[ 0s] Memory limit set to 71855026KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 1s] [ 1s] 763f3fd73db9 started "build libpciaccess.spec" at Fri Oct 6 04:05:39 UTC 2023. [ 1s] [ 1s] Building libpciaccess for project 'Tizen-Base-ASAN' repository 'standard' arch 'i586' srcmd5 'd4f55a0f31cd367faea6546b61610b8c' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/libpciaccess.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/libpciaccess.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/22/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/libpciaccess.spec build ... [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libstdc++... [ 2s] [8/41] preinstalling libasan... [ 2s] [9/41] preinstalling bash... [ 2s] [10/41] preinstalling findutils... [ 2s] [11/41] preinstalling grep... [ 2s] [12/41] preinstalling libattr... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 3s] [16/41] preinstalling liblua... [ 3s] [17/41] preinstalling liblzma... [ 3s] [18/41] preinstalling libpopt... [ 3s] [19/41] preinstalling libreadline... [ 3s] [20/41] preinstalling libsmack... [ 3s] [21/41] preinstalling libzstd1... [ 3s] [22/41] preinstalling nspr... [ 3s] [23/41] preinstalling sed... [ 3s] [24/41] preinstalling zlib... [ 3s] [25/41] preinstalling diffutils... [ 3s] [26/41] preinstalling libsqlite... [ 3s] [27/41] preinstalling asan-build-env... [ 3s] [28/41] preinstalling libacl... [ 3s] [29/41] preinstalling libelf... [ 3s] [30/41] preinstalling smack... [ 3s] [31/41] preinstalling bzip2... [ 3s] [32/41] preinstalling coreutils... [ 3s] [33/41] preinstalling libmagic... [ 3s] [34/41] preinstalling libxml2... [ 3s] [35/41] preinstalling util-linux... [ 3s] [36/41] preinstalling tar... [ 3s] [37/41] preinstalling util-linux-su... [ 3s] [38/41] preinstalling nss... [ 4s] [39/41] preinstalling libsoftokn3... [ 4s] [40/41] preinstalling rpm... [ 4s] [41/41] preinstalling asan-force-options... [ 4s] running setup postinstall script [ 4s] chroot: failed to run command '': No such file or directory [ 4s] running asan-force-options postinstall script [ 4s] /usr/bin [ 4s] grep: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory [ 4s] initializing rpm db... [ 5s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 5s] breaking dependency libasan -> glibc [ 5s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 5s] breaking dependency libasan -> libgcc [ 5s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 5s] breaking dependency libstdc++ -> glibc [ 5s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 5s] breaking dependency setup -> asan-runtime-env [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] done [ 5s] querying package ids... [ 5s] [1/101] cumulate libmagic-data-5.44-1.17 [ 5s] [2/101] cumulate setup-0.9-1.4 [ 5s] [3/101] cumulate filesystem-3.1-1.2 [ 5s] [4/101] cumulate glibc-2.30-1.9 [ 5s] [5/101] cumulate libatomic-9.2.0-1.14 [ 5s] [6/101] cumulate libgcc-9.2.0-1.14 [ 5s] [7/101] cumulate libgomp-9.2.0-1.14 [ 5s] [8/101] cumulate libitm-9.2.0-1.14 [ 5s] [9/101] cumulate libquadmath-9.2.0-1.14 [ 5s] [10/101] cumulate libstdc++-9.2.0-1.14 [ 5s] [11/101] cumulate libgfortran-9.2.0-1.14 [ 5s] [12/101] cumulate libstdc++-devel-9.2.0-1.14 [ 5s] [13/101] cumulate binutils-2.33.1-1.17 [ 5s] [14/101] cumulate libasan-9.2.0-1.14 [ 5s] [15/101] cumulate libcc1-9.2.0-1.14 [ 5s] [16/101] cumulate libubsan-9.2.0-1.14 [ 5s] [17/101] cumulate asan-runtime-env-9.2.0-2.8 [ 5s] [18/101] cumulate bash-3.2.57-1.6 [ 5s] [19/101] cumulate cpio-2.8-1.3 [ 5s] [20/101] cumulate findutils-4.3.8-1.17 [ 5s] [21/101] cumulate gdbm-1.8.3-1.19 [ 5s] [22/101] cumulate hostname-3.23-1.3 [ 5s] [23/101] cumulate libattr-2.5.1-1.18 [ 5s] [24/101] cumulate libblkid-2.37.4-1.5 [ 5s] [25/101] cumulate libbz2-1.0.8-1.17 [ 5s] [26/101] cumulate libcap-2.24-1.17 [ 5s] [27/101] cumulate libext2fs-1.46.0-1.17 [ 5s] [28/101] cumulate libfreebl3-3.87-2.5 [ 5s] [29/101] cumulate libltdl-2.4.7-1.19 [ 5s] [30/101] cumulate liblua-5.1.5-1.16 [ 5s] [31/101] cumulate liblzma-5.4.0-1.19 [ 5s] [32/101] cumulate libpcre-8.45-1.8 [ 5s] [33/101] cumulate libpopt-1.16-1.16 [ 5s] [34/101] cumulate libsmack-1.3.1-1.16 [ 5s] [35/101] cumulate libsmartcols-2.37.4-1.5 [ 5s] [36/101] cumulate libuuid-2.37.4-1.5 [ 5s] [37/101] cumulate libzstd1-1.5.2-1.16 [ 5s] [38/101] cumulate m4-1.4.19-1.3 [ 5s] [39/101] cumulate net-tools-2.0_20121208git-1.3 [ 5s] [40/101] cumulate nspr-4.35-1.16 [ 5s] [41/101] cumulate patch-2.7.6-1.16 [ 5s] [42/101] cumulate pkg-config-0.29.2-1.16 [ 5s] [43/101] cumulate sed-4.1c-1.3 [ 5s] [44/101] cumulate update-alternatives-1.21.18-1.3 [ 5s] [45/101] cumulate which-2.17-1.3 [ 5s] [46/101] cumulate zlib-1.2.13-1.17 [ 5s] [47/101] cumulate diffutils-3.8-1.3 [ 5s] [48/101] cumulate libopenssl11-1.1.1u-1.19 [ 5s] [49/101] cumulate libsqlite-3.40.1-1.16 [ 5s] [50/101] cumulate build-compare-2015.04.28-1.9 [ 5s] [51/101] cumulate util-macros-1.19.0-1.2 [ 5s] [52/101] cumulate asan-build-env-9.2.0-2.8 [ 5s] [53/101] cumulate cpp-9.2.0-1.14 [ 5s] [54/101] cumulate gcc-c++-9.2.0-1.14 [ 5s] [55/101] cumulate gawk-3.1.5-1.3 [ 5s] [56/101] cumulate grep-2.5.2-1.2 [ 5s] [57/101] cumulate libacl-2.2.53-1.18 [ 5s] [58/101] cumulate libelf-0.189-1.19 [ 5s] [59/101] cumulate libmount-2.37.4-1.5 [ 5s] [60/101] cumulate nss-certs-3.87-2.5 [ 5s] [61/101] cumulate smack-1.3.1-1.16 [ 5s] [62/101] cumulate bzip2-1.0.8-1.17 [ 5s] [63/101] cumulate coreutils-6.9-14.9 [ 5s] [64/101] cumulate libfdisk-2.37.4-1.5 [ 5s] [65/101] cumulate libmagic-5.44-1.17 [ 5s] [66/101] cumulate libxml2-2.10.2-1.16 [ 5s] [67/101] cumulate make-4.3-1.16 [ 5s] [68/101] cumulate xz-5.4.0-1.19 [ 5s] [69/101] cumulate perl-5.34.0-1.15 [ 5s] [70/101] cumulate gcc-9.2.0-1.14 [ 5s] [71/101] cumulate build-mkbaselibs-20120927-1.2 [ 5s] [72/101] cumulate linux-glibc-devel-3.10-1.19 [ 5s] [73/101] cumulate terminfo-base-full-6.2-1.19 [ 5s] [74/101] cumulate autoconf-2.71-1.19 [ 5s] [75/101] cumulate