[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.14 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 1s] [ 1s] c064868841dc started "build python3-nose.spec" at Sat May 25 10:36:26 UTC 2024. [ 1s] [ 1s] Building python3-nose for project 'Tizen-Base-Toolchain' repository 'standard' arch 'aarch64' srcmd5 'ab14c63cc27d121f55398c8fbbbf79ef' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.14/.build-srcdir/python3-nose.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.14/.build-srcdir/python3-nose.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/14/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.14/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.14/.build-srcdir/python3-nose.spec build ... [ 3s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/42] preinstalling libmagic-data... [ 6s] [2/42] preinstalling libncurses... [ 6s] [3/42] preinstalling setup... [ 6s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 7s] [6/42] preinstalling bash... [ 8s] [7/42] preinstalling diffutils... [ 8s] [8/42] preinstalling grep... [ 8s] [9/42] preinstalling libattr... [ 8s] [10/42] preinstalling libblkid... [ 8s] [11/42] preinstalling libbz2... [ 8s] [12/42] preinstalling libfreebl3... [ 9s] [13/42] preinstalling libgcc... [ 9s] [14/42] preinstalling liblua... [ 9s] [15/42] preinstalling liblzma... [ 9s] [16/42] preinstalling libpopt... [ 10s] [17/42] preinstalling libreadline... [ 10s] [18/42] preinstalling libsmack... [ 10s] [19/42] preinstalling libsqlite... [ 10s] [20/42] preinstalling libuuid... [ 10s] [21/42] preinstalling libxcrypt... [ 11s] [22/42] preinstalling libzstd1... [ 11s] [23/42] preinstalling nspr... [ 11s] [24/42] preinstalling sed... [ 11s] [25/42] preinstalling zlib... [ 11s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 32s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 37s] [28/42] preinstalling coreutils... [ 38s] [29/42] preinstalling libacl... [ 38s] [30/42] preinstalling libcap... [ 38s] [31/42] preinstalling libelf... [ 38s] [32/42] preinstalling libmount... [ 38s] [33/42] preinstalling smack... [ 39s] [34/42] preinstalling bzip2... [ 39s] [35/42] preinstalling libmagic... [ 39s] [36/42] preinstalling libxml2... [ 40s] [37/42] preinstalling tar... [ 40s] [38/42] preinstalling util-linux... [ 40s] [39/42] preinstalling util-linux-su... [ 40s] [40/42] preinstalling nss... [ 41s] [41/42] preinstalling libsoftokn3... [ 41s] [42/42] preinstalling rpm... [ 42s] running qemu-linux-user-x86_64-cross postinstall script [ 43s] running qemu-accel-x86_64-aarch64 postinstall script [ 43s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.1.0/liblto_plugin.so': No such file or directory [ 43s] running setup postinstall script [ 43s] chroot: failed to run command '': No such file or directory [ 43s] initializing rpm db... [ 44s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 44s] breaking dependency libxcrypt-devel -> glibc-devel [ 44s] cycle: libsoftokn3 -> nss [ 44s] breaking dependency nss -> libsoftokn3 [ 44s] done [ 44s] querying package ids... [ 45s] [1/105] cumulate libmagic-data-5.45-1.3 [ 45s] [2/105] cumulate setup-0.9-1.2 [ 45s] [3/105] cumulate filesystem-3.1-1.1 [ 45s] [4/105] cumulate glibc-2.39-1.6 [ 45s] [5/105] cumulate bash-3.2.57-1.1 [ 45s] [6/105] cumulate cpio-2.8-1.2 [ 45s] [7/105] cumulate diffutils-3.10-1.2 [ 45s] [8/105] cumulate findutils-4.3.8-1.3 [ 45s] [9/105] cumulate gdbm-1.8.3-1.6 [ 45s] [10/105] cumulate hostname-3.23-1.2 [ 45s] [11/105] cumulate libatomic-14.1.0-1.6 [ 45s] [12/105] cumulate libattr-2.5.1-1.3 [ 45s] [13/105] cumulate libblkid-2.39.3-1.3 [ 45s] [14/105] cumulate libbz2-1.0.8-1.3 [ 45s] [15/105] cumulate libexpat-2.6.2-1.5 [ 45s] [16/105] cumulate libffi-3.4.2-1.5 [ 45s] [17/105] cumulate libfreebl3-3.98-1.6 [ 45s] [18/105] cumulate libgcc-14.1.0-1.6 [ 45s] [19/105] cumulate libgomp-14.1.0-1.6 [ 45s] [20/105] cumulate libitm-14.1.0-1.6 [ 45s] [21/105] cumulate