for string.h... (cached) yes [ 25s] checking sys/ioctl.h usability... yes [ 25s] checking sys/ioctl.h presence... yes [ 25s] checking for sys/ioctl.h... yes [ 25s] checking sys/socket.h usability... yes [ 25s] checking sys/socket.h presence... yes [ 25s] checking for sys/socket.h... yes [ 25s] checking sys/statfs.h usability... yes [ 25s] checking sys/statfs.h presence... yes [ 25s] checking for sys/statfs.h... yes [ 25s] checking sys/time.h usability... yes [ 25s] checking sys/time.h presence... yes [ 25s] checking for sys/time.h... yes [ 25s] checking termios.h usability... yes [ 25s] checking termios.h presence... yes [ 25s] checking for termios.h... yes [ 25s] checking for unistd.h... (cached) yes [ 25s] checking ncurses.h usability... yes [ 25s] checking ncurses.h presence... yes [ 25s] checking for ncurses.h... yes [ 25s] checking for stdbool.h that conforms to C99... yes [ 25s] checking for _Bool... no [ 25s] checking for inline... inline [ 25s] checking for int64_t... yes [ 26s] checking for pid_t... yes [ 26s] checking for size_t... yes [ 26s] checking for ssize_t... yes [ 26s] checking for uint16_t... yes [ 26s] checking for uint32_t... yes [ 26s] checking for uint64_t... yes [ 26s] checking for stdlib.h... (cached) yes [ 26s] checking for GNU libc compatible malloc... yes [ 26s] checking for stdlib.h... (cached) yes [ 26s] checking for unistd.h... (cached) yes [ 26s] checking for sys/param.h... yes [ 26s] checking for getpagesize... yes [ 26s] checking for working mmap... yes [ 26s] checking for stdlib.h... (cached) yes [ 26s] checking for GNU libc compatible realloc... yes [ 26s] checking for working strtod... yes [ 26s] checking for fdatasync... yes [ 26s] checking for getpagesize... (cached) yes [ 26s] checking for gettimeofday... yes [ 27s] checking for memmove... yes [ 27s] checking for memset... yes [ 27s] checking for mkdir... yes [ 27s] checking for munmap... yes [ 27s] checking for pow... yes [ 27s] checking for realpath... yes [ 27s] checking for regcomp... yes [ 27s] checking for select... yes [ 27s] checking for setlocale... yes [ 27s] checking for socket... yes [ 27s] checking for sqrt... yes [ 27s] checking for strcasecmp... yes [ 27s] checking for strchr... yes [ 27s] checking for strdup... yes [ 27s] checking for strerror... yes [ 27s] checking for strncasecmp... yes [ 27s] checking for strstr... yes [ 27s] checking for strtoul... yes [ 27s] checking for strtoull... yes [ 27s] checking for library containing delwin... -lncursesw [ 27s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 27s] checking pkg-config is at least version 0.9.0... yes [ 27s] checking for PCIUTILS... no [ 28s] checking for library containing pci_get_dev... no [ 28s] checking for LIBNL... no [ 28s] checking for LIBNL... yes [ 28s] configure: WARNING: [ 28s] ************* LIBPCI SUPPORT NOT CONFIGURED************** [ 28s] If you need or want pci support, please install libpci [ 28s] and re-configure PowerTOP. [ 28s] ********************************************************* [ 28s] [ 28s] checking for library containing pthread_create... -lpthread [ 28s] checking for library containing inet_aton... none required [ 28s] checking that generated files are newer than configure... done [ 28s] configure: creating ./config.status [ 28s] config.status: creating Makefile [ 28s] config.status: creating src/Makefile [ 28s] config.status: creating traceevent/Makefile [ 28s] config.status: creating po/Makefile.in [ 28s] config.status: creating doc/Makefile [ 28s] config.status: creating config.h [ 28s] config.status: executing po-directories commands [ 28s] config.status: creating po/POTFILES [ 28s] config.status: creating po/Makefile [ 28s] config.status: executing depfiles commands [ 28s] config.status: executing libtool commands [ 28s] + make -j8 [ 28s] make all-recursive [ 28s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 