[ 0s] Memory limit set to 71863554KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 0108a78018bc started "build python3-ply.spec" at Fri Jul 14 13:00:53 UTC 2023. [ 0s] [ 0s] Building python3-ply for project 'Tizen-Base-RISCV' repository 'standard' arch 'aarch64' srcmd5 '5867fa1722d1802c82e3ee69978a31ca' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/python3-ply.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/python3-ply.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/24/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/python3-ply.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/41] preinstalling libmagic-data... [ 3s] [2/41] preinstalling libncurses... [ 3s] [3/41] preinstalling setup... [ 3s] [4/41] preinstalling filesystem... [ 3s] [5/41] preinstalling glibc... [ 4s] [6/41] preinstalling bash... [ 4s] [7/41] preinstalling diffutils... [ 4s] [8/41] preinstalling grep... [ 4s] [9/41] preinstalling libattr... [ 4s] [10/41] preinstalling libblkid... [ 4s] [11/41] preinstalling libbz2... [ 4s] [12/41] preinstalling libcap... [ 4s] [13/41] preinstalling libfreebl3... [ 5s] [14/41] preinstalling libgcc... [ 5s] [15/41] preinstalling liblua... [ 5s] [16/41] preinstalling liblzma... [ 5s] [17/41] preinstalling libpopt... [ 5s] [18/41] preinstalling libreadline... [ 5s] [19/41] preinstalling libsmack... [ 5s] [20/41] preinstalling libsqlite... [ 5s] [21/41] preinstalling libuuid... [ 5s] [22/41] preinstalling libzstd1... [ 6s] [23/41] preinstalling nspr... [ 6s] [24/41] preinstalling sed... [ 6s] [25/41] preinstalling zlib... [ 6s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 17s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 22s] [28/41] preinstalling coreutils... [ 22s] [29/41] preinstalling libacl... [ 22s] [30/41] preinstalling libelf... [ 22s] [31/41] preinstalling libmount... [ 22s] [32/41] preinstalling smack... [ 22s] [33/41] preinstalling bzip2... [ 23s] [34/41] preinstalling libmagic... [ 23s] [35/41] preinstalling libxml2... [ 23s] [36/41] preinstalling tar... [ 23s] [37/41] preinstalling util-linux... [ 23s] [38/41] preinstalling util-linux-su... [ 24s] [39/41] preinstalling nss... [ 24s] [40/41] preinstalling libsoftokn3... [ 24s] [41/41] preinstalling rpm... [ 25s] running qemu-linux-user-x86_64-cross postinstall script [ 25s] running qemu-accel-x86_64-aarch64 postinstall script [ 25s] running setup postinstall script [ 25s] chroot: failed to run command '': No such file or directory [ 25s] initializing rpm db... [ 26s] reordering...cycle: libsoftokn3 -> nss [ 26s] breaking dependency nss -> libsoftokn3 [ 26s] done [ 26s] querying package ids... [ 27s] [1/105] cumulate libmagic-data-5.44-1.4 [ 27s] [2/105] cumulate setup-0.9-1.1 [ 27s] [3/105] cumulate filesystem-3.1-1.1 [ 27s] [4/105] cumulate glibc-2.37-1.8 [ 27s] [5/105] cumulate bash-3.2.57-1.1 [ 27s] [6/105] cumulate cpio-2.8-1.1 [ 27s] [7/105] cumulate diffutils-3.8-1.1 [ 27s] [8/105] cumulate fdupes-2.2.1-1.6 [ 27s] [9/105] cumulate findutils-4.3.8-1.6 [ 27s] [10/105] cumulate gdbm-1.8.3-1.8 [ 27s] [11/105] cumulate hostname-3.23-1.1 [ 27s] [12/105] cumulate libatomic-13.1.0-1.9 [ 27s] [13/105] cumulate libattr-2.5.1-1.6 [ 27s] [14/105] cumulate libblkid-2.37.4-3.2 [ 27s] [15/105] cumulate libbz2-1.0.8-1.6 [ 27s] [16/105] cumulate libcap-2.24-1.4 [ 27s] [17/105] cumulate libexpat-2.4.1-1.7 [ 27s] [18/105] cumulate libext2fs-1.46.0-1.6 [ 27s] [19/105] cumulate libffi-3.3-1.6 [ 27s] [20/105] cumulate libfreebl3-3.87-1.8 [ 27s] [21/105] cumulate libgcc-13.1.0-1.9 [ 27s] [22/105] cumulate libgomp-13.1.0-1.9 [ 27s] [23/105] cumulate libitm-13.1.0-1.9 [ 27s] [24/105] cumulate libltdl-2.4.6-1.8 [ 27s] [25/105] cumulate liblua-5.1.5-1.6 [ 27s] [26/105] cumulate liblzma-5.2.5-1.8 [ 27s] [27/105] cumulate libopenssl11-1.1.1t-1.8 [ 27s] [28/105] cumulate libpcre-8.45-1.1 [ 27s] [29/105] cumulate libpopt-1.16-1.4 [ 27s] [30/105] cumulate libpython3_91_0-3.9.10-1.8 [ 27s] [31/105] cumulate libsmack-1.3.1-1.4 [ 27s] [32/105] cumulate libsmartcols-2.37.4-3.2 [ 27s] [33/105] cumulate libsqlite-3.39.0-1.6 [ 27s] [34/105] cumulate libuuid-2.37.4-3.2 [ 27s] [35/105] cumulate libzstd1-1.5.2-1.6 [ 27s] [36/105] cumulate m4-1.4.19-1.1 [ 27s] [37/105] cumulate net-tools-2.0_20121208git-1.1 [ 27s] [38/105] cumulate nspr-4.35-1.4 [ 27s] [39/105] cumulate patch-2.7.6-1.4 [ 27s] [40/105] cumulate pkg-config-0.29.2-1.6 [ 27s] [41/105] cumulate sed-4.1c-1.1 [ 27s] [42/105] cumulate update-alternatives-1.20.5-1.1 [ 27s] [43/105] cumulate which-2.17-1.1 [ 27s] [44/105] cumulate zlib-1.2.13-1.7 [ 27s] [45/105] cumulate build-compare-2015.04.28-1.2 [ 27s] [46/105] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.4 [ 27s] [47/105] cumulate binutils-libs-2.40-1.8 [ 27s] [48/105] cumulate coreutils-6.9-14.2 [ 27s] [49/105] cumulate cpp-13.1.0-1.9 [ 27s] [50/105] cumulate gawk-3.1.5-1.1 [ 27s] [51/105] cumulate gcc-c++-13.1.0-1.9 [ 27s] [52/105] cumulate grep-2.5.2-1.1 [ 27s] [53/105] cumulate libacl-2.2.53-1.6 [ 27s] [54/105] cumulate libelf-0.189-1.8 [ 27s] [55/105] cumulate libgfortran-13.1.0-1.9 [ 27s] [56/105] cumulate libmount-2.37.4-3.2 [ 27s] [57/105] cumulate libstdc++-13.1.0-1.9 [ 27s] [58/105] cumulate make-4.3-1.7 [ 27s] [59/105] cumulate nss-certs-3.87-1.8 [ 27s] [60/105] cumulate smack-1.3.1-1.4 [ 27s] [61/105] cumulate bzip2-1.0.8-1.6 [ 27s] [62/105] cumulate libfdisk-2.37.4-3.2 [ 27s] [63/105] cumulate libmagic-5.44-1.4 [ 27s] [64/105] cumulate libxml2-2.10.2-1.6 [ 27s] [65/105] cumulate perl-5.34.0-1.6 [ 27s] [66/105] cumulate xz-5.2.5-1.8 [ 27s] [67/105] cumulate build-mkbaselibs-20120927-1.1 [ 27s] [68/105] cumulate libstdc++-devel-13.1.0-1.9 [ 27s] [69/105] cumulate file-5.44-1.4 [ 27s] [70/105] cumulate linux-glibc-devel-5.4-1.8 [ 27s] [71/105] cumulate tar-1.17-1.1 [ 27s] [72/105] cumulate terminfo-base-full-6.2-1.8 [ 27s] [73/105] cumulate autoconf-2.71-1.8 [ 27s] [74/105] cumulate glibc-locale-2.37-1.8 [ 27s] [75/105] cumulate gzip-1.3.12-1.4 [ 27s] [76/105] cumulate libcc1-13.1.0-1.9 [ 27s] [77/105] cumulate libhwasan-13.1.0-1.9 [ 27s] [78/105] cumulate libubsan-13.1.0-1.9 [ 27s] [79/105] cumulate pam-1.1.6-1.1 [ 27s] [80/105] cumulate binutils-2.40-1.8 [ 27s] [81/105] cumulate tzdata-2023c-1.1 [ 27s] [82/105] cumulate libdw-0.189-1.8 [ 27s] [83/105] cumulate libarchive-3.6.2-1.8 [ 27s] [84/105] cumulate automake-1.16.5-1.8 [ 27s] [85/105] cumulate libasm-0.189-1.8 [ 27s] [86/105] cumulate libncurses6-6.2-1.8 [ 27s] [87/105] cumulate build-20120927-1.1 [ 27s] [88/105] cumulate gcc-13.1.0-1.9 [ 27s] [89/105] cumulate libncurses-6.2-1.8 [ 27s] [90/105] cumulate less-466-1.1 [ 27s] [91/105] cumulate libreadline-5.2-1.6 [ 27s] [92/105] cumulate procps-ng-3.3.17-1.1 [ 27s] [93/105] cumulate qemu-accel-x86_64-aarch64-0.4-4.4 [ 27s] [94/105] cumulate glibc-devel-2.37-1.8 [ 27s] [95/105] cumulate libtool-2.4.6-1.8 [ 27s] [96/105] cumulate elfutils-0.189-1.8 [ 27s] [97/105] cumulate python3-base-3.9.10-1.8 [ 27s] [98/105] cumulate util-linux-2.37.4-3.2 [ 27s] [99/105] cumulate python3-3.9.10-1.1 [ 27s] [100/105] cumulate util-linux-su-2.37.4-3.2 [ 27s] [101/105] cumulate python3-setuptools-63.2.0-1.1 [ 27s] [102/105] cumulate nss-3.87-1.8 [ 27s] [103/105] cumulate libsoftokn3-3.87-1.8 [ 27s] [104/105] cumulate rpm-4.14.1.1-1.8 [ 27s] [105/105] cumulate rpm-build-4.14.1.1-1.8 [ 27s] now installing cumulated packages [ 28s] Preparing... ######################################## [ 28s] Updating / installing... [ 28s] setup-0.9-1.1 ######################################## [ 28s] filesystem-3.1-1.1 ######################################## [ 28s] glibc-2.37-1.8 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 