[ 0s] Memory limit set to 71863554KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] 6d72f3f56c3f started "build attr.spec" at Mon Jul 17 09:05:24 UTC 2023. [ 0s] [ 0s] Building attr for project 'Tizen-Base-RISCV' repository 'standard' arch 'i586' srcmd5 'd7386ab0edf969c6a28ac623f7d717b5' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/attr.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/attr.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/18/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/attr.spec build ... [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/36] preinstalling libmagic-data... [ 1s] [2/36] preinstalling libncurses... [ 1s] [3/36] preinstalling setup... [ 1s] [4/36] preinstalling filesystem... [ 1s] [5/36] preinstalling glibc... [ 2s] [6/36] preinstalling bash... [ 2s] [7/36] preinstalling diffutils... [ 2s] [8/36] preinstalling grep... [ 2s] [9/36] preinstalling libattr... [ 2s] [10/36] preinstalling libbz2... [ 2s] [11/36] preinstalling libcap... [ 2s] [12/36] preinstalling libfreebl3... [ 2s] [13/36] preinstalling libgcc... [ 2s] [14/36] preinstalling liblua... [ 2s] [15/36] preinstalling liblzma... [ 2s] [16/36] preinstalling libpopt... [ 2s] [17/36] preinstalling libreadline... [ 2s] [18/36] preinstalling libsmack... [ 2s] [19/36] preinstalling libsqlite... [ 2s] [20/36] preinstalling libzstd1... [ 2s] [21/36] preinstalling nspr... [ 2s] [22/36] preinstalling sed... [ 2s] [23/36] preinstalling zlib... [ 3s] [24/36] preinstalling coreutils... [ 3s] [25/36] preinstalling libacl... [ 3s] [26/36] preinstalling libelf... [ 3s] [27/36] preinstalling smack... [ 3s] [28/36] preinstalling bzip2... [ 3s] [29/36] preinstalling libmagic... [ 3s] [30/36] preinstalling libxml2... [ 3s] [31/36] preinstalling util-linux... [ 3s] [32/36] preinstalling tar... [ 3s] [33/36] preinstalling util-linux-su... [ 3s] [34/36] preinstalling nss... [ 3s] [35/36] preinstalling libsoftokn3... [ 3s] [36/36] preinstalling rpm... [ 4s] running setup postinstall script [ 4s] chroot: failed to run command '': No such file or directory [ 4s] initializing rpm db... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] querying package ids... [ 5s] [1/96] cumulate libmagic-data-5.44-1.7 [ 5s] [2/96] cumulate setup-0.9-1.1 [ 5s] [3/96] cumulate filesystem-3.1-1.1 [ 5s] [4/96] cumulate glibc-2.37-1.10 [ 5s] [5/96] cumulate bash-3.2.57-1.1 [ 5s] [6/96] cumulate cpio-2.8-1.1 [ 5s] [7/96] cumulate diffutils-3.8-1.1 [ 5s] [8/96] cumulate findutils-4.3.8-1.7 [ 5s] [9/96] cumulate gdbm-1.8.3-1.11 [ 5s] [10/96] cumulate hostname-3.23-1.1 [ 5s] [11/96] cumulate libatomic-13.1.0-2.1 [ 5s] [12/96] cumulate libattr-2.5.1-1.9 [ 5s] [13/96] cumulate libblkid-2.37.4-1.1 [ 5s] [14/96] cumulate libbz2-1.0.8-1.9 [ 5s] [15/96] cumulate libcap-2.24-1.7 [ 5s] [16/96] cumulate libext2fs-1.46.0-1.8 [ 5s] [17/96] cumulate libfreebl3-3.87-1.10 [ 5s] [18/96] cumulate libgcc-13.1.0-2.1 [ 5s] [19/96] cumulate libgomp-13.1.0-2.1 [ 5s] [20/96] cumulate libitm-13.1.0-2.1 [ 5s] [21/96] cumulate libltdl-2.4.6-1.11 [ 5s] [22/96] cumulate liblua-5.1.5-1.7 [ 5s] [23/96] cumulate liblzma-5.2.5-1.10 [ 5s] [24/96] cumulate libopenssl11-1.1.1t-1.11 [ 5s] [25/96] cumulate libpcre-8.45-1.4 [ 5s] [26/96] cumulate libpopt-1.16-1.7 [ 5s] [27/96] cumulate libquadmath-13.1.0-2.1 [ 5s] [28/96] cumulate libsmack-1.3.1-1.7 [ 5s] [29/96] cumulate libsmartcols-2.37.4-1.1 [ 5s] [30/96] cumulate libsqlite-3.39.0-1.9 [ 5s] [31/96] cumulate libuuid-2.37.4-1.1 [ 5s] [32/96] cumulate libzstd1-1.5.2-1.8 [ 5s] [33/96] cumulate m4-1.4.19-1.1 [ 5s] [34/96] cumulate net-tools-2.0_20121208git-1.1 [ 5s] [35/96] cumulate nspr-4.35-1.7 [ 5s] [36/96] cumulate patch-2.7.6-1.7 [ 5s] [37/96] cumulate pkg-config-0.29.2-1.9 [ 5s] [38/96] cumulate sed-4.1c-1.1 [ 5s] [39/96] cumulate update-alternatives-1.20.5-1.1 [ 5s] [40/96] cumulate which-2.17-1.1 [ 5s] [41/96] cumulate zlib-1.2.13-1.11 [ 5s] [42/96] cumulate build-compare-2015.04.28-1.4 [ 5s] [43/96] cumulate binutils-libs-2.40-1.10 [ 5s] [44/96] cumulate coreutils-6.9-14.4 [ 5s] [45/96] cumulate cpp-13.1.0-2.1 [ 5s] [46/96] cumulate gawk-3.1.5-1.1 [ 5s] [47/96] cumulate gcc-c++-13.1.0-2.1 [ 5s] [48/96] cumulate grep-2.5.2-1.1 [ 5s] [49/96] cumulate libacl-2.2.53-1.7 [ 5s] [50/96] cumulate libelf-0.189-1.10 [ 5s] [51/96] cumulate libgfortran-13.1.0-2.1 [ 5s] [52/96] cumulate libmount-2.37.4-1.1 [ 5s] [53/96] cumulate libstdc++-13.1.0-2.1 [ 5s] [54/96] cumulate make-4.3-1.8 [ 5s] [55/96] cumulate nss-certs-3.87-1.10 [ 5s] [56/96] cumulate smack-1.3.1-1.7 [ 5s] [57/96] cumulate bzip2-1.0.8-1.9 [ 5s] [58/96] cumulate libfdisk-2.37.4-1.1 [ 5s] [59/96] cumulate libmagic-5.44-1.7 [ 5s] [60/96] cumulate libxml2-2.10.2-1.10 [ 5s] [61/96] cumulate perl-5.34.0-1.9 [ 5s] [62/96] cumulate xz-5.2.5-1.10 [ 5s] [63/96] cumulate build-mkbaselibs-20120927-1.1 [ 5s] [64/96] cumulate libstdc++-devel-13.1.0-2.1 [ 5s] [65/96] cumulate file-5.44-1.7 [ 5s] [66/96] cumulate