[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] cb6e89745294 started "build perl-PerlIO-gzip.spec" at Fri Apr 19 18:41:46 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-Base-ASAN' repository 'standard' arch 'armv7l' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 0s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/46] preinstalling libmagic-data... [ 1s] [2/46] preinstalling libncurses... [ 1s] [3/46] preinstalling setup... [ 1s] [4/46] preinstalling filesystem... [ 1s] [5/46] preinstalling glibc... [ 1s] [6/46] preinstalling libgcc... [ 1s] [7/46] preinstalling libstdc++... [ 1s] [8/46] preinstalling libasan... [ 1s] [9/46] preinstalling bash... [ 1s] [10/46] preinstalling diffutils... [ 1s] [11/46] preinstalling findutils... [ 1s] [12/46] preinstalling grep... [ 1s] [13/46] preinstalling libattr... [ 1s] [14/46] preinstalling libblkid... [ 1s] [15/46] preinstalling libbz2... [ 1s] [16/46] preinstalling libcap... [ 1s] [17/46] preinstalling libfreebl3... [ 1s] [18/46] preinstalling liblua... [ 1s] [19/46] preinstalling liblzma... [ 1s] [20/46] preinstalling libpopt... [ 1s] [21/46] preinstalling libreadline... [ 1s] [22/46] preinstalling libsmack... [ 1s] [23/46] preinstalling libsqlite... [ 1s] [24/46] preinstalling libuuid... [ 1s] [25/46] preinstalling libzstd1... [ 1s] [26/46] preinstalling nspr... [ 1s] [27/46] preinstalling sed... [ 1s] [28/46] preinstalling zlib... [ 1s] [29/46] preinstalling qemu-accel-x86_64-armv7l... [ 3s] [30/46] preinstalling qemu-linux-user-x86_64-cross... [ 3s] [31/46] preinstalling asan-build-env... [ 3s] [32/46] preinstalling coreutils... [ 3s] [33/46] preinstalling libacl... [ 3s] [34/46] preinstalling libelf... [ 3s] [35/46] preinstalling libmount... [ 3s] [36/46] preinstalling smack... [ 3s] [37/46] preinstalling bzip2... [ 3s] [38/46] preinstalling libmagic... [ 3s] [39/46] preinstalling libxml2... [ 3s] [40/46] preinstalling tar... [ 3s] [41/46] preinstalling util-linux... [ 3s] [42/46] preinstalling util-linux-su... [ 3s] [43/46] preinstalling nss... [ 3s] [44/46] preinstalling libsoftokn3... [ 3s] [45/46] preinstalling rpm... [ 4s] [46/46] preinstalling asan-force-options... [ 4s] running qemu-linux-user-x86_64-cross postinstall script [ 4s] qemu: Unsupported syscall: 397 [ 4s] qemu: Unsupported syscall: 397 [ 4s] qemu: Unsupported syscall: 397 [ 4s] running qemu-accel-x86_64-armv7l postinstall script [ 5s] running setup postinstall script [ 5s] chroot: failed to run command '': No such file or directory [ 5s] running asan-build-env postinstall script [ 5s] running asan-force-options postinstall script [ 8s] initializing rpm db... [ 8s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 8s] breaking dependency libasan -> glibc [ 8s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 8s] breaking dependency libasan -> libgcc [ 8s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 8s] breaking dependency libstdc++ -> glibc [ 8s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 8s] breaking dependency setup -> asan-runtime-env [ 8s] cycle: nss -> libsoftokn3 [ 8s] breaking dependency nss -> libsoftokn3 [ 8s] done [ 8s] querying package ids... [ 9s] [1/99] cumulate libmagic-data-5.45-1.6 [ 9s] [2/99] cumulate setup-0.9-1.11 [ 9s] [3/99] cumulate filesystem-3.1-1.2 [ 9s] [4/99] cumulate glibc-2.30-2.4 [ 9s] [5/99] cumulate libgcc-9.2.0-1.28 [ 9s] [6/99] cumulate libatomic-9.2.0-1.28 [ 9s] [7/99] cumulate libgfortran-9.2.0-1.28 [ 9s] [8/99] cumulate libgomp-9.2.0-1.28 [ 9s] [9/99] cumulate libitm-9.2.0-1.28 [ 9s] [10/99] cumulate libstdc++-9.2.0-1.28 [ 9s] [11/99] cumulate libstdc++-devel-9.2.0-1.28 [ 9s] [12/99] cumulate binutils-2.33.1-1.38 [ 9s] [13/99] cumulate libasan-9.2.0-1.28 [ 9s] [14/99] cumulate libcc1-9.2.0-1.28 [ 9s] [15/99] cumulate libubsan-9.2.0-1.28 [ 9s] [16/99] cumulate asan-runtime-env-9.2.0-3.22 [ 9s] [17/99] cumulate bash-3.2.57-1.19 [ 