[ 0s] Memory limit set to 71863554KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 0108a78018bc started "build libpciaccess.spec" at Fri Jul 14 14:29:43 UTC 2023. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-Base-RISCV' repository 'standard' arch 'armv7l' srcmd5 'd4f55a0f31cd367faea6546b61610b8c' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec build ... [ 2s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 3s] [6/41] preinstalling libgcc... [ 3s] [7/41] preinstalling bash... [ 3s] [8/41] preinstalling diffutils... [ 3s] [9/41] preinstalling grep... [ 3s] [10/41] preinstalling libattr... [ 3s] [11/41] preinstalling libblkid... [ 3s] [12/41] preinstalling libbz2... [ 3s] [13/41] preinstalling libcap... [ 3s] [14/41] preinstalling libfreebl3... [ 3s] [15/41] preinstalling liblua... [ 3s] [16/41] preinstalling liblzma... [ 3s] [17/41] preinstalling libpopt... [ 3s] [18/41] preinstalling libreadline... [ 3s] [19/41] preinstalling libsmack... [ 3s] [20/41] preinstalling libsqlite... [ 3s] [21/41] preinstalling libuuid... [ 3s] [22/41] preinstalling libzstd1... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 17s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 20s] [28/41] preinstalling coreutils... [ 20s] [29/41] preinstalling libacl... [ 20s] [30/41] preinstalling libelf... [ 20s] [31/41] preinstalling libmount... [ 20s] [32/41] preinstalling smack... [ 20s] [33/41] preinstalling bzip2... [ 20s] [34/41] preinstalling libmagic... [ 20s] [35/41] preinstalling libxml2... [ 20s] [36/41] preinstalling tar... [ 20s] [37/41] preinstalling util-linux... [ 21s] [38/41] preinstalling util-linux-su... [ 21s] [39/41] preinstalling nss... [ 21s] [40/41] preinstalling libsoftokn3... [ 21s] [41/41] preinstalling rpm... [ 21s] running qemu-linux-user-x86_64-cross postinstall script [ 22s] running qemu-accel-x86_64-armv7l postinstall script [ 22s] running setup postinstall script [ 22s] chroot: failed to run command '': No such file or directory [ 22s] initializing rpm db... [ 22s] reordering...cycle: libsoftokn3 -> nss [ 22s] breaking dependency nss -> libsoftokn3 [ 22s] done [ 22s] querying package ids... [ 23s] [1/99] cumulate libmagic-data-5.44-1.7 [ 23s] [2/99] cumulate setup-0.9-1.1 [ 23s] [3/99] cumulate filesystem-3.1-1.1 [ 23s] [4/99] cumulate glibc-2.37-1.8 [ 23s] [5/99] cumulate libatomic-13.1.0-1.7 [ 23s] [6/99] cumulate libgcc-13.1.0-1.7 [ 23s] [7/99] cumulate bash-3.2.57-1.1 [ 23s] [8/99] cumulate cpio-2.8-1.1 [ 23s] [9/99] cumulate diffutils-3.8-1.1 [ 23s] [10/99] cumulate findutils-4.3.8-1.7 [ 23s] [11/99] cumulate gdbm-1.8.3-1.8 [ 23s] [12/99] cumulate hostname-3.23-1.1 [ 23s] [13/99] cumulate libattr-2.5.1-1.7 [ 23s] [14/99] cumulate libblkid-2.37.4-3.2 [ 23s] [15/99] cumulate libbz2-1.0.8-1.8 [ 23s] [16/99] cumulate libcap-2.24-1.7 [ 23s] [17/99] cumulate libext2fs-1.46.0-1.7 [ 23s] [18/99] cumulate libfreebl3-3.87-1.8 [ 23s] [19/99] cumulate libgfortran-13.1.0-1.7 [ 23s] [20/99] cumulate libgomp-13.1.0-1.7 [ 23s] [21/99] cumulate libitm-13.1.0-1.7 [ 23s] [22/99] cumulate libltdl-2.4.6-1.8 [ 23s] [23/99] cumulate liblua-5.1.5-1.7 [ 23s] [24/99] cumulate liblzma-5.2.5-1.8 [ 23s] [25/99] cumulate libopenssl11-1.1.1t-1.8 [ 23s] [26/99] cumulate libpcre-8.45-1.2 [ 23s] [27/99] cumulate libpopt-1.16-1.7 [ 23s] [28/99] cumulate libsmack-1.3.1-1.7 [ 23s] [29/99] cumulate libsmartcols-2.37.4-3.2 [ 23s] [30/99] cumulate libsqlite-3.39.0-1.8 [ 23s] [31/99] cumulate libstdc++-13.1.0-1.7 [ 23s] [32/99] cumulate libuuid-2.37.4-3.2 [ 23s] [33/99] cumulate libzstd1-1.5.2-1.7 [ 23s] [34/99] cumulate m4-1.4.19-1.1 [ 23s] [35/99] cumulate net-tools-2.0_20121208git-1.1 [ 23s] [36/99] cumulate nspr-4.35-1.7 [ 23s] [37/99] cumulate patch-2.7.6-1.7 [ 23s] [38/99] cumulate pkg-config-0.29.2-1.8 [ 23s] [39/99] cumulate sed-4.1c-1.1 [ 23s] [40/99] cumulate update-alternatives-1.20.5-1.1 [ 23s] [41/99] cumulate which-2.17-1.1 [ 23s] [42/99] cumulate zlib-1.2.13-1.8 [ 23s] [43/99] cumulate build-compare-2015.04.28-1.3 [ 23s] [44/99] cumulate libstdc++-devel-13.1.0-1.7 [ 23s] [45/99] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.4 [ 23s] [46/99] cumulate util-macros-1.19.0-1.1 [ 23s] [47/99] cumulate cpp-13.1.0-1.7 [ 23s] [48/99] cumulate gcc-c++-13.1.0-1.7 [ 23s] [49/99] cumulate binutils-libs-2.40-1.8 [ 23s] [50/99] cumulate coreutils-6.9-14.3 [ 23s] [51/99] cumulate gawk-3.1.5-1.1 [ 23s] [52/99] cumulate grep-2.5.2-1.1 [ 23s] [53/99] cumulate libacl-2.2.53-1.7 [ 23s] [54/99] cumulate libcc1-13.1.0-1.7 [ 23s] [55/99] cumulate libelf-0.189-1.8 [ 23s] [56/99] cumulate libmount-2.37.4-3.2 [ 23s] [57/99] cumulate libubsan-13.1.0-1.7 [ 23s] [58/99] cumulate make-4.3-1.7 [ 23s] [59/99] cumulate nss-certs-3.87-1.8 [ 23s] [60/99] cumulate