[    0s] on X86_64, no limit mem size
[    0s] Using BUILD_ROOT=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.armv7l.12
[    0s] Using BUILD_ARCH=armv7l:armv7el:armv6l:armv5tejl:armv5tel:armv5l:armv4tl:armv4l:armv3l:noarch
[    0s] 
[    0s] 
[    0s] qb_builder-0 started "build perl-PerlIO-gzip.spec" at Mon Oct 31 22:42:56 UTC 2022.
[    0s] 
[    0s] 
[    0s] processing recipe /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_7.0_base_standard/perl-PerlIO-gzip-0.18-1/perl-PerlIO-gzip.spec ...
[    0s] init_buildsystem --configdir /usr/lib/build/configs --cachedir /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache --define jobs 8 --define _smp_mflags -j8 --define _costomized_smp_mflags -j26 --repository /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_7.0_base_standard/armv7l/RPMS --repository http://download.tizen.org/snapshots/tizen/7.0-base-tool/tizen-7.0-base-tool_20221029.2/repos/standard/packages/ --repository http://download.tizen.org/snapshots/tizen/7.0-base-tool/tizen-7.0-base-tool_20221029.2/repos/standard/debug/ /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/sources/tizen_7.0_base_standard/perl-PerlIO-gzip-0.18-1/perl-PerlIO-gzip.spec build ...
[    1s] initializing /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.armv7l.12/.srcfiles.cache ...
[    1s] /usr/lib/build/createdirdeps --oldfile /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.armv7l.12/.srcfiles.cache /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/repos/tizen_7.0_base_standard/armv7l/RPMS
[    2s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/tizen/7.0-base-tool/tizen-7.0-base-tool_20221029.2/repos/standard/packages/
[    3s] /usr/lib/build/createrepomddeps --cachedir=/data/workspace/gbsbuild-ROOT/GBS-ROOT/local/cache http://download.tizen.org/snapshots/tizen/7.0-base-tool/tizen-7.0-base-tool_20221029.2/repos/standard/debug/
[    3s] expanding package dependencies...
[    4s] copying qemu
[    6s] 
[    6s] registering binfmt handlers for cross build
[    6s] write: File exists
[    6s] /proc/sys/fs/binfmt_misc/register: write failed
[    6s] /usr/lib/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P
[    6s] 
[    6s] /.build/qemu-reg: No such file or directory
[    6s] /.build/qemu-reg: failed. Trying alternate binfmt file
[    6s] write: File exists
[    6s] /proc/sys/fs/binfmt_misc/register: write failed
[    6s] /usr/lib/build/qemu-reg: line 8: write failed. Content: :aarch64:M::\x7fELF\x02\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\xb7:\xff\xff\xff\xff\xff\xff\xff\x00\xff\xff\xff\xff\xff\xff\xff\xff\xfe\xff\xff:/usr/bin/qemu-arm64-binfmt:P
[    6s] 
[    6s] /usr/lib/build/qemu-reg: binfmt registration failed
[    6s] calculating packages to download...
