[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 714a51c77058 started "build gtk-doc.spec" at Mon Nov 27 10:28:32 UTC 2023. [ 0s] [ 0s] Building gtk-doc for project 'Tizen-Base-ASAN' repository 'standard' arch 'armv7l' srcmd5 'b4f14cadd1338b1a2d43df612b5ef79f' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/gtk-doc.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/gtk-doc.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/8/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.8/.build-srcdir/gtk-doc.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/46] preinstalling libmagic-data... [ 2s] [2/46] preinstalling libncurses... [ 2s] [3/46] preinstalling setup... [ 2s] [4/46] preinstalling filesystem... [ 2s] [5/46] preinstalling glibc... [ 3s] [6/46] preinstalling libgcc... [ 3s] [7/46] preinstalling libstdc++... [ 3s] [8/46] preinstalling libasan... [ 3s] [9/46] preinstalling bash... [ 3s] [10/46] preinstalling diffutils... [ 3s] [11/46] preinstalling findutils... [ 3s] [12/46] preinstalling grep... [ 3s] [13/46] preinstalling libattr... [ 3s] [14/46] preinstalling libblkid... [ 4s] [15/46] preinstalling libbz2... [ 4s] [16/46] preinstalling libcap... [ 4s] [17/46] preinstalling libfreebl3... [ 4s] [18/46] preinstalling liblua... [ 4s] [19/46] preinstalling liblzma... [ 4s] [20/46] preinstalling libpopt... [ 5s] [21/46] preinstalling libreadline... [ 5s] [22/46] preinstalling libsmack... [ 5s] [23/46] preinstalling libsqlite... [ 5s] [24/46] preinstalling libuuid... [ 5s] [25/46] preinstalling libzstd1... [ 5s] [26/46] preinstalling nspr... [ 6s] [27/46] preinstalling sed... [ 6s] [28/46] preinstalling zlib... [ 6s] [29/46] preinstalling qemu-accel-x86_64-armv7l... [ 9s] [30/46] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [31/46] preinstalling asan-build-env... [ 10s] [32/46] preinstalling coreutils... [ 10s] [33/46] preinstalling libacl... [ 10s] [34/46] preinstalling libelf... [ 10s] [35/46] preinstalling libmount... [ 10s] [36/46] preinstalling smack... [ 10s] [37/46] preinstalling bzip2... [ 10s] [38/46] preinstalling libmagic... [ 11s] [39/46] preinstalling libxml2... [ 11s] [40/46] preinstalling tar... [ 11s] [41/46] preinstalling util-linux... [ 11s] [42/46] preinstalling util-linux-su... [ 11s] [43/46] preinstalling nss... [ 12s] [44/46] preinstalling libsoftokn3... [ 12s] [45/46] preinstalling rpm... [ 13s] [46/46] preinstalling asan-force-options... [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-armv7l postinstall script [ 15s] running setup postinstall script [ 15s] chroot: failed to run command '': No such file or directory [ 15s] running asan-build-env postinstall script [ 15s] running asan-force-options postinstall script [ 15s] /usr/bin [ 20s] initializing rpm db... [ 20s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 20s] breaking dependency libasan -> glibc [ 20s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 20s] breaking dependency libasan -> libgcc [ 20s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 20s] breaking dependency libstdc++ -> glibc [ 20s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 20s] breaking dependency setup -> asan-runtime-env [ 20s] cycle: nss -> libsoftokn3 [ 20s] breaking dependency nss -> libsoftokn3 [ 20s] done [ 20s] querying package ids... [ 22s] [1/121] cumulate libmagic-data-5.44-1.18 [ 22s] [2/121] cumulate setup-0.9-1.6 [ 22s] [3/121] cumulate filesystem-3.1-1.2 [ 22s] [4/121] cumulate glibc-2.30-1.17 [ 22s] [5/121] cumulate libgcc-9.2.0-1.13 [ 22s] [6/121] cumulate libatomic-9.2.0-1.13 [ 22s] [7/121] cumulate libgfortran-9.2.0-1.13 [ 22s] [8/121] cumulate libgomp-9.2.0-1.13 [ 22s] [9/121] cumulate libitm-9.2.0-1.13 [ 22s] [10/121] cumulate libstdc++-9.2.0-1.13 [ 22s] [11/121] cumulate libstdc++-devel-9.2.0-1.13 [ 22s] [12/121] cumulate binutils-2.33.1-1.19 [ 22s] [13/121] cumulate libasan-9.2.0-1.13 [ 22s] [14/121] cumulate libcc1-9.2.0-1.13 [ 22s] [15/121] cumulate libubsan-9.2.0-1.13 [ 22s] [16/121] cumulate asan-runtime-env-9.2.0-2.9 [ 22s] [17/121] cumulate bash-3.2.57-1.9 [ 22s] [18/121] cumulate cpio-2.8-1.4 [ 22s] [19/121] cumulate diffutils-3.8-1.4 [ 22s] [20/121] cumulate findutils-4.3.8-1.17 [ 22s] [21/121] cumulate gdbm-1.8.3-1.22 [ 22s] [22/121] cumulate hostname-3.23-1.4 [ 22s] [23/121] cumulate libattr-2.5.1-1.20 [ 22s] [24/121] cumulate libblkid-2.37.4-1.6 [ 22s] [25/121] cumulate libbz2-1.0.8-1.17 [ 22s] [26/121] cumulate libcap-2.24-1.18 [ 22s] [27/121] cumulate libexpat-2.4.1-1.20 [ 22s] [28/121] cumulate libext2fs-1.46.0-1.16 [ 22s] [29/121] cumulate libffi-3.4.2-1.20 [ 22s] [30/121] cumulate libfreebl3-3.87-2.6 [ 22s] [31/121] cumulate libgpg-error-1.46-1.4 [ 22s] [32/121] cumulate libltdl-2.4.7-1.22 [ 22s] [33/121] cumulate liblua-5.1.5-1.16 [ 22s] [34/121] cumulate liblzma-5.4.0-1.20 [ 22s] [35/121] cumulate libopenssl11-1.1.1u-1.22 [ 22s] [36/121] cumulate libpcre-8.45-1.8 [ 22s] [37/121] cumulate libpopt-1.16-1.18 [ 22s] [38/121] cumulate libpython-2.7.18-1.22 [ 22s] [39/121] cumulate libpython3_111_0-3.11.2-1.18 [ 22s] [40/121] cumulate libsmack-1.3.1-1.16 [ 22s] [41/121] cumulate libsmartcols-2.37.4-1.6 [ 22s] [42/121] cumulate libsqlite-3.40.1-1.19 [ 22s] [43/121] cumulate libuuid-2.37.4-1.6 [ 22s] [44/121] cumulate libzstd1-1.5.2-1.19 [ 22s] [45/121] cumulate m4-1.4.19-1.4 [ 22s] [46/121] cumulate net-tools-2.0_20121208git-2.1 [ 22s] [47/121] cumulate nspr-4.35-1.16 [ 22s] [48/121] cumulate patch-2.7.6-1.18 [ 22s] [49/121] cumulate pkg-config-0.29.2-1.18 [ 22s] [50/121] cumulate sed-4.1c-1.4 [ 22s] [51/121] cumulate update-alternatives-1.21.18-1.4 [ 22s] [52/121] cumulate which-2.17-1.4 [ 22s] [53/121] cumulate zlib-1.2.13-1.20 [ 22s] [54/121] cumulate db4-4.8.30.NC-1.20 [ 22s] [55/121] cumulate build-compare-2015.04.28-1.12 [ 22s] [56/121] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.12 [ 22s] [57/121] cumulate asan-build-env-9.2.0-2.9 [ 22s] [58/121] cumulate cpp-9.2.0-1.13 [ 22s] [59/121] cumulate gcc-c++-9.2.0-1.13 [ 22s] [60/121] cumulate coreutils-6.9-14.12 [ 22s] [61/121] cumulate gawk-3.1.5-1.4 [ 22s] [62/121] cumulate grep-2.5.2-1.4 [ 22s] [63/121] cumulate libacl-2.2.53-1.19 [ 22s] [64/121] cumulate libelf-0.189-1.20 [ 22s] [65/121] cumulate libgcrypt-1.10.1-1.4 [ 22s] [66/121] cumulate libmount-2.37.4-1.6 [ 22s] [67/121] cumulate make-4.3-1.18 [ 22s] [68/121] cumulate nss-certs-3.87-2.6 [ 22s] [69/121] cumulate smack-1.3.1-1.16 [ 22s] [70/121] cumulate bzip2-1.0.8-1.17 [ 22s] [71/121] cumulate gettext-runtime-0.21.1-2.20 [ 22s] [72/121] cumulate libfdisk-2.37.4-1.6 [ 22s] [73/121] cumulate libmagic-5.44-1.18 [ 22s] [74/121] cumulate libxml2-2.10.2-1.18 [ 22s] [75/121] cumulate