[ 0s] Memory limit set to 71863554KB
[ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11
[ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l
[ 0s]
[ 0s]
[ 0s] 75bee4a44dbd started "build gtk-doc.spec" at Thu Jul 13 17:51:18 UTC 2023.
[ 0s]
[ 0s] Building gtk-doc for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 'b4f14cadd1338b1a2d43df612b5ef79f'
[ 0s]
[ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/gtk-doc.spec ...
[ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/gtk-doc.spec
[ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/11/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.11/.build-srcdir/gtk-doc.spec build ...
[ 2s] registering binfmt handlers for cross build
[ 2s] cycle: nss -> libsoftokn3
[ 2s] breaking dependency nss -> libsoftokn3
[ 2s] [1/41] preinstalling libmagic-data...
[ 2s] [2/41] preinstalling libncurses...
[ 2s] [3/41] preinstalling setup...
[ 2s] [4/41] preinstalling filesystem...
[ 2s] [5/41] preinstalling glibc...
[ 3s] [6/41] preinstalling bash...
[ 3s] [7/41] preinstalling diffutils...
[ 3s] [8/41] preinstalling grep...
[ 3s] [9/41] preinstalling libattr...
[ 3s] [10/41] preinstalling libblkid...
[ 3s] [11/41] preinstalling libbz2...
[ 3s] [12/41] preinstalling libcap...
[ 3s] [13/41] preinstalling libfreebl3...
[ 3s] [14/41] preinstalling libgcc...
[ 3s] [15/41] preinstalling liblua...
[ 3s] [16/41] preinstalling liblzma...
[ 3s] [17/41] preinstalling libpopt...
[ 3s] [18/41] preinstalling libreadline...
[ 3s] [19/41] preinstalling libsmack...
[ 3s] [20/41] preinstalling libsqlite...
[ 3s] [21/41] preinstalling libuuid...
[ 3s] [22/41] preinstalling libzstd1...
[ 3s] [23/41] preinstalling nspr...
[ 3s] [24/41] preinstalling sed...
[ 3s] [25/41] preinstalling zlib...
[ 3s] [26/41] preinstalling qemu-accel-x86_64-aarch64...
[ 13s] [27/41] preinstalling qemu-linux-user-x86_64-cross...
[ 17s] [28/41] preinstalling coreutils...
[ 17s] [29/41] preinstalling libacl...
[ 17s] [30/41] preinstalling libelf...
[ 17s] [31/41] preinstalling libmount...
[ 17s] [32/41] preinstalling smack...
[ 17s] [33/41] preinstalling bzip2...
[ 17s] [34/41] preinstalling libmagic...
[ 17s] [35/41] preinstalling libxml2...
[ 18s] [36/41] preinstalling tar...
[ 18s] [37/41] preinstalling util-linux...
[ 18s] [38/41] preinstalling util-linux-su...
[ 18s] [39/41] preinstalling nss...
[ 18s] [40/41] preinstalling libsoftokn3...
[ 18s] [41/41] preinstalling rpm...
[ 19s] running qemu-linux-user-x86_64-cross postinstall script
[ 19s] running qemu-accel-x86_64-aarch64 postinstall script
[ 19s] running setup postinstall script
[ 19s] chroot: failed to run command '<lua>': No such file or directory
[ 19s] initializing rpm db...
[ 19s] reordering...cycle: libsoftokn3 -> nss
[ 19s] breaking dependency nss -> libsoftokn3
[ 19s] done
[ 19s] querying package ids...
[ 20s] [1/117] cumulate libmagic-data-5.44-1.6
[ 20s] [2/117] cumulate setup-0.9-1.1
[ 20s] [3/117] cumulate filesystem-3.1-1.1
[ 20s] [4/117] cumulate glibc-2.30-1.8
[ 20s] [5/117] cumulate bash-3.2.57-1.1
[ 20s] [6/117] cumulate cpio-2.8-1.1
[ 20s] [7/117] cumulate diffutils-3.8-1.1
[ 20s] [8/117] cumulate findutils-4.3.8-1.7
[ 20s] [9/117] cumulate gdbm-1.8.3-1.8
[ 20s] [10/117] cumulate hostname-3.23-1.1
[ 20s] [11/117] cumulate libatomic-9.2.0-1.9
[ 20s] [12/117] cumulate libattr-2.5.1-1.7
[ 20s] [13/117] cumulate libblkid-2.37.4-15.7
[ 20s] [14/117] cumulate libbz2-1.0.8-1.7
[ 20s] [15/117] cumulate libcap-2.24-1.6
[ 20s] [16/117] cumulate libexpat-2.4.1-1.8
[ 20s] [17/117] cumulate libext2fs-1.46.0-1.7
[ 20s] [18/117] cumulate libffi-3.4.2-1.8
[ 20s] [19/117] cumulate libfreebl3-3.87-1.8
[ 20s] [20/117] cumulate libgcc-9.2.0-1.9
[ 20s] [21/117] cumulate libgomp-9.2.0-1.9
[ 20s] [22/117] cumulate libgpg-error-1.46-1.1
[ 20s] [23/117] cumulate libitm-9.2.0-1.9
[ 20s] [24/117] cumulate libltdl-2.4.7-1.8
[ 20s] [25/117] cumulate liblua-5.1.5-1.6
[ 20s] [26/117] cumulate liblzma-5.4.0-1.8
[ 20s] [27/117] cumulate libopenssl11-1.1.1u-1.8
[ 20s] [28/117] cumulate libpcre-8.45-1.1
[ 20s] [29/117] cumulate libpopt-1.16-1.6
[ 20s] [30/117] cumulate libpython-2.7.18-1.8
