Info¶
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetNetworkName” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- const unsigned char * GSM_GetNetworkName(const char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetCountryName” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- const unsigned char * GSM_GetCountryName(const char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_FeatureToString” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- const char * GSM_FeatureToString(GSM_Feature)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_FeatureFromString” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Feature GSM_FeatureFromString(const char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_IsPhoneFeatureAvailable” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- gboolean GSM_IsPhoneFeatureAvailable(GSM_PhoneModel *, GSM_Feature)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_AddPhoneFeature” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- gboolean GSM_AddPhoneFeature(GSM_PhoneModel *, GSM_Feature)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetManufacturer” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetManufacturer(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetModel” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetModel(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetModelInfo” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_PhoneModel * GSM_GetModelInfo(GSM_StateMachine *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetFirmware” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetFirmware(GSM_StateMachine *, char *, char *, double *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetIMEI” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetIMEI(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetOriginalIMEI” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetOriginalIMEI(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetManufactureMonth” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetManufactureMonth(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetProductCode” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetProductCode(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetHardware” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetHardware(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetPPM” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetPPM(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetSIMIMSI” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetSIMIMSI(GSM_StateMachine *, char *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetBatteryCharge” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetBatteryCharge(GSM_StateMachine *, GSM_BatteryCharge *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetSignalQuality” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetSignalQuality(GSM_StateMachine *, GSM_SignalQuality *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetNetworkInfo” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetNetworkInfo(GSM_StateMachine *, GSM_NetworkInfo *)
Warning
doxygenfunction: Unable to resolve multiple matches for function “GSM_GetDisplayStatus” with arguments () in doxygen xml output for project “project0” from directory: /home/abuild/rpmbuild/BUILD/gammu-1.36.5/build/gammu-doc/xml. Potential matches:
- GSM_Error GSM_GetDisplayStatus(GSM_StateMachine *, GSM_DisplayFeatures *)
- GSM_NetworkInfo_State enum
Status of network logging
Values:
GSM_HomeNetwork= = 1-Home network for used SIM card.
GSM_NoNetwork-No network available for used SIM card.
GSM_RoamingNetwork-SIM card uses roaming.
GSM_RegistrationDenied-Network registration denied - card blocked or expired or disabled.
GSM_NetworkStatusUnknown-Unknown network status.
GSM_RequestingNetwork-Network explicitely requested by user.
- GSM_GPRS_State enum
Status of GPRS connection.
Values:
GSM_GPRS_Detached= = 1-GRPS is detached.
GSM_GPRS_Attached-GRPS is attached.
-
struct
GSM_NetworkInfo Structure for getting the current network info.
Public Members
-
char
CID[10] Cell ID (CID)
-
char
NetworkCode[10] GSM network code.
-
GSM_NetworkInfo_State
State Status of network logging. If phone is not logged into any network, some values are not filled
-
char
LAC[10] LAC (Local Area Code).
-
unsigned char
NetworkName[15 *2] Name of current network like returned from phone (or empty).
-
GSM_GPRS_State
GPRS GPRS state.
-
char
PacketCID[10] Cell ID (CID) for packet network
-
GSM_NetworkInfo_State
PacketState Status of network logging for packet data. If phone is not logged into any network, some values are not filled
-
char
PacketLAC[10] LAC (Local Area Code) for packet data.
-
char
-
struct
GSM_SignalQuality Information about signal quality, all these should be -1 when unknown.
Public Members
-
int
SignalPercent Signal strength in percent.
-
int
BitErrorRate Bit error rate in percent.
-
int
- GSM_ChargeState enum
Power source
Values:
GSM_BatteryPowered= = 1-Powered from battery
GSM_BatteryConnected-Powered from AC, battery connected
GSM_BatteryCharging-Powered from AC, battery is charging
GSM_BatteryNotConnected-Powered from AC, no battery
GSM_BatteryFull-Powered from AC, battery is fully charged
GSM_PowerFault-Power failure
- GSM_BatteryType enum
Power source
Values:
GSM_BatteryUnknown= = 0-Unknown battery
GSM_BatteryNiMH= = 1-NiMH battery
GSM_BatteryLiIon-Lithium Ion battery
GSM_BatteryLiPol-Lithium Polymer battery
-
struct
GSM_BatteryCharge Battery status
Public Members
-
int
BatteryPercent Signal strength in percent, -1 = unknown
-
GSM_ChargeState
ChargeState Charge state
-
int
BatteryVoltage Current battery voltage (in mV).