9s] [18/99] cumulate cpio-2.8-1.4 [ 9s] [19/99] cumulate diffutils-3.8-1.4 [ 9s] [20/99] cumulate findutils-4.3.8-2.9 [ 9s] [21/99] cumulate gdbm-1.8.3-1.44 [ 9s] [22/99] cumulate hostname-3.23-1.4 [ 9s] [23/99] cumulate libattr-2.5.1-1.41 [ 9s] [24/99] cumulate libblkid-2.39.3-2.1 [ 9s] [25/99] cumulate libbz2-1.0.8-1.37 [ 9s] [26/99] cumulate libcap-2.69-1.15 [ 9s] [27/99] cumulate libfreebl3-3.98-2.12 [ 9s] [28/99] cumulate libltdl-2.4.7-1.41 [ 9s] [29/99] cumulate liblua-5.1.5-1.36 [ 9s] [30/99] cumulate liblzma-5.4.5-1.5 [ 9s] [31/99] cumulate libopenssl3-3.0.13-1.19 [ 9s] [32/99] cumulate libpcre-8.45-1.28 [ 9s] [33/99] cumulate libpopt-1.16-1.38 [ 9s] [34/99] cumulate libsmack-1.3.1-1.35 [ 9s] [35/99] cumulate libsmartcols-2.39.3-2.1 [ 9s] [36/99] cumulate libsqlite-3.44.0-1.6 [ 9s] [37/99] cumulate libuuid-2.39.3-2.1 [ 9s] [38/99] cumulate libzstd1-1.5.5-1.6 [ 9s] [39/99] cumulate m4-1.4.19-1.4 [ 9s] [40/99] cumulate net-tools-2.0_20121208git-2.1 [ 9s] [41/99] cumulate nspr-4.35-1.36 [ 9s] [42/99] cumulate patch-2.7.6-1.37 [ 9s] [43/99] cumulate pkg-config-0.29.2-1.38 [ 9s] [44/99] cumulate sed-4.1c-1.4 [ 9s] [45/99] cumulate update-alternatives-1.22.2-2.1 [ 9s] [46/99] cumulate which-2.17-1.4 [ 9s] [47/99] cumulate zlib-1.3-2.12 [ 9s] [48/99] cumulate build-compare-2023.06.18-1.1 [ 9s] [49/99] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.23 [ 9s] [50/99] cumulate asan-build-env-9.2.0-3.22 [ 9s] [51/99] cumulate cpp-9.2.0-1.28 [ 9s] [52/99] cumulate gcc-c++-9.2.0-1.28 [ 9s] [53/99] cumulate coreutils-6.9-14.22 [ 9s] [54/99] cumulate gawk-3.1.5-1.4 [ 9s] [55/99] cumulate grep-2.5.2-1.4 [ 9s] [56/99] cumulate libacl-2.3.2-1.21 [ 9s] [57/99] cumulate libelf-0.189-1.40 [ 9s] [58/99] cumulate libmount-2.39.3-2.1 [ 9s] [59/99] cumulate make-4.3-1.37 [ 9s] [60/99] cumulate nss-certs-3.98-2.12 [ 9s] [61/99] cumulate smack-1.3.1-1.35 [ 9s] [62/99] cumulate bzip2-1.0.8-1.37 [ 9s] [63/99] cumulate libfdisk-2.39.3-2.1 [ 9s] [64/99] cumulate libmagic-5.45-1.6 [ 9s] [65/99] cumulate libxml2-2.12.5-1.8 [ 9s] [66/99] cumulate perl-5.38.0-1.9 [ 9s] [67/99] cumulate xz-5.4.5-1.5 [ 9s] [68/99] cumulate gcc-9.2.0-1.28 [ 9s] [69/99] cumulate build-mkbaselibs-20120927-1.2 [ 9s] [70/99] cumulate linux-glibc-devel-5.4-2.6 [ 9s] [71/99] cumulate qemu-accel-x86_64-armv7l-0.4-3.2 [ 9s] [72/99] cumulate terminfo-base-full-6.4-1.6 [ 9s] [73/99] cumulate autoconf-2.71-1.44 [ 9s] [74/99] cumulate glibc-locale-2.30-2.4 [ 9s] [75/99] cumulate file-5.45-1.6 [ 9s] [76/99] cumulate tar-1.17-1.4 [ 9s] [77/99] cumulate gzip-1.13-1.8 [ 9s] [78/99] cumulate pam-1.1.6-1.4 [ 9s] [79/99] cumulate tzdata-2023c-1.4 [ 9s] [80/99] cumulate libdw-0.189-1.40 [ 9s] [81/99] cumulate nss-3.98-2.12 [ 9s] [82/99] cumulate libarchive-3.7.2-1.5 [ 9s] [83/99] cumulate glibc-devel-2.30-2.4 [ 9s] [84/99] cumulate automake-1.16.5-1.41 [ 9s] [85/99] cumulate build-20120927-1.2 [ 9s] [86/99] cumulate libasm-0.189-1.40 [ 9s] [87/99] cumulate libncurses6-6.4-1.6 [ 9s] [88/99] cumulate libsoftokn3-3.98-2.12 [ 9s] [89/99] cumulate rpm-4.14.1.1-3.11 [ 9s] [90/99] cumulate libncurses-6.4-1.6 [ 9s] [91/99] cumulate zlib-devel-1.3-2.12 [ 9s] [92/99] cumulate asan-force-options-9.2.0-3.22 [ 9s] [93/99] cumulate less-608-1.4 [ 9s] [94/99] cumulate libreadline-5.2-1.40 [ 9s] [95/99] cumulate libtool-2.4.7-1.41 [ 9s] [96/99] cumulate elfutils-0.189-1.40 [ 9s] [97/99] cumulate rpm-build-4.14.1.1-3.11 [ 9s] [98/99] cumulate util-linux-2.39.3-2.1 [ 9s] [99/99] cumulate util-linux-su-2.39.3-2.1 [ 9s] now installing cumulated packages [ 9s] Preparing... ######################################## [ 9s] Updating / installing... [ 9s] asan-runtime-env-9.2.0-3.22 ######################################## [ 9s] setup-0.9-1.11 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 9s] ########################## [ 9s] filesystem-3.1-1.2 ######################################## [ 9s] glibc-2.30-2.4 