smack-1.3.1-1.7 [ 23s] [61/99] cumulate bzip2-1.0.8-1.8 [ 23s] [62/99] cumulate libfdisk-2.37.4-3.2 [ 23s] [63/99] cumulate libmagic-5.44-1.7 [ 23s] [64/99] cumulate libxml2-2.10.2-1.8 [ 23s] [65/99] cumulate perl-5.34.0-1.8 [ 23s] [66/99] cumulate xz-5.2.5-1.8 [ 23s] [67/99] cumulate build-mkbaselibs-20120927-1.1 [ 23s] [68/99] cumulate linux-glibc-devel-5.4-1.8 [ 23s] [69/99] cumulate terminfo-base-full-6.2-1.8 [ 23s] [70/99] cumulate autoconf-2.71-1.8 [ 23s] [71/99] cumulate file-5.44-1.7 [ 23s] [72/99] cumulate glibc-locale-2.37-1.8 [ 23s] [73/99] cumulate tar-1.17-1.1 [ 23s] [74/99] cumulate binutils-2.40-1.8 [ 23s] [75/99] cumulate gzip-1.3.12-1.7 [ 23s] [76/99] cumulate pam-1.1.6-2.4 [ 23s] [77/99] cumulate tzdata-2023c-1.1 [ 23s] [78/99] cumulate libdw-0.189-1.8 [ 23s] [79/99] cumulate libarchive-3.6.2-1.8 [ 23s] [80/99] cumulate gcc-13.1.0-1.7 [ 23s] [81/99] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 23s] [82/99] cumulate automake-1.16.5-1.8 [ 23s] [83/99] cumulate glibc-devel-2.37-1.8 [ 23s] [84/99] cumulate libasm-0.189-1.8 [ 23s] [85/99] cumulate libncurses6-6.2-1.8 [ 23s] [86/99] cumulate build-20120927-1.1 [ 23s] [87/99] cumulate libncurses-6.2-1.8 [ 23s] [88/99] cumulate less-466-1.1 [ 23s] [89/99] cumulate libreadline-5.2-1.8 [ 23s] [90/99] cumulate procps-ng-3.3.17-1.1 [ 23s] [91/99] cumulate zlib-devel-1.2.13-1.8 [ 23s] [92/99] cumulate libtool-2.4.6-1.8 [ 23s] [93/99] cumulate elfutils-0.189-1.8 [ 23s] [94/99] cumulate util-linux-2.37.4-3.2 [ 23s] [95/99] cumulate util-linux-su-2.37.4-3.2 [ 23s] [96/99] cumulate nss-3.87-1.8 [ 23s] [97/99] cumulate libsoftokn3-3.87-1.8 [ 23s] [98/99] cumulate rpm-4.14.1.1-1.8 [ 23s] [99/99] cumulate rpm-build-4.14.1.1-1.8 [ 23s] now installing cumulated packages [ 23s] Preparing... ######################################## [ 23s] Updating / installing... [ 23s] setup-0.9-1.1 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 23s] ########################## [ 23s] filesystem-3.1-1.1 ######################################## [ 23s] libmagic-data-5.44-1.7 ######################################## [ 23s] glibc-2.37-1.8 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 24s] ######################################## [ 24s] libgcc-13.1.0-1.7 ######################################## [ 24s] bash-3.2.57-1.1 ######################################## [ 24s] zlib-1.2.13-1.8 ######################################## [ 25s] libstdc++-13.1.0-1.7 ######################################## [ 25s] coreutils-6.9-14.3 ######################################## [ 26s] libbz2-1.0.8-1.8 ######################################## [ 26s] liblzma-5.2.5-1.8 ######################################## [ 26s] libelf-0.189-1.8 ######################################## [ 26s] libdw-0.189-1.8 ######################################## [ 27s] libmagic-5.44-1.7 ######################################## [ 27s] libblkid-2.37.4-3.2 ######################################## [ 27s] nspr-4.35-1.7 ######################################## [ 28s] pam-1.1.6-2.4 ######################################## [ 28s] libcap-2.24-1.7 ######################################## [ 28s] libfreebl3-3.87-1.8 ######################################## [ 28s] liblua-5.1.5-1.7 ######################################## [ 29s] libpopt-1.16-1.7 ######################################## [ 29s] libuuid-2.37.4-3.2 ######################################## [ 29s] libzstd1-1.5.2-1.7 ######################################## [ 30s] pkg-config-0.29.2-1.8 ######################################## [ 30s] linux-glibc-devel-5.4-1.8 ######################################## [ 30s] terminfo-base-full-6.2-1.8 ######################################## [ 30s] libncurses6-6.2-1.8 ######################################## [ 31s] libreadline-5.2-1.8 ######################################## [ 31s] libfdisk-2.37.4-3.2 ######################################## [ 31s] nss-certs-3.87-1.8 ######################################## [ 31s] libmount-2.37.4-3.2 ######################################## [ 31s] libasm-0.189-1.8 ######################################## [ 31s] libxml2-2.10.2-1.8 ######################################## [ 32s] xz-5.2.5-1.8 ######################################## [ 32s] bzip2-1.0.8-1.8 ######################################## [ 32s] gzip-1.3.12-1.7 ######################################## [ 32s] libcc1-13.1.0-1.7 ######################################## [ 32s] libubsan-13.1.0-1.7 ######################################## [ 32s] binutils-libs-2.40-1.8 ######################################## [ 33s] binutils-2.40-1.8 ######################################## [ 33s] make-4.3-1.7 ######################################## [ 33s] findutils-4.3.8-1.7 ######################################## [ 