libltdl-2.4.7-1.6 [ 45s] [22/105] cumulate liblua-5.1.5-1.3 [ 45s] [23/105] cumulate liblzma-5.4.5-1.6 [ 45s] [24/105] cumulate libopenssl3-3.0.13-1.6 [ 45s] [25/105] cumulate libpcre-8.45-1.3 [ 45s] [26/105] cumulate libpopt-1.16-1.3 [ 45s] [27/105] cumulate libpython3_121_0-3.12.0-1.5 [ 45s] [28/105] cumulate libsmack-1.3.1-1.3 [ 45s] [29/105] cumulate libsmartcols-2.39.3-1.3 [ 45s] [30/105] cumulate libsqlite-3.44.0-1.3 [ 45s] [31/105] cumulate libuuid-2.39.3-1.3 [ 45s] [32/105] cumulate libxcrypt-4.4.36-1.6 [ 45s] [33/105] cumulate libzstd1-1.5.5-1.3 [ 45s] [34/105] cumulate m4-1.4.19-1.1 [ 45s] [35/105] cumulate net-tools-2.0_20121208git-1.3 [ 45s] [36/105] cumulate nspr-4.35-1.3 [ 45s] [37/105] cumulate patch-2.7.6-1.3 [ 45s] [38/105] cumulate pkg-config-0.29.2-1.4 [ 45s] [39/105] cumulate sed-4.1c-1.3 [ 45s] [40/105] cumulate update-alternatives-1.22.2-1.2 [ 45s] [41/105] cumulate which-2.17-1.2 [ 45s] [42/105] cumulate zlib-1.3-1.4 [ 45s] [43/105] cumulate build-compare-2023.06.18-1.2 [ 45s] [44/105] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.2 [ 45s] [45/105] cumulate binutils-libs-2.42-1.6 [ 45s] [46/105] cumulate coreutils-6.9-14.2 [ 45s] [47/105] cumulate cpp-14.1.0-1.6 [ 45s] [48/105] cumulate gawk-3.1.5-1.2 [ 45s] [49/105] cumulate gcc-c++-14.1.0-1.6 [ 45s] [50/105] cumulate grep-2.5.2-1.3 [ 45s] [51/105] cumulate libacl-2.3.2-1.3 [ 45s] [52/105] cumulate libcap-2.69-1.5 [ 45s] [53/105] cumulate libelf-0.189-1.6 [ 45s] [54/105] cumulate libgfortran-14.1.0-1.6 [ 45s] [55/105] cumulate libmount-2.39.3-1.3 [ 45s] [56/105] cumulate libstdc++-14.1.0-1.6 [ 45s] [57/105] cumulate make-4.4-1.3 [ 45s] [58/105] cumulate nss-certs-3.98-1.6 [ 45s] [59/105] cumulate smack-1.3.1-1.3 [ 45s] [60/105] cumulate bzip2-1.0.8-1.3 [ 45s] [61/105] cumulate libfdisk-2.39.3-1.3 [ 45s] [62/105] cumulate libmagic-5.45-1.3 [ 45s] [63/105] cumulate libxml2-2.12.5-1.5 [ 45s] [64/105] cumulate xz-5.4.5-1.6 [ 45s] [65/105] cumulate perl-5.38.0-1.4 [ 45s] [66/105] cumulate build-mkbaselibs-20120927-1.1 [ 45s] [67/105] cumulate libstdc++-devel-14.1.0-1.6 [ 45s] [68/105] cumulate linux-glibc-devel-6.6-1.5 [ 45s] [69/105] cumulate file-5.45-1.3 [ 45s] [70/105] cumulate tar-1.17-1.2 [ 45s] [71/105] cumulate terminfo-base-full-6.4-1.6 [ 45s] [72/105] cumulate autoconf-2.71-1.5 [ 45s] [73/105] cumulate glibc-locale-2.39-1.6 [ 45s] [74/105] cumulate gzip-1.3.12-1.3 [ 45s] [75/105] cumulate libcc1-14.1.0-1.6 [ 45s] [76/105] cumulate libhwasan-14.1.0-1.6 [ 45s] [77/105] cumulate libubsan-14.1.0-1.6 [ 45s] [78/105] cumulate binutils-2.42-1.6 [ 45s] [79/105] cumulate pam-1.1.6-1.3 [ 45s] [80/105] cumulate tzdata-2023c-1.2 [ 45s] [81/105] cumulate libdw-0.189-1.6 [ 45s] [82/105] cumulate libarchive-3.7.2-1.5 [ 45s] [83/105] cumulate automake-1.16.5-1.5 [ 45s] [84/105] cumulate libasm-0.189-1.6 [ 45s] [85/105] cumulate libncurses6-6.4-1.6 [ 45s] [86/105] cumulate build-20120927-1.1 [ 45s] [87/105] cumulate gcc-14.1.0-1.6 [ 45s] [88/105] cumulate libncurses-6.4-1.6 [ 45s] [89/105] cumulate less-643-1.2 [ 45s] [90/105] cumulate libreadline-5.2-1.5 [ 45s] [91/105] cumulate qemu-accel-x86_64-aarch64-0.4-1.2 [ 45s] [92/105] cumulate libtool-2.4.7-1.6 [ 45s] [93/105] cumulate elfutils-0.189-1.6 [ 45s] [94/105] cumulate python3-base-3.12.0-1.5 [ 45s] [95/105] cumulate util-linux-2.39.3-1.3 [ 45s] [96/105] cumulate python3-3.12.0-1.1 [ 45s] [97/105] cumulate util-linux-su-2.39.3-1.3 [ 45s] [98/105] cumulate python3-devel-3.12.0-1.5 [ 45s] [99/105] cumulate python3-setuptools-69.0.2-1.1 [ 45s] [100/105] cumulate libxcrypt-devel-4.4.36-1.6 [ 45s] [101/105] cumulate nss-3.98-1.6 [ 45s] [102/105] cumulate glibc-devel-2.39-1.6 [ 45s] [103/105] cumulate libsoftokn3-3.98-1.6 [ 45s] [104/105] cumulate rpm-4.14.1.1-1.6 [ 45s] [105/105] cumulate rpm-build-4.14.1.1-1.6 [ 45s] now installing cumulated packages [ 47s] Preparing... ######################################## [ 47s] Updating / installing... [ 