28s] Making all in traceevent [ 28s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 28s] CC event-parse.lo [ 28s] CC parse-filter.lo [ 28s] CC parse-utils.lo [ 28s] CC trace-seq.lo [ 29s] event-parse.c: In function '__read_token': [ 29s] event-parse.c:854:3: warning: implicit declaration of function 'asprintf' [-Wimplicit-function-declaration] [ 29s] if (asprintf(tok, "%c", ch) < 0) [ 29s] ^ [ 29s] event-parse.c: In function 'pevent_strerror': [ 29s] event-parse.c:5118:7: warning: assignment makes pointer from integer without a cast [ 29s] msg = strerror_r(errnum, buf, buflen); [ 29s] ^ [ 29s] parse-filter.c: In function 'arg_to_str': [ 29s] parse-filter.c:2034:8: warning: 'op' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] char *op; [ 29s] ^ [ 29s] parse-filter.c: In function 'reparent_op_arg': [ 29s] parse-filter.c:752:7: warning: 'ptr' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] *ptr = NULL; [ 29s] ^ [ 29s] parse-filter.c:756:3: warning: 'other_child' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 29s] free_arg(other_child); [ 29s] ^ [ 30s] event-parse.c: In function 'pevent_find_event_by_name': [ 30s] event-parse.c:3225:21: warning: 'event' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 30s] pevent->last_event = event; [ 30s] ^ [ 30s] event-parse.c: In function 'pevent_data_lat_fmt': [ 30s] event-parse.c:4352:4: warning: 'migrate_disable' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 30s] trace_seq_printf(s, "%d", migrate_disable); [ 30s] ^ [ 30s] event-parse.c:4359:4: warning: 'lock_depth' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 30s] trace_seq_printf(s, "%d", lock_depth); [ 30s] ^ [ 30s] event-parse.c: In function 'pevent_event_info': [ 30s] event-parse.c:4259:5: warning: 'len_arg' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 30s] print_str_arg(s, data, size, event, [ 30s] ^ [ 30s] event-parse.c:4056:6: note: 'len_arg' was declared here [ 30s] int len_arg; [ 30s] ^ [ 30s] CCLD libtraceevnet.la [ 30s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 30s] Making all in src [ 30s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 30s] make all-am [ 30s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 30s] CXX powertop-display.o [ 30s] CXX powertop-devlist.o [ 30s] CXX powertop-lib.o [ 30s] CXX report/powertop-report-maker.o [ 30s] CXX report/powertop-report-formatter-csv.o [ 30s] CXX report/powertop-report-formatter-html.o [ 30s] CXX report/powertop-report-formatter-base.o [ 30s] CXX powertop-main.o [ 30s] In file included from /usr/include/stdio.h:27:0, [ 30s] from report/report-formatter-csv.cpp:31: [ 30s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 30s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 30s] ^ [ 30s] In file included from /usr/include/stdio.h:27:0, [ 30s] from report/report-formatter-html.cpp:31: [ 30s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 30s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 30s] ^ [ 30s] In file included from /usr/include/stdio.h:27:0, [ 30s] from report/report-formatter-base.cpp:31: [ 30s] /usr/include/features.h:148:3: warning: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [-Wcpp] [ 30s] # warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use _DEFAULT_SOURCE" [ 30s] ^ [ 30s] CXX cpu/powertop-intel_gpu.o [ 30s] CXX cpu/powertop-cpu_rapl_device.o [ 30s] CXX cpu/powertop-dram_rapl_device.o [ 30s] CXX devices/powertop-gpu_rapl_device.o [ 31s] CXX parameters/powertop-persistent.o [ 31s] CXX parameters/powertop-learn.o [ 31s] CXX parameters/powertop-parameters.o [ 31s] CXX cpu/powertop-cpu_core.o [ 31s] CXX cpu/powertop-cpudevice.o [ 31s] CXX cpu/powertop-cpu.o [ 31s] CXX cpu/powertop-cpu_linux.o [ 31s] CXX cpu/powertop-abstract_cpu.o [ 31s] CXX cpu/powertop-cpu_package.o [ 31s] CXX cpu/powertop-intel_cpus.o [ 31s] CXX