33s] gdbm-1.8.3-1.8 ######################################## [ 38s] perl-5.34.0-1.8 ######################################## [ 38s] build-mkbaselibs-20120927-1.1 ######################################## [ 38s] libattr-2.5.1-1.7 ######################################## [ 38s] libacl-2.2.53-1.7 ######################################## [ 38s] tar-1.17-1.1 ######################################## [ 38s] libgfortran-13.1.0-1.7 ######################################## [ 38s] libgomp-13.1.0-1.7 ######################################## [ 39s] libitm-13.1.0-1.7 ######################################## [ 39s] libltdl-2.4.6-1.8 ######################################## [ 39s] libopenssl11-1.1.1t-1.8 ######################################## [ 39s] libarchive-3.6.2-1.8 ######################################## [ 40s] libpcre-8.45-1.2 ######################################## [ 40s] libsmack-1.3.1-1.7 ######################################## [ 41s] libsmartcols-2.37.4-3.2 ######################################## [ 41s] libsqlite-3.39.0-1.8 ######################################## [ 41s] libsoftokn3-3.87-1.8 ######################################## [ 42s] nss-3.87-1.8 ######################################## [ 43s] rpm-4.14.1.1-1.8 ######################################## [ 43s] m4-1.4.19-1.1 ######################################## [ 43s] autoconf-2.71-1.8 ######################################## [ 43s] automake-1.16.5-1.8 ######################################## [ 43s] patch-2.7.6-1.7 ######################################## [ 43s] sed-4.1c-1.1 ######################################## [ 44s] util-linux-2.37.4-3.2 ######################################## [ 44s] libatomic-13.1.0-1.7 ######################################## [ 44s] libtool-2.4.6-1.8 ######################################## [ 44s] build-20120927-1.1 ######################################## [ 44s] libncurses-6.2-1.8 ######################################## [ 44s] util-macros-1.19.0-1.1 ######################################## [ 45s] libstdc++-devel-13.1.0-1.7 ######################################## [ 45s] build-compare-2015.04.28-1.3 ######################################## [ 52s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 55s] gcc-13.1.0-1.7 ######################################## [ 55s] glibc-devel-2.37-1.8 ######################################## [ 55s] zlib-devel-1.2.13-1.8 ######################################## [ 72s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 72s] rpm-build-4.14.1.1-1.8 ######################################## [ 72s] util-linux-su-2.37.4-3.2 ######################################## [ 73s] smack-1.3.1-1.7 ######################################## [ 73s] grep-2.5.2-1.1 ######################################## [ 73s] elfutils-0.189-1.8 ######################################## [ 73s] less-466-1.1 ######################################## [ 73s] procps-ng-3.3.17-1.1 ######################################## [ 73s] file-5.44-1.7 ######################################## [ 73s] glibc-locale-2.37-1.8 ######################################## [ 74s] tzdata-2023c-1.1 ######################################## [ 75s] cpp-13.1.0-1.7 ######################################## [ 76s] gcc-c++-13.1.0-1.7 ######################################## [ 76s] gawk-3.1.5-1.1 ######################################## [ 76s] cpio-2.8-1.1 ######################################## [ 76s] diffutils-3.8-1.1 ######################################## [ 76s] hostname-3.23-1.1 ######################################## [ 76s] libext2fs-1.46.0-1.7 ######################################## [ 77s] net-tools-2.0_20121208git-1.1 ######################################## [ 77s] update-alternatives-1.20.5-1.1 ######################################## [ 77s] which-2.17-1.1 ######################################## [ 77s] now finalizing build dir... [ 78s] ----------------------------------------------------------------- [ 78s] I have the following modifications for libpciaccess.spec: [ 78s] 6c6 [ 78s] < Release: 0 [ 78s] --- [ 78s] > Release: 1.1 [ 78s] 84a85 [ 78s] > %changelog [ 78s] build target is armv7l-tizen-linux [ 78s] ----------------------------------------------------------------- [ 78s] ----- building libpciaccess.spec (user abuild) [ 78s] ----------------------------------------------------------------- [ 78s] ----------------------------------------------------------------- [ 79s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-RISCV/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 79s] Building target platforms: armv7l-tizen-linux [ 79s] Building for target armv7l-tizen-linux [ 79s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.yO6E6z [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + rm -rf