[ 0s] Memory limit set to 71863554KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 0s] 6d72f3f56c3f started "build libxml2.spec" at Mon Jul 17 08:47:15 UTC 2023. [ 0s] [ 0s] Building libxml2 for project 'Tizen-Base-RISCV' repository 'standard' arch 'riscv64' srcmd5 'a8eb79613ac5fcb869c656c19c57265d' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/libxml2.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/libxml2.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/28/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.28/.build-srcdir/libxml2.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling bash... [ 1s] [7/41] preinstalling diffutils... [ 2s] [8/41] preinstalling grep... [ 2s] [9/41] preinstalling libattr... [ 2s] [10/41] preinstalling libblkid... [ 2s] [11/41] preinstalling libbz2... [ 2s] [12/41] preinstalling libcap... [ 2s] [13/41] preinstalling libfreebl3... [ 2s] [14/41] preinstalling libgcc... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-riscv64... [ 8s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 10s] [28/41] preinstalling coreutils... [ 10s] [29/41] preinstalling libacl... [ 10s] [30/41] preinstalling libelf... [ 10s] [31/41] preinstalling libmount... [ 10s] [32/41] preinstalling smack... [ 10s] [33/41] preinstalling bzip2... [ 10s] [34/41] preinstalling libmagic... [ 10s] [35/41] preinstalling libxml2... [ 10s] [36/41] preinstalling tar... [ 10s] [37/41] preinstalling util-linux... [ 10s] [38/41] preinstalling util-linux-su... [ 10s] [39/41] preinstalling nss... [ 11s] [40/41] preinstalling libsoftokn3... [ 11s] [41/41] preinstalling rpm... [ 11s] running qemu-linux-user-x86_64-cross postinstall script [ 11s] running qemu-accel-x86_64-riscv64 postinstall script [ 11s] running setup postinstall script [ 11s] chroot: failed to run command '': No such file or directory [ 11s] initializing rpm db... [ 11s] reordering...cycle: libsoftokn3 -> nss [ 11s] breaking dependency nss -> libsoftokn3 [ 11s] done [ 11s] querying package ids... [ 11s] [1/102] cumulate libmagic-data-5.44-1.8 [ 11s] [2/102] cumulate setup-0.9-1.1 [ 11s] [3/102] cumulate filesystem-3.1-1.1 [ 11s] [4/102] cumulate glibc-2.37-1.10 [ 11s] [5/102] cumulate bash-3.2.57-1.1 [ 11s] [6/102] cumulate cpio-2.8-1.1 [ 11s] [7/102] cumulate diffutils-3.8-1.1 [ 11s] [8/102] cumulate findutils-4.3.8-1.8 [ 11s] [9/102] cumulate gdbm-1.8.3-1.10 [ 11s] [10/102] cumulate hostname-3.23-1.1 [ 11s] [11/102] cumulate libatomic-13.1.0-2.1 [ 11s] [12/102] cumulate libattr-2.5.1-1.8 [ 11s] [13/102] cumulate libblkid-2.37.4-1.1 [ 11s] [14/102] cumulate libbz2-1.0.8-1.8 [ 11s] [15/102] cumulate libcap-2.24-1.8 [ 11s] [16/102] cumulate libext2fs-1.46.0-1.8 [ 11s] [17/102] cumulate libfreebl3-3.87-1.9 [ 11s] [18/102] cumulate libgcc-13.1.0-2.1 [ 11s] [19/102] cumulate libgomp-13.1.0-2.1 [ 11s] [20/102] cumulate libitm-13.1.0-2.1 [ 11s] [21/102] cumulate libltdl-2.4.6-1.9 [ 11s] [22/102] cumulate liblua-5.1.5-1.8 [ 11s] [23/102] cumulate liblzma-5.2.5-1.10 [ 11s] [24/102] cumulate libopenssl11-1.1.1t-1.10 [ 11s] [25/102] cumulate libpcre-8.45-1.2 [ 11s] [26/102] cumulate libpopt-1.16-1.7 [ 11s] [27/102] cumulate libsmack-1.3.1-1.7 [ 11s] [28/102] cumulate libsmartcols-2.37.4-1.1 [ 11s] [29/102] cumulate libsqlite-3.39.0-1.8 [ 11s] [30/102] cumulate libuuid-2.37.4-1.1 [ 11s] [31/102] cumulate libzstd1-1.5.2-1.8 [ 11s] [32/102] cumulate m4-1.4.19-1.1 [ 11s] [33/102] cumulate net-tools-2.0_20121208git-1.1 [ 11s] [34/102] cumulate nspr-4.35-1.8 [ 11s] [35/102] cumulate patch-2.7.6-1.7 [ 11s] [36/102] cumulate pkg-config-0.29.2-1.8 [ 11s] [37/102] cumulate sed-4.1c-1.1 [ 11s] [38/102] cumulate update-alternatives-1.20.5-1.1 [ 11s] [39/102] cumulate which-2.17-1.1 [ 11s] [40/102] cumulate zlib-1.2.13-1.10 [ 11s] [41/102] cumulate build-compare-2015.04.28-1.4 [ 11s] [42/102] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.1 [ 11s] [43/102] cumulate binutils-libs-2.40-1.9 [ 11s] [44/102] cumulate coreutils-6.9-14.4 [ 11s] [45/102] cumulate cpp-13.1.0-2.1 [ 11s] [46/102] cumulate gawk-3.1.5-1.1 [ 11s] [47/102] cumulate gcc-c++-13.1.0-2.1 [ 11s] [48/102] cumulate grep-2.5.2-1.1 [ 11s] [49/102] cumulate libacl-2.2.53-1.8 [ 11s] [50/102] cumulate libelf-0.189-1.10 [ 11s] [51/102] cumulate libgfortran-13.1.0-2.1 [ 11s] [52/102] cumulate libmount-2.37.4-1.1 [ 11s] [53/102] cumulate libstdc++-13.1.0-2.1 [ 11s] [54/102] cumulate make-4.3-1.8 [ 11s] [55/102] cumulate nss-certs-3.87-1.9 [ 11s] [56/102] cumulate smack-1.3.1-1.7 [ 11s] [57/102] cumulate xz-devel-5.2.5-1.10 [ 11s] [58/102] cumulate bzip2-1.0.8-1.8 [ 11s] [59/102] cumulate libfdisk-2.37.4-1.1 [ 11s] [60/102] cumulate libmagic-5.44-1.8 [ 11s] [61/102] cumulate libxml2-2.10.2-1.8 [ 11s] [62/102] cumulate perl-5.34.0-1.8 [ 11s] [63/102] cumulate xz-5.2.5-1.10 [ 11s] [64/102] cumulate build-mkbaselibs-20120927-1.1 [ 11s] [65/102] cumulate libstdc++-devel-13.1.0-2.1 [ 11s] [66/102] cumulate binutils-2.40-1.9 [ 11s] [67/102] cumulate file-5.44-1.8 [ 11s] [68/102] cumulate linux-glibc-devel-5.4-1.10 [ 11s] [69/102] cumulate tar-1.17-1.1 [ 11s] [70/102] cumulate terminfo-base-full-6.2-1.10 [ 11s] [71/102] cumulate autoconf-2.71-1.10 [ 11s] [72/102] cumulate glibc-locale-2.37-1.10 [ 11s] [73/102] cumulate gzip-1.3.12-1.8 [ 11s] [74/102] cumulate libcc1-13.1.0-2.1 [ 11s] [75/102] cumulate libubsan-13.1.0-2.1 [ 11s] [76/102] cumulate pam-1.1.6-1.1 [ 11s] [77/102] cumulate tzdata-2023c-1.1 [ 11s] [78/102] cumulate libdw-0.189-1.10 [ 11s] [79/102] cumulate libarchive-3.6.2-1.10 [ 11s] [80/102] cumulate automake-1.16.5-1.9 [ 11s] [81/102] cumulate libasm-0.189-1.10 [ 11s] [82/102] cumulate libncurses5-6.2-1.10 [ 11s] [83/102] cumulate libncurses6-6.2-1.10 [ 11s] [84/102] cumulate build-20120927-1.1 [ 11s] [85/102] cumulate gcc-13.1.0-2.1 [ 11s] [86/102] cumulate libncurses-6.2-1.10 [ 11s] [87/102] cumulate less-466-1.1 [ 11s] [88/102] cumulate libreadline-5.2-1.8 [ 11s] [89/102] cumulate procps-ng-3.3.17-1.1 [ 11s] [90/102] cumulate qemu-accel-x86_64-riscv64-0.4-1.2 [ 11s] [91/102] cumulate glibc-devel-2.37-1.10 [ 11s] [92/102] cumulate libtool-2.4.6-1.9 [ 11s] [93/102] cumulate ncurses-devel-6.2-1.10 [ 11s] [94/102] cumulate elfutils-0.189-1.10 [ 11s] [95/102] cumulate readline-devel-5.2-1.8 [ 11s] [96/102] cumulate zlib-devel-1.2.13-1.10 [ 11s] [97/102] cumulate util-linux-2.37.4-1.1 [ 11s] [98/102] cumulate util-linux-su-2.37.4-1.1 [ 11s] [99/102] cumulate nss-3.87-1.9 [ 11s] [100/102] cumulate libsoftokn3-3.87-1.9 [ 11s] [101/102] cumulate rpm-4.14.1.1-1.10 [ 11s] [102/102] cumulate rpm-build-4.14.1.1-1.10 [ 11s] now installing cumulated packages [ 12s] Preparing... ######################################## [ 12s] Updating / installing... [ 12s] setup-0.9-1.1 ######################################## [ 12s] filesystem-3.1-1.1 ######################################## [ 12s] glibc-2.37-1.10 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 12s] ######################################## [ 12s] bash-3.2.57-1.1 ######################################## [ 12s] zlib-1.2.13-1.10 ######################################## [ 12s] libgcc-13.1.0-2.1 ######################################## [ 12s] libstdc++-13.1.0-2.1 ######################################## [ 13s] liblzma-5.2.5-1.10 ######################################## [ 13s] coreutils-6.9-14.4 ######################################## [ 13s] libbz2-1.0.8-1.8 ######################################## [ 13s] libelf-0.189-1.10 ######################################## [ 13s] libdw-0.189-1.10 ######################################## [ 13s] libblkid-2.37.4-1.1 ######################################## [ 13s] nspr-4.35-1.8 ######################################## [ 13s] pkg-config-0.29.2-1.8 ######################################## [ 13s] terminfo-base-full-6.2-1.10 ######################################## [ 13s] libncurses6-6.2-1.10 ######################################## [ 14s] libreadline-5.2-1.8 ######################################## [ 14s] pam-1.1.6-1.1 ######################################## [ 14s] libcap-2.24-1.8 ######################################## [ 14s] libfreebl3-3.87-1.9 ######################################## [ 14s] liblua-5.1.5-1.8 ######################################## [ 14s] libpopt-1.16-1.7 ######################################## [ 15s] libuuid-2.37.4-1.1 ######################################## [ 15s] libzstd1-1.5.2-1.8 ######################################## [ 15s] libfdisk-2.37.4-1.1 ######################################## [ 15s] libncurses5-6.2-1.10 ######################################## [ 15s] ncurses-devel-6.2-1.10 ######################################## [ 15s] nss-certs-3.87-1.9 ######################################## [ 15s] libmount-2.37.4-1.1 ######################################## [ 16s] libasm-0.189-1.10 ######################################## [ 16s] bzip2-1.0.8-1.8 ######################################## [ 16s] linux-glibc-devel-5.4-1.10 ######################################## [ 16s] gzip-1.3.12-1.8 ######################################## [ 16s] libxml2-2.10.2-1.8 ######################################## [ 16s] xz-5.2.5-1.10 ######################################## [ 16s] libcc1-13.1.0-2.1 ######################################## [ 16s] libubsan-13.1.0-2.1 ######################################## [ 16s] libgfortran-13.1.0-2.1 ######################################## [ 17s] binutils-libs-2.40-1.9 ######################################## [ 17s] binutils-2.40-1.9 ######################################## [ 17s] make-4.3-1.8 ######################################## [ 17s] findutils-4.3.8-1.8 ######################################## [ 17s] gdbm-1.8.3-1.10 ######################################## [ 19s] perl-5.34.0-1.8 ######################################## [ 19s] build-mkbaselibs-20120927-1.1 ######################################## [ 19s] libatomic-13.1.0-2.1 ######################################## [ 19s] libattr-2.5.1-1.8 ######################################## [ 19s] libacl-2.2.53-1.8 ######################################## [ 19s] tar-1.17-1.1 ######################################## [ 19s] libgomp-13.1.0-2.1 ######################################## [ 19s] libitm-13.1.0-2.1 ######################################## [ 21s] gcc-13.1.0-2.1 ######################################## [ 21s] glibc-devel-2.37-1.10 ######################################## [ 21s] libltdl-2.4.6-1.9 ######################################## [ 22s] libopenssl11-1.1.1t-1.10 ######################################## [ 22s] libarchive-3.6.2-1.10 ######################################## [ 22s] libpcre-8.45-1.2 ######################################## [ 22s] libsmack-1.3.1-1.7 ######################################## [ 22s] libsmartcols-2.37.4-1.1 ######################################## [ 23s] libsqlite-3.39.0-1.8 ######################################## [ 23s] libsoftokn3-3.87-1.9 ######################################## [ 23s] nss-3.87-1.9 ######################################## [ 23s] m4-1.4.19-1.1 ######################################## [ 23s] autoconf-2.71-1.10 ######################################## [ 24s] automake-1.16.5-1.9 ######################################## [ 24s] patch-2.7.6-1.7 ######################################## [ 24s] sed-4.1c-1.1 ######################################## [ 25s] util-linux-2.37.4-1.1 ######################################## [ 25s] libmagic-data-5.44-1.8 ######################################## [ 25s] libmagic-5.44-1.8 ######################################## [ 26s] rpm-4.14.1.1-1.10 ######################################## [ 26s] rpm-build-4.14.1.1-1.10 ######################################## [ 26s] file-5.44-1.8 ######################################## [ 26s] util-linux-su-2.37.4-1.1 ######################################## [ 26s] libtool-2.4.6-1.9 ######################################## [ 26s] smack-1.3.1-1.7 ######################################## [ 26s] grep-2.5.2-1.1 ######################################## [ 26s] zlib-devel-1.2.13-1.10 ######################################## [ 35s] qemu-accel-x86_64-riscv64-0.4-1.2 ######################################## [ 36s] build-20120927-1.1 ######################################## [ 36s] elfutils-0.189-1.10 ######################################## [ 36s] readline-devel-5.2-1.8 ######################################## [ 36s] libncurses-6.2-1.10 ######################################## [ 36s] less-466-1.1 ######################################## [ 36s] procps-ng-3.3.17-1.1 ######################################## [ 36s] xz-devel-5.2.5-1.10 ######################################## [ 37s] glibc-locale-2.37-1.10 ######################################## [ 37s] tzdata-2023c-1.1 ######################################## [ 39s] libstdc++-devel-13.1.0-2.1 ######################################## [ 40s] cpp-13.1.0-2.1 ######################################## [ 42s] gcc-c++-13.1.0-2.1 ######################################## [ 42s] build-compare-2015.04.28-1.4 ######################################## [ 46s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 47s] gawk-3.1.5-1.1 ######################################## [ 47s] cpio-2.8-1.1 ######################################## [ 47s] diffutils-3.8-1.1 ######################################## [ 47s] hostname-3.23-1.1 ######################################## [ 47s] libext2fs-1.46.0-1.8 ######################################## [ 47s] net-tools-2.0_20121208git-1.1 ######################################## [ 47s] update-alternatives-1.20.5-1.1 ######################################## [ 47s] which-2.17-1.1 ######################################## [ 49s] now finalizing build dir... [ 52s] ----------------------------------------------------------------- [ 52s] I have the following modifications for libxml2.spec: [ 52s] 4c4 [ 52s] < Release: 0 [ 52s] --- [ 52s] > Release: 1.9 [ 52s] build target is riscv64-tizen-linux [ 52s] ----------------------------------------------------------------- [ 52s] ----- building libxml2.spec (user abuild) [ 52s] ----------------------------------------------------------------- [ 52s] ----------------------------------------------------------------- [ 53s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-RISCV/standard/a8eb79613ac5fcb869c656c19c57265d-libxml2' /home/abuild/rpmbuild/SOURCES/libxml2.spec [ 53s] Building target platforms: riscv64-tizen-linux [ 53s] Building for target riscv64-tizen-linux [ 53s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tjY98D [ 53s] + umask 022 [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + cd /home/abuild/rpmbuild/BUILD [ 53s] + rm -rf libxml2-2.10.2 [ 53s] + /bin/tar -xof - [ 53s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libxml2-2.10.2.tar.gz [ 53s] + STATUS=0 [ 53s] + '[' 0 -ne 0 ']' [ 53s] + cd libxml2-2.10.2 [ 53s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 54s] + cp /home/abuild/rpmbuild/SOURCES/libxml2.manifest . [ 54s] + /bin/patch -p1 [ 54s] patching file Makefile.am [ 54s] + exit 0 [ 54s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.0sNFrl [ 54s] + umask 022 [ 54s] + cd /home/abuild/rpmbuild/BUILD [ 54s] + cd libxml2-2.10.2 [ 54s] ++ uname -m [ 54s] + [[ riscv64 == \a\a\r\c\h\6\4 ]] [ 54s] + LANG=C [ 54s] + export LANG [ 54s] + unset DISPLAY [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + LDFLAGS= [ 54s] + export LDFLAGS [ 54s] + export 'CFLAGS+= -fPIC' [ 54s] + CFLAGS+=' -fPIC' [ 54s] + chmod +x autogen.sh [ 54s] + AR=gcc-ar [ 54s] + export AR [ 54s] + NM=/bin/nm [ 54s] + export NM [ 54s] + RANLIB=gcc-ranlib [ 54s] + export RANLIB [ 54s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fPIC' [ 54s] + export CFLAGS [ 54s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 54s] + export CXXFLAGS [ 54s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 54s] + export FFLAGS [ 54s] + ./autogen.sh --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info [ 67s] libtoolize: putting auxiliary files in '.'. [ 67s] libtoolize: copying file './ltmain.sh' [ 67s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 67s] libtoolize: copying file 'm4/libtool.m4' [ 67s] libtoolize: copying file 'm4/ltoptions.m4' [ 67s] libtoolize: copying file 'm4/ltsugar.m4' [ 67s] libtoolize: copying file 'm4/ltversion.m4' [ 67s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 76s] configure.ac:47: installing './compile' [ 76s] configure.ac:12: installing './config.guess' [ 76s] configure.ac:12: installing './config.sub' [ 76s] configure.ac:42: installing './install-sh' [ 76s] configure.ac:42: installing './missing' [ 77s] Makefile.am: installing './depcomp' [ 78s] python/Makefile.am:28: installing './py-compile' [ 79s] checking build system type... riscv64-tizen-linux-gnu [ 79s] checking host system type... riscv64-tizen-linux-gnu [ 79s] checking for a BSD-compatible install... /bin/install -c [ 79s] checking whether build environment is sane... yes [ 79s] checking for a race-free mkdir -p... /bin/mkdir -p [ 79s] checking for gawk... gawk [ 79s] checking whether make sets $(MAKE)... yes [ 79s] checking whether make supports nested variables... yes [ 79s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 79s] checking whether make supports nested variables... (cached) yes [ 79s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 79s] checking whether the C compiler works... yes [ 79s] checking for C compiler default output file name... a.out [ 79s] checking for suffix of executables... [ 79s] checking whether we are cross compiling... no [ 79s] checking for suffix of object files... o [ 79s] checking whether the compiler supports GNU C... yes [ 79s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 79s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 79s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 79s] checking whether make supports the include directive... yes (GNU style) [ 79s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 79s] checking whether ln -s works... yes [ 79s] checking how to run the C preprocessor... riscv64-tizen-linux-gnu-gcc -E [ 79s] checking for mv... /bin/mv [ 79s] checking for tar... /bin/tar [ 79s] checking for perl... /bin/perl [ 79s] checking for wget... /usr/bin/wget [ 79s] checking for xmllint... /usr/bin/xmllint [ 79s] checking for xsltproc... /usr/bin/xsltproc [ 79s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 79s] checking pkg-config is at least version 0.9.0... yes [ 79s] checking how to print strings... printf [ 79s] checking for a sed that does not truncate output... /bin/sed [ 79s] checking for grep that handles long lines and -e... /bin/grep [ 79s] checking for egrep... /bin/grep -E [ 79s] checking for fgrep... /bin/grep -F [ 79s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 79s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 79s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 79s] checking the name lister (/bin/nm) interface... BSD nm [ 79s] checking the maximum length of command line arguments... 1572864 [ 79s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 79s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 79s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 79s] checking for riscv64-tizen-linux-gnu-objdump... no [ 79s] checking for objdump... objdump [ 79s] checking how to recognize dependent libraries... pass_all [ 79s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 79s] checking for dlltool... no [ 79s] checking how to associate runtime and link libraries... printf %s\n [ 79s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 79s] checking for archiver @FILE support... @ [ 79s] checking for riscv64-tizen-linux-gnu-strip... no [ 79s] checking for strip... strip [ 79s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 79s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 79s] checking for sysroot... no [ 79s] checking for a working dd... /bin/dd [ 79s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 79s] checking for riscv64-tizen-linux-gnu-mt... no [ 79s] checking for mt... no [ 80s] checking if : is a manifest tool... no [ 80s] checking for stdio.h... yes [ 80s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for strings.h... yes [ 80s] checking for sys/stat.h... yes [ 80s] checking for sys/types.h... yes [ 80s] checking for unistd.h... yes [ 80s] checking for dlfcn.h... yes [ 80s] checking for objdir... .libs [ 80s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 80s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 80s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 80s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 80s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 80s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 80s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 80s] checking whether -lc should be explicitly linked in... no [ 80s] checking dynamic linker characteristics... GNU/Linux ld.so [ 80s] checking how to hardcode library paths into programs... immediate [ 80s] checking whether stripping libraries is possible... yes [ 80s] checking if libtool supports shared libraries... yes [ 80s] checking whether to build shared libraries... yes [ 80s] checking whether to build static libraries... no [ 80s] checking for cos in -lm... yes [ 80s] Checking zlib [ 80s] checking for zlib... yes [ 80s] Checking lzma [ 80s] checking for liblzma... yes [ 80s] Checking headers [ 80s] checking for fcntl.h... yes [ 80s] checking for unistd.h... (cached) yes [ 80s] checking for sys/stat.h... (cached) yes [ 80s] checking for sys/types.h... (cached) yes [ 80s] checking for stdint.h... (cached) yes [ 80s] checking for inttypes.h... (cached) yes [ 80s] checking for sys/socket.h... yes [ 80s] checking for netinet/in.h... yes [ 80s] checking for arpa/inet.h... yes [ 80s] checking for netdb.h... yes [ 80s] checking for sys/time.h... yes [ 80s] checking for sys/select.h... yes [ 80s] checking for poll.h... yes [ 81s] checking for sys/mman.h... yes [ 81s] checking for sys/timeb.h... yes [ 81s] checking for arpa/nameser.h... yes [ 81s] checking for resolv.h... yes [ 81s] checking for dl.h... no [ 81s] checking