[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] c064868841dc started "build python3-pygments.spec" at Sat May 25 11:17:04 UTC 2024. [ 0s] [ 0s] Building python3-pygments for project 'Tizen-Base-Toolchain' repository 'standard' arch 'aarch64' srcmd5 'ace0224db7ca624500488da785307792' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/17/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.17/.build-srcdir/python3-pygments.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/42] preinstalling libmagic-data... [ 3s] [2/42] preinstalling libncurses... [ 3s] [3/42] preinstalling setup... [ 3s] [4/42] preinstalling filesystem... [ 3s] [5/42] preinstalling glibc... [ 4s] [6/42] preinstalling bash... [ 4s] [7/42] preinstalling diffutils... [ 4s] [8/42] preinstalling grep... [ 4s] [9/42] preinstalling libattr... [ 4s] [10/42] preinstalling libblkid... [ 4s] [11/42] preinstalling libbz2... [ 4s] [12/42] preinstalling libfreebl3... [ 4s] [13/42] preinstalling libgcc... [ 5s] [14/42] preinstalling liblua... [ 5s] [15/42] preinstalling liblzma... [ 5s] [16/42] preinstalling libpopt... [ 5s] [17/42] preinstalling libreadline... [ 5s] [18/42] preinstalling libsmack... [ 5s] [19/42] preinstalling libsqlite... [ 5s] [20/42] preinstalling libuuid... [ 5s] [21/42] preinstalling libxcrypt... [ 5s] [22/42] preinstalling libzstd1... [ 5s] [23/42] preinstalling nspr... [ 5s] [24/42] preinstalling sed... [ 5s] [25/42] preinstalling zlib... [ 5s] [26/42] preinstalling qemu-accel-x86_64-aarch64... [ 20s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 29s] [28/42] preinstalling coreutils... [ 29s] [29/42] preinstalling libacl... [ 29s] [30/42] preinstalling libcap... [ 29s] [31/42] preinstalling libelf... [ 29s] [32/42] preinstalling libmount... [ 29s] [33/42] preinstalling smack... [ 29s] [34/42] preinstalling bzip2... [ 29s] [35/42] preinstalling libmagic... [ 29s] [36/42] preinstalling libxml2... [ 30s] [37/42] preinstalling tar... [ 30s] [38/42] preinstalling util-linux... [ 30s] [39/42] preinstalling util-linux-su... [ 30s] [40/42] preinstalling nss... [ 30s] [41/42] preinstalling libsoftokn3... [ 31s] [42/42] preinstalling rpm... [ 31s] running qemu-linux-user-x86_64-cross postinstall script [ 32s] running qemu-accel-x86_64-aarch64 postinstall script [ 32s] mv: cannot stat `/usr/lib64/gcc/aarch64-tizen-linux-gnu/14.1.0/liblto_plugin.so': No such file or directory [ 32s] running setup postinstall script [ 32s] chroot: failed to run command '': No such file or directory [ 32s] initializing rpm db... [ 32s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 32s] breaking dependency libxcrypt-devel -> glibc-devel [ 32s] cycle: libsoftokn3 -> nss [ 32s] breaking dependency nss -> libsoftokn3 [ 32s] done [ 32s] querying package ids... [ 33s] [1/117] cumulate libmagic-data-5.45-1.3 [ 33s] [2/117] cumulate python3-editables-0.5-1.1 [ 33s] [3/117] cumulate python3-pathspec-0.12.1-1.1 [ 33s] [4/117] cumulate python3-pluggy-1.3.0-1.1 [ 33s] [5/117] cumulate python3-pyparsing-3.1.1-1.1 [ 33s] [6/117] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 33s] [7/117] cumulate python3-six-1.16.0-1.1 [ 33s] [8/117] cumulate python3-trove_classifiers-2023.11.29-1.1 [ 33s] [9/117] cumulate python3-typing_extensions-4.9.0-1.1 [ 33s] [10/117] cumulate setup-0.9-1.1 [ 33s] [11/117] cumulate filesystem-3.1-1.1 [ 33s] [12/117] cumulate python3-packaging-23.2-1.1 [ 33s] [13/117] cumulate glibc-2.39-1.6 [ 33s] [14/117] cumulate bash-3.2.57-1.1 [ 33s] [15/117] cumulate cpio-2.8-1.1 [ 33s] [16/117] cumulate diffutils-3.10-1.1 [ 33s] [17/117] cumulate findutils-4.3.8-1.3 [ 33s] [18/117] cumulate gdbm-1.8.3-1.6 [ 33s] [19/117] cumulate