[    0s] on X86_64, no limit mem size
[    0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19
[    0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l
[    0s] 
[    0s] 
[    0s] 387f6708f267 started "build libpciaccess.spec" at Thu Nov 23 04:25:02 UTC 2023.
[    0s] 
[    0s] Building libpciaccess for project 'Tizen-Base' repository 'standard' arch 'aarch64' srcmd5 '7325d11798514e0e18cf29ffc56035ff'
[    0s] 
[    0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/libpciaccess.spec ...
[    0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/libpciaccess.spec
[    0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/19/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/libpciaccess.spec build ...
[    0s] registering binfmt handlers for cross build
[    0s] sh: 1: /sbin/modprobe: not found
[    0s] cycle: nss -> libsoftokn3
[    0s]   breaking dependency nss -> libsoftokn3
[    0s] [1/41] preinstalling libmagic-data...
[    2s] [2/41] preinstalling libncurses...
[    2s] [3/41] preinstalling setup...
[    2s] [4/41] preinstalling filesystem...
[    2s] [5/41] preinstalling glibc...
[    2s] [6/41] preinstalling bash...
[    2s] [7/41] preinstalling diffutils...
[    2s] [8/41] preinstalling grep...
[    2s] [9/41] preinstalling libattr...
[    2s] [10/41] preinstalling libblkid...
[    2s] [11/41] preinstalling libbz2...
[    2s] [12/41] preinstalling libcap...
[    2s] [13/41] preinstalling libfreebl3...
[    2s] [14/41] preinstalling libgcc...
[    2s] [15/41] preinstalling liblua...
[    2s] [16/41] preinstalling liblzma...
[    2s] [17/41] preinstalling libpopt...
[    2s] [18/41] preinstalling libreadline...
[    2s] [19/41] preinstalling libsmack...
[    2s] [20/41] preinstalling libsqlite...
[    2s] [21/41] preinstalling libuuid...
[    2s] [22/41] preinstalling libzstd1...
[    2s] [23/41] preinstalling nspr...
[    2s] [24/41] preinstalling sed...
[    2s] [25/41] preinstalling zlib...
[    2s] [26/41] preinstalling qemu-accel-x86_64-aarch64...
[   10s] [27/41] preinstalling qemu-linux-user-x86_64-cross...
[   12s] [28/41] preinstalling coreutils...
[   12s] [29/41] preinstalling libacl...
[   12s] [30/41] preinstalling libelf...
[   12s] [31/41] preinstalling libmount...
[   12s] [32/41] preinstalling smack...
[   12s] [33/41] preinstalling bzip2...
[   12s] [34/41] preinstalling libmagic...
[   12s] [35/41] preinstalling libxml2...
[   12s] [36/41] preinstalling tar...
[   12s] [37/41] preinstalling util-linux...
[   12s] [38/41] preinstalling util-linux-su...
[   12s] [39/41] preinstalling nss...
[   12s] [40/41] preinstalling libsoftokn3...
[   13s] [41/41] preinstalling rpm...
[   13s] running qemu-linux-user-x86_64-cross postinstall script
[   13s] running qemu-accel-x86_64-aarch64 postinstall script
[   13s] running setup postinstall script
[   13s] chroot: failed to run command '<lua>': No such file or directory
[   13s] initializing rpm db...
[   13s] reordering...cycle: libsoftokn3 -> nss
[   13s]   breaking dependency nss -> libsoftokn3
[   13s] done
[   13s] querying package ids...
[   14s] [1/98] cumulate libmagic-data-5.44-1.18
[   14s] [2/98] cumulate setup-0.9-1.7
[   14s] [3/98] cumulate filesystem-3.1-1.1
[   14s] [4/98] cumulate glibc-2.30-1.24
[   14s] [5/98] cumulate bash-3.2.57-1.1
[   14s] [6/98] cumulate cpio-2.8-1.1
[   14s] [7/98] cumulate diffutils-3.8-1.1
[   14s] [8/98] cumulate findutils-4.3.8-1.21
[   14s] [9/98] cumulate gdbm-1.8.3-1.24
[   14s] [10/98] cumulate hostname-3.23-1.1
[   14s] [11/98] cumulate libatomic-9.2.0-1.25
[   14s] [12/98] cumulate libattr-2.5.1-1.21
[   14s] [13/98] cumulate libblkid-2.37.4-2.1
[   14s] [14/98] cumulate libbz2-1.0.8-1.21
[   14s] [15/98] cumulate libcap-2.24-1.18
[   14s] [16/98] cumulate libext2fs-1.46.0-1.22
[   14s] [17/98] cumulate libfreebl3-3.87-1.24
[   14s] [18/98] cumulate libgcc-9.2.0-1.25
[   14s] [19/98] cumulate libgomp-9.2.0-1.25
[   14s] [20/98] cumulate libitm-9.2.0-1.25
[   14s] [21/98] cumulate libltdl-2.4.7-1.24
[   14s] [22/98] cumulate liblua-5.1.5-1.19
[   14s] [23/98] cumulate liblzma-5.4.0-1.24
[   14s] [24/98] cumulate libopenssl3-3.0.9-4.8
[   14s] [25/98] cumulate libpcre-8.45-1.8
[   14s] [26/98] cumulate libpopt-1.16-1.19
[   14s] [27/98] cumulate libsmack-1.3.1-1.18
[   14s] [28/98] cumulate libsmartcols-2.37.4-2.1
[   14s] [29/98] cumulate libsqlite-3.40.1-1.21
[   14s] [30/98] cumulate libuuid-2.37.4-2.1
[   14s] [31/98] cumulate libzstd1-1.5.2-1.23
[   14s] [32/98] cumulate m4-1.4.19-1.1
[   14s] [33/98] cumulate net-tools-2.0_20121208git-2.1
[   14s] [34/98] cumulate nspr-4.35-1.19
[   14s] [35/98] cumulate patch-2.7.6-1.18
[   14s] [36/98] cumulate pkg-config-0.29.2-1.21
[   14s] [37/98] cumulate sed-4.1c-1.1
[   14s] [38/98] cumulate update-alternatives-1.21.18-1.1
[   14s] [39/98] cumulate which-2.17-1.1
[   14s] [40/98] cumulate zlib-1.2.13-2.4
[   14s] [41/98] cumulate build-compare-2015.04.28-1.13
[   14s] [42/98] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.13
[   14s] [43/98] cumulate util-macros-1.19.0-1.1
[   14s] [44/98] cumulate coreutils-6.9-14.12
[   14s] [45/98] cumulate cpp-9.2.0-1.25
[   14s] [46/98] cumulate gawk-3.1.5-1.1
[   14s] [47/98] cumulate gcc-c++-9.2.0-1.25
[   14s] [48/98] cumulate grep-2.5.2-1.1
[   14s] [49/98] cumulate libacl-2.2.53-1.21
[   14s] [50/98] cumulate libelf-0.189-1.24
[   14s] [51/98] cumulate libgfortran-9.2.0-1.25
[   14s] [52/98] cumulate libmount-2.37.4-2.1
[   14s] [53/98] cumulate libstdc++-9.2.0-1.25
[   14s] [54/98] cumulate make-4.3-1.20
[   14s] [55/98] cumulate nss-certs-3.87-1.24
[   14s] [56/98] cumulate smack-1.3.1-1.18
[   14s] [57/98] cumulate bzip2-1.0.8-1.21
[   14s] [58/98] cumulate libfdisk-2.37.4-2.1
[   14s] [59/98] cumulate libmagic-5.44-1.18
[   14s] [60/98] cumulate libxml2-2.10.2-1.24
[   14s] [61/98] cumulate perl-5.34.0-1.21
[   14s] [62/98] cumulate xz-5.4.0-1.24
[   14s] [63/98] cumulate build-mkbaselibs-20120927-1.1
[   14s] [64/98] cumulate libstdc++-devel-9.2.0-1.25
[   14s] [65/98] cumulate file-5.44-1.18
[   14s] [66/98] cumulate linux-glibc-devel-5.4-1.2
[   14s] [67/98] cumulate tar-1.17-1.1
[   14s] [68/98] cumulate terminfo-base-full-6.4-1.7
[   14s] [69/98] cumulate autoconf-2.71-1.24
[   14s] [70/98] cumulate binutils-2.33.1-1.24
[   14s] [71/98] cumulate glibc-locale-2.30-1.24
[   14s] [72/98] cumulate gzip-1.3.12-1.17
[   14s] [73/98] cumulate libcc1-9.2.0-1.25
[   14s] [74/98] cumulate libubsan-9.2.0-1.25
[   14s] [75/98] cumulate pam-1.1.6-1.1
[   14s] [76/98] cumulate tzdata-2023c-1.1
[   14s] [77/98] cumulate libdw-0.189-1.24
[   14s] [78/98] cumulate libarchive-3.6.2-4.7
[   14s] [79/98] cumulate glibc-devel-2.30-1.24
[   14s] [80/98] cumulate automake-1.16.5-1.24
[   14s] [81/98] cumulate libasm-0.189-1.24
[   14s] [82/98] cumulate libncurses6-6.4-1.7
[   14s] [83/98] cumulate build-20120927-1.1
[   14s] [84/98] cumulate gcc-9.2.0-1.25
[   14s] [85/98] cumulate libncurses-6.4-1.7
[   14s] [86/98] cumulate less-608-1.1
[   14s] [87/98] cumulate libreadline-5.2-1.21
[   14s] [88/98] cumulate procps-ng-3.3.17-1.2