[ 20s] [31/117] cumulate libpython3_111_0-3.11.2-1.9
[ 20s] [32/117] cumulate libsmack-1.3.1-1.6
[ 20s] [33/117] cumulate libsmartcols-2.37.4-15.7
[ 20s] [34/117] cumulate libsqlite-3.40.1-1.7
[ 20s] [35/117] cumulate libuuid-2.37.4-15.7
[ 20s] [36/117] cumulate libzstd1-1.5.2-1.7
[ 20s] [37/117] cumulate m4-1.4.19-1.1
[ 20s] [38/117] cumulate net-tools-2.0_20121208git-1.1
[ 20s] [39/117] cumulate nspr-4.35-1.6
[ 20s] [40/117] cumulate patch-2.7.6-1.6
[ 20s] [41/117] cumulate pkg-config-0.29.2-1.7
[ 20s] [42/117] cumulate sed-4.1c-1.1
[ 20s] [43/117] cumulate update-alternatives-1.21.18-1.1
[ 20s] [44/117] cumulate which-2.17-1.1
[ 20s] [45/117] cumulate zlib-1.2.13-1.8
[ 20s] [46/117] cumulate build-compare-2015.04.28-1.3
[ 20s] [47/117] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.4
[ 20s] [48/117] cumulate coreutils-6.9-14.3
[ 20s] [49/117] cumulate cpp-9.2.0-1.9
[ 20s] [50/117] cumulate gawk-3.1.5-1.1
[ 20s] [51/117] cumulate gcc-c++-9.2.0-1.9
[ 20s] [52/117] cumulate grep-2.5.2-1.1
[ 20s] [53/117] cumulate libacl-2.2.53-1.7
[ 20s] [54/117] cumulate libelf-0.189-1.8
[ 20s] [55/117] cumulate libgcrypt-1.10.1-1.1
[ 20s] [56/117] cumulate libgfortran-9.2.0-1.9
[ 20s] [57/117] cumulate libmount-2.37.4-15.7
[ 20s] [58/117] cumulate libstdc++-9.2.0-1.9
[ 20s] [59/117] cumulate make-4.3-1.7
[ 20s] [60/117] cumulate nss-certs-3.87-1.8
[ 20s] [61/117] cumulate smack-1.3.1-1.6
[ 20s] [62/117] cumulate bzip2-1.0.8-1.7
[ 20s] [63/117] cumulate libfdisk-2.37.4-15.7
[ 20s] [64/117] cumulate libmagic-5.44-1.6
[ 20s] [65/117] cumulate libxml2-2.10.2-1.8
[ 20s] [66/117] cumulate perl-5.34.0-1.7
[ 20s] [67/117] cumulate xz-5.4.0-1.8
[ 20s] [68/117] cumulate build-mkbaselibs-20120927-1.1
[ 20s] [69/117] cumulate libstdc++-devel-9.2.0-1.9
[ 20s] [70/117] cumulate file-5.44-1.6
[ 20s] [71/117] cumulate linux-glibc-devel-3.10-1.8
[ 20s] [72/117] cumulate tar-1.17-1.1
[ 20s] [73/117] cumulate terminfo-base-full-6.2-1.8
[ 20s] [74/117] cumulate autoconf-2.71-1.8
[ 20s] [75/117] cumulate binutils-2.33.1-1.8
[ 20s] [76/117] cumulate db4-4.8.30.NC-1.8
[ 20s] [77/117] cumulate glibc-locale-2.30-1.8
[ 20s] [78/117] cumulate gzip-1.3.12-1.5
[ 20s] [79/117] cumulate libcc1-9.2.0-1.9
[ 20s] [80/117] cumulate libubsan-9.2.0-1.9
[ 20s] [81/117] cumulate pam-1.1.6-4.3
[ 20s] [82/117] cumulate gettext-runtime-0.21.1-2.9
[ 20s] [83/117] cumulate tzdata-2023c-1.1
[ 20s] [84/117] cumulate libdw-0.189-1.8
[ 20s] [85/117] cumulate libxslt-1.1.37-1.1
[ 20s] [86/117] cumulate libarchive-3.6.2-1.8
[ 20s] [87/117] cumulate glibc-devel-2.30-1.8
[ 20s] [88/117] cumulate automake-1.16.5-1.8
[ 20s] [89/117] cumulate libasm-0.189-1.8
[ 20s] [90/117] cumulate libxslt-tools-1.1.37-1.1
[ 20s] [91/117] cumulate libncurses6-6.2-1.8
[ 20s] [92/117] cumulate build-20120927-1.1
[ 20s] [93/117] cumulate gcc-9.2.0-1.9
[ 20s] [94/117] cumulate libncurses-6.2-1.8
[ 20s] [95/117] cumulate less-608-1.1
[ 20s] [96/117] cumulate libreadline-5.2-1.7
[ 20s] [97/117] cumulate procps-ng-3.3.17-1.1
[ 20s] [98/117] cumulate qemu-accel-x86_64-aarch64-0.4-1.1
[ 20s] [99/117] cumulate libtool-2.4.7-1.8
[ 20s] [100/117] cumulate elfutils-0.189-1.8
[ 20s] [101/117] cumulate libxml2-tools-2.10.2-1.8
[ 20s] [102/117] cumulate python-2.7.18-1.8
[ 20s] [103/117] cumulate python3-base-3.11.2-1.9
[ 20s] [104/117] cumulate util-linux-2.37.4-15.7
[ 20s] [105/117] cumulate util-linux-su-2.37.4-15.7
[ 20s] [106/117] cumulate sgml-skel-0.7.1-1.1
[ 20s] [107/117] cumulate python-libxml2-2.10.2-1.1
[ 20s] [108/117] cumulate gettext-tools-0.21.1-2.9
[ 20s] [109/117] cumulate iso_ent-2000.11.03-1.1
[ 20s] [110/117] cumulate itstool-2.0.7-1.1
[ 20s] [111/117] cumulate xmlcharent-0.3-405.1
[ 20s] [112/117] cumulate docbook_4-4.5-1.1
[ 20s] [113/117] cumulate docbook-xsl-stylesheets-1.79.2-1.1
[ 20s] [114/117] cumulate nss-3.87-1.8
[ 20s] [115/117] cumulate libsoftokn3-3.87-1.8
[ 20s] [116/117] cumulate rpm-4.14.1.1-1.8
[ 20s] [117/117] cumulate rpm-build-4.14.1.1-1.8
[ 20s] now installing cumulated packages
[ 21s] Preparing... ########################################
[ 21s] Updating / installing...