perl-5.34.0-1.18 [ 22s] [76/121] cumulate xz-5.4.0-1.20 [ 22s] [77/121] cumulate gcc-9.2.0-1.13 [ 22s] [78/121] cumulate build-mkbaselibs-20120927-1.2 [ 22s] [79/121] cumulate linux-glibc-devel-5.4-1.4 [ 22s] [80/121] cumulate qemu-accel-x86_64-armv7l-0.4-2.5 [ 22s] [81/121] cumulate terminfo-base-full-6.2-1.20 [ 22s] [82/121] cumulate autoconf-2.71-1.22 [ 22s] [83/121] cumulate glibc-locale-2.30-1.17 [ 22s] [84/121] cumulate file-5.44-1.18 [ 22s] [85/121] cumulate tar-1.17-1.4 [ 22s] [86/121] cumulate gzip-1.3.12-1.18 [ 22s] [87/121] cumulate pam-1.1.6-1.4 [ 22s] [88/121] cumulate tzdata-2023c-1.4 [ 22s] [89/121] cumulate libdw-0.189-1.20 [ 22s] [90/121] cumulate nss-3.87-2.6 [ 22s] [91/121] cumulate libxslt-1.1.37-1.4 [ 22s] [92/121] cumulate libarchive-3.6.2-1.22 [ 22s] [93/121] cumulate glibc-devel-2.30-1.17 [ 22s] [94/121] cumulate automake-1.16.5-1.21 [ 22s] [95/121] cumulate build-20120927-1.2 [ 22s] [96/121] cumulate libasm-0.189-1.20 [ 22s] [97/121] cumulate libncurses6-6.2-1.20 [ 22s] [98/121] cumulate libxslt-tools-1.1.37-1.4 [ 22s] [99/121] cumulate libsoftokn3-3.87-2.6 [ 22s] [100/121] cumulate rpm-4.14.1.1-2.4 [ 22s] [101/121] cumulate libncurses-6.2-1.20 [ 22s] [102/121] cumulate asan-force-options-9.2.0-2.9 [ 22s] [103/121] cumulate less-608-1.4 [ 22s] [104/121] cumulate libreadline-5.2-1.20 [ 22s] [105/121] cumulate procps-ng-3.3.17-1.4 [ 22s] [106/121] cumulate libtool-2.4.7-1.22 [ 22s] [107/121] cumulate elfutils-0.189-1.20 [ 22s] [108/121] cumulate rpm-build-4.14.1.1-2.4 [ 22s] [109/121] cumulate libxml2-tools-2.10.2-1.18 [ 22s] [110/121] cumulate python-2.7.18-1.22 [ 22s] [111/121] cumulate python3-base-3.11.2-1.18 [ 22s] [112/121] cumulate util-linux-2.37.4-1.6 [ 22s] [113/121] cumulate sgml-skel-0.7.1-1.2 [ 22s] [114/121] cumulate util-linux-su-2.37.4-1.6 [ 22s] [115/121] cumulate python-libxml2-2.10.2-1.4 [ 22s] [116/121] cumulate gettext-tools-0.21.1-2.20 [ 22s] [117/121] cumulate iso_ent-2000.11.03-1.2 [ 22s] [118/121] cumulate itstool-2.0.7-1.2 [ 22s] [119/121] cumulate xmlcharent-0.3-405.2 [ 22s] [120/121] cumulate docbook_4-4.5-1.2 [ 22s] [121/121] cumulate docbook-xsl-stylesheets-1.79.2-1.2 [ 22s] now installing cumulated packages [ 25s] Preparing... ######################################## [ 25s] Updating / installing... [ 25s] asan-runtime-env-9.2.0-2.9 ######################################## [ 25s] setup-0.9-1.6 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 25s] ########################## [ 25s] filesystem-3.1-1.2 ######################################## [ 25s] glibc-2.30-1.17 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 25s] ######################################## [ 25s] libgcc-9.2.0-1.13 ######################################## [ 25s] libstdc++-9.2.0-1.13 ######################################## [ 25s] libasan-9.2.0-1.13 ######################################## [ 25s] libmagic-data-5.44-1.18 ######################################## [ 25s] bash-3.2.57-1.9 ######################################## [ 25s] zlib-1.2.13-1.20 ######################################## [ 26s] liblzma-5.4.0-1.20 ######################################## [ 26s] coreutils-6.9-14.12 ######################################## [ 26s] libxml2-2.10.2-1.18 ######################################## [ 26s] libbz2-1.0.8-1.17 ######################################## [ 26s] libelf-0.189-1.20 ######################################## [ 26s] libdw-0.189-1.20 ######################################## [ 27s] libmagic-5.44-1.18 ######################################## [ 27s] gawk-3.1.5-1.4 ######################################## [ 27s] libblkid-2.37.4-1.6 ######################################## [ 27s] libopenssl11-1.1.1u-1.22 ######################################## [ 28s] libsqlite-3.40.1-1.19 ######################################## [ 28s] nspr-4.35-1.16 ######################################## [ 28s] sed-4.1c-1.4 ######################################## [ 28s] pam-1.1.6-1.4 ######################################## [ 28s] gdbm-1.8.3-1.22 ######################################## [ 30s] perl-5.34.0-1.18 ######################################## [ 30s] libcap-2.24-1.18 ######################################## [ 30s] libfreebl3-3.87-2.6 ######################################## [ 30s] libgpg-error-1.46-1.4 ######################################## [ 30s] liblua-5.1.5-1.16 ######################################## [ 30s] libpopt-1.16-1.18 ######################################## [ 30s] libpython-2.7.18-1.22 ######################################## [ 31s] libuuid-2.37.4-1.6 ######################################## [ 31s] libzstd1-1.5.2-1.19 ######################################## [ 31s] binutils-2.33.1-1.19 ######################################## [ 31s] build-mkbaselibs-20120927-1.2 ######################################## [ 31s] linux-glibc-devel-5.4-1.4 ######################################## [ 31s] terminfo-base-full-6.2-1.20 ######################################## [ 32s] libncurses6-6.2-1.20 ######################################## [ 32s] libreadline-5.2-1.20 ######################################## [ 32s] libxml2-tools-2.10.2-1.18 ######################################## [ 32s] sgml-skel-0.7.1-1.2 ######################################## [ 32s] iso_ent-2000.11.03-1.2 ######################################## [ 32s] glibc-devel-2.30-1.17 ######################################## [ 32s] libfdisk-2.37.4-1.6 ######################################## [ 33s] libgcrypt-1.10.1-1.4 ######################################## [ 33s] libxslt-1.1.37-1.4 ######################################## [ 33s] nss-certs-3.87-2.6 ######################################## [ 33s] libsoftokn3-3.87-2.6 ######################################## [ 33s] nss-3.87-2.6 ######################################## [ 34s] libmount-2.37.4-1.6 ######################################## [ 34s] libasm-0.189-1.20 ######################################## [ 34s] bzip2-1.0.8-1.17 ######################################## [ 34s] gzip-1.3.12-1.18 ######################################## [ 34s] xz-5.4.0-1.20 ######################################## [ 34s] make-4.3-1.18 ######################################## [ 34s] gettext-runtime-0.21.1-2.20 ######################################## [ 34s] findutils-4.3.8-1.17 ######################################## [ 34s] libattr-2.5.1-1.20 ######################################## [ 34s] libacl-2.2.53-1.19 ######################################## [ 35s] tar-1.17-1.4 ######################################## [ 35s] libarchive-3.6.2-1.22 ######################################## [ 35s] rpm-4.14.1.1-2.4 ######################################## [ 36s] libexpat-2.4.1-1.20 ######################################## [ 36s] libffi-3.4.2-1.20 ######################################## [ 36s] libltdl-2.4.7-1.22 ######################################## [ 36s] libpcre-8.45-1.8 ######################################## [ 36s] grep-2.5.2-1.4 ######################################## [ 36s] xmlcharent-0.3-405.2 ######################################## [ 37s] docbook_4-4.5-1.2 ######################################## [ 40s] libpython3_111_0-3.11.2-1.18 ######################################## [ 40s] libsmack-1.3.1-1.16 ######################################## [ 41s] libsmartcols-2.37.4-1.6 ######################################## [ 41s] util-linux-2.37.4-1.6 ######################################## [ 41s] m4-1.4.19-1.4 ######################################## [ 42s] autoconf-2.71-1.22 ######################################## [ 42s] automake-1.16.5-1.21 ######################################## [ 42s] patch-2.7.6-1.18 ######################################## [ 42s] db4-4.8.30.NC-1.20 ######################################## [ 43s] python-2.7.18-1.22 ######################################## [ 43s] python-libxml2-2.10.2-1.4 ######################################## [ 43s] libcc1-9.2.0-1.13 ######################################## [ 43s] libubsan-9.2.0-1.13 ######################################## [ 43s] libatomic-9.2.0-1.13 ######################################## [ 44s] libgfortran-9.2.0-1.13 ######################################## [ 44s] libgomp-9.2.0-1.13 ######################################## [ 44s] libitm-9.2.0-1.13 ######################################## [ 44s] itstool-2.0.7-1.2 ######################################## [ 45s] docbook-xsl-stylesheets-1.79.2-1.2 ######################################## [ 46s] libtool-2.4.7-1.22 ######################################## [ 46s] build-20120927-1.2 ######################################## [ 46s] libncurses-6.2-1.20 ######################################## [ 46s] build-compare-2015.04.28-1.12 ######################################## [ 46s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 47s] asan-build-env-9.2.0-2.9 ######################################## [ 47s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 47s] libstdc++-devel-9.2.0-1.13 ######################################## [ 47s] gcc-9.2.0-1.13 ######################################## [ 49s] qemu-accel-x86_64-armv7l-0.4-2.5 ######################################## [ 50s] asan-force-options-9.2.0-2.9 ######################################## [ 50s] /usr/bin [ 53s] rpm-build-4.14.1.1-2.4 ######################################## [ 53s] gettext-tools-0.21.1-2.20 ######################################## [ 54s] util-linux-su-2.37.4-1.6 ######################################## [ 54s] smack-1.3.1-1.16 ######################################## [ 54s] python3-base-3.11.2-1.18 ######################################## [ 54s] elfutils-0.189-1.20 ######################################## [ 54s] libxslt-tools-1.1.37-1.4 ######################################## [ 54s] less-608-1.4 ######################################## [ 54s] procps-ng-3.3.17-1.4 ######################################## [ 54s] file-5.44-1.18 ######################################## [ 54s] glibc-locale-2.30-1.17 ######################################## [ 55s] tzdata-2023c-1.4 ######################################## [ 55s] cpp-9.2.0-1.13 ######################################## [ 55s] gcc-c++-9.2.0-1.13 ######################################## [ 55s] cpio-2.8-1.4 ######################################## [ 55s] diffutils-3.8-1.4 ######################################## [ 55s] hostname-3.23-1.4 ######################################## [ 55s] libext2fs-1.46.0-1.16 ######################################## [ 55s] net-tools-2.0_20121208git-2.1 ######################################## [ 55s] pkg-config-0.29.2-1.18 ######################################## [ 55s] update-alternatives-1.21.18-1.4 ######################################## [ 55s] which-2.17-1.4 ######################################## [ 56s] now finalizing build dir... [ 56s] ----------------------------------------------------------------- [ 56s] I have the following modifications for gtk-doc.spec: [ 56s] 4c4 [ 56s] < Release: 0 [ 56s] --- [ 56s] > Release: 1.2 [ 56s] 17c17 [ 56s] < BuildRequires: gettext [ 56s] --- [ 56s] > BuildRequires: gettext-tools [ 57s] build target is armv7l-tizen-linux [ 57s] ----------------------------------------------------------------- [ 57s] ----- building gtk-doc.spec (user abuild) [ 57s] ----------------------------------------------------------------- [ 57s] ----------------------------------------------------------------- [ 57s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc' /home/abuild/rpmbuild/SOURCES/gtk-doc.spec [ 57s] Building target platforms: armv7l-tizen-linux [ 57s] Building for target armv7l-tizen-linux [ 57s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.bFjZyz [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + rm -rf gtk-doc-1.33.2 [ 57s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gtk-doc-1.33.2.tar.xz [ 57s] + /bin/tar -xof - [ 57s] + STATUS=0 [ 57s] + '[' 0 -ne 0 ']' [ 57s] + cd gtk-doc-1.33.2 [ 57s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 57s] + exit 0 [ 57s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.NlYmNz [ 57s] + umask 022 [ 57s] + cd /home/abuild/rpmbuild/BUILD [ 57s] + cd gtk-doc-1.33.2 [ 57s] + ref=/usr/lib/rpm [ 57s] + mints=0 [ 57s] + case $(uname -m) in [ 57s] ++ uname -m [ 57s] + for s in guess sub [ 57s] ++ find -maxdepth 8 -name config.guess [ 57s] + for s in guess sub [ 57s] ++ find -maxdepth 8 -name config.sub [ 57s] + LANG=C [ 57s] + export LANG [ 57s] + unset DISPLAY [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + LDFLAGS= [ 57s] + export LDFLAGS [ 57s] + AR=gcc-ar [ 57s] + export AR [ 57s] + NM=/bin/nm [ 57s] + export NM [ 57s] + RANLIB=gcc-ranlib [ 57s] + export RANLIB [ 57s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CFLAGS [ 57s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 57s] + export CXXFLAGS [ 57s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 57s] + export FFLAGS [ 57s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 59s] autoreconf: export WARNINGS= [ 59s] autoreconf: Entering directory '.' [ 59s] autoreconf: configure.ac: not using Gettext [ 60s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 83s] autoreconf: configure.ac: tracing [ 87s] autoreconf: configure.ac: creating directory build-aux [ 87s] autoreconf: running: libtoolize --copy --force [ 87s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 87s] libtoolize: copying