[ 0s] Memory limit set to 71855024KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] c064868841dc started "build libpciaccess.spec" at Sat May 25 07:33:02 UTC 2024. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-Base-Toolchain' repository 'standard' arch 'i586' srcmd5 '7325d11798514e0e18cf29ffc56035ff' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/libpciaccess.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/libpciaccess.spec build ... [ 14s] cycle: nss -> libsoftokn3 [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] [1/37] preinstalling libmagic-data... [ 15s] [2/37] preinstalling libncurses... [ 15s] [3/37] preinstalling setup... [ 15s] [4/37] preinstalling filesystem... [ 15s] [5/37] preinstalling glibc... [ 16s] [6/37] preinstalling bash... [ 16s] [7/37] preinstalling diffutils... [ 16s] [8/37] preinstalling grep... [ 16s] [9/37] preinstalling libattr... [ 16s] [10/37] preinstalling libbz2... [ 16s] [11/37] preinstalling libfreebl3... [ 16s] [12/37] preinstalling libgcc... [ 17s] [13/37] preinstalling liblua... [ 17s] [14/37] preinstalling liblzma... [ 17s] [15/37] preinstalling libpopt... [ 18s] [16/37] preinstalling libreadline... [ 18s] [17/37] preinstalling libsmack... [ 18s] [18/37] preinstalling libsqlite... [ 18s] [19/37] preinstalling libxcrypt... [ 18s] [20/37] preinstalling libzstd1... [ 18s] [21/37] preinstalling nspr... [ 18s] [22/37] preinstalling sed... [ 19s] [23/37] preinstalling zlib... [ 19s] [24/37] preinstalling coreutils... [ 19s] [25/37] preinstalling libacl... [ 19s] [26/37] preinstalling libcap... [ 19s] [27/37] preinstalling libelf... [ 19s] [28/37] preinstalling smack... [ 19s] [29/37] preinstalling bzip2... [ 19s] [30/37] preinstalling libmagic... [ 20s] [31/37] preinstalling libxml2... [ 20s] [32/37] preinstalling util-linux... [ 20s] [33/37] preinstalling tar... [ 20s] [34/37] preinstalling util-linux-su... [ 20s] [35/37] preinstalling nss... [ 21s] [36/37] preinstalling libsoftokn3... [ 21s] [37/37] preinstalling rpm... [ 21s] running setup postinstall script [ 21s] chroot: failed to run command '': No such file or directory [ 21s] initializing rpm db... [ 22s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 22s] breaking dependency libxcrypt-devel -> glibc-devel [ 22s] cycle: libsoftokn3 -> nss [ 22s] breaking dependency nss -> libsoftokn3 [ 22s] done [ 22s] querying package ids... [ 23s] [1/98] cumulate libmagic-data-5.45-1.4 [ 23s] [2/98] cumulate setup-0.9-1.2 [ 23s] [3/98] cumulate filesystem-3.1-1.1 [ 23s] [4/98] cumulate glibc-2.39-1.6 [ 23s] [5/98] cumulate bash-3.2.57-1.1 [ 23s] [6/98] cumulate cpio-2.8-1.1 [ 23s] [7/98] cumulate diffutils-3.10-1.1 [ 23s] [8/98] cumulate findutils-4.3.8-1.4 [ 23s] [9/98] cumulate gdbm-1.8.3-1.7 [ 23s] [10/98] cumulate hostname-3.23-1.1 [ 23s] [11/98] cumulate libatomic-14.1.0-1.6 [ 23s] [12/98] cumulate libattr-2.5.1-1.4 [ 23s] [13/98] cumulate libblkid-2.39.3-1.3 [ 23s] [14/98] cumulate libbz2-1.0.8-1.4 [ 23s] [15/98] cumulate libfreebl3-3.98-1.7 [ 23s] [16/98] cumulate libgcc-14.1.0-1.6 [ 23s] [17/98] cumulate libgomp-14.1.0-1.6 [ 23s] [18/98] cumulate libitm-14.1.0-1.6 [ 23s] [19/98] cumulate libltdl-2.4.7-1.6 [ 23s] [20/98] cumulate liblua-5.1.5-1.3 [ 23s] [21/98] cumulate liblzma-5.4.5-1.7 [ 23s] [22/98] cumulate libopenssl3-3.0.13-1.7 [ 23s] [23/98] cumulate libpcre-8.45-1.4 [ 23s] [24/98] cumulate libpopt-1.16-1.4 [ 23s] [25/98] cumulate libquadmath-14.1.0-1.6 [ 23s] [26/98] cumulate libsmack-1.3.1-1.4 [ 23s] [27/98] cumulate libsmartcols-2.39.3-1.3 [ 23s] [28/98] cumulate libsqlite-3.44.0-1.4 [ 23s] [29/98] cumulate libuuid-2.39.3-1.3 [ 23s] [30/98] cumulate libxcrypt-4.4.36-1.7 [ 23s] [31/98] cumulate libzstd1-1.5.5-1.4 [ 23s] [32/98] cumulate m4-1.4.19-1.1 [ 23s] [33/98] cumulate net-tools-2.0_20121208git-1.4 [ 23s] [34/98] cumulate nspr-4.35-1.4 [ 23s] [35/98] cumulate patch-2.7.6-1.4 [ 23s] [36/98] cumulate pkg-config-0.29.2-1.4 [ 23s] [37/98] cumulate sed-4.1c-1.4 [ 23s] [38/98] cumulate update-alternatives-1.22.2-1.1 [ 23s] [39/98] cumulate which-2.17-1.1 [ 23s] [40/98] cumulate zlib-1.3-1.5 [ 23s] [41/98] cumulate build-compare-2023.06.18-1.2 [ 23s] [42/98] cumulate util-macros-1.19.0-1.1 [ 23s] [43/98] cumulate binutils-libs-2.42-1.6 [ 23s] [44/98] cumulate coreutils-6.9-14.2 [ 23s] [45/98] cumulate cpp-14.1.0-1.6 [ 23s] [46/98] cumulate gawk-3.1.5-1.1 [ 23s] [47/98] cumulate gcc-c++-14.1.0-1.6 [ 23s] [48/98] cumulate grep-2.5.2-1.3 [ 23s] [49/98] cumulate libacl-2.3.2-1.4 [ 23s] [50/98] cumulate libcap-2.69-1.5 [ 23s] [51/98] cumulate libelf-0.189-1.6 [ 23s] [52/98] cumulate libgfortran-14.1.0-1.6 [ 23s] [53/98] cumulate libmount-2.39.3-1.3 [ 23s] [54/98] cumulate libstdc++-14.1.0-1.6 [ 23s] [55/98] cumulate make-4.4-1.3 [ 23s] [56/98] cumulate nss-certs-3.98-1.7 [ 23s] [57/98] cumulate smack-1.3.1-1.4 [ 23s] [58/98] cumulate bzip2-1.0.8-1.4 [ 23s] [59/98] cumulate libfdisk-2.39.3-1.3 [ 23s] [60/98] cumulate libmagic-5.45-1.4 [ 23s] [61/98] cumulate libxml2-2.12.5-1.6 [ 23s] [62/98] cumulate xz-5.4.5-1.7 [ 23s] [63/98] cumulate perl-5.38.0-1.4 [ 23s] [64/98] cumulate build-mkbaselibs-20120927-1.1 [ 23s] [65/98] cumulate