linux-glibc-devel-5.4-1.11 [ 5s] [67/96] cumulate tar-1.17-1.1 [ 5s] [68/96] cumulate terminfo-base-full-6.2-1.10 [ 5s] [69/96] cumulate autoconf-2.71-1.11 [ 5s] [70/96] cumulate glibc-locale-2.37-1.10 [ 5s] [71/96] cumulate gzip-1.3.12-1.7 [ 5s] [72/96] cumulate libcc1-13.1.0-2.1 [ 5s] [73/96] cumulate libubsan-13.1.0-2.1 [ 5s] [74/96] cumulate pam-1.1.6-1.1 [ 5s] [75/96] cumulate binutils-2.40-1.10 [ 5s] [76/96] cumulate tzdata-2023c-1.1 [ 5s] [77/96] cumulate libdw-0.189-1.10 [ 5s] [78/96] cumulate libarchive-3.6.2-1.11 [ 5s] [79/96] cumulate automake-1.16.5-1.11 [ 5s] [80/96] cumulate libasm-0.189-1.10 [ 5s] [81/96] cumulate libncurses6-6.2-1.10 [ 5s] [82/96] cumulate build-20120927-1.1 [ 5s] [83/96] cumulate gcc-13.1.0-2.1 [ 5s] [84/96] cumulate libncurses-6.2-1.10 [ 5s] [85/96] cumulate less-466-1.1 [ 5s] [86/96] cumulate libreadline-5.2-1.9 [ 5s] [87/96] cumulate procps-ng-3.3.17-1.1 [ 5s] [88/96] cumulate glibc-devel-2.37-1.10 [ 5s] [89/96] cumulate libtool-2.4.6-1.11 [ 5s] [90/96] cumulate elfutils-0.189-1.10 [ 5s] [91/96] cumulate util-linux-2.37.4-1.1 [ 5s] [92/96] cumulate util-linux-su-2.37.4-1.1 [ 5s] [93/96] cumulate nss-3.87-1.10 [ 5s] [94/96] cumulate libsoftokn3-3.87-1.10 [ 5s] [95/96] cumulate rpm-4.14.1.1-1.10 [ 5s] [96/96] cumulate rpm-build-4.14.1.1-1.10 [ 5s] now installing cumulated packages [ 6s] Preparing... ######################################## [ 6s] Updating / installing... [ 6s] setup-0.9-1.1 ######################################## [ 6s] filesystem-3.1-1.1 ######################################## [ 6s] libmagic-data-5.44-1.7 ######################################## [ 6s] glibc-2.37-1.10 ######################################## [ 7s] bash-3.2.57-1.1 ######################################## [ 7s] zlib-1.2.13-1.11 ######################################## [ 7s] libgcc-13.1.0-2.1 ######################################## [ 7s] libstdc++-13.1.0-2.1 ######################################## [ 8s] coreutils-6.9-14.4 ######################################## [ 8s] libbz2-1.0.8-1.9 ######################################## [ 8s] liblzma-5.2.5-1.10 ######################################## [ 8s] libelf-0.189-1.10 ######################################## [ 8s] libdw-0.189-1.10 ######################################## [ 9s] libmagic-5.44-1.7 ######################################## [ 9s] libblkid-2.37.4-1.1 ######################################## [ 9s] nspr-4.35-1.7 ######################################## [ 9s] pam-1.1.6-1.1 ######################################## [ 9s] libcap-2.24-1.7 ######################################## [ 10s] libfreebl3-3.87-1.10 ######################################## [ 10s] liblua-5.1.5-1.7 ######################################## [ 10s] libpopt-1.16-1.7 ######################################## [ 10s] libuuid-2.37.4-1.1 ######################################## [ 11s] libzstd1-1.5.2-1.8 ######################################## [ 11s] linux-glibc-devel-5.4-1.11 ######################################## [ 12s] terminfo-base-full-6.2-1.10 ######################################## [ 12s] libncurses6-6.2-1.10 ######################################## [ 12s] libreadline-5.2-1.9 ######################################## [ 12s] libfdisk-2.37.4-1.1 ######################################## [ 12s] nss-certs-3.87-1.10 ######################################## [ 13s] libmount-2.37.4-1.1 ######################################## [ 13s] libasm-0.189-1.10 ######################################## [ 13s] libxml2-2.10.2-1.10 ######################################## [ 13s] xz-5.2.5-1.10 ######################################## [ 13s] bzip2-1.0.8-1.9 ######################################## [ 13s] gzip-1.3.12-1.7 ######################################## [ 13s] libcc1-13.1.0-2.1 ######################################## [ 13s] libubsan-13.1.0-2.1 ######################################## [ 14s] libgfortran-13.1.0-2.1 ######################################## [ 14s] binutils-libs-2.40-1.10 ######################################## [ 15s] binutils-2.40-1.10 ######################################## [ 15s] make-4.3-1.8 ######################################## [ 15s] findutils-4.3.8-1.7 ######################################## [ 15s] gdbm-1.8.3-1.11 ######################################## [ 20s] perl-5.34.0-1.9 ######################################## [ 20s] build-mkbaselibs-20120927-1.1 ######################################## [ 20s] libatomic-13.1.0-2.1 ######################################## [ 21s] libattr-2.5.1-1.9 ######################################## [ 21s] libacl-2.2.53-1.7 ######################################## [ 21s] tar-1.17-1.1 ######################################## [ 21s] libgomp-13.1.0-2.1 ######################################## [ 21s] libitm-13.1.0-2.1 ######################################## [ 21s] libltdl-2.4.6-1.11 ######################################## [ 22s] libopenssl11-1.1.1t-1.11 ######################################## [ 22s] libarchive-3.6.2-1.11 ######################################## [ 22s] libpcre-8.45-1.4 ######################################## [ 22s] libquadmath-13.1.0-2.1 ######################################## [ 26s] gcc-13.1.0-2.1 ######################################## [ 26s] glibc-devel-2.37-1.10 ######################################## [ 26s] libsmack-1.3.1-1.7 ######################################## [ 26s] libsmartcols-2.37.4-1.1 ######################################## [ 26s] libsqlite-3.39.0-1.9 ######################################## [ 26s] libsoftokn3-3.87-1.10 ######################################## [ 27s] nss-3.87-1.10 ######################################## [ 27s] rpm-4.14.1.1-1.10 ######################################## [ 27s] m4-1.4.19-1.1 ######################################## [ 27s] autoconf-2.71-1.11 ######################################## [ 28s] automake-1.16.5-1.11 ######################################## [ 28s] patch-2.7.6-1.7 ######################################## [ 28s] sed-4.1c-1.1 ######################################## [ 28s] libtool-2.4.6-1.11 ######################################## [ 28s] build-20120927-1.1 ######################################## [ 28s] libncurses-6.2-1.10 ######################################## [ 28s] libstdc++-devel-13.1.0-2.1 ######################################## [ 28s] build-compare-2015.04.28-1.4 ######################################## [ 29s] util-linux-2.37.4-1.1 ######################################## [ 29s] util-linux-su-2.37.4-1.1 ######################################## [ 29s] rpm-build-4.14.1.1-1.10 ######################################## [ 29s] smack-1.3.1-1.7 ######################################## [ 29s] grep-2.5.2-1.1 ######################################## [ 29s] elfutils-0.189-1.10 ######################################## [ 29s] less-466-1.1 ######################################## [ 29s] procps-ng-3.3.17-1.1 ######################################## [ 29s] file-5.44-1.7 ######################################## [ 29s] glibc-locale-2.37-1.10 ######################################## [ 30s] tzdata-2023c-1.1 ######################################## [ 31s] cpp-13.1.0-2.1 ######################################## [ 34s] gcc-c++-13.1.0-2.1 ######################################## [ 34s] gawk-3.1.5-1.1 ######################################## [ 34s] cpio-2.8-1.1 ######################################## [ 34s] diffutils-3.8-1.1 ######################################## [ 34s] hostname-3.23-1.1 ######################################## [ 34s] libext2fs-1.46.0-1.8 ######################################## [ 34s] net-tools-2.0_20121208git-1.1 ######################################## [ 34s] pkg-config-0.29.2-1.9 ######################################## [ 34s] update-alternatives-1.20.5-1.1 ######################################## [ 34s] which-2.17-1.1 ######################################## [ 35s] now finalizing build dir... [ 36s] ----------------------------------------------------------------- [ 36s] I have the following modifications for attr.spec: [ 36s] 7c7 [ 36s] < Release: 0 [ 36s] --- [ 36s] > Release: 1.10 [ 36s] build target is i686-tizen-linux [ 36s] ----------------------------------------------------------------- [ 36s] ----- building attr.spec (user abuild) [ 36s] ----------------------------------------------------------------- [ 36s] ----------------------------------------------------------------- [ 36s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-RISCV/standard/d7386ab0edf969c6a28ac623f7d717b5-attr' /home/abuild/rpmbuild/SOURCES/attr.spec [ 36s] Building target platforms: i686-tizen-linux [ 36s] Building for target i686-tizen-linux [ 36s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Y2ozim [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + rm -rf attr-2.5.1 [ 36s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/attr-2.5.1.src.tar.gz [ 36s] + /bin/tar -xof - [ 36s] + STATUS=0 [ 36s] + '[' 0 -ne 0 ']' [ 36s] + cd attr-2.5.1 [ 36s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 36s] + cp /home/abuild/rpmbuild/SOURCES/attr.manifest . [ 36s] + exit 0 [ 36s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.T7PvAy [ 36s] + umask 022 [ 36s] + cd /home/abuild/rpmbuild/BUILD [ 36s] + cd attr-2.5.1 [ 36s] ++ uname -m [ 36s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 36s] + LANG=C [ 36s] + export LANG [ 36s] + unset DISPLAY [ 36s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 36s] + export CFLAGS [ 36s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 36s] + export CXXFLAGS [ 36s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 36s] + export FFLAGS [ 36s] + LDFLAGS= [ 36s] + export LDFLAGS [ 36s] + export 'OPTIMIZER=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 36s] + OPTIMIZER='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 36s] + export DEBUG=-DNDEBUG [ 36s] + DEBUG=-DNDEBUG [ 36s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -fPIC' [ 36s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -fPIC' [ 36s] + export 'LDFLAGS= -Wl,-z,relro -pie' [ 36s] + LDFLAGS=' -Wl,-z,relro -pie' [ 36s] + AR=gcc-ar [ 36s] + export AR [ 36s] + NM=/bin/nm [ 36s] + export NM [ 36s] + RANLIB=gcc-ranlib [ 36s] + export RANLIB [ 36s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -fPIC' [ 36s] + export CFLAGS [ 36s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 36s] + export CXXFLAGS [ 36s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 36s] + export FFLAGS [ 36s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-gettext=no --exec-prefix=/ --sbindir=/usr/sbin --libdir=/usr/lib --libexecdir=/usr/lib --with-pic --enable-static=no [ 37s] configure: WARNING: unrecognized options: --enable-gettext [ 37s] checking for a BSD-compatible install... /bin/install -c [ 37s] checking whether build environment is sane... yes [ 37s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 37s] checking for gawk... gawk [ 37s] checking whether make sets $(MAKE)... yes [ 37s] checking whether make supports nested variables... yes [ 37s] checking whether make supports nested variables... (cached) yes [ 37s] checking for i686-tizen-linux-gnu-gcc... no [ 37s] checking for gcc... gcc [ 37s] checking whether the C compiler works... yes [ 37s] checking for C compiler default output file name... a.out [ 37s] checking for suffix of executables... [ 37s] checking whether we are cross compiling... no [ 37s] checking for suffix of object files... o [ 37s] checking whether we are using the GNU C compiler... yes [ 37s] checking whether gcc accepts -g... yes [ 38s] checking for gcc option to accept ISO C89... none needed [ 38s] checking whether gcc understands -c and -o together... yes [ 38s] checking whether make supports the include directive... yes (GNU style) [ 38s] checking dependency style of gcc... gcc3 [ 38s] checking how to run the C preprocessor... gcc -E [ 38s] checking for grep that handles long lines and -e... /bin/grep [ 38s] checking for egrep... /bin/grep -E [ 38s] checking for ANSI C header files... yes [ 38s] checking for sys/types.h... yes [ 38s] checking for sys/stat.h... yes [ 38s] checking for stdlib.h... yes [ 39s] checking for string.h... yes [ 39s] checking for memory.h... yes [ 39s] checking for strings.h... yes [ 39s] checking for inttypes.h... yes [ 39s] checking for stdint.h... yes [ 39s] checking for unistd.h... yes [ 40s] checking minix/config.h usability... no [ 40s] checking minix/config.h presence... no [ 40s] checking for minix/config.h... no [ 40s] checking whether it is safe to define __EXTENSIONS__... yes [ 40s] checking for an ANSI C-conforming const... yes [ 40s] checking for mode_t... yes [ 40s] checking for size_t... yes [ 41s] checking for working alloca.h... yes [ 41s] checking for alloca... yes [ 41s] checking whether __attribute__((visibility())) is supported... yes [ 41s] checking for special C compiler options needed for large files... no [ 41s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 41s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 41s] checking the archiver (gcc-ar) interface... ar [ 41s] checking build system type... i686-tizen-linux-gnu [ 41s] checking host system type... i686-tizen-linux-gnu [ 41s] checking how to print strings... printf [ 41s] checking for a sed that does not truncate output... /bin/sed [ 41s] checking for fgrep... /bin/grep -F [ 41s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 41s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 41s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 41s] checking the name lister (/bin/nm) interface... BSD nm [ 41s] checking whether ln -s works... yes [ 41s] checking the maximum length of command line arguments... 1572864 [ 41s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 41s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 41s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 41s] checking for i686-tizen-linux-gnu-objdump... no [ 41s] checking for objdump... objdump [ 41s] checking how to recognize dependent libraries... pass_all [ 41s] checking for i686-tizen-linux-gnu-dlltool... no [ 41s] checking for dlltool... no [ 41s] checking how to associate runtime and link libraries... printf %s\n [ 41s] checking for i686-tizen-linux-gnu-ar... (cached) gcc-ar [ 42s] checking for archiver @FILE support... @ [ 42s] checking for i686-tizen-linux-gnu-strip... no [ 42s] checking for strip... strip [ 42s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 42s] checking command to parse /bin/nm output from gcc object... ok [ 42s] checking for sysroot... no [ 42s] checking for a working dd... /bin/dd [ 42s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 42s] checking for i686-tizen-linux-gnu-mt... no [ 42s] checking for mt... no [ 42s] checking if : is a manifest tool... no [ 42s] checking