libpciaccess-0.13.2 [ 79s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 79s] + /bin/tar -xof - [ 79s] + STATUS=0 [ 79s] + '[' 0 -ne 0 ']' [ 79s] + cd libpciaccess-0.13.2 [ 79s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 79s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 79s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 79s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 79s] patching file src/Makefile.am [ 79s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 79s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 79s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 79s] patching file src/common_bridge.c [ 79s] patching file src/linux_sysfs.c [ 79s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 79s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 79s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 79s] patching file src/linux_sysfs.c [ 79s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 79s] + exit 0 [ 79s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iXu6C3 [ 79s] + umask 022 [ 79s] + cd /home/abuild/rpmbuild/BUILD [ 79s] + cd libpciaccess-0.13.2 [ 79s] ++ uname -m [ 79s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 79s] + LANG=C [ 79s] + export LANG [ 79s] + unset DISPLAY [ 79s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + LDFLAGS= [ 79s] + export LDFLAGS [ 79s] + NOCONFIGURE=1 [ 79s] + AR=gcc-ar [ 79s] + export AR [ 79s] + NM=/bin/nm [ 79s] + export NM [ 79s] + RANLIB=gcc-ranlib [ 79s] + export RANLIB [ 79s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 79s] + export CFLAGS [ 79s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 79s] + export CXXFLAGS [ 79s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 79s] + export FFLAGS [ 79s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 79s] autoreconf: export WARNINGS= [ 79s] autoreconf: Entering directory '.' [ 79s] autoreconf: configure.ac: not using Gettext [ 80s] autoreconf: running: aclocal -I m4 [ 84s] autoreconf: configure.ac: tracing [ 85s] autoreconf: running: libtoolize --copy [ 86s] libtoolize: putting auxiliary files in '.'. [ 86s] libtoolize: copying file './ltmain.sh' [ 86s] libtoolize: putting macros in 'm4'. [ 86s] libtoolize: copying file 'm4/libtool.m4' [ 86s] libtoolize: copying file 'm4/ltoptions.m4' [ 86s] libtoolize: copying file 'm4/ltsugar.m4' [ 86s] libtoolize: copying file 'm4/ltversion.m4' [ 86s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 86s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 86s] libtoolize: and rerunning libtoolize and aclocal. [ 86s] autoreconf: configure.ac: not using Intltool [ 86s] autoreconf: configure.ac: not using Gtkdoc [ 86s] autoreconf: running: aclocal -I m4 [ 89s] autoreconf: running: /usr/bin/autoconf [ 91s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 91s] configure.ac:36: You should run autoupdate. [ 91s] m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from... [ 91s] configure.ac:36: the top level [ 91s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 91s] configure.ac:42: You should run autoupdate. [ 91s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 91s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 91s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 91s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 91s] configure.ac:42: the top level [ 93s] autoreconf: running: /usr/bin/autoheader [ 94s] autoreconf: running: automake --add-missing --copy --no-force [ 96s] configure.ac:33: installing './compile' [ 96s] configure.ac:36: installing './config.guess' [ 96s] configure.ac:36: installing './config.sub' [ 96s] configure.ac:32: installing './install-sh' [ 96s] configure.ac:32: installing './missing' [ 97s] scanpci/Makefile.am: installing './depcomp' [ 98s] autoreconf: Leaving directory '.' [ 98s] checking for a BSD-compatible install... /bin/install -c [ 98s] checking whether build environment is sane... yes [ 98s] checking for a race-free mkdir -p... /bin/mkdir -p [ 98s] checking for gawk... gawk [ 98s] checking whether make sets $(MAKE)... yes [ 98s] checking whether make supports nested variables... yes [ 98s] checking whether make supports the include directive... yes (GNU style) [ 98s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 98s] checking whether the C compiler works... yes [ 98s] checking for C compiler default output file name... a.out [ 98s] checking for suffix of executables... [ 99s] checking whether we are cross compiling... no [ 99s] checking for suffix of object files... o [ 99s] checking whether the compiler supports GNU C... yes [ 99s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 99s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 99s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 