[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] 27e631299862 started "build libdbuspolicy-header.spec" at Wed May 6 12:09:21 UTC 2026. [ 1s] [ 1s] Building libdbuspolicy-header for project 'Tizen-10.0-Base-MR' repository 'standard' arch 'armv7l' srcmd5 '930bad33e3dd593632fb39675a69b13f' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/libdbuspolicy-header.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/libdbuspolicy-header.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/18/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.18/.build-srcdir/libdbuspolicy-header.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/42] preinstalling libmagic-data... [ 4s] [2/42] preinstalling libncurses... [ 4s] [3/42] preinstalling setup... [ 4s] [4/42] preinstalling filesystem... [ 4s] [5/42] preinstalling glibc... [ 5s] [6/42] preinstalling libgcc... [ 5s] [7/42] preinstalling bash... [ 5s] [8/42] preinstalling diffutils... [ 5s] [9/42] preinstalling grep... [ 5s] [10/42] preinstalling libattr... [ 5s] [11/42] preinstalling libblkid... [ 5s] [12/42] preinstalling libbz2... [ 6s] [13/42] preinstalling libcap... [ 6s] [14/42] preinstalling libfreebl3... [ 6s] [15/42] preinstalling liblua... [ 6s] [16/42] preinstalling liblzma... [ 6s] [17/42] preinstalling libpopt... [ 6s] [18/42] preinstalling libreadline... [ 6s] [19/42] preinstalling libsmack... [ 6s] [20/42] preinstalling libsqlite... [ 6s] [21/42] preinstalling libuuid... [ 7s] [22/42] preinstalling libxcrypt... [ 7s] [23/42] preinstalling libxml2... [ 7s] [24/42] preinstalling libzstd1... [ 7s] [25/42] preinstalling nspr... [ 7s] [26/42] preinstalling sed... [ 7s] [27/42] preinstalling zlib... [ 7s] [28/42] preinstalling qemu-accel-x86_64-armv7l... [ 19s] [29/42] preinstalling qemu-linux-user-x86_64-cross... [ 23s] [30/42] preinstalling coreutils... [ 23s] [31/42] preinstalling libacl... [ 23s] [32/42] preinstalling libelf... [ 23s] [33/42] preinstalling libmount... [ 23s] [34/42] preinstalling smack... [ 23s] [35/42] preinstalling bzip2... [ 23s] [36/42] preinstalling libmagic... [ 23s] [37/42] preinstalling tar... [ 23s] [38/42] preinstalling util-linux... [ 23s] [39/42] preinstalling util-linux-su... [ 23s] [40/42] preinstalling nss... [ 23s] [41/42] preinstalling libsoftokn3... [ 23s] [42/42] preinstalling rpm... [ 24s] running qemu-linux-user-x86_64-cross postinstall script [ 24s] running qemu-accel-x86_64-armv7l postinstall script [ 24s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 24s] running setup postinstall script [ 24s] chroot: failed to run command '': No such file or directory [ 24s] initializing rpm db... [ 25s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 25s] breaking dependency libxcrypt-devel -> glibc-devel [ 25s] cycle: libsoftokn3 -> nss [ 25s] breaking dependency nss -> libsoftokn3 [ 25s] done [ 25s] querying package ids... [ 25s] [1/97] cumulate libmagic-data-5.45-1.11 [ 25s] [2/97] cumulate setup-0.9-1.6 [ 25s] [3/97] cumulate filesystem-3.1-2.1 [ 25s] [4/97] cumulate glibc-2.40-3.3 [ 25s] [5/97] cumulate libatomic-14.2.0-2.10 [ 25s] [6/97] cumulate libgcc-14.2.0-2.10 [ 25s] [7/97] cumulate bash-3.2.57-1.2 [ 25s] [8/97] cumulate cpio-2.8-1.2 [ 25s] [9/97] cumulate