[   19s] reordering...cycle: libsoftokn3 -> nss
[   19s]   breaking dependency nss -> libsoftokn3
[   19s] reordering done
[   21s] deleting fdupes
[   21s] deleting libxml2-tools
[   21s] deleting sgml-skel
[   21s] deleting unzip
[   22s] [1/95] keeping libmagic-data-5.41-1.29
[   22s] [2/95] keeping setup-0.9-1.1
[   22s] [3/95] keeping filesystem-3.1-1.1
[   22s] [4/95] keeping glibc-2.30-1.14
[   22s] [5/95] keeping libatomic-9.2.0-1.13
[   22s] [6/95] keeping libgcc-9.2.0-1.13
[   22s] [7/95] keeping bash-3.2.57-1.1
[   22s] [8/95] keeping cpio-2.8-1.1
[   22s] [9/95] keeping diffutils-3.3-1.1
[   22s] [10/95] keeping findutils-4.3.8-1.37
[   22s] [11/95] keeping gdbm-1.8.3-1.43
[   22s] [12/95] keeping hostname-3.23-1.1
[   22s] [13/95] keeping libattr-2.5.1-1.40
[   22s] [14/95] keeping libblkid-2.37.4-1.1
[   22s] [15/95] keeping libbz2-1.0.8-1.41
[   22s] [16/95] keeping libcap-2.24-1.33
[   22s] [17/95] keeping libfreebl3-3.34.1-1.23
[   22s] [18/95] keeping libgfortran-9.2.0-1.13
[   22s] [19/95] keeping libgomp-9.2.0-1.13
[   22s] [20/95] keeping libitm-9.2.0-1.13
[   22s] [21/95] keeping libltdl-2.4.6-1.29
[   22s] [22/95] keeping liblua-5.1.5-1.12
[   22s] [23/95] keeping liblzma-5.2.5-1.38
[   22s] [24/95] keeping libopenssl11-1.1.1q-1.19
[   22s] [25/95] keeping libpcre-8.45-1.2
[   22s] [26/95] keeping libpopt-1.16-1.31
[   22s] [27/95] keeping libsmack-1.3.1-1.27
[   22s] [28/95] keeping libsmartcols-2.37.4-1.1
[   22s] [29/95] keeping libsqlite-3.39.0-1.33
[   22s] [30/95] keeping libstdc++-9.2.0-1.13
[   22s] [31/95] keeping libuuid-2.37.4-1.1
[   22s] [32/95] keeping libzstd1-1.4.5-1.34
[   22s] [33/95] keeping m4-1.4.19-1.1
[   22s] [34/95] keeping net-tools-2.0_20121208git-1.1
[   22s] [35/95] keeping nspr-4.12-1.31
[   22s] [36/95] keeping patch-2.7.6-1.30
[   22s] [37/95] keeping pkg-config-0.29.2-1.32
[   22s] [38/95] keeping sed-4.1c-1.1
[   22s] [39/95] keeping update-alternatives-1.20.5-1.1
[   22s] [40/95] keeping which-2.17-1.1
[   22s] [41/95] keeping zlib-1.2.11-1.40
[   22s] [42/95] keeping build-compare-2015.04.28-1.11
[   22s] [43/95] keeping libstdc++-devel-9.2.0-1.13
[   22s] [44/95] keeping qemu-linux-user-x86_64-cross-5.2.0-1.1
[   22s] [45/95] keeping terminfo-base-full-6.2-1.25
[   22s] [46/95] keeping cpp-9.2.0-1.13
[   22s] [47/95] keeping gcc-c++-9.2.0-1.13
[   22s] [48/95] keeping binutils-2.33.1-1.23
[   22s] [49/95] keeping coreutils-6.9-1.7
[   22s] [50/95] keeping gawk-3.1.5-1.1
[   22s] [51/95] keeping grep-2.5.2-1.1
[   22s] [52/95] keeping libacl-2.2.53-1.38
[   22s] [53/95] keeping libcc1-9.2.0-1.13
[   22s] [54/95] keeping libelf-0.178-1.29
[   22s] [55/95] keeping libmount-2.37.4-1.1
[   22s] [56/95] keeping libubsan-9.2.0-1.13
[   22s] [57/95] keeping make-4.3-1.6
[   22s] [58/95] keeping nss-certs-3.34.1-1.23
[   22s] [59/95] keeping smack-1.3.1-1.27
[   22s] [60/95] keeping bzip2-1.0.8-1.41
[   22s] [61/95] keeping libfdisk-2.37.4-1.1
[   22s] [62/95] keeping libmagic-5.41-1.29
[   22s] [63/95] keeping libxml2-2.10.2-1.11
[   22s] [64/95] keeping perl-5.34.0-1.18
[   22s] [65/95] keeping xz-5.2.5-1.38
[   22s] [66/95] keeping build-mkbaselibs-20120927-1.1
[   22s] [67/95] keeping linux-glibc-devel-3.10-1.43
[   22s] [68/95] keeping autoconf-2.71-1.52
[   22s] [69/95] keeping file-5.41-1.29
[   22s] [70/95] keeping glibc-locale-2.30-1.14
[   22s] [71/95] keeping tar-1.17-1.1
[   22s] [72/95] keeping gzip-1.3.12-1.33