hostname-3.23-1.1 [ 33s] [20/117] cumulate libatomic-14.1.0-1.6 [ 33s] [21/117] cumulate libattr-2.5.1-1.3 [ 33s] [22/117] cumulate libblkid-2.39.3-1.3 [ 33s] [23/117] cumulate libbz2-1.0.8-1.3 [ 33s] [24/117] cumulate libexpat-2.6.2-1.5 [ 33s] [25/117] cumulate libffi-3.4.2-1.5 [ 33s] [26/117] cumulate libfreebl3-3.98-1.6 [ 33s] [27/117] cumulate libgcc-14.1.0-1.6 [ 33s] [28/117] cumulate libgomp-14.1.0-1.6 [ 33s] [29/117] cumulate libitm-14.1.0-1.6 [ 33s] [30/117] cumulate libltdl-2.4.7-1.6 [ 33s] [31/117] cumulate liblua-5.1.5-1.3 [ 33s] [32/117] cumulate liblzma-5.4.5-1.6 [ 33s] [33/117] cumulate libopenssl3-3.0.13-1.6 [ 33s] [34/117] cumulate libpcre-8.45-1.3 [ 33s] [35/117] cumulate libpopt-1.16-1.3 [ 33s] [36/117] cumulate libpython3_121_0-3.12.0-1.5 [ 33s] [37/117] cumulate libsmack-1.3.1-1.3 [ 33s] [38/117] cumulate libsmartcols-2.39.3-1.3 [ 33s] [39/117] cumulate libsqlite-3.44.0-1.3 [ 33s] [40/117] cumulate libuuid-2.39.3-1.3 [ 33s] [41/117] cumulate libxcrypt-4.4.36-1.6 [ 33s] [42/117] cumulate libzstd1-1.5.5-1.3 [ 33s] [43/117] cumulate m4-1.4.19-1.1 [ 33s] [44/117] cumulate net-tools-2.0_20121208git-1.3 [ 33s] [45/117] cumulate nspr-4.35-1.3 [ 33s] [46/117] cumulate patch-2.7.6-1.3 [ 33s] [47/117] cumulate pkg-config-0.29.2-1.4 [ 33s] [48/117] cumulate sed-4.1c-1.3 [ 33s] [49/117] cumulate update-alternatives-1.22.2-1.1 [ 33s] [50/117] cumulate which-2.17-1.1 [ 33s] [51/117] cumulate zlib-1.3-1.4 [ 33s] [52/117] cumulate build-compare-2023.06.18-1.1 [ 33s] [53/117] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.2 [ 33s] [54/117] cumulate binutils-libs-2.42-1.6 [ 33s] [55/117] cumulate coreutils-6.9-14.1 [ 33s] [56/117] cumulate cpp-14.1.0-1.6 [ 33s] [57/117] cumulate gawk-3.1.5-1.1 [ 33s] [58/117] cumulate gcc-c++-14.1.0-1.6 [ 33s] [59/117] cumulate grep-2.5.2-1.3 [ 33s] [60/117] cumulate libacl-2.3.2-1.3 [ 33s] [61/117] cumulate libcap-2.69-1.5 [ 33s] [62/117] cumulate libelf-0.189-1.6 [ 33s] [63/117] cumulate libgfortran-14.1.0-1.6 [ 33s] [64/117] cumulate libmount-2.39.3-1.3 [ 33s] [65/117] cumulate libstdc++-14.1.0-1.6 [ 33s] [66/117] cumulate make-4.4-1.3 [ 33s] [67/117] cumulate nss-certs-3.98-1.6 [ 33s] [68/117] cumulate smack-1.3.1-1.3 [ 33s] [69/117] cumulate bzip2-1.0.8-1.3 [ 33s] [70/117] cumulate libfdisk-2.39.3-1.3 [ 33s] [71/117] cumulate libmagic-5.45-1.3 [ 33s] [72/117] cumulate libxml2-2.12.5-1.5 [ 33s] [73/117] cumulate xz-5.4.5-1.6 [ 33s] [74/117] cumulate perl-5.38.0-1.4 [ 33s] [75/117] cumulate build-mkbaselibs-20120927-1.1 [ 33s] [76/117] cumulate libstdc++-devel-14.1.0-1.6 [ 33s] [77/117] cumulate linux-glibc-devel-6.6-1.5 [ 33s] [78/117] cumulate file-5.45-1.3 [ 33s] [79/117] cumulate tar-1.17-1.1 [ 33s] [80/117] cumulate terminfo-base-full-6.4-1.6 [ 33s] [81/117] cumulate autoconf-2.71-1.5 [ 33s] [82/117] cumulate glibc-locale-2.39-1.6 [ 33s] [83/117] cumulate gzip-1.3.12-1.3 [ 33s] [84/117] cumulate libcc1-14.1.0-1.6 [ 33s] [85/117] cumulate libhwasan-14.1.0-1.6 [ 33s] [86/117] cumulate libubsan-14.1.0-1.6 [ 33s] [87/117] cumulate binutils-2.42-1.6 [ 33s] [88/117] cumulate pam-1.1.6-1.3 [ 33s] [89/117] cumulate tzdata-2023c-1.1 [ 33s] [90/117] cumulate libdw-0.189-1.6 [ 33s] [91/117] cumulate libarchive-3.7.2-1.5 [ 33s] [92/117] cumulate automake-1.16.5-1.5 [ 33s] [93/117] cumulate libasm-0.189-1.6 [ 33s] [94/117] cumulate libncurses6-6.4-1.6 [ 33s] [95/117] cumulate build-20120927-1.1 [ 33s] [96/117] cumulate gcc-14.1.0-1.6 [ 33s] [97/117] cumulate libncurses-6.4-1.6 [ 33s] [98/117] cumulate less-643-1.1 [ 33s] [99/117] cumulate libreadline-5.2-1.5 [ 33s] [100/117] cumulate qemu-accel-x86_64-aarch64-0.4-1.2 [ 33s] [101/117] cumulate