for dlfcn.h... (cached) yes [ 81s] Checking types [ 81s] checking for uint32_t... yes [ 81s] Checking libraries [ 81s] checking for gettimeofday... yes [ 81s] checking for ftime... yes [ 81s] checking for stat... yes [ 81s] checking for rand_r... yes [ 81s] checking for isascii... yes [ 81s] checking for mmap... yes [ 81s] checking for munmap... yes [ 81s] checking for putenv... yes [ 81s] checking for va_copy... yes [ 81s] checking whether va_list is an array type... yes [ 81s] checking for library containing gethostent... none required [ 81s] checking for library containing setsockopt... none required [ 81s] checking for library containing connect... none required [ 81s] checking for type of socket length (socklen_t)... socklen_t * [ 81s] checking for const gethostbyname() argument... yes [ 81s] checking for const send() second argument... yes [ 81s] checking whether __attribute__((destructor)) is accepted... yes [ 81s] checking whether to enable IPv6... yes [ 81s] checking struct sockaddr::ss_family... yes [ 81s] checking for getaddrinfo... yes [ 81s] checking for python... no [ 81s] checking for python2... no [ 81s] checking for python3... no [ 81s] checking for python3.9... no [ 81s] checking for python3.8... no [ 81s] checking for python3.7... no [ 81s] checking for python3.6... no [ 81s] checking for python3.5... no [ 81s] checking for python3.4... no [ 81s] checking for python3.3... no [ 81s] checking for python3.2... no [ 81s] checking for python3.1... no [ 81s] checking for python3.0... no [ 81s] checking for python2.7... no [ 81s] checking for python2.6... no [ 81s] checking for python2.5... no [ 81s] checking for python2.4... no [ 81s] checking for python2.3... no [ 81s] checking for python2.2... no [ 81s] checking for python2.1... no [ 81s] checking for python2.0... no [ 81s] configure: error: no suitable Python interpreter found [ 81s] [ 81s] Configure script failed, check config.log for more info. [ 81s] + [[ -e config.sub ]] [ 81s] ++ automake --print-libdir [ 82s] + install -m 0755 /usr/share/automake-1.16/config.sub config.sub [ 82s] + AR=gcc-ar [ 82s] + export AR [ 82s] + NM=/bin/nm [ 82s] + export NM [ 82s] + RANLIB=gcc-ranlib [ 82s] + export RANLIB [ 82s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fPIC' [ 82s] + export CFLAGS [ 82s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 82s] + export CXXFLAGS [ 82s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 82s] + export FFLAGS [ 82s] + ./configure --build=riscv64-tizen-linux-gnu --host=riscv64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --docdir=/usr/share/doc/packages/libxml2 --with-html-dir=/usr/share/doc/packages/libxml2/html --with-fexceptions --with-history --without-python --enable-ipv6 --with-sax1 --with-regexps --with-threads --with-reader --with-http [ 82s] configure: WARNING: unrecognized options: --with-html-dir [ 82s] checking build system type... riscv64-tizen-linux-gnu [ 82s] checking host system type... riscv64-tizen-linux-gnu [ 82s] checking for a BSD-compatible install... /bin/install -c [ 82s] checking whether build environment is sane... yes [ 82s] checking for a race-free mkdir -p... /bin/mkdir -p [ 82s] checking for gawk... gawk [ 82s] checking whether make sets $(MAKE)... yes [ 82s] checking whether make supports nested variables... yes [ 82s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 82s] checking whether make supports nested variables... (cached) yes [ 82s] checking for riscv64-tizen-linux-gnu-gcc... riscv64-tizen-linux-gnu-gcc [ 82s] checking whether the C compiler works... yes [ 82s] checking for C compiler default output file name... a.out [ 82s] checking for suffix of executables... [ 83s] checking whether we are cross compiling... no [ 83s] checking for suffix of object files... o [ 83s] checking whether the compiler supports GNU C... yes [ 83s] checking whether riscv64-tizen-linux-gnu-gcc accepts -g... yes [ 83s] checking for riscv64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 83s] checking whether riscv64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 83s] checking whether make supports the include directive... yes (GNU style) [ 83s] checking dependency style of riscv64-tizen-linux-gnu-gcc... gcc3 [ 83s] checking whether ln -s works... yes [ 83s] checking how to run the C preprocessor... riscv64-tizen-linux-gnu-gcc -E [ 83s] checking for mv... /bin/mv [ 83s] checking for tar... /bin/tar [ 83s] checking for perl... /bin/perl [ 83s] checking for wget... /usr/bin/wget [ 83s] checking for xmllint... /usr/bin/xmllint [ 83s] checking for xsltproc... /usr/bin/xsltproc [ 83s] checking for riscv64-tizen-linux-gnu-pkg-config... /bin/riscv64-tizen-linux-gnu-pkg-config [ 83s] checking pkg-config is at least version 0.9.0... yes [ 83s] checking how to print strings... printf [ 83s] checking for a sed that does not truncate output... /bin/sed [ 83s] checking for grep that handles long lines and -e... /bin/grep [ 83s] checking for egrep... /bin/grep -E [ 83s] checking for fgrep... /bin/grep -F [ 83s] checking for ld used by riscv64-tizen-linux-gnu-gcc... /usr/riscv64-tizen-linux-gnu/bin/ld [ 83s] checking if the linker (/usr/riscv64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 83s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 83s] checking the name lister (/bin/nm) interface... BSD nm [ 83s] checking the maximum length of command line arguments... 1572864 [ 83s] checking how to convert riscv64-tizen-linux-gnu file names to riscv64-tizen-linux-gnu format... func_convert_file_noop [ 83s] checking how to convert riscv64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 83s] checking for /usr/riscv64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 83s] checking for riscv64-tizen-linux-gnu-objdump... no [ 83s] checking for objdump... objdump [ 83s] checking how to recognize dependent libraries... pass_all [ 83s] checking for riscv64-tizen-linux-gnu-dlltool... no [ 83s] checking for dlltool... no [ 83s] checking how to associate runtime and link libraries... printf %s\n [ 83s] checking for riscv64-tizen-linux-gnu-ar... gcc-ar [ 83s] checking for archiver @FILE support... @ [ 83s] checking for riscv64-tizen-linux-gnu-strip... no [ 83s] checking for strip... strip [ 83s] checking for riscv64-tizen-linux-gnu-ranlib... gcc-ranlib [ 83s] checking command to parse /bin/nm output from riscv64-tizen-linux-gnu-gcc object... ok [ 83s] checking for sysroot... no [ 83s] checking for a working dd... /bin/dd [ 83s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 83s] checking for riscv64-tizen-linux-gnu-mt... no [ 83s] checking for mt... no [ 83s] checking if : is a manifest tool... no [ 83s] checking for stdio.h... yes [ 83s] checking for stdlib.h... yes [ 83s] checking for string.h... yes [ 83s] checking for inttypes.h... yes [ 83s] checking for stdint.h... yes [ 83s] checking for strings.h... yes [ 83s] checking for sys/stat.h... yes [ 83s] checking for sys/types.h... yes [ 83s] checking for unistd.h... yes [ 83s] checking for dlfcn.h... yes [ 83s] checking for objdir... .libs [ 84s] checking if riscv64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 84s] checking for riscv64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 84s] checking if riscv64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 84s] checking if riscv64-tizen-linux-gnu-gcc static flag -static