[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 1s] [ 1s] 1ed3342e27f9 started "build libpciaccess.spec" at Thu Feb 26 18:39:48 UTC 2026. [ 1s] [ 1s] Building libpciaccess for project 'Tizen-Base-Dev' repository 'standard' arch 'aarch64' srcmd5 '7325d11798514e0e18cf29ffc56035ff' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/libpciaccess.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/libpciaccess.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/20/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.20/.build-srcdir/libpciaccess.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/43] preinstalling libmagic-data... [ 2s] [2/43] preinstalling libncurses... [ 2s] [3/43] preinstalling setup... [ 2s] [4/43] preinstalling filesystem... [ 2s] [5/43] preinstalling glibc... [ 3s] [6/43] preinstalling bash... [ 3s] [7/43] preinstalling diffutils... [ 3s] [8/43] preinstalling grep... [ 3s] [9/43] preinstalling libattr... [ 3s] [10/43] preinstalling libblkid... [ 3s] [11/43] preinstalling libbz2... [ 3s] [12/43] preinstalling libcap... [ 3s] [13/43] preinstalling libfreebl3... [ 3s] [14/43] preinstalling libgcc... [ 3s] [15/43] preinstalling liblua... [ 3s] [16/43] preinstalling liblzma... [ 3s] [17/43] preinstalling libopenssl3... [ 4s] [18/43] preinstalling libpopt... [ 4s] [19/43] preinstalling libreadline... [ 4s] [20/43] preinstalling libsmack... [ 4s] [21/43] preinstalling libsqlite... [ 4s] [22/43] preinstalling libuuid... [ 4s] [23/43] preinstalling libxcrypt... [ 4s] [24/43] preinstalling libxml2... [ 4s] [25/43] preinstalling libzstd1... [ 4s] [26/43] preinstalling nspr... [ 4s] [27/43] preinstalling sed... [ 4s] [28/43] preinstalling zlib... [ 4s] [29/43] preinstalling qemu-accel-x86_64-aarch64... [ 19s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 24s] [31/43] preinstalling coreutils... [ 24s] [32/43] preinstalling libacl... [ 24s] [33/43] preinstalling libelf... [ 24s] [34/43] preinstalling libmount... [ 24s] [35/43] preinstalling smack... [ 24s] [36/43] preinstalling bzip2... [ 25s] [37/43] preinstalling libmagic... [ 25s] [38/43] preinstalling tar... [ 25s] [39/43] preinstalling util-linux... [ 25s] [40/43] preinstalling rpm... [ 25s] [41/43] preinstalling util-linux-su... [ 25s] [42/43] preinstalling nss... [ 26s] [43/43] preinstalling libsoftokn3... [ 26s] running qemu-linux-user-x86_64-cross postinstall script [ 27s] running qemu-accel-x86_64-aarch64 postinstall script [ 27s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 27s] running setup postinstall script [ 27s] chroot: failed to run command '': No such file or directory [ 27s] initializing rpm db... [ 27s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 27s] breaking dependency libxcrypt-devel -> glibc-devel [ 27s] cycle: libsoftokn3 -> nss [ 27s] breaking dependency nss -> libsoftokn3 [ 27s] done [ 27s] querying package ids... [ 28s] [1/100] cumulate libmagic-data-5.46-1.7 [ 28s] [2/100] cumulate setup-0.9-1.1 [ 28s] [3/100] cumulate filesystem-3.1-1.1 [ 28s] [4/100] cumulate glibc-2.40-1.8 [ 28s] [5/100] cumulate bash-3.2.57-1.1 [ 28s] [6/100] cumulate cpio-2.8-1.1 [ 28s] [7/100] cumulate diffutils-3.10-1.1 [ 28s] [8/100] cumulate findutils-4.3.8-1.7 [ 28s] [9/100] cumulate gdbm-1.8.3-1.8 [ 28s] [10/100] cumulate hostname-3.23-1.1 [ 28s] [11/100] cumulate libatomic-14.2.0-1.8 [ 28s] [12/100] cumulate libattr-2.5.1-1.7 [ 28s] [13/100] cumulate libblkid-2.41.2-1.7 [ 28s] [14/100] cumulate libbz2-1.0.8-1.7 [ 28s] [15/100] cumulate libcap-2.73-1.7 [ 28s] [16/100] cumulate libfreebl3-3.109-1.1 [ 28s] [17/100] cumulate libgcc-14.2.0-1.8 [ 28s] [18/100] cumulate libgomp-14.2.0-1.8 [ 28s] [19/100] cumulate libitm-14.2.0-1.8 [ 28s] [20/100] cumulate libltdl-2.5.4-1.7 [ 28s] [21/100] cumulate liblua-5.1.5-1.7 [ 28s] [22/100] cumulate liblzma-5.8.1-1.8 [ 28s] [23/100] cumulate libopenssl3-3.0.18-1.7 [ 28s] [24/100] cumulate libpcre-8.45-1.7 [ 28s] [25/100] cumulate libpopt-1.16-1.7 [ 28s] [26/100] cumulate libsmack-1.3.1-1.7 [ 28s] [27/100] cumulate libsmartcols-2.41.2-1.7 [ 28s] [28/100] cumulate libsqlite-3.51.0-1.7 [ 28s] [29/100] cumulate libuuid-2.41.2-1.7 [ 28s] [30/100] cumulate libxcrypt-4.4.36-1.8 [ 28s] [31/100] cumulate libxml2-2.13.5-1.7 [ 28s] [32/100] cumulate libzstd1-1.5.7-1.7 [ 28s] [33/100] cumulate m4-1.4.20-1.1 [ 28s] [34/100] cumulate net-tools-2.0_20121208git-1.7 [ 28s] [35/100] cumulate nspr-4.36-1.1 [ 28s] [36/100] cumulate patch-2.8-1.7 [ 28s] [37/100] cumulate pkg-config-0.29.2-1.7 [ 28s] [38/100] cumulate sed-4.1c-1.7 [ 28s] [39/100] cumulate update-alternatives-1.22.21-1.1 [ 28s] [40/100] cumulate which-2.17-1.1 [ 28s] [41/100] cumulate zlib-1.3.1-1.8 [ 28s] [42/100] cumulate build-compare-2023.06.18-1.1 [ 28s] [43/100] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 28s] [44/100] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-3.1 [ 28s] [45/100] cumulate util-macros-1.19.0-1.1 [ 28s] [46/100] cumulate binutils-libs-2.43-1.8 [ 28s] [47/100] cumulate coreutils-6.9-14.1 [ 28s] [48/100] cumulate cpp-14.2.0-1.8 [ 28s] [49/100] cumulate