[ 21s] setup-0.9-1.1 ########################################
[ 21s] filesystem-3.1-1.1 ########################################
[ 21s] glibc-2.30-1.8 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig
[ 21s] ########################################
[ 22s] bash-3.2.57-1.1 ########################################
[ 22s] zlib-1.2.13-1.8 ########################################
[ 22s] liblzma-5.4.0-1.8 ########################################
[ 23s] coreutils-6.9-14.3 ########################################
[ 23s] libgcc-9.2.0-1.9 ########################################
[ 23s] libstdc++-9.2.0-1.9 ########################################
[ 23s] libxml2-2.10.2-1.8 ########################################
[ 24s] libbz2-1.0.8-1.7 ########################################
[ 24s] libelf-0.189-1.8 ########################################
[ 24s] libdw-0.189-1.8 ########################################
[ 24s] gawk-3.1.5-1.1 ########################################
[ 24s] libblkid-2.37.4-15.7 ########################################
[ 25s] libopenssl11-1.1.1u-1.8 ########################################
[ 25s] libsqlite-3.40.1-1.7 ########################################
[ 26s] nspr-4.35-1.6 ########################################
[ 26s] sed-4.1c-1.1 ########################################
[ 27s] binutils-2.33.1-1.8 ########################################
[ 27s] pam-1.1.6-4.3 ########################################
[ 27s] gdbm-1.8.3-1.8 ########################################
[ 32s] perl-5.34.0-1.7 ########################################
[ 32s] libcap-2.24-1.6 ########################################
[ 33s] libfreebl3-3.87-1.8 ########################################
[ 33s] libgpg-error-1.46-1.1 ########################################
[ 33s] liblua-5.1.5-1.6 ########################################
[ 33s] libpopt-1.16-1.6 ########################################
[ 34s] libpython-2.7.18-1.8 ########################################
[ 34s] libuuid-2.37.4-15.7 ########################################
[ 34s] libzstd1-1.5.2-1.7 ########################################
[ 35s] libfdisk-2.37.4-15.7 ########################################
[ 35s] libgcrypt-1.10.1-1.1 ########################################
[ 35s] libxslt-1.1.37-1.1 ########################################
[ 35s] build-mkbaselibs-20120927-1.1 ########################################
[ 35s] nss-certs-3.87-1.8 ########################################
[ 35s] libsoftokn3-3.87-1.8 ########################################
[ 36s] nss-3.87-1.8 ########################################
[ 36s] libmount-2.37.4-15.7 ########################################
[ 36s] libasm-0.189-1.8 ########################################
[ 37s] bzip2-1.0.8-1.7 ########################################
[ 37s] db4-4.8.30.NC-1.8 ########################################
[ 37s] libcc1-9.2.0-1.9 ########################################
[ 37s] libubsan-9.2.0-1.9 ########################################
[ 37s] gettext-runtime-0.21.1-2.9 ########################################
[ 38s] libgfortran-9.2.0-1.9 ########################################
[ 38s] linux-glibc-devel-3.10-1.8 ########################################
[ 39s] glibc-devel-2.30-1.8 ########################################
[ 39s] terminfo-base-full-6.2-1.8 ########################################
[ 39s] libncurses6-6.2-1.8 ########################################
[ 39s] libreadline-5.2-1.7 ########################################
[ 40s] libxml2-tools-2.10.2-1.8 ########################################
[ 40s] sgml-skel-0.7.1-1.1 ########################################
[ 41s] python-2.7.18-1.8 ########################################
[ 41s] python-libxml2-2.10.2-1.1 ########################################
[ 41s] iso_ent-2000.11.03-1.1 ########################################
[ 41s] gzip-1.3.12-1.5 ########################################
[ 41s] xz-5.4.0-1.8 ########################################
[ 41s] make-4.3-1.7 ########################################
[ 42s] findutils-4.3.8-1.7 ########################################
[ 42s] libatomic-9.2.0-1.9 ########################################
[ 42s] libattr-2.5.1-1.7 ########################################
[ 42s] libacl-2.2.53-1.7 ########################################
[ 42s] tar-1.17-1.1 ########################################
[ 42s] libarchive-3.6.2-1.8 ########################################
[ 43s] libexpat-2.4.1-1.8 ########################################
[ 43s] libffi-3.4.2-1.8 ########################################
[ 44s] libgomp-9.2.0-1.9 ########################################
[ 44s] libitm-9.2.0-1.9 ########################################
[ 45s] gcc-9.2.0-1.9 ########################################
[ 45s] libltdl-2.4.7-1.8 ########################################
[ 45s] libpcre-8.45-1.1 ########################################
[ 46s] grep-2.5.2-1.1 ########################################
[ 46s] xmlcharent-0.3-405.1 ########################################
[ 46s] docbook_4-4.5-1.1 ########################################
[ 47s] libpython3_111_0-3.11.2-1.9 ########################################
[ 47s] libsmack-1.3.1-1.6 ########################################
[ 48s] libsmartcols-2.37.4-15.7 ########################################
[ 48s] util-linux-2.37.4-15.7 ########################################
[ 49s] m4-1.4.19-1.1 ########################################
[ 49s] autoconf-2.71-1.8 ########################################
[ 49s] automake-1.16.5-1.8 ########################################
[ 49s] patch-2.7.6-1.6 ########################################
[ 49s] libmagic-data-5.44-1.6 ########################################
[ 49s] libmagic-5.44-1.6 ########################################
[ 50s] rpm-4.14.1.1-1.8 ########################################
[ 50s] rpm-build-4.14.1.1-1.8 ########################################
[ 50s] file-5.44-1.6 ########################################
[ 50s] libtool-2.4.7-1.8 ########################################
[ 50s] util-linux-su-2.37.4-15.7 ########################################
[ 50s] smack-1.3.1-1.6 ########################################
[ 51s] python3-base-3.11.2-1.9 ########################################
[ 54s] docbook-xsl-stylesheets-1.79.2-1.1 ########################################
[ 66s] qemu-accel-x86_64-aarch64-0.4-1.1 ########################################
[ 66s] build-20120927-1.1 ########################################
[ 66s] itstool-2.0.7-1.1 ########################################
[ 67s] gettext-tools-0.21.1-2.9 ########################################
[ 67s] libncurses-6.2-1.8 ########################################
[ 67s] less-608-1.1 ########################################
[ 67s] procps-ng-3.3.17-1.1 ########################################
[ 67s] elfutils-0.189-1.8 ########################################
[ 67s] libxslt-tools-1.1.37-1.1 ########################################
[ 67s] libstdc++-devel-9.2.0-1.9 ########################################
[ 68s] glibc-locale-2.30-1.8 ########################################
[ 68s] tzdata-2023c-1.1 ########################################
[ 69s] cpp-9.2.0-1.9 ########################################
[ 70s] gcc-c++-9.2.0-1.9 ########################################
[ 70s] build-compare-2015.04.28-1.3 ########################################
[ 75s] qemu-linux-user-x86_64-cross-5.2.0-20.########################################
[ 76s] cpio-2.8-1.1 ########################################
[ 76s] diffutils-3.8-1.1 ########################################
[ 76s] hostname-3.23-1.1 ########################################
[ 76s] libext2fs-1.46.0-1.7 ########################################
[ 76s] net-tools-2.0_20121208git-1.1 ########################################
[ 76s] pkg-config-0.29.2-1.7 ########################################
[ 76s] update-alternatives-1.21.18-1.1 ########################################
[ 76s] which-2.17-1.1 ########################################
[ 76s] now finalizing build dir...