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 9s] ######################################## [ 9s] libgcc-9.2.0-1.28 ######################################## [ 10s] libstdc++-9.2.0-1.28 ######################################## [ 10s] libasan-9.2.0-1.28 ######################################## [ 10s] libmagic-data-5.45-1.6 ######################################## [ 10s] bash-3.2.57-1.19 ######################################## [ 10s] zlib-1.3-2.12 ######################################## [ 11s] coreutils-6.9-14.22 ######################################## [ 11s] libbz2-1.0.8-1.37 ######################################## [ 11s] liblzma-5.4.5-1.5 ######################################## [ 11s] libelf-0.189-1.40 ######################################## [ 11s] libdw-0.189-1.40 ######################################## [ 11s] libmagic-5.45-1.6 ######################################## [ 12s] libblkid-2.39.3-2.1 ######################################## [ 12s] nspr-4.35-1.36 ######################################## [ 12s] pam-1.1.6-1.4 ######################################## [ 12s] libcap-2.69-1.15 ######################################## [ 13s] libfreebl3-3.98-2.12 ######################################## [ 13s] liblua-5.1.5-1.36 ######################################## [ 13s] libpopt-1.16-1.38 ######################################## [ 13s] libuuid-2.39.3-2.1 ######################################## [ 13s] libzstd1-1.5.5-1.6 ######################################## [ 14s] binutils-2.33.1-1.38 ######################################## [ 14s] linux-glibc-devel-5.4-2.6 ######################################## [ 14s] terminfo-base-full-6.4-1.6 ######################################## [ 14s] libncurses6-6.4-1.6 ######################################## [ 15s] glibc-devel-2.30-2.4 ######################################## [ 15s] libreadline-5.2-1.40 ######################################## [ 15s] libfdisk-2.39.3-2.1 ######################################## [ 15s] nss-certs-3.98-2.12 ######################################## [ 15s] libmount-2.39.3-2.1 ######################################## [ 15s] libasm-0.189-1.40 ######################################## [ 15s] libxml2-2.12.5-1.8 ######################################## [ 15s] xz-5.4.5-1.5 ######################################## [ 15s] bzip2-1.0.8-1.37 ######################################## [ 15s] gzip-1.13-1.8 ######################################## [ 15s] make-4.3-1.37 ######################################## [ 16s] findutils-4.3.8-2.9 ######################################## [ 16s] gdbm-1.8.3-1.44 ######################################## [ 17s] perl-5.38.0-1.9 ######################################## [ 17s] build-mkbaselibs-20120927-1.2 ######################################## [ 17s] libattr-2.5.1-1.41 ######################################## [ 17s] libacl-2.3.2-1.21 ######################################## [ 17s] tar-1.17-1.4 ######################################## [ 17s] libltdl-2.4.7-1.41 ######################################## [ 18s] libopenssl3-3.0.13-1.19 ######################################## [ 18s] libarchive-3.7.2-1.5 ######################################## [ 18s] libpcre-8.45-1.28 ######################################## [ 18s] libsmack-1.3.1-1.35 ######################################## [ 18s] libsmartcols-2.39.3-2.1 ######################################## [ 19s] libsqlite-3.44.0-1.6 ######################################## [ 19s] libsoftokn3-3.98-2.12 ######################################## [ 19s] nss-3.98-2.12 ######################################## [ 20s] rpm-4.14.1.1-3.11 ######################################## [ 21s] m4-1.4.19-1.4 ######################################## [ 21s] autoconf-2.71-1.44 ######################################## [ 21s] automake-1.16.5-1.41 ######################################## [ 21s] patch-2.7.6-1.37 ######################################## [ 