gawk-3.1.5-1.1 [ 28s] [50/100] cumulate gcc-c++-14.2.0-1.8 [ 28s] [51/100] cumulate grep-2.5.2-1.7 [ 28s] [52/100] cumulate libacl-2.3.2-1.7 [ 28s] [53/100] cumulate libelf-0.189-1.8 [ 28s] [54/100] cumulate libgfortran-14.2.0-1.8 [ 28s] [55/100] cumulate liblastlog2-2.41.2-1.7 [ 28s] [56/100] cumulate libmount-2.41.2-1.7 [ 28s] [57/100] cumulate libstdc++-14.2.0-1.8 [ 28s] [58/100] cumulate make-4.4.1-1.7 [ 28s] [59/100] cumulate nss-certs-3.109-1.1 [ 28s] [60/100] cumulate smack-1.3.1-1.7 [ 28s] [61/100] cumulate bzip2-1.0.8-1.7 [ 28s] [62/100] cumulate libfdisk-2.41.2-1.7 [ 28s] [63/100] cumulate libmagic-5.46-1.7 [ 28s] [64/100] cumulate xz-5.8.1-1.8 [ 28s] [65/100] cumulate perl-5.42.0-1.7 [ 28s] [66/100] cumulate build-mkbaselibs-20120927-1.1 [ 28s] [67/100] cumulate libstdc++-devel-14.2.0-1.8 [ 28s] [68/100] cumulate linux-glibc-devel-6.6-1.8 [ 28s] [69/100] cumulate file-5.46-1.7 [ 28s] [70/100] cumulate tar-1.17-1.1 [ 28s] [71/100] cumulate terminfo-base-full-6.6-1.8 [ 28s] [72/100] cumulate autoconf-2.71-1.8 [ 28s] [73/100] cumulate glibc-locale-2.40-1.8 [ 28s] [74/100] cumulate gzip-1.3.12-1.7 [ 28s] [75/100] cumulate libcc1-14.2.0-1.8 [ 28s] [76/100] cumulate binutils-2.43-1.8 [ 28s] [77/100] cumulate pam-1.1.6-1.7 [ 28s] [78/100] cumulate tzdata-2025b-1.1 [ 28s] [79/100] cumulate libdw-0.189-1.8 [ 28s] [80/100] cumulate libarchive-3.8.1-1.7 [ 28s] [81/100] cumulate automake-1.16.5-1.8 [ 28s] [82/100] cumulate libasm-0.189-1.8 [ 28s] [83/100] cumulate libncurses6-6.6-1.8 [ 28s] [84/100] cumulate build-20120927-1.1 [ 28s] [85/100] cumulate gcc-14.2.0-1.8 [ 28s] [86/100] cumulate rpm-4.14.1.1-1.7 [ 28s] [87/100] cumulate libncurses-6.6-1.8 [ 28s] [88/100] cumulate less-685-1.1 [ 28s] [89/100] cumulate libreadline-5.2-1.7 [ 28s] [90/100] cumulate qemu-accel-x86_64-aarch64-0.4-1.1 [ 28s] [91/100] cumulate libtool-2.5.4-1.7 [ 28s] [92/100] cumulate elfutils-0.189-1.8 [ 28s] [93/100] cumulate util-linux-2.41.2-1.7 [ 28s] [94/100] cumulate util-linux-su-2.41.2-1.7 [ 28s] [95/100] cumulate libxcrypt-devel-4.4.36-1.8 [ 28s] [96/100] cumulate nss-3.109-1.1 [ 28s] [97/100] cumulate glibc-devel-2.40-1.8 [ 28s] [98/100] cumulate libsoftokn3-3.109-1.1 [ 28s] [99/100] cumulate zlib-devel-1.3.1-1.8 [ 28s] [100/100] cumulate rpm-build-4.14.1.1-1.7 [ 28s] now installing cumulated packages [ 29s] Preparing... ######################################## [ 29s] Updating / installing... [ 29s] setup-0.9-1.1 ######################################## [ 29s] filesystem-3.1-1.1 ######################################## [ 29s] glibc-2.40-1.8 ######################################## [ 30s] bash-3.2.57-1.1 ######################################## [ 30s] zlib-1.3.1-1.8 ######################################## [ 31s] coreutils-6.9-14.1 ######################################## [ 31s] libbz2-1.0.8-1.7 ######################################## [ 31s] libgcc-14.2.0-1.8 ######################################## [ 31s] libstdc++-14.2.0-1.8 ######################################## [ 32s] libelf-0.189-1.8 ######################################## [ 32s] liblzma-5.8.1-1.8 ######################################## [ 32s] libdw-0.189-1.8 ######################################## [ 33s] libxcrypt-4.4.36-1.8 ######################################## [ 33s] libblkid-2.41.2-1.7 ######################################## [ 34s] libopenssl3-3.0.18-1.7 ######################################## [ 34s] nspr-4.36-1.1 ######################################## [ 34s] pkg-config-0.29.2-1.7 ######################################## [ 34s] pam-1.1.6-1.7 ######################################## [ 35s] libcap-2.73-1.7 ######################################## [ 35s] libfreebl3-3.109-1.1 ######################################## [ 36s] liblua-5.1.5-1.7 ######################################## [ 36s] libpopt-1.16-1.7 ######################################## [ 36s] libsqlite-3.51.0-1.7 ######################################## [ 37s] libuuid-2.41.2-1.7 ######################################## [ 37s] libzstd1-1.5.7-1.7 ######################################## [ 37s] libfdisk-2.41.2-1.7 ######################################## [ 37s] liblastlog2-2.41.2-1.7 ######################################## [ 37s] nss-certs-3.109-1.1 ######################################## [ 37s] libsoftokn3-3.109-1.1 ######################################## [ 38s] nss-3.109-1.1 ######################################## [ 38s] libmount-2.41.2-1.7 ######################################## [ 39s] libasm-0.189-1.8 ######################################## [ 39s] xz-5.8.1-1.8 ######################################## [ 39s] libcc1-14.2.0-1.8 ######################################## [ 39s] libgfortran-14.2.0-1.8 ######################################## [ 39s] bzip2-1.0.8-1.7 ######################################## [ 40s] linux-glibc-devel-6.6-1.8 ######################################## [ 40s] libxcrypt-devel-4.4.36-1.8 ######################################## [ 40s] glibc-devel-2.40-1.8 ######################################## [ 40s] terminfo-base-full-6.6-1.8 ######################################## [ 40s] libncurses6-6.6-1.8 ######################################## [ 40s] libreadline-5.2-1.7 ######################################## [ 41s] gzip-1.3.12-1.7 ######################################## [ 41s] binutils-libs-2.43-1.8 ######################################## [ 42s] binutils-2.43-1.8 ######################################## [ 42s] make-4.4.1-1.7 ######################################## [ 42s] findutils-4.3.8-1.7 ######################################## [ 42s] gdbm-1.8.3-1.8 ######################################## [ 47s] perl-5.42.0-1.7 ######################################## [ 47s] build-mkbaselibs-20120927-1.1 ######################################## [ 47s] libatomic-14.2.0-1.8 ######################################## [ 47s] libattr-2.5.1-1.7 ######################################## [ 47s] libacl-2.3.2-1.7 ######################################## [ 48s] tar-1.17-1.1 ######################################## [ 48s] libgomp-14.2.0-1.8 ######################################## [ 48s] libitm-14.2.0-1.8 ######################################## [ 53s] gcc-14.2.0-1.8 ######################################## [ 53s] libltdl-2.5.4-1.7 ######################################## [ 53s] libpcre-8.45-1.7 ######################################## [ 53s] libsmack-1.3.1-1.7 ######################################## [ 54s] libsmartcols-2.41.2-1.7 ######################################## [ 54s] libxml2-2.13.5-1.7 ######################################## [ 55s] libarchive-3.8.1-1.7 ######################################## [ 55s] m4-1.4.20-1.1 ######################################## [ 55s] autoconf-2.71-1.8 ######################################## [ 55s] automake-1.16.5-1.8 ######################################## [ 56s] patch-2.8-1.7 ######################################## [ 56s] sed-4.1c-1.7 ######################################## [ 57s] util-linux-2.41.2-1.7 ######################################## [ 57s] libmagic-data-5.46-1.7 ######################################## [ 57s] libmagic-5.46-1.7 ######################################## [ 58s] rpm-4.14.1.1-1.7 ######################################## [ 59s] rpm-build-4.14.1.1-1.7 ######################################## [ 59s] file-5.46-1.7 ######################################## [ 59s] util-linux-su-2.41.2-1.7 ######################################## [ 59s] libtool-2.5.4-1.7 ######################################## [ 59s] smack-1.3.1-1.7 ######################################## [ 59s] grep-2.5.2-1.7 ######################################## [ 76s] qemu-accel-x86_64-aarch64-0.4-1.1 ######################################## [ 77s] build-20120927-1.1 ######################################## [ 77s] libncurses-6.6-1.8 ######################################## [ 77s] less-685-1.1 ######################################## [ 77s] zlib-devel-1.3.1-1.8 ######################################## [ 77s] elfutils-0.189-1.8 ######################################## [ 77s] util-macros-1.19.0-1.1 ######################################## [ 78s] libstdc++-devel-14.2.0-1.8 ######################################## [ 78s] glibc-locale-2.40-1.8 ######################################## [ 79s] tzdata-2025b-1.1 ######################################## [ 80s] cpp-14.2.0-1.8 ######################################## [ 81s] gcc-c++-14.2.0-1.8 ######################################## [ 81s] build-compare-2023.06.18-1.1 ######################################## [ 81s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 89s] qemu-linux-user-x86_64-cross-9.2.3.1-3######################################## [ 90s] gawk-3.1.5-1.1 ######################################## [ 90s] cpio-2.8-1.1 ######################################## [ 90s] diffutils-3.10-1.1 ######################################## [ 90s] hostname-3.23-1.1 ######################################## [ 90s] net-tools-2.0_20121208git-1.7 ######################################## [ 90s] update-alternatives-1.22.21-1.1 ######################################## [ 90s] which-2.17-1.1 ######################################## [ 91s] now finalizing build dir... [ 92s] ----------------------------------------------------------------- [ 92s] I have the following modifications for libpciaccess.spec: [ 92s] 6c6 [ 92s] < Release: 0 [ 92s] --- [ 92s] > Release: 1.1 [ 92s] 84a85 [ 92s] > %changelog [ 92s] build target is aarch64-tizen-linux [ 92s] ----------------------------------------------------------------- [ 92s] ----- building libpciaccess.spec (user abuild) [ 92s] ----------------------------------------------------------------- [ 92s] ----------------------------------------------------------------- [ 92s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 92s] Building target platforms: aarch64-tizen-linux [ 92s] Building for target aarch64-tizen-linux [ 92s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.HU1YLv [ 92s] + umask 022 [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + cd /home/abuild/rpmbuild/BUILD [ 92s] + rm -rf libpciaccess-0.13.2 [ 