[ 77s] -----------------------------------------------------------------
[ 77s] I have the following modifications for gtk-doc.spec:
[ 77s] 4c4
[ 77s] < Release: 0
[ 77s] ---
[ 77s] > Release: 1.1
[ 77s] 17c17
[ 77s] < BuildRequires: gettext
[ 77s] ---
[ 77s] > BuildRequires: gettext-tools
[ 77s] build target is aarch64-tizen-linux
[ 77s] -----------------------------------------------------------------
[ 77s] ----- building gtk-doc.spec (user abuild)
[ 77s] -----------------------------------------------------------------
[ 77s] -----------------------------------------------------------------
[ 78s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc' /home/abuild/rpmbuild/SOURCES/gtk-doc.spec
[ 78s] Building target platforms: aarch64-tizen-linux
[ 78s] Building for target aarch64-tizen-linux
[ 78s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bNin78
[ 78s] + umask 022
[ 78s] + cd /home/abuild/rpmbuild/BUILD
[ 78s] + cd /home/abuild/rpmbuild/BUILD
[ 78s] + rm -rf gtk-doc-1.33.2
[ 78s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gtk-doc-1.33.2.tar.xz
[ 78s] + /bin/tar -xof -
[ 78s] + STATUS=0
[ 78s] + '[' 0 -ne 0 ']'
[ 78s] + cd gtk-doc-1.33.2
[ 78s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[ 78s] + exit 0
[ 78s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.xoPrX6
[ 78s] + umask 022
[ 78s] + cd /home/abuild/rpmbuild/BUILD
[ 78s] + cd gtk-doc-1.33.2
[ 78s] ++ uname -m
[ 78s] + [[ aarch64 == \a\a\r\c\h\6\4 ]]
[ 78s] + ref=/usr/lib/rpm
[ 78s] + for s in guess sub
[ 78s] ++ find -maxdepth 8 -name config.guess
[ 78s] + for s in guess sub
[ 78s] ++ find -maxdepth 8 -name config.sub
[ 78s] + LANG=C
[ 78s] + export LANG
[ 78s] + unset DISPLAY
[ 78s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 78s] + export CFLAGS
[ 78s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 78s] + export CXXFLAGS
[ 78s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[ 78s] + export FFLAGS
[ 78s] + LDFLAGS=
[ 78s] + export LDFLAGS
[ 78s] + AR=gcc-ar
[ 78s] + export AR
[ 78s] + NM=/bin/nm
[ 78s] + export NM
[ 78s] + RANLIB=gcc-ranlib
[ 78s] + export RANLIB
[ 78s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 78s] + export CFLAGS
[ 78s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 78s] + export CXXFLAGS
[ 78s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[ 78s] + export FFLAGS
[ 78s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info
[ 78s] autoreconf: export WARNINGS=
[ 78s] autoreconf: Entering directory '.'
[ 78s] autoreconf: configure.ac: not using Gettext
[ 79s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
[ 84s] autoreconf: configure.ac: tracing
[ 86s] autoreconf: configure.ac: creating directory build-aux
[ 86s] autoreconf: running: libtoolize --copy --force
[ 86s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
[ 86s] libtoolize: copying file 'build-aux/ltmain.sh'
[ 86s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
[ 86s] libtoolize: copying file 'm4/libtool.m4'
[ 86s] libtoolize: copying file 'm4/ltoptions.m4'
[ 86s] libtoolize: copying file 'm4/ltsugar.m4'
[ 86s] libtoolize: copying file 'm4/ltversion.m4'
[ 87s] libtoolize: copying file 'm4/lt~obsolete.m4'
[ 87s] autoreconf: configure.ac: not using Intltool
[ 87s] autoreconf: configure.ac: not using Gtkdoc
[ 87s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS}
[ 93s] autoreconf: running: /usr/bin/autoconf --force
[ 95s] autoreconf: configure.ac: not using Autoheader
[ 95s] autoreconf: running: automake --add-missing --copy --force-missing
[ 98s] configure.ac:23: installing 'build-aux/compile'
[ 98s] configure.ac:27: installing 'build-aux/config.guess'
[ 98s] configure.ac:27: installing 'build-aux/config.sub'
[ 98s] configure.ac:14: installing 'build-aux/install-sh'
[ 98s] configure.ac:14: installing 'build-aux/missing'
[ 98s] Makefile.am: installing './INSTALL'
[ 99s] parallel-tests: installing 'build-aux/test-driver'
[ 100s] tests/annotations/src/Makefile.am: installing 'build-aux/depcomp'
[ 103s] autoreconf: Leaving directory '.'
[ 104s] checking for a BSD-compatible install... /bin/install -c
[ 104s] checking whether build environment is sane... yes
[ 104s] checking for a race-free mkdir -p... /bin/mkdir -p
[ 104s] checking for gawk... gawk
[ 104s] checking whether make sets $(MAKE)... yes
[ 104s] checking whether make supports nested variables... yes
[ 104s] checking whether UID '399' is supported by ustar format... yes
[ 104s] checking whether GID '399' is supported by ustar format... yes
[ 104s] checking how to create a ustar tar archive... gnutar
[ 104s] checking whether to enable maintainer-specific portions of Makefiles... yes
[ 104s] checking whether make supports nested variables... (cached) yes
[ 104s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc
[ 104s] checking whether the C compiler works... yes
[ 104s] checking for C compiler default output file name... a.out
[ 104s] checking for suffix of executables...