works... no [ 84s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 84s] checking if riscv64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 84s] checking whether the riscv64-tizen-linux-gnu-gcc linker (/usr/riscv64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 84s] checking whether -lc should be explicitly linked in... no [ 84s] checking dynamic linker characteristics... GNU/Linux ld.so [ 84s] checking how to hardcode library paths into programs... immediate [ 84s] checking whether stripping libraries is possible... yes [ 84s] checking if libtool supports shared libraries... yes [ 84s] checking whether to build shared libraries... yes [ 84s] checking whether to build static libraries... no [ 84s] checking for cos in -lm... yes [ 84s] Checking zlib [ 84s] checking for zlib... yes [ 84s] Checking lzma [ 84s] checking for liblzma... yes [ 84s] Checking headers [ 84s] checking for fcntl.h... yes [ 84s] checking for unistd.h... (cached) yes [ 84s] checking for sys/stat.h... (cached) yes [ 84s] checking for sys/types.h... (cached) yes [ 84s] checking for stdint.h... (cached) yes [ 84s] checking for inttypes.h... (cached) yes [ 84s] checking for sys/socket.h... yes [ 84s] checking for netinet/in.h... yes [ 84s] checking for arpa/inet.h... yes [ 84s] checking for netdb.h... yes [ 84s] checking for sys/time.h... yes [ 84s] checking for sys/select.h... yes [ 84s] checking for poll.h... yes [ 84s] checking for sys/mman.h... yes [ 84s] checking for sys/timeb.h... yes [ 84s] checking for arpa/nameser.h... yes [ 84s] checking for resolv.h... yes [ 84s] checking for dl.h... no [ 84s] checking for dlfcn.h... (cached) yes [ 84s] Checking types [ 84s] checking for uint32_t... yes [ 84s] Checking libraries [ 84s] checking for gettimeofday... yes [ 84s] checking for ftime... yes [ 84s] checking for stat... yes [ 84s] checking for rand_r... yes [ 84s] checking for isascii... yes [ 84s] checking for mmap... yes [ 85s] checking for munmap... yes [ 85s] checking for putenv... yes [ 85s] checking for va_copy... yes [ 85s] checking whether va_list is an array type... yes [ 85s] checking for library containing gethostent... none required [ 85s] checking for library containing setsockopt... none required [ 85s] checking for library containing connect... none required [ 85s] checking for type of socket length (socklen_t)... socklen_t * [ 85s] checking for const gethostbyname() argument... yes [ 85s] checking for const send() second argument... yes [ 85s] checking whether __attribute__((destructor)) is accepted... yes [ 85s] checking whether to enable IPv6... yes [ 85s] checking struct sockaddr::ss_family... yes [ 85s] checking for getaddrinfo... yes [ 85s] checking for shl_load... no [ 85s] checking for shl_load in -ldld... no [ 85s] checking for dlopen... yes [ 85s] Checking configuration requirements [ 85s] Enabling multithreaded support [ 85s] checking for pthread.h... yes [ 85s] checking for pthread_join in -lpthread... yes [ 85s] Enabling xmllint shell history [ 85s] checking for tputs in -lncurses... no [ 85s] checking for tputs in -lcurses... no [ 85s] checking for tputs in -ltermcap... no [ 85s] checking for tputs in -lterminfo... no [ 85s] checking for tputs in -ltermlib... no [ 85s] checking for readline/history.h... yes [ 85s] checking for append_history in -lhistory... yes [ 85s] checking for readline/readline.h... yes [ 85s] checking for readline in -lreadline... yes [ 85s] Disabling FTP support [ 85s] Disabling deprecated APIs [ 85s] Enabled Schematron support [ 85s] checking for iconv.h... yes [ 85s] checking for iconv... yes [ 85s] Disabling ICU support [ 85s] Enabled Schemas/Relax-NG support [ 86s] checking for snprintf... yes [ 86s] checking for vsnprintf... yes [ 86s] Disabling code coverage for GCC [ 86s] checking that generated files are newer than configure... done [ 86s] configure: creating ./config.status [ 86s] config.status: creating libxml2.spec [ 86s] config.status: creating Makefile [ 86s] config.status: creating include/Makefile [ 86s] config.status: creating include/libxml/Makefile [ 86s] config.status: creating doc/Makefile [ 86s] config.status: creating doc/examples/Makefile [ 86s] config.status: creating doc/devhelp/Makefile [ 86s] config.status: creating example/Makefile [ 86s] config.status: creating fuzz/Makefile [ 86s] config.status: creating python/Makefile [ 86s] config.status: creating python/tests/Makefile [ 86s] config.status: creating xstc/Makefile [ 86s] config.status: creating include/libxml/xmlversion.h [ 86s] config.status: creating libxml-2.0.pc [ 86s] config.status: creating libxml-2.0-uninstalled.pc [ 86s] config.status: creating libxml2-config.cmake [ 86s] config.status: creating python/setup.py [ 86s] config.status: creating xml2-config [ 87s] config.status: creating config.h [ 87s] config.status: executing depfiles commands [ 87s] config.status: executing libtool commands [ 87s] configure: WARNING: unrecognized options: --with-html-dir [ 87s] Done configuring [ 87s] + make -j12 BASE_DIR=/usr/share/doc/packages DOC_MODULE=libxml2 [ 87s] make all-recursive [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 87s] Making all in include [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 87s] Making all in libxml [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 87s] make[3]: Nothing to be done for 'all'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 87s] make[3]: Nothing to be done for 'all-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 87s] Making all in . [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 87s] CC xmllint.o [ 87s] CC libxml2_la-SAX.lo [ 87s] CC libxml2_la-entities.lo [ 87s] CC libxml2_la-encoding.lo [ 87s] CC libxml2_la-error.lo [ 87s] CC libxml2_la-parserInternals.lo [ 87s] CC libxml2_la-parser.lo [ 87s] CC libxml2_la-tree.lo [ 87s] CC libxml2_la-hash.lo [ 87s] CC libxml2_la-list.lo [ 87s] CC libxml2_la-xmlIO.lo [ 87s] CC libxml2_la-xmlmemory.lo [ 87s] encoding.c: In function 'UTF16LEToUTF8': [ 87s] encoding.c:514:26: warning: cast increases required alignment of target type [-Wcast-align] [ 87s] 514 | unsigned short* in = (unsigned short*) inb; [ 87s] | ^ [ 87s] encoding.c: In function 'UTF8ToUTF16LE': [ 87s] encoding.c:601:27: warning: cast increases required alignment of target type [-Wcast-align] [ 87s] 601 | unsigned short* out = (unsigned short*) outb; [ 87s] | ^ [ 87s] encoding.c: In function 'UTF16BEToUTF8': [ 87s] encoding.c:757:26: warning: cast increases required alignment of target type [-Wcast-align] [ 87s] 757 | unsigned short* in = (unsigned short*) inb; [ 87s] | ^ [ 87s] encoding.c: In function 'UTF8ToUTF16BE': [ 87s] encoding.c:844:27: warning: cast increases required alignment of target type [-Wcast-align] [ 87s] 844 | unsigned short* out = (unsigned short*) outb; [ 87s] | ^ [ 88s] CC libxml2_la-uri.lo [ 88s] CC libxml2_la-valid.lo [ 88s] CC libxml2_la-xlink.lo [ 88s] CC libxml2_la-HTMLparser.lo [ 88s] CC libxml2_la-HTMLtree.lo [ 88s] CC libxml2_la-debugXML.lo [ 88s] CC libxml2_la-xpath.lo [ 88s] CC libxml2_la-xpointer.lo [ 88s] CC libxml2_la-xinclude.lo [ 88s] CC libxml2_la-nanohttp.lo [ 88s] CC libxml2_la-nanoftp.lo [ 88s] CC libxml2_la-catalog.lo [ 88s] CC libxml2_la-globals.lo [ 88s] CC libxml2_la-threads.lo [ 89s] CC libxml2_la-c14n.lo [ 89s] threads.c: In function 'xmlInitThreads': [ 89s] threads.c:864:28: warning: the comparison will always evaluate as 'true' for the address of 'pthread_equal' will never be NULL [-Waddress] [ 89s] 864 | (pthread_equal != NULL) && [ 89s] | ^~ [ 89s] In file included from /usr/include/features.h:491, [ 89s] from /usr/include/bits/libc-header-start.h:33, [ 89s] from /usr/include/stdio.h:27, [ 89s] from libxml.h:46, [ 89s] from threads.c:11: [ 89s] /usr/lib64/gcc/riscv64-tizen-linux-gnu/13.1.0/include-fixed/pthread.h:1349:1: note: 'pthread_equal' declared here [ 89s] 1349 | __NTH (pthread_equal (pthread_t __thread1, pthread_t __thread2)) [ 89s] | ^~~~~ [ 89s] CC libxml2_la-xmlstring.lo [ 89s] CC libxml2_la-buf.lo [ 89s] CC libxml2_la-xmlregexp.lo [ 89s] CC libxml2_la-xmlschemas.lo [ 89s] CC libxml2_la-xmlschemastypes.lo [ 89s] CC libxml2_la-xmlunicode.lo [ 89s] CC libxml2_la-xmlreader.lo [ 89s] CC libxml2_la-relaxng.lo [ 89s] CC libxml2_la-dict.lo [ 89s] CC libxml2_la-SAX2.lo [ 89s] CC libxml2_la-xmlwriter.lo [ 90s] CC libxml2_la-legacy.lo [ 90s] CC libxml2_la-chvalid.lo [ 90s] CC libxml2_la-pattern.lo [ 90s] CC libxml2_la-xmlsave.lo [ 90s] CC libxml2_la-xmlmodule.lo [ 90s] CC libxml2_la-schematron.lo [ 90s] CC libxml2_la-xzlib.lo [ 90s] CC xmlcatalog.o [ 90s] CC testdso.lo [ 91s] CCLD testdso.la [ 96s] CCLD libxml2.la [ 97s] CCLD xmllint [ 97s] CCLD xmlcatalog [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 97s] Making all in doc [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 97s] Making all in . [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 97s] make[3]: Nothing to be done for 'all-am'. [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 97s] Making all in devhelp [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 97s] make[3]: Nothing to be done for 'all'. [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 97s] Making all in examples [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 97s] make[3]: Nothing to be done for 'all'. [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 97s] Making all in example [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 97s] make[2]: Nothing to be done for 'all'. [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 97s] Making all in fuzz [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 97s] make[2]: Nothing to be done for 'all'. [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 97s] Making all in xstc [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 97s] make[2]: Nothing to be done for 'all'. [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 97s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 97s] + exit 0 [ 97s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vT1ULf [ 97s] + umask 022 [ 97s] + cd /home/abuild/rpmbuild/BUILD [ 97s] + cd libxml2-2.10.2 [ 97s] + LANG=C [ 97s] + export LANG [ 97s] + unset DISPLAY [ 97s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 [ 97s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 [ 97s] + make install DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 BASE_DIR=/usr/share/doc/packages DOC_MODULE=libxml2 [ 97s] Making install in include [ 97s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] Making install in libxml [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 97s] make[3]: Nothing to be done for 'install-exec-am'. [ 97s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml2/libxml' [ 97s] /bin/install -c -m 644 xmlversion.h '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml2/libxml' [ 97s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml2/libxml' [ 97s] /bin/install -c -m 644 SAX.h entities.h encoding.h parser.h parserInternals.h xmlerror.h HTMLparser.h HTMLtree.h debugXML.h tree.h list.h hash.h xpath.h xpathInternals.h xpointer.h xinclude.h xmlIO.h xmlmemory.h nanohttp.h nanoftp.h uri.h valid.h xlink.h catalog.h threads.h globals.h c14n.h xmlautomata.h xmlregexp.h xmlmodule.h xmlschemas.h schemasInternals.h xmlschemastypes.h xmlstring.h xmlunicode.h xmlreader.h relaxng.h dict.h SAX2.h xmlexports.h '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml2/libxml' [ 97s] /bin/install -c -m 644 xmlwriter.h chvalid.h pattern.h xmlsave.h schematron.h '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml2/libxml' [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include/libxml' [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] make[3]: Nothing to be done for 'install-exec-am'. [ 97s] make[3]: Nothing to be done for 'install-data-am'. [ 97s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/include' [ 97s] Making install in . [ 97s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 97s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 97s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64' [ 97s] /bin/sh ./libtool --mode=install /bin/install -c libxml2.la '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64' [ 97s] libtool: install: /bin/install -c .libs/libxml2.so.2.10.2 /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2 [ 97s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64 && { ln -s -f libxml2.so.2.10.2 libxml2.so.2 || { rm -f libxml2.so.2 && ln -s libxml2.so.2.10.2 libxml2.so.2; }; }) [ 97s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64 && { ln -s -f libxml2.so.2.10.2 libxml2.so || { rm -f libxml2.so && ln -s libxml2.so.2.10.2 libxml2.so; }; }) [ 97s] libtool: install: /bin/install -c .libs/libxml2.lai /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.la [ 97s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 97s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin' [ 97s] /bin/sh ./libtool --mode=install /bin/install -c xmllint xmlcatalog '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin' [ 97s] libtool: warning: './libxml2.la' has not been installed in '/usr/lib64' [ 97s] libtool: install: /bin/install -c .libs/xmllint /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint [ 98s] libtool: warning: './libxml2.la' has not been installed in '/usr/lib64' [ 98s] libtool: install: /bin/install -c .libs/xmlcatalog /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin' [ 98s] /bin/install -c xml2-config '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/cmake/libxml2' [ 98s] /bin/install -c -m 644 libxml2-config.cmake '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/cmake/libxml2' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/examples' [ 98s] /bin/install -c -m 644 xmllint.c '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/examples' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/aclocal' [ 98s] /bin/install -c -m 644 libxml.m4 '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/aclocal' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/pkgconfig' [ 98s] /bin/install -c -m 644 libxml-2.0.pc '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/pkgconfig' [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2' [ 98s] Making install in doc [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] Making install in . [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] make[3]: Nothing to be done for 'install-exec-am'. [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/man/man1' [ 98s] /bin/install -c -m 644 xml2-config.1 xmllint.1 xmlcatalog.1 '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/man/man1' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial/images' [ 98s] /bin/install -c -m 644 