92s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 92s] + /bin/tar -xof - [ 92s] + STATUS=0 [ 92s] + '[' 0 -ne 0 ']' [ 92s] + cd libpciaccess-0.13.2 [ 92s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 92s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 92s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 92s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 92s] patching file src/Makefile.am [ 92s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 92s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 92s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 92s] patching file src/common_bridge.c [ 92s] patching file src/linux_sysfs.c [ 92s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 92s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 92s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 92s] patching file src/linux_sysfs.c [ 92s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 93s] + exit 0 [ 93s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.4wij8r [ 93s] + umask 022 [ 93s] + cd /home/abuild/rpmbuild/BUILD [ 93s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 93s] + export CXXFLAGS [ 93s] + LDFLAGS= [ 93s] + export LDFLAGS [ 93s] + cd libpciaccess-0.13.2 [ 93s] + ref=/usr/lib/rpm [ 93s] + mints=0 [ 93s] + case $(uname -m) in [ 93s] ++ uname -m [ 93s] + mints=20120610 [ 93s] + for s in guess sub [ 93s] ++ find -maxdepth 8 -name config.guess [ 93s] + for s in guess sub [ 93s] ++ find -maxdepth 8 -name config.sub [ 93s] + NOCONFIGURE=1 [ 93s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 93s] + export CFLAGS [ 93s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 93s] + export CXXFLAGS [ 93s] + LDFLAGS= [ 93s] + export LDFLAGS [ 93s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 93s] autoreconf: export WARNINGS= [ 93s] autoreconf: Entering directory '.' [ 94s] autoreconf: configure.ac: not using Gettext [ 95s] autoreconf: running: aclocal -I m4 [ 99s] autoreconf: configure.ac: tracing [ 101s] autoreconf: running: libtoolize --copy [ 101s] libtoolize: putting auxiliary files in '.'. [ 101s] libtoolize: copying file './ltmain.sh' [ 101s] libtoolize: putting macros in 'm4'. [ 101s] libtoolize: copying file 'm4/libtool.m4' [ 101s] libtoolize: copying file 'm4/ltoptions.m4' [ 101s] libtoolize: copying file 'm4/ltsugar.m4' [ 101s] libtoolize: copying file 'm4/ltversion.m4' [ 101s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 101s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 101s] libtoolize: and rerunning libtoolize and aclocal. [ 101s] autoreconf: configure.ac: not using Intltool [ 101s] autoreconf: configure.ac: not using Gtkdoc [ 101s] autoreconf: running: aclocal -I m4 [ 105s] autoreconf: running: /usr/bin/autoconf [ 107s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 107s] configure.ac:36: You should run autoupdate. [ 107s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 107s] configure.ac:36: the top level [ 107s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 107s] configure.ac:42: You should run autoupdate. [ 107s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 107s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 107s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 107s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 107s] configure.ac:42: the top level [ 110s] autoreconf: running: /usr/bin/autoheader [ 112s] autoreconf: running: automake --add-missing --copy --no-force [ 116s] configure.ac:33: installing './compile' [ 116s] configure.ac:36: installing './config.guess' [ 116s] configure.ac:36: installing './config.sub' [ 116s] configure.ac:32: installing './install-sh' [ 117s] configure.ac:32: installing './missing' [ 118s] scanpci/Makefile.am: installing './depcomp' [ 118s] autoreconf: Leaving directory '.' [ 119s] checking for a BSD-compatible install... /bin/install -c [ 119s] checking whether build environment is sane... yes [ 119s] checking for a race-free mkdir -p... /bin/mkdir -p [ 119s] checking for gawk... gawk [ 119s] checking whether make sets $(MAKE)... yes [ 119s] checking whether make supports nested variables... yes [ 119s] checking whether make supports the include directive... yes (GNU style) [ 119s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 119s] checking whether the C compiler works... yes [ 119s] checking for C compiler default output file name... a.out [ 119s] checking for suffix of executables... [ 120s] checking whether we are cross compiling... no [ 120s] checking for suffix of object files... o [ 120s] checking whether the compiler supports GNU C... yes [ 120s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 120s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 120s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 120s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 120s] checking for stdio.h... yes [ 120s] checking for stdlib.h... yes [ 120s] checking for string.h... yes [ 120s] checking for inttypes.h... yes [ 120s] checking for stdint.h... yes [ 120s] checking for strings.h... yes [ 121s] checking for