[ 104s] checking whether we are cross compiling... no
[ 105s] checking for suffix of object files... o
[ 105s] checking whether the compiler supports GNU C... yes
[ 105s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes
[ 105s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed
[ 105s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes
[ 105s] checking whether make supports the include directive... yes (GNU style)
[ 105s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3
[ 105s] checking build system type... aarch64-tizen-linux-gnu
[ 105s] checking host system type... aarch64-tizen-linux-gnu
[ 105s] checking how to print strings... printf
[ 105s] checking for a sed that does not truncate output... /bin/sed
[ 105s] checking for grep that handles long lines and -e... /bin/grep
[ 105s] checking for egrep... /bin/grep -E
[ 105s] checking for fgrep... /bin/grep -F
[ 105s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld
[ 105s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes
[ 105s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm
[ 105s] checking the name lister (/bin/nm) interface... BSD nm
[ 105s] checking whether ln -s works... yes
[ 105s] checking the maximum length of command line arguments... 1572864
[ 105s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop
[ 105s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop
[ 105s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r
[ 105s] checking for aarch64-tizen-linux-gnu-file... no
[ 105s] checking for file... file
[ 105s] checking for aarch64-tizen-linux-gnu-objdump... no
[ 105s] checking for objdump... objdump
[ 105s] checking how to recognize dependent libraries... pass_all
[ 105s] checking for aarch64-tizen-linux-gnu-dlltool... no
[ 105s] checking for dlltool... no
[ 105s] checking how to associate runtime and link libraries... printf %s\n
[ 105s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar
[ 106s] checking for archiver @FILE support... @
[ 106s] checking for aarch64-tizen-linux-gnu-strip... no
[ 106s] checking for strip... strip
[ 106s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib
[ 106s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok
[ 106s] checking for sysroot... no
[ 106s] checking for a working dd... /bin/dd
[ 106s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1
[ 106s] checking for aarch64-tizen-linux-gnu-mt... no
[ 106s] checking for mt... no
[ 106s] checking if : is a manifest tool... no
[ 106s] checking for stdio.h... yes
[ 106s] checking for stdlib.h... yes
[ 106s] checking for string.h... yes
[ 106s] checking for inttypes.h... yes
[ 106s] checking for stdint.h... yes
[ 106s] checking for strings.h... yes
[ 106s] checking for sys/stat.h... yes
[ 106s] checking for sys/types.h... yes
[ 106s] checking for unistd.h... yes
[ 107s] checking for dlfcn.h... yes
[ 107s] checking for objdir... .libs
[ 107s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
[ 107s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
[ 107s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
[ 107s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no
[ 107s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes
[ 107s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes
[ 107s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes
[ 107s] checking whether -lc should be explicitly linked in... no
[ 107s] checking dynamic linker characteristics... GNU/Linux ld.so
[ 107s] checking how to hardcode library paths into programs... immediate
[ 107s] checking whether stripping libraries is possible... yes
[ 107s] checking if libtool supports shared libraries... yes
[ 107s] checking whether to build shared libraries... yes
[ 107s] checking whether to build static libraries... yes
[ 107s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config
[ 107s] checking pkg-config is at least version 0.19... yes
[ 108s] checking for a Python interpreter with version >= 3.2... python3
[ 108s] checking for python3... /bin/python3
[ 109s] checking for python3 version... 3.11
[ 109s] checking for python3 platform... linux
[ 109s] checking for GNU default python3 prefix... ${prefix}
[ 109s] checking for GNU default python3 exec_prefix... ${exec_prefix}
[ 109s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages
[ 110s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages
[ 110s] checking for xsltproc... /bin/xsltproc
[ 110s] checking for dblatex... no
[ 110s] checking for fop... no
[ 110s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml
[ 110s] checking for XML catalog... /etc/xml/catalog
[ 110s] checking for xmlcatalog... /bin/xmlcatalog
[ 110s] checking for DocBook XML DTD V4.3 in XML catalog... found
[ 110s] checking for DocBook XSL Stylesheets in XML catalog... found
[ 110s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no
[ 110s] checking whether to enable runtime debugging code... no
[ 110s] checking whether date can output nanoseconds... yes
[ 110s] checking whether date can format dates... yes
[ 110s] checking for yelp-tools... no
[ 110s] checking python3 module: "pygments"... no
[ 111s] checking that generated files are newer than configure... done
[ 111s] configure: creating ./config.status
[ 111s] config.status: creating Makefile
[ 111s] config.status: creating gtk-doc.pc
[ 111s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting
[ 111s] config.status: creating buildsystems/autotools/Makefile
[ 111s] config.status: creating buildsystems/cmake/Makefile
[ 111s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake
[ 111s] config.status: creating gtkdoc/config_data.py
[ 111s] config.status: creating help/Makefile
[ 111s] config.status: creating help/manual/Makefile
[ 112s] config.status: creating tests/Makefile
[ 112s] config.status: creating tests/annotations/Makefile
[ 112s] config.status: creating tests/annotations/src/Makefile
[ 112s] config.status: creating tests/annotations/docs/Makefile
[ 112s] config.status: creating tests/bugs/Makefile
[ 112s] config.status: creating tests/bugs/src/Makefile
[ 112s] config.status: creating tests/bugs/docs/Makefile
[ 112s] config.status: creating tests/empty/Makefile
[ 112s] config.status: creating tests/empty/src/Makefile
[ 112s] config.status: creating tests/empty/docs/Makefile
[ 112s] config.status: creating tests/fail/Makefile
[ 112s] config.status: creating tests/fail/src/Makefile
[ 112s] config.status: creating tests/fail/docs/Makefile
[ 112s] config.status: creating tests/gobject/Makefile
[ 112s] config.status: creating tests/gobject/src/Makefile
[ 113s] config.status: creating tests/gobject/docs/Makefile
[ 113s] config.status: creating tests/program/Makefile
[ 113s] config.status: creating tests/program/src/Makefile
[ 113s] config.status: creating tests/program/docs/Makefile
[ 113s] config.status: creating tests/repro/Makefile
[ 113s] config.status: creating tests/repro/src/Makefile
[ 113s] config.status: creating tests/repro/docs/Makefile
[ 113s] config.status: creating gtkdoc-check
[ 113s] config.status: creating gtkdoc-depscan
[ 113s] config.status: creating gtkdoc-fixxref
[ 113s] config.status: creating gtkdoc-mkdb
[ 113s] config.status: creating gtkdoc-mkhtml
[ 113s] config.status: creating gtkdoc-mkhtml2
[ 113s] config.status: creating gtkdoc-mkman
[ 113s] config.status: creating gtkdoc-mkpdf
[ 113s] config.status: creating gtkdoc-rebase
[ 113s] config.status: creating gtkdoc-scan
[ 114s] config.status: creating gtkdoc-scangobj
[ 114s] config.status: creating buildsystems/autotools/gtkdocize
[ 114s] config.status: creating tests/tools.sh
[ 114s] config.status: executing depfiles commands
[ 115s] config.status: executing libtool commands
[ 115s] configure:
[ 115s] gtk-doc was configured with the following options:
[ 115s] ==================================================
[ 115s] configure: PDF support disabled, no dblatex or fop available
[ 115s] configure: Skipping regression tests
[ 115s] configure: Debug tracing disabled
[ 115s] configure: Documentation disabled
[ 115s] + AR=gcc-ar
[ 115s] + export AR
[ 115s] + NM=/bin/nm
[ 115s] + export NM
[ 115s] + RANLIB=gcc-ranlib
[ 115s] + export RANLIB
[ 115s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 115s] + export CFLAGS
[ 115s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[ 115s] + export CXXFLAGS
[ 115s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[ 115s] + export FFLAGS
[ 115s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-scrollkeeper
[ 115s] configure: WARNING: unrecognized options: --disable-scrollkeeper
[ 115s] checking for a BSD-compatible install... /bin/install -c
[ 115s] checking whether build environment is sane... yes
[ 115s] checking for a race-free mkdir -p... /bin/mkdir -p
[ 115s] checking for gawk... gawk
[ 115s] checking whether make sets $(MAKE)... yes
[ 115s] checking whether make supports nested variables... yes
[ 115s] checking whether UID '399' is supported by ustar format... yes
[ 115s] checking whether GID '399' is supported by ustar format... yes
[ 115s] checking how to create a ustar tar archive... gnutar
[ 115s] checking whether to enable maintainer-specific portions of Makefiles... yes
[ 115s] checking whether make supports nested variables... (cached) yes
[ 115s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc
[ 116s] checking whether the C compiler works... yes
[ 116s] checking for C compiler default output file name... a.out
[ 116s] checking for suffix of executables...