diffutils-3.10-1.2 [ 25s] [10/97] cumulate findutils-4.3.8-1.12 [ 25s] [11/97] cumulate gdbm-1.8.3-1.18 [ 25s] [12/97] cumulate hostname-3.23-1.2 [ 25s] [13/97] cumulate libattr-2.5.1-1.13 [ 25s] [14/97] cumulate libblkid-2.39.3-2.8 [ 25s] [15/97] cumulate libbz2-1.0.8-1.13 [ 25s] [16/97] cumulate libcap-2.73-1.13 [ 25s] [17/97] cumulate libfreebl3-3.109-1.18 [ 25s] [18/97] cumulate libgfortran-14.2.0-2.10 [ 25s] [19/97] cumulate libgomp-14.2.0-2.10 [ 25s] [20/97] cumulate libitm-14.2.0-2.10 [ 25s] [21/97] cumulate libltdl-2.4.7-1.18 [ 25s] [22/97] cumulate liblua-5.1.5-1.11 [ 25s] [23/97] cumulate liblzma-5.8.1-1.5 [ 25s] [24/97] cumulate libopenssl3-3.0.20-1.1 [ 25s] [25/97] cumulate libpcre-8.45-1.12 [ 25s] [26/97] cumulate libpopt-1.16-1.11 [ 25s] [27/97] cumulate libsmack-1.3.1-1.11 [ 25s] [28/97] cumulate libsmartcols-2.39.3-2.8 [ 25s] [29/97] cumulate libsqlite-3.50.2-1.12 [ 25s] [30/97] cumulate libstdc++-14.2.0-2.10 [ 25s] [31/97] cumulate libuuid-2.39.3-2.8 [ 25s] [32/97] cumulate libxcrypt-4.4.36-1.16 [ 25s] [33/97] cumulate libxml2-2.13.5-1.14 [ 25s] [34/97] cumulate libzstd1-1.5.6-1.14 [ 25s] [35/97] cumulate m4-1.4.19-1.2 [ 25s] [36/97] cumulate net-tools-2.0_20121208git-1.11 [ 25s] [37/97] cumulate nspr-4.36-1.11 [ 25s] [38/97] cumulate patch-2.7.6-1.11 [ 25s] [39/97] cumulate pkg-config-0.29.2-1.14 [ 25s] [40/97] cumulate sed-4.1c-1.12 [ 25s] [41/97] cumulate update-alternatives-1.22.2-1.2 [ 25s] [42/97] cumulate which-2.17-1.2 [ 25s] [43/97] cumulate zlib-1.3.1-1.16 [ 25s] [44/97] cumulate build-compare-2023.06.18-1.7 [ 25s] [45/97] cumulate hal-rootstrap-checker-1.0.0-3.1 [ 25s] [46/97] cumulate libstdc++-devel-14.2.0-2.10 [ 25s] [47/97] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-2.7 [ 25s] [48/97] cumulate cpp-14.2.0-2.10 [ 25s] [49/97] cumulate gcc-c++-14.2.0-2.10 [ 25s] [50/97] cumulate binutils-libs-2.43-1.18 [ 25s] [51/97] cumulate coreutils-6.9-14.5 [ 25s] [52/97] cumulate gawk-3.1.5-1.2 [ 25s] [53/97] cumulate grep-2.5.2-1.11 [ 25s] [54/97] cumulate libacl-2.3.2-1.13 [ 25s] [55/97] cumulate libcc1-14.2.0-2.10 [ 25s] [56/97] cumulate libelf-0.189-1.17 [ 25s] [57/97] cumulate libmount-2.39.3-2.8 [ 25s] [58/97] cumulate make-4.4.1-1.12 [ 25s] [59/97] cumulate nss-certs-3.109-1.18 [ 25s] [60/97] cumulate smack-1.3.1-1.11 [ 25s] [61/97] cumulate bzip2-1.0.8-1.13 [ 25s] [62/97] cumulate libfdisk-2.39.3-2.8 [ 25s] [63/97] cumulate libmagic-5.45-1.11 [ 25s] [64/97] cumulate xz-5.8.1-1.5 [ 25s] [65/97] cumulate perl-5.38.0-1.14 [ 25s] [66/97] cumulate build-mkbaselibs-20120927-1.1 [ 25s] [67/97] cumulate linux-glibc-devel-6.6-1.18 [ 25s] [68/97] cumulate terminfo-base-full-6.4-1.18 [ 25s] [69/97] cumulate autoconf-2.71-1.18 [ 25s] [70/97] cumulate file-5.45-1.11 [ 25s] [71/97] cumulate glibc-locale-2.40-3.3 [ 25s] [72/97] cumulate tar-1.17-1.2 [ 25s] [73/97] cumulate binutils-2.43-1.18 [ 25s] [74/97] cumulate gzip-1.3.12-1.11 [ 25s] [75/97] cumulate pam-1.1.6-1.12 [ 25s] [76/97] cumulate tzdata-2024b-1.2 [ 25s] [77/97] cumulate libdw-0.189-1.17 [ 25s] [78/97] cumulate gcc-14.2.0-2.10 [ 25s] [79/97] cumulate libarchive-3.8.1-1.14 [ 25s] [80/97] cumulate qemu-accel-x86_64-armv7l-0.4-1.6 [ 25s] [81/97] cumulate automake-1.16.5-1.18 [ 