21s] pkg-config-0.29.2-1.38 ######################################## [ 21s] sed-4.1c-1.4 ######################################## [ 21s] util-linux-2.39.3-2.1 ######################################## [ 21s] libcc1-9.2.0-1.28 ######################################## [ 22s] libubsan-9.2.0-1.28 ######################################## [ 22s] libatomic-9.2.0-1.28 ######################################## [ 22s] libgfortran-9.2.0-1.28 ######################################## [ 22s] libgomp-9.2.0-1.28 ######################################## [ 22s] libitm-9.2.0-1.28 ######################################## [ 23s] zlib-devel-1.3-2.12 ######################################## [ 23s] libtool-2.4.7-1.41 ######################################## [ 23s] build-20120927-1.2 ######################################## [ 23s] libncurses-6.4-1.6 ######################################## [ 23s] build-compare-2023.06.18-1.1 ######################################## [ 25s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 26s] asan-build-env-9.2.0-3.22 ######################################## [ 26s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 26s] libstdc++-devel-9.2.0-1.28 ######################################## [ 26s] gcc-9.2.0-1.28 ######################################## [ 34s] qemu-accel-x86_64-armv7l-0.4-3.2 ######################################## [ 35s] asan-force-options-9.2.0-3.22 ######################################## [ 38s] rpm-build-4.14.1.1-3.11 ######################################## [ 38s] util-linux-su-2.39.3-2.1 ######################################## [ 38s] smack-1.3.1-1.35 ######################################## [ 38s] grep-2.5.2-1.4 ######################################## [ 38s] elfutils-0.189-1.40 ######################################## [ 38s] less-608-1.4 ######################################## [ 38s] file-5.45-1.6 ######################################## [ 38s] glibc-locale-2.30-2.4 ######################################## [ 39s] tzdata-2023c-1.4 ######################################## [ 39s] cpp-9.2.0-1.28 ######################################## [ 39s] gcc-c++-9.2.0-1.28 ######################################## [ 39s] gawk-3.1.5-1.4 ######################################## [ 39s] cpio-2.8-1.4 ######################################## [ 39s] diffutils-3.8-1.4 ######################################## [ 39s] hostname-3.23-1.4 ######################################## [ 39s] net-tools-2.0_20121208git-2.1 ######################################## [ 39s] update-alternatives-1.22.2-2.1 ######################################## [ 39s] which-2.17-1.4 ######################################## [ 39s] now finalizing build dir... [ 40s] ----------------------------------------------------------------- [ 40s] I have the following modifications for perl-PerlIO-gzip.spec: [ 40s] 4c4 [ 40s] < Release: 1 [ 40s] --- [ 40s] > Release: 1.1 [ 41s] build target is armv7l-tizen-linux [ 41s] ----------------------------------------------------------------- [ 41s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 41s] ----------------------------------------------------------------- [ 41s] ----------------------------------------------------------------- [ 41s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 48s] Building target platforms: armv7l-tizen-linux [ 48s] Building for target armv7l-tizen-linux [ 48s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.o6oE98 [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + rm -rf perl-PerlIO-gzip-0.20 [ 48s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 48s] + /bin/tar -xof - [ 48s] + STATUS=0 [ 48s] + '[' 0 -ne 0 ']' [ 48s] + cd perl-PerlIO-gzip-0.20 [ 48s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 49s] + exit 0 [ 49s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0Qz468 [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd perl-PerlIO-gzip-0.20 [ 49s] + ref=/usr/lib/rpm [ 49s] + mints=0 [ 49s] + case $(uname -m) in [ 49s] ++ uname -m [ 49s] + for s in guess sub [ 49s] ++ find -maxdepth 8 -name config.guess [ 49s] + for s in guess sub [ 49s] ++ find -maxdepth 8 -name config.sub [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CFLAGS [ 49s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 49s] + export CXXFLAGS [ 49s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 49s] + export FFLAGS [ 49s] + LDFLAGS= [ 49s] + export LDFLAGS [ 49s] + perl Makefile.PL [ 53s] Checking if your kit is complete... [ 53s] Looks good [ 55s] Generating a Unix-style Makefile [ 55s] Writing Makefile for PerlIO::gzip [ 55s] Writing MYMETA.yml and MYMETA.json [ 55s] + make [ 65s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 65s] Running Mkbootstrap for gzip () [ 66s] chmod 644 "gzip.bs" [ 66s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 67s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 69s] mv gzip.xsc gzip.c [ 69s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" gzip.c [ 69s] In file included from gzip.xs:13: [ 69s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059: warning: "PERL_USE_SAFE_PUTENV" redefined [ 69s] 1059 | #define PERL_USE_SAFE_PUTENV [ 69s] | [ 69s] : note: this is the location of the previous definition [ 70s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6227, [ 70s] from gzip.xs:13: [ 70s] gzip.xs: In function 'PerlIOGzip_getarg': [ 70s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 70s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 70s] | ^~~~~~~~~~~~ [ 70s] gzip.xs:675:24: note: 'mode' was declared here [ 70s] 675 | register const char *mode; [ 70s] | ^~~~ [ 71s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 71s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 71s] -lz \ [ 71s] [ 71s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 74s] Manifying 1 pod document [ 74s] + exit 0 [ 74s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.M9Wfh8 [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd perl-PerlIO-gzip-0.20 [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 74s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 74s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 74s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm install_vendor [ 75s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 77s] Manifying 1 pod document [ 79s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 79s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 79s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 79s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man/man3/PerlIO::gzip.3 [ 79s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/info [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/packages [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip-0.20 [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/gtk-doc [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc [ 80s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man [ 80s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 80s] + xargs rm -f -- [ 80s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 80s] + xargs rm -f -- [ 80s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 80s] + xargs rm -f -- [ 80s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 80s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 80s] + xargs -0 -r rm [ 80s] + '[' armv7l == noarch ']' [ 80s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 80s] + FILES=perl-PerlIO-gzip.files [ 80s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 80s] + RES= [ 80s] + '[' -n '' ']' [ 80s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 80s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 80s] ++ sort [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] + continue [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 