[ 116s] checking whether we are cross compiling... no
[ 116s] checking for suffix of object files... o
[ 116s] checking whether the compiler supports GNU C... yes
[ 116s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes
[ 116s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed
[ 116s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes
[ 116s] checking whether make supports the include directive... yes (GNU style)
[ 116s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3
[ 116s] checking build system type... aarch64-tizen-linux-gnu
[ 116s] checking host system type... aarch64-tizen-linux-gnu
[ 116s] checking how to print strings... printf
[ 116s] checking for a sed that does not truncate output... /bin/sed
[ 116s] checking for grep that handles long lines and -e... /bin/grep
[ 116s] checking for egrep... /bin/grep -E
[ 116s] checking for fgrep... /bin/grep -F
[ 117s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld
[ 117s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes
[ 117s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm
[ 117s] checking the name lister (/bin/nm) interface... BSD nm
[ 117s] checking whether ln -s works... yes
[ 117s] checking the maximum length of command line arguments... 1572864
[ 117s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop
[ 117s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop
[ 117s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r
[ 117s] checking for aarch64-tizen-linux-gnu-file... no
[ 117s] checking for file... file
[ 117s] checking for aarch64-tizen-linux-gnu-objdump... no
[ 117s] checking for objdump... objdump
[ 117s] checking how to recognize dependent libraries... pass_all
[ 117s] checking for aarch64-tizen-linux-gnu-dlltool... no
[ 117s] checking for dlltool... no
[ 117s] checking how to associate runtime and link libraries... printf %s\n
[ 117s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar
[ 117s] checking for archiver @FILE support... @
[ 117s] checking for aarch64-tizen-linux-gnu-strip... no
[ 117s] checking for strip... strip
[ 117s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib
[ 117s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok
[ 117s] checking for sysroot... no
[ 117s] checking for a working dd... /bin/dd
[ 117s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1
[ 117s] checking for aarch64-tizen-linux-gnu-mt... no
[ 117s] checking for mt... no
[ 117s] checking if : is a manifest tool... no
[ 117s] checking for stdio.h... yes
[ 117s] checking for stdlib.h... yes
[ 117s] checking for string.h... yes
[ 117s] checking for inttypes.h... yes
[ 117s] checking for stdint.h... yes
[ 117s] checking for strings.h... yes
[ 117s] checking for sys/stat.h... yes
[ 117s] checking for sys/types.h... yes
[ 118s] checking for unistd.h... yes
[ 118s] checking for dlfcn.h... yes
[ 118s] checking for objdir... .libs
[ 118s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
[ 118s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
[ 118s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
[ 118s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no
[ 118s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes
[ 118s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes
[ 118s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes
[ 118s] checking whether -lc should be explicitly linked in... no
[ 118s] checking dynamic linker characteristics... GNU/Linux ld.so
[ 118s] checking how to hardcode library paths into programs... immediate
[ 118s] checking whether stripping libraries is possible... yes
[ 118s] checking if libtool supports shared libraries... yes
[ 118s] checking whether to build shared libraries... yes
[ 118s] checking whether to build static libraries... yes
[ 118s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config
[ 118s] checking pkg-config is at least version 0.19... yes
[ 119s] checking for a Python interpreter with version >= 3.2... python3
[ 119s] checking for python3... /bin/python3
[ 119s] checking for python3 version... 3.11
[ 120s] checking for python3 platform... linux
[ 120s] checking for GNU default python3 prefix... ${prefix}
[ 120s] checking for GNU default python3 exec_prefix... ${exec_prefix}
[ 120s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages
[ 120s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages
[ 120s] checking for xsltproc... /bin/xsltproc
[ 120s] checking for dblatex... no
[ 120s] checking for fop... no
[ 120s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml
[ 120s] checking for XML catalog... /etc/xml/catalog
[ 120s] checking for xmlcatalog... /bin/xmlcatalog
[ 120s] checking for DocBook XML DTD V4.3 in XML catalog... found
[ 120s] checking for DocBook XSL Stylesheets in XML catalog... found
[ 121s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no
[ 121s] checking whether to enable runtime debugging code... no
[ 121s] checking whether date can output nanoseconds... yes
[ 121s] checking whether date can format dates... yes
[ 121s] checking for yelp-tools... no
[ 121s] checking python3 module: "pygments"... no
[ 121s] checking that generated files are newer than configure... done
[ 121s] configure: creating ./config.status
[ 122s] config.status: creating Makefile
[ 122s] config.status: creating gtk-doc.pc
[ 122s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting
[ 122s] config.status: creating buildsystems/autotools/Makefile
[ 122s] config.status: creating buildsystems/cmake/Makefile
[ 122s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake
[ 122s] config.status: creating gtkdoc/config_data.py
[ 122s] config.status: creating help/Makefile
[ 122s] config.status: creating help/manual/Makefile
[ 122s] config.status: creating tests/Makefile
[ 122s] config.status: creating tests/annotations/Makefile
[ 122s] config.status: creating tests/annotations/src/Makefile
[ 122s] config.status: creating tests/annotations/docs/Makefile
[ 122s] config.status: creating tests/bugs/Makefile
[ 122s] config.status: creating tests/bugs/src/Makefile
[ 122s] config.status: creating tests/bugs/docs/Makefile
[ 122s] config.status: creating tests/empty/Makefile
[ 122s] config.status: creating tests/empty/src/Makefile
[ 123s] config.status: creating tests/empty/docs/Makefile
[ 123s] config.status: creating tests/fail/Makefile
[ 123s] config.status: creating tests/fail/src/Makefile
[ 123s] config.status: creating tests/fail/docs/Makefile
[ 123s] config.status: creating tests/gobject/Makefile
[ 123s] config.status: creating tests/gobject/src/Makefile
[ 123s] config.status: creating tests/gobject/docs/Makefile
[ 123s] config.status: creating tests/program/Makefile
[ 123s] config.status: creating tests/program/src/Makefile
[ 123s] config.status: creating tests/program/docs/Makefile
[ 123s] config.status: creating tests/repro/Makefile
[ 123s] config.status: creating tests/repro/src/Makefile
[ 123s] config.status: creating tests/repro/docs/Makefile
[ 123s] config.status: creating gtkdoc-check
[ 123s] config.status: creating gtkdoc-depscan
[ 123s] config.status: creating gtkdoc-fixxref
[ 123s] config.status: creating gtkdoc-mkdb
[ 123s] config.status: creating gtkdoc-mkhtml