28s] ######################################## [ 29s] bash-3.2.57-1.1 ######################################## [ 29s] zlib-1.2.13-1.7 ######################################## [ 29s] libgcc-13.1.0-1.9 ######################################## [ 29s] libstdc++-13.1.0-1.9 ######################################## [ 29s] libbz2-1.0.8-1.6 ######################################## [ 30s] liblzma-5.2.5-1.8 ######################################## [ 30s] coreutils-6.9-14.2 ######################################## [ 30s] libelf-0.189-1.8 ######################################## [ 30s] libdw-0.189-1.8 ######################################## [ 31s] libblkid-2.37.4-3.2 ######################################## [ 31s] nspr-4.35-1.4 ######################################## [ 31s] pam-1.1.6-1.1 ######################################## [ 31s] gdbm-1.8.3-1.8 ######################################## [ 35s] perl-5.34.0-1.6 ######################################## [ 35s] libcap-2.24-1.4 ######################################## [ 36s] libfreebl3-3.87-1.8 ######################################## [ 36s] liblua-5.1.5-1.6 ######################################## [ 36s] libopenssl11-1.1.1t-1.8 ######################################## [ 37s] libpopt-1.16-1.4 ######################################## [ 37s] libsqlite-3.39.0-1.6 ######################################## [ 38s] libuuid-2.37.4-3.2 ######################################## [ 38s] libzstd1-1.5.2-1.6 ######################################## [ 38s] libfdisk-2.37.4-3.2 ######################################## [ 39s] build-mkbaselibs-20120927-1.1 ######################################## [ 39s] nss-certs-3.87-1.8 ######################################## [ 39s] libsoftokn3-3.87-1.8 ######################################## [ 39s] nss-3.87-1.8 ######################################## [ 40s] libmount-2.37.4-3.2 ######################################## [ 40s] libasm-0.189-1.8 ######################################## [ 40s] linux-glibc-devel-5.4-1.8 ######################################## [ 41s] terminfo-base-full-6.2-1.8 ######################################## [ 41s] libncurses6-6.2-1.8 ######################################## [ 41s] libreadline-5.2-1.6 ######################################## [ 42s] gzip-1.3.12-1.4 ######################################## [ 42s] libxml2-2.10.2-1.6 ######################################## [ 42s] xz-5.2.5-1.8 ######################################## [ 42s] bzip2-1.0.8-1.6 ######################################## [ 42s] libcc1-13.1.0-1.9 ######################################## [ 42s] libhwasan-13.1.0-1.9 ######################################## [ 42s] libubsan-13.1.0-1.9 ######################################## [ 43s] libgfortran-13.1.0-1.9 ######################################## [ 43s] binutils-libs-2.40-1.8 ######################################## [ 44s] binutils-2.40-1.8 ######################################## [ 44s] make-4.3-1.7 ######################################## [ 44s] findutils-4.3.8-1.6 ######################################## [ 44s] libatomic-13.1.0-1.9 ######################################## [ 44s] libattr-2.5.1-1.6 ######################################## [ 44s] libacl-2.2.53-1.6 ######################################## [ 45s] tar-1.17-1.1 ######################################## [ 45s] libarchive-3.6.2-1.8 ######################################## [ 45s] libexpat-2.4.1-1.7 ######################################## [ 45s] libffi-3.3-1.6 ######################################## [ 45s] libgomp-13.1.0-1.9 ######################################## [ 45s] libitm-13.1.0-1.9 ######################################## [ 49s] gcc-13.1.0-1.9 ######################################## [ 50s] glibc-devel-2.37-1.8 ######################################## [ 50s] libltdl-2.4.6-1.8 ######################################## [ 50s] libpcre-8.45-1.1 ######################################## [ 51s] libpython3_91_0-3.9.10-1.8 ######################################## [ 52s] python3-base-3.9.10-1.8 ######################################## [ 52s] python3-3.9.10-1.1 ######################################## [ 52s] libsmack-1.3.1-1.4 ######################################## [ 53s] libsmartcols-2.37.4-3.2 ######################################## [ 53s] m4-1.4.19-1.1 ######################################## [ 53s] autoconf-2.71-1.8 ######################################## [ 53s] automake-1.16.5-1.8 ######################################## [ 53s] patch-2.7.6-1.4 ######################################## [ 53s] sed-4.1c-1.1 ######################################## [ 54s] util-linux-2.37.4-3.2 ######################################## [ 55s] libmagic-data-5.44-1.4 ######################################## [ 55s] libmagic-5.44-1.4 ######################################## [ 56s] rpm-4.14.1.1-1.8 ######################################## [ 56s] rpm-build-4.14.1.1-1.8 ######################################## [ 56s] file-5.44-1.4 ######################################## [ 56s] util-linux-su-2.37.4-3.2 ######################################## [ 56s] libtool-2.4.6-1.8 ######################################## [ 56s] smack-1.3.1-1.4 ######################################## [ 57s] python3-setuptools-63.2.0-1.1 ######################################## [ 57s] grep-2.5.2-1.1 ######################################## [ 76s] qemu-accel-x86_64-aarch64-0.4-4.4 ######################################## [ 77s] build-20120927-1.1 ######################################## [ 77s] libncurses-6.2-1.8 ######################################## [ 77s] less-466-1.1 ######################################## [ 77s] procps-ng-3.3.17-1.1 ######################################## [ 77s] elfutils-0.189-1.8 ######################################## [ 78s] glibc-locale-2.37-1.8 ######################################## [ 78s] tzdata-2023c-1.1 ######################################## [ 79s] libstdc++-devel-13.1.0-1.9 ######################################## [ 82s] cpp-13.1.0-1.9 ######################################## [ 85s] gcc-c++-13.1.0-1.9 ######################################## [ 85s] build-compare-2015.04.28-1.2 ######################################## [ 93s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 94s] gawk-3.1.5-1.1 ######################################## [ 94s] cpio-2.8-1.1 ######################################## [ 94s] diffutils-3.8-1.1 ######################################## [ 94s] fdupes-2.2.1-1.6 ######################################## [ 94s] hostname-3.23-1.1 ######################################## [ 94s] libext2fs-1.46.0-1.6 ######################################## [ 94s] net-tools-2.0_20121208git-1.1 ######################################## [ 94s] pkg-config-0.29.2-1.6 ######################################## [ 94s] update-alternatives-1.20.5-1.1 ######################################## [ 94s] which-2.17-1.1 ######################################## [ 96s] now finalizing build dir... [ 97s] ----------------------------------------------------------------- [ 97s] I have the following modifications for python3-ply.spec: [ 97s] 4c4 [ 97s] < Release: 0 [ 97s] --- [ 97s] > Release: 1.1 [ 98s] build target is aarch64-tizen-linux [ 98s] ----------------------------------------------------------------- [ 98s] ----- building python3-ply.spec (user abuild) [ 98s] ----------------------------------------------------------------- [ 98s] ----------------------------------------------------------------- [ 98s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-RISCV/standard/5867fa1722d1802c82e3ee69978a31ca-python3-ply' /home/abuild/rpmbuild/SOURCES/python3-ply.spec [ 98s] Building target platforms: aarch64-tizen-linux [ 98s] Building for