[   14s] [89/98] cumulate qemu-accel-x86_64-aarch64-0.4-2.5
[   14s] [90/98] cumulate zlib-devel-1.2.13-2.4
[   14s] [91/98] cumulate libtool-2.4.7-1.24
[   14s] [92/98] cumulate elfutils-0.189-1.24
[   14s] [93/98] cumulate util-linux-2.37.4-2.1
[   14s] [94/98] cumulate util-linux-su-2.37.4-2.1
[   14s] [95/98] cumulate nss-3.87-1.24
[   14s] [96/98] cumulate libsoftokn3-3.87-1.24
[   14s] [97/98] cumulate rpm-4.14.1.1-2.3
[   14s] [98/98] cumulate rpm-build-4.14.1.1-2.3
[   14s] now installing cumulated packages
[   14s] Preparing...                          ########################################
[   14s] Updating / installing...
[   14s] setup-0.9-1.7                         ########################################
[   14s] filesystem-3.1-1.1                    ########################################
[   14s] glibc-2.30-1.24                       warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig
[   15s] ########################################
[   15s] bash-3.2.57-1.1                       ########################################
[   15s] zlib-1.2.13-2.4                       ########################################
[   16s] coreutils-6.9-14.12                   ########################################
[   16s] libgcc-9.2.0-1.25                     ########################################
[   16s] libstdc++-9.2.0-1.25                  ########################################
[   16s] libbz2-1.0.8-1.21                     ########################################
[   17s] liblzma-5.4.0-1.24                    ########################################
[   17s] libelf-0.189-1.24                     ########################################
[   17s] libdw-0.189-1.24                      ########################################
[   17s] libblkid-2.37.4-2.1                   ########################################
[   17s] nspr-4.35-1.19                        ########################################
[   18s] binutils-2.33.1-1.24                  ########################################
[   18s] pam-1.1.6-1.1                         ########################################
[   19s] libcap-2.24-1.18                      ########################################
[   19s] libfreebl3-3.87-1.24                  ########################################
[   19s] liblua-5.1.5-1.19                     ########################################
[   19s] libpopt-1.16-1.19                     ########################################
[   20s] libuuid-2.37.4-2.1                    ########################################
[   20s] libzstd1-1.5.2-1.23                   ########################################
[   20s] pkg-config-0.29.2-1.21                ########################################
[   20s] libfdisk-2.37.4-2.1                   ########################################
[   20s] nss-certs-3.87-1.24                   ########################################
[   20s] libmount-2.37.4-2.1                   ########################################
[   21s] libasm-0.189-1.24                     ########################################
[   21s] libxml2-2.10.2-1.24                   ########################################
[   21s] xz-5.4.0-1.24                         ########################################
[   21s] bzip2-1.0.8-1.21                      ########################################
[   21s] libcc1-9.2.0-1.25                     ########################################
[   21s] libubsan-9.2.0-1.25                   ########################################
[   22s] libgfortran-9.2.0-1.25                ########################################
[   22s] linux-glibc-devel-5.4-1.2             ########################################
[   23s] glibc-devel-2.30-1.24                 ########################################
[   23s] terminfo-base-full-6.4-1.7            ########################################
[   23s] libncurses6-6.4-1.7                   ########################################
[   23s] libreadline-5.2-1.21                  ########################################
[   24s] gzip-1.3.12-1.17                      ########################################
[   24s] make-4.3-1.20                         ########################################
[   24s] findutils-4.3.8-1.21                  ########################################
[   24s] gdbm-1.8.3-1.24                       ########################################
[   27s] perl-5.34.0-1.21                      ########################################
[   27s] build-mkbaselibs-20120927-1.1         ########################################
[   27s] libatomic-9.2.0-1.25                  ########################################
[   27s] libattr-2.5.1-1.21                    ########################################
[   27s] libacl-2.2.53-1.21                    ########################################
[   27s] tar-1.17-1.1                          ########################################
[   27s] libgomp-9.2.0-1.25                    ########################################
[   28s] libitm-9.2.0-1.25                     ########################################
[   29s] gcc-9.2.0-1.25                        ########################################
[   29s] libltdl-2.4.7-1.24                    ########################################
[   30s] libopenssl3-3.0.9-4.8                 ########################################
[   30s] libarchive-3.6.2-4.7                  ########################################
[   30s] libpcre-8.45-1.8                      ########################################
[   31s] libsmack-1.3.1-1.18                   ########################################
[   31s] libsmartcols-2.37.4-2.1               ########################################
[   31s] libsqlite-3.40.1-1.21                 ########################################
[   31s] libsoftokn3-3.87-1.24                 ########################################
[   32s] nss-3.87-1.24                         ########################################
[   32s] m4-1.4.19-1.1                         ########################################
[   32s] autoconf-2.71-1.24                    ########################################
[   32s] automake-1.16.5-1.24                  ########################################
[   32s] patch-2.7.6-1.18                      ########################################
[   32s] sed-4.1c-1.1                          ########################################
[   33s] util-linux-2.37.4-2.1                 ########################################
[   33s] libmagic-data-5.44-1.18               ########################################
[   34s] libmagic-5.44-1.18                    ########################################
[   35s] rpm-4.14.1.1-2.3                      ########################################
[   35s] rpm-build-4.14.1.1-2.3                ########################################
[   35s] file-5.44-1.18                        ########################################
[   35s] util-linux-su-2.37.4-2.1              ########################################
