[    0s] Memory limit set to 71855024KB
[    0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19
[    0s] Using BUILD_ARCH=i586:i486:i386
[    0s] 
[    0s] 
[    0s] c064868841dc started "build perl-Test-Pod.spec" at Sat May 25 07:36:57 UTC 2024.
[    0s] 
[    0s] Building perl-Test-Pod for project 'Tizen-Base-Toolchain' repository 'standard' arch 'i586' srcmd5 'b70e629e156cafcca07f352330f9429f'
[    0s] 
[    0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-Test-Pod.spec ...
[    0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-Test-Pod.spec
[    0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/19/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-Test-Pod.spec build ...
[    2s] cycle: nss -> libsoftokn3
[    2s]   breaking dependency nss -> libsoftokn3
[    2s] [1/37] preinstalling libmagic-data...
[    2s] [2/37] preinstalling libncurses...
[    3s] [3/37] preinstalling setup...
[    3s] [4/37] preinstalling filesystem...
[    3s] [5/37] preinstalling glibc...
[    3s] [6/37] preinstalling bash...
[    3s] [7/37] preinstalling diffutils...
[    3s] [8/37] preinstalling grep...
[    3s] [9/37] preinstalling libattr...
[    4s] [10/37] preinstalling libbz2...
[    4s] [11/37] preinstalling libfreebl3...
[    4s] [12/37] preinstalling libgcc...
[    4s] [13/37] preinstalling liblua...
[    4s] [14/37] preinstalling liblzma...
[    4s] [15/37] preinstalling libpopt...
[    4s] [16/37] preinstalling libreadline...
[    4s] [17/37] preinstalling libsmack...
[    4s] [18/37] preinstalling libsqlite...
[    5s] [19/37] preinstalling libxcrypt...
[    5s] [20/37] preinstalling libzstd1...
[    5s] [21/37] preinstalling nspr...
[    5s] [22/37] preinstalling sed...
[    5s] [23/37] preinstalling zlib...
[    5s] [24/37] preinstalling coreutils...
[    5s] [25/37] preinstalling libacl...
[    5s] [26/37] preinstalling libcap...
[    5s] [27/37] preinstalling libelf...
[    5s] [28/37] preinstalling smack...
[    5s] [29/37] preinstalling bzip2...
[    6s] [30/37] preinstalling libmagic...
[    6s] [31/37] preinstalling libxml2...
[    6s] [32/37] preinstalling util-linux...
[    6s] [33/37] preinstalling tar...
[    6s] [34/37] preinstalling util-linux-su...
[    7s] [35/37] preinstalling nss...
[    7s] [36/37] preinstalling libsoftokn3...
[    7s] [37/37] preinstalling rpm...
[    8s] running setup postinstall script
[    8s] chroot: failed to run command '<lua>': No such file or directory
[    8s] initializing rpm db...
[    8s] reordering...cycle: libxcrypt-devel -> glibc-devel
[    8s]   breaking dependency libxcrypt-devel -> glibc-devel
[    8s] cycle: libsoftokn3 -> nss
[    8s]   breaking dependency nss -> libsoftokn3
[    8s] done
[    8s] querying package ids...
