CIM_PhysicalMemory¶

Key properties¶

Local properties¶

uint64 Capacity

The total capacity of this PhysicalMemory, in bytes.

uint32 InterleavePosition

The position of this PhysicalMemory in an interleave. 0 indicates non-interleaved. 1 indicates the first position, 2 the second position and so on. For example, in a 2:1 interleave, a value of ‘1’ would indicate that the Memory is in the ‘even’ position.

uint32 MaxMemorySpeed

The maximum speed (in MHz) of PhysicalMemory.

string BankLabel

A string identifying the physically labeled bank where the Memory is located - for example, ‘Bank 0’ or ‘Bank A’.

boolean IsSpeedInMhz

The IsSpeedInMHz property is used to indicate if the Speed property or the MaxMemorySpeed contains the value of the memory speed. A value of TRUE shall indicate that the speed is represented by the MaxMemorySpeed property. A value of FALSE shall indicate that the speed is represented by the Speed property.

uint16 FormFactor

The implementation form factor for the Chip. For example, values such as SIMM (7), TSOP (9) or PGA (10) can be specified.

ValueMap	Values
0	Unknown
1	Other
2	SIP
3	DIP
4	ZIP
5	SOJ
6	Proprietary
7	SIMM
8	DIMM
9	TSOP
10	PGA
11	RIMM
12	SODIMM
13	SRIMM
14	SMD
15	SSMP
16	QFP
17	TQFP
18	SOIC
19	LCC
20	PLCC
21	BGA
22	FPBGA
23	LGA

uint16 MemoryType

The type of PhysicalMemory. Synchronous DRAM is also known as SDRAM Cache DRAM is also known as CDRAM CDRAM is also known as Cache DRAM SDRAM is also known as Synchronous DRAM BRAM is also known as Block RAM

ValueMap	Values
0	Unknown
1	Other
2	DRAM
3	Synchronous DRAM
4	Cache DRAM
5	EDO
6	EDRAM
7	VRAM
8	SRAM
9	RAM
10	ROM
11	Flash
12	EEPROM
13	FEPROM
14	EPROM
15	CDRAM
16	3DRAM
17	SDRAM
18	SGRAM
19	RDRAM
20	DDR
21	DDR-2
22	BRAM
23	FB-DIMM
24	DDR3
25	FBD2
26	DDR4
27	LPDDR
28	LPDDR2
29	LPDDR3
30	LPDDR4
31..32567	DMTF Reserved
32568..65535	Vendor Reserved

uint16 DataWidth

Data width of the PhysicalMemory, in bits. A data width of 0 and a TotalWidth of 8 would indicate that the Memory is solely used to provide error correction bits.

uint16 TotalWidth

Total width, in bits, of the PhysicalMemory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for DataWidth.

uint32 ConfiguredMemoryClockSpeed

The configured clock speed (in MHz) of PhysicalMemory.

uint32 PositionInRow

Specifies the position of the PhysicalMemory in a ‘row’. For example, if it takes two 8-bit memory devices to form a 16- bit row, then a value of ‘2’means that this Memory is the second device. 0 is an invalid value for this property.

uint32 Speed

The speed of the PhysicalMemory, in nanoseconds.

Local methods¶

None

Inherited properties¶

Inherited methods¶

None