target aarch64-tizen-linux [ 98s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.eKfIEx [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + rm -rf ply-3.11 [ 98s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/ply-3.11.tar.gz [ 98s] + /bin/tar -xof - [ 98s] + STATUS=0 [ 98s] + '[' 0 -ne 0 ']' [ 98s] + cd ply-3.11 [ 98s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 98s] + echo 'Patch #0 (0001-Add-packaging-files.patch):' [ 98s] Patch #0 (0001-Add-packaging-files.patch): [ 98s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 98s] patching file LICENSE [ 98s] + cp /home/abuild/rpmbuild/SOURCES/python3-ply.manifest . [ 98s] + chmod -x test/testlex.py [ 99s] + find example -type f -name '*.py' -exec sed -i 's|#!/usr/bin/env python3||' '{}' + [ 99s] + _target= [ 99s] + _symlinks=0 [ 99s] + _files=() [ 99s] + fdupes -q -n -r example [ 99s] + read _file [ 99s] + exit 0 [ 99s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hU7ZNB [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd ply-3.11 [ 99s] ++ uname -m [ 99s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 99s] + ref=/usr/lib/rpm [ 99s] + for s in guess sub [ 99s] ++ find -maxdepth 8 -name config.guess [ 99s] + for s in guess sub [ 99s] ++ find -maxdepth 8 -name config.sub [ 99s] + LANG=C [ 99s] + export LANG [ 99s] + unset DISPLAY [ 99s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 99s] + export CFLAGS [ 99s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 99s] + export CXXFLAGS [ 99s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 99s] + export FFLAGS [ 99s] + LDFLAGS= [ 99s] + export LDFLAGS [ 99s] + /usr/bin/python3 setup.py build [ 103s] /usr/lib/python3.9/site-packages/setuptools/dist.py:771: UserWarning: Usage of dash-separated 'description-file' will not be supported in future versions. Please use the underscore name 'description_file' instead [ 104s] warnings.warn( [ 104s] running build [ 104s] running build_py [ 104s] creating build [ 104s] creating build/lib [ 104s] creating build/lib/ply [ 104s] copying ply/yacc.py -> build/lib/ply [ 104s] copying ply/__init__.py -> build/lib/ply [ 104s] copying ply/lex.py -> build/lib/ply [ 104s] copying ply/cpp.py -> build/lib/ply [ 104s] copying ply/ctokens.py -> build/lib/ply [ 104s] copying ply/ygen.py -> build/lib/ply [ 104s] + exit 0 [ 104s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.N4UJOT [ 104s] + umask 022 [ 104s] + cd /home/abuild/rpmbuild/BUILD [ 104s] + cd ply-3.11 [ 104s] + LANG=C [ 104s] + export LANG [ 104s] + unset DISPLAY [ 104s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 104s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 104s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 106s] /usr/lib/python3.9/site-packages/setuptools/dist.py:771: UserWarning: Usage of dash-separated 'description-file' will not be supported in future versions. Please use the underscore name 'description_file' instead [ 106s] warnings.warn( [ 107s] running install [ 107s] /usr/lib/python3.9/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools. [ 107s] warnings.warn( [ 107s] running build [ 107s] running build_py [ 107s] running install_lib [ 107s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr [ 107s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib [ 107s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9 [ 107s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages [ 107s] creating /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/yacc.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/__init__.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/lex.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/cpp.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/ctokens.