[    9s] [1/97] cumulate libmagic-data-5.45-1.4
[    9s] [2/97] cumulate setup-0.9-1.2
[    9s] [3/97] cumulate filesystem-3.1-1.1
[    9s] [4/97] cumulate glibc-2.39-1.6
[    9s] [5/97] cumulate bash-3.2.57-1.1
[    9s] [6/97] cumulate cpio-2.8-1.1
[    9s] [7/97] cumulate diffutils-3.10-1.1
[    9s] [8/97] cumulate findutils-4.3.8-1.4
[    9s] [9/97] cumulate gdbm-1.8.3-1.7
[    9s] [10/97] cumulate hostname-3.23-1.1
[    9s] [11/97] cumulate libatomic-14.1.0-1.6
[    9s] [12/97] cumulate libattr-2.5.1-1.4
[    9s] [13/97] cumulate libblkid-2.39.3-1.3
[    9s] [14/97] cumulate libbz2-1.0.8-1.4
[    9s] [15/97] cumulate libfreebl3-3.98-1.7
[    9s] [16/97] cumulate libgcc-14.1.0-1.6
[    9s] [17/97] cumulate libgomp-14.1.0-1.6
[    9s] [18/97] cumulate libitm-14.1.0-1.6
[    9s] [19/97] cumulate libltdl-2.4.7-1.6
[    9s] [20/97] cumulate liblua-5.1.5-1.3
[    9s] [21/97] cumulate liblzma-5.4.5-1.7
[    9s] [22/97] cumulate libopenssl3-3.0.13-1.7
[    9s] [23/97] cumulate libpcre-8.45-1.4
[    9s] [24/97] cumulate libpopt-1.16-1.4
[    9s] [25/97] cumulate libquadmath-14.1.0-1.6
[    9s] [26/97] cumulate libsmack-1.3.1-1.4
[    9s] [27/97] cumulate libsmartcols-2.39.3-1.3
[    9s] [28/97] cumulate libsqlite-3.44.0-1.4
[    9s] [29/97] cumulate libuuid-2.39.3-1.3
[    9s] [30/97] cumulate libxcrypt-4.4.36-1.7
[    9s] [31/97] cumulate libzstd1-1.5.5-1.4
[    9s] [32/97] cumulate m4-1.4.19-1.1
[    9s] [33/97] cumulate net-tools-2.0_20121208git-1.4
[    9s] [34/97] cumulate nspr-4.35-1.4
[    9s] [35/97] cumulate patch-2.7.6-1.4
[    9s] [36/97] cumulate pkg-config-0.29.2-1.4
[    9s] [37/97] cumulate sed-4.1c-1.4
[    9s] [38/97] cumulate update-alternatives-1.22.2-1.1
[    9s] [39/97] cumulate which-2.17-1.1
[    9s] [40/97] cumulate zlib-1.3-1.5
[    9s] [41/97] cumulate build-compare-2023.06.18-1.2
[    9s] [42/97] cumulate binutils-libs-2.42-1.6
[    9s] [43/97] cumulate coreutils-6.9-14.2
[    9s] [44/97] cumulate cpp-14.1.0-1.6
[    9s] [45/97] cumulate gawk-3.1.5-1.1
[    9s] [46/97] cumulate gcc-c++-14.1.0-1.6
[    9s] [47/97] cumulate grep-2.5.2-1.3
[    9s] [48/97] cumulate libacl-2.3.2-1.4
[    9s] [49/97] cumulate libcap-2.69-1.5
[    9s] [50/97] cumulate libelf-0.189-1.6
[    9s] [51/97] cumulate libgfortran-14.1.0-1.6
[    9s] [52/97] cumulate libmount-2.39.3-1.3
[    9s] [53/97] cumulate libstdc++-14.1.0-1.6
[    9s] [54/97] cumulate make-4.4-1.3
[    9s] [55/97] cumulate nss-certs-3.98-1.7
[    9s] [56/97] cumulate smack-1.3.1-1.4
[    9s] [57/97] cumulate bzip2-1.0.8-1.4
[    9s] [58/97] cumulate libfdisk-2.39.3-1.3
[    9s] [59/97] cumulate libmagic-5.45-1.4
[    9s] [60/97] cumulate libxml2-2.12.5-1.6
[    9s] [61/97] cumulate xz-5.4.5-1.7
[    9s] [62/97] cumulate perl-5.38.0-1.4
[    9s] [63/97] cumulate build-mkbaselibs-20120927-1.1
[    9s] [64/97] cumulate libstdc++-devel-14.1.0-1.6
[    9s] [65/97] cumulate linux-glibc-devel-6.6-1.7
[    9s] [66/97] cumulate perl-Module-Build-0.4234-1.1
[    9s] [67/97] cumulate file-5.45-1.4
[    9s] [68/97] cumulate tar-1.17-1.1
[    9s] [69/97] cumulate terminfo-base-full-6.4-1.7
[    9s] [70/97] cumulate autoconf-2.71-1.7
[    9s] [71/97] cumulate glibc-locale-2.39-1.6
[    9s] [72/97] cumulate gzip-1.3.12-1.4
[    9s] [73/97] cumulate libcc1-14.1.0-1.6
[    9s] [74/97] cumulate libubsan-14.1.0-1.6
[    9s] [75/97] cumulate binutils-2.42-1.6
[    9s] [76/97] cumulate pam-1.1.6-1.5
[    9s] [77/97] cumulate tzdata-2023c-1.1
[    9s] [78/97] cumulate libdw-0.189-1.6
[    9s] [79/97] cumulate libarchive-3.7.2-1.5
[    9s] [80/97] cumulate automake-1.16.5-1.5
[    9s] [81/97] cumulate libasm-0.189-1.6
[    9s] [82/97] cumulate libncurses6-6.4-1.7
[    9s] [83/97] cumulate build-20120927-1.1
[    9s] [84/97] cumulate gcc-14.1.0-1.6
[    9s] [85/97] cumulate libncurses-6.4-1.7
[    9s] [86/97] cumulate less-643-1.1
[    9s] [87/97] cumulate libreadline-5.2-1.5
[    9s] [88/97] cumulate libtool-2.4.7-1.6
[    9s] [89/97] cumulate elfutils-0.189-1.6
[    9s] [90/97] cumulate util-linux-2.39.3-1.3
[    9s] [91/97] cumulate util-linux-su-2.39.3-1.3
[    9s] [92/97] cumulate libxcrypt-devel-4.4.36-1.7
[    9s] [93/97] cumulate nss-3.98-1.7
[    9s] [94/97] cumulate glibc-devel-2.39-1.6
[    9s] [95/97] cumulate libsoftokn3-3.98-1.7
[    9s] [96/97] cumulate rpm-4.14.1.1-1.6
[    9s] [97/97] cumulate rpm-build-4.14.1.1-1.6
[    9s] now installing cumulated packages
[   10s] Preparing...                          ########################################
[   10s] Updating / installing...