[   35s] libtool-2.4.7-1.24                    ########################################
[   35s] smack-1.3.1-1.18                      ########################################
[   35s] grep-2.5.2-1.1                        ########################################
[   47s] qemu-accel-x86_64-aarch64-0.4-2.5     ########################################
[   48s] build-20120927-1.1                    ########################################
[   48s] libncurses-6.4-1.7                    ########################################
[   48s] less-608-1.1                          ########################################
[   48s] procps-ng-3.3.17-1.2                  ########################################
[   48s] zlib-devel-1.2.13-2.4                 ########################################
[   48s] elfutils-0.189-1.24                   ########################################
[   48s] util-macros-1.19.0-1.1                ########################################
[   48s] libstdc++-devel-9.2.0-1.25            ########################################
[   49s] glibc-locale-2.30-1.24                ########################################
[   49s] tzdata-2023c-1.1                      ########################################
[   51s] cpp-9.2.0-1.25                        ########################################
[   51s] gcc-c++-9.2.0-1.25                    ########################################
[   51s] build-compare-2015.04.28-1.13         ########################################
[   58s] qemu-linux-user-x86_64-cross-5.2.0-20.########################################
[   58s] gawk-3.1.5-1.1                        ########################################
[   58s] cpio-2.8-1.1                          ########################################
[   58s] diffutils-3.8-1.1                     ########################################
[   58s] hostname-3.23-1.1                     ########################################
[   58s] libext2fs-1.46.0-1.22                 ########################################
[   58s] net-tools-2.0_20121208git-2.1         ########################################
[   58s] update-alternatives-1.21.18-1.1       ########################################
[   58s] which-2.17-1.1                        ########################################
[   59s] now finalizing build dir...
[   60s] -----------------------------------------------------------------
[   60s] I have the following modifications for libpciaccess.spec:
[   60s] 6c6
[   60s] < Release:        0
[   60s] ---
[   60s] > Release:        2.1
[   60s] 84a85
[   60s] > %changelog
[   60s] build target is aarch64-tizen-linux
[   60s] -----------------------------------------------------------------
[   60s] ----- building libpciaccess.spec (user abuild)
[   60s] -----------------------------------------------------------------
[   60s] -----------------------------------------------------------------
[   60s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec
[   60s] Building target platforms: aarch64-tizen-linux
[   60s] Building for target aarch64-tizen-linux
[   60s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.cfLVXt
[   60s] + umask 022
[   60s] + cd /home/abuild/rpmbuild/BUILD
[   60s] + cd /home/abuild/rpmbuild/BUILD
[   60s] + rm -rf libpciaccess-0.13.2
[   60s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2
[   60s] + /bin/tar -xof -
[   60s] + STATUS=0
[   60s] + '[' 0 -ne 0 ']'
[   60s] + cd libpciaccess-0.13.2
[   60s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   60s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):'
[   60s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):
[   60s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[   60s] patching file src/Makefile.am
[   60s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):'
[   60s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):
[   60s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[   60s] patching file src/common_bridge.c
[   60s] patching file src/linux_sysfs.c
[   60s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):'
[   60s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):
[   60s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[   60s] patching file src/linux_sysfs.c
[   60s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest .
[   60s] + exit 0
[   60s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.1aLzSv
[   60s] + umask 022
[   60s] + cd /home/abuild/rpmbuild/BUILD
[   60s] + cd libpciaccess-0.13.2
[   60s] + ref=/usr/lib/rpm
[   60s] + mints=0
[   60s] + case $(uname -m) in
[   60s] ++ uname -m
[   60s] + mints=20120610
[   60s] + for s in guess sub
[   60s] ++ find -maxdepth 8 -name config.guess
[   60s] + for s in guess sub
[   60s] ++ find -maxdepth 8 -name config.sub
[   60s] + LANG=C
[   60s] + export LANG
[   60s] + unset DISPLAY
[   60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[   60s] + export CFLAGS
[   60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[   60s] + export CXXFLAGS
[   60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[   60s] + export FFLAGS
[   60s] + LDFLAGS=
[   60s] + export LDFLAGS
[   60s] + NOCONFIGURE=1
[   60s] + AR=gcc-ar
[   60s] + export AR
[   60s] + NM=/bin/nm
[   60s] + export NM
[   60s] + RANLIB=gcc-ranlib
[   60s] + export RANLIB
[   60s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[   60s] + export CFLAGS
[   60s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[   60s] + export CXXFLAGS
[   60s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[   60s] + export FFLAGS
[   60s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info
[   61s] autoreconf: export WARNINGS=
[   61s] autoreconf: Entering directory '.'
[   61s] autoreconf: configure.ac: not using Gettext
[   62s] autoreconf: running: aclocal -I m4
[   64s] autoreconf: configure.ac: tracing
[   66s] autoreconf: running: libtoolize --copy
[   66s] libtoolize: putting auxiliary files in '.'.
[   66s] libtoolize: copying file './ltmain.sh'
[   66s] libtoolize: putting macros in 'm4'.
[   66s] libtoolize: copying file 'm4/libtool.m4'
[   66s] libtoolize: copying file 'm4/ltoptions.m4'
[   66s] libtoolize: copying file 'm4/ltsugar.m4'
[   66s] libtoolize: copying file 'm4/ltversion.m4'
[   66s] libtoolize: copying file 'm4/lt~obsolete.m4'
[   66s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
[   66s] libtoolize: and rerunning libtoolize and aclocal.
[   66s] autoreconf: configure.ac: not using Intltool
[   66s] autoreconf: configure.ac: not using Gtkdoc
[   66s] autoreconf: running: aclocal -I m4
[   69s] autoreconf: running: /usr/bin/autoconf
[   69s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
[   69s] configure.ac:36: You should run autoupdate.
[   69s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from...
[   69s] configure.ac:36: the top level
[   69s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete.
[   69s] configure.ac:42: You should run autoupdate.
[   69s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from...
[   69s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from...