tutorial/images/blank.png tutorial/images/caution.png tutorial/images/draft.png tutorial/images/home.png tutorial/images/important.png tutorial/images/next.png tutorial/images/note.png tutorial/images/prev.png tutorial/images/tip.png tutorial/images/toc-blank.png tutorial/images/toc-minus.png tutorial/images/toc-plus.png tutorial/images/up.png tutorial/images/warning.png '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial/images' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial' [ 98s] /bin/install -c -m 644 tutorial/apa.html tutorial/apb.html tutorial/apc.html tutorial/apd.html tutorial/ape.html tutorial/apf.html tutorial/apg.html tutorial/aph.html tutorial/api.html tutorial/ar01s02.html tutorial/ar01s03.html tutorial/ar01s04.html tutorial/ar01s05.html tutorial/ar01s06.html tutorial/ar01s07.html tutorial/ar01s08.html tutorial/ar01s09.html tutorial/includeaddattribute.c tutorial/includeaddkeyword.c tutorial/includeconvert.c tutorial/includegetattribute.c tutorial/includekeyword.c tutorial/includexpath.c tutorial/index.html tutorial/ix01.html '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial' [ 98s] /bin/install -c -m 644 xmlcatalog.html xmllint.html '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/.' [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial/images/callouts' [ 98s] /bin/install -c -m 644 tutorial/images/callouts/1.png tutorial/images/callouts/10.png tutorial/images/callouts/2.png tutorial/images/callouts/3.png tutorial/images/callouts/4.png tutorial/images/callouts/5.png tutorial/images/callouts/6.png tutorial/images/callouts/7.png tutorial/images/callouts/8.png tutorial/images/callouts/9.png '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/tutorial/images/callouts' [ 98s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] Making install in devhelp [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 98s] make[3]: Nothing to be done for 'install-exec-am'. [ 98s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/gtk-doc/html/libxml2' [ 98s] /bin/install -c -m 644 libxml2.devhelp2 general.html index.html libxml2-c14n.html libxml2-catalog.html libxml2-chvalid.html libxml2-debugXML.html libxml2-dict.html libxml2-encoding.html libxml2-entities.html libxml2-globals.html libxml2-hash.html libxml2-HTMLparser.html libxml2-HTMLtree.html libxml2-list.html libxml2-nanoftp.html libxml2-nanohttp.html libxml2-parser.html libxml2-parserInternals.html libxml2-pattern.html libxml2-relaxng.html libxml2-SAX2.html libxml2-SAX.html libxml2-schemasInternals.html libxml2-schematron.html libxml2-threads.html libxml2-tree.html libxml2-uri.html libxml2-valid.html libxml2-xinclude.html libxml2-xlink.html libxml2-xmlautomata.html libxml2-xmlerror.html libxml2-xmlexports.html libxml2-xmlIO.html libxml2-xmlmemory.html libxml2-xmlmodule.html libxml2-xmlreader.html libxml2-xmlregexp.html libxml2-xmlsave.html '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/gtk-doc/html/libxml2' [ 98s] /bin/install -c -m 644 libxml2-xmlschemas.html libxml2-xmlschemastypes.html libxml2-xmlstring.html libxml2-xmlunicode.html libxml2-xmlversion.html libxml2-xmlwriter.html libxml2-xpath.html libxml2-xpathInternals.html libxml2-xpointer.html home.png left.png right.png up.png style.css '/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/gtk-doc/html/libxml2' [ 98s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/devhelp' [ 98s] Making install in examples [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 98s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 98s] make[3]: Nothing to be done for 'install-exec-am'. [ 98s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/examples [ 98s] /bin/install -c -m 0644 ./*.html ./*.c /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages/libxml2/examples/ [ 98s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc/examples' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/doc' [ 98s] Making install in example [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 98s] make[2]: Nothing to be done for 'install-exec-am'. [ 98s] make[2]: Nothing to be done for 'install-data-am'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/example' [ 98s] Making install in fuzz [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 98s] make[2]: Nothing to be done for 'install-exec-am'. [ 98s] make[2]: Nothing to be done for 'install-data-am'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/fuzz' [ 98s] Making install in xstc [ 98s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 98s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 98s] make[2]: Nothing to be done for 'install-exec-am'. [ 98s] make[2]: Nothing to be done for 'install-data-am'. [ 98s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 98s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libxml2-2.10.2/xstc' [ 98s] + ln -s libxml2/libxml /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/include/libxml [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/info [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/packages [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/libxml2 [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc/libxml2-2.10.2 [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/gtk-doc [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/doc [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/man [ 98s] + find /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 -regex '.*/man/man./.*.[0-9]' [ 98s] + xargs rm -f -- [ 98s] + find /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 -regex '.*/man/../man./.*.[0-9]' [ 98s] + xargs rm -f -- [ 98s] + find /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 -regex '.*/man/man./.*.[0-9]pm' [ 98s] + xargs rm -f -- [ 98s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.10.2-1.9 --unique-debug-src-base libxml2-2.10.2-1.9.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libxml2-2.10.2 [ 98s] 1+0 records in [ 98s] 1+0 records out [ 98s] 7 bytes (7 B) copied, 0.0003385 s, 20.7 kB/s [ 98s] 1+0 records in [ 98s] 1+0 records out [ 98s] 7 bytes (7 B) copied1+0 records in [ 98s] 1+0 records out [ 98s] 7 bytes (7 B) copied, 0.000559021 s, 12.5 kB/s [ 98s] , 0.000561763 s, 12.5 kB/s [ 98s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog [ 98s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2 [ 98s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog: Unknown debugging section .debug_line_str [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog: Unknown debugging section .debug_loclists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog: Unknown debugging section .debug_rnglists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmlcatalog: DWARF version 5 unhandled [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint: Unknown debugging section .debug_line_str [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint: Unknown debugging section .debug_loclists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint: Unknown debugging section .debug_rnglists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/bin/xmllint: DWARF version 5 unhandled [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2: Unknown debugging section .debug_line_str [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2: Unknown debugging section .debug_loclists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2: Unknown debugging section .debug_rnglists [ 98s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/lib64/libxml2.so.2.10.2: DWARF version 5 unhandled [ 98s] 0+0 records in [ 98s] 0+0 records out [ 98s] 0 bytes (0 B) copied, 0.000258232 s, 0.0 kB/s [ 98s] 0+0 records in [ 98s] 0+0 records out [ 98s] 0 bytes (0 B) copied, 0.000240444 s, 0.0 kB/s [ 98s] 0+0 records in [ 98s] 0+0 records out [ 98s] 0 bytes (0 B) copied, 0.000422075 s, 0.0 kB/s [ 98s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libxml2-2.10.2/libxml2-debuginfo.manifest [ 98s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libxml2-2.10.2/libxml2-debugsource.manifest [ 98s] + /usr/lib/rpm/check-buildroot [ 98s] + /usr/lib/rpm//brp-compress [ 98s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 99s] + /usr/lib/rpm/brp-python-hardlink [ 99s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 [ 99s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libxml2-2.10.2/isu.list [ 99s] ~/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 ~/rpmbuild/BUILD/libxml2-2.10.2 [ 99s] ~/rpmbuild/BUILD/libxml2-2.10.2 [ 99s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.8cWl5M [ 99s] Processing files: libxml2-2.10.2-1.9.riscv64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.TIvrEU [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd libxml2-2.10.2 [ 99s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2 [ 99s] + export LC_ALL=C [ 99s] + LC_ALL=C [ 99s] + export LICENSEDIR [ 99s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2 [ 99s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2 [ 99s] + exit 0 [ 99s] Provides: libxml2 = 2.10.2-1.9 libxml2(riscv-64) = 2.10.2-1.9 libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.5.4)(64bit) libxml2.so.2(LIBXML2_2.5.5)(64bit) libxml2.so.2(LIBXML2_2.5.6)(64bit) libxml2.so.2(LIBXML2_2.5.7)(64bit) libxml2.so.2(LIBXML2_2.5.8)(64bit) libxml2.so.2(LIBXML2_2.5.9)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.1)(64bit) libxml2.so.2(LIBXML2_2.6.10)(64bit) libxml2.so.2(LIBXML2_2.6.11)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.14)(64bit) libxml2.so.2(LIBXML2_2.6.15)(64bit) libxml2.so.2(LIBXML2_2.6.16)(64bit) libxml2.so.2(LIBXML2_2.6.17)(64bit) libxml2.so.2(LIBXML2_2.6.18)(64bit) libxml2.so.2(LIBXML2_2.6.19)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxml2.so.2(LIBXML2_2.6.20)(64bit) libxml2.so.2(LIBXML2_2.6.21)(64bit) libxml2.so.2(LIBXML2_2.6.23)(64bit) libxml2.so.2(LIBXML2_2.6.24)(64bit) libxml2.so.2(LIBXML2_2.6.25)(64bit) libxml2.so.2(LIBXML2_2.6.27)(64bit) libxml2.so.2(LIBXML2_2.6.28)(64bit) libxml2.so.2(LIBXML2_2.6.29)(64bit) libxml2.so.2(LIBXML2_2.6.3)(64bit) libxml2.so.2(LIBXML2_2.6.32)(64bit) libxml2.so.2(LIBXML2_2.6.5)(64bit) libxml2.so.2(LIBXML2_2.6.6)(64bit) libxml2.so.2(LIBXML2_2.6.7)(64bit) libxml2.so.2(LIBXML2_2.6.8)(64bit) libxml2.so.2(LIBXML2_2.7.0)(64bit) libxml2.so.2(LIBXML2_2.7.3)(64bit) libxml2.so.2(LIBXML2_2.7.4)(64bit) libxml2.so.2(LIBXML2_2.8.0)(64bit) libxml2.so.2(LIBXML2_2.9.0)(64bit) libxml2.so.2(LIBXML2_2.9.1)(64bit) libxml2.so.2(LIBXML2_2.9.11)(64bit) libxml2.so.2(LIBXML2_2.9.8)(64bit) [ 99s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires(post): /sbin/ldconfig [ 99s] Requires(postun): /sbin/ldconfig [ 99s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libc.so.6(GLIBC_2.28)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) liblzma.so.5()(64bit) liblzma.so.5(XZ_5.0)(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.27)(64bit) libz.so.1()(64bit) libz.so.1(ZLIB_1.2.2.3)(64bit) libz.so.1(ZLIB_1.2.3.3)(64bit) [ 99s] Processing files: libxml2-debugsource-2.10.2-1.9.riscv64 [ 99s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libxml2-2.10.2/debugsourcefiles.list [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Processing files: libxml2-tools-2.10.2-1.9.riscv64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.tpGlo7 [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd libxml2-2.10.2 [ 99s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-tools [ 99s] + export LC_ALL=C [ 99s] + LC_ALL=C [ 99s] + export LICENSEDIR [ 99s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-tools [ 99s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-tools [ 99s] + exit 0 [ 99s] Provides: libxml2-tools = 2.10.2-1.9 libxml2-tools(riscv-64) = 2.10.2-1.9 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libreadline.so.5()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.5.0)(64bit) libxml2.so.2(LIBXML2_2.5.2)(64bit) libxml2.so.2(LIBXML2_2.5.6)(64bit) libxml2.so.2(LIBXML2_2.5.7)(64bit) libxml2.so.2(LIBXML2_2.5.8)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.18)(64bit) libxml2.so.2(LIBXML2_2.6.20)(64bit) libxml2.so.2(LIBXML2_2.6.21)(64bit) libxml2.so.2(LIBXML2_2.6.3)(64bit) libxml2.so.2(LIBXML2_2.6.8)(64bit) libxml2.so.2(LIBXML2_2.9.0)(64bit) [ 99s] Processing files: libxml2-devel-2.10.2-1.9.riscv64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.AWCb6E [ 99s] + umask 022 [ 99s] + cd /home/abuild/rpmbuild/BUILD [ 99s] + cd libxml2-2.10.2 [ 99s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-devel [ 99s] + export LC_ALL=C [ 99s] + LC_ALL=C [ 99s] + export LICENSEDIR [ 99s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-devel [ 99s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64/usr/share/licenses/libxml2-devel [ 99s] + exit 0 [ 99s] Provides: libtool(/usr/lib64/libxml2.la) libxml2-devel = 2.10.2-1.9 libxml2-devel(riscv-64) = 2.10.2-1.9 pkgconfig(libxml-2.0) = 2.10.2 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires: /bin/sh /usr/bin/pkg-config libxml2.so.2()(64bit) [ 99s] Processing files: libxml2-debuginfo-2.10.2-1.9.riscv64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: libxml2-debuginfo = 2.10.2-1.9 libxml2-debuginfo(riscv-64) = 2.10.2-1.9 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Recommends: libxml2-debugsource(riscv-64) = 2.10.2-1.9 [ 99s] Processing files: libxml2-tools-debuginfo-2.10.2-1.9.riscv64 [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: libxml2-tools-debuginfo = 2.10.2-1.9 libxml2-tools-debuginfo(riscv-64) = 2.10.2-1.9 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Recommends: libxml2-debugsource(riscv-64) = 2.10.2-1.9 [ 99s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 [ 99s] Wrote: /home/abuild/rpmbuild/SRPMS/libxml2-2.10.2-1.9.src.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-2.10.2-1.9.riscv64.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-debugsource-2.10.2-1.9.riscv64.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-tools-2.10.2-1.9.riscv64.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-devel-2.10.2-1.9.riscv64.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-debuginfo-2.10.2-1.9.riscv64.rpm [ 102s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/libxml2-tools-debuginfo-2.10.2-1.9.riscv64.rpm [ 102s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.nkKjEz [ 102s] + umask 022 [ 102s] + cd /home/abuild/rpmbuild/BUILD [ 102s] + cd libxml2-2.10.2 [ 102s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libxml2-2.10.2-1.9.riscv64 [ 102s] + exit 0 [ 102s] ... checking for files with abuild user/group [ 102s] ... creating baselibs [ 102s] no targets for arch riscv64, nothing to do [ 102s] [ 102s] 6d72f3f56c3f finished "build libxml2.spec" at Mon Jul 17 08:48:57 UTC 2023. [ 102s]