libtool-2.4.7-1.6 [ 33s] [102/117] cumulate elfutils-0.189-1.6 [ 33s] [103/117] cumulate python3-base-3.12.0-1.5 [ 33s] [104/117] cumulate util-linux-2.39.3-1.3 [ 33s] [105/117] cumulate python3-3.12.0-1.1 [ 33s] [106/117] cumulate python3-build-1.0.3-1.1 [ 33s] [107/117] cumulate util-linux-su-2.39.3-1.3 [ 33s] [108/117] cumulate python3-devel-3.12.0-1.5 [ 33s] [109/117] cumulate python3-hatchling-1.21.0-1.1 [ 33s] [110/117] cumulate python3-setuptools-69.0.2-1.1 [ 33s] [111/117] cumulate python3-pip-23.3.1-1.1 [ 33s] [112/117] cumulate libxcrypt-devel-4.4.36-1.6 [ 33s] [113/117] cumulate nss-3.98-1.6 [ 33s] [114/117] cumulate glibc-devel-2.39-1.6 [ 33s] [115/117] cumulate libsoftokn3-3.98-1.6 [ 33s] [116/117] cumulate rpm-4.14.1.1-1.6 [ 33s] [117/117] cumulate rpm-build-4.14.1.1-1.6 [ 33s] now installing cumulated packages [ 39s] Preparing... ######################################## [ 39s] Updating / installing... [ 39s] setup-0.9-1.1 ######################################## [ 39s] filesystem-3.1-1.1 ######################################## [ 39s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 40s] ######################################## [ 40s] bash-3.2.57-1.1 ######################################## [ 40s] zlib-1.3-1.4 ######################################## [ 41s] libgcc-14.1.0-1.6 ######################################## [ 41s] libstdc++-14.1.0-1.6 ######################################## [ 43s] coreutils-6.9-14.1 ######################################## [ 43s] libbz2-1.0.8-1.3 ######################################## [ 43s] liblzma-5.4.5-1.6 ######################################## [ 44s] libelf-0.189-1.6 ######################################## [ 44s] libxcrypt-4.4.36-1.6 ######################################## [ 44s] libdw-0.189-1.6 ######################################## [ 45s] libblkid-2.39.3-1.3 ######################################## [ 45s] nspr-4.35-1.3 ######################################## [ 45s] pam-1.1.6-1.3 ######################################## [ 45s] libcap-2.69-1.5 ######################################## [ 46s] gdbm-1.8.3-1.6 ######################################## [ 50s] perl-5.38.0-1.4 ######################################## [ 50s] libfreebl3-3.98-1.6 ######################################## [ 50s] liblua-5.1.5-1.3 ######################################## [ 51s] libopenssl3-3.0.13-1.6 ######################################## [ 51s] libpopt-1.16-1.3 ######################################## [ 52s] libpython3_121_0-3.12.0-1.5 ######################################## [ 52s] libsqlite-3.44.0-1.3 ######################################## [ 52s] libuuid-2.39.3-1.3 ######################################## [ 52s] libzstd1-1.5.5-1.3 ######################################## [ 53s] pkg-config-0.29.2-1.4 ######################################## [ 53s] libfdisk-2.39.3-1.3 ######################################## [ 53s] build-mkbaselibs-20120927-1.1 ######################################## [ 53s] nss-certs-3.98-1.6 ######################################## [ 53s] libsoftokn3-3.98-1.6 ######################################## [ 53s] nss-3.98-1.6 ######################################## [ 54s] libmount-2.39.3-1.3 ######################################## [ 54s] libasm-0.189-1.6 ######################################## [ 54s] libxml2-2.12.5-1.5 ######################################## [ 54s] xz-5.4.5-1.6 ######################################## [ 54s] bzip2-1.0.8-1.3 ######################################## [ 55s] linux-glibc-devel-6.6-1.5 ######################################## [ 55s] terminfo-base-full-6.4-1.6 ######################################## [ 55s] libncurses6-6.4-1.6 ######################################## [ 55s] libreadline-5.2-1.5 ######################################## [ 56s] gzip-1.3.12-1.3 ######################################## [ 56s] libcc1-14.1.0-1.6 ######################################## [ 56s] libhwasan-14.1.0-1.6 ######################################## [ 56s] libubsan-14.1.0-1.6 ######################################## [ 57s] libgfortran-14.1.0-1.6 ######################################## [ 57s] binutils-libs-2.42-1.6 ######################################## [ 57s] binutils-2.42-1.6 ######################################## [ 57s] make-4.4-1.3 ######################################## [ 58s] findutils-4.3.8-1.3 ######################################## [ 58s] libatomic-14.1.0-1.6 ######################################## [ 58s] libattr-2.5.1-1.3 ######################################## [ 58s] libacl-2.3.2-1.3 ######################################## [ 58s] tar-1.17-1.1 ######################################## [ 58s] libarchive-3.7.2-1.5 ######################################## [ 59s] libexpat-2.6.2-1.5 ######################################## [ 59s] libffi-3.4.2-1.5 ######################################## [ 61s] python3-base-3.12.0-1.5 ######################################## [ 61s] python3-3.12.0-1.1 ######################################## [ 61s] python3-setuptools-69.0.2-1.1 ######################################## [ 61s] libgomp-14.1.0-1.6 ######################################## [ 62s] libitm-14.1.0-1.6 ######################################## [ 66s] gcc-14.1.0-1.6 ######################################## [ 66s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 66s] glibc-devel-2.39-1.6 ######################################## [ 66s] libltdl-2.4.7-1.6 ######################################## [ 66s] libpcre-8.45-1.3 ######################################## [ 67s] libsmack-1.3.1-1.3 ######################################## [ 67s] libsmartcols-2.39.3-1.3 ######################################## [ 67s] m4-1.4.19-1.1 ######################################## [ 67s] autoconf-2.71-1.5 ######################################## [ 68s] automake-1.16.5-1.5 ######################################## [ 68s] patch-2.7.6-1.3 ######################################## [ 68s] sed-4.1c-1.3 ######################################## [ 70s] util-linux-2.39.3-1.3 ######################################## [ 70s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 70s] python3-trove_classifiers-2023.11.29-1######################################## [ 70s] python3-six-1.16.0-1.1 ######################################## [ 70s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 70s] python3-pyparsing-3.1.1-1.1 ######################################## [ 70s] python3-packaging-23.2-1.1 ######################################## [ 70s] python3-pluggy-1.3.0-1.1 ######################################## [ 70s] python3-pathspec-0.12.1-1.1 ######################################## [ 70s] python3-editables-0.5-1.1 ######################################## [ 70s] libmagic-data-5.45-1.3 ######################################## [ 70s] libmagic-5.45-1.3 ######################################## [ 71s] rpm-4.14.1.1-1.6 ######################################## [ 71s] rpm-build-4.14.1.1-1.6 ######################################## [ 71s] file-5.45-1.3 ######################################## [ 72s] python3-hatchling-1.21.0-1.1 ######################################## [ 72s] python3-build-1.0.3-1.1 ######################################## [ 73s] python3-pip-23.3.1-1.1 ######################################## [ 73s] util-linux-su-2.39.3-1.3 ######################################## [ 73s] libtool-2.4.7-1.6 ######################################## [ 73s] smack-1.3.1-1.3 ######################################## [ 73s] grep-2.5.2-1.3 ######################################## [ 99s] qemu-accel-x86_64-aarch64-0.4-1.2 ######################################## [ 100s] python3-devel-3.12.0-1.5 ######################################## [ 100s] build-20120927-1.1 ######################################## [ 100s] libncurses-6.4-1.6 ######################################## [ 100s] less-643-1.1 ######################################## [ 100s] elfutils-0.189-1.6 ######################################## [ 101s] glibc-locale-2.39-1.6 ######################################## [ 102s] tzdata-2023c-1.1 ######################################## [ 103s] libstdc++-devel-14.1.0-1.6 ######################################## [ 108s] cpp-14.1.0-1.6 ######################################## [ 114s] gcc-c++-14.1.0-1.6 ######################################## [ 114s] build-compare-2023.06.18-1.1 ######################################## [ 125s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 126s] gawk-3.1.5-1.1 ######################################## [ 126s] cpio-2.8-1.1 ######################################## [ 126s] diffutils-3.10-1.1 ######################################## [ 126s] hostname-3.23-1.1 ######################################## [ 126s] net-tools-2.0_20121208git-1.3 ######################################## [ 126s] update-alternatives-1.22.2-1.1 ######################################## [ 126s] which-2.17-1.1 ######################################## [ 129s] now finalizing build dir... [ 132s] ----------------------------------------------------------------- [ 132s] I have the following modifications for python3-pygments.spec: [ 132s] 4c4 [ 132s] < Release: 1 [ 132s] --- [ 132s] > Release: 1.1 [ 132s] build target is aarch64-tizen-linux [ 132s] ----------------------------------------------------------------- [ 132s] ----- building python3-pygments.spec (user abuild) [ 132s] ----------------------------------------------------------------- [ 132s] ----------------------------------------------------------------- [ 133s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/ace0224db7ca624500488da785307792-python3-pygments' /home/abuild/rpmbuild/SOURCES/python3-pygments.spec [ 133s] Building target platforms: aarch64-tizen-linux [ 133s] Building for target aarch64-tizen-linux [ 133s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.t9eMHy [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + rm -rf python3-pygments-2.17.2 [ 133s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-pygments-2.17.2.tar.gz [ 133s] + /bin/tar -xof - [ 134s] + STATUS=0 [ 134s] + '[' 0 -ne 0 ']' [ 134s] + cd python3-pygments-2.17.2 [ 134s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 135s] + echo 'Patch #0 (0001-Bump-to-2.17.2.patch):' [ 135s] Patch #0 (0001-Bump-to-2.17.2.patch): [ 135s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 135s] patching file .gitignore [ 135s] + cp /home/abuild/rpmbuild/SOURCES/python3-pygments.manifest . [ 135s] + exit 0 [ 135s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.N6lFlq [ 135s] + umask 022 [ 135s] + cd /home/abuild/rpmbuild/BUILD [ 135s] + cd python3-pygments-2.17.2 [ 135s] + ref=/usr/lib/rpm [ 135s] + mints=0 [ 135s] + case $(uname -m) in [ 135s] ++ uname -m [ 135s] + mints=20120610 [ 135s] + for s in guess sub [ 135s] ++ find -maxdepth 8 -name config.guess [ 135s] + for s in guess sub [ 135s] ++ find -maxdepth 8 -name config.sub [ 135s] + LANG=C [ 135s] + export LANG [ 135s] + unset DISPLAY [ 135s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 135s] + export CFLAGS [ 