[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] c064868841dc started "build perl-PerlIO-gzip.spec" at Sat May 25 10:49:32 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-Base-Toolchain' repository 'standard' arch 'aarch64' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/42] preinstalling libmagic-data... [ 4s] [2/42] preinstalling libncurses... [ 4s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 5s] [5/42] preinstalling glibc... [ 5s] [6/42] preinstalling bash... [ 6s] [7/42] preinstalling diffutils... [ 6s] [8/42] preinstalling grep... [ 6s] [9/42] preinstalling libattr... [ 6s] [10/42] preinstalling libblkid... [ 6s] [11/42] preinstalling libbz2... [ 7s] [12/42] preinstalling libfreebl3... [ 7s] [13/42] preinstalling libgcc... [ 7s] [14/42] preinstalling liblua... [ 7s] [15/42] preinstalling liblzma... [ 8s] [16/42] preinstalling libpopt... [ 8s] [17/42] preinstalling libreadline... [ 8s] [18/42] preinstalling libsmack... [ 8s] [19/42] preinstalling libsqlite... [ 8s] [20/42] preinstalling libuuid... [ 9s] [21/42] preinstalling libxcrypt... [ 9s] [22/42] preinstalling libzstd1... [ 9s] [23/42] preinstalling nspr... [ 9s] [24/42] preinstalling sed... [ 9s] [25/42] preinstalling zlib... [ 9s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 33s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 39s] [28/42] preinstalling coreutils... [ 40s] [29/42] preinstalling libacl... [ 40s] [30/42] preinstalling libcap... [ 40s] [31/42] preinstalling libelf... [ 40s] [32/42] preinstalling libmount... [ 40s] [33/42] preinstalling smack... [ 41s] [34/42] preinstalling bzip2... [ 41s] [35/42] preinstalling libmagic... [ 41s] [36/42] preinstalling libxml2... [ 41s] [37/42] preinstalling tar... [ 42s] [38/42] preinstalling util-linux... [ 42s] [39/42] preinstalling util-linux-su... [ 43s] [40/42] preinstalling nss... [ 43s] [41/42] preinstalling libsoftokn3... [ 43s] [42/42] preinstalling rpm... [ 45s] running qemu-linux-user-x86_64-cross postinstall script [ 46s] running qemu-accel-x86_64-aarch64 postinstall script [ 46s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.1.0/liblto_plugin.so': No such file or directory [ 46s] running setup postinstall script [ 46s] chroot: failed to run command '': No such file or directory [ 46s] initializing rpm db... [ 46s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 46s] breaking dependency libxcrypt-devel -> glibc-devel [ 46s] cycle: libsoftokn3 -> nss [ 46s] breaking dependency nss -> libsoftokn3 [ 46s] done [ 46s] querying package ids... [ 49s] [1/99] cumulate libmagic-data-5.45-1.3 [ 49s] [2/99] cumulate setup-0.9-1.2 [ 49s] [3/99] cumulate filesystem-3.1-1.1 [ 49s] [4/99] cumulate glibc-2.39-1.6 [ 49s] [5/99] cumulate bash-3.2.57-1.1 [ 49s] [6/99] cumulate cpio-2.8-1.1 [ 49s] [7/99] cumulate diffutils-3.10-1.1 [ 49s] [8/99] cumulate findutils-4.3.8-1.3 [ 49s] [9/99] cumulate gdbm-1.8.3-1.6 [ 49s] [10/99] cumulate hostname-3.23-1.1 [ 49s] [11/99] cumulate libatomic-14.1.0-1.6 [ 49s] [12/99] cumulate libattr-2.5.1-1.3 [ 49s] [13/99] cumulate libblkid-2.39.3-1.3 [ 49s] [14/99] cumulate libbz2-1.0.8-1.3 [ 49s] [15/99] cumulate libfreebl3-3.98-1.6 [ 49s] [16/99] cumulate libgcc-14.1.0-1.6 [ 49s] [17/99] cumulate libgomp-14.1.0-1.6 [ 49s] [18/99] cumulate libitm-14.1.0-1.6 [ 49s] [19/99] cumulate libltdl-2.4.7-1.6 [ 49s] [20/99] cumulate liblua-5.1.5-1.3 [ 49s] [21/99] cumulate liblzma-5.4.5-1.6 [ 49s] [22/99] cumulate libopenssl3-3.0.13-1.6 [ 49s] [23/99] cumulate libpcre-8.45-1.3 [ 49s] [24/99] cumulate libpopt-1.16-1.3 [ 49s] [25/99] cumulate libsmack-1.3.1-1.3 [ 49s] [26/99] cumulate libsmartcols-2.39.3-1.3 [ 49s] [27/99] cumulate libsqlite-3.44.0-1.3 [ 49s] [28/99] cumulate libuuid-2.39.3-1.3 [ 49s] [29/99] cumulate libxcrypt-4.4.36-1.6 [ 49s] [30/99] cumulate libzstd1-1.5.5-1.3 [ 49s] [31/99] cumulate m4-1.4.19-1.1 [ 49s] [32/99] cumulate net-tools-2.0_20121208git-1.3 [ 49s] [33/99] cumulate nspr-4.35-1.3 [ 49s] [34/99] cumulate patch-2.7.6-1.3 [ 49s] [35/99] cumulate pkg-config-0.29.2-1.4 [ 49s] [36/99] cumulate sed-4.1c-1.3 [ 49s] [37/99] cumulate update-alternatives-1.22.2-1.2 [ 49s] [38/99] cumulate which-2.17-1.2 [ 