libstdc++-devel-14.1.0-1.6 [ 23s] [66/98] cumulate linux-glibc-devel-6.6-1.7 [ 23s] [67/98] cumulate file-5.45-1.4 [ 23s] [68/98] cumulate tar-1.17-1.1 [ 23s] [69/98] cumulate terminfo-base-full-6.4-1.7 [ 23s] [70/98] cumulate autoconf-2.71-1.7 [ 23s] [71/98] cumulate glibc-locale-2.39-1.6 [ 23s] [72/98] cumulate gzip-1.3.12-1.4 [ 23s] [73/98] cumulate libcc1-14.1.0-1.6 [ 23s] [74/98] cumulate libubsan-14.1.0-1.6 [ 23s] [75/98] cumulate binutils-2.42-1.6 [ 23s] [76/98] cumulate pam-1.1.6-1.5 [ 23s] [77/98] cumulate tzdata-2023c-1.1 [ 23s] [78/98] cumulate libdw-0.189-1.6 [ 23s] [79/98] cumulate libarchive-3.7.2-1.5 [ 23s] [80/98] cumulate automake-1.16.5-1.5 [ 23s] [81/98] cumulate libasm-0.189-1.6 [ 23s] [82/98] cumulate libncurses6-6.4-1.7 [ 23s] [83/98] cumulate build-20120927-1.1 [ 23s] [84/98] cumulate gcc-14.1.0-1.6 [ 23s] [85/98] cumulate libncurses-6.4-1.7 [ 23s] [86/98] cumulate less-643-1.1 [ 23s] [87/98] cumulate libreadline-5.2-1.5 [ 23s] [88/98] cumulate libtool-2.4.7-1.6 [ 23s] [89/98] cumulate elfutils-0.189-1.6 [ 23s] [90/98] cumulate util-linux-2.39.3-1.3 [ 23s] [91/98] cumulate util-linux-su-2.39.3-1.3 [ 23s] [92/98] cumulate libxcrypt-devel-4.4.36-1.7 [ 23s] [93/98] cumulate nss-3.98-1.7 [ 23s] [94/98] cumulate glibc-devel-2.39-1.6 [ 23s] [95/98] cumulate libsoftokn3-3.98-1.7 [ 23s] [96/98] cumulate rpm-4.14.1.1-1.6 [ 23s] [97/98] cumulate zlib-devel-1.3-1.5 [ 23s] [98/98] cumulate rpm-build-4.14.1.1-1.6 [ 23s] now installing cumulated packages [ 24s] Preparing... ######################################## [ 24s] Updating / installing... [ 24s] setup-0.9-1.2 ######################################## [ 24s] filesystem-3.1-1.1 ######################################## [ 24s] libmagic-data-5.45-1.4 ######################################## [ 25s] glibc-2.39-1.6 ######################################## [ 25s] bash-3.2.57-1.1 ######################################## [ 25s] zlib-1.3-1.5 ######################################## [ 26s] libgcc-14.1.0-1.6 ######################################## [ 26s] libstdc++-14.1.0-1.6 ######################################## [ 26s] coreutils-6.9-14.2 ######################################## [ 26s] libbz2-1.0.8-1.4 ######################################## [ 26s] liblzma-5.4.5-1.7 ######################################## [ 27s] libelf-0.189-1.6 ######################################## [ 27s] libdw-0.189-1.6 ######################################## [ 27s] libxcrypt-4.4.36-1.7 ######################################## [ 27s] libmagic-5.45-1.4 ######################################## [ 27s] libblkid-2.39.3-1.3 ######################################## [ 28s] nspr-4.35-1.4 ######################################## [ 28s] pkg-config-0.29.2-1.4 ######################################## [ 28s] pam-1.1.6-1.5 ######################################## [ 28s] libcap-2.69-1.5 ######################################## [ 28s] libfreebl3-3.98-1.7 ######################################## [ 28s] liblua-5.1.5-1.3 ######################################## [ 29s] libpopt-1.16-1.4 ######################################## [ 29s] libuuid-2.39.3-1.3 ######################################## [ 29s] libzstd1-1.5.5-1.4 ######################################## [ 30s] linux-glibc-devel-6.6-1.7 ######################################## [ 30s] terminfo-base-full-6.4-1.7 ######################################## [ 30s] libncurses6-6.4-1.7 ######################################## [ 30s] libreadline-5.2-1.5 ######################################## [ 30s] libfdisk-2.39.3-1.3 ######################################## [ 30s] nss-certs-3.98-1.7 ######################################## [ 30s] libmount-2.39.3-1.3 ######################################## [ 31s] libasm-0.189-1.6 ######################################## [ 31s] libxml2-2.12.5-1.6 ######################################## [ 31s] xz-5.4.5-1.7 ######################################## [ 31s] bzip2-1.0.8-1.4 ######################################## [ 31s] gzip-1.3.12-1.4 ######################################## [ 31s] libcc1-14.1.0-1.6 ######################################## [ 31s] libubsan-14.1.0-1.6 ######################################## [ 32s] libgfortran-14.1.0-1.6 ######################################## [ 32s] binutils-libs-2.42-1.6 ######################################## [ 33s] binutils-2.42-1.6 ######################################## [ 33s] make-4.4-1.3 ######################################## [ 33s] findutils-4.3.8-1.4 ######################################## [ 33s] gdbm-1.8.3-1.7 ######################################## [ 39s] perl-5.38.0-1.4 ######################################## [ 39s] build-mkbaselibs-20120927-1.1 ######################################## [ 39s] libatomic-14.1.0-1.6 ######################################## [ 39s] libattr-2.5.1-1.4 ######################################## [ 40s] libacl-2.3.2-1.4 ######################################## [ 40s] tar-1.17-1.1 ######################################## [ 40s] libgomp-14.1.0-1.6 ######################################## [ 40s] libitm-14.1.0-1.6 ######################################## [ 41s] libltdl-2.4.7-1.6 ######################################## [ 