file 'build-aux/ltmain.sh' [ 87s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 87s] libtoolize: copying file 'm4/libtool.m4' [ 88s] libtoolize: copying file 'm4/ltoptions.m4' [ 88s] libtoolize: copying file 'm4/ltsugar.m4' [ 88s] libtoolize: copying file 'm4/ltversion.m4' [ 88s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 89s] autoreconf: configure.ac: not using Intltool [ 89s] autoreconf: configure.ac: not using Gtkdoc [ 89s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 114s] autoreconf: running: /usr/bin/autoconf --force [ 121s] autoreconf: configure.ac: not using Autoheader [ 121s] autoreconf: running: automake --add-missing --copy --force-missing [ 127s] configure.ac:23: installing 'build-aux/compile' [ 127s] configure.ac:27: installing 'build-aux/config.guess' [ 127s] configure.ac:27: installing 'build-aux/config.sub' [ 127s] configure.ac:14: installing 'build-aux/install-sh' [ 128s] configure.ac:14: installing 'build-aux/missing' [ 128s] Makefile.am: installing './INSTALL' [ 131s] parallel-tests: installing 'build-aux/test-driver' [ 133s] tests/annotations/src/Makefile.am: installing 'build-aux/depcomp' [ 148s] autoreconf: Leaving directory '.' [ 149s] checking for a BSD-compatible install... /bin/install -c [ 149s] checking whether build environment is sane... yes [ 149s] checking for a race-free mkdir -p... /bin/mkdir -p [ 149s] checking for gawk... gawk [ 149s] checking whether make sets $(MAKE)... yes [ 149s] checking whether make supports nested variables... yes [ 149s] checking whether UID '399' is supported by ustar format... yes [ 149s] checking whether GID '399' is supported by ustar format... yes [ 149s] checking how to create a ustar tar archive... gnutar [ 149s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 149s] checking whether make supports nested variables... (cached) yes [ 149s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 149s] checking whether the C compiler works... yes [ 149s] checking for C compiler default output file name... a.out [ 150s] checking for suffix of executables... [ 150s] checking whether we are cross compiling... no [ 150s] checking for suffix of object files... o [ 150s] checking whether the compiler supports GNU C... yes [ 150s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 150s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 150s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 150s] checking whether make supports the include directive... yes (GNU style) [ 150s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 150s] checking build system type... armv7l-tizen-linux-gnueabi [ 150s] checking host system type... armv7l-tizen-linux-gnueabi [ 150s] checking how to print strings... printf [ 150s] checking for a sed that does not truncate output... /bin/sed [ 150s] checking for grep that handles long lines and -e... /bin/grep [ 150s] checking for egrep... /bin/grep -E [ 150s] checking for fgrep... /bin/grep -F [ 151s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 151s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 151s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 151s] checking the name lister (/bin/nm) interface... BSD nm [ 151s] checking whether ln -s works... yes [ 151s] checking the maximum length of command line arguments... 1572864 [ 151s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 151s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 151s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 151s] checking for armv7l-tizen-linux-gnueabi-file... no [ 151s] checking for file... file [ 151s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 151s] checking for objdump... objdump [ 151s] checking how to recognize dependent libraries... pass_all [ 151s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 151s] checking for dlltool... no [ 151s] checking how to associate runtime and link libraries... printf %s\n [ 151s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 151s] checking for archiver @FILE support... @ [ 151s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 151s] checking for strip... strip [ 151s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 151s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 151s] checking for sysroot... no [ 151s] checking for a working dd... /bin/dd [ 151s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 151s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 151s] checking for mt... no [ 151s] checking if : is a manifest tool... no [ 151s] checking for stdio.h... yes [ 151s] checking for stdlib.h... yes [ 151s] checking for string.h... yes [ 152s] checking for inttypes.h... yes [ 152s] checking for stdint.h... yes [ 152s] checking for strings.h... yes [ 152s] checking for sys/stat.h... yes [ 152s] checking for sys/types.h... yes [ 152s] checking for unistd.h... yes [ 152s] checking for dlfcn.h... yes [ 152s] checking for objdir... .libs [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 152s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 152s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 152s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 153s] checking whether -lc should be explicitly linked in... no [ 153s] checking dynamic linker characteristics... GNU/Linux ld.so [ 153s] checking how to hardcode library paths into programs... immediate [ 153s] checking whether stripping libraries is possible... yes [ 153s] checking if libtool supports shared libraries... yes [ 153s] checking whether to build shared libraries... yes [ 153s] checking whether to build static libraries... yes [ 153s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 153s] checking pkg-config is at least version 0.19... yes [ 154s] checking for a Python interpreter with version >= 3.2... python3 [ 154s] checking for python3... /bin/python3 [ 155s] checking for python3 version... 