report/powertop-report.o [ 31s] CXX process/powertop-process.o [ 31s] CXX process/powertop-processdevice.o [ 32s] CXX process/powertop-powerconsumer.o [ 32s] CXX process/powertop-timer.o [ 32s] CXX process/powertop-work.o [ 32s] CXX process/powertop-do_process.o [ 32s] CXX process/powertop-interrupt.o [ 32s] CXX perf/powertop-perf.o [ 32s] CXX perf/powertop-perf_bundle.o [ 32s] CXX devices/powertop-i915-gpu.o [ 32s] CXX devices/powertop-device.o [ 32s] CXX devices/powertop-alsa.o [ 32s] CXX devices/powertop-runtime_pm.o [ 32s] CXX devices/powertop-thinkpad-fan.o [ 32s] CXX devices/powertop-usb.o [ 32s] CXX devices/powertop-ahci.o [ 32s] CXX devices/powertop-thinkpad-light.o [ 33s] CXX devices/powertop-rfkill.o [ 33s] CXX devices/powertop-backlight.o [ 33s] CXX devices/powertop-network.o [ 33s] CXX tuning/powertop-bluetooth.o [ 33s] CXX tuning/powertop-cpufreq.o [ 33s] CXX tuning/powertop-tuning.o [ 33s] tuning/bluetooth.cpp: In member function 'virtual void bt_tunable::toggle()': [ 33s] tuning/bluetooth.cpp:179:55: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/usr/sbin/hciconfig hci0 up &> /dev/null &"); [ 33s] ^ [ 33s] tuning/bluetooth.cpp:182:54: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/usr/sbin/hciconfig hci0 down &> /dev/null"); [ 33s] ^ [ 33s] tuning/cpufreq.cpp: In member function 'virtual void cpufreq_tunable::toggle()': [ 33s] tuning/cpufreq.cpp:119:60: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 33s] system("/sbin/modprobe cpufreq_ondemand > /dev/null 2>&1"); [ 33s] ^ [ 33s] CXX tuning/powertop-tuningusb.o [ 33s] CXX tuning/powertop-ethernet.o [ 33s] CXX tuning/powertop-tunable.o [ 33s] CC tuning/powertop-iw.o [ 33s] CXX tuning/powertop-wifi.o [ 33s] CXX tuning/powertop-tuningsysfs.o [ 33s] CXX tuning/powertop-runtime.o [ 33s] CXX calibrate/powertop-calibrate.o [ 33s] CXX measurement/powertop-measurement.o [ 33s] CXX measurement/powertop-acpi.o [ 33s] CXX measurement/powertop-sysfs.o [ 33s] CXX measurement/powertop-extech.o [ 33s] CXX cpu/rapl/powertop-rapl_interface.o [ 34s] calibrate/calibrate.cpp: In function 'void idle_calibration()': [ 34s] calibrate/calibrate.cpp:361:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp:363:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp: In function 'void* burn_disk(void*)': [ 34s] calibrate/calibrate.cpp:242:29: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(fd, buffer, 64*1024); [ 34s] ^ [ 34s] calibrate/calibrate.cpp: In function 'void backlight_calibration()': [ 34s] calibrate/calibrate.cpp:353:51: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force off"); [ 34s] ^ [ 34s] calibrate/calibrate.cpp:355:50: warning: ignoring return value of 'int system(const char*)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] system("DISPLAY=:0 /usr/bin/xset dpms force on"); [ 34s] ^ [ 34s] measurement/extech.cpp: In member function 'void extech_power_meter::measure()': [ 34s] measurement/extech.cpp:290:19: warning: ignoring return value of 'ssize_t write(int, const void*, size_t)', declared with attribute warn_unused_result [-Wunused-result] [ 34s] write(fd, " ", 1); [ 34s] ^ [ 34s] CXXLD powertop [ 34s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 34s] Making all in po [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 34s] Making all in doc [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 34s] make[2]: Nothing to be done for 'all'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 34s] + exit 0 [ 34s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PvXQrF [ 34s] + umask 022 [ 34s] + cd /home/abuild/rpmbuild/BUILD [ 34s] + cd powertop-2.5 [ 34s] + LANG=C [ 34s] + export LANG [ 34s] + unset DISPLAY [ 34s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 [ 34s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 [ 34s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 install [ 