for dlfcn.h... yes [ 42s] checking for objdir... .libs [ 43s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 43s] checking for gcc option to produce PIC... -fPIC -DPIC [ 43s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 43s] checking if gcc static flag -static works... no [ 43s] checking if gcc supports -c -o file.o... yes [ 43s] checking if gcc supports -c -o file.o... (cached) yes [ 43s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 43s] checking whether -lc should be explicitly linked in... no [ 43s] checking dynamic linker characteristics... GNU/Linux ld.so [ 43s] checking how to hardcode library paths into programs... immediate [ 43s] checking whether stripping libraries is possible... yes [ 43s] checking if libtool supports shared libraries... yes [ 43s] checking whether to build shared libraries... yes [ 43s] checking whether to build static libraries... no [ 43s] checking whether NLS is requested... yes [ 43s] checking for msgfmt... no [ 43s] checking for gmsgfmt... : [ 43s] checking for xgettext... no [ 44s] checking for msgmerge... no [ 44s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 44s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 44s] checking for shared library run path origin... done [ 44s] checking for CFPreferencesCopyAppValue... no [ 44s] checking for CFLocaleCopyCurrent... no [ 44s] checking for GNU gettext in libc... yes [ 44s] checking whether to use NLS... yes [ 44s] checking where the gettext function comes from... libc [ 44s] checking that generated files are newer than configure... done [ 44s] configure: creating ./config.status [ 47s] config.status: creating libattr.pc [ 47s] config.status: creating Makefile [ 47s] config.status: creating po/Makefile.in [ 47s] config.status: creating include/config.h [ 47s] config.status: executing depfiles commands [ 47s] config.status: executing libtool commands [ 47s] config.status: executing po-directories commands [ 47s] config.status: creating po/POTFILES [ 47s] config.status: creating po/Makefile [ 47s] config.status: executing include/attr commands [ 47s] configure: WARNING: unrecognized options: --enable-gettext [ 47s] + /bin/make -j12 [ 47s] Making all in po [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 47s] make[1]: Nothing to be done for 'all'. [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 47s] CC tools/getfattr.o [ 47s] CC tools/setfattr.o [ 47s] CC tools/attr.o [ 47s] CC libattr/la-attr_copy_action.lo [ 47s] CC libattr/la-attr_copy_check.lo [ 47s] CC libattr/la-attr_copy_fd.lo [ 47s] CC libattr/la-attr_copy_file.lo [ 47s] CC libattr/la-libattr.lo [ 47s] CC libattr/la-syscalls.lo [ 47s] CC libmisc/high_water_alloc.lo [ 47s] CC libmisc/next_line.lo [ 47s] CC libmisc/quote.lo [ 47s] CC libmisc/unquote.lo [ 47s] CC libmisc/walk_tree.lo [ 47s] libattr/attr_copy_file.c: In function 'attr_copy_file': [ 47s] libattr/attr_copy_file.c:126:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 47s] 126 | size = lgetxattr (src_path, name, value, size); [ 47s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 47s] In file included from libattr/attr_copy_file.c:25: [ 47s] /usr/include/sys/xattr.h:67:16: note: in a call to function 'lgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 47s] 67 | extern ssize_t lgetxattr (const char *__path, const char *__name, [ 47s] | ^~~~~~~~~ [ 47s] libattr/attr_copy_file.c:126:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 47s] 126 | size = lgetxattr (src_path, name, value, size); [ 47s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 47s] /usr/include/sys/xattr.h:67:16: note: in a call to function 'lgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 47s] 67 | extern ssize_t lgetxattr (const char *__path, const char *__name, [ 47s] | ^~~~~~~~~ [ 48s] libattr/attr_copy_fd.c: In function 'attr_copy_fd': [ 48s] libattr/attr_copy_fd.c:128:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 48s] 128 | size = fgetxattr (src_fd, name, value, size); [ 48s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 48s] In file included from libattr/attr_copy_fd.c:25: [ 48s] /usr/include/sys/xattr.h:73:16: note: in a call to function 'fgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 48s] 73 | extern ssize_t fgetxattr (int __fd, const char *__name, void *__value, [ 48s] | ^~~~~~~~~ [ 48s] libattr/attr_copy_fd.c:128:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 48s] 128 | size = fgetxattr (src_fd, name, value, size); [ 48s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 48s] /usr/include/sys/xattr.h:73:16: note: in a call to function 'fgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 48s] 73 | extern ssize_t fgetxattr (int __fd, const char *__name, void *__value, [ 48s] | ^~~~~~~~~ [ 48s] CCLD libattr.la [ 48s] CCLD libmisc.la [ 48s] CCLD attr [ 48s] CCLD getfattr [ 48s] CCLD setfattr [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] + exit 0 [ 