[   22s] [73/95] keeping libncurses6-6.2-1.25
[   22s] [74/95] keeping pam-1.1.6-1.1
[   22s] [75/95] keeping tzdata-2021e-1.1
[   22s] [76/95] keeping libdw-0.178-1.29
[   22s] [77/95] keeping libarchive-3.5.2-1.27
[   23s] [78/95] keeping gcc-9.2.0-1.13
[   23s] [79/95] keeping libncurses-6.2-1.25
[   23s] [80/95] keeping glibc-devel-2.30-1.14
[   23s] [81/95] keeping qemu-accel-x86_64-armv7l-0.4-2.1
[   23s] [82/95] keeping automake-1.16.4-1.34
[   23s] [83/95] keeping less-466-1.1
[   23s] [84/95] keeping libreadline-5.2-1.14
[   23s] [85/95] keeping libasm-0.178-1.29
[   23s] [86/95] keeping build-20120927-1.1
[   23s] [87/95] cumulate zlib-devel-1.2.11-1.40
[   23s] [88/95] keeping libtool-2.4.6-1.29
[   23s] [89/95] keeping elfutils-0.178-1.29
[   23s] [90/95] keeping util-linux-2.37.4-1.1
[   23s] [91/95] keeping util-linux-su-2.37.4-1.1
[   23s] [92/95] keeping nss-3.34.1-1.23
[   23s] [93/95] keeping libsoftokn3-3.34.1-1.23
[   23s] [94/95] keeping rpm-4.14.1.1-1.25
[   23s] [95/95] keeping rpm-build-4.14.1.1-1.25
[   23s] now installing cumulated packages
[   23s] Preparing...                          ########################################
[   23s] Updating / installing...
[   23s] zlib-devel-1.2.11-1.40                ########################################
[   23s] removing nis flags from /data/workspace/gbsbuild-ROOT/GBS-ROOT/local/BUILD-ROOTS/scratch.armv7l.12/etc/nsswitch.conf...
[   23s] now finalizing build dir...
[   25s] -----------------------------------------------------------------
[   25s] ----- building perl-PerlIO-gzip.spec (user abuild)
[   25s] -----------------------------------------------------------------
[   25s] -----------------------------------------------------------------
[   25s] + exec rpmbuild --define 'jobs 8' --define '_smp_mflags -j8' --define '_costomized_smp_mflags -j26' --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' -ba /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec
[   29s] Building target platforms: armv7l-tizen-linux
[   29s] Building for target armv7l-tizen-linux
[   29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.uvg5xg
[   29s] + umask 022
[   29s] + cd /home/abuild/rpmbuild/BUILD
[   29s] + cd /home/abuild/rpmbuild/BUILD
[   29s] + rm -rf perl-PerlIO-gzip-0.18
[   29s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz
[   29s] + /bin/tar -xof -
[   29s] + STATUS=0
[   29s] + '[' 0 -ne 0 ']'
[   29s] + cd perl-PerlIO-gzip-0.18
[   29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   29s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):'
[   29s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):
[   29s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[   29s] patching file Makefile.PL
[   29s] + exit 0
[   29s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.qpPJoj
[   29s] + umask 022
[   29s] + cd /home/abuild/rpmbuild/BUILD
[   29s] + cd perl-PerlIO-gzip-0.18
[   29s] ++ uname -m
[   29s] + [[ armv7l == \a\a\r\c\h\6\4 ]]
[   29s] + LANG=C
[   29s] + export LANG
[   29s] + unset DISPLAY
[   29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g'
[   29s] + export CFLAGS
[   29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g'
[   29s] + export CXXFLAGS
[   29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir'
[   29s] + export FFLAGS
[   29s] + LDFLAGS=
[   29s] + export LDFLAGS
[   29s] + perl Makefile.PL
[   30s] Checking if your kit is complete...