3.11 [ 155s] checking for python3 platform... linux [ 155s] checking for GNU default python3 prefix... ${prefix} [ 155s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 156s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 157s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages [ 157s] checking for xsltproc... /bin/xsltproc [ 157s] checking for dblatex... no [ 157s] checking for fop... no [ 157s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 157s] checking for XML catalog... /etc/xml/catalog [ 157s] checking for xmlcatalog... /bin/xmlcatalog [ 157s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 157s] checking for DocBook XSL Stylesheets in XML catalog... found [ 157s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 158s] checking whether to enable runtime debugging code... no [ 158s] checking whether date can output nanoseconds... yes [ 158s] checking whether date can format dates... yes [ 158s] checking for yelp-tools... no [ 158s] checking python3 module: "pygments"... no [ 159s] checking that generated files are newer than configure... done [ 159s] configure: creating ./config.status [ 161s] config.status: creating Makefile [ 161s] config.status: creating gtk-doc.pc [ 161s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 161s] config.status: creating buildsystems/autotools/Makefile [ 161s] config.status: creating buildsystems/cmake/Makefile [ 161s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 161s] config.status: creating gtkdoc/config_data.py [ 161s] config.status: creating help/Makefile [ 161s] config.status: creating help/manual/Makefile [ 161s] config.status: creating tests/Makefile [ 161s] config.status: creating tests/annotations/Makefile [ 161s] config.status: creating tests/annotations/src/Makefile [ 161s] config.status: creating tests/annotations/docs/Makefile [ 162s] config.status: creating tests/bugs/Makefile [ 162s] config.status: creating tests/bugs/src/Makefile [ 162s] config.status: creating tests/bugs/docs/Makefile [ 162s] config.status: creating tests/empty/Makefile [ 162s] config.status: creating tests/empty/src/Makefile [ 162s] config.status: creating tests/empty/docs/Makefile [ 162s] config.status: creating tests/fail/Makefile [ 162s] config.status: creating tests/fail/src/Makefile [ 162s] config.status: creating tests/fail/docs/Makefile [ 162s] config.status: creating tests/gobject/Makefile [ 163s] config.status: creating tests/gobject/src/Makefile [ 163s] config.status: creating tests/gobject/docs/Makefile [ 163s] config.status: creating tests/program/Makefile [ 163s] config.status: creating tests/program/src/Makefile [ 163s] config.status: creating tests/program/docs/Makefile [ 163s] config.status: creating tests/repro/Makefile [ 163s] config.status: creating tests/repro/src/Makefile [ 163s] config.status: creating tests/repro/docs/Makefile [ 163s] config.status: creating gtkdoc-check [ 163s] config.status: creating gtkdoc-depscan [ 164s] config.status: creating gtkdoc-fixxref [ 164s] config.status: creating gtkdoc-mkdb [ 164s] config.status: creating gtkdoc-mkhtml [ 164s] config.status: creating gtkdoc-mkhtml2 [ 164s] config.status: creating gtkdoc-mkman [ 164s] config.status: creating gtkdoc-mkpdf [ 164s] config.status: creating gtkdoc-rebase [ 164s] config.status: creating gtkdoc-scan [ 165s] config.status: creating gtkdoc-scangobj [ 165s] config.status: creating buildsystems/autotools/gtkdocize [ 165s] config.status: creating tests/tools.sh [ 165s] config.status: executing depfiles commands [ 166s] config.status: executing libtool commands [ 166s] configure: [ 166s] gtk-doc was configured with the following options: [ 166s] ================================================== [ 166s] configure: PDF support disabled, no dblatex or fop available [ 166s] configure: Skipping regression tests [ 166s] configure: Debug tracing disabled [ 166s] configure: Documentation disabled [ 167s] + AR=gcc-ar [ 167s] + export AR [ 167s] + NM=/bin/nm [ 167s] + export NM [ 167s] + RANLIB=gcc-ranlib [ 167s] + export RANLIB [ 167s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 167s] + export CFLAGS [ 167s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 167s] + export CXXFLAGS [ 167s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 167s] + export FFLAGS [ 167s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-scrollkeeper [ 167s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 168s] checking for a BSD-compatible install... /bin/install -c [ 168s] checking whether build environment is sane... yes [ 168s] checking for a race-free mkdir -p... /bin/mkdir -p [ 168s] checking for gawk... gawk [ 168s] checking whether make sets $(MAKE)... yes [ 168s] checking whether make supports nested variables... yes [ 168s] checking whether UID '399' is supported by ustar format... yes [ 168s] checking whether GID '399' is supported by ustar format... yes [ 168s] checking how to create a ustar tar archive... gnutar [ 168s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 168s] checking whether make supports nested variables... (cached) yes [ 168s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 168s] checking whether the C compiler works... yes [ 168s] checking for C compiler default output file name... a.out [ 168s] checking for suffix of executables... [ 168s] checking whether we are cross compiling... no [ 169s] checking for suffix of object files... o [ 169s] checking whether the compiler supports GNU C... yes [ 169s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 169s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 169s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 169s] checking whether make supports the include directive... yes (GNU style) [ 169s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 169s] checking build system type... armv7l-tizen-linux-gnueabi [ 169s] checking host system type... armv7l-tizen-linux-gnueabi [ 169s] checking how to print strings... printf [ 169s] checking for a sed that does not truncate output... /bin/sed [ 169s] checking for grep that handles long lines and -e... /bin/grep [ 169s] checking for egrep... /bin/grep -E [ 169s] checking for fgrep... /bin/grep -F [ 169s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 169s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 169s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 169s] checking the name lister (/bin/nm) interface... BSD nm [ 169s] checking whether ln -s works... yes [ 170s] checking the maximum length of command line arguments... 