sys/stat.h... yes [ 121s] checking for sys/types.h... yes [ 121s] checking for unistd.h... yes [ 121s] checking for wchar.h... yes [ 121s] checking for minix/config.h... no [ 121s] checking whether it is safe to define __EXTENSIONS__... yes [ 121s] checking whether _XOPEN_SOURCE should be defined... no [ 121s] checking build system type... aarch64-tizen-linux-gnu [ 121s] checking host system type... aarch64-tizen-linux-gnu [ 121s] checking how to print strings... printf [ 121s] checking for a sed that does not truncate output... /bin/sed [ 121s] checking for grep that handles long lines and -e... /bin/grep [ 121s] checking for egrep... /bin/grep -E [ 121s] checking for fgrep... /bin/grep -F [ 121s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 121s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 121s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 121s] checking the name lister (/bin/nm -B) interface... BSD nm [ 121s] checking whether ln -s works... yes [ 121s] checking the maximum length of command line arguments... 1572864 [ 121s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 121s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 121s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 121s] checking for file... file [ 121s] checking for aarch64-tizen-linux-gnu-objdump... no [ 121s] checking for objdump... objdump [ 121s] checking how to recognize dependent libraries... pass_all [ 121s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 121s] checking for dlltool... no [ 121s] checking how to associate runtime and link libraries... printf %s\n [ 121s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 121s] checking for ranlib... ranlib [ 121s] checking for aarch64-tizen-linux-gnu-ar... no [ 121s] checking for ar... ar [ 121s] checking for archiver @FILE support... @ [ 121s] checking for aarch64-tizen-linux-gnu-strip... no [ 121s] checking for strip... strip [ 122s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 122s] checking for sysroot... no [ 122s] checking for a working dd... /bin/dd [ 122s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 122s] checking for aarch64-tizen-linux-gnu-mt... no [ 122s] checking for mt... no [ 122s] checking if : is a manifest tool... no [ 122s] checking for dlfcn.h... yes [ 122s] checking for objdir... .libs [ 122s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 122s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 122s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 123s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 123s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 123s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 123s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 123s] checking whether -lc should be explicitly linked in... no [ 123s] checking dynamic linker characteristics... GNU/Linux ld.so [ 123s] checking how to hardcode library paths into programs... immediate [ 123s] checking whether stripping libraries is possible... yes [ 123s] checking if libtool supports shared libraries... yes [ 123s] checking whether to build shared libraries... yes [ 123s] checking whether to build static libraries... yes [ 124s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 124s] checking whether __clang__ is declared... no [ 124s] checking whether __INTEL_COMPILER is declared... no [ 124s] checking whether __SUNPRO_C is declared... no [ 124s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 125s] checking pkg-config is at least version 0.9.0... yes [ 125s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no [ 125s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no [ 125s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes [ 125s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes [ 126s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes [ 126s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes [ 126s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes [ 126s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes [ 127s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes [ 128s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes [ 129s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes [ 130s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes [ 131s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes [ 131s] checking whether make supports nested variables... (cached) yes [ 131s] checking for special C compiler options needed for large files... no [ 131s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 131s] checking for err.h... yes [ 131s] checking for asm/mtrr.h... no [ 131s] checking for struct pci_io.pi_sel.pc_domain... no [ 131s] checking that generated files are newer than configure... done [ 131s] configure: creating ./config.status [ 133s] config.status: creating Makefile [ 133s] config.status: creating include/Makefile [ 133s] config.status: creating man/Makefile [ 133s] config.status: creating src/Makefile [ 133s] config.status: creating scanpci/Makefile [ 133s] config.status: creating pciaccess.pc [ 133s] config.status: creating config.h [ 133s] config.status: executing depfiles commands [ 134s] config.status: executing libtool commands [ 134s] + export 'CFLAGS=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w' [ 134s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w' [ 134s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 134s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 134s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 134s] + export CFLAGS [ 134s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 134s] + export CXXFLAGS [ 134s] + LDFLAGS= [ 134s] + export LDFLAGS [ 134s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 135s] checking for a BSD-compatible install... /bin/install -c [ 135s] checking whether build environment is sane... yes [ 135s] checking for a race-free mkdir -p... /bin/mkdir -p [ 135s] checking for gawk... gawk [ 135s] checking whether make sets $(MAKE)... yes [ 135s] checking whether make supports nested variables... yes [ 135s] checking whether make supports the include directive... yes (GNU style) [ 135s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 135s] checking whether the C compiler works... yes [ 135s] checking for C compiler default output file name... a.out [ 135s] checking for suffix of executables... [ 136s] checking whether we are cross compiling... no [ 136s] checking for suffix of object files... o [ 136s] checking whether the compiler supports GNU C... yes [ 136s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 136s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 136s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 136s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 136s] checking for stdio.h... yes [ 136s] checking for stdlib.h... yes [ 136s] checking for string.h... yes [ 136s] checking for inttypes.h... yes [ 136s] checking for stdint.h... yes [ 136s] checking for strings.h... yes [ 136s] checking for sys/stat.h... yes [ 136s] checking for sys/types.h... yes [ 137s] checking for unistd.h... yes [ 137s] checking for wchar.h... yes [ 137s] checking for minix/config.h... no [ 137s] checking whether it is safe to define __EXTENSIONS__... yes [ 137s] checking whether _XOPEN_SOURCE should be defined... no [ 137s] checking build system type... aarch64-tizen-linux-gnu [ 137s] checking host system type... aarch64-tizen-linux-gnu [ 137s] checking how to print strings... printf [ 137s] checking for a sed that does not truncate output... /bin/sed [ 137s] checking for grep that handles long lines and -e... /bin/grep [ 137s] checking for egrep... /bin/grep -E [ 137s] checking for fgrep... /bin/grep -F [ 137s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 137s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 137s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 137s] checking the name lister (/bin/nm -B) interface... BSD nm [ 137s] checking whether ln -s works... yes [ 137s] checking the maximum length of command line arguments... 1572864 [ 137s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 137s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 137s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 137s] checking for file... file [ 137s] checking for aarch64-tizen-linux-gnu-objdump... no [ 137s] checking for objdump... objdump [ 137s] checking how to recognize dependent libraries... pass_all [ 137s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 137s] checking for dlltool... no [ 137s] checking how to associate runtime and link libraries... printf %s\n [ 137s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 137s] checking for ranlib... ranlib [ 137s] checking for aarch64-tizen-linux-gnu-ar... no [ 137s] checking for ar... ar [ 137s] checking for archiver @FILE support... @ [ 137s] checking for aarch64-tizen-linux-gnu-strip... no [ 137s] checking for strip... strip [ 137s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 137s] checking for sysroot... no [ 137s] checking for a working dd... /bin/dd [ 137s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 137s] checking for aarch64-tizen-linux-gnu-mt... no [ 137s] checking for mt... no [ 137s] checking if : is a manifest tool... no [ 137s] checking for dlfcn.h... yes [ 137s] checking for objdir... .libs [ 138s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... yes [ 138s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 138s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 138s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 138s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 138s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 138s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 138s] checking whether -lc should be explicitly linked in... no [ 138s] checking dynamic linker characteristics... GNU/Linux ld.so [ 138s] checking how to hardcode library paths into programs... immediate [ 138s] checking whether stripping libraries is possible... yes [ 138s] checking if libtool supports shared libraries... yes [ 138s] checking whether to build shared libraries... yes [ 138s] checking