file-5.44-1.17 [ 5s] [76/101] cumulate glibc-locale-2.30-1.9 [ 5s] [77/101] cumulate tar-1.17-1.2 [ 5s] [78/101] cumulate gzip-1.3.12-1.17 [ 5s] [79/101] cumulate pam-1.1.6-1.2 [ 5s] [80/101] cumulate tzdata-2023c-1.3 [ 5s] [81/101] cumulate libdw-0.189-1.19 [ 5s] [82/101] cumulate nss-3.87-2.5 [ 5s] [83/101] cumulate libarchive-3.6.2-1.19 [ 5s] [84/101] cumulate glibc-devel-2.30-1.9 [ 5s] [85/101] cumulate automake-1.16.5-1.19 [ 5s] [86/101] cumulate libasm-0.189-1.19 [ 5s] [87/101] cumulate build-20120927-1.2 [ 5s] [88/101] cumulate libncurses6-6.2-1.19 [ 5s] [89/101] cumulate libsoftokn3-3.87-2.5 [ 5s] [90/101] cumulate rpm-4.14.1.1-1.18 [ 5s] [91/101] cumulate libncurses-6.2-1.19 [ 5s] [92/101] cumulate less-608-1.3 [ 5s] [93/101] cumulate libreadline-5.2-1.16 [ 5s] [94/101] cumulate zlib-devel-1.2.13-1.17 [ 5s] [95/101] cumulate asan-force-options-9.2.0-2.8 [ 5s] [96/101] cumulate procps-ng-3.3.17-1.3 [ 5s] [97/101] cumulate libtool-2.4.7-1.19 [ 5s] [98/101] cumulate elfutils-0.189-1.19 [ 5s] [99/101] cumulate rpm-build-4.14.1.1-1.18 [ 5s] [100/101] cumulate util-linux-2.37.4-1.5 [ 5s] [101/101] cumulate util-linux-su-2.37.4-1.5 [ 5s] now installing cumulated packages [ 6s] Preparing... ######################################## [ 6s] Updating / installing... [ 6s] asan-runtime-env-9.2.0-2.8 ######################################## [ 6s] setup-0.9-1.4 ######################################## [ 6s] filesystem-3.1-1.2 ######################################## [ 6s] glibc-2.30-1.9 ######################################## [ 6s] libgcc-9.2.0-1.14 ######################################## [ 6s] libstdc++-9.2.0-1.14 ######################################## [ 7s] libasan-9.2.0-1.14 ######################################## [ 7s] libmagic-data-5.44-1.17 ######################################## [ 7s] bash-3.2.57-1.6 ######################################## [ 7s] zlib-1.2.13-1.17 ######################################## [ 8s] coreutils-6.9-14.9 ######################################## [ 8s] libbz2-1.0.8-1.17 ######################################## [ 8s] liblzma-5.4.0-1.19 ######################################## [ 8s] libelf-0.189-1.19 ######################################## [ 8s] libdw-0.189-1.19 ######################################## [ 9s] libmagic-5.44-1.17 ######################################## [ 9s] libblkid-2.37.4-1.5 ######################################## [ 9s] nspr-4.35-1.16 ######################################## [ 9s] pam-1.1.6-1.2 ######################################## [ 9s] libcap-2.24-1.17 ######################################## [ 10s] libfreebl3-3.87-2.5 ######################################## [ 10s] liblua-5.1.5-1.16 ######################################## [ 10s] libpopt-1.16-1.16 ######################################## [ 10s] libuuid-2.37.4-1.5 ######################################## [ 10s] libzstd1-1.5.2-1.16 ######################################## [ 10s] pkg-config-0.29.2-1.16 ######################################## [ 11s] binutils-2.33.1-1.17 ######################################## [ 11s] libquadmath-9.2.0-1.14 ######################################## [ 11s] linux-glibc-devel-3.10-1.19 ######################################## [ 11s] terminfo-base-full-6.2-1.19 ######################################## [ 11s] libncurses6-6.2-1.19 ######################################## [ 12s] glibc-devel-2.30-1.9 ######################################## [ 12s] libreadline-5.2-1.16 ######################################## [ 12s] libgfortran-9.2.0-1.14 ######################################## [ 12s] libfdisk-2.37.4-1.5 ######################################## [ 12s] nss-certs-3.87-2.5 ######################################## [ 12s] libmount-2.37.4-1.5 ######################################## [ 12s] libasm-0.189-1.19 ######################################## [ 12s] libxml2-2.10.2-1.16 ######################################## [ 13s] xz-5.4.0-1.19 ######################################## [ 13s] bzip2-1.0.8-1.17 ######################################## [ 13s] gzip-1.3.12-1.17 ######################################## [ 13s] make-4.3-1.16 ######################################## [ 13s] findutils-4.3.8-1.17 ######################################## [ 13s] gdbm-1.8.3-1.19 ######################################## [ 14s] perl-5.34.0-1.15 ######################################## [ 14s] build-mkbaselibs-20120927-1.2 ######################################## [ 14s] libattr-2.5.1-1.18 ######################################## [ 14s] libacl-2.2.53-1.18 ######################################## [ 15s] tar-1.17-1.2 ######################################## [ 15s] libltdl-2.4.7-1.19 ######################################## [ 15s] libpcre-8.45-1.8 ######################################## [ 15s] libsmack-1.3.1-1.16 ######################################## [ 15s] libsmartcols-2.37.4-1.5 ######################################## [ 15s] m4-1.4.19-1.3 ######################################## [ 15s] autoconf-2.71-1.19 ######################################## [ 16s] automake-1.16.5-1.19 ######################################## [ 16s] patch-2.7.6-1.16 ######################################## [ 16s] sed-4.1c-1.3 ######################################## [ 17s] util-linux-2.37.4-1.5 ######################################## [ 17s] libopenssl11-1.1.1u-1.19 ######################################## [ 17s] libarchive-3.6.2-1.19 ######################################## [ 17s] libsqlite-3.40.1-1.16 ######################################## [ 18s] libsoftokn3-3.87-2.5 ######################################## [ 18s] nss-3.87-2.5 ######################################## [ 20s] rpm-4.14.1.1-1.18 ######################################## [ 20s] libcc1-9.2.0-1.14 ######################################## [ 20s] libubsan-9.2.0-1.14 ######################################## [ 20s] libatomic-9.2.0-1.14 ######################################## [ 21s] libgomp-9.2.0-1.14 ######################################## [ 21s] libitm-9.2.0-1.14 ######################################## [ 21s] libtool-2.4.7-1.19 ######################################## [ 21s] build-20120927-1.2 ######################################## [ 21s] zlib-devel-1.2.13-1.17 ######################################## [ 21s] libncurses-6.2-1.19 ######################################## [ 21s] util-macros-1.19.0-1.2 ######################################## [ 21s] build-compare-2015.04.28-1.9 ######################################## [ 21s] asan-build-env-9.2.0-2.8 ######################################## [ 21s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 21s] libstdc++-devel-9.2.0-1.14 ######################################## [ 22s] gcc-9.2.0-1.14 ######################################## [ 22s] asan-force-options-9.2.0-2.8 ######################################## [ 22s] /usr/bin [ 22s] rpm-build-4.14.1.1-1.18 ######################################## [ 22s] util-linux-su-2.37.4-1.5 ######################################## [ 22s] smack-1.3.1-1.16 ######################################## [ 22s] grep-2.5.2-1.2 ######################################## [ 22s] elfutils-0.189-1.19 ######################################## [ 22s] less-608-1.3 ######################################## [ 22s] procps-ng-3.3.17-1.3 ######################################## [ 23s] file-5.44-1.17 ######################################## [ 23s] glibc-locale-2.30-1.9 ######################################## [ 23s] tzdata-2023c-1.3 ######################################## [ 24s] cpp-9.2.0-1.14 ######################################## [ 24s] gcc-c++-9.2.0-1.14 ######################################## [ 24s] gawk-3.1.5-1.3 ######################################## [ 24s] cpio-2.8-1.3 ######################################## [ 24s] hostname-3.23-1.3 ######################################## [ 24s] libext2fs-1.46.0-1.17 ######################################## [ 24s] net-tools-2.0_20121208git-1.3 ######################################## [ 24s] update-alternatives-1.21.18-1.3 ######################################## [ 24s] which-2.17-1.3 ######################################## [ 24s] diffutils-3.8-1.3 ######################################## [ 24s] now finalizing build dir... [ 25s] ----------------------------------------------------------------- [ 25s] I have the following modifications for libpciaccess.spec: [ 25s] 6c6 [ 25s] < Release: 0 [ 25s] --- [ 25s] > Release: 1.3 [ 25s] 84a85 [ 25s] > %changelog [ 25s] build target is i686-tizen-linux [ 25s] ----------------------------------------------------------------- [ 25s] ----- building libpciaccess.spec (user abuild) [ 25s] ----------------------------------------------------------------- [ 25s] ----------------------------------------------------------------- [ 25s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 25s] Building target platforms: i686-tizen-linux [ 25s] Building for target i686-tizen-linux [ 25s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.GIOvZT [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + rm -rf libpciaccess-0.13.2 [ 25s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 25s] + /bin/tar -xof - [ 25s] + STATUS=0 [ 25s] + '[' 0 -ne 0 ']' [ 25s] + cd libpciaccess-0.13.2 [ 25s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 25s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 25s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 25s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 25s] patching file src/Makefile.am [ 25s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 25s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 25s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 25s] patching file src/common_bridge.c [ 25s] patching file src/linux_sysfs.c [ 25s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 25s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 25s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 25s] patching file src/linux_sysfs.c [ 25s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 25s] + exit 0 [ 25s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.R0zMCT [ 25s] + umask 022 [ 25s] + cd /home/abuild/rpmbuild/BUILD [ 25s] + cd libpciaccess-0.13.2 [ 25s] ++ uname -m [ 25s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 25s] + LANG=C [ 25s] + export LANG [ 25s] + unset DISPLAY [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + LDFLAGS= [ 25s] + export LDFLAGS [ 25s] + NOCONFIGURE=1 [ 25s] + AR=gcc-ar [ 25s] + export AR [ 25s] + NM=/bin/nm [ 25s] + export NM [ 25s] + RANLIB=gcc-ranlib [ 25s] + export RANLIB [ 25s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 25s] + export CFLAGS [ 25s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 25s] + export CXXFLAGS [ 25s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 25s] + export FFLAGS [ 25s] + ./autogen.sh --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 25s] autoreconf: export WARNINGS= [ 25s] autoreconf: Entering directory '.' [ 25s] autoreconf: configure.ac: not using Gettext [ 26s] autoreconf: running: aclocal -I m4 [ 29s] autoreconf: configure.ac: tracing [ 30s] autoreconf: running: libtoolize --copy [ 30s] libtoolize: putting auxiliary files in '.'