[   69s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from...
[   69s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from...
[   69s] configure.ac:42: the top level
[   71s] autoreconf: running: /usr/bin/autoheader
[   72s] autoreconf: running: automake --add-missing --copy --no-force
[   73s] configure.ac:33: installing './compile'
[   73s] configure.ac:36: installing './config.guess'
[   73s] configure.ac:36: installing './config.sub'
[   73s] configure.ac:32: installing './install-sh'
[   73s] configure.ac:32: installing './missing'
[   74s] scanpci/Makefile.am: installing './depcomp'
[   74s] autoreconf: Leaving directory '.'
[   74s] checking for a BSD-compatible install... /bin/install -c
[   74s] checking whether build environment is sane... yes
[   74s] checking for a race-free mkdir -p... /bin/mkdir -p
[   74s] checking for gawk... gawk
[   74s] checking whether make sets $(MAKE)... yes
[   74s] checking whether make supports nested variables... yes
[   74s] checking whether make supports the include directive... yes (GNU style)
[   74s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc
[   74s] checking whether the C compiler works... yes
[   74s] checking for C compiler default output file name... a.out
[   74s] checking for suffix of executables... 
[   74s] checking whether we are cross compiling... no
[   74s] checking for suffix of object files... o
[   74s] checking whether the compiler supports GNU C... yes
[   74s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes
[   74s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed
[   75s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes
[   75s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3
[   75s] checking for stdio.h... yes
[   75s] checking for stdlib.h... yes
[   75s] checking for string.h... yes
[   75s] checking for inttypes.h... yes
[   75s] checking for stdint.h... yes
[   75s] checking for strings.h... yes
[   75s] checking for sys/stat.h... yes
[   75s] checking for sys/types.h... yes
[   75s] checking for unistd.h... yes
[   75s] checking for wchar.h... yes
[   75s] checking for minix/config.h... no
[   75s] checking whether it is safe to define __EXTENSIONS__... yes
[   75s] checking whether _XOPEN_SOURCE should be defined... no
[   75s] checking build system type... aarch64-tizen-linux-gnu
[   75s] checking host system type... aarch64-tizen-linux-gnu
[   75s] checking how to print strings... printf
[   75s] checking for a sed that does not truncate output... /bin/sed
[   75s] checking for grep that handles long lines and -e... /bin/grep
[   75s] checking for egrep... /bin/grep -E
[   75s] checking for fgrep... /bin/grep -F
[   75s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld
[   75s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes
[   75s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm
[   75s] checking the name lister (/bin/nm) interface... BSD nm
[   75s] checking whether ln -s works... yes
[   75s] checking the maximum length of command line arguments... 1572864
[   75s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop
[   75s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop
[   75s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r
[   75s] checking for aarch64-tizen-linux-gnu-file... no
[   75s] checking for file... file
[   75s] checking for aarch64-tizen-linux-gnu-objdump... no
[   75s] checking for objdump... objdump
[   75s] checking how to recognize dependent libraries... pass_all
[   75s] checking for aarch64-tizen-linux-gnu-dlltool... no
[   75s] checking for dlltool... no
[   75s] checking how to associate runtime and link libraries... printf %s\n
[   75s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar
[   75s] checking for archiver @FILE support... @
[   75s] checking for aarch64-tizen-linux-gnu-strip... no
[   75s] checking for strip... strip
[   75s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib
[   75s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok
[   75s] checking for sysroot... no
[   75s] checking for a working dd... /bin/dd
[   75s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1
[   75s] checking for aarch64-tizen-linux-gnu-mt... no
[   75s] checking for mt... no
[   75s] checking if : is a manifest tool... no
[   75s] checking for dlfcn.h... yes
[   75s] checking for objdir... .libs
[   75s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
[   75s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
[   75s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
[   75s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no
[   75s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes
[   75s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes
[   75s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes
[   75s] checking whether -lc should be explicitly linked in... no
[   75s] checking dynamic linker characteristics... GNU/Linux ld.so
[   75s] checking how to hardcode library paths into programs... immediate
[   75s] checking whether stripping libraries is possible... yes
[   75s] checking if libtool supports shared libraries... yes
[   75s] checking whether to build shared libraries... yes
[   75s] checking whether to build static libraries... yes
[   75s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed
[   76s] checking whether __clang__ is declared... no
[   76s] checking whether __INTEL_COMPILER is declared... no
[   76s] checking whether __SUNPRO_C is declared... no
[   76s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config
[   76s] checking pkg-config is at least version 0.9.0... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes
[   76s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes
[   77s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes
[   78s] checking whether make supports nested variables... (cached) yes
[   78s] checking for special C compiler options needed for large files... no
[   78s] checking for _FILE_OFFSET_BITS value needed for large files... no
[   78s] checking for err.h... yes
[   78s] checking for asm/mtrr.h... no
[   78s] checking for struct pci_io.pi_sel.pc_domain... no
[   78s] checking that generated files are newer than configure... done
[   78s] configure: creating ./config.status
[   78s] config.status: creating Makefile
[   78s] config.status: creating include/Makefile
[   78s] config.status: creating man/Makefile
[   78s] config.status: creating src/Makefile
[   79s] config.status: creating scanpci/Makefile
[   79s] config.status: creating pciaccess.pc
[   79s] config.status: creating config.h
[   79s] config.status: executing depfiles commands
[   79s] config.status: executing libtool commands
[   79s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w'
[   79s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -w'
[   79s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro'
[   79s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro'
[   79s] + AR=gcc-ar
[   79s] + export AR
[   79s] + NM=/bin/nm
[   79s] + export NM
[   79s] + RANLIB=gcc-ranlib
[   79s] + export RANLIB