34s] Making install in traceevent [ 34s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[2]: Nothing to be done for 'install-exec-am'. [ 34s] make[2]: Nothing to be done for 'install-data-am'. [ 34s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/traceevent' [ 34s] Making install in src [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] /bin/make install-am [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/sbin' [ 35s] /bin/sh ../libtool --mode=install /bin/install -c powertop '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/sbin' [ 35s] libtool: install: /bin/install -c powertop /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/sbin/powertop [ 35s] make[3]: Nothing to be done for 'install-data-am'. [ 35s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/src' [ 35s] Making install in po [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 35s] installing ca.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/ca/LC_MESSAGES/powertop.mo [ 35s] installing cs_CZ.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/cs_CZ/LC_MESSAGES/powertop.mo [ 35s] installing de_DE.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/de_DE/LC_MESSAGES/powertop.mo [ 35s] installing en_GB.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/en_GB/LC_MESSAGES/powertop.mo [ 35s] installing en_US.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/en_US/LC_MESSAGES/powertop.mo [ 35s] installing es_ES.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/es_ES/LC_MESSAGES/powertop.mo [ 35s] installing hu_HU.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo [ 35s] installing id_ID.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/id_ID/LC_MESSAGES/powertop.mo [ 35s] installing nl_NL.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo [ 35s] installing zh_TW.gmo as /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/locale/zh_TW/LC_MESSAGES/powertop.mo [ 35s] if test "powertop" = "gettext-tools"; then \ [ 35s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/gettext/po; \ [ 35s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 35s] /bin/install -c -m 644 ./$file \ [ 35s] /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/gettext/po/$file; \ [ 35s] done; \ [ 35s] for file in Makevars; do \ [ 35s] rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/gettext/po/$file; \ [ 35s] done; \ [ 35s] else \ [ 35s] : ; \ [ 35s] fi [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/po' [ 35s] Making install in doc [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[2]: Nothing to be done for 'install-exec-am'. [ 35s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/man/man8' [ 35s] /bin/install -c -m 644 powertop.8 '/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/man/man8' [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5/doc' [ 35s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[2]: Nothing to be done for 'install-exec-am'. [ 35s] make[2]: Nothing to be done for 'install-data-am'. [ 35s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/powertop-2.5' [ 35s] + rm -f /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/info/dir [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 -regex '.*\.la$' [ 35s] + xargs rm -f -- [ 35s] + find /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 -regex '.