49s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.EiPIVR [ 49s] + umask 022 [ 49s] + cd /home/abuild/rpmbuild/BUILD [ 49s] + cd attr-2.5.1 [ 49s] + LANG=C [ 49s] + export LANG [ 49s] + unset DISPLAY [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 [ 49s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 [ 49s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 install [ 49s] Making install in po [ 49s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 49s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/cs/LC_MESSAGES/attr.mo [ 49s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/de/LC_MESSAGES/attr.mo [ 49s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/es/LC_MESSAGES/attr.mo [ 49s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/fr/LC_MESSAGES/attr.mo [ 49s] installing gl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/gl/LC_MESSAGES/attr.mo [ 49s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/nl/LC_MESSAGES/attr.mo [ 49s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/pl/LC_MESSAGES/attr.mo [ 49s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/sv/LC_MESSAGES/attr.mo [ 49s] installing en@boldquot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/en@boldquot/LC_MESSAGES/attr.mo [ 49s] installing en@quot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/locale/en@quot/LC_MESSAGES/attr.mo [ 49s] if test "attr" = "gettext-tools"; then \ [ 49s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/gettext/po; \ [ 49s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 49s] /bin/install -c -m 644 ./$file \ [ 49s] /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/gettext/po/$file; \ [ 49s] done; \ [ 49s] for file in Makevars; do \ [ 49s] rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/gettext/po/$file; \ [ 49s] done; \ [ 49s] else \ [ 49s] : ; \ [ 49s] fi [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 49s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib' [ 49s] /bin/sh ./libtool --mode=install /bin/install -c libattr.la '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib' [ 49s] libtool: install: /bin/install -c .libs/libattr.so.1.1.2501 /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501 [ 49s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so.1 || { rm -f libattr.so.1 && ln -s libattr.so.1.1.2501 libattr.so.1; }; }) [ 49s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so || { rm -f libattr.so && ln -s libattr.so.1.1.2501 libattr.so; }; }) [ 49s] libtool: install: /bin/install -c .libs/libattr.lai /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.la [ 49s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin' [ 49s] /bin/sh ./libtool --mode=install /bin/install -c attr getfattr setfattr '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin' [ 49s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 49s] libtool: install: /bin/install -c .libs/attr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr [ 49s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 49s] libtool: install: /bin/install -c .libs/getfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr [ 49s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 49s] libtool: install: /bin/install -c .libs/setfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/etc' [ 49s] /bin/install -c -m 644 xattr.conf '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/etc' [ 49s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/attributes.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/include/attr" [ 49s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/error_context.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/include/attr" [ 49s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/libattr.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/include/attr" [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc/attr' [ 49s] /bin/install -c -m 644 doc/CHANGES doc/COPYING doc/COPYING.LGPL doc/PORTING '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc/attr' [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man/man1' [ 49s] /bin/install -c -m 644 man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man/man1' [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man/man3' [ 49s] /bin/install -c -m 644 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man/man3' [ 49s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/pkgconfig' [ 49s] /bin/install -c -m 644 libattr.pc '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/pkgconfig' [ 49s] /bin/make install-data-hook [ 49s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] set -e; \ [ 49s] cd "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man"; \ [ 49s] for d in man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3; do \ [ 49s] man_section=${d##*.}; \ [ 49s] d=${d#man/}; \ [ 49s] dst=${d##*/}; \ [ 49s] for m in `gawk \ [ 49s] '/^\.S[h|H] NAME/ {ok=1; next} ok {print; exit}' $d \ [ 49s] | /bin/sed \ [ 49s] -e 's/^\.Nm //' -e 's/,/ /g' -e 's/\\-.