[   10s] setup-0.9-1.2                         ########################################
[   10s] filesystem-3.1-1.1                    ########################################
[   10s] libmagic-data-5.45-1.4                ########################################
[   11s] glibc-2.39-1.6                        ########################################
[   11s] bash-3.2.57-1.1                       ########################################
[   11s] zlib-1.3-1.5                          ########################################
[   11s] libgcc-14.1.0-1.6                     ########################################
[   12s] libstdc++-14.1.0-1.6                  ########################################
[   12s] coreutils-6.9-14.2                    ########################################
[   12s] libbz2-1.0.8-1.4                      ########################################
[   13s] liblzma-5.4.5-1.7                     ########################################
[   13s] libelf-0.189-1.6                      ########################################
[   13s] libdw-0.189-1.6                       ########################################
[   13s] libxcrypt-4.4.36-1.7                  ########################################
[   13s] libmagic-5.45-1.4                     ########################################
[   14s] libblkid-2.39.3-1.3                   ########################################
[   14s] nspr-4.35-1.4                         ########################################
[   14s] pam-1.1.6-1.5                         ########################################
[   14s] libcap-2.69-1.5                       ########################################
[   15s] libfreebl3-3.98-1.7                   ########################################
[   15s] liblua-5.1.5-1.3                      ########################################
[   16s] libpopt-1.16-1.4                      ########################################
[   16s] libuuid-2.39.3-1.3                    ########################################
[   17s] libzstd1-1.5.5-1.4                    ########################################
[   17s] linux-glibc-devel-6.6-1.7             ########################################
[   17s] terminfo-base-full-6.4-1.7            ########################################
[   18s] libncurses6-6.4-1.7                   ########################################
[   18s] libreadline-5.2-1.5                   ########################################
[   18s] libfdisk-2.39.3-1.3                   ########################################
[   19s] nss-certs-3.98-1.7                    ########################################
[   19s] libmount-2.39.3-1.3                   ########################################
[   19s] libasm-0.189-1.6                      ########################################
[   19s] libxml2-2.12.5-1.6                    ########################################
[   19s] xz-5.4.5-1.7                          ########################################
[   19s] bzip2-1.0.8-1.4                       ########################################
[   19s] gzip-1.3.12-1.4                       ########################################
[   19s] libcc1-14.1.0-1.6                     ########################################
[   20s] libubsan-14.1.0-1.6                   ########################################
[   20s] libgfortran-14.1.0-1.6                ########################################
[   21s] binutils-libs-2.42-1.6                ########################################
[   22s] binutils-2.42-1.6                     ########################################
[   22s] make-4.4-1.3                          ########################################
[   23s] findutils-4.3.8-1.4                   ########################################
[   23s] gdbm-1.8.3-1.7                        ########################################
[   28s] perl-5.38.0-1.4                       ########################################
[   28s] build-mkbaselibs-20120927-1.1         ########################################
[   28s] libatomic-14.1.0-1.6                  ########################################
[   29s] libattr-2.5.1-1.4                     ########################################
[   29s] libacl-2.3.2-1.4                      ########################################
[   29s] tar-1.17-1.1                          ########################################
[   29s] libgomp-14.1.0-1.6                    ########################################
[   30s] libitm-14.1.0-1.6                     ########################################
[   30s] libltdl-2.4.7-1.6                     ########################################
[   31s] libopenssl3-3.0.13-1.7                ########################################
[   31s] libarchive-3.7.2-1.5                  ########################################
[   31s] libpcre-8.45-1.4                      ########################################