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] copying build/lib/ply/ygen.py -> /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/yacc.py to yacc.cpython-39.pyc [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/__init__.py to __init__.cpython-39.pyc [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/lex.py to lex.cpython-39.pyc [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/cpp.py to cpp.cpython-39.pyc [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/ctokens.py to ctokens.cpython-39.pyc [ 107s] byte-compiling /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply/ygen.py to ygen.cpython-39.pyc [ 107s] running install_egg_info [ 108s] running egg_info [ 108s] writing ply.egg-info/PKG-INFO [ 108s] writing dependency_links to ply.egg-info/dependency_links.txt [ 108s] writing top-level names to ply.egg-info/top_level.txt [ 108s] reading manifest file 'ply.egg-info/SOURCES.txt' [ 108s] reading manifest template 'MANIFEST.in' [ 108s] warning: no previously-included files matching '*.pyc' found anywhere in distribution [ 108s] adding license file 'LICENSE' [ 108s] writing manifest file 'ply.egg-info/SOURCES.txt' [ 108s] Copying ply.egg-info to /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages/ply-3.11-py3.9.egg-info [ 108s] running install_scripts [ 108s] + _target= [ 108s] + _symlinks=0 [ 108s] + _files=() [ 108s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/lib/python3.9/site-packages [ 108s] + read _file [ 108s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.11-1.1 --unique-debug-src-base python3-ply-3.11-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/ply-3.11 [ 109s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debuginfo.manifest [ 109s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/ply-3.11/python3-ply-debugsource.manifest [ 109s] + /usr/lib/rpm/check-buildroot [ 109s] + /usr/lib/rpm//brp-compress [ 109s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 109s] + /usr/lib/rpm/brp-python-hardlink [ 110s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 110s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/ply-3.11/isu.list [ 110s] ~/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 ~/rpmbuild/BUILD/ply-3.11 [ 110s] ~/rpmbuild/BUILD/ply-3.11 [ 110s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.x8sziO [ 110s] Processing files: python3-ply-3.11-1.1.noarch [ 110s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 110s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 110s] [ 110s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.5Kl7Sp [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd ply-3.11 [ 110s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/share/licenses/python3-ply [ 110s] + export LC_ALL=C [ 110s] + LC_ALL=C [ 110s] + export LICENSEDIR [ 110s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/share/licenses/python3-ply [ 110s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64/usr/share/licenses/python3-ply [ 110s] + exit 0 [ 112s] Provides: python3-ply = 3.11-1.1 [ 112s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 112s] Requires: python(abi) = 3.9 [ 112s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 112s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-ply-3.11-1.1.src.rpm [ 112s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-ply-3.11-1.1.noarch.rpm [ 112s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.y1rqdi [ 112s] + umask 022 [ 112s] + cd /home/abuild/rpmbuild/BUILD [ 112s] + cd ply-3.11 [ 112s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-ply-3.11-1.1.aarch64 [ 112s] + exit 0 [ 112s] ... checking for files with abuild user/group [ 113s] ... creating baselibs [ 114s] [ 114s] 0108a78018bc finished "build python3-ply.spec" at Fri Jul 14 13:02:47 UTC 2023. [ 114s] Retried build at Fri Jul 14 15:42:04 2023 returned same result, skipped Retried build at Mon Jul 17 11:12:44 2023 returned same result, skipped