1572864 [ 170s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 170s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 170s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 170s] checking for armv7l-tizen-linux-gnueabi-file... no [ 170s] checking for file... file [ 170s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 170s] checking for objdump... objdump [ 170s] checking how to recognize dependent libraries... pass_all [ 170s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 170s] checking for dlltool... no [ 170s] checking how to associate runtime and link libraries... printf %s\n [ 170s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 170s] checking for archiver @FILE support... @ [ 170s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 170s] checking for strip... strip [ 170s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 170s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 170s] checking for sysroot... no [ 170s] checking for a working dd... /bin/dd [ 170s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 170s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 170s] checking for mt... no [ 170s] checking if : is a manifest tool... no [ 170s] checking for stdio.h... yes [ 170s] checking for stdlib.h... yes [ 171s] checking for string.h... yes [ 171s] checking for inttypes.h... yes [ 171s] checking for stdint.h... yes [ 171s] checking for strings.h... yes [ 171s] checking for sys/stat.h... yes [ 171s] checking for sys/types.h... yes [ 171s] checking for unistd.h... yes [ 171s] checking for dlfcn.h... yes [ 171s] checking for objdir... .libs [ 171s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 171s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 171s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 171s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 172s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 172s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 172s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 172s] checking whether -lc should be explicitly linked in... no [ 172s] checking dynamic linker characteristics... GNU/Linux ld.so [ 172s] checking how to hardcode library paths into programs... immediate [ 172s] checking whether stripping libraries is possible... yes [ 172s] checking if libtool supports shared libraries... yes [ 172s] checking whether to build shared libraries... yes [ 172s] checking whether to build static libraries... yes [ 172s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 172s] checking pkg-config is at least version 0.19... yes [ 173s] checking for a Python interpreter with version >= 3.2... python3 [ 173s] checking for python3... /bin/python3 [ 174s] checking for python3 version... 3.11 [ 175s] checking for python3 platform... linux [ 175s] checking for GNU default python3 prefix... ${prefix} [ 175s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 176s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 177s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages [ 177s] checking for xsltproc... /bin/xsltproc [ 177s] checking for dblatex... no [ 177s] checking for fop... no [ 177s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 177s] checking for XML catalog... /etc/xml/catalog [ 177s] checking for xmlcatalog... /bin/xmlcatalog [ 177s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 177s] checking for DocBook XSL Stylesheets in XML catalog... found [ 177s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 177s] checking whether to enable runtime debugging code... no [ 177s] checking whether date can output nanoseconds... yes [ 177s] checking whether date can format dates... yes [ 177s] checking for yelp-tools... no [ 178s] checking python3 module: "pygments"... no [ 178s] checking that generated files are newer than configure... done [ 178s] configure: creating ./config.status [ 180s] config.status: creating Makefile [ 180s] config.status: creating gtk-doc.pc [ 180s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 180s] config.status: creating buildsystems/autotools/Makefile [ 180s] config.status: creating buildsystems/cmake/Makefile [ 181s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 181s] config.status: creating gtkdoc/config_data.py [ 181s] config.status: creating help/Makefile [ 181s] config.status: creating help/manual/Makefile [ 181s] config.status: creating tests/Makefile [ 181s] config.status: creating tests/annotations/Makefile [ 181s] config.status: creating tests/annotations/src/Makefile [ 181s] config.status: creating tests/annotations/docs/Makefile [ 181s] config.status: creating tests/bugs/Makefile [ 181s] config.status: creating tests/bugs/src/Makefile [ 182s] config.status: creating tests/bugs/docs/Makefile [ 182s] config.status: creating tests/empty/Makefile [ 182s] config.status: creating tests/empty/src/Makefile [ 182s] config.status: creating tests/empty/docs/Makefile [ 182s] config.status: creating tests/fail/Makefile [ 182s] config.status: creating tests/fail/src/Makefile [ 182s] config.status: creating tests/fail/docs/Makefile [ 182s] config.status: creating tests/gobject/Makefile [ 182s] config.status: creating tests/gobject/src/Makefile [ 182s] config.status: creating tests/gobject/docs/Makefile [ 183s] config.status: creating tests/program/Makefile [ 183s] config.status: creating tests/program/src/Makefile [ 183s] config.status: creating tests/program/docs/Makefile [ 183s] config.status: creating tests/repro/Makefile [ 183s] config.status: creating tests/repro/src/Makefile [ 183s] config.status: creating tests/repro/docs/Makefile [ 183s] config.status: creating gtkdoc-check [ 183s] config.status: creating gtkdoc-depscan [ 183s] config.status: creating gtkdoc-fixxref [ 183s] config.status: creating gtkdoc-mkdb [ 184s] config.status: creating gtkdoc-mkhtml [ 184s] config.status: creating gtkdoc-mkhtml2 [ 184s] config.status: creating gtkdoc-mkman [ 184s] config.status: creating gtkdoc-mkpdf [ 184s] config.status: creating gtkdoc-rebase [ 184s] config.status: creating gtkdoc-scan [ 184s] config.status: creating gtkdoc-scangobj [ 185s] config.status: creating buildsystems/autotools/gtkdocize [ 185s] config.status: creating tests/tools.sh [ 185s] config.status: executing depfiles commands [ 186s] config.status: executing libtool commands [ 186s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 186s] configure: [ 186s] gtk-doc was configured with the following options: [ 186s] ================================================== [ 186s] configure: PDF support disabled, no dblatex or fop available [ 186s] configure: Skipping regression tests [ 186s] configure: Debug tracing disabled [ 186s] configure: Documentation disabled [ 186s] + /bin/make -j12 [ 186s] git.mk: Generating .gitignore [ 186s] Making all in buildsystems/autotools [ 186s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 186s] git.mk: Generating .gitignore [ 186s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 186s] Making all in buildsystems/cmake [ 186s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 186s] git.mk: Generating .gitignore [ 187s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 187s] Making all in help [ 187s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 187s] git.mk: Generating .gitignore [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 187s] git.mk: Generating .gitignore [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 187s] make[2]: Nothing to be done for 'all-am'. [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 187s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 