[   79s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro'
[   79s] + export CFLAGS
[   79s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g'
[   79s] + export CXXFLAGS
[   79s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir'
[   79s] + export FFLAGS
[   79s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib
[   79s] checking for a BSD-compatible install... /bin/install -c
[   79s] checking whether build environment is sane... yes
[   79s] checking for a race-free mkdir -p... /bin/mkdir -p
[   79s] checking for gawk... gawk
[   79s] checking whether make sets $(MAKE)... yes
[   79s] checking whether make supports nested variables... yes
[   79s] checking whether make supports the include directive... yes (GNU style)
[   79s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc
[   79s] checking whether the C compiler works... yes
[   79s] checking for C compiler default output file name... a.out
[   80s] checking for suffix of executables... 
[   80s] checking whether we are cross compiling... no
[   80s] checking for suffix of object files... o
[   80s] checking whether the compiler supports GNU C... yes
[   80s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes
[   80s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed
[   80s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes
[   80s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3
[   80s] checking for stdio.h... yes
[   80s] checking for stdlib.h... yes
[   80s] checking for string.h... yes
[   80s] checking for inttypes.h... yes
[   80s] checking for stdint.h... yes
[   80s] checking for strings.h... yes
[   80s] checking for sys/stat.h... yes
[   80s] checking for sys/types.h... yes
[   80s] checking for unistd.h... yes
[   80s] checking for wchar.h... yes
[   80s] checking for minix/config.h... no
[   80s] checking whether it is safe to define __EXTENSIONS__... yes
[   80s] checking whether _XOPEN_SOURCE should be defined... no
[   80s] checking build system type... aarch64-tizen-linux-gnu
[   80s] checking host system type... aarch64-tizen-linux-gnu
[   80s] checking how to print strings... printf
[   80s] checking for a sed that does not truncate output... /bin/sed
[   80s] checking for grep that handles long lines and -e... /bin/grep
[   80s] checking for egrep... /bin/grep -E
[   80s] checking for fgrep... /bin/grep -F
[   80s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld
[   80s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes
[   80s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm
[   80s] checking the name lister (/bin/nm) interface... BSD nm
[   80s] checking whether ln -s works... yes
[   80s] checking the maximum length of command line arguments... 1572864
[   80s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop
[   80s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop
[   80s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r
[   80s] checking for aarch64-tizen-linux-gnu-file... no
[   80s] checking for file... file
[   80s] checking for aarch64-tizen-linux-gnu-objdump... no
[   80s] checking for objdump... objdump
[   80s] checking how to recognize dependent libraries... pass_all
[   80s] checking for aarch64-tizen-linux-gnu-dlltool... no
[   80s] checking for dlltool... no
[   80s] checking how to associate runtime and link libraries... printf %s\n
[   80s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar
[   80s] checking for archiver @FILE support... @
[   80s] checking for aarch64-tizen-linux-gnu-strip... no
[   80s] checking for strip... strip
[   80s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib
[   80s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok
[   80s] checking for sysroot... no
[   80s] checking for a working dd... /bin/dd
[   81s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1
[   81s] checking for aarch64-tizen-linux-gnu-mt... no
[   81s] checking for mt... no
[   81s] checking if : is a manifest tool... no
[   81s] checking for dlfcn.h... yes
[   81s] checking for objdir... .libs
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... yes
[   81s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
[   81s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes
[   81s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes
[   81s] checking whether -lc should be explicitly linked in... no
[   81s] checking dynamic linker characteristics... GNU/Linux ld.so
[   81s] checking how to hardcode library paths into programs... immediate
[   81s] checking whether stripping libraries is possible... yes
[   81s] checking if libtool supports shared libraries... yes
[   81s] checking whether to build shared libraries... yes
[   81s] checking whether to build static libraries... no
[   81s] checking for aarch64-tizen-linux-gnu-gcc options needed to detect all undeclared functions... none needed
[   81s] checking whether __clang__ is declared... no
[   81s] checking whether __INTEL_COMPILER is declared... no
[   81s] checking whether __SUNPRO_C is declared... no
[   81s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config
[   81s] checking pkg-config is at least version 0.9.0... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unknown-warning-option... no
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=unused-command-line-argument... no
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wall... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wpointer-arith... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-declarations... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wformat=2... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wstrict-prototypes... yes
[   81s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-prototypes... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wnested-externs... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wbad-function-cast... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wold-style-definition... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wdeclaration-after-statement... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wunused... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wuninitialized... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wshadow... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-noreturn... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wmissing-format-attribute... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wredundant-decls... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Wlogical-op... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=implicit... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=nonnull... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=init-self... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=main... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=missing-braces... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=sequence-point... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=return-type... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=trigraphs... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=array-bounds... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=write-strings... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=address... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=int-to-pointer-cast... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=pointer-to-int-cast... yes