[ 124s] config.status: creating gtkdoc-mkhtml2
[ 124s] config.status: creating gtkdoc-mkman
[ 124s] config.status: creating gtkdoc-mkpdf
[ 124s] config.status: creating gtkdoc-rebase
[ 124s] config.status: creating gtkdoc-scan
[ 124s] config.status: creating gtkdoc-scangobj
[ 124s] config.status: creating buildsystems/autotools/gtkdocize
[ 124s] config.status: creating tests/tools.sh
[ 124s] config.status: executing depfiles commands
[ 125s] config.status: executing libtool commands
[ 125s] configure: WARNING: unrecognized options: --disable-scrollkeeper
[ 125s] configure:
[ 125s] gtk-doc was configured with the following options:
[ 125s] ==================================================
[ 125s] configure: PDF support disabled, no dblatex or fop available
[ 125s] configure: Skipping regression tests
[ 125s] configure: Debug tracing disabled
[ 125s] configure: Documentation disabled
[ 125s] + /bin/make -j12
[ 125s] git.mk: Generating .gitignore
[ 125s] Making all in buildsystems/autotools
[ 125s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 125s] Making all in buildsystems/cmake
[ 125s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 125s] Making all in help
[ 125s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 125s] make[2]: Nothing to be done for 'all-am'.
[ 125s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 125s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual'
[ 125s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 125s] Making all in tests
[ 125s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations'
[ 125s] git.mk: Generating .gitignore
[ 125s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 125s] make[2]: Nothing to be done for 'all-am'.
[ 125s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 125s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src'
[ 125s] git.mk: Generating .gitignore
[ 126s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src'
[ 126s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs'
[ 126s] git.mk: Generating .gitignore
[ 127s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs'
[ 127s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations'
[ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs'
[ 127s] git.mk: Generating .gitignore
[ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src'
[ 127s] git.mk: Generating .gitignore
[ 127s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src'
[ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs'
[ 127s] git.mk: Generating .gitignore
[ 127s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs'
[ 127s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs'
[ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty'
[ 127s] git.mk: Generating .gitignore
[ 127s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src'
[ 127s] git.mk: Generating .gitignore
[ 128s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src'
[ 128s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs'
[ 128s] make[3]: warning: -j1 forced in makefile: resetting jobserver mode.
[ 128s] git.mk: Generating .gitignore
[ 129s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs'
[ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty'
[ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail'
[ 129s] git.mk: Generating .gitignore
[ 129s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src'
[ 129s] git.mk: Generating .gitignore
[ 129s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src'
[ 129s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs'
[ 129s] git.mk: Generating .gitignore
[ 130s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs'
[ 130s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail'
[ 130s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject'
[ 130s] git.mk: Generating .gitignore
[ 130s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src'
[ 130s] git.mk: Generating .gitignore
[ 130s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src'
[ 130s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs'
[ 130s] git.mk: Generating .gitignore
[ 131s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs'
[ 131s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject'
[ 131s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program'
[ 131s] git.mk: Generating .gitignore
[ 131s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src'
[ 131s] git.mk: Generating .gitignore
[ 131s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src'
[ 131s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs'
[ 131s] git.mk: Generating .gitignore
[ 131s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs'
[ 131s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program'
[ 131s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro'
[ 131s] git.mk: Generating .gitignore
[ 131s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src'
[ 131s] git.mk: Generating .gitignore
[ 132s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src'
[ 132s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs'
[ 132s] git.mk: Generating .gitignore
[ 133s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] make[1]: Nothing to be done for 'all-am'.
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] + exit 0
[ 133s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.OlVbS5
[ 133s] + umask 022
[ 133s] + cd /home/abuild/rpmbuild/BUILD
[ 133s] + cd gtk-doc-1.33.2
[ 133s] + LANG=C
[ 133s] + export LANG
[ 133s] + unset DISPLAY
[ 133s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64
[ 133s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64
[ 133s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64 install
[ 133s] Making install in buildsystems/autotools
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/bin'
[ 133s] /bin/install -c gtkdocize '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/bin'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/aclocal'
[ 133s] /bin/install -c -m 644 gtk-doc.m4 '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/aclocal'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/data'
[ 133s] /bin/install -c -m 644 gtk-doc.make gtk-doc.flat.make gtk-doc.no-xslt.make gtk-doc.no-xslt-flat.make '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/data'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools'
[ 133s] Making install in buildsystems/cmake
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 133s] make[2]: Nothing to be done for 'install-exec-am'.
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/cmake/GtkDoc'
[ 133s] /bin/install -c -m 644 GtkDocConfig.cmake GtkDocConfigVersion.cmake GtkDocScanGObjWrapper.cmake '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/cmake/GtkDoc'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake'
[ 133s] Making install in help
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] make[3]: Nothing to be done for 'install-exec-am'.
[ 133s] make[3]: Nothing to be done for 'install-data-am'.
[ 133s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help'
[ 133s] Making install in tests
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[3]: Nothing to be done for 'install-exec-am'.
[ 133s] make[3]: Nothing to be done for 'install-data-am'.