*//' \ [ 49s] -e 's/\\\f[0-9]//g' -e 's/ / /g;q'`; \ [ 49s] do \ [ 49s] [ "$m" = "\\" ] && continue; \ [ 49s] ln="man$man_section/$m.$man_section"; \ [ 49s] [ -e "$ln" ] && continue; \ [ 49s] echo ln -s $dst $ln; \ [ 49s] ln -s $dst $ln; \ [ 49s] done; \ [ 49s] done [ 49s] ln -s attr_get.3 man3/attr_getf.3 [ 49s] ln -s attr_list.3 man3/attr_listf.3 [ 49s] ln -s attr_multi.3 man3/attr_multif.3 [ 49s] ln -s attr_remove.3 man3/attr_removef.3 [ 49s] ln -s attr_set.3 man3/attr_setf.3 [ 49s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 49s] + rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/info/dir [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -regex '.*\.la$' [ 49s] + xargs rm -f -- [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -regex '.*\.a$' [ 49s] + xargs rm -f -- [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -type f -name '*.la' -delete -print [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386//usr/share/doc/attr [ 49s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 attr [ 49s] find: `/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/help/': No such file or directory [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/info [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc/packages [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc/attr [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc/attr-2.5.1 [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/gtk-doc [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/doc [ 49s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/man [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -regex '.*/man/man./.*.[0-9]' [ 49s] + xargs rm -f -- [ 49s] + xargs rm -f -- [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -regex '.*/man/../man./.*.[0-9]' [ 49s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 -regex '.*/man/man./.*.[0-9]pm' [ 49s] + xargs rm -f -- [ 49s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.5.1-1.10 --unique-debug-src-base attr-2.5.1-1.10.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/attr-2.5.1 [ 50s] 1+0 records in [ 50s] 1+0 records out [ 50s] 7 bytes (7 B) copied, 1.4111e-05 s, 496 kB/s [ 50s] 1+0 records in [ 50s] 1+0 records out [ 50s] 7 bytes (7 B) copied, 4.4338e-05 s, 158 kB/s [ 50s] 1+0 records in [ 50s] 1+0 records out [ 50s] 7 bytes (7 B) copied, 4.3858e-05 s, 160 kB/s [ 50s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr [ 50s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr [ 50s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr [ 50s] /usr/lib/rpm/debugedit: 1+0 records in [ 50s] 1+0 records out [ 50s] 7 bytes (7 B) copied, 0.00158661 s, 4.4 kB/s [ 50s] /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr: Unknown debugging section .debug_line_str [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr: Unknown debugging section .debug_loclists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr: Unknown debugging section .debug_rnglists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/getfattr: DWARF version 5 unhandled [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr: Unknown debugging section .debug_line_str [ 50s] 0+0 records in [ 50s] 0+0 records out [ 50s] 0 bytes (0 B) copied, 2.7319e-05 s, 0.0 kB/s [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr: Unknown debugging section .debug_loclists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr: Unknown debugging section .debug_rnglists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/setfattr: DWARF version 5 unhandled [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr: Unknown debugging section .debug_line_str [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr: Unknown debugging section .debug_loclists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr: Unknown debugging section .debug_rnglists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/bin/attr: DWARF version 5 unhandled [ 50s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501 [ 50s] 0+0 records in [ 50s] 0+0 records out [ 50s] 0 bytes (0 B) copied, 2.6022e-05 s, 0.0 kB/s [ 50s] 0+0 records in [ 50s] 0+0 records out [ 50s] 0 bytes (0 B) copied, 1.3661e-05 s, 0.0 kB/s [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501: Unknown debugging section .debug_line_str [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501: Unknown debugging section .debug_loclists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501: Unknown debugging section .debug_rnglists [ 50s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/lib/libattr.so.1.1.2501: DWARF version 5 unhandled [ 50s] 0+0 records in [ 50s] 0+0 records out [ 50s] 0 bytes (0 B) copied, 3.6529e-05 s, 0.0 kB/s [ 50s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debuginfo.manifest [ 50s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debugsource.manifest [ 50s] + /usr/lib/rpm/check-buildroot [ 50s] + /usr/lib/rpm//brp-compress [ 50s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 50s] + /usr/lib/rpm/brp-python-hardlink [ 50s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 [ 50s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/attr-2.5.1/isu.list [ 50s] ~/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 ~/rpmbuild/BUILD/attr-2.5.1 [ 50s] ~/rpmbuild/BUILD/attr-2.5.1 [ 50s] Processing files: attr-2.5.1-1.10.