[   82s] checking if aarch64-tizen-linux-gnu-gcc supports -pedantic... yes
[   83s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror... yes
[   83s] checking if aarch64-tizen-linux-gnu-gcc supports -Werror=attributes... yes
[   83s] checking whether make supports nested variables... (cached) yes
[   83s] checking for gzopen in -lz... yes
[   83s] checking for zlib.h... yes
[   83s] checking for special C compiler options needed for large files... no
[   83s] checking for _FILE_OFFSET_BITS value needed for large files... no
[   83s] checking for err.h... yes
[   83s] checking for asm/mtrr.h... no
[   83s] checking for struct pci_io.pi_sel.pc_domain... no
[   83s] checking that generated files are newer than configure... done
[   83s] configure: creating ./config.status
[   83s] config.status: creating Makefile
[   83s] config.status: creating include/Makefile
[   83s] config.status: creating man/Makefile
[   83s] config.status: creating src/Makefile
[   83s] config.status: creating scanpci/Makefile
[   83s] config.status: creating pciaccess.pc
[   83s] config.status: creating config.h
[   83s] config.status: executing depfiles commands
[   84s] config.status: executing libtool commands
[   84s] + make -j12
[   84s] make  all-recursive
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] Making all in include
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] make[2]: Nothing to be done for 'all'.
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] Making all in man
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s]   GEN      scanpci.1
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s] Making all in src
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s]   CC       common_bridge.lo
[   84s]   CC       common_iterator.lo
[   84s]   CC       common_init.lo
[   84s]   CC       common_interface.lo
[   84s]   CC       common_io.lo
[   84s]   CC       common_capability.lo
[   84s]   CC       common_device_name.lo
[   84s]   CC       common_map.lo
[   84s]   CC       common_vgaarb.lo
[   84s]   CC       linux_sysfs.lo
[   84s]   CC       linux_devmem.lo
[   84s]   CCLD     libpciaccess.la
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s] Making all in scanpci
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s]   CC       scanpci.o
[   84s]   CCLD     scanpci
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] + exit 0
[   84s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.uxnkvw
[   84s] + umask 022
[   84s] + cd /home/abuild/rpmbuild/BUILD
[   84s] + cd libpciaccess-0.13.2
[   84s] + LANG=C
[   84s] + export LANG
[   84s] + unset DISPLAY
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   84s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   84s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 install
[   84s] Making install in include
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] make[2]: Nothing to be done for 'install-exec-am'.
[   84s]  /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/include'
[   84s]  /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/include'
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include'
[   84s] Making install in man
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s] make[2]: Nothing to be done for 'install-exec-am'.
[   84s] make[2]: Nothing to be done for 'install-data-am'.
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man'
[   84s] Making install in src
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s]  /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64'
[   84s]  /bin/sh ../libtool   --mode=install /bin/install -c   libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64'
[   84s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64/libpciaccess.so.0.13.2
[   84s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; })
[   84s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64 && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; })
[   84s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64/libpciaccess.la
[   84s] libtool: warning: remember to run 'libtool --finish /usr/lib64'
[   84s] make[2]: Nothing to be done for 'install-data-am'.
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src'
[   84s] Making install in scanpci
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s] make[2]: Nothing to be done for 'install-exec-am'.
[   84s] make[2]: Nothing to be done for 'install-data-am'.
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci'
[   84s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] make[2]: Nothing to be done for 'install-exec-am'.
[   84s]  /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64/pkgconfig'
[   84s]  /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64/pkgconfig'
[   84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2'
[   84s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/info/dir
[   84s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 -regex '.*\.la$'
[   84s] + xargs rm -f --
[   84s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 -regex '.*\.a$'
[   84s] + xargs rm -f --
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/info
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/doc/packages
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/doc/libpciaccess
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/doc/libpciaccess-0.13.2
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/gtk-doc
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/doc
[   84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/man
[   84s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 -regex '.*/man/man./.*.[0-9]'
[   84s] + xargs rm -f --
[   84s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 -regex '.*/man/../man./.*.[0-9]'
[   84s] + xargs rm -f --
[   84s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 -regex '.*/man/man./.*.[0-9]pm'
[   84s] + xargs rm -f --
[   84s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-2.1 --unique-debug-src-base libpciaccess-0.13.2-2.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2
[   85s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/lib64/libpciaccess.so.0.13.2
[   85s] 235 blocks
[   85s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest
[   85s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest
[   85s] + /usr/lib/rpm/check-buildroot
[   85s] + /usr/lib/rpm//brp-compress
[   85s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[   85s] + /usr/lib/rpm/brp-python-hardlink
[   85s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   85s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list
[   85s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64 ~/rpmbuild/BUILD/libpciaccess-0.13.2
[   85s] ~/rpmbuild/BUILD/libpciaccess-0.13.2