[   32s] libquadmath-14.1.0-1.6                ########################################
[   40s] gcc-14.1.0-1.6                        ########################################
[   40s] libsmack-1.3.1-1.4                    ########################################
[   40s] libsmartcols-2.39.3-1.3               ########################################
[   41s] libsqlite-3.44.0-1.4                  ########################################
[   41s] libsoftokn3-3.98-1.7                  ########################################
[   42s] nss-3.98-1.7                          ########################################
[   42s] rpm-4.14.1.1-1.6                      ########################################
[   43s] m4-1.4.19-1.1                         ########################################
[   43s] autoconf-2.71-1.7                     ########################################
[   43s] automake-1.16.5-1.5                   ########################################
[   43s] patch-2.7.6-1.4                       ########################################
[   43s] pkg-config-0.29.2-1.4                 ########################################
[   43s] libxcrypt-devel-4.4.36-1.7            ########################################
[   44s] glibc-devel-2.39-1.6                  ########################################
[   44s] sed-4.1c-1.4                          ########################################
[   44s] libtool-2.4.7-1.6                     ########################################
[   44s] build-20120927-1.1                    ########################################
[   44s] perl-Module-Build-0.4234-1.1          ########################################
[   44s] libncurses-6.4-1.7                    ########################################
[   45s] libstdc++-devel-14.1.0-1.6            ########################################
[   45s] build-compare-2023.06.18-1.2          ########################################
[   46s] util-linux-2.39.3-1.3                 ########################################
[   46s] util-linux-su-2.39.3-1.3              ########################################
[   46s] rpm-build-4.14.1.1-1.6                ########################################
[   46s] smack-1.3.1-1.4                       ########################################
[   46s] grep-2.5.2-1.3                        ########################################
[   46s] elfutils-0.189-1.6                    ########################################
[   46s] less-643-1.1                          ########################################
[   46s] file-5.45-1.4                         ########################################
[   47s] glibc-locale-2.39-1.6                 ########################################
[   47s] tzdata-2023c-1.1                      ########################################
[   50s] cpp-14.1.0-1.6                        ########################################
[   53s] gcc-c++-14.1.0-1.6                    ########################################
[   53s] gawk-3.1.5-1.1                        ########################################
[   53s] cpio-2.8-1.1                          ########################################
[   53s] diffutils-3.10-1.1                    ########################################
[   53s] hostname-3.23-1.1                     ########################################
[   53s] net-tools-2.0_20121208git-1.4         ########################################
[   53s] update-alternatives-1.22.2-1.1        ########################################
[   53s] which-2.17-1.1                        ########################################
[   54s] now finalizing build dir...
[   54s] -----------------------------------------------------------------
[   54s] I have the following modifications for perl-Test-Pod.spec:
[   54s] 4c4
[   54s] < Release:        1
[   54s] ---
[   54s] > Release:        1.1
[   55s] build target is i686-tizen-linux
[   55s] -----------------------------------------------------------------
[   55s] ----- building perl-Test-Pod.spec (user abuild)
[   55s] -----------------------------------------------------------------
[   55s] -----------------------------------------------------------------
[   55s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Toolchain/standard/b70e629e156cafcca07f352330f9429f-perl-Test-Pod' /home/abuild/rpmbuild/SOURCES/perl-Test-Pod.spec
[   55s] Building target platforms: i686-tizen-linux
[   55s] Building for target i686-tizen-linux
[   55s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.7hGSj5
[   55s] + umask 022
[   55s] + cd /home/abuild/rpmbuild/BUILD
[   55s] + cd /home/abuild/rpmbuild/BUILD
[   55s] + rm -rf Test-Pod-1.52
[   55s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/Test-Pod-1.52.tar.gz
[   55s] + /bin/tar -xof -
[   55s] + STATUS=0
[   55s] + '[' 0 -ne 0 ']'
[   55s] + cd Test-Pod-1.52
[   55s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   55s] + cp /home/abuild/rpmbuild/SOURCES/perl-Test-Pod.manifest .