47s] setup-0.9-1.2 ######################################## [ 47s] filesystem-3.1-1.1 ######################################## [ 48s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 48s] ######################################## [ 49s] bash-3.2.57-1.1 ######################################## [ 49s] zlib-1.3-1.4 ######################################## [ 49s] libgcc-14.1.0-1.6 ######################################## [ 50s] libstdc++-14.1.0-1.6 ######################################## [ 51s] coreutils-6.9-14.2 ######################################## [ 51s] libbz2-1.0.8-1.3 ######################################## [ 51s] liblzma-5.4.5-1.6 ######################################## [ 52s] libelf-0.189-1.6 ######################################## [ 52s] libxcrypt-4.4.36-1.6 ######################################## [ 53s] libdw-0.189-1.6 ######################################## [ 53s] libblkid-2.39.3-1.3 ######################################## [ 53s] nspr-4.35-1.3 ######################################## [ 54s] pam-1.1.6-1.3 ######################################## [ 54s] libcap-2.69-1.5 ######################################## [ 55s] gdbm-1.8.3-1.6 ######################################## [ 62s] perl-5.38.0-1.4 ######################################## [ 62s] libfreebl3-3.98-1.6 ######################################## [ 62s] liblua-5.1.5-1.3 ######################################## [ 63s] libopenssl3-3.0.13-1.6 ######################################## [ 64s] libpopt-1.16-1.3 ######################################## [ 64s] libpython3_121_0-3.12.0-1.5 ######################################## [ 64s] libsqlite-3.44.0-1.3 ######################################## [ 65s] libuuid-2.39.3-1.3 ######################################## [ 65s] libzstd1-1.5.5-1.3 ######################################## [ 65s] pkg-config-0.29.2-1.4 ######################################## [ 65s] libfdisk-2.39.3-1.3 ######################################## [ 65s] build-mkbaselibs-20120927-1.1 ######################################## [ 65s] nss-certs-3.98-1.6 ######################################## [ 65s] libsoftokn3-3.98-1.6 ######################################## [ 66s] nss-3.98-1.6 ######################################## [ 66s] libmount-2.39.3-1.3 ######################################## [ 66s] libasm-0.189-1.6 ######################################## [ 66s] libxml2-2.12.5-1.5 ######################################## [ 67s] xz-5.4.5-1.6 ######################################## [ 67s] bzip2-1.0.8-1.3 ######################################## [ 67s] linux-glibc-devel-6.6-1.5 ######################################## [ 67s] terminfo-base-full-6.4-1.6 ######################################## [ 67s] libncurses6-6.4-1.6 ######################################## [ 68s] libreadline-5.2-1.5 ######################################## [ 68s] gzip-1.3.12-1.3 ######################################## [ 68s] libcc1-14.1.0-1.6 ######################################## [ 68s] libhwasan-14.1.0-1.6 ######################################## [ 69s] libubsan-14.1.0-1.6 ######################################## [ 69s] libgfortran-14.1.0-1.6 ######################################## [ 69s] binutils-libs-2.42-1.6 ######################################## [ 71s] binutils-2.42-1.6 ######################################## [ 71s] make-4.4-1.3 ######################################## [ 71s] findutils-4.3.8-1.3 ######################################## [ 71s] libatomic-14.1.0-1.6 ######################################## [ 71s] libattr-2.5.1-1.3 ######################################## [ 72s] libacl-2.3.2-1.3 ######################################## [ 72s] tar-1.17-1.2 ######################################## [ 72s] libarchive-3.7.2-1.5 ######################################## [ 72s] libexpat-2.6.2-1.5 ######################################## [ 73s] libffi-3.4.2-1.5 ######################################## [ 75s] python3-base-3.12.0-1.5 ######################################## [ 75s] python3-3.12.0-1.1 ######################################## [ 75s] libgomp-14.1.0-1.6 ######################################## [ 75s] libitm-14.1.0-1.6 ######################################## [ 81s] gcc-14.1.0-1.6 ######################################## [ 81s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 81s] glibc-devel-2.39-1.6 ######################################## [ 81s] libltdl-2.4.7-1.6 ######################################## [ 82s] libpcre-8.45-1.3 ######################################## [ 82s] libsmack-1.3.1-1.3 ######################################## [ 82s] libsmartcols-2.39.3-1.3 ######################################## [ 83s] m4-1.4.19-1.1 ######################################## [ 83s] autoconf-2.71-1.5 ######################################## [ 83s] automake-1.16.5-1.5 ######################################## [ 84s] patch-2.7.6-1.3 ######################################## [ 84s] sed-4.1c-1.3 ######################################## [ 84s] util-linux-2.39.3-1.3 ######################################## [ 85s] libmagic-data-5.45-1.3 ######################################## [ 85s] libmagic-5.45-1.3 ######################################## [ 86s] rpm-4.14.1.1-1.6 ######################################## [ 86s] rpm-build-4.14.1.1-1.6 ######################################## [ 86s] file-5.45-1.3 ######################################## [ 86s] util-linux-su-2.39.3-1.3 ######################################## [ 86s] libtool-2.4.7-1.6 ######################################## [ 87s] smack-1.3.1-1.3 ######################################## [ 87s] grep-2.5.2-1.3 ######################################## [ 116s] qemu-accel-x86_64-aarch64-0.4-1.2 ######################################## [ 118s] python3-setuptools-69.0.2-1.1 ######################################## [ 118s] python3-devel-3.12.0-1.5 ######################################## [ 118s] build-20120927-1.1 ######################################## [ 118s] libncurses-6.4-1.6 ######################################## [ 118s] less-643-1.2 ######################################## [ 118s] elfutils-0.189-1.6 ######################################## [ 119s] glibc-locale-2.39-1.6 ######################################## [ 119s] tzdata-2023c-1.2 ######################################## [ 120s] libstdc++-devel-14.1.0-1.6 ######################################## [ 124s] cpp-14.1.0-1.6 ######################################## [ 126s] gcc-c++-14.1.0-1.6 ######################################## [ 126s] build-compare-2023.06.18-1.2 ######################################## [ 134s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 135s] gawk-3.1.5-1.2 ######################################## [ 135s] cpio-2.8-1.2 ######################################## [ 135s] diffutils-3.10-1.2 ######################################## [ 135s] hostname-3.23-1.2 ######################################## [ 135s] net-tools-2.0_20121208git-1.3 ######################################## [ 135s] update-alternatives-1.22.2-1.2 ######################################## [ 135s] which-2.17-1.2 ######################################## [ 137s] now finalizing build dir... [ 139s] ----------------------------------------------------------------- [ 139s] I have the following modifications for python3-nose.spec: [ 139s] 4c4 [ 139s] < Release: 0 [ 139s] --- [ 139s] > Release: 1.1 [ 140s] build target is aarch64-tizen-linux [ 140s] ----------------------------------------------------------------- [ 140s] ----- building python3-nose.spec (user abuild) [ 140s] ----------------------------------------------------------------- [ 140s] ----------------------------------------------------------------- [ 141s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/ab14c63cc27d121f55398c8fbbbf79ef-python3-nose' /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 141s] Building target platforms: aarch64-tizen-linux [ 141s] Building for target aarch64-tizen-linux [ 141s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.hsHKnR [ 141s] + umask 022 [ 141s] + cd /home/abuild/rpmbuild/BUILD [ 141s] + cd /home/abuild/rpmbuild/BUILD [ 141s] + rm -rf nose-1.2.1 [ 141s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nose-1.2.1.tar.gz [ 141s] + /bin/tar -xof - [ 141s] + STATUS=0 [ 141s] + '[' 0 -ne 0 ']' [ 141s] + cd nose-1.2.1 [ 141s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 141s] + cp /home/abuild/rpmbuild/SOURCES/python3-nose.manifest . [ 141s] + sed -i s,man/man1,share/man/man1, setup.py [ 141s] + exit 0 [ 141s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.M8TBAC [ 141s] + umask 022 [ 141s] + cd /home/abuild/rpmbuild/BUILD [ 141s] + cd nose-1.2.1 [ 141s] + ref=/usr/lib/rpm [ 141s] + mints=0 [ 141s] + case $(uname -m) in [ 141s] ++ uname -m [ 141s] + mints=20120610 [ 141s] + for s in guess sub [ 141s] ++ find -maxdepth 8 -name config.guess [ 141s] + for s in guess sub [ 141s] ++ find -maxdepth 8 -name config.sub [ 141s] + LANG=C [ 141s] + export LANG [ 141s] + unset DISPLAY [ 141s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 141s] + export CFLAGS [ 141s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 141s] + export CXXFLAGS [ 141s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 141s] + export FFLAGS [ 141s] + LDFLAGS= [ 141s] + export LDFLAGS [ 141s] + /usr/bin/python3 setup.py build [ 141s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 141s] "sys.exit\(\n" [ 141s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 141s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 141s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 141s] "\)\n") [ 145s] + exit 0 [ 145s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ElFNeu [ 145s] + umask 022 [ 145s] + cd /home/abuild/rpmbuild/BUILD [ 145s] + cd nose-1.2.1 [ 145s] + LANG=C [ 145s] + export LANG [ 145s] + unset DISPLAY [ 145s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 145s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 145s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 145s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 145s] "sys.exit\(\n" [ 146s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 146s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 146s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 146s] "\)\n") [ 147s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 147s] !! [ 147s] [ 147s] ******************************************************************************** [ 147s] Please avoid running ``setup.py`` directly. [ 147s] Instead, use pypa/build, pypa/installer or other [ 147s] standards-based tools. [ 147s] [ 147s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 147s] ******************************************************************************** [ 147s] [ 147s] !! [ 147s] self.initialize_options() [ 148s] File "/usr/lib/python3.12/site-packages/nose/ext/dtcompat.py", line 344 [ 148s] raise TypeError, 'Expected a module: %r' % module [ 148s] ^ [ 148s] SyntaxError: invalid syntax [ 148s] [ 148s] File "/usr/lib/python3.12/site-packages/nose/failure.py", line 37 [ 148s] raise self.exc_class, self.exc_val, self.tb [ 148s] ^ [ 148s] SyntaxError: invalid syntax [ 148s] [ 148s] File "/usr/lib/python3.12/site-packages/nose/twistedtools.py", line 169 [ 148s] raise exc_type, exc_value, tb [ 148s] ^ [ 148s] SyntaxError: invalid syntax [ 148s] [ 148s] File "/usr/lib/python3.12/site-packages/nose/inspector.py", line 41 [ 148s] except tokenize.TokenError, e: [ 148s] ^^^^^^^^^^^^^^^^^^^^^^ [ 148s] SyntaxError: multiple exception types must be parenthesized [ 148s] [ 148s] File "/usr/lib/python3.12/site-packages/nose/core.py", line 143 [ 148s] print "%s version %s" % (os.path.basename(sys.argv[0]), __version__) [ 148s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 148s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 