135s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 135s] + export CXXFLAGS [ 135s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 135s] + export FFLAGS [ 135s] + LDFLAGS= [ 135s] + export LDFLAGS [ 135s] + /usr/bin/python3 -m build -n [ 137s] * Getting build dependencies for sdist... [ 141s] * Building sdist... [ 200s] * Building wheel from sdist [ 200s] * Getting build dependencies for wheel... [ 202s] * Building wheel... [ 207s] Successfully built pygments-2.17.2.tar.gz and pygments-2.17.2-py3-none-any.whl [ 208s] + exit 0 [ 208s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.fnpG9l [ 208s] + umask 022 [ 208s] + cd /home/abuild/rpmbuild/BUILD [ 208s] + cd python3-pygments-2.17.2 [ 208s] + LANG=C [ 208s] + export LANG [ 208s] + unset DISPLAY [ 208s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 [ 208s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 [ 208s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 ./dist/pygments-2.17.2-py3-none-any.whl [ 217s] Processing ./dist/pygments-2.17.2-py3-none-any.whl [ 219s] Installing collected packages: pygments [ 237s] WARNING: The script pygmentize is installed in '/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64/usr/bin' which is not on PATH. [ 237s] Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. [ 237s] Successfully installed pygments-2.17.2 [ 239s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.17.2-1.1 --unique-debug-src-base python3-pygments-2.17.2-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2 [ 239s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debuginfo.manifest [ 240s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debugsource.manifest [ 240s] + /usr/lib/rpm/check-buildroot [ 240s] + /usr/lib/rpm//brp-compress [ 240s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 255s] + /usr/lib/rpm/brp-python-hardlink [ 343s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 [ 343s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/isu.list [ 343s] ~/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 343s] ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 343s] Processing files: python3-pygments-2.17.2-1.1.noarch [ 343s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 343s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 343s] [ 343s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Uoo80R [ 343s] + umask 022 [ 343s] + cd /home/abuild/rpmbuild/BUILD [ 343s] + cd python3-pygments-2.17.2 [ 343s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64/usr/share/licenses/python3-pygments [ 343s] + export LC_ALL=C [ 343s] + LC_ALL=C [ 343s] + export LICENSEDIR [ 343s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64/usr/share/licenses/python3-pygments [ 343s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64/usr/share/licenses/python3-pygments [ 343s] + exit 0 [ 395s] Provides: python3-pygments = 2.17.2-1.1 [ 395s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 395s] Requires: /usr/bin/python3 [ 395s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 [ 396s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-pygments-2.17.2-1.1.src.rpm [ 406s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-pygments-2.17.2-1.1.noarch.rpm [ 406s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.4QlCrk [ 406s] + umask 022 [ 406s] + cd /home/abuild/rpmbuild/BUILD [ 406s] + cd python3-pygments-2.17.2 [ 406s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.aarch64 [ 406s] + exit 0 [ 406s] ... checking for files with abuild user/group [ 407s] ... creating baselibs [ 409s] [ 409s] c064868841dc finished "build python3-pygments.spec" at Sat May 25 11:23:53 UTC 2024. [ 409s]