41s] libopenssl3-3.0.13-1.7 ######################################## [ 42s] libarchive-3.7.2-1.5 ######################################## [ 42s] libpcre-8.45-1.4 ######################################## [ 43s] libquadmath-14.1.0-1.6 ######################################## [ 51s] gcc-14.1.0-1.6 ######################################## [ 51s] libxcrypt-devel-4.4.36-1.7 ######################################## [ 51s] glibc-devel-2.39-1.6 ######################################## [ 51s] libsmack-1.3.1-1.4 ######################################## [ 52s] libsmartcols-2.39.3-1.3 ######################################## [ 52s] libsqlite-3.44.0-1.4 ######################################## [ 53s] libsoftokn3-3.98-1.7 ######################################## [ 53s] nss-3.98-1.7 ######################################## [ 54s] rpm-4.14.1.1-1.6 ######################################## [ 54s] m4-1.4.19-1.1 ######################################## [ 55s] autoconf-2.71-1.7 ######################################## [ 55s] automake-1.16.5-1.5 ######################################## [ 55s] patch-2.7.6-1.4 ######################################## [ 55s] sed-4.1c-1.4 ######################################## [ 56s] libtool-2.4.7-1.6 ######################################## [ 56s] zlib-devel-1.3-1.5 ######################################## [ 56s] build-20120927-1.1 ######################################## [ 56s] libncurses-6.4-1.7 ######################################## [ 56s] util-macros-1.19.0-1.1 ######################################## [ 57s] libstdc++-devel-14.1.0-1.6 ######################################## [ 57s] build-compare-2023.06.18-1.2 ######################################## [ 57s] util-linux-2.39.3-1.3 ######################################## [ 57s] util-linux-su-2.39.3-1.3 ######################################## [ 58s] rpm-build-4.14.1.1-1.6 ######################################## [ 58s] smack-1.3.1-1.4 ######################################## [ 58s] grep-2.5.2-1.3 ######################################## [ 58s] elfutils-0.189-1.6 ######################################## [ 58s] less-643-1.1 ######################################## [ 58s] file-5.45-1.4 ######################################## [ 59s] glibc-locale-2.39-1.6 ######################################## [ 59s] tzdata-2023c-1.1 ######################################## [ 62s] cpp-14.1.0-1.6 ######################################## [ 65s] gcc-c++-14.1.0-1.6 ######################################## [ 65s] gawk-3.1.5-1.1 ######################################## [ 65s] cpio-2.8-1.1 ######################################## [ 65s] diffutils-3.10-1.1 ######################################## [ 65s] hostname-3.23-1.1 ######################################## [ 65s] net-tools-2.0_20121208git-1.4 ######################################## [ 65s] update-alternatives-1.22.2-1.1 ######################################## [ 65s] which-2.17-1.1 ######################################## [ 65s] now finalizing build dir... [ 66s] ----------------------------------------------------------------- [ 66s] I have the following modifications for libpciaccess.spec: [ 66s] 6c6 [ 66s] < Release: 0 [ 66s] --- [ 66s] > Release: 1.1 [ 66s] 84a85 [ 66s] > %changelog [ 66s] build target is i686-tizen-linux [ 66s] ----------------------------------------------------------------- [ 66s] ----- building libpciaccess.spec (user abuild) [ 66s] ----------------------------------------------------------------- [ 66s] ----------------------------------------------------------------- [ 66s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 66s] Building target platforms: i686-tizen-linux [ 66s] Building for target i686-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.za19vd [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf libpciaccess-0.13.2 [ 66s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 66s] + /bin/tar -xof - [ 67s] + STATUS=0 [ 67s] + '[' 0 -ne 0 ']' [ 67s] + cd libpciaccess-0.13.2 [ 67s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 67s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 67s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 67s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 67s] patching file src/Makefile.am [ 67s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 67s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 67s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 67s] patching file src/common_bridge.c [ 67s] patching file src/linux_sysfs.c [ 67s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 67s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 67s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 67s] patching file src/linux_sysfs.c [ 67s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 67s] + exit 0 [ 67s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.PJZoMj [ 67s] + umask 022 [ 67s] + cd /home/abuild/rpmbuild/BUILD [ 67s] + cd libpciaccess-0.13.2 [ 67s] + ref=/usr/lib/rpm [ 67s] + mints=0 [ 67s] + case $(uname -m) in [ 67s] ++ uname -m [ 67s] + for s in guess sub [ 67s] ++ find -maxdepth 8 -name config.guess [ 67s] + for s in guess