99s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 99s] checking for stdio.h... yes [ 99s] checking for stdlib.h... yes [ 99s] checking for string.h... yes [ 99s] checking for inttypes.h... yes [ 99s] checking for stdint.h... yes [ 99s] checking for strings.h... yes [ 99s] checking for sys/stat.h... yes [ 99s] checking for sys/types.h... yes [ 99s] checking for unistd.h... yes [ 99s] checking for wchar.h... yes [ 100s] checking for minix/config.h... no [ 100s] checking whether it is safe to define __EXTENSIONS__... yes [ 100s] checking whether _XOPEN_SOURCE should be defined... no [ 100s] checking build system type... armv7l-tizen-linux-gnueabi [ 100s] checking host system type... armv7l-tizen-linux-gnueabi [ 100s] checking how to print strings... printf [ 100s] checking for a sed that does not truncate output... /bin/sed [ 100s] checking for grep that handles long lines and -e... /bin/grep [ 100s] checking for egrep... /bin/grep -E [ 100s] checking for fgrep... /bin/grep -F [ 100s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 100s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 100s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 100s] checking the name lister (/bin/nm) interface... BSD nm [ 100s] checking whether ln -s works... yes [ 100s] checking the maximum length of command line arguments... 1572864 [ 100s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 100s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 100s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 100s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 100s] checking for objdump... objdump [ 100s] checking how to recognize dependent libraries... pass_all [ 100s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 100s] checking for dlltool... no [ 100s] checking how to associate runtime and link libraries... printf %s\n [ 100s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 100s] checking for archiver @FILE support... @ [ 100s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 100s] checking for strip... strip [ 100s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 100s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 100s] checking for sysroot... no [ 100s] checking for a working dd... /bin/dd [ 100s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 100s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 100s] checking for mt... no [ 100s] checking if : is a manifest tool... no [ 100s] checking for dlfcn.h... yes [ 100s] checking for objdir... .libs [ 100s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 100s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 101s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 101s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 101s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 101s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 101s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 101s] checking whether -lc should be explicitly linked in... no [ 101s] checking dynamic linker characteristics... GNU/Linux ld.so [ 101s] checking how to hardcode library paths into programs... immediate [ 101s] checking whether stripping libraries is possible... yes [ 101s] checking if libtool supports shared libraries... yes [ 101s] checking whether to build shared libraries... yes [ 101s] checking whether to build static libraries... yes [ 101s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 101s] checking whether __clang__ is declared... no [ 101s] checking whether __INTEL_COMPILER is declared... no [ 102s] checking whether __SUNPRO_C is declared... no [ 102s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 102s] checking pkg-config is at least version 0.9.0... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 102s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 103s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 104s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 105s] checking whether make supports nested variables... (cached) yes [ 105s] checking for special C compiler options needed for large files... no [ 105s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 105s] checking for err.h... yes [ 105s] checking for asm/mtrr.h... no [ 105s] checking for struct pci_io.pi_sel.pc_domain... no [ 105s] checking that generated files are newer than configure... done [ 105s] configure: creating ./config.status [ 106s] config.status: creating Makefile [ 106s] config.status: creating include/Makefile [ 106s] config.status: creating man/Makefile [ 106s] config.status: creating src/Makefile [ 106s] config.status: creating scanpci/Makefile [ 106s] config.status: creating pciaccess.pc [ 106s] config.status: creating config.h [ 