*\.a$' [ 35s] + xargs rm -f -- [ 35s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 powertop [ 35s] removing translation /usr/share/locale/id_ID/LC_MESSAGES/powertop.mo: 125 translated messages. [ 35s] removing translation /usr/share/locale/nl_NL/LC_MESSAGES/powertop.mo: 24 translated messages. [ 35s] removing translation /usr/share/locale/hu_HU/LC_MESSAGES/powertop.mo: 118 translated messages. [ 35s] find: `/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/help/': No such file or directory [ 35s] + /usr/lib/rpm/find-debuginfo.sh /home/abuild/rpmbuild/BUILD/powertop-2.5 [ 35s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/sbin/powertop [ 35s] cpio: glibc-2.20/csu: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/csu/init.c: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/i386/crti.S: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/i386/crtn.S: Cannot stat: No such file or directory [ 35s] cpio: glibc-2.20/sysdeps/i386/start.S: Cannot stat: No such file or directory [ 35s] 1393 blocks [ 35s] + /usr/lib/rpm/check-buildroot [ 35s] + /usr/lib/rpm//brp-compress [ 35s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 35s] + /usr/lib/rpm/brp-python-hardlink [ 35s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 [ 35s] Processing files: powertop-2.5-7.33.i686 [ 35s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 35s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 35s] [ 35s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.7oP9L9 [ 35s] + umask 022 [ 35s] + cd /home/abuild/rpmbuild/BUILD [ 35s] + cd powertop-2.5 [ 35s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/licenses/powertop [ 35s] + export LICENSEDIR [ 35s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/licenses/powertop [ 35s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386/usr/share/licenses/powertop [ 35s] + exit 0 [ 35s] Provides: powertop = 2.5-7.33 powertop(x86-32) = 2.5-7.33 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libm.so.6 libm.so.6(GLIBC_2.0) libncursesw.so.5 libnl-genl.so.2 libnl.so.2 libpthread.so.0 libpthread.so.0(GLIBC_2.0) libpthread.so.0(GLIBC_2.1) libpthread.so.0(GLIBC_2.2) libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) libstdc++.so.6(GLIBCXX_3.4.11) libstdc++.so.6(GLIBCXX_3.4.9) libtinfo.so.5 [ 35s] Processing files: powertop-debugsource-2.5-7.33.i686 [ 35s] Provides: powertop-debugsource = 2.5-7.33 powertop-debugsource(x86-32) = 2.5-7.33 [ 35s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 35s] Processing files: powertop-docs-2.5-7.33.i686 [ 35s] Provides: powertop-docs = 2.5-7.33 powertop-docs(x86-32) = 2.5-7.33 [ 35s] Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1 rpmlib(CompressedFileNames) <= 3.0.4-1 [ 35s] Processing files: powertop-locale-2.5-7.33.noarch [ 35s] Provides: powertop-lang-all = 2.5 powertop-locale = 2.5-7.33 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Processing files: powertop-debuginfo-2.5-7.33.i686 [ 35s] Provides: powertop-debuginfo = 2.5-7.33 powertop-debuginfo(x86-32) = 2.5-7.33 [ 35s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 35s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 [ 35s] Wrote: /home/abuild/rpmbuild/SRPMS/powertop-2.5-7.33.src.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-7.33.i686.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-7.33.i686.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-7.33.i686.rpm [ 36s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-7.33.noarch.rpm [ 37s] Wrote: /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-7.33.i686.rpm [ 37s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6iircL [ 37s] + umask 022 [ 37s] + cd /home/abuild/rpmbuild/BUILD [ 37s] + cd powertop-2.5 [ 37s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/powertop-2.5-7.33.i386 [ 37s] + exit 0 [ 37s] ... checking for files with abuild user/group [ 37s] Killing qemu-hang-fix PID=1076 [ 37s] ... creating baselibs [ 37s] ... comparing built packages with the former built [ 37s] /usr/lib/build/pkg-diff.sh [ 37s] compare /.build.oldpackages/powertop-2.5-7.32.src.rpm /home/abuild/rpmbuild/SRPMS/powertop-2.5-7.33.src.rpm [ 38s] This is not a prerelease project. Compare the project name. [ 38s] comparing rpmtags [ 38s] comparing RELEASE [ 38s] comparing PROVIDES [ 38s] comparing scripts [ 38s] comparing filelist [ 38s] comparing file checksum [ 38s] RPM meta information is identical [ 38s] compare /.build.oldpackages/powertop-2.5-7.32.