sub [ 67s] ++ find -maxdepth 8 -name config.sub [ 67s] + LANG=C [ 67s] + export LANG [ 67s] + unset DISPLAY [ 67s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 67s] + export CFLAGS [ 67s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 67s] + export CXXFLAGS [ 67s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 67s] + export FFLAGS [ 67s] + LDFLAGS= [ 67s] + export LDFLAGS [ 67s] + NOCONFIGURE=1 [ 67s] + AR=gcc-ar [ 67s] + export AR [ 67s] + NM=/bin/nm [ 67s] + export NM [ 67s] + RANLIB=gcc-ranlib [ 67s] + export RANLIB [ 67s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 67s] + export CFLAGS [ 67s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 67s] + export CXXFLAGS [ 67s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 67s] + export FFLAGS [ 67s] + ./autogen.sh --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 67s] autoreconf: export WARNINGS= [ 67s] autoreconf: Entering directory '.' [ 67s] autoreconf: configure.ac: not using Gettext [ 68s] autoreconf: running: aclocal -I m4 [ 69s] autoreconf: configure.ac: tracing [ 70s] autoreconf: running: libtoolize --copy [ 70s] libtoolize: putting auxiliary files in '.'. [ 70s] libtoolize: copying file './ltmain.sh' [ 70s] libtoolize: putting macros in 'm4'. [ 70s] libtoolize: copying file 'm4/libtool.m4' [ 70s] libtoolize: copying file 'm4/ltoptions.m4' [ 71s] libtoolize: copying file 'm4/ltsugar.m4' [ 71s] libtoolize: copying file 'm4/ltversion.m4' [ 71s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 71s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 71s] libtoolize: and rerunning libtoolize and aclocal. [ 71s] autoreconf: configure.ac: not using Intltool [ 71s] autoreconf: configure.ac: not using Gtkdoc [ 71s] autoreconf: running: aclocal -I m4 [ 73s] autoreconf: running: /usr/bin/autoconf [ 74s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 74s] configure.ac:36: You should run autoupdate. [ 74s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 74s] configure.ac:36: the top level [ 74s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 74s] configure.ac:42: You should run autoupdate. [ 74s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 74s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 74s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 74s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 74s] configure.ac:42: the top level [ 74s] autoreconf: running: /usr/bin/autoheader [ 75s] autoreconf: running: automake --add-missing --copy --no-force [ 78s] configure.ac:33: installing './compile' [ 78s] configure.ac:36: installing './config.guess' [ 78s] configure.ac:36: installing './config.sub' [ 78s] configure.ac:32: installing './install-sh' [ 78s] configure.ac:32: installing './missing' [ 78s] scanpci/Makefile.am: installing './depcomp' [ 79s] autoreconf: Leaving directory '.' [ 80s] checking for a BSD-compatible install... /bin/install -c [ 80s] checking whether build environment is sane... yes [ 80s] checking for a race-free mkdir -p... /bin/mkdir -p [ 80s] checking for gawk... gawk [ 80s] checking whether make sets $(MAKE)... yes [ 80s] checking whether make supports nested variables... yes [ 81s] checking whether make supports the include directive... yes (GNU style) [ 81s] checking for i686-tizen-linux-gnu-gcc... no [ 81s] checking for gcc... gcc [ 81s] checking whether the C compiler works... yes [ 81s] checking for C compiler default output file name... a.out [ 81s] checking for suffix of executables... [ 81s] checking whether we are cross compiling... no [ 81s] checking for suffix of object files... o [ 82s] checking whether the compiler supports GNU C... yes [ 82s] checking whether gcc accepts -g... yes [ 82s] checking for gcc option to enable C11 features... none needed [ 82s] checking whether gcc understands -c and -o together... yes [ 82s] checking dependency style of gcc... gcc3 [ 82s] checking for stdio.h... yes [ 82s] checking for stdlib.h... yes [ 83s] checking for string.h... yes [ 83s] checking for inttypes.h... yes [ 83s] checking for stdint.h... yes [ 83s] checking for strings.h... yes [ 83s] checking for sys/stat.h... yes [ 83s] checking for sys/types.h... yes [ 83s] checking for unistd.h... yes [ 83s] checking for wchar.h... yes [ 83s] checking for minix/config.h... no [ 83s] checking whether it is safe to define __EXTENSIONS__... yes [ 83s] checking whether _XOPEN_SOURCE should be defined... no [ 84s] checking build system type... i686-tizen-linux-gnu [ 84s] checking host system type... i686-tizen-linux-gnu [ 84s] checking how to print strings... printf [ 84s] checking for a sed that does not truncate output... /bin/sed [ 84s] checking for grep that handles long lines and -e... /bin/grep [ 84s] checking for egrep... /bin/grep -E [ 84s] checking for fgrep... /bin/grep -F [ 84s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 84s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 84s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 84s] checking the name lister (/bin/nm) interface... BSD nm [ 84s] checking whether ln -s works... yes [ 84s] checking the maximum length of command line arguments... 