106s] config.status: executing depfiles commands [ 106s] config.status: executing libtool commands [ 106s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -w' [ 106s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -w' [ 106s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 106s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 106s] + AR=gcc-ar [ 106s] + export AR [ 106s] + NM=/bin/nm [ 106s] + export NM [ 106s] + RANLIB=gcc-ranlib [ 106s] + export RANLIB [ 106s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 106s] + export CFLAGS [ 106s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 106s] + export CXXFLAGS [ 106s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 106s] + export FFLAGS [ 106s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 107s] checking for a BSD-compatible install... /bin/install -c [ 107s] checking whether build environment is sane... yes [ 107s] checking for a race-free mkdir -p... /bin/mkdir -p [ 107s] checking for gawk... gawk [ 107s] checking whether make sets $(MAKE)... yes [ 107s] checking whether make supports nested variables... yes [ 107s] checking whether make supports the include directive... yes (GNU style) [ 107s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 107s] checking whether the C compiler works... yes [ 107s] checking for C compiler default output file name... a.out [ 107s] checking for suffix of executables... [ 107s] checking whether we are cross compiling... no [ 107s] checking for suffix of object files... o [ 107s] checking whether the compiler supports GNU C... yes [ 107s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 107s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 107s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 108s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 108s] checking for stdio.h... yes [ 108s] checking for stdlib.h... yes [ 108s] checking for string.h... yes [ 108s] checking for inttypes.h... yes [ 108s] checking for stdint.h... yes [ 108s] checking for strings.h... yes [ 108s] checking for sys/stat.h... yes [ 108s] checking for sys/types.h... yes [ 108s] checking for unistd.h... yes [ 108s] checking for wchar.h... yes [ 108s] checking for minix/config.h... no [ 108s] checking whether it is safe to define __EXTENSIONS__... yes [ 108s] checking whether _XOPEN_SOURCE should be defined... no [ 108s] checking build system type... armv7l-tizen-linux-gnueabi [ 108s] checking host system type... armv7l-tizen-linux-gnueabi [ 108s] checking how to print strings... printf [ 109s] checking for a sed that does not truncate output... /bin/sed [ 109s] checking for grep that handles long lines and -e... /bin/grep [ 109s] checking for egrep... /bin/grep -E [ 109s] checking for fgrep... /bin/grep -F [ 109s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 109s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 109s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 109s] checking the name lister (/bin/nm) interface... BSD nm [ 109s] checking whether ln -s works... yes [ 109s] checking the maximum length of command line arguments... 1572864 [ 109s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 109s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 109s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 109s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 109s] checking for objdump... objdump [ 109s] checking how to recognize dependent libraries... pass_all [ 109s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 109s] checking for dlltool... no [ 109s] checking how to associate runtime and link libraries... printf %s\n [ 109s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 109s] checking for archiver @FILE support... @ [ 109s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 109s] checking for strip... strip [ 109s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 109s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 109s] checking for sysroot... no [ 109s] checking for a working dd... /bin/dd [ 109s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 109s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 109s] checking for mt... no [ 109s] checking if : is a manifest tool... no [ 109s] checking for dlfcn.h... yes [ 109s] checking for objdir... .libs [ 109s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... yes [ 109s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 109s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 110s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 110s] checking whether -lc should be explicitly linked in... no [ 110s] checking dynamic linker characteristics... GNU/Linux ld.so [ 110s] checking how to hardcode library paths into programs... immediate [ 110s] checking whether stripping libraries is possible... yes [ 110s] checking if libtool supports shared libraries... yes [ 110s] checking whether to build shared libraries... yes [ 110s] checking whether to build static libraries... no [ 110s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 110s] checking whether __clang__ is declared... no [ 110s] checking whether __INTEL_COMPILER is declared... no [ 110s] checking whether __SUNPRO_C is declared... no [ 110s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 111s] checking pkg-config is at least version 0.9.0... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 114s] checking whether make supports nested variables... (cached) yes [ 114s] checking for gzopen in -lz... yes [ 114s] checking for zlib.h... yes [ 114s] checking for special C compiler options needed for large files... no [ 114s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 114s] checking for err.h... yes [ 114s] checking for asm/mtrr.h... no [ 114s] checking for struct pci_io.pi_sel.pc_domain... no [ 114s] checking that generated files are newer than configure... done [ 114s] configure: creating ./config.status [ 115s] config.status: creating Makefile [ 115s] config.status: creating include/Makefile [ 115s] config.status: creating man/Makefile [ 115s] config.status: creating src/Makefile [ 115s] config.status: creating scanpci/Makefile [ 116s] config.status: creating pciaccess.pc [ 116s] config.status: creating config.h [ 116s] config.status: executing depfiles commands [ 116s] config.status: executing libtool commands [ 116s] + make -j12 [ 116s] make all-recursive [ 116s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 116s] Making all in include [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 116s] make[2]: Nothing to be done for 'all'. [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 116s] Making all in man [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 116s] GEN scanpci.1 [ 116s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 116s] Making all in src [ 116s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 116s] CC common_bridge.lo [ 116s] CC common_iterator.lo [ 116s] CC common_init.lo [ 116s] CC common_interface.lo [ 116s] CC common_io.lo [ 116s] CC common_capability.lo [ 116s] CC common_device_name.lo [ 116s] CC common_map.lo [ 116s] CC common_vgaarb.lo [ 116s] CC linux_sysfs.lo [ 116s] CC linux_devmem.lo [ 117s] CCLD libpciaccess.la [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 117s] Making all in scanpci [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 117s] CC scanpci.o [ 117s] CCLD scanpci [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 117s] + exit 0 [ 117s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.SQJ1Yo [ 117s] + umask 022 [ 117s] + cd /home/abuild/rpmbuild/BUILD [ 117s] + cd libpciaccess-0.13.2 [ 117s] + LANG=C [ 117s] + export LANG [ 117s] + unset DISPLAY [ 117s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 117s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 117s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 117s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm install [ 117s] Making install in include [ 117s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 117s] make[2]: Nothing to be done for 'install-exec-am'. [ 117s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 117s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 117s] Making install in man [ 117s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 117s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 117s] make[2]: Nothing to be done for 'install-exec-am'. [ 117s] make[2]: Nothing to be done for 'install-data-am'. [ 117s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 117s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 117s] Making install in src [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 118s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 118s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 118s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 118s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 118s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.la [ 118s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 118s] Making install in scanpci [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 118s] make[2]: Nothing to be done for 'install-exec-am'. [ 118s] make[2]: Nothing to be done for 'install-data-am'. [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 118s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 118s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 118s] make[2]: Nothing to be done for 'install-exec-am'. [ 118s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 