[   55s] + cp /home/abuild/rpmbuild/SOURCES/LICENSE .
[   55s] + exit 0
[   55s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.sjalJT
[   55s] + umask 022
[   55s] + cd /home/abuild/rpmbuild/BUILD
[   55s] + cd Test-Pod-1.52
[   55s] + ref=/usr/lib/rpm
[   55s] + mints=0
[   55s] + case $(uname -m) in
[   55s] ++ uname -m
[   55s] + for s in guess sub
[   55s] ++ find -maxdepth 8 -name config.guess
[   55s] + for s in guess sub
[   55s] ++ find -maxdepth 8 -name config.sub
[   55s] + LANG=C
[   55s] + export LANG
[   55s] + unset DISPLAY
[   55s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g'
[   55s] + export CFLAGS
[   55s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g'
[   55s] + export CXXFLAGS
[   55s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir'
[   55s] + export FFLAGS
[   55s] + LDFLAGS=
[   55s] + export LDFLAGS
[   55s] + perl Makefile.PL
[   56s] Checking if your kit is complete...
[   56s] Looks good
[   56s] Generating a Unix-style Makefile
[   56s] Writing Makefile for Test::Pod
[   56s] Writing MYMETA.yml and MYMETA.json
[   56s] + /bin/make
[   57s] cp lib/Test/Pod.pm blib/lib/Test/Pod.pm
[   57s] Manifying 1 pod document
[   57s] + exit 0
[   57s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.OSsO0Y
[   57s] + umask 022
[   57s] + cd /home/abuild/rpmbuild/BUILD
[   57s] + cd Test-Pod-1.52
[   57s] + LANG=C
[   57s] + export LANG
[   57s] + unset DISPLAY
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386
[   57s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386
[   57s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 install_vendor
[   57s] Manifying 1 pod document
[   57s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/Test/Pod.pm
[   57s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/man/man3/Test::Pod.3
[   57s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/5.38.0/i686-linux-thread-multi/perllocal.pod
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/info
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/doc/packages
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/doc/perl-Test-Pod
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/doc/perl-Test-Pod-1.52
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/gtk-doc
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/doc
[   57s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/man
[   57s] + xargs rm -f --
[   57s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 -regex '.*/man/man./.*.[0-9]'
[   57s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 -regex '.*/man/../man./.*.[0-9]'
[   57s] + xargs rm -f --
[   57s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 -regex '.*/man/man./.*.[0-9]pm'
[   57s] + xargs rm -f --
[   57s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto
[   57s] + find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto -name .packlist -print0
[   57s] + xargs -0 -r rm
[   57s] + '[' i686 == noarch ']'
[   57s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/5.38.0/i686-linux-thread-multi/perllocal.pod
[   57s] + FILES=perl-Test-Pod.files
[   57s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f
[   57s] + RES=
[   57s] + '[' -n '' ']'
[   57s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/
[   57s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ -type d
[   57s] ++ sort
[   57s] + for dir in '`find ${base_dir} -type d | sort`'
[   57s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   57s] + continue
[   57s] + for dir in '`find ${base_dir} -type d | sort`'
[   57s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/Test = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   57s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/Test
[   57s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[   58s] + el=Test
[   58s] + all_dir=(${all_dir[@]} $el)
[   58s] + for dir in '`find ${base_dir} -type d | sort`'
[   58s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   58s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[   58s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi
[   58s] + el=i686-linux-thread-multi
[   58s] + all_dir=(${all_dir[@]} $el)
[   58s] + for dir in '`find ${base_dir} -type d | sort`'
[   58s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   58s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto
[   58s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[   58s] + el=i686-linux-thread-multi/auto
[   58s] + all_dir=(${all_dir[@]} $el)
[   58s] + for dir in '`find ${base_dir} -type d | sort`'
[   58s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   58s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test
[   58s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[   58s] + el=i686-linux-thread-multi/auto/Test
[   58s] + all_dir=(${all_dir[@]} $el)
[   58s] + for dir in '`find ${base_dir} -type d | sort`'
[   58s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test/Pod = /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ ']'
[   58s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test/Pod
[   58s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}'
[   58s] + el=i686-linux-thread-multi/auto/Test/Pod
[   58s] + all_dir=(${all_dir[@]} $el)
[   58s] + for i in '${all_dir[@]}'
[   58s] + '[' Test = auto ']'
[   58s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/Test = /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto ']'