80s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 80s] + el=armv7l-linux-thread-multi [ 80s] + all_dir=(${all_dir[@]} $el) [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 80s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 80s] + el=armv7l-linux-thread-multi/PerlIO [ 80s] + all_dir=(${all_dir[@]} $el) [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 80s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 80s] + el=armv7l-linux-thread-multi/auto [ 80s] + all_dir=(${all_dir[@]} $el) [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 80s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 80s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 80s] + all_dir=(${all_dir[@]} $el) [ 80s] + for dir in '`find ${base_dir} -type d | sort`' [ 80s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 80s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 80s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 80s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 80s] + all_dir=(${all_dir[@]} $el) [ 80s] + for i in '${all_dir[@]}' [ 80s] + '[' armv7l-linux-thread-multi = auto ']' [ 80s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 80s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 80s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 80s] + RES= [ 80s] + '[' -n '' ']' [ 80s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 80s] + /bin/cat [ 80s] + for i in '${all_dir[@]}' [ 80s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 80s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 80s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO ']' [ 80s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 80s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 80s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 80s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 80s] + /bin/cat [ 80s] + for file in '$RES' [ 80s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 81s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 81s] + /bin/cat [ 81s] + for i in '${all_dir[@]}' [ 81s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 81s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 81s] + continue [ 81s] + for i in '${all_dir[@]}' [ 81s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 81s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 81s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 81s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 81s] + RES= [ 81s] + '[' -n '' ']' [ 81s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 81s] + /bin/cat [ 81s] + for i in '${all_dir[@]}' [ 81s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 81s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 81s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 81s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 81s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 81s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 81s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 81s] + /bin/cat [ 81s] + for file in '$RES' [ 81s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 81s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 81s] + /bin/cat [ 81s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man ']' [ 81s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 81s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/bin ']' [ 81s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 82s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 82s] 158 blocks [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 82s] + /usr/lib/rpm/check-buildroot [ 83s] + /usr/lib/rpm//brp-compress [ 83s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 83s] + /usr/lib/rpm/brp-python-hardlink [ 83s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 83s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 83s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 83s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 83s] Processing files: perl-PerlIO-gzip-0.20-1.1.armv7l [ 83s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(armv7l-32) = 0.20-1.