. [ 30s] libtoolize: copying file './ltmain.sh' [ 31s] libtoolize: putting macros in 'm4'. [ 31s] libtoolize: copying file 'm4/libtool.m4' [ 31s] libtoolize: copying file 'm4/ltoptions.m4' [ 31s] libtoolize: copying file 'm4/ltsugar.m4' [ 31s] libtoolize: copying file 'm4/ltversion.m4' [ 31s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 31s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 31s] libtoolize: and rerunning libtoolize and aclocal. [ 31s] autoreconf: configure.ac: not using Intltool [ 31s] autoreconf: configure.ac: not using Gtkdoc [ 31s] autoreconf: running: aclocal -I m4 [ 33s] autoreconf: running: /usr/bin/autoconf [ 35s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 35s] configure.ac:36: You should run autoupdate. [ 35s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 35s] configure.ac:36: the top level [ 35s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 35s] configure.ac:42: You should run autoupdate. [ 35s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 35s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 35s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 35s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 35s] configure.ac:42: the top level [ 36s] autoreconf: running: /usr/bin/autoheader [ 38s] autoreconf: running: automake --add-missing --copy --no-force [ 39s] configure.ac:33: installing './compile' [ 39s] configure.ac:36: installing './config.guess' [ 39s] configure.ac:36: installing './config.sub' [ 39s] configure.ac:32: installing './install-sh' [ 39s] configure.ac:32: installing './missing' [ 40s] scanpci/Makefile.am: installing './depcomp' [ 40s] autoreconf: Leaving directory '.' [ 40s] checking for a BSD-compatible install... /bin/install -c [ 40s] checking whether build environment is sane... yes [ 40s] checking for a race-free mkdir -p... /bin/mkdir -p [ 40s] checking for gawk... gawk [ 40s] checking whether make sets $(MAKE)... yes [ 40s] checking whether make supports nested variables... yes [ 40s] checking whether make supports the include directive... yes (GNU style) [ 40s] checking for i686-tizen-linux-gnu-gcc... no [ 40s] checking for gcc... gcc [ 41s] checking whether the C compiler works... yes [ 41s] checking for C compiler default output file name... a.out [ 41s] checking for suffix of executables... [ 41s] checking whether we are cross compiling... no [ 41s] checking for suffix of object files... o [ 41s] checking whether the compiler supports GNU C... yes [ 42s] checking whether gcc accepts -g... yes [ 42s] checking for gcc option to enable C11 features... none needed [ 42s] checking whether gcc understands -c and -o together... yes [ 42s] checking dependency style of gcc... gcc3 [ 42s] checking for stdio.h... yes [ 42s] checking for stdlib.h... yes [ 42s] checking for string.h... yes [ 42s] checking for inttypes.h... yes [ 43s] checking for stdint.h... yes [ 43s] checking for strings.h... yes [ 43s] checking for sys/stat.h... yes [ 43s] checking for sys/types.h... yes [ 43s] checking for unistd.h... yes [ 43s] checking for wchar.h... yes [ 43s] checking for minix/config.h... no [ 43s] checking whether it is safe to define __EXTENSIONS__... yes [ 43s] checking whether _XOPEN_SOURCE should be defined... no [ 43s] checking build system type... i686-tizen-linux-gnu [ 43s] checking host system type... i686-tizen-linux-gnu [ 43s] checking how to print strings... printf [ 43s] checking for a sed that does not truncate output... /bin/sed [ 43s] checking for grep that handles long lines and -e... /bin/grep [ 43s] checking for egrep... /bin/grep -E [ 43s] checking for fgrep... /bin/grep -F [ 44s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 44s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 44s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 44s] checking the name lister (/bin/nm) interface... BSD nm [ 44s] checking whether ln -s works... yes [ 44s] checking the maximum length of command line arguments... 1572864 [ 44s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 44s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 44s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 44s] checking for i686-tizen-linux-gnu-file... no [ 44s] checking for file... file [ 44s] checking for i686-tizen-linux-gnu-objdump... no [ 44s] checking for objdump... objdump [ 44s] checking how to recognize dependent libraries... pass_all [ 44s] checking for i686-tizen-linux-gnu-dlltool... no [ 44s] checking for dlltool... no [ 44s] checking how to associate runtime and link libraries... printf %s\n [ 44s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 44s] checking for archiver @FILE support... @ [ 44s] checking for i686-tizen-linux-gnu-strip... no [ 44s] checking for strip... strip [ 44s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 44s] checking command to parse /bin/nm output from gcc object... ok [ 44s] checking for sysroot... no [ 44s] checking for a working dd... /bin/dd [ 44s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 44s] checking for i686-tizen-linux-gnu-mt... no [ 44s] checking for mt... no [ 44s] checking if : is a manifest tool... no [ 44s] checking for dlfcn.h... yes [ 44s] checking for objdir... .libs [ 45s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 45s] checking for gcc option to produce PIC... -fPIC -DPIC [ 45s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 45s] checking if gcc static flag -static works... no [ 45s] checking if gcc supports -c -o file.o... yes [ 45s] checking if gcc supports -c -o file.o... (cached) yes [ 45s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 45s] checking whether -lc should be explicitly linked in... no [ 46s] checking dynamic linker characteristics... GNU/Linux ld.so [ 46s] checking how to hardcode library paths into programs... immediate [ 46s] checking whether stripping libraries is possible... yes [ 46s] checking if libtool supports shared libraries... yes [ 46s] checking whether to build shared libraries... yes [ 46s] checking whether to build static libraries... yes [ 46s] checking for gcc options needed to detect all undeclared functions... none needed [ 46s] checking whether __clang__ is declared... no [ 46s] checking whether __INTEL_COMPILER is declared... no [ 47s] checking whether __SUNPRO_C is declared... no [ 47s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 47s] checking pkg-config is at least version 0.9.0... yes [ 47s] checking if gcc supports -Werror=unknown-warning-option... no [ 47s] checking if gcc supports -Werror=unused-command-line-argument... no [ 47s] checking if gcc supports -Wall... yes [ 47s] checking