[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] c064868841dc started "build python3-pygments.spec" at Sat May 25 10:20:42 UTC 2024. [ 1s] [ 1s] Building python3-pygments for project 'Tizen-Base-Toolchain' repository 'standard' arch 'armv7l' srcmd5 'ace0224db7ca624500488da785307792' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/python3-pygments.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/python3-pygments.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/16/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.16/.build-srcdir/python3-pygments.spec build ... [ 2s] registering binfmt handlers for cross build [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] [1/42] preinstalling libmagic-data... [ 5s] [2/42] preinstalling libncurses... [ 5s] [3/42] preinstalling setup... [ 5s] [4/42] preinstalling filesystem... [ 6s] [5/42] preinstalling glibc... [ 6s] [6/42] preinstalling libgcc... [ 6s] [7/42] preinstalling bash... [ 7s] [8/42] preinstalling diffutils... [ 7s] [9/42] preinstalling grep... [ 7s] [10/42] preinstalling libattr... [ 7s] [11/42] preinstalling libblkid... [ 7s] [12/42] preinstalling libbz2... [ 7s] [13/42] preinstalling libcap... [ 7s] [14/42] preinstalling libfreebl3... [ 8s] [15/42] preinstalling liblua... [ 8s] [16/42] preinstalling liblzma... [ 8s] [17/42] preinstalling libpopt... [ 8s] [18/42] preinstalling libreadline... [ 8s] [19/42] preinstalling libsmack... [ 9s] [20/42] preinstalling libsqlite... [ 9s] [21/42] preinstalling libuuid... [ 9s] [22/42] preinstalling libxcrypt... [ 9s] [23/42] preinstalling libzstd1... [ 10s] [24/42] preinstalling nspr... [ 10s] [25/42] preinstalling sed... [ 10s] [26/42] preinstalling zlib... [ 10s] [27/42] preinstalling qemu-accel-x86_64-armv7l... [ 36s] [28/42] preinstalling qemu-linux-user-x86_64-cross... [ 41s] [29/42] preinstalling coreutils... [ 42s] [30/42] preinstalling libacl... [ 42s] [31/42] preinstalling libelf... [ 42s] [32/42] preinstalling libmount... [ 42s] [33/42] preinstalling smack... [ 42s] [34/42] preinstalling bzip2... [ 42s] [35/42] preinstalling libmagic... [ 43s] [36/42] preinstalling libxml2... [ 43s] [37/42] preinstalling tar... [ 43s] [38/42] preinstalling util-linux... [ 44s] [39/42] preinstalling util-linux-su... [ 44s] [40/42] preinstalling nss... [ 44s] [41/42] preinstalling libsoftokn3... [ 44s] [42/42] preinstalling rpm... [ 45s] running qemu-linux-user-x86_64-cross postinstall script [ 46s] running qemu-accel-x86_64-armv7l postinstall script [ 46s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.1.0/liblto_plugin.so': No such file or directory [ 46s] running setup postinstall script [ 46s] chroot: failed to run command '': No such file or directory [ 46s] initializing rpm db... [ 46s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 46s] breaking dependency libxcrypt-devel -> glibc-devel [ 46s] cycle: libsoftokn3 -> nss [ 46s] breaking dependency nss -> libsoftokn3 [ 46s] done [ 46s] querying package ids... [ 48s] [1/116] cumulate libmagic-data-5.45-1.3 [ 48s] [2/116] cumulate python3-editables-0.5-1.1 [ 48s] [3/116] cumulate python3-pathspec-0.12.1-1.1 [ 48s] [4/116] cumulate python3-pluggy-1.3.0-1.1 [ 48s] [5/116] cumulate python3-pyparsing-3.1.1-1.1 [ 48s] [6/116] cumulate python3-pyproject_hooks-1.0.0-1.1 [ 48s] [7/116] cumulate python3-six-1.16.0-1.1 [ 48s] [8/116] cumulate python3-trove_classifiers-2023.11.29-1.1 [ 48s] [9/116] cumulate python3-typing_extensions-4.9.0-1.1 [ 48s] [10/116] cumulate setup-0.9-1.1 [ 48s] [11/116] cumulate filesystem-3.1-1.1 [ 48s] [12/116] cumulate python3-packaging-23.2-1.1 [ 48s] [13/116] cumulate glibc-2.39-1.6 [ 48s] [14/116] cumulate libatomic-14.1.0-1.6 [ 48s] [15/116] cumulate libgcc-14.1.0-1.6 [ 48s] [16/116] cumulate bash-3.2.57-1.1 [ 48s] [17/116] cumulate cpio-2.8-1.1 [ 48s] [18/116] cumulate diffutils-3.10-1.1 [ 48s] [19/116] cumulate findutils-4.3.8-1.3 [ 48s] [20/116] cumulate gdbm-1.8.3-1.6 [ 48s] [21/116] cumulate hostname-3.23-1.1 [ 48s] [22/116] cumulate libattr-2.5.1-1.3 [ 48s] [23/116] cumulate libblkid-2.39.3-1.3 [ 48s] [24/116] cumulate libbz2-1.0.8-1.4 [ 48s] [25/116] cumulate libcap-2.69-1.5 [ 48s] [26/116] cumulate libexpat-2.6.2-1.5 [ 48s] [27/116] cumulate libffi-3.4.2-1.5 [ 48s] [28/116] cumulate libfreebl3-3.98-1.5 [ 48s] [29/116] cumulate libgfortran-14.1.0-1.6 [ 48s] [30/116] cumulate libgomp-14.1.0-1.6 [ 48s] [31/116] cumulate libitm-14.1.0-1.6 [ 48s] [32/116] cumulate libltdl-2.4.7-1.6 [ 48s] [33/116] cumulate liblua-5.1.5-1.3 [ 48s] [34/116] cumulate liblzma-5.4.5-1.6 [ 48s] [35/116] cumulate libopenssl3-3.0.13-1.6 [ 48s] [36/116] cumulate libpcre-8.45-1.3 [ 48s] [37/116] cumulate libpopt-1.16-1.3 [ 48s] [38/116] cumulate libpython3_121_0-3.12.0-1.5 [ 48s] [39/116] cumulate libsmack-1.3.1-1.3 [ 48s] [40/116] cumulate libsmartcols-2.39.3-1.3 [ 48s] [41/116] cumulate libsqlite-3.44.0-1.3 [ 48s] [42/116] cumulate libstdc++-14.1.0-1.6 [ 48s] [43/116] cumulate libuuid-2.39.3-1.3 [ 48s] [44/116] cumulate libxcrypt-4.4.36-1.6 [ 48s] [45/116] cumulate libzstd1-1.5.5-1.3 [ 48s] [46/116] cumulate m4-1.4.19-1.1 [ 48s] [47/116] cumulate net-tools-2.0_20121208git-1.3 [ 48s] [48/116] cumulate nspr-4.35-1.3 [ 48s] [49/116] cumulate patch-2.7.6-1.3 [ 48s] [50/116] cumulate pkg-config-0.29.2-1.4 [ 48s] [51/116] cumulate sed-4.1c-1.3 [ 48s] [52/116] cumulate update-alternatives-1.22.2-1.1 [ 48s] [53/116] cumulate which-2.17-1.1 [ 48s] [54/116] cumulate zlib-1.3-1.4 [ 48s] [55/116] cumulate build-compare-2023.06.18-1.1 [ 48s] [56/116] cumulate libstdc++-devel-14.1.0-1.6 [ 48s] [57/116] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.2 [ 48s] [58/116] cumulate cpp-14.1.0-1.6 [ 48s] [59/116] cumulate gcc-c++-14.1.0-1.6 [ 48s] [60/116] cumulate binutils-libs-2.42-1.6 [ 48s] [61/116] cumulate coreutils-6.9-14.1 [ 48s] [62/116] cumulate gawk-3.1.5-1.1 [ 48s] [63/116] cumulate grep-2.5.2-1.3 [ 48s] [64/116] cumulate libacl-2.3.2-1.3 [ 48s] [65/116] cumulate libcc1-14.1.0-1.6 [ 48s] [66/116] cumulate libelf-0.189-1.6 [ 48s] [67/116] cumulate libmount-2.39.3-1.3 [ 48s] [68/116] cumulate libubsan-14.1.0-1.6 [ 48s] [69/116] cumulate make-4.4-1.3 [ 48s] [70/116] cumulate nss-certs-3.98-1.5 [ 48s] [71/116] cumulate smack-1.3.1-1.3 [ 48s] [72/116] cumulate bzip2-1.0.8-1.4 [ 48s] [73/116] cumulate libfdisk-2.39.3-1.3 [ 48s] [74/116] cumulate libmagic-5.45-1.3 [ 48s] [75/116] cumulate libxml2-2.12.5-1.5 [ 48s] [76/116] cumulate xz-5.4.5-1.6 [ 48s] [77/116] cumulate perl-5.38.0-1.4 [ 48s] [78/116] cumulate build-mkbaselibs-20120927-1.1 [ 48s] [79/116] cumulate linux-glibc-devel-6.6-1.5 [ 48s] [80/116] cumulate terminfo-base-full-6.4-1.6 [ 48s] [81/116] cumulate autoconf-2.71-1.5 [ 48s] [82/116] cumulate file-5.45-1.3 [ 48s] [83/116] cumulate glibc-locale-2.39-1.6 [ 48s] [84/116] cumulate tar-1.17-1.1 [ 48s] [85/116] cumulate binutils-2.42-1.6 [ 48s] [86/116] cumulate gzip-1.3.12-1.3 [ 48s] [87/116] cumulate pam-1.1.6-1.3 [ 48s] [88/116] cumulate tzdata-2023c-1.1 [ 48s] [89/116] cumulate libdw-0.189-1.6 [ 48s] [90/116] cumulate libarchive-3.7.2-1.5 [ 48s] [91/116] cumulate gcc-14.1.0-1.6 [ 48s] [92/116] cumulate qemu-accel-x86_64-armv7l-0.4-1.2 [ 48s] [93/116] cumulate automake-1.16.5-1.5 [ 48s] [94/116] cumulate libasm-0.189-1.6 [ 48s] [95/116] cumulate libncurses6-6.4-1.6 [ 48s] [96/116] cumulate build-20120927-1.1 [ 48s] [97/116] cumulate libncurses-6.4-1.6 [ 