25s] [82/97] cumulate libasm-0.189-1.17 [ 25s] [83/97] cumulate libncurses6-6.4-1.18 [ 25s] [84/97] cumulate build-20120927-1.1 [ 25s] [85/97] cumulate libncurses-6.4-1.18 [ 25s] [86/97] cumulate less-668-1.2 [ 25s] [87/97] cumulate libreadline-5.2-1.13 [ 25s] [88/97] cumulate libtool-2.4.7-1.18 [ 25s] [89/97] cumulate elfutils-0.189-1.17 [ 25s] [90/97] cumulate util-linux-2.39.3-2.8 [ 25s] [91/97] cumulate util-linux-su-2.39.3-2.8 [ 25s] [92/97] cumulate libxcrypt-devel-4.4.36-1.16 [ 25s] [93/97] cumulate nss-3.109-1.18 [ 25s] [94/97] cumulate glibc-devel-2.40-3.3 [ 25s] [95/97] cumulate libsoftokn3-3.109-1.18 [ 25s] [96/97] cumulate rpm-4.14.1.1-1.15 [ 25s] [97/97] cumulate rpm-build-4.14.1.1-1.15 [ 25s] now installing cumulated packages [ 26s] Preparing... ######################################## [ 26s] Updating / installing... [ 26s] setup-0.9-1.6 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 26s] ########################## [ 26s] filesystem-3.1-2.1 ######################################## [ 26s] libmagic-data-5.45-1.11 ######################################## [ 27s] glibc-2.40-3.3 ######################################## [ 27s] libgcc-14.2.0-2.10 ######################################## [ 27s] bash-3.2.57-1.2 ######################################## [ 27s] zlib-1.3.1-1.16 ######################################## [ 28s] coreutils-6.9-14.5 ######################################## [ 28s] libbz2-1.0.8-1.13 ######################################## [ 29s] libstdc++-14.2.0-2.10 ######################################## [ 30s] libelf-0.189-1.17 ######################################## [ 30s] liblzma-5.8.1-1.5 ######################################## [ 31s] libdw-0.189-1.17 ######################################## [ 31s] libxcrypt-4.4.36-1.16 ######################################## [ 31s] libmagic-5.45-1.11 ######################################## [ 32s] libblkid-2.39.3-2.8 ######################################## [ 32s] nspr-4.36-1.11 ######################################## [ 33s] pam-1.1.6-1.12 ######################################## [ 33s] libcap-2.73-1.13 ######################################## [ 34s] libfreebl3-3.109-1.18 ######################################## [ 34s] liblua-5.1.5-1.11 ######################################## [ 34s] libpopt-1.16-1.11 ######################################## [ 35s] libuuid-2.39.3-2.8 ######################################## [ 35s] libzstd1-1.5.6-1.14 ######################################## [ 36s] linux-glibc-devel-6.6-1.18 ######################################## [ 36s] terminfo-base-full-6.4-1.18 ######################################## [ 36s] libncurses6-6.4-1.18 ######################################## [ 37s] libreadline-5.2-1.13 ######################################## [ 37s] libfdisk-2.39.3-2.8 ######################################## [ 37s] nss-certs-3.109-1.18 ######################################## [ 37s] libmount-2.39.3-2.8 ######################################## [ 38s] libasm-0.189-1.17 ######################################## [ 38s] xz-5.8.1-1.5 ######################################## [ 38s] libcc1-14.2.0-2.10 ######################################## [ 38s] bzip2-1.0.8-1.13 ######################################## [ 