[ 133s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests'
[ 133s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/bin'
[ 133s] /bin/install -c gtkdoc-check gtkdoc-depscan gtkdoc-fixxref gtkdoc-mkdb gtkdoc-mkhtml gtkdoc-mkhtml2 gtkdoc-mkman gtkdoc-mkpdf gtkdoc-rebase gtkdoc-scan gtkdoc-scangobj '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/bin'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/data'
[ 133s] /bin/install -c -m 644 gtk-doc.xsl version-greater-or-equal.xsl devhelp2.xsd devhelp2.xsl style/home.png style/left.png style/left-insensitive.png style/right.png style/right-insensitive.png style/up.png style/up-insensitive.png style/style.css '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/data'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/pkgconfig'
[ 133s] /bin/install -c -m 644 gtk-doc.pc '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/pkgconfig'
[ 133s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/python/gtkdoc'
[ 133s] /bin/install -c -m 644 gtkdoc/__init__.py gtkdoc/check.py gtkdoc/common.py gtkdoc/config.py gtkdoc/config_data.py gtkdoc/fixxref.py gtkdoc/highlight.py gtkdoc/md_to_db.py gtkdoc/mkdb.py gtkdoc/mkhtml.py gtkdoc/mkhtml2.py gtkdoc/mkman.py gtkdoc/mkpdf.py gtkdoc/rebase.py gtkdoc/scan.py gtkdoc/scangobj.py '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/gtk-doc/python/gtkdoc'
[ 133s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2'
[ 133s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/info/dir
[ 133s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64 -regex '.*\.la$'
[ 133s] + xargs rm -f --
[ 133s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64 -regex '.*\.a$'
[ 133s] + xargs rm -f --
[ 133s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/help
[ 133s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.33.2-1.1 --unique-debug-src-base gtk-doc-1.33.2-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2
[ 134s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debuginfo.manifest
[ 134s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debugsource.manifest
[ 134s] + /usr/lib/rpm/check-buildroot
[ 134s] + /usr/lib/rpm//brp-compress
[ 134s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[ 134s] + /usr/lib/rpm/brp-python-hardlink
[ 134s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64
[ 134s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/isu.list
[ 134s] ~/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64 ~/rpmbuild/BUILD/gtk-doc-1.33.2
[ 134s] ~/rpmbuild/BUILD/gtk-doc-1.33.2
[ 134s] Processing files: gtk-doc-1.33.2-1.1.aarch64
[ 134s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.8sD3X8
[ 134s] + umask 022
[ 134s] + cd /home/abuild/rpmbuild/BUILD
[ 134s] + cd gtk-doc-1.33.2
[ 134s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/licenses/gtk-doc
[ 134s] + export LC_ALL=C
[ 134s] + LC_ALL=C
[ 134s] + export LICENSEDIR
[ 134s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/licenses/gtk-doc
[ 134s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64/usr/share/licenses/gtk-doc
[ 134s] + exit 0
[ 135s] Provides: gtk-doc = 1.33.2-1.1 gtk-doc(aarch-64) = 1.33.2-1.1 pkgconfig(gtk-doc) = 1.33.1
[ 135s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[ 135s] Requires: /bin/python3 /bin/sh /usr/bin/pkg-config
[ 135s] Processing files: gtk-doc-debugsource-1.33.2-1.1.aarch64
[ 135s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/debugsourcefiles.list
[ 135s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[ 135s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[ 135s]
[ 135s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64
[ 135s] Wrote: /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.1.src.rpm
[ 136s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-1.33.2-1.1.aarch64.rpm
[ 136s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-debugsource-1.33.2-1.1.aarch64.rpm
[ 136s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.6W6T05
[ 136s] + umask 022
[ 136s] + cd /home/abuild/rpmbuild/BUILD
[ 136s] + cd gtk-doc-1.33.2
[ 136s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.1.aarch64
[ 136s] + exit 0
[ 136s] ... checking for files with abuild user/group
[ 136s] ... creating baselibs
[ 136s]
[ 136s] 75bee4a44dbd finished "build gtk-doc.spec" at Thu Jul 13 17:53:34 UTC 2023.
[ 136s]
Retried build at Thu Jul 13 19:47:33 2023 returned same result, skipped
Retried build at Wed Aug 2 05:22:55 2023 returned same result, skipped
Retried build at Wed Aug 2 15:35:01 2023 returned same result, skipped
Retried build at Thu Sep 14 00:09:46 2023 returned same result, skipped
Retried build at Thu Oct 12 12:13:34 2023 returned same result, skipped
Retried build at Mon Oct 30 07:44:43 2023 returned same result, skipped
Retried build at Fri Nov 3 01:34:18 2023 returned same result, skipped
Retried build at Mon Nov 6 10:59:01 2023 returned same result, skipped
Retried build at Tue Dec 12 10:59:31 2023 returned same result, skipped
Retried build at Wed Dec 13 06:51:03 2023 returned same result, skipped
Retried build at Thu Jan 4 10:15:43 2024 returned same result, skipped
Retried build at Sat Jan 6 14:40:51 2024 returned same result, skipped
Retried build at Tue Jan 23 13:36:19 2024 returned same result, skipped
Retried build at Thu Jan 25 04:21:05 2024 returned same result, skipped
Retried build at Thu Feb 15 07:09:40 2024 returned same result, skipped
Retried build at Wed Feb 21 00:11:28 2024 returned same result, skipped
Retried build at Fri Feb 23 00:17:33 2024 returned same result, skipped
Retried build at Sun Feb 25 16:08:58 2024 returned same result, skipped
Retried build at Thu Mar 7 00:43:12 2024 returned same result, skipped
Retried build at Mon Mar 11 11:50:01 2024 returned same result, skipped
Retried build at Tue Mar 12 01:10:38 2024 returned same result, skipped
Retried build at Mon Mar 18 12:29:33 2024 returned same result, skipped
Retried build at Mon Mar 25 10:52:17 2024 returned same result, skipped
Retried build at Fri Mar 29 05:00:47 2024 returned same result, skipped
Retried build at Fri Apr 5 01:15:26 2024 returned same result, skipped
Retried build at Mon Apr 15 01:47:35 2024 returned same result, skipped
Retried build at Thu May 16 11:32:37 2024 returned same result, skipped
Retried build at Thu May 30 04:15:41 2024 returned same result, skipped
Retried build at Wed Jun 12 02:45:16 2024 returned same result, skipped
Retried build at Wed Jul 3 03:52:14 2024 returned same result, skipped
Retried build at Wed Jul 10 08:14:04 2024 returned same result, skipped
Retried build at Wed Jul 24 00:50:02 2024 returned same result, skipped
Retried build at Thu Jul 25 09:24:32 2024 returned same result, skipped
Retried build at Mon Aug 5 00:34:42 2024 returned same result, skipped
Retried build at Wed Aug 21 10:31:08 2024 returned same result, skipped
Retried build at Fri Aug 23 00:42:38 2024 returned same result, skipped