48s] [98/116] cumulate less-643-1.1 [ 48s] [99/116] cumulate libreadline-5.2-1.4 [ 48s] [100/116] cumulate libtool-2.4.7-1.6 [ 48s] [101/116] cumulate elfutils-0.189-1.6 [ 48s] [102/116] cumulate python3-base-3.12.0-1.5 [ 48s] [103/116] cumulate util-linux-2.39.3-1.3 [ 48s] [104/116] cumulate python3-3.12.0-1.1 [ 48s] [105/116] cumulate python3-build-1.0.3-1.1 [ 48s] [106/116] cumulate util-linux-su-2.39.3-1.3 [ 48s] [107/116] cumulate python3-devel-3.12.0-1.5 [ 48s] [108/116] cumulate python3-hatchling-1.21.0-1.1 [ 48s] [109/116] cumulate python3-setuptools-69.0.2-1.1 [ 48s] [110/116] cumulate python3-pip-23.3.1-1.1 [ 48s] [111/116] cumulate libxcrypt-devel-4.4.36-1.6 [ 48s] [112/116] cumulate nss-3.98-1.5 [ 48s] [113/116] cumulate glibc-devel-2.39-1.6 [ 48s] [114/116] cumulate libsoftokn3-3.98-1.5 [ 48s] [115/116] cumulate rpm-4.14.1.1-1.5 [ 48s] [116/116] cumulate rpm-build-4.14.1.1-1.5 [ 48s] now installing cumulated packages [ 52s] Preparing... ######################################## [ 52s] Updating / installing... [ 52s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 52s] ########################## [ 52s] filesystem-3.1-1.1 ######################################## [ 52s] python3-typing_extensions-4.9.0-1.1 ######################################## [ 52s] python3-trove_classifiers-2023.11.29-1######################################## [ 52s] python3-six-1.16.0-1.1 ######################################## [ 52s] python3-pyproject_hooks-1.0.0-1.1 ######################################## [ 52s] python3-pyparsing-3.1.1-1.1 ######################################## [ 52s] python3-packaging-23.2-1.1 ######################################## [ 52s] python3-pluggy-1.3.0-1.1 ######################################## [ 52s] python3-pathspec-0.12.1-1.1 ######################################## [ 52s] python3-editables-0.5-1.1 ######################################## [ 52s] libmagic-data-5.45-1.3 ######################################## [ 53s] glibc-2.39-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 53s] ######################################## [ 54s] libgcc-14.1.0-1.6 ######################################## [ 55s] bash-3.2.57-1.1 ######################################## [ 56s] zlib-1.3-1.4 ######################################## [ 57s] coreutils-6.9-14.1 ######################################## [ 57s] libbz2-1.0.8-1.4 ######################################## [ 57s] liblzma-5.4.5-1.6 ######################################## [ 58s] libstdc++-14.1.0-1.6 ######################################## [ 58s] libelf-0.189-1.6 ######################################## [ 59s] libxcrypt-4.4.36-1.6 ######################################## [ 59s] libdw-0.189-1.6 ######################################## [ 59s] libmagic-5.45-1.3 ######################################## [ 59s] libblkid-2.39.3-1.3 ######################################## [ 60s] nspr-4.35-1.3 ######################################## [ 60s] pam-1.1.6-1.3 ######################################## [ 61s] gdbm-1.8.3-1.6 ######################################## [ 65s] perl-5.38.0-1.4 ######################################## [ 65s] libcap-2.69-1.5 ######################################## [ 65s] libfreebl3-3.98-1.5 ######################################## [ 65s] liblua-5.1.5-1.3 ######################################## [ 66s] libopenssl3-3.0.13-1.6 ######################################## [ 66s] libpopt-1.16-1.3 ######################################## [ 66s] libpython3_121_0-3.12.0-1.5 ######################################## [ 67s] libsqlite-3.44.0-1.3 ######################################## [ 67s] libuuid-2.39.3-1.3 ######################################## [ 68s] libzstd1-1.5.5-1.3 ######################################## [ 68s] pkg-config-0.29.2-1.4 ######################################## [ 68s] build-mkbaselibs-20120927-1.1 ######################################## [ 68s] linux-glibc-devel-6.6-1.5 ######################################## [ 68s] terminfo-base-full-6.4-1.6 ######################################## [ 69s] libncurses6-6.4-1.6 ######################################## [ 69s] libreadline-5.2-1.4 ######################################## [ 69s] libfdisk-2.39.3-1.3 ######################################## [ 70s] nss-certs-3.98-1.5 ######################################## [ 70s] libsoftokn3-3.98-1.5 ######################################## [ 70s] nss-3.98-1.5 ######################################## [ 70s] libmount-2.39.3-1.3 ######################################## [ 71s] libasm-0.189-1.6 ######################################## [ 71s] libcc1-14.1.0-1.6 ######################################## [ 71s] libubsan-14.1.0-1.6 ######################################## [ 72s] libxml2-2.12.5-1.5 ######################################## [ 72s] xz-5.4.5-1.6 ######################################## [ 72s] bzip2-1.0.8-1.4 ######################################## [ 72s] gzip-1.3.12-1.3 ######################################## [ 72s] binutils-libs-2.42-1.6 ######################################## [ 73s] binutils-2.42-1.6 ######################################## [ 73s] make-4.4-1.3 ######################################## [ 73s] findutils-4.3.8-1.3 ######################################## [ 73s] libattr-2.5.1-1.3 ######################################## [ 73s] libacl-2.3.2-1.3 ######################################## [ 74s] tar-1.17-1.1 ######################################## [ 74s] libarchive-3.7.2-1.5 ######################################## [ 74s] rpm-4.14.1.1-1.5 ######################################## [ 75s] libexpat-2.6.2-1.5 ######################################## [ 75s] libffi-3.4.2-1.5 ######################################## [ 77s] python3-base-3.12.0-1.5 ######################################## [ 77s] python3-3.12.0-1.1 ######################################## [ 77s] python3-setuptools-69.0.2-1.1 ######################################## [ 77s] libgfortran-14.1.0-1.6 ######################################## [ 78s] libgomp-14.1.0-1.6 ######################################## [ 78s] libitm-14.1.0-1.6 ######################################## [ 78s] libltdl-2.4.7-1.6 ######################################## [ 78s] libpcre-8.45-1.3 ######################################## [ 79s] libsmack-1.3.1-1.3 ######################################## [ 79s] libsmartcols-2.39.3-1.3 ######################################## [ 79s] m4-1.4.19-1.1 ######################################## [ 79s] autoconf-2.71-1.5 ######################################## [ 80s] automake-1.16.5-1.5 ######################################## [ 80s] patch-2.7.6-1.3 ######################################## [ 80s] sed-4.1c-1.3 ######################################## [ 80s] util-linux-2.39.3-1.3 ######################################## [ 80s] libatomic-14.1.0-1.6 ######################################## [ 81s] libtool-2.4.7-1.6 ######################################## [ 81s] python3-pip-23.3.1-1.1 ######################################## [ 82s] python3-build-1.0.3-1.1 ######################################## [ 82s] python3-hatchling-1.21.0-1.1 ######################################## [ 82s] build-20120927-1.1 ######################################## [ 82s] libncurses-6.4-1.6 ######################################## [ 83s] libstdc++-devel-14.1.0-1.6 ######################################## [ 83s] build-compare-2023.06.18-1.1 ######################################## [ 94s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 99s] gcc-14.1.0-1.6 ######################################## [ 99s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 99s] glibc-devel-2.39-1.6 ######################################## [ 117s] qemu-accel-x86_64-armv7l-0.4-1.2 ######################################## [ 117s] rpm-build-4.14.1.1-1.5 ######################################## [ 117s] util-linux-su-2.39.3-1.3 ######################################## [ 117s] smack-1.3.1-1.3 ######################################## [ 117s] grep-2.5.2-1.3 ######################################## [ 118s] python3-devel-3.12.0-1.5 ######################################## [ 118s] elfutils-0.189-1.6 ######################################## [ 118s] less-643-1.1 ######################################## [ 118s] file-5.45-1.3 ######################################## [ 118s] glibc-locale-2.39-1.6 ######################################## [ 118s] tzdata-2023c-1.1 ######################################## [ 120s] cpp-14.1.0-1.6 ######################################## [ 122s] gcc-c++-14.1.0-1.6 ######################################## [ 122s] gawk-3.1.5-1.1 ######################################## [ 122s] cpio-2.8-1.1 ######################################## [ 122s] diffutils-3.10-1.1 ######################################## [ 122s] hostname-3.23-1.1 ######################################## [ 122s] net-tools-2.0_20121208git-1.3 ######################################## [ 122s] update-alternatives-1.22.2-1.1 ######################################## [ 122s] which-2.17-1.1 ######################################## [ 124s] now finalizing build dir... [ 127s] ----------------------------------------------------------------- [ 127s] I have the following modifications for python3-pygments.spec: [ 127s] 4c4 [ 127s] < Release: 1 [ 127s] --- [ 127s] > Release: 1.1 [ 128s] build target is armv7l-tizen-linux [ 128s] ----------------------------------------------------------------- [ 128s] ----- building python3-pygments.spec (user abuild) [ 128s] ----------------------------------------------------------------- [ 128s] ----------------------------------------------------------------- [ 128s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/ace0224db7ca624500488da785307792-python3-pygments' /home/abuild/rpmbuild/SOURCES/python3-pygments.spec [ 128s] Building target platforms: armv7l-tizen-linux [ 128s] Building for target armv7l-tizen-linux [ 128s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CjwXh5 [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + rm -rf python3-pygments-2.17.2 [ 128s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/python3-pygments-2.17.2.tar.gz [ 128s] + /bin/tar -xof - [ 129s] + STATUS=0 [ 129s] + '[' 0 -ne 0 ']' [ 129s] + cd python3-pygments-2.17.2 [ 129s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 129s] + echo 'Patch #0 (0001-Bump-to-2.17.2.patch):' [ 129s] Patch #0 (0001-Bump-to-2.17.2.patch): [ 129s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 129s] patching file .gitignore [ 129s] + cp /home/abuild/rpmbuild/SOURCES/python3-pygments.manifest . [ 129s] + exit 0 [ 129s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.drFdw0 [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd python3-pygments-2.17.2 [ 129s] + ref=/usr/lib/rpm [ 129s] + mints=0 [ 129s] + case $(uname -m) in [ 129s] ++ uname -m [ 129s] + for s in guess sub [ 129s] ++ find -maxdepth 8 -name config.guess [ 129s] + for s in guess sub [ 129s] ++ find -maxdepth 8 -name config.sub [ 129s] + LANG=C [ 129s] + export LANG [ 129s] + unset DISPLAY [ 129s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 