187s] Making all in tests [ 187s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 187s] git.mk: Generating .gitignore [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 187s] git.mk: Generating .gitignore [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 187s] make[2]: Nothing to be done for 'all-am'. [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 187s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 187s] git.mk: Generating .gitignore [ 187s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 187s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 187s] git.mk: Generating .gitignore [ 189s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 189s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 189s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 189s] git.mk: Generating .gitignore [ 189s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 189s] git.mk: Generating .gitignore [ 190s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 190s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 190s] git.mk: Generating .gitignore [ 192s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 192s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 192s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 192s] git.mk: Generating .gitignore [ 192s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 192s] git.mk: Generating .gitignore [ 192s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 192s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 192s] make[3]: warning: -j1 forced in makefile: resetting jobserver mode. [ 192s] git.mk: Generating .gitignore [ 195s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 195s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 195s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 195s] git.mk: Generating .gitignore [ 195s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 195s] git.mk: Generating .gitignore [ 195s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 195s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 195s] git.mk: Generating .gitignore [ 198s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 198s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 198s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 198s] git.mk: Generating .gitignore [ 198s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 198s] git.mk: Generating .gitignore [ 198s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 198s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 198s] git.mk: Generating .gitignore [ 200s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 200s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 200s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 200s] git.mk: Generating .gitignore [ 200s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 200s] git.mk: Generating .gitignore [ 200s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 200s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 200s] git.mk: Generating .gitignore [ 203s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 203s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 203s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 203s] git.mk: Generating .gitignore [ 203s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 203s] git.mk: Generating .gitignore [ 203s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 203s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 203s] git.mk: Generating .gitignore [ 206s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] make[1]: Nothing to be done for 'all-am'. [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] + exit 0 [ 206s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.saLN2A [ 206s] + umask 022 [ 206s] + cd /home/abuild/rpmbuild/BUILD [ 206s] + cd gtk-doc-1.33.2 [ 206s] + LANG=C [ 206s] + export LANG [ 206s] + unset DISPLAY [ 206s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm [ 206s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm [ 206s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm install [ 206s] Making install in buildsystems/autotools [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 206s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/bin' [ 206s] /bin/install -c gtkdocize '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/bin' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/aclocal' [ 206s] /bin/install -c -m 644 gtk-doc.m4 '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/aclocal' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/data' [ 206s] /bin/install -c -m 644 gtk-doc.make gtk-doc.flat.make gtk-doc.no-xslt.make gtk-doc.no-xslt-flat.make '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/data' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 206s] Making install in buildsystems/cmake [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 206s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 206s] make[2]: Nothing to be done for 'install-exec-am'. [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/cmake/GtkDoc' [ 206s] /bin/install -c -m 644 GtkDocConfig.cmake GtkDocConfigVersion.cmake GtkDocScanGObjWrapper.cmake '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/cmake/GtkDoc' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 206s] Making install in help [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] make[3]: Nothing to be done for 'install-exec-am'. [ 206s] make[3]: Nothing to be done for 'install-data-am'. [ 206s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 206s] Making install in tests [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[3]: Nothing to be done for 'install-exec-am'. [ 206s] make[3]: Nothing to be done for 'install-data-am'. [ 206s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 206s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/bin' [ 206s] /bin/install -c gtkdoc-check gtkdoc-depscan gtkdoc-fixxref gtkdoc-mkdb gtkdoc-mkhtml gtkdoc-mkhtml2 gtkdoc-mkman gtkdoc-mkpdf gtkdoc-rebase gtkdoc-scan gtkdoc-scangobj '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/bin' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/data' [ 206s] /bin/install -c -m 644 gtk-doc.xsl version-greater-or-equal.xsl devhelp2.xsd devhelp2.xsl style/home.png style/left.png style/left-insensitive.png style/right.png style/right-insensitive.png style/up.png style/up-insensitive.png style/style.css '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/data' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/pkgconfig' [ 206s] /bin/install -c -m 644 gtk-doc.pc '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/pkgconfig' [ 206s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/python/gtkdoc' [ 206s] /bin/install -c -m 644 gtkdoc/__init__.py gtkdoc/check.py gtkdoc/common.py gtkdoc/config.py gtkdoc/config_data.py gtkdoc/fixxref.py gtkdoc/highlight.py gtkdoc/md_to_db.py gtkdoc/mkdb.py gtkdoc/mkhtml.py gtkdoc/mkhtml2.py gtkdoc/mkman.py gtkdoc/mkpdf.py gtkdoc/rebase.py gtkdoc/scan.py gtkdoc/scangobj.py '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/gtk-doc/python/gtkdoc' [ 206s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 206s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/info/dir [ 206s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm -regex '.