if gcc supports -Wpointer-arith... yes [ 47s] checking if gcc supports -Wmissing-declarations... yes [ 48s] checking if gcc supports -Wformat=2... yes [ 48s] checking if gcc supports -Wstrict-prototypes... yes [ 48s] checking if gcc supports -Wmissing-prototypes... yes [ 48s] checking if gcc supports -Wnested-externs... yes [ 49s] checking if gcc supports -Wbad-function-cast... yes [ 49s] checking if gcc supports -Wold-style-definition... yes [ 49s] checking if gcc supports -Wdeclaration-after-statement... yes [ 50s] checking if gcc supports -Wunused... yes [ 50s] checking if gcc supports -Wuninitialized... yes [ 50s] checking if gcc supports -Wshadow... yes [ 50s] checking if gcc supports -Wmissing-noreturn... yes [ 51s] checking if gcc supports -Wmissing-format-attribute... yes [ 51s] checking if gcc supports -Wredundant-decls... yes [ 52s] checking if gcc supports -Wlogical-op... yes [ 52s] checking if gcc supports -Werror=implicit... yes [ 52s] checking if gcc supports -Werror=nonnull... yes [ 53s] checking if gcc supports -Werror=init-self... yes [ 53s] checking if gcc supports -Werror=main... yes [ 54s] checking if gcc supports -Werror=missing-braces... yes [ 54s] checking if gcc supports -Werror=sequence-point... yes [ 55s] checking if gcc supports -Werror=return-type... yes [ 55s] checking if gcc supports -Werror=trigraphs... yes [ 56s] checking if gcc supports -Werror=array-bounds... yes [ 56s] checking if gcc supports -Werror=write-strings... yes [ 57s] checking if gcc supports -Werror=address... yes [ 57s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 57s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 58s] checking if gcc supports -pedantic... yes [ 58s] checking if gcc supports -Werror... yes [ 59s] checking if gcc supports -Werror=attributes... yes [ 59s] checking whether make supports nested variables... (cached) yes [ 59s] checking for special C compiler options needed for large files... no [ 59s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 60s] checking for err.h... yes [ 60s] checking for asm/mtrr.h... yes [ 60s] checking for struct pci_io.pi_sel.pc_domain... no [ 61s] checking that generated files are newer than configure... done [ 61s] configure: creating ./config.status [ 68s] config.status: creating Makefile [ 68s] config.status: creating include/Makefile [ 68s] config.status: creating man/Makefile [ 68s] config.status: creating src/Makefile [ 68s] config.status: creating scanpci/Makefile [ 69s] config.status: creating pciaccess.pc [ 69s] config.status: creating config.h [ 69s] config.status: executing depfiles commands [ 70s] config.status: executing libtool commands [ 71s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 71s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 71s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 71s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 71s] + AR=gcc-ar [ 71s] + export AR [ 71s] + NM=/bin/nm [ 71s] + export NM [ 71s] + RANLIB=gcc-ranlib [ 71s] + export RANLIB [ 71s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 71s] + export CFLAGS [ 71s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 71s] + export CXXFLAGS [ 71s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 71s] + export FFLAGS [ 71s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 73s] checking for a BSD-compatible install... /bin/install -c [ 73s] checking whether build environment is sane... yes [ 73s] checking for a race-free mkdir -p... /bin/mkdir -p [ 73s] checking for gawk... gawk [ 73s] checking whether make sets $(MAKE)... yes [ 73s] checking whether make supports nested variables... yes [ 73s] checking whether make supports the include directive... yes (GNU style) [ 73s] checking for i686-tizen-linux-gnu-gcc... no [ 73s] checking for gcc... gcc [ 74s] checking whether the C compiler works... yes [ 74s] checking for C compiler default output file name... a.out [ 75s] checking for suffix of executables... [ 75s] checking whether we are cross compiling... no [ 75s] checking for suffix of object files... o [ 76s] checking whether the compiler supports GNU C... yes [ 76s] checking whether gcc accepts -g... yes [ 76s] checking for gcc option to enable C11 features... none needed [ 76s] checking whether gcc understands -c and -o together... yes [ 77s] checking dependency style of gcc... gcc3 [ 77s] checking for stdio.h... yes [ 77s] checking for stdlib.h... yes [ 77s] checking for string.h... yes [ 77s] checking for inttypes.h... yes [ 77s] checking for stdint.h... yes [ 78s] checking for strings.h... yes [ 78s] checking for sys/stat.h... yes [ 78s] checking for sys/types.h... yes [ 78s] checking for unistd.h... yes [ 78s] checking for wchar.h... yes [ 78s] checking for minix/config.h... no [ 79s] checking whether it is safe to define __EXTENSIONS__... yes [ 79s] checking whether _XOPEN_SOURCE should be defined... no [ 79s] checking build system type... i686-tizen-linux-gnu [ 79s] checking host system type... i686-tizen-linux-gnu [ 79s] checking how to print strings... printf [ 79s] checking for a sed that does not truncate output... /bin/sed [ 79s] checking for grep that handles long lines and -e... /bin/grep [ 79s] checking for egrep... /bin/grep -E [ 79s] checking for fgrep... /bin/grep -F [ 79s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 79s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 79s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 79s] checking the name lister (/bin/nm) interface... BSD nm [ 79s] checking whether ln -s works... yes [ 79s] checking the maximum length of command line arguments... 