-
int
ChargeVoltage Voltage from charger (in mV)
-
int
ChargeCurrent Current from charger (in mA)
-
int
PhoneCurrent Phone current consumption (in mA)
-
int
BatteryTemperature Battery temperature (in degrees Celsius)
-
int
PhoneTemperature Phone temperature (in degrees Celsius)
-
int
BatteryCapacity Remaining battery capacity (in mAh)
-
GSM_BatteryType
BatteryType Battery type
-
int
- GSM_DisplayFeature enum
Display feature
Values:
GSM_CallActive= = 1-GSM_SMSMemoryFull-blinking envelope
GSM_FaxCall-GSM_UnreadSMS-GSM_DataCall-GSM_VoiceCall-GSM_KeypadLocked-
-
struct
GSM_DisplayFeatures Display features
- GSM_Feature enum
Phone features definition. This is usually used for things, which can not be determined on run time.
Values:
F_CAL33= = 1-Calendar,3310 style - 10 reminders, Unicode, 3 coding types
F_CAL52-Calendar,5210 style - full Unicode, etc.
F_CAL82-Calendar,8250 style - “normal”, but with Unicode
F_RING_SM-Ringtones returned in SM format - 33xx
F_NORING-No ringtones
F_NOPBKUNICODE-No phonebook in Unicode
F_NOWAP-No WAP
F_NOCALLER-No caller groups
F_NOPICTURE-No Picture Images
F_NOPICTUREUNI-No Picture Images text in Unicode
F_NOSTARTUP-No startup logo
F_NOCALENDAR-No calendar
F_NOSTARTANI-Startup logo is not animated
F_POWER_BATT-Network and battery level get from netmonitor
F_PROFILES33-Phone profiles in 3310 style
F_PROFILES51-Phone profiles in 5110 style
F_MAGICBYTES-Phone can make authentication with magic bytes
F_NODTMF-Phone can’t send DTMF
F_DISPSTATUS-Phone return display status
F_NOCALLINFO-Phone does not return call info
F_DAYMONTH-Day and month reversed in pbk, when compare to GSM models
F_PBK35-Phonebook in 3510 style with ringtones ID
F_PBKIMG-Phonebook in 7250 style with picture ID
F_PBKTONEGAL-Phonebook with selecting ringtones from gallery
F_PBKSMSLIST-Phonebook with SMS list
F_PBKUSER-Phonebook with user ID
F_6230iCALLER-Caller groups like in 6230i
F_RADIO-Phone with FM radio
F_TODO63-ToDo in 6310 style - 0x55 msg type
F_TODO66-ToDo in 6610 style - like calendar, with date and other
F_NOMIDI-No ringtones in MIDI
F_BLUETOOTH-Bluetooth support
F_NOFILESYSTEM-No images, ringtones, java saved in special filesystem
F_NOMMS-No MMS sets in phone
F_NOGPRSPOINT-GPRS point are not useable
F_CAL35-Calendar,3510 style - Reminder,Call,Birthday
F_CAL65-Calendar,6510 style - CBMM, method 3
F_WAPMMSPROXY-WAP & MMS settings contains first & second proxy
F_CHAT-Phone with Chat settings
F_SYNCML-Phone with SyncML settings
F_FILES2-Filesystem version 2
F_NOFILE1-No filesystem version 1
F_6230iWAP-WAP, MMS, etc. settings like in 6230i - unknown now
F_PROFILES-Profiles support available
F_SERIES40_30-Series 40 3.0
F_SMS_FILES-SMS are read from filesystem files like in Series 40 3.0
F_3220_MMS-MMS storage as in 3320
F_VOICETAGS-Voice tags available
F_CAL62-Calendar,6210 style - Call,Birthday,Memo,Meeting
F_NOTES-Notes supported
F_SMSONLYSENT-Phone supports only sent/unsent messages
F_BROKENCPBS-CPBS on some memories can hang phone
F_M20SMS-Siemens M20 like SMS handling
F_SLOWWRITE-Use slower writing which some phone need
F_SMSME900-SMS in ME start from location 900 - case of Sagem
F_ALCATEL-Phone supports Alcatel protocol
F_OBEX-Phone can switch to OBEX protocol from AT mode
F_IRMC_LEVEL_2-Phone supports IrMC level 2 even if it doesn’t report it
F_MODE22-Switching to OBEX mode is done using AT+MODE=22
F_SMS_LOCATION_0-Locations of SMS memories start from 0
F_NO_UCS2-Phone does not support UCS2 even if it reports it.