129s] + export CFLAGS [ 129s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 129s] + export CXXFLAGS [ 129s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 129s] + export FFLAGS [ 129s] + LDFLAGS= [ 129s] + export LDFLAGS [ 129s] + /usr/bin/python3 -m build -n [ 132s] * Getting build dependencies for sdist... [ 136s] * Building sdist... [ 209s] * Building wheel from sdist [ 209s] * Getting build dependencies for wheel... [ 211s] * Building wheel... [ 216s] Successfully built pygments-2.17.2.tar.gz and pygments-2.17.2-py3-none-any.whl [ 217s] + exit 0 [ 217s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.TA947S [ 217s] + umask 022 [ 217s] + cd /home/abuild/rpmbuild/BUILD [ 217s] + cd python3-pygments-2.17.2 [ 217s] + LANG=C [ 217s] + export LANG [ 217s] + unset DISPLAY [ 217s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 217s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 217s] + /usr/bin/python3 -m pip install --root /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ./dist/pygments-2.17.2-py3-none-any.whl [ 224s] Processing ./dist/pygments-2.17.2-py3-none-any.whl [ 227s] Installing collected packages: pygments [ 243s] WARNING: The script pygmentize is installed in '/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/bin' which is not on PATH. [ 243s] Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. [ 243s] Successfully installed pygments-2.17.2 [ 244s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.17.2-1.1 --unique-debug-src-base python3-pygments-2.17.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2 [ 245s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debuginfo.manifest [ 245s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/python3-pygments-debugsource.manifest [ 245s] + /usr/lib/rpm/check-buildroot [ 245s] + /usr/lib/rpm//brp-compress [ 245s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 258s] + /usr/lib/rpm/brp-python-hardlink [ 337s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 337s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/python3-pygments-2.17.2/isu.list [ 337s] ~/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 337s] ~/rpmbuild/BUILD/python3-pygments-2.17.2 [ 337s] Processing files: python3-pygments-2.17.2-1.1.noarch [ 337s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 337s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 337s] [ 337s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.W90cBf [ 337s] + umask 022 [ 337s] + cd /home/abuild/rpmbuild/BUILD [ 337s] + cd python3-pygments-2.17.2 [ 337s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 337s] + export LC_ALL=C [ 337s] + LC_ALL=C [ 337s] + export LICENSEDIR [ 337s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 337s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm/usr/share/licenses/python3-pygments [ 337s] + exit 0 [ 381s] Provides: python3-pygments = 2.17.2-1.1 [ 381s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 381s] Requires: /usr/bin/python3 [ 381s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 382s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-pygments-2.17.2-1.1.src.rpm [ 388s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-pygments-2.17.2-1.1.noarch.rpm [ 388s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.kj3cnt [ 388s] + umask 022 [ 388s] + cd /home/abuild/rpmbuild/BUILD [ 388s] + cd python3-pygments-2.17.2 [ 388s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-pygments-2.17.2-1.1.arm [ 388s] + exit 0 [ 388s] ... checking for files with abuild user/group [ 388s] ... creating baselibs [ 390s] [ 390s] c064868841dc finished "build python3-pygments.spec" at Sat May 25 10:27:11 UTC 2024. [ 390s]