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//Test ']'
[   58s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//Test -maxdepth 1 -type f
[   58s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//Test/Pod.pm
[   58s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//Test/Pod.pm ']'
[   58s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/Test
[   58s] + /bin/cat
[   58s] + for file in '$RES'
[   58s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//Test/Pod.pm
[   58s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/Test/Pod.pm
[   58s] + /bin/cat
[   58s] + for i in '${all_dir[@]}'
[   58s] + '[' i686-linux-thread-multi = auto ']'
[   58s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto ']'
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi ']'
[   58s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi -maxdepth 1 -type f
[   58s] + RES=
[   58s] + '[' -n '' ']'
[   58s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi
[   58s] + /bin/cat
[   58s] + for i in '${all_dir[@]}'
[   58s] + '[' i686-linux-thread-multi/auto = auto ']'
[   58s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto ']'
[   58s] + continue
[   58s] + for i in '${all_dir[@]}'
[   58s] + '[' i686-linux-thread-multi/auto/Test = auto ']'
[   58s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test = /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto ']'
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi/auto/Test ']'
[   58s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi/auto/Test -maxdepth 1 -type f
[   58s] + RES=
[   58s] + '[' -n '' ']'
[   58s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test
[   58s] + /bin/cat
[   58s] + for i in '${all_dir[@]}'
[   58s] + '[' i686-linux-thread-multi/auto/Test/Pod = auto ']'
[   58s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test/Pod = /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto ']'
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi/auto/Test/Pod ']'
[   58s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/lib/perl5/vendor_perl/5.38.0//i686-linux-thread-multi/auto/Test/Pod -maxdepth 1 -type f
[   58s] + RES=
[   58s] + '[' -n '' ']'
[   58s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/i686-linux-thread-multi/auto/Test/Pod
[   58s] + /bin/cat
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/man ']'
[   58s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/var/adm/perl-modules/perl-Test-Pod ']'
[   58s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/bin ']'
[   58s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.52-1.1 --unique-debug-src-base perl-Test-Pod-1.52-1.1.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/Test-Pod-1.52
[   58s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-1.52/perl-Test-Pod-debuginfo.manifest
[   58s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/Test-Pod-1.52/perl-Test-Pod-debugsource.manifest
[   58s] + /usr/lib/rpm/check-buildroot
[   58s] + /usr/lib/rpm//brp-compress
[   58s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[   58s] + /usr/lib/rpm/brp-python-hardlink
[   58s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386
[   58s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/Test-Pod-1.52/isu.list
[   58s] ~/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386 ~/rpmbuild/BUILD/Test-Pod-1.52
[   58s] ~/rpmbuild/BUILD/Test-Pod-1.52
[   58s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.wTTEJ0
[   58s] Processing files: perl-Test-Pod-1.52-1.1.i686
[   58s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   58s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   58s] 
[   58s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.crU2Jn
[   58s] + umask 022
[   58s] + cd /home/abuild/rpmbuild/BUILD
[   58s] + cd Test-Pod-1.52
[   58s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/licenses/perl-Test-Pod
[   58s] + export LC_ALL=C
[   58s] + LC_ALL=C
[   58s] + export LICENSEDIR
[   58s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/licenses/perl-Test-Pod
[   58s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386/usr/share/licenses/perl-Test-Pod
[   58s] + exit 0
[   58s] Provides: perl(Test::Pod) = 1.52 perl-Test-Pod = 1.52-1.1 perl-Test-Pod(x86-32) = 1.52-1.1
[   58s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   58s] Processing files: perl-Test-Pod-debugsource-1.52-1.1.i686
[   58s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/Test-Pod-1.52/debugsourcefiles.list
[   58s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   58s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   58s] 
[   58s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386
[   58s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-Test-Pod-1.52-1.1.src.rpm
[   59s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/perl-Test-Pod-1.52-1.1.i686.rpm
[   59s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/perl-Test-Pod-debugsource-1.52-1.1.i686.rpm
[   59s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.KZ17ET
[   59s] + umask 022
[   59s] + cd /home/abuild/rpmbuild/BUILD
[   59s] + cd Test-Pod-1.52
[   59s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-Test-Pod-1.52-1.1.i386
[   59s] + exit 0
[   59s] ... checking for files with abuild user/group
[   59s] ... creating baselibs
[   59s] 
[   59s] c064868841dc finished "build perl-Test-Pod.spec" at Sat May 25 07:37:56 UTC 2024.
[   59s]