49s] [39/99] cumulate zlib-1.3-1.4 [ 49s] [40/99] cumulate build-compare-2023.06.18-1.1 [ 49s] [41/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.2 [ 49s] [42/99] cumulate binutils-libs-2.42-1.6 [ 49s] [43/99] cumulate coreutils-6.9-14.1 [ 49s] [44/99] cumulate cpp-14.1.0-1.6 [ 49s] [45/99] cumulate gawk-3.1.5-1.1 [ 49s] [46/99] cumulate gcc-c++-14.1.0-1.6 [ 49s] [47/99] cumulate grep-2.5.2-1.3 [ 49s] [48/99] cumulate libacl-2.3.2-1.3 [ 49s] [49/99] cumulate libcap-2.69-1.5 [ 49s] [50/99] cumulate libelf-0.189-1.6 [ 49s] [51/99] cumulate libgfortran-14.1.0-1.6 [ 49s] [52/99] cumulate libmount-2.39.3-1.3 [ 49s] [53/99] cumulate libstdc++-14.1.0-1.6 [ 49s] [54/99] cumulate make-4.4-1.3 [ 49s] [55/99] cumulate nss-certs-3.98-1.6 [ 49s] [56/99] cumulate smack-1.3.1-1.3 [ 49s] [57/99] cumulate bzip2-1.0.8-1.3 [ 49s] [58/99] cumulate libfdisk-2.39.3-1.3 [ 49s] [59/99] cumulate libmagic-5.45-1.3 [ 49s] [60/99] cumulate libxml2-2.12.5-1.5 [ 49s] [61/99] cumulate xz-5.4.5-1.6 [ 49s] [62/99] cumulate perl-5.38.0-1.4 [ 49s] [63/99] cumulate build-mkbaselibs-20120927-1.1 [ 49s] [64/99] cumulate libstdc++-devel-14.1.0-1.6 [ 49s] [65/99] cumulate linux-glibc-devel-6.6-1.5 [ 49s] [66/99] cumulate file-5.45-1.3 [ 49s] [67/99] cumulate tar-1.17-1.2 [ 49s] [68/99] cumulate terminfo-base-full-6.4-1.6 [ 49s] [69/99] cumulate autoconf-2.71-1.5 [ 49s] [70/99] cumulate glibc-locale-2.39-1.6 [ 49s] [71/99] cumulate gzip-1.3.12-1.3 [ 49s] [72/99] cumulate libcc1-14.1.0-1.6 [ 49s] [73/99] cumulate libhwasan-14.1.0-1.6 [ 49s] [74/99] cumulate libubsan-14.1.0-1.6 [ 49s] [75/99] cumulate binutils-2.42-1.6 [ 49s] [76/99] cumulate pam-1.1.6-1.3 [ 49s] [77/99] cumulate tzdata-2023c-1.2 [ 49s] [78/99] cumulate libdw-0.189-1.6 [ 49s] [79/99] cumulate libarchive-3.7.2-1.5 [ 49s] [80/99] cumulate automake-1.16.5-1.5 [ 49s] [81/99] cumulate libasm-0.189-1.6 [ 49s] [82/99] cumulate libncurses6-6.4-1.6 [ 49s] [83/99] cumulate build-20120927-1.1 [ 49s] [84/99] cumulate gcc-14.1.0-1.6 [ 49s] [85/99] cumulate libncurses-6.4-1.6 [ 49s] [86/99] cumulate less-643-1.1 [ 49s] [87/99] cumulate libreadline-5.2-1.5 [ 49s] [88/99] cumulate qemu-accel-x86_64-aarch64-0.4-1.2 [ 49s] [89/99] cumulate libtool-2.4.7-1.6 [ 49s] [90/99] cumulate elfutils-0.189-1.6 [ 49s] [91/99] cumulate util-linux-2.39.3-1.3 [ 49s] [92/99] cumulate util-linux-su-2.39.3-1.3 [ 49s] [93/99] cumulate libxcrypt-devel-4.4.36-1.6 [ 49s] [94/99] cumulate nss-3.98-1.6 [ 49s] [95/99] cumulate glibc-devel-2.39-1.6 [ 49s] [96/99] cumulate libsoftokn3-3.98-1.6 [ 49s] [97/99] cumulate rpm-4.14.1.1-1.6 [ 49s] [98/99] cumulate zlib-devel-1.3-1.4 [ 49s] [99/99] cumulate rpm-build-4.14.1.1-1.6 [ 49s] now installing cumulated packages [ 50s] Preparing... ######################################## [ 50s] Updating / installing... [ 50s] setup-0.9-1.2 ######################################## [ 50s] filesystem-3.1-1.1 ######################################## [ 50s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 51s] ######################################## [ 52s] bash-3.2.57-1.1 ######################################## [ 52s] zlib-1.3-1.4 ######################################## [ 52s] libgcc-14.1.0-1.6 ######################################## [ 53s] libstdc++-14.1.0-1.6 ######################################## [ 54s] coreutils-6.9-14.1 ######################################## [ 54s] libbz2-1.0.8-1.3 ######################################## [ 54s] liblzma-5.4.5-1.6 ######################################## [ 55s] libelf-0.189-1.6 ######################################## [ 55s] libdw-0.189-1.6 ######################################## [ 55s] libxcrypt-4.4.36-1.6 ######################################## [ 56s] libblkid-2.39.3-1.3 ######################################## [ 56s] nspr-4.35-1.3 ######################################## [ 57s] pam-1.1.6-1.3 ######################################## [ 57s] libcap-2.69-1.5 ######################################## [ 57s] libfreebl3-3.98-1.6 ######################################## [ 58s] liblua-5.1.5-1.3 ######################################## [ 58s] libpopt-1.16-1.3 ######################################## [ 58s] libuuid-2.39.3-1.3 ######################################## [ 59s] libzstd1-1.5.5-1.3 ######################################## [ 59s] pkg-config-0.29.2-1.4 ######################################## [ 59s] libfdisk-2.39.3-1.3 ######################################## [ 59s] nss-certs-3.98-1.6 ######################################## [ 59s] libmount-2.39.3-1.3 ######################################## [ 60s] libasm-0.189-1.6 ######################################## [ 60s] libxml2-2.12.5-1.5 ######################################## [ 60s] xz-5.4.5-1.6 ######################################## [ 60s] bzip2-1.0.8-1.3 ######################################## [ 61s] linux-glibc-devel-6.6-1.5 ######################################## [ 61s] terminfo-base-full-6.4-1.6 ######################################## [ 62s] libncurses6-6.4-1.6 ######################################## [ 62s] libreadline-5.2-1.5 ######################################## [ 63s] gzip-1.3.12-1.3 ######################################## [ 63s] libcc1-14.1.0-1.6 ######################################## [ 63s] libhwasan-14.1.0-1.6 ######################################## [ 64s] libubsan-14.1.0-1.6 ######################################## [ 64s] libgfortran-14.1.0-1.6 ######################################## [ 65s] binutils-libs-2.42-1.6 ######################################## [ 66s] binutils-2.42-1.6 ######################################## [ 66s] make-4.4-1.3 ######################################## [ 66s] findutils-4.3.8-1.3 ######################################## [ 66s] gdbm-1.8.3-1.6 ######################################## [ 71s] perl-5.38.0-1.4 ######################################## [ 71s] build-mkbaselibs-20120927-1.1 ######################################## [ 71s] libatomic-14.1.0-1.6 ######################################## [ 72s] libattr-2.5.1-1.3 ######################################## [ 72s] libacl-2.3.2-1.3 ######################################## [ 72s] tar-1.17-1.2 ######################################## [ 72s] libgomp-14.1.0-1.6 ######################################## [ 73s] libitm-14.1.0-1.6 ######################################## [ 77s] gcc-14.1.0-1.6 ######################################## [ 77s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 77s] glibc-devel-2.39-1.6 ######################################## [ 78s] libltdl-2.4.7-1.6 ######################################## [ 78s] libopenssl3-3.0.13-1.6 ######################################## [ 79s] libarchive-3.7.2-1.5 ######################################## [ 79s] libpcre-8.45-1.3 ######################################## [ 79s] libsmack-1.3.1-1.3 ######################################## [ 80s] libsmartcols-2.39.3-1.3 ######################################## [ 80s] libsqlite-3.44.0-1.3 ######################################## [ 81s] libsoftokn3-3.98-1.6 ######################################## [ 81s] nss-3.98-1.6 ######################################## [ 81s] m4-1.4.19-1.1 ######################################## [ 82s] autoconf-2.71-1.5 ######################################## [ 82s] automake-1.16.5-1.5 ######################################## [ 82s] patch-2.7.6-1.3 ######################################## [ 82s] sed-4.1c-1.3 ######################################## [ 83s] util-linux-2.39.3-1.3 ######################################## [ 83s] libmagic-data-5.45-1.3 ######################################## [ 83s] libmagic-5.45-1.3 ######################################## [ 84s] rpm-4.14.1.1-1.6 ######################################## [ 84s] rpm-build-4.14.1.1-1.6 ######################################## [ 84s] file-5.45-1.3 ######################################## [ 84s] util-linux-su-2.39.3-1.3 ######################################## [ 84s] libtool-2.4.7-1.6 ######################################## [ 84s] smack-1.3.1-1.3 ######################################## [ 84s] grep-2.5.2-1.3 ######################################## [ 84s] zlib-devel-1.3-1.4 ######################################## [ 100s] qemu-accel-x86_64-aarch64-0.4-1.2 ######################################## [ 101s] build-20120927-1.1 ######################################## [ 101s] libncurses-6.4-1.6 ######################################## [ 101s] less-643-1.1 ######################################## [ 101s] elfutils-0.189-1.6 ######################################## [ 102s] glibc-locale-2.39-1.6 ######################################## [ 102s] tzdata-2023c-1.2 ######################################## [ 103s] libstdc++-devel-14.1.0-1.6 ######################################## [ 105s] cpp-14.1.0-1.6 ######################################## [ 107s] gcc-c++-14.1.0-1.6 ######################################## [ 107s] build-compare-2023.06.18-1.1 ######################################## [ 113s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 114s] gawk-3.1.5-1.1 ######################################## [ 114s] cpio-2.8-1.1 ######################################## [ 114s] diffutils-3.10-1.1 ######################################## [ 114s] hostname-3.23-1.1 ######################################## [ 114s] net-tools-2.0_20121208git-1.3 ######################################## [ 114s] update-alternatives-1.22.2-1.2 ######################################## [ 114s] which-2.17-1.2 ######################################## [ 116s] now finalizing build dir... [ 117s] ----------------------------------------------------------------- [ 117s] I have the following modifications for perl-PerlIO-gzip.spec: [ 117s] 4c4 [ 117s] < Release: 1 [ 117s] --- [ 117s] > Release: 1.1 [ 118s] build target is aarch64-tizen-linux [ 118s] ----------------------------------------------------------------- [ 118s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 118s] ----------------------------------------------------------------- [ 118s] ----------------------------------------------------------------- [ 119s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 126s] Building target platforms: aarch64-tizen-linux [ 126s] Building for target aarch64-tizen-linux [ 126s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.eMiHv4 [ 126s] + umask 022 [ 126s] + cd /home/abuild/rpmbuild/BUILD [ 126s] + cd /home/abuild/rpmbuild/BUILD [ 126s] + rm -rf perl-PerlIO-gzip-0.20 [ 126s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 126s] + /bin/tar -xof - [ 126s] + STATUS=0 [ 126s] + '[' 0 -ne 0 ']' [ 126s] + cd perl-PerlIO-gzip-0.20 [ 126s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 126s] + exit 0 [ 126s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.lDz9YH [ 126s] + umask 022 [ 126s] + cd /home/abuild/rpmbuild/BUILD [ 126s] + cd perl-PerlIO-gzip-0.20 [ 126s] + ref=/usr/lib/rpm [ 126s] + mints=0 [ 126s] + case $(uname -m) in [ 126s] ++ uname -m [ 126s] + mints=20120610 [ 126s] + for s in guess sub [ 126s] ++ find -maxdepth 8 -name config.guess [ 126s] + for s in guess sub [ 126s] ++ find -maxdepth 8 -name config.sub [ 126s] + LANG=C [ 126s] + export LANG [ 126s] + unset DISPLAY [ 126s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 126s] + export CFLAGS [ 126s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 126s] + export CXXFLAGS [ 126s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 126s] + export FFLAGS [ 126s] + LDFLAGS= [ 126s] + export LDFLAGS [ 126s] + perl Makefile.PL [ 128s] Checking if your kit is complete... [ 128s] Looks good [ 129s] Generating a Unix-style Makefile [ 129s] Writing Makefile for PerlIO::gzip [ 129s] Writing MYMETA.yml and MYMETA.json [ 129s] + make [ 136s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 136s] Running Mkbootstrap for gzip () [ 136s] chmod 644 "gzip.bs" [ 136s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 137s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 138s] mv gzip.xsc gzip.c [ 138s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE" gzip.c [ 138s] In file included from gzip.xs:13: [ 138s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 138s] 1059 | #define PERL_USE_SAFE_PUTENV [ 138s] | ^~~~~~~~~~~~~~~~~~~~ [ 138s] : note: this is the location of the previous definition [ 139s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6227: [ 139s] gzip.xs: In function 'PerlIOGzip_getarg': [ 139s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized [-Wmaybe-uninitialized] [ 139s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 