118s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 118s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 118s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 118s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info/dir [ 118s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.la$' [ 118s] + xargs rm -f -- [ 118s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.a$' [ 118s] + xargs rm -f -- [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/packages [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess-0.13.2 [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/gtk-doc [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc [ 118s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/man [ 118s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 118s] + xargs rm -f -- [ 118s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 118s] + xargs rm -f -- [ 118s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 118s] + xargs rm -f -- [ 118s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 118s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 118s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_line_str [ 118s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 118s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 118s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 118s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 118s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 118s] + /usr/lib/rpm/check-buildroot [ 118s] + /usr/lib/rpm//brp-compress [ 118s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 119s] + /usr/lib/rpm/brp-python-hardlink [ 119s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 119s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 119s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 119s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 119s] Processing files: libpciaccess-0.13.2-1.1.armv7l [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.24Ri4V [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd libpciaccess-0.13.2 [ 119s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 119s] + export LC_ALL=C [ 119s] + LC_ALL=C [ 119s] + export LICENSEDIR [ 119s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 119s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 119s] + exit 0 [ 119s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(armv7l-32) = 0.13.2-1.1 libpciaccess.so.0 [ 119s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 119s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 119s] Requires(post): /sbin/ldconfig [ 119s] Requires(postun): /sbin/ldconfig [ 119s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 119s] Processing files: libpciaccess-debugsource-0.13.2-1.1.armv7l [ 119s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Processing files: libpciaccess-devel-0.13.2-1.1.armv7l [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Kit20G [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd libpciaccess-0.13.2 [ 119s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 119s] + export LC_ALL=C [ 119s] + LC_ALL=C [ 119s] + export LICENSEDIR [ 119s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 119s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 119s] + exit 0 [ 119s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(armv7l-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 119s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 119s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 119s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.armv7l [ 119s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 119s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 119s] [ 119s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(armv7l-32) = 0.13.2-1.1 [ 119s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 119s] Recommends: libpciaccess-debugsource(armv7l-32) = 0.13.2-1.1 [ 119s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 119s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-1.1.armv7l.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 119s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 119s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.qlIY5a [ 119s] + umask 022 [ 119s] + cd /home/abuild/rpmbuild/BUILD [ 119s] + cd libpciaccess-0.13.2 [ 119s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 119s] + exit 0 [ 120s] ... checking for files with abuild user/group [ 120s] ... creating baselibs [ 120s] no targets for arch armv7l, nothing to do [ 120s] [ 120s] 0108a78018bc finished "build libpciaccess.spec" at Fri Jul 14 14:31:43 UTC 2023. [ 120s] Retried build at Fri Jul 14 16:23:17 2023 returned same result, skipped Retried build at Mon Jul 17 10:49:27 2023 returned same result, skipped