[   30s] Looks good
[   31s] Generating a Unix-style Makefile
[   31s] Writing Makefile for PerlIO::gzip
[   31s] Writing MYMETA.yml and MYMETA.json
[   31s] + make
[   36s] cp gzip.pm blib/lib/PerlIO/gzip.pm
[   36s] Running Mkbootstrap for gzip ()
[   36s] chmod 644 "gzip.bs"
[   36s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
[   37s] "/usr/bin/perl" "/usr/lib/perl5/5.34.0/ExtUtils/xsubpp"  -typemap '/usr/lib/perl5/5.34.0/ExtUtils/typemap'  gzip.xs > gzip.xsc
[   37s] mv gzip.xsc gzip.c
[   37s] cc -c   -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe   -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE"   gzip.c
[   38s] gzip.xs: In function 'PerlIOGzip_popped':
[   38s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=]
[   38s]   870 |     PerlIO_debug("PerlIOGzip_popped code=%d\n", code);
[   38s]       |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~  ~~~~
[   38s]       |                                                 |
[   38s]       |                                                 IV {aka long int}
[   38s] In file included from /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/perl.h:5744,
[   38s]                  from gzip.xs:13:
[   38s] gzip.xs: In function 'PerlIOGzip_getarg':
[   38s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/embed.h:384:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized]
[   38s]   384 | #define newSVpv(a,b)  Perl_newSVpv(aTHX_ a,b)
[   38s]       |                       ^~~~~~~~~~~~
[   38s] gzip.xs:675:24: note: 'mode' was declared here
[   38s]   675 |   register const char *mode;
[   38s]       |                        ^~~~
[   38s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so
[   38s] LD_RUN_PATH="/usr/lib" cc  -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib  gzip.o  -o blib/arch/auto/PerlIO/gzip/gzip.so  \
[   38s]    -lz   \
[   38s]   
[   38s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so
[   39s] Manifying 1 pod document
[   39s] + exit 0
[   39s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.HCBrgg
[   39s] + umask 022
[   39s] + cd /home/abuild/rpmbuild/BUILD
[   39s] + cd perl-PerlIO-gzip-0.18
[   39s] + LANG=C
[   39s] + export LANG
[   39s] + unset DISPLAY
[   39s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   39s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   39s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   39s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm install_vendor
[   40s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644
[   41s] Manifying 1 pod document
[   41s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
[   41s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so
[   41s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm
[   41s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/man/man3/PerlIO::gzip.3
[   41s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/info
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/doc/packages
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/doc/perl-PerlIO-gzip
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/doc/perl-PerlIO-gzip-0.18
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/gtk-doc
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/doc
[   42s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/man
[   42s] + xargs rm -f --
[   42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm -regex '.*/man/man./.*.[0-9]'
[   42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm -regex '.*/man/../man./.*.[0-9]'
[   42s] + xargs rm -f --
[   42s] + xargs rm -f --
[   42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm -regex '.*/man/man./.*.[0-9]pm'
[   42s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto
[   42s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0
[   42s] + xargs -0 -r rm
[   42s] + '[' armv7l == noarch ']'
[   42s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod
[   42s] + FILES=perl-PerlIO-gzip.files
[   42s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f
[   42s] + RES=
[   42s] + '[' -n '' ']'
[   42s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/
[   42s] ++ sort
[   42s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] + continue
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi
[   42s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}'
[   42s] + el=armv7l-linux-thread-multi
[   42s] + all_dir=(${all_dir[@]} $el)
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO
[   42s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}'
[   42s] + el=armv7l-linux-thread-multi/PerlIO
[   42s] + all_dir=(${all_dir[@]} $el)
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}'
[   42s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto
[   42s] + el=armv7l-linux-thread-multi/auto
[   42s] + all_dir=(${all_dir[@]} $el)
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO
[   42s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}'
[   42s] + el=armv7l-linux-thread-multi/auto/PerlIO
[   42s] + all_dir=(${all_dir[@]} $el)
[   42s] + for dir in '`find ${base_dir} -type d | sort`'
[   42s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']'
[   42s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip
[   42s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}'
[   42s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip
[   42s] + all_dir=(${all_dir[@]} $el)
[   42s] + for i in '${all_dir[@]}'
[   42s] + '[' armv7l-linux-thread-multi = auto ']'
[   42s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']'
[   42s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']'
[   42s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f
[   42s] + RES=
[   42s] + '[' -n '' ']'
[   42s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi
[   42s] + /bin/cat
[   43s] + for i in '${all_dir[@]}'
[   43s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']'
[   43s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']'
[   43s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO ']'
[   43s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f
[   43s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm
[   43s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']'
[   43s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO
[   43s] + /bin/cat
[   43s] + for file in '$RES'
[   43s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm
[   43s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm
[   43s] + /bin/cat
[   43s] + for i in '${all_dir[@]}'
[   43s] + '[' armv7l-linux-thread-multi/auto = auto ']'
[   43s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']'
[   43s] + continue
[   43s] + for i in '${all_dir[@]}'
[   43s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']'
[   43s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']'
[   43s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO ']'
[   43s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f
[   43s] + RES=
[   43s] + '[' -n '' ']'
[   43s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO
[   43s] + /bin/cat
[   43s] + for i in '${all_dir[@]}'
[   43s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']'
[   43s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']'
[   43s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']'
[   43s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f
[   43s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so
[   43s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']'
[   43s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip
[   43s] + /bin/cat
[   43s] + for file in '$RES'
[   43s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so
[   43s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so
[   43s] + /bin/cat
[   43s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/share/man ']'
[   43s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/var/adm/perl-modules/perl-PerlIO-gzip ']'
[   43s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/bin ']'
[   43s] + /usr/lib/rpm/find-debuginfo.sh -j8 --build-id-seed 0.18-1 --unique-debug-src-base perl-PerlIO-gzip-0.18-1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18
[   43s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so
[   43s] 158 blocks
[   44s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest
[   44s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest
[   44s] + /usr/lib/rpm/check-buildroot
[   44s] + /usr/lib/rpm//brp-compress
[   44s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[   44s] + /usr/lib/rpm/brp-python-hardlink
[   44s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   44s] Processing files: perl-PerlIO-gzip-0.18-1.armv7l
[   44s] Provides: perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-1 perl-PerlIO-gzip(armv7l-32) = 0.18-1
[   44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   44s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH)
[   44s] Processing files: perl-PerlIO-gzip-debugsource-0.18-1.armv7l
[   44s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   44s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   44s] 
[   44s] Provides: perl-PerlIO-gzip-debugsource = 0.18-1 perl-PerlIO-gzip-debugsource(armv7l-32) = 0.18-1
[   44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   44s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-1.armv7l
[   44s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[   44s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[   44s] 
[   44s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-1 perl-PerlIO-gzip-debuginfo(armv7l-32) = 0.18-1
[   44s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[   44s] Recommends: perl-PerlIO-gzip-debugsource(armv7l-32) = 0.18-1
[   44s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   44s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.src.rpm
[   45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-0.18-1.armv7l.rpm
[   45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debugsource-0.18-1.armv7l.rpm
[   45s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debuginfo-0.18-1.armv7l.rpm
[   45s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.eQwYfi
[   45s] + umask 022
[   45s] + cd /home/abuild/rpmbuild/BUILD
[   45s] + cd perl-PerlIO-gzip-0.18
[   45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   45s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.arm
[   45s] + exit 0
[   45s] ... checking for files with abuild user/group
[   45s] ... creating baselibs
[   46s] 
[   46s] qb_builder-0 finished "build perl-PerlIO-gzip.spec" at Mon Oct 31 22:43:42 UTC 2022.
[   46s]