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libasan.so.6 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 83s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(armv7l-32) = 0.20-1.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7l [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(armv7l-32) = 0.20-1.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Recommends: perl-PerlIO-gzip-debugsource(armv7l-32) = 0.20-1.1 [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 83s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-0.20-1.1.armv7l.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debugsource-0.20-1.1.armv7l.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7l.rpm [ 84s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.bjS65a [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd perl-PerlIO-gzip-0.20 [ 84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 84s] + exit 0 [ 84s] ... checking for files with abuild user/group [ 84s] ... creating baselibs [ 87s] ... comparing built packages with the former built [ 87s] /usr/lib/build/pkg-diff.sh [ 87s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.6.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 88s] This is not a prerelease project. Compare the project name. [ 88s] comparing the rpm tags of perl-PerlIO-gzip [ 88s] --- old-rpm-tags [ 88s] +++ new-rpm-tags [ 88s] @@ -7 +7 @@ [ 88s] -perl-PerlIO-gzip 0.18 (none) [ 88s] +perl-PerlIO-gzip 0.20 (none) [ 88s] @@ -72,2 +72 @@ [ 88s] -0001-Bump-to-perl-PerlIO-gzip-0.18.patch 0 (none) 100644 root root 0 4294967295 [ 88s] -lcov-0.18.tar.gz 0 (none) 100644 root root 0 4294967295 [ 88s] +lcov-0.20.tar.gz 0 (none) 100644 root root 0 4294967295 [ 88s] @@ -80,3 +79,2 @@ [ 88s] -0001-Bump-to-perl-PerlIO-gzip-0.18.patch a42a20a7525aa588c09e10514465e9da1ed172722d671a98879f0a0f640c555e 0 [ 88s] -lcov-0.18.tar.gz eff7d95b31ad43c7f836172e670c458581dd82d4ea45db0ce7a69dd63c55e627 0 [ 88s] -perl-PerlIO-gzip.spec e34a10f7e9bb2e9b1905122fe16b9ee0ab1f4b5f88775e6c3795aa6aa85619d6 32 [ 88s] +lcov-0.20.tar.gz d6843626b803c234a847e1f47c28ba638df54f02212a9a6de8e7592923343556 0 [ 88s] +perl-PerlIO-gzip.spec 333119491aac8c478cbcd84f54c086d8595a20254b3c9c38babcdf5ea3942379 32 [ 88s] @@ -93 +91 @@ [ 88s] -obs://127.0.0.1/Tizen-Base-ASAN/standard/ead501ba05dede29b7795f33a0cd0639-perl-PerlIO-gzip Tizen-Base-ASAN [ 88s] +obs://127.0.0.1/Tizen-Base-ASAN/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip Tizen-Base-ASAN [ 88s] comparing rpmtags [ 88s] --- old-rpmtags [ 88s] +++ new-rpmtags [ 88s] @@ -1,4 +1,4 @@ [ 88s] -perl-PerlIO-gzip 0.18 (none) [ 88s] +perl-PerlIO-gzip 0.20 (none) [ 88s] Perl extension to provide a PerlIO layer to gzip/gunzip [ 88s] PerlIO::gzip provides a PerlIO layer that manipulates files in the format [ 88s] used by the 'gzip' program. Compression and Decompression are implemented, [ 88s] RPM meta information is different [ 88s] [ 88s] cb6e89745294 finished "build perl-PerlIO-gzip.spec" at Fri Apr 19 18:43:14 UTC 2024. [ 88s] Retried build at Fri Apr 19 23:50:09 2024 returned same result, skipped Retried build at Sat Apr 20 01:46:03 2024 returned same result, skipped Retried build at Thu May 30 09:17:45 2024 returned same result, skipped Retried build at Wed Jun 19 04:36:47 2024 returned same result, skipped Retried build at Mon Jun 24 05:11:24 2024 returned same result, skipped Retried build at Mon Aug 5 09:48:31 2024 returned same result, skipped Retried build at Tue Aug 6 15:12:08 2024 returned same result, skipped Retried build at Thu Aug 22 09:51:50 2024 returned same result, skipped Retried build at Mon Sep 9 04:44:02 2024 returned same result, skipped Retried build at Mon Oct 28 06:14:24 2024 returned same result, skipped