whether to build static libraries... no [ 138s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed [ 138s] checking whether __clang__ is declared... no [ 138s] checking whether __INTEL_COMPILER is declared... no [ 138s] checking whether __SUNPRO_C is declared... no [ 138s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 138s] checking pkg-config is at least version 0.9.0... yes [ 138s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no [ 138s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes [ 139s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes [ 140s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes [ 141s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes [ 141s] checking whether make supports nested variables... (cached) yes [ 142s] checking for gzopen in -lz... yes [ 142s] checking for zlib.h... yes [ 142s] checking for special C compiler options needed for large files... no [ 142s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 142s] checking for err.h... yes [ 142s] checking for asm/mtrr.h... no [ 142s] checking for struct pci_io.pi_sel.pc_domain... no [ 142s] checking that generated files are newer than configure... done [ 142s] configure: creating ./config.status [ 143s] config.status: creating Makefile [ 143s] config.status: creating include/Makefile [ 143s] config.status: creating man/Makefile [ 143s] config.status: creating src/Makefile [ 143s] config.status: creating scanpci/Makefile [ 143s] config.status: creating pciaccess.pc [ 143s] config.status: creating config.h [ 144s] config.status: executing depfiles commands [ 144s] config.status: executing libtool commands [ 144s] + make -j12 [ 144s] make all-recursive [ 144s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 144s] Making all in include [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 144s] make[2]: Nothing to be done for 'all'. [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 144s] Making all in man [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 144s] GEN scanpci.1 [ 144s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 144s] Making all in src [ 144s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 144s] CC common_bridge.lo [ 144s] CC common_init.lo [ 144s] CC common_iterator.lo [ 144s] CC common_interface.lo [ 144s] CC common_io.lo [ 144s] CC common_capability.lo [ 144s] CC common_device_name.lo [ 144s] CC common_map.lo [ 144s] CC common_vgaarb.lo [ 144s] CC linux_sysfs.lo [ 144s] CC linux_devmem.lo [ 145s] CCLD libpciaccess.la [ 145s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 145s] Making all in scanpci [ 145s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 145s] CC scanpci.o [ 145s] CCLD scanpci [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] + exit 0 [ 146s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Gg37Kb [ 146s] + umask 022 [ 146s] + cd /home/abuild/rpmbuild/BUILD [ 146s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 146s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 146s] + cd libpciaccess-0.13.2 [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 146s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 install [ 146s] Making install in include [ 146s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 146s] make[2]: Nothing to be done for 'install-exec-am'. [ 146s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/include' [ 146s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/include' [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 146s] Making install in man [ 146s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 146s] make[2]: Nothing to be done for 'install-exec-am'. [ 146s] make[2]: Nothing to be done for 'install-data-am'. [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 146s] Making install in src [ 146s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 146s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64' [ 146s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64' [ 146s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2 [ 146s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 146s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 146s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.la [ 146s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 146s] make[2]: Nothing to be done for 'install-data-am'. [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 146s] Making install in scanpci [ 146s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 146s] make[2]: Nothing to be done for 'install-exec-am'. [ 146s] make[2]: Nothing to be done for 'install-data-am'. [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 146s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] make[2]: Nothing to be done for 'install-exec-am'. [ 146s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/pkgconfig' [ 146s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/pkgconfig' [ 146s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 146s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/info/dir [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*\.la$' [ 146s] + xargs rm -f -- [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*\.a$' [ 146s] + xargs rm -f -- [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/info [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/packages [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/libpciaccess [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc/libpciaccess-0.13.2 [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/gtk-doc [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/doc [ 146s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/man [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 146s] + xargs rm -f -- [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 146s] + xargs rm -f -- [ 146s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 146s] + xargs rm -f -- [ 146s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 146s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2 [ 146s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_line_str [ 146s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 146s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 146s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/lib64/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 146s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 146s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 147s] + /usr/lib/rpm/check-buildroot [ 147s] + /usr/lib/rpm//brp-compress [ 147s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 147s] + /usr/lib/rpm/brp-python-hardlink [ 147s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 147s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 147s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 147s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 147s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 147s] Processing files: libpciaccess-0.13.2-1.1.aarch64 [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.bkufLM [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd libpciaccess-0.13.2 [ 147s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 147s] + export LC_ALL=C [ 147s] + LC_ALL=C [ 147s] + export LICENSEDIR [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 147s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess [ 147s] + exit 0 [ 147s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(aarch-64) = 0.13.2-1.1 libpciaccess.so.0()(64bit) [ 147s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Requires(post): /sbin/ldconfig [ 147s] Requires(postun): /sbin/ldconfig [ 147s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.38)(64bit) libz.so.1()(64bit) libz.so.1(ZLIB_1.2.3.3)(64bit) [ 147s] Processing files: libpciaccess-debugsource-0.13.2-1.1.aarch64 [ 147s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Processing files: libpciaccess-devel-0.13.2-1.1.aarch64 [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.pF6LH3 [ 147s] + umask 022 [ 147s] + cd /home/abuild/rpmbuild/BUILD [ 147s] + cd libpciaccess-0.13.2 [ 147s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 147s] + export LC_ALL=C [ 147s] + LC_ALL=C [ 147s] + export LICENSEDIR [ 147s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 147s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64/usr/share/licenses/libpciaccess-devel [ 147s] + exit 0 [ 147s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(aarch-64) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Requires: /usr/bin/pkg-config libpciaccess.so.0()(64bit) [ 147s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.aarch64 [ 147s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 147s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 147s] [ 147s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(aarch-64) = 0.13.2-1.1 [ 147s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 147s] Recommends: libpciaccess-debugsource(aarch-64) = 0.13.2-1.1 [ 147s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 148s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 148s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-0.13.2-1.1.aarch64.rpm [ 148s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debugsource-0.13.2-1.1.aarch64.rpm [ 148s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-devel-0.13.2-1.1.aarch64.rpm [ 148s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debuginfo-0.13.2-1.1.aarch64.rpm [ 148s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3E06Jv [ 148s] + umask 022 [ 148s] + cd /home/abuild/rpmbuild/BUILD [ 148s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 148s] + cd libpciaccess-0.13.2 [ 148s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.aarch64 [ 148s] + exit 0 [ 148s] ... checking for files with abuild user/group [ 148s] ... creating baselibs [ 149s] no targets for arch aarch64, nothing to do [ 149s] [ 149s] 1ed3342e27f9 finished "build libpciaccess.spec" at Thu Feb 26 18:42:16 UTC 2026. [ 149s] Retried build at Mon Mar 23 20:01:35 2026 returned same result, skipped Retried build at Tue Mar 24 06:59:04 2026 returned same result, skipped