139s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 139s] gzip.xs:697:8: note: in expansion of macro 'newSVpv' [ 139s] 697 | sv = newSVpv (mode, 4); [ 139s] | ^~~~~~~ [ 139s] gzip.xs:675:24: note: 'mode' was declared here [ 139s] 675 | register const char *mode; [ 139s] | ^~~~ [ 139s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 139s] LD_RUN_PATH="/lib/../lib64" cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 139s] -lz \ [ 139s] [ 139s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 140s] Manifying 1 pod document [ 141s] + exit 0 [ 141s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.YdYB5r [ 141s] + umask 022 [ 141s] + cd /home/abuild/rpmbuild/BUILD [ 141s] + cd perl-PerlIO-gzip-0.20 [ 141s] + LANG=C [ 141s] + export LANG [ 141s] + unset DISPLAY [ 141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 141s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 141s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 141s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 install_vendor [ 141s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 142s] Manifying 1 pod document [ 144s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 144s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 144s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO/gzip.pm [ 144s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man/man3/PerlIO::gzip.3 [ 144s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/info [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/packages [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/perl-PerlIO-gzip [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/perl-PerlIO-gzip-0.20 [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/gtk-doc [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man [ 145s] + xargs rm -f -- [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 145s] + xargs rm -f -- [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 145s] + xargs rm -f -- [ 145s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 145s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto -name .packlist -print0 [ 145s] + xargs -0 -r rm [ 145s] + '[' aarch64 == noarch ']' [ 145s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 145s] + FILES=perl-PerlIO-gzip.files [ 145s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 145s] + RES= [ 145s] + '[' -n '' ']' [ 145s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ [ 145s] ++ sort [ 145s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] + continue [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 145s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 145s] + el=aarch64-linux-thread-multi [ 145s] + all_dir=(${all_dir[@]} $el) [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 145s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO [ 145s] + el=aarch64-linux-thread-multi/PerlIO [ 145s] + all_dir=(${all_dir[@]} $el) [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 145s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 145s] + el=aarch64-linux-thread-multi/auto [ 145s] + all_dir=(${all_dir[@]} $el) [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 145s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO [ 145s] + el=aarch64-linux-thread-multi/auto/PerlIO [ 145s] + all_dir=(${all_dir[@]} $el) [ 145s] + for dir in '`find ${base_dir} -type d | sort`' [ 145s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 145s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip [ 145s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 145s] + el=aarch64-linux-thread-multi/auto/PerlIO/gzip [ 145s] + all_dir=(${all_dir[@]} $el) [ 145s] + for i in '${all_dir[@]}' [ 145s] + '[' aarch64-linux-thread-multi = auto ']' [ 145s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 145s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi ']' [ 145s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi -maxdepth 1 -type f [ 145s] + RES= [ 145s] + '[' -n '' ']' [ 145s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 145s] + /bin/cat [ 145s] + for i in '${all_dir[@]}' [ 145s] + '[' aarch64-linux-thread-multi/PerlIO = auto ']' [ 