*\.la$' [ 206s] + xargs rm -f -- [ 206s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm -regex '.*\.a$' [ 206s] + xargs rm -f -- [ 206s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/help [ 206s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.33.2-1.2 --unique-debug-src-base gtk-doc-1.33.2-1.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2 [ 207s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debuginfo.manifest [ 208s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debugsource.manifest [ 208s] + /usr/lib/rpm/check-buildroot [ 208s] + /usr/lib/rpm//brp-compress [ 208s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 208s] + /usr/lib/rpm/brp-python-hardlink [ 208s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm [ 208s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/isu.list [ 208s] ~/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 208s] ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 208s] Processing files: gtk-doc-1.33.2-1.2.armv7l [ 208s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.N9MUOA [ 208s] + umask 022 [ 208s] + cd /home/abuild/rpmbuild/BUILD [ 208s] + cd gtk-doc-1.33.2 [ 208s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/licenses/gtk-doc [ 208s] + export LC_ALL=C [ 208s] + LC_ALL=C [ 208s] + export LICENSEDIR [ 208s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/licenses/gtk-doc [ 208s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm/usr/share/licenses/gtk-doc [ 208s] + exit 0 [ 210s] Provides: gtk-doc = 1.33.2-1.2 gtk-doc(armv7l-32) = 1.33.2-1.2 pkgconfig(gtk-doc) = 1.33.1 [ 210s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 210s] Requires: /bin/python3 /bin/sh /usr/bin/pkg-config [ 210s] Processing files: gtk-doc-debugsource-1.33.2-1.2.armv7l [ 210s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/debugsourcefiles.list [ 210s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 210s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 210s] [ 210s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm [ 210s] Wrote: /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 210s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gtk-doc-1.33.2-1.2.armv7l.rpm [ 211s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/gtk-doc-debugsource-1.33.2-1.2.armv7l.rpm [ 211s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.61aX6B [ 211s] + umask 022 [ 211s] + cd /home/abuild/rpmbuild/BUILD [ 211s] + cd gtk-doc-1.33.2 [ 211s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.arm [ 211s] + exit 0 [ 211s] ... checking for files with abuild user/group [ 211s] ... creating baselibs [ 212s] ... comparing built packages with the former built [ 212s] /usr/lib/build/pkg-diff.sh [ 212s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 212s] This is not a prerelease project. Compare the project name. [ 212s] comparing rpmtags [ 212s] comparing RELEASE [ 213s] comparing PROVIDES [ 213s] comparing scripts [ 213s] comparing filelist [ 213s] comparing file checksum [ 213s] RPM meta information is identical [ 213s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/gtk-doc-1.33.2-1.2.armv7l.rpm [ 213s] Comparing gtk-doc-1.33.2-1.1.armv7l.rpm to gtk-doc-1.33.2-1.2.armv7l.rpm [ 213s] This is not a prerelease project. Compare the project name. [ 213s] comparing rpmtags [ 213s] --- /tmp/tmp.neLa455608/tmp.yeCR455752 2023-11-27 19:32:05.847844530 +0900 [ 213s] +++ /tmp/tmp.neLa455608/tmp.dwIN455775 2023-11-27 19:32:05.859844530 +0900 [ 213s] @@ -8,7 +8,7 @@ [ 213s] GPL-2.0+ GPL-2.0+ [ 213s] Productivity/Publishing/SGML http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 213s] (none) 4.14.1 armv7l-tizen-linux [ 213s] - cpio xz 5T [ 213s] + cpio zstd 9 [ 213s] [ 213s] (none) (none) (none) [ 213s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 213s] RPM meta information is different [ 213s] compare /.build.oldpackages/gtk-doc-debugsource-1.33.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/gtk-doc-debugsource-1.33.2-1.2.armv7l.rpm [ 214s] Comparing gtk-doc-debugsource-1.33.2-1.1.armv7l.rpm to gtk-doc-debugsource-1.33.2-1.2.armv7l.rpm [ 214s] This is not a prerelease project. Compare the project name. [ 214s] comparing rpmtags [ 214s] --- /tmp/tmp.dCMk455892/tmp.zgfF456049 2023-11-27 19:32:06.375844528 +0900 [ 214s] +++ /tmp/tmp.dCMk455892/tmp.Oflc456153 2023-11-27 19:32:06.387844527 +0900 [ 214s] @@ -7,7 +7,7 @@ [ 214s] GPL-2.0+ GPL-2.0+ [ 214s] Development/Debug http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 214s] (none) 4.14.1 armv7l-tizen-linux [ 214s] - cpio xz 5T [ 214s] + cpio zstd 9 [ 214s] [ 214s] (none) (none) (none) [ 214s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 214s] RPM meta information is different [ 214s] [ 214s] 714a51c77058 finished "build gtk-doc.spec" at Mon Nov 27 10:32:06 UTC 2023. [ 214s] Retried build at Mon Nov 27 12:32:42 2023 returned same result, skipped Retried build at Tue Feb 27 12:20:16 2024 returned same result, skipped Retried build at Tue Feb 27 14:29:30 2024 returned same result, skipped Retried build at Tue Mar 5 09:20:19 2024 returned same result, skipped Retried build at Fri Mar 8 04:19:49 2024 returned same result, skipped Retried build at Fri Mar 22 15:06:29 2024 returned same result, skipped Retried build at Thu Apr 4 05:25:06 2024 returned same result, skipped Retried build at Thu Apr 4 07:55:05 2024 returned same result, skipped Retried build at Fri Apr 19 23:57:23 2024 returned same result, skipped Retried build at Thu May 30 09:26:23 2024 returned same result, skipped Retried build at Wed Jun 19 04:46:52 2024 returned same result, skipped Retried build at Mon Jun 24 05:20:01 2024 returned same result, skipped Retried build at Mon Aug 5 09:54:40 2024 returned same result, skipped Retried build at Tue Aug 6 15:20:44 2024 returned same result, skipped Retried build at Thu Aug 22 10:04:08 2024 returned same result, skipped Retried build at Mon Sep 9 04:54:17 2024 returned same result, skipped Retried build at Mon Oct 28 06:24:18 2024 returned same result, skipped