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Ifiox2 [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd attr-2.5.1 [ 50s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/attr [ 50s] + export LC_ALL=C [ 50s] + LC_ALL=C [ 50s] + export LICENSEDIR [ 50s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/attr [ 50s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/attr [ 50s] + exit 0 [ 50s] Provides: attr = 2.5.1-1.10 attr(x86-32) = 2.5.1-1.10 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Requires: libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.2) libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.4) [ 50s] Processing files: attr-debugsource-2.5.1-1.10.i686 [ 50s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/attr-2.5.1/debugsourcefiles.list [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Processing files: libattr-2.5.1-1.10.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.ia2YIQ [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd attr-2.5.1 [ 50s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr [ 50s] + export LC_ALL=C [ 50s] + LC_ALL=C [ 50s] + export LICENSEDIR [ 50s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr [ 50s] + cp -pr doc/COPYING.LGPL /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr [ 50s] + exit 0 [ 50s] Provides: config(libattr) = 2.5.1-1.10 libattr = 2.5.1-1.10 libattr(x86-32) = 2.5.1-1.10 libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.1) libattr.so.1(ATTR_1.2) libattr.so.1(ATTR_1.3) [ 50s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Requires(post): /sbin/ldconfig [ 50s] Requires(postun): /sbin/ldconfig [ 50s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.4) [ 50s] Processing files: libattr-devel-2.5.1-1.10.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.PjxmrB [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd attr-2.5.1 [ 50s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr-devel [ 50s] + export LC_ALL=C [ 50s] + LC_ALL=C [ 50s] + export LICENSEDIR [ 50s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr-devel [ 50s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386/usr/share/licenses/libattr-devel [ 50s] + exit 0 [ 50s] Provides: attr-devel = 2.5.1 libattr-devel = 2.5.1-1.10 libattr-devel(x86-32) = 2.5.1-1.10 pkgconfig(libattr) = 2.5.1 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Requires: /usr/bin/pkg-config libattr.so.1 [ 50s] Obsoletes: attr-devel <= 2.5.1 [ 50s] Processing files: attr-debuginfo-2.5.1-1.10.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Provides: attr-debuginfo = 2.5.1-1.10 attr-debuginfo(x86-32) = 2.5.1-1.10 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Recommends: attr-debugsource(x86-32) = 2.5.1-1.10 [ 50s] Processing files: libattr-debuginfo-2.5.1-1.10.i686 [ 50s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 50s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 50s] [ 50s] Provides: libattr-debuginfo = 2.5.1-1.10 libattr-debuginfo(x86-32) = 2.5.1-1.10 [ 50s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 50s] Recommends: attr-debugsource(x86-32) = 2.5.1-1.10 [ 50s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 [ 50s] Wrote: /home/abuild/rpmbuild/SRPMS/attr-2.5.1-1.10.src.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/attr-2.5.1-1.10.i686.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/attr-debugsource-2.5.1-1.10.i686.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libattr-2.5.1-1.10.i686.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libattr-devel-2.5.1-1.10.i686.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/attr-debuginfo-2.5.1-1.10.i686.rpm [ 50s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libattr-debuginfo-2.5.1-1.10.i686.rpm [ 50s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.0BvSrd [ 50s] + umask 022 [ 50s] + cd /home/abuild/rpmbuild/BUILD [ 50s] + cd attr-2.5.1 [ 50s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.10.i386 [ 50s] + exit 0 [ 51s] ... checking for files with abuild user/group [ 51s] ... creating baselibs [ 51s] libattr(x86_64:32bit): writing specfile... [ 51s] libattr(x86_64:32bit): running build... [ 51s] libattr-devel(x86_64:32bit): writing specfile... [ 51s] libattr-devel(x86_64:32bit): running build... [ 51s] libattr-debuginfo(x86_64:32bit): writing specfile... [ 51s] libattr-debuginfo(x86_64:32bit): running build... [ 51s] [ 51s] 6d72f3f56c3f finished "build attr.spec" at Mon Jul 17 09:06:15 UTC 2023. [ 51s]