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-7.33.i686.rpm [ 38s] Comparing powertop-2.5-7.32.i686.rpm to powertop-2.5-7.33.i686.rpm [ 38s] This is not a prerelease project. Compare the project name. [ 38s] comparing rpmtags [ 38s] comparing RELEASE [ 38s] comparing PROVIDES [ 38s] comparing scripts [ 38s] comparing filelist [ 38s] comparing file checksum [ 38s] creating rename script [ 38s] RPM file checksum differs. [ 38s] Extracting packages [ 40s] /usr/sbin/powertop differs in ELF section .rodata [ 40s] --- /tmp/tmp.cEiTnU5725/tmp.JzSPLa5811 2017-03-31 17:00:11.453986719 +0000 [ 40s] +++ /tmp/tmp.cEiTnU5725/tmp.sPARJv5812 2017-03-31 17:00:11.461986719 +0000 [ 40s] @@ -1529,7 +1529,7 @@ [ 40s] 80a0b00 6f662025 64207365 636f6e64 28732920 of %d second(s) [ 40s] 80a0b10 65616368 2e0a0000 506f7765 72544f50 each....PowerTOP [ 40s] 80a0b20 20766572 73696f6e 76322e35 2c20636f versionv2.5, co [ 40s] - 80a0b30 6d70696c 6564206f 6e204d61 72203233 mpiled on Mar 23 [ 40s] + 80a0b30 6d70696c 6564206f 6e204d61 72203331 mpiled on Mar 31 [ 40s] 80a0b40 20323031 370a0000 72756e73 20706f77 2017...runs pow [ 40s] 80a0b50 6572746f 7020696e 2063616c 69627261 ertop in calibra [ 40s] 80a0b60 74696f6e 206d6f64 65000000 53657473 tion mode...Sets [ 40s] compare /.build.oldpackages/powertop-debuginfo-2.5-7.32.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-7.33.i686.rpm [ 40s] skipping -debuginfo package [ 40s] compare /.build.oldpackages/powertop-debugsource-2.5-7.32.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-7.33.i686.rpm [ 40s] Comparing powertop-debugsource-2.5-7.32.i686.rpm to powertop-debugsource-2.5-7.33.i686.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 40s] comparing scripts [ 40s] comparing filelist [ 40s] comparing file checksum [ 40s] creating rename script [ 40s] RPM meta information is identical [ 40s] compare /.build.oldpackages/powertop-docs-2.5-7.32.i686.rpm /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-7.33.i686.rpm [ 40s] Comparing powertop-docs-2.5-7.32.i686.rpm to powertop-docs-2.5-7.33.i686.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 40s] comparing scripts [ 40s] comparing filelist [ 40s] comparing file checksum [ 40s] creating rename script [ 40s] RPM meta information is identical [ 40s] compare /.build.oldpackages/powertop-locale-2.5-7.32.noarch.rpm /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-7.33.noarch.rpm [ 40s] Comparing powertop-locale-2.5-7.32.noarch.rpm to powertop-locale-2.5-7.33.noarch.rpm [ 40s] This is not a prerelease project. Compare the project name. [ 40s] comparing rpmtags [ 40s] comparing RELEASE [ 40s] comparing PROVIDES [ 41s] comparing scripts [ 41s] comparing filelist [ 41s] comparing file checksum [ 41s] creating rename script [ 41s] RPM meta information is identical [ 41s] ... saving built statistics [ 41s] ... saving built packages [ 41s] /home/abuild/rpmbuild/RPMS/i686/powertop-2.5-7.33.i686.rpm [ 41s] /home/abuild/rpmbuild/RPMS/i686/powertop-debuginfo-2.5-7.33.i686.rpm [ 41s] /home/abuild/rpmbuild/RPMS/i686/powertop-debugsource-2.5-7.33.i686.rpm [ 41s] /home/abuild/rpmbuild/RPMS/i686/powertop-docs-2.5-7.33.i686.rpm [ 41s] /home/abuild/rpmbuild/RPMS/noarch/powertop-locale-2.5-7.33.noarch.rpm [ 41s] /home/abuild/rpmbuild/SRPMS/powertop-2.5-7.33.src.rpm [ 41s] /home/abuild/rpmbuild/OTHER/_statistics [ 41s] [ 41s] w04 finished "build powertop.spec" at Fri Mar 31 17:00:12 UTC 2017. [ 41s] [ 44s] [ 37.026746] SysRq : Power Off [ 44s] [ 37.144450] Power down. [ 44s] build: extracting built packages... [ 44s] powertop-2.5-7.33.i686.rpm [ 44s] powertop-debuginfo-2.5-7.33.i686.rpm [ 44s] powertop-debugsource-2.5-7.33.i686.rpm [ 44s] powertop-docs-2.5-7.33.i686.rpm [ 44s] powertop-locale-2.5-7.33.noarch.rpm [ 44s] powertop-2.5-7.33.src.rpm [ 44s] _statistics