145s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 145s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO ']' [ 145s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 145s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm [ 145s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm ']' [ 145s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO [ 145s] + /bin/cat [ 145s] + for file in '$RES' [ 145s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm [ 145s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO/gzip.pm [ 145s] + /bin/cat [ 145s] + for i in '${all_dir[@]}' [ 145s] + '[' aarch64-linux-thread-multi/auto = auto ']' [ 145s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 145s] + continue [ 145s] + for i in '${all_dir[@]}' [ 145s] + '[' aarch64-linux-thread-multi/auto/PerlIO = auto ']' [ 145s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 145s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO ']' [ 145s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 145s] + RES= [ 145s] + '[' -n '' ']' [ 145s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO [ 145s] + /bin/cat [ 145s] + for i in '${all_dir[@]}' [ 145s] + '[' aarch64-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 145s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 145s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip ']' [ 146s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 146s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 146s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 146s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip [ 146s] + /bin/cat [ 146s] + for file in '$RES' [ 146s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 146s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 146s] + /bin/cat [ 146s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man ']' [ 146s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 146s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/bin ']' [ 146s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 146s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 147s] 158 blocks [ 147s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 147s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 147s] + /usr/lib/rpm/check-buildroot [ 147s] + /usr/lib/rpm//brp-compress [ 147s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 148s] + /usr/lib/rpm/brp-python-hardlink [ 148s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 148s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 148s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 148s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 148s] Processing files: perl-PerlIO-gzip-0.20-1.1.aarch64 [ 148s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(aarch-64) = 0.20-1.1 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libz.so.1()(64bit) [ 148s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.aarch64 [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(aarch-64) = 0.20-1.1 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.aarch64 [ 148s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 148s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 148s] [ 148s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(aarch-64) = 0.20-1.1 [ 148s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 148s] Recommends: perl-PerlIO-gzip-debugsource(aarch-64) = 0.20-1.1 [ 148s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 149s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-0.20-1.1.aarch64.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-debugsource-0.20-1.1.aarch64.rpm [ 149s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-debuginfo-0.20-1.1.aarch64.rpm [ 149s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.yFoTBv [ 149s] + umask 022 [ 149s] + cd /home/abuild/rpmbuild/BUILD [ 149s] + cd perl-PerlIO-gzip-0.20 [ 149s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 149s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 149s] + exit 0 [ 150s] ... checking for files with abuild user/group [ 150s] ... creating baselibs [ 152s] [ 152s] c064868841dc finished "build perl-PerlIO-gzip.spec" at Sat May 25 10:52:04 UTC 2024. [ 152s]