[   85s] Processing files: libpciaccess-0.13.2-2.1.aarch64
[   85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   85s] 
[   85s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.XJGCix
[   85s] + umask 022
[   85s] + cd /home/abuild/rpmbuild/BUILD
[   85s] + cd libpciaccess-0.13.2
[   85s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess
[   85s] + export LC_ALL=C
[   85s] + LC_ALL=C
[   85s] + export LICENSEDIR
[   85s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess
[   85s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess
[   85s] + exit 0
[   85s] Provides: libpciaccess = 0.13.2-2.1 libpciaccess(aarch-64) = 0.13.2-2.1 libpciaccess.so.0()(64bit)
[   85s] Requires(interp): /sbin/ldconfig /sbin/ldconfig
[   85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   85s] Requires(post): /sbin/ldconfig
[   85s] Requires(postun): /sbin/ldconfig
[   85s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libz.so.1()(64bit) libz.so.1(ZLIB_1.2.3.3)(64bit)
[   85s] Processing files: libpciaccess-debugsource-0.13.2-2.1.aarch64
[   85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   85s] 
[   85s] Provides: libpciaccess-debugsource = 0.13.2-2.1 libpciaccess-debugsource(aarch-64) = 0.13.2-2.1
[   85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   85s] Processing files: libpciaccess-devel-0.13.2-2.1.aarch64
[   85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   85s] 
[   85s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.7sdO3w
[   85s] + umask 022
[   85s] + cd /home/abuild/rpmbuild/BUILD
[   85s] + cd libpciaccess-0.13.2
[   85s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess-devel
[   85s] + export LC_ALL=C
[   85s] + LC_ALL=C
[   85s] + export LICENSEDIR
[   85s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess-devel
[   85s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64/usr/share/licenses/libpciaccess-devel
[   85s] + exit 0
[   85s] Provides: libpciaccess-devel = 0.13.2-2.1 libpciaccess-devel(aarch-64) = 0.13.2-2.1 pkgconfig(pciaccess) = 0.13.2
[   85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   85s] Requires: /usr/bin/pkg-config libpciaccess.so.0()(64bit)
[   85s] Processing files: libpciaccess-debuginfo-0.13.2-2.1.aarch64
[   85s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   85s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   85s] 
[   85s] Provides: libpciaccess-debuginfo = 0.13.2-2.1 libpciaccess-debuginfo(aarch-64) = 0.13.2-2.1
[   85s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   85s] Recommends: libpciaccess-debugsource(aarch-64) = 0.13.2-2.1
[   85s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   85s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-2.1.src.rpm
[   85s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-0.13.2-2.1.aarch64.rpm
[   85s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debugsource-0.13.2-2.1.aarch64.rpm
[   85s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-devel-0.13.2-2.1.aarch64.rpm
[   85s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debuginfo-0.13.2-2.1.aarch64.rpm
[   85s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.gnmVgx
[   85s] + umask 022
[   85s] + cd /home/abuild/rpmbuild/BUILD
[   85s] + cd libpciaccess-0.13.2
[   85s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.aarch64
[   85s] + exit 0
[   85s] ... checking for files with abuild user/group
[   85s] ... creating baselibs
[   86s] no targets for arch aarch64, nothing to do
[   86s] ... comparing built packages with the former built
[   86s] /usr/lib/build/pkg-diff.sh
[   86s] compare /.build.oldpackages/libpciaccess-0.13.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-2.1.src.rpm
[   86s] This is not a prerelease project. Compare the project name.
[   86s] comparing rpmtags
[   86s] comparing RELEASE
[   86s] comparing PROVIDES
[   86s] comparing scripts
[   86s] comparing filelist
[   86s] comparing file checksum
[   86s] RPM meta information is identical
[   86s] compare /.build.oldpackages/libpciaccess-0.13.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-0.13.2-2.1.aarch64.rpm
[   86s] Comparing libpciaccess-0.13.2-1.1.aarch64.rpm to libpciaccess-0.13.2-2.1.aarch64.rpm
[   86s] This is not a prerelease project. Compare the project name.
[   86s] comparing rpmtags
[   86s] --- /tmp/tmp.RuPb103072/tmp.KcyG103269	2023-11-23 13:26:28.648002799 +0900
[   86s] +++ /tmp/tmp.RuPb103072/tmp.wiIj103318	2023-11-23 13:26:28.652002799 +0900
[   86s] @@ -9,4 +9,4 @@
[   86s]   cpio xz 5T
[   86s]   
[   86s]   1363608000 Anas Nashif <anas.nashif@intel.com> submit/trunk/20130204.203930@07d4de2 - Fixed package groups
[   86s] -obs://127.0.0.1/Tizen-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base
[   86s] +obs://127.0.0.1/Tizen-Base/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess Tizen-Base
[   86s] RPM meta information is different
[   86s] compare /.build.oldpackages/libpciaccess-debuginfo-0.13.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debuginfo-0.13.2-2.1.aarch64.rpm
[   86s] skipping -debuginfo package
[   86s] compare /.build.oldpackages/libpciaccess-debugsource-0.13.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-debugsource-0.13.2-2.1.aarch64.rpm
[   86s] Comparing libpciaccess-debugsource-0.13.2-1.1.aarch64.rpm to libpciaccess-debugsource-0.13.2-2.1.aarch64.rpm
[   86s] This is not a prerelease project. Compare the project name.
[   86s] comparing rpmtags
[   86s] --- /tmp/tmp.pZtd103547/tmp.vqEQ103729	2023-11-23 13:26:28.836002800 +0900
[   86s] +++ /tmp/tmp.pZtd103547/tmp.tLGz103772	2023-11-23 13:26:28.840002800 +0900
[   86s] @@ -10,4 +10,4 @@
[   86s]   cpio xz 5T
[   86s]   
[   86s]   1363608000 Anas Nashif <anas.nashif@intel.com> submit/trunk/20130204.203930@07d4de2 - Fixed package groups
[   86s] -obs://127.0.0.1/Tizen-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base
[   86s] +obs://127.0.0.1/Tizen-Base/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess Tizen-Base
[   86s] RPM meta information is different
[   86s] compare /.build.oldpackages/libpciaccess-devel-0.13.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/libpciaccess-devel-0.13.2-2.1.aarch64.rpm
[   86s] Comparing libpciaccess-devel-0.13.2-1.1.aarch64.rpm to libpciaccess-devel-0.13.2-2.1.aarch64.rpm
[   87s] This is not a prerelease project. Compare the project name.
[   87s] comparing rpmtags
[   87s] --- /tmp/tmp.mDyz103992/tmp.PqtG104116	2023-11-23 13:26:29.016002800 +0900
[   87s] +++ /tmp/tmp.mDyz103992/tmp.NAck104130	2023-11-23 13:26:29.020002800 +0900
[   87s] @@ -12,4 +12,4 @@
[   87s]   cpio xz 5T
[   87s]   
[   87s]   1363608000 Anas Nashif <anas.nashif@intel.com> submit/trunk/20130204.203930@07d4de2 - Fixed package groups
[   87s] -obs://127.0.0.1/Tizen-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base
[   87s] +obs://127.0.0.1/Tizen-Base/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess Tizen-Base
[   87s] RPM meta information is different
[   87s] 
[   87s] 387f6708f267 finished "build libpciaccess.spec" at Thu Nov 23 04:26:29 UTC 2023.
[   87s] 