1572864 [ 84s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 84s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 84s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 84s] checking for i686-tizen-linux-gnu-file... no [ 84s] checking for file... file [ 84s] checking for i686-tizen-linux-gnu-objdump... no [ 84s] checking for objdump... objdump [ 84s] checking how to recognize dependent libraries... pass_all [ 84s] checking for i686-tizen-linux-gnu-dlltool... no [ 84s] checking for dlltool... no [ 84s] checking how to associate runtime and link libraries... printf %s\n [ 84s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 84s] checking for archiver @FILE support... @ [ 84s] checking for i686-tizen-linux-gnu-strip... no [ 84s] checking for strip... strip [ 84s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 84s] checking command to parse /bin/nm output from gcc object... ok [ 84s] checking for sysroot... no [ 84s] checking for a working dd... /bin/dd [ 84s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 84s] checking for i686-tizen-linux-gnu-mt... no [ 84s] checking for mt... no [ 84s] checking if : is a manifest tool... no [ 84s] checking for dlfcn.h... yes [ 84s] checking for objdir... .libs [ 85s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 85s] checking for gcc option to produce PIC... -fPIC -DPIC [ 85s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 85s] checking if gcc static flag -static works... no [ 85s] checking if gcc supports -c -o file.o... yes [ 85s] checking if gcc supports -c -o file.o... (cached) yes [ 85s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 85s] checking whether -lc should be explicitly linked in... no [ 85s] checking dynamic linker characteristics... GNU/Linux ld.so [ 85s] checking how to hardcode library paths into programs... immediate [ 85s] checking whether stripping libraries is possible... yes [ 85s] checking if libtool supports shared libraries... yes [ 85s] checking whether to build shared libraries... yes [ 85s] checking whether to build static libraries... yes [ 85s] checking for gcc options needed to detect all undeclared functions... none needed [ 85s] checking whether __clang__ is declared... no [ 86s] checking whether __INTEL_COMPILER is declared... no [ 86s] checking whether __SUNPRO_C is declared... no [ 86s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 86s] checking pkg-config is at least version 0.9.0... yes [ 86s] checking if gcc supports -Werror=unknown-warning-option... no [ 86s] checking if gcc supports -Werror=unused-command-line-argument... no [ 86s] checking if gcc supports -Wall... yes [ 86s] checking if gcc supports -Wpointer-arith... yes [ 86s] checking if gcc supports -Wmissing-declarations... yes [ 86s] checking if gcc supports -Wformat=2... yes [ 86s] checking if gcc supports -Wstrict-prototypes... yes [ 87s] checking if gcc supports -Wmissing-prototypes... yes [ 87s] checking if gcc supports -Wnested-externs... yes [ 87s] checking if gcc supports -Wbad-function-cast... yes [ 87s] checking if gcc supports -Wold-style-definition... yes [ 87s] checking if gcc supports -Wdeclaration-after-statement... yes [ 87s] checking if gcc supports -Wunused... yes [ 87s] checking if gcc supports -Wuninitialized... yes [ 88s] checking if gcc supports -Wshadow... yes [ 88s] checking if gcc supports -Wmissing-noreturn... yes [ 88s] checking if gcc supports -Wmissing-format-attribute... yes [ 88s] checking if gcc supports -Wredundant-decls... yes [ 88s] checking if gcc supports -Wlogical-op... yes [ 88s] checking if gcc supports -Werror=implicit... yes [ 88s] checking if gcc supports -Werror=nonnull... yes [ 88s] checking if gcc supports -Werror=init-self... yes [ 88s] checking if gcc supports -Werror=main... yes [ 88s] checking if gcc supports -Werror=missing-braces... yes [ 88s] checking if gcc supports -Werror=sequence-point... yes [ 88s] checking if gcc supports -Werror=return-type... yes [ 89s] checking if gcc supports -Werror=trigraphs... yes [ 89s] checking if gcc supports -Werror=array-bounds... yes [ 89s] checking if gcc supports -Werror=write-strings... yes [ 89s] checking if gcc supports -Werror=address... yes [ 89s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 89s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 89s] checking if gcc supports -pedantic... yes [ 89s] checking if gcc supports -Werror... yes [ 89s] checking if gcc supports -Werror=attributes... yes [ 89s] checking whether make supports nested variables... (cached) yes [ 89s] checking for special C compiler options needed for large files... no [ 89s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 89s] checking for err.h... yes [ 89s] checking for asm/mtrr.h... yes [ 89s] checking for struct pci_io.pi_sel.pc_domain... no [ 90s] checking that generated files are newer than configure... done [ 90s] configure: creating ./config.status [ 91s] config.status: creating Makefile [ 91s] config.status: creating include/Makefile [ 91s] config.status: creating man/Makefile [ 91s] config.status: creating src/Makefile [ 91s] config.status: creating scanpci/Makefile [ 91s] config.status: creating pciaccess.pc [ 91s] config.status: creating config.h [ 91s] config.status: executing depfiles commands [ 91s] config.status: executing libtool commands [ 91s] + export 'CFLAGS=-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 91s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 91s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 91s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 91s] + AR=gcc-ar [ 91s] + export AR [ 91s] + NM=/bin/nm [ 91s] + export NM [ 91s] + RANLIB=gcc-ranlib [ 91s] + export RANLIB [ 91s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 91s] checking for a BSD-compatible install... /bin/install -c [ 91s] checking whether build environment is sane... yes [ 91s] checking for a race-free mkdir -p... /bin/mkdir -p [ 91s] checking for gawk... gawk [ 91s] checking whether make sets $(MAKE)... yes [ 91s] checking whether make supports nested variables... yes [ 91s] checking whether make supports the include directive... yes (GNU style) [ 91s] checking for i686-tizen-linux-gnu-gcc... no [ 91s] checking for gcc... gcc [ 92s] checking whether the C compiler works... yes [ 92s] checking for C compiler default output file name... a.out [ 92s] checking for suffix of executables... [ 92s] checking whether we are cross compiling... no [ 92s] checking for suffix of object files... o [ 92s] checking whether the compiler supports GNU C... yes [ 92s] checking whether gcc accepts -g... yes [ 92s] checking for gcc option to enable C11 features... none needed [ 92s] checking whether gcc understands -c and -o together... yes [ 92s] checking dependency style of gcc... gcc3 [ 92s] checking for stdio.h... yes [ 92s] checking for stdlib.h... yes [ 92s] checking for string.h... yes [ 92s] checking for inttypes.h... yes [ 92s] checking for stdint.h... yes [ 92s] checking for strings.h... yes [ 92s] checking for sys/stat.h... yes [ 92s] checking for sys/types.h... yes [ 93s] checking for unistd.h... yes [ 93s] checking for wchar.h... yes [ 93s] checking for minix/config.h... no [ 93s] checking whether it is safe to define __EXTENSIONS__... yes [ 93s] checking whether _XOPEN_SOURCE should be defined... no [ 93s] checking build system type... i686-tizen-linux-gnu [ 93s] checking host system type... i686-tizen-linux-gnu [ 93s] checking how to print strings... printf [ 93s] checking for a sed that does not truncate output... /bin/sed [ 93s] checking for grep that handles long lines and -e... /bin/grep [ 93s] checking for egrep... /bin/grep -E [ 93s] checking for fgrep... /bin/grep -F [ 93s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 93s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 93s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 93s] checking the name lister (/bin/nm) interface... BSD nm [ 93s] checking whether ln -s works... yes [ 93s] checking the maximum length of command line arguments... 1572864 [ 93s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 93s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 93s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 93s] checking for i686-tizen-linux-gnu-file... no [ 93s] checking for file... file [ 93s] checking for i686-tizen-linux-gnu-objdump... no [ 93s] checking for objdump... objdump [ 93s] checking how to recognize dependent libraries... pass_all [ 93s] checking for i686-tizen-linux-gnu-dlltool... no [ 93s] checking for dlltool... no [ 93s] checking how to associate runtime and link libraries... printf %s\n [ 93s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 93s] checking for archiver @FILE support... @ [ 93s] checking for i686-tizen-linux-gnu-strip... no [ 93s] checking for strip... strip [ 93s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 93s] checking command to parse /bin/nm output from gcc object... ok [ 93s] checking for sysroot... no [ 94s] checking for a working dd... /bin/dd [ 94s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 94s] checking for i686-tizen-linux-gnu-mt... no [ 94s] checking for mt... no [ 94s] checking if : is a manifest tool... no [ 94s] checking for dlfcn.h... yes [ 94s] checking for objdir... .libs [ 94s] checking if gcc supports -fno-rtti -fno-exceptions... yes [ 94s] checking for gcc option to produce PIC... -fPIC -DPIC [ 94s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 94s] checking if gcc static flag -static works... no [ 94s] checking if gcc supports -c -o file.o... yes [ 94s] checking if gcc supports -c -o file.o... (cached) yes [ 94s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 94s] checking whether -lc should be explicitly linked in... no [ 94s] checking dynamic linker characteristics... GNU/Linux ld.so [ 94s] checking how to hardcode library paths into programs... immediate [ 94s] checking whether stripping libraries is possible... yes [ 94s] checking if libtool supports shared libraries... yes [ 94s] checking whether to build shared libraries... yes [ 94s] checking whether to build static libraries... no [ 94s] checking for gcc options needed to detect all undeclared functions... none needed [ 94s] checking whether __clang__ is declared... no [ 94s] checking whether __INTEL_COMPILER is declared... no [ 94s] checking whether __SUNPRO_C is declared... no [ 94s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 94s] checking pkg-config is at least version 0.9.0... yes [ 94s] checking if gcc supports -Werror=unknown-warning-option... no [ 95s] checking if gcc supports -Werror=unused-command-line-argument... no [ 95s] checking if gcc supports -Wall... yes [ 95s] checking if gcc supports -Wpointer-arith... yes [ 95s] checking if gcc supports -Wmissing-declarations... yes [ 95s] checking if gcc supports -Wformat=2... yes [ 95s] checking if gcc supports -Wstrict-prototypes... yes [ 95s] checking if gcc supports -Wmissing-prototypes... yes [ 95s] checking if gcc supports -Wnested-externs... yes [ 95s] checking if gcc supports -Wbad-function-cast... yes [ 95s] checking if gcc supports -Wold-style-definition... yes [ 95s] checking if gcc supports -Wdeclaration-after-statement... yes [ 95s] checking if gcc supports -Wunused... yes [ 96s] checking if gcc supports -Wuninitialized... yes [ 96s] checking if gcc supports -Wshadow... yes [ 96s] checking if gcc supports -Wmissing-noreturn... yes [ 96s] checking if gcc supports -Wmissing-format-attribute... yes [ 96s] checking if gcc supports -Wredundant-decls... yes [ 96s] checking if gcc supports -Wlogical-op... yes [ 96s] checking if gcc supports -Werror=implicit... yes [ 96s] checking if gcc supports -Werror=nonnull... yes [ 96s] checking if gcc supports -Werror=init-self... yes [ 97s] checking if gcc supports -Werror=main... yes [ 97s] checking if gcc supports -Werror=missing-braces... yes [ 97s] checking if gcc supports -Werror=sequence-point... yes [ 97s] checking if gcc supports -Werror=return-type... yes [ 97s] checking if gcc supports -Werror=trigraphs... yes [ 97s] checking if gcc supports -Werror=array-bounds... yes [ 97s] checking if gcc supports -Werror=write-strings... yes [ 97s] checking if gcc supports -Werror=address... yes [ 97s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 97s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 97s] checking if gcc supports -pedantic... yes [ 97s] checking if gcc supports -Werror... yes [ 98s] checking if gcc supports -Werror=attributes... yes [ 98s] checking whether make supports nested variables... (cached) yes [ 98s] checking for gzopen in -lz... yes [ 98s] checking for zlib.h... yes [ 98s] checking for special C compiler options needed for large files... no [ 98s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 98s] checking for err.h... yes [ 98s] checking for asm/mtrr.h... yes [ 98s] checking for struct pci_io.pi_sel.pc_domain... no [ 99s] checking that generated files are newer than configure... done [ 99s] configure: creating ./config.status [ 100s] config.status: creating Makefile [ 100s] config.status: creating include/Makefile [ 100s] config.status: creating man/Makefile [ 100s] config.status: creating src/Makefile [ 100s] config.status: creating scanpci/Makefile [ 101s] config.status: creating pciaccess.pc [ 101s] config.status: creating config.h [ 101s] config.status: executing depfiles commands [ 101s] config.status: executing libtool commands [ 101s] + make -j12 [ 101s] make all-recursive [ 101s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 101s] Making all in include [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 101s] make[2]: Nothing to be done for 'all'. [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 101s] Making all in man [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 101s] GEN scanpci.1 [ 101s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 101s] Making all in src [ 101s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 101s] CC common_bridge.lo [ 101s] CC common_iterator.lo [ 101s] CC common_init.lo [ 101s] CC common_io.lo [ 101s] CC common_interface.lo [ 101s] CC common_device_name.lo [ 101s] CC common_capability.lo [ 101s] CC common_map.lo [ 101s] CC common_vgaarb.lo [ 101s] CC linux_sysfs.lo [ 101s] CC linux_devmem.lo [ 102s] CCLD libpciaccess.la [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 102s] Making all in scanpci [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 102s] CC scanpci.o [ 102s] CCLD scanpci [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] + exit 0 [ 103s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.0WZDm6 [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd libpciaccess-0.13.2 [ 103s] + LANG=C [ 103s] + export LANG [ 103s] + unset DISPLAY [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 install [ 103s] Making install in include [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/include' [ 103s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/include' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 103s] Making install in man [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 103s] Making install in src [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib' [ 103s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib' [ 103s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2 [ 103s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 103s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 