148s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/plugins/plugintest.py", line 407 [ 149s] print munge_nose_output_for_doctest(out) [ 149s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 149s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 149s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/plugins/doctests.py", line 277 [ 149s] except ImportError, e: [ 149s] ^^^^^^^^^^^^^^ [ 149s] SyntaxError: multiple exception types must be parenthesized [ 149s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/plugins/multiprocess.py", line 466 [ 149s] except (KeyboardInterrupt, SystemExit), e: [ 149s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 149s] SyntaxError: multiple exception types must be parenthesized [ 149s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/plugins/manager.py", line 390 [ 149s] except Exception, e: [ 149s] ^^^^^^^^^^^^ [ 149s] SyntaxError: multiple exception types must be parenthesized [ 149s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/plugins/base.py", line 70 [ 149s] except OptionConflictError, e: [ 149s] ^^^^^^^^^^^^^^^^^^^^^^ [ 149s] SyntaxError: multiple exception types must be parenthesized [ 149s] [ 149s] File "/usr/lib/python3.12/site-packages/nose/config.py", line 66 [ 149s] except ConfigParser.Error, exc: [ 149s] ^^^^^^^^^^^^^^^^^^^^^^^ [ 149s] SyntaxError: multiple exception types must be parenthesized [ 149s] [ 149s] no previously-included directories found matching 'doc/.build' [ 151s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.1-1.1 --unique-debug-src-base python3-nose-1.2.1-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/nose-1.2.1 [ 151s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debuginfo.manifest [ 151s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debugsource.manifest [ 151s] + /usr/lib/rpm/check-buildroot [ 152s] + /usr/lib/rpm//brp-compress [ 152s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 153s] + /usr/lib/rpm/brp-python-hardlink [ 161s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 161s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/nose-1.2.1/isu.list [ 161s] ~/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 ~/rpmbuild/BUILD/nose-1.2.1 [ 161s] ~/rpmbuild/BUILD/nose-1.2.1 [ 161s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.PLji6s [ 161s] + umask 022 [ 161s] + cd /home/abuild/rpmbuild/BUILD [ 161s] + cd nose-1.2.1 [ 161s] + exit 0 [ 161s] Processing files: python3-nose-1.2.1-1.1.noarch [ 161s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 161s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 161s] [ 161s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.HqHKhN [ 161s] + umask 022 [ 161s] + cd /home/abuild/rpmbuild/BUILD [ 161s] + cd nose-1.2.1 [ 161s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 161s] + export LC_ALL=C [ 161s] + LC_ALL=C [ 161s] + export DOCDIR [ 161s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 161s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 161s] + cp -pr README.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 161s] + cp -pr lgpl.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 161s] + exit 0 [ 165s] Provides: python3-nose = 1.2.1-1.1 [ 165s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 165s] Requires: /usr/bin/python3 [ 165s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 165s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-nose-1.2.1-1.1.src.rpm [ 166s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-nose-1.2.1-1.1.noarch.rpm [ 166s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9wbGiv [ 166s] + umask 022 [ 166s] + cd /home/abuild/rpmbuild/BUILD [ 166s] + cd nose-1.2.1 [ 166s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 166s] + exit 0 [ 166s] ... checking for files with abuild user/group [ 166s] ... creating baselibs [ 168s] [ 168s] c064868841dc finished "build python3-nose.spec" at Sat May 25 10:39:13 UTC 2024. [ 168s]