Retried build at Tue Dec 12 10:09:48 2023 returned same result, skipped

Retried build at Wed Dec 13 06:18:25 2023 returned same result, skipped

Retried build at Thu Jan  4 10:09:08 2024 returned same result, skipped

Retried build at Sat Jan  6 14:03:20 2024 returned same result, skipped

Retried build at Tue Jan 23 10:45:18 2024 returned same result, skipped

Retried build at Tue Jan 23 13:06:15 2024 returned same result, skipped

Retried build at Thu Jan 25 03:33:13 2024 returned same result, skipped

Retried build at Thu Feb 15 06:55:13 2024 returned same result, skipped

Retried build at Tue Feb 20 23:21:51 2024 returned same result, skipped

Retried build at Thu Feb 22 23:36:37 2024 returned same result, skipped

Retried build at Sun Feb 25 15:18:00 2024 returned same result, skipped

Retried build at Thu Mar  7 00:00:16 2024 returned same result, skipped

Retried build at Mon Mar 11 10:52:43 2024 returned same result, skipped

Retried build at Tue Mar 12 00:56:06 2024 returned same result, skipped

Retried build at Mon Mar 18 11:34:21 2024 returned same result, skipped

Retried build at Mon Mar 25 10:48:09 2024 returned same result, skipped

Retried build at Fri Mar 29 04:30:42 2024 returned same result, skipped

Retried build at Fri Apr  5 00:39:06 2024 returned same result, skipped

Retried build at Fri Apr  5 02:06:29 2024 returned same result, skipped

Retried build at Mon Apr 15 01:02:49 2024 returned same result, skipped

Retried build at Thu May 16 10:53:19 2024 returned same result, skipped

Retried build at Thu May 30 03:48:39 2024 returned same result, skipped

Retried build at Wed Jun 12 02:19:13 2024 returned same result, skipped

Retried build at Wed Jul  3 02:45:43 2024 returned same result, skipped

Retried build at Wed Jul 10 07:21:14 2024 returned same result, skipped

Retried build at Tue Jul 23 23:58:29 2024 returned same result, skipped

Retried build at Thu Jul 25 08:27:49 2024 returned same result, skipped

Retried build at Sun Aug  4 23:47:46 2024 returned same result, skipped

Retried build at Wed Aug 21 09:31:48 2024 returned same result, skipped

Retried build at Thu Aug 22 23:53:01 2024 returned same result, skipped