1572864 [ 79s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 79s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 79s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 79s] checking for i686-tizen-linux-gnu-file... no [ 79s] checking for file... file [ 79s] checking for i686-tizen-linux-gnu-objdump... no [ 79s] checking for objdump... objdump [ 79s] checking how to recognize dependent libraries... pass_all [ 79s] checking for i686-tizen-linux-gnu-dlltool... no [ 79s] checking for dlltool... no [ 79s] checking how to associate runtime and link libraries... printf %s\n [ 79s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 80s] checking for archiver @FILE support... @ [ 80s] checking for i686-tizen-linux-gnu-strip... no [ 80s] checking for strip... strip [ 80s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 80s] checking command to parse /bin/nm output from gcc object... ok [ 80s] checking for sysroot... no [ 80s] checking for a working dd... /bin/dd [ 81s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 81s] checking for i686-tizen-linux-gnu-mt... no [ 81s] checking for mt... no [ 81s] checking if : is a manifest tool... no [ 81s] checking for dlfcn.h... yes [ 81s] checking for objdir... .libs [ 81s] checking if gcc supports -fno-rtti -fno-exceptions... yes [ 81s] checking for gcc option to produce PIC... -fPIC -DPIC [ 81s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 82s] checking if gcc static flag -static works... no [ 82s] checking if gcc supports -c -o file.o... yes [ 82s] checking if gcc supports -c -o file.o... (cached) yes [ 82s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 82s] checking whether -lc should be explicitly linked in... no [ 83s] checking dynamic linker characteristics... GNU/Linux ld.so [ 83s] checking how to hardcode library paths into programs... immediate [ 83s] checking whether stripping libraries is possible... yes [ 83s] checking if libtool supports shared libraries... yes [ 83s] checking whether to build shared libraries... yes [ 83s] checking whether to build static libraries... no [ 83s] checking for gcc options needed to detect all undeclared functions... none needed [ 83s] checking whether __clang__ is declared... no [ 83s] checking whether __INTEL_COMPILER is declared... no [ 84s] checking whether __SUNPRO_C is declared... no [ 84s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 84s] checking pkg-config is at least version 0.9.0... yes [ 84s] checking if gcc supports -Werror=unknown-warning-option... no [ 84s] checking if gcc supports -Werror=unused-command-line-argument... no [ 85s] checking if gcc supports -Wall... yes [ 85s] checking if gcc supports -Wpointer-arith... yes [ 86s] checking if gcc supports -Wmissing-declarations... yes [ 86s] checking if gcc supports -Wformat=2... yes [ 86s] checking if gcc supports -Wstrict-prototypes... yes [ 87s] checking if gcc supports -Wmissing-prototypes... yes [ 87s] checking if gcc supports -Wnested-externs... yes [ 87s] checking if gcc supports -Wbad-function-cast... yes [ 88s] checking if gcc supports -Wold-style-definition... yes [ 88s] checking if gcc supports -Wdeclaration-after-statement... yes [ 89s] checking if gcc supports -Wunused... yes [ 89s] checking if gcc supports -Wuninitialized... yes [ 90s] checking if gcc supports -Wshadow... yes [ 90s] checking if gcc supports -Wmissing-noreturn... yes [ 91s] checking if gcc supports -Wmissing-format-attribute... yes [ 91s] checking if gcc supports -Wredundant-decls... yes [ 92s] checking if gcc supports -Wlogical-op... yes [ 92s] checking if gcc supports -Werror=implicit... yes [ 93s] checking if gcc supports -Werror=nonnull... yes [ 93s] checking if gcc supports -Werror=init-self... yes [ 93s] checking if gcc supports -Werror=main... yes [ 94s] checking if gcc supports -Werror=missing-braces... yes [ 94s] checking if gcc supports -Werror=sequence-point... yes [ 94s] checking if gcc supports -Werror=return-type... yes [ 95s] checking if gcc supports -Werror=trigraphs... yes [ 95s] checking if gcc supports -Werror=array-bounds... yes [ 96s] checking if gcc supports -Werror=write-strings... yes [ 96s] checking if gcc supports -Werror=address... yes [ 96s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 97s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 97s] checking if gcc supports -pedantic... yes [ 97s] checking if gcc supports -Werror... yes [ 98s] checking if gcc supports -Werror=attributes... yes [ 98s] checking whether make supports nested variables... (cached) yes [ 98s] checking for gzopen in -lz... yes [ 98s] checking for zlib.h... yes [ 98s] checking for special C compiler options needed for large files... no [ 98s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 98s] checking for err.h... yes [ 99s] checking for asm/mtrr.h... yes [ 99s] checking for struct pci_io.pi_sel.pc_domain... no [ 99s] checking that generated files are newer than configure... done [ 99s] configure: creating ./config.status [ 101s] config.status: creating Makefile [ 101s] config.status: creating include/Makefile [ 101s] config.status: creating man/Makefile [ 101s] config.status: creating src/Makefile [ 101s] config.status: creating scanpci/Makefile [ 102s] config.status: creating pciaccess.pc [ 102s] config.status: creating config.h [ 102s] config.status: executing depfiles commands [ 102s] config.status: executing libtool commands [ 102s] + make -j12 [ 102s] make all-recursive [ 102s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 102s] Making all in include [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 102s] make[2]: Nothing to be done for 'all'. [ 102s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 102s] Making all in man [ 102s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 102s] GEN scanpci.1 [ 103s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 103s] Making all in src [ 103s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 103s] CC common_bridge.lo [ 103s] CC common_iterator.lo [ 103s] CC common_init.lo [ 103s] CC common_interface.lo [ 103s] CC common_io.lo [ 103s] CC common_capability.lo [ 103s] CC common_device_name.lo [ 103s] CC common_map.lo [ 103s] CC common_vgaarb.lo [ 103s] CC linux_sysfs.lo [ 103s] CC linux_devmem.lo [ 104s] CCLD libpciaccess.la [ 105s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 105s] Making all in scanpci [ 105s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 105s] CC scanpci.o [ 105s] CCLD scanpci [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 106s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 106s] + exit 0 [ 106s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.5pgzrS [ 106s] + umask 022 [ 106s] + cd /home/abuild/rpmbuild/BUILD [ 106s] + cd libpciaccess-0.13.2 [ 106s] + LANG=C [ 106s] + export LANG [ 106s] + unset DISPLAY [ 106s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 106s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 106s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 106s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 install [ 106s] Making install in include [ 106s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 106s] make[2]: Nothing to be done for 'install-exec-am'. [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/include' [ 106s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/include' [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 106s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 106s] Making install in man [ 106s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 106s] make[2]: Nothing to be done for 'install-exec-am'. [ 106s] make[2]: Nothing to be done for 'install-data-am'. [ 106s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 106s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 106s] Making install in src [ 106s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 106s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 106s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib' [ 106s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib' [ 107s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib/libpciaccess.so.0.13.2 [ 107s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 107s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 107s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib/libpciaccess.la [ 107s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 107s] make[2]: Nothing to be done for 'install-data-am'. [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 107s] Making install in scanpci [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 107s] make[2]: Nothing to be done for 'install-exec-am'. [ 107s] make[2]: Nothing to be done for 'install-data-am'. [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 107s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 107s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 107s] make[2]: Nothing to be done for 'install-exec-am'. [ 107s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib/pkgconfig' [ 107s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib/pkgconfig' [ 107s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 107s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 107s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/info/dir [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 -regex '.*\.la$' [ 107s] + xargs rm -f -- [ 107s] + xargs rm -f -- [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 -regex '.*\.a$' [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/info [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/doc/packages [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/doc/libpciaccess [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/doc/libpciaccess-0.13.2 [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/gtk-doc [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/doc [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/man [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 -regex '.*/man/man./.*.[0-9]' [ 107s] + xargs rm -f -- [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 -regex '.*/man/../man./.*.[0-9]' [ 107s] + xargs rm -f -- [ 107s] + xargs rm -f -- [ 107s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 -regex '.*/man/man./.*.[0-9]pm' [ 107s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.3 --unique-debug-src-base libpciaccess-0.13.2-1.3.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 107s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/lib/libpciaccess.so.0.13.2 [ 108s] 235 blocks [ 108s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 108s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 108s] + /usr/lib/rpm/check-buildroot [ 108s] + /usr/lib/rpm//brp-compress [ 108s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 108s] + /usr/lib/rpm/brp-python-hardlink [ 108s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 108s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 108s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 108s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 108s] Processing files: libpciaccess-0.13.2-1.3.i686 [ 108s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 108s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 108s] [ 108s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.yqXuTT [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd libpciaccess-0.13.2 [ 108s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess [ 108s] + export LC_ALL=C [ 108s] + LC_ALL=C [ 108s] + export LICENSEDIR [ 108s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess [ 108s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess [ 108s] + exit 0 [ 108s] Provides: libpciaccess = 0.13.2-1.3 libpciaccess(x86-32) = 0.13.2-1.3 libpciaccess.so.0 [ 108s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 108s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 108s] Requires(post): /sbin/ldconfig [ 108s] Requires(postun): /sbin/ldconfig [ 108s] Requires: libasan.so.6 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.4) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 108s] Processing files: libpciaccess-debugsource-0.13.2-1.3.i686 [ 108s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 