38s] gzip-1.3.12-1.11 ######################################## [ 38s] binutils-libs-2.43-1.18 ######################################## [ 39s] binutils-2.43-1.18 ######################################## [ 39s] make-4.4.1-1.12 ######################################## [ 39s] findutils-4.3.8-1.12 ######################################## [ 39s] gdbm-1.8.3-1.18 ######################################## [ 42s] perl-5.38.0-1.14 ######################################## [ 42s] build-mkbaselibs-20120927-1.1 ######################################## [ 42s] libattr-2.5.1-1.13 ######################################## [ 43s] libacl-2.3.2-1.13 ######################################## [ 43s] tar-1.17-1.2 ######################################## [ 43s] libgfortran-14.2.0-2.10 ######################################## [ 43s] libgomp-14.2.0-2.10 ######################################## [ 44s] libitm-14.2.0-2.10 ######################################## [ 44s] libltdl-2.4.7-1.18 ######################################## [ 45s] libopenssl3-3.0.20-1.1 ######################################## [ 45s] libpcre-8.45-1.12 ######################################## [ 45s] libsmack-1.3.1-1.11 ######################################## [ 46s] libsmartcols-2.39.3-2.8 ######################################## [ 46s] libsqlite-3.50.2-1.12 ######################################## [ 46s] libsoftokn3-3.109-1.18 ######################################## [ 47s] nss-3.109-1.18 ######################################## [ 47s] libxml2-2.13.5-1.14 ######################################## [ 47s] libarchive-3.8.1-1.14 ######################################## [ 48s] rpm-4.14.1.1-1.15 ######################################## [ 48s] m4-1.4.19-1.2 ######################################## [ 48s] autoconf-2.71-1.18 ######################################## [ 48s] automake-1.16.5-1.18 ######################################## [ 49s] patch-2.7.6-1.11 ######################################## [ 49s] pkg-config-0.29.2-1.14 ######################################## [ 49s] libxcrypt-devel-4.4.36-1.16 ######################################## [ 49s] glibc-devel-2.40-3.3 ######################################## [ 49s] sed-4.1c-1.12 ######################################## [ 49s] util-linux-2.39.3-2.8 ######################################## [ 49s] libatomic-14.2.0-2.10 ######################################## [ 49s] libtool-2.4.7-1.18 ######################################## [ 50s] build-20120927-1.1 ######################################## [ 50s] libncurses-6.4-1.18 ######################################## [ 50s] libstdc++-devel-14.2.0-2.10 ######################################## [ 50s] build-compare-2023.06.18-1.7 ######################################## [ 50s] hal-rootstrap-checker-1.0.0-3.1 ######################################## [ 56s] qemu-linux-user-x86_64-cross-9.2.3.1-2######################################## [ 60s] gcc-14.2.0-2.10 ######################################## [ 78s] qemu-accel-x86_64-armv7l-0.4-1.6 ######################################## [ 79s] rpm-build-4.14.1.1-1.15 ######################################## [ 79s] util-linux-su-2.39.3-2.8 ######################################## [ 79s] smack-1.3.1-