103s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.la [ 103s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 103s] Making install in scanpci [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] make[2]: Nothing to be done for 'install-data-am'. [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 103s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] make[2]: Nothing to be done for 'install-exec-am'. [ 103s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/pkgconfig' [ 103s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/pkgconfig' [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/info/dir [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*\.la$' [ 103s] + xargs rm -f -- [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*\.a$' [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/info [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/packages [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/libpciaccess [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/libpciaccess-0.13.2 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/gtk-doc [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/man [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/man./.*.[0-9]' [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/../man./.*.[0-9]' [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/man./.*.[0-9]pm' [ 103s] + xargs rm -f -- [ 103s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 103s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2 [ 103s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_line_str [ 103s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 103s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 103s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 103s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 103s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 103s] + /usr/lib/rpm/check-buildroot [ 103s] + /usr/lib/rpm//brp-compress [ 103s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 103s] + /usr/lib/rpm/brp-python-hardlink [ 103s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 103s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 103s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 103s] Processing files: libpciaccess-0.13.2-1.1.i686 [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.KXqPle [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd libpciaccess-0.13.2 [ 103s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 103s] + export LC_ALL=C [ 103s] + LC_ALL=C [ 103s] + export LICENSEDIR [ 103s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 103s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 103s] + exit 0 [ 103s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(x86-32) = 0.13.2-1.1 libpciaccess.so.0 [ 103s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Requires(post): /sbin/ldconfig [ 103s] Requires(postun): /sbin/ldconfig [ 103s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 103s] Processing files: libpciaccess-debugsource-0.13.2-1.1.i686 [ 103s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Processing files: libpciaccess-devel-0.13.2-1.1.i686 [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.aZ32lb [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd libpciaccess-0.13.2 [ 103s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 103s] + export LC_ALL=C [ 103s] + LC_ALL=C [ 103s] + export LICENSEDIR [ 103s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 103s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 103s] + exit 0 [ 103s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(x86-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 103s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.i686 [ 103s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 103s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 103s] [ 103s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(x86-32) = 0.13.2-1.1 [ 103s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 103s] Recommends: libpciaccess-debugsource(x86-32) = 0.13.2-1.1 [ 103s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 103s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-0.13.2-1.1.i686.rpm [ 103s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debugsource-0.13.2-1.1.i686.rpm [ 103s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-devel-0.13.2-1.1.i686.rpm [ 103s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debuginfo-0.13.2-1.1.i686.rpm [ 103s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.dEbf8b [ 103s] + umask 022 [ 103s] + cd /home/abuild/rpmbuild/BUILD [ 103s] + cd libpciaccess-0.13.2 [ 103s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 103s] + exit 0 [ 103s] ... checking for files with abuild user/group [ 103s] ... creating baselibs [ 103s] libpciaccess(x86_64:32bit): writing specfile... [ 103s] libpciaccess(x86_64:32bit): running build... [ 104s] libpciaccess-debuginfo(x86_64:32bit): writing specfile... [ 104s] libpciaccess-debuginfo(x86_64:32bit): running build... [ 104s] [ 104s] c064868841dc finished "build libpciaccess.spec" at Sat May 25 07:34:46 UTC 2024. [ 104s]