F_FORCE_UTF8-Phone returns strings in utf-8 even if it reports GSM.
F_SMS_SM-Phone supports SM storage for SMS even if it does not report so.
F_SMS_ME-Phone supports ME storage for SMS even if it does not report so.
F_XLNK-Switching to OBEX mode is done using AT+XLNK.
F_SUBMIT_SIM_ONLY-Submit messages can be saved on SM memory only.
F_PBK_UNICODE-Prefer Unicode for phone book manipulations.
F_SQWE-Switching to OBEX mode using AT^SQWE=3.
F_NO_ATOBEX-Do not use OBEX/AT switching even if available.
F_LENGTH_BYTES-Length of text for contact is in bytes and not chars.
F_BROKEN_CMGL-CMGL does not list real locations for CMGR, these should be sequential.
F_EXTRA_PBK_FIELD-Phonebook has extra numeric field at the end.
F_CKPD_NO_UNICODE-Key presses can not be in unicode.
F_CPROT-OBEX switching using AT+CPROT even if phone does not report it properly.
F_PBKFAVORITEMESSAGE-Phonebook with favorite messaging numbers
F_PBKNOPOSTAL-No support for postal entry in phonebook.
F_PBK_ENCODENUMBER-Encode number in HEX charset.
F_NO_CLIP-Do not use CLIP (phone hangs on it).
F_ENCODED_USSD-USSD propmts and responses are encoded like PDU in SMS (packed 7-bit GSM encoding).
F_USE_SMSTEXTMODE-Phone has better support for SMS text mode (rather than PDU mode)
F_CPIN_NO_OK-Phone does not end CPIN reply with OK/ERROR.
F_FOUR_DIGIT_YEAR-Phone require four digit year in time.
F_SMS_NO_ME-Phone does not have a phone SMS memory even if it reports so.
F_SMS_NO_SM-Phone does not have a SIM SMS memory even if it reports so.
F_SIEMENS_PBK-Phone supports Siemens style phonebook even if it does not tell so.
F_NO_ATSYNCML-Disable AT+SYNCML probing.
F_MOBEX-Phone supports m-obex (usually Samsung phones).
F_TSSPCSW-Phone supports m-obex (usually Samsung phones) using AT$TSSPCSW=1.
F_DISABLE_GETNEXT-Disable GetNext* operations on the dummy phone.
F_DISABLE_GETNEXTSMS-Disable GetNextSMS operations on the dummy phone.
F_DISABLE_CMGL-CMGL hangs, so should not be used.
F_NO_UTF8-Phone does not support UTF8 even if it reports it.
F_SAMSUNG_UTF8-Samsung B2100 in UCS-2 mode provides a garbled UTF-8 instead.
F_SMS_UTF8_ENCODED-SMS text is always UTF-8 encoded.
F_NO_STOP_CUSD-Avoid forcibly stopping CUSD session.
F_READ_SMSTEXTMODE-Reading og SMSes in text mode.
F_RESET_AFTER_TIMEOUT-Reset phone after timeout.
F_LAST_VALUE-Just marker of highest feature code, should not be used.
-
struct
GSM_PhoneModel Model identification, used for finding phone features.
Public Members
-
const char *
model Model as returned by phone
-
const char *
number Identification by Gammu
-
const char *
irdamodel Model as used over IrDA
-
GSM_Feature
features[GSM_MAX_PHONE_FEATURES+1] List of supported features
-
const char *