108s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 108s] [ 108s] Provides: libpciaccess-debugsource = 0.13.2-1.3 libpciaccess-debugsource(x86-32) = 0.13.2-1.3 [ 108s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 108s] Processing files: libpciaccess-devel-0.13.2-1.3.i686 [ 108s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 108s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 108s] [ 108s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.nbophS [ 108s] + umask 022 [ 108s] + cd /home/abuild/rpmbuild/BUILD [ 108s] + cd libpciaccess-0.13.2 [ 108s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess-devel [ 108s] + export LC_ALL=C [ 108s] + LC_ALL=C [ 108s] + export LICENSEDIR [ 108s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess-devel [ 108s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386/usr/share/licenses/libpciaccess-devel [ 108s] + exit 0 [ 109s] Provides: libpciaccess-devel = 0.13.2-1.3 libpciaccess-devel(x86-32) = 0.13.2-1.3 pkgconfig(pciaccess) = 0.13.2 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 109s] Processing files: libpciaccess-debuginfo-0.13.2-1.3.i686 [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: libpciaccess-debuginfo = 0.13.2-1.3 libpciaccess-debuginfo(x86-32) = 0.13.2-1.3 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Recommends: libpciaccess-debugsource(x86-32) = 0.13.2-1.3 [ 109s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 109s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.3.src.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-0.13.2-1.3.i686.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debugsource-0.13.2-1.3.i686.rpm [ 109s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-devel-0.13.2-1.3.i686.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debuginfo-0.13.2-1.3.i686.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.p7hmqQ [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd libpciaccess-0.13.2 [ 110s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.3.i386 [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 110s] libpciaccess(x86_64:32bit): writing specfile... [ 110s] libpciaccess(x86_64:32bit): running build... [ 111s] libpciaccess-debuginfo(x86_64:32bit): writing specfile... [ 111s] libpciaccess-debuginfo(x86_64:32bit): running build... [ 112s] ... comparing built packages with the former built [ 112s] /usr/lib/build/pkg-diff.sh [ 112s] compare /.build.oldpackages/libpciaccess-0.13.2-1.2.src.rpm /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.3.src.rpm [ 113s] This is not a prerelease project. Compare the project name. [ 113s] comparing rpmtags [ 113s] comparing RELEASE [ 113s] comparing PROVIDES [ 113s] comparing scripts [ 113s] comparing filelist [ 114s] comparing file checksum [ 114s] RPM meta information is identical [ 114s] compare /.build.oldpackages/libpciaccess-0.13.2-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpciaccess-0.13.2-1.3.i686.rpm [ 114s] Comparing libpciaccess-0.13.2-1.2.i686.rpm to libpciaccess-0.13.2-1.3.i686.rpm [ 114s] This is not a prerelease project. Compare the project name. [ 114s] comparing rpmtags [ 114s] --- /tmp/tmp.EdTP747424/tmp.UNqb747645 2023-10-06 13:07:32.743785145 +0900 [ 114s] +++ /tmp/tmp.EdTP747424/tmp.vdQt747681 2023-10-06 13:07:32.803785143 +0900 [ 114s] @@ -6,7 +6,7 @@ [ 114s] MIT MIT [ 114s] Base/Device Management http://cgit.freedesktop.org/xorg/lib/libpciaccess/ (none) (none) (none) [ 114s] (none) 4.14.1 i686-tizen-linux [ 114s] - cpio xz 5T [ 114s] + cpio zstd 9 [ 114s] [ 114s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 114s] obs://127.0.0.1/Tizen-Base-ASAN/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base-ASAN [ 114s] RPM meta information is different [ 114s] compare /.build.oldpackages/libpciaccess-debuginfo-0.13.2-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debuginfo-0.13.2-1.3.i686.rpm [ 114s] skipping -debuginfo package [ 114s] compare /.build.oldpackages/libpciaccess-debugsource-0.13.2-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debugsource-0.13.2-1.3.i686.rpm [ 115s] Comparing libpciaccess-debugsource-0.13.2-1.2.i686.rpm to libpciaccess-debugsource-0.13.2-1.3.i686.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 115s] comparing rpmtags [ 115s] --- /tmp/tmp.uDbQ748619/tmp.upFm748788 2023-10-06 13:07:33.415785123 +0900 [ 115s] +++ /tmp/tmp.uDbQ748619/tmp.NMQm748811 2023-10-06 13:07:33.463785122 +0900 [ 115s] @@ -7,7 +7,7 @@ [ 115s] MIT MIT [ 115s] Development/Debug http://cgit.freedesktop.org/xorg/lib/libpciaccess/ (none) (none) (none) [ 115s] (none) 4.14.1 i686-tizen-linux [ 115s] - cpio xz 5T [ 115s] + cpio zstd 9 [ 115s] [ 115s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 115s] obs://127.0.0.1/Tizen-Base-ASAN/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base-ASAN [ 115s] RPM meta information is different [ 115s] compare /.build.oldpackages/libpciaccess-devel-0.13.2-1.2.i686.rpm /home/abuild/rpmbuild/RPMS/i686/libpciaccess-devel-0.13.2-1.3.i686.rpm [ 115s] Comparing libpciaccess-devel-0.13.2-1.2.i686.rpm to libpciaccess-devel-0.13.2-1.3.i686.rpm [ 115s] This is not a prerelease project. Compare the project name. [ 116s] comparing rpmtags [ 116s] --- /tmp/tmp.JuxU749580/tmp.oRZN750084 2023-10-06 13:07:34.003785105 +0900 [ 116s] +++ /tmp/tmp.JuxU749580/tmp.AoPV750120 2023-10-06 13:07:34.043785104 +0900 [ 116s] @@ -9,7 +9,7 @@ [ 116s] MIT MIT [ 116s] Development/Libraries http://cgit.freedesktop.org/xorg/lib/libpciaccess/ (none) (none) (none) [ 116s] (none) 4.14.1 i686-tizen-linux [ 116s] - cpio xz 5T [ 116s] + cpio zstd 9 [ 116s] [ 116s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 116s] obs://127.0.0.1/Tizen-Base-ASAN/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-Base-ASAN [ 116s] RPM meta information is different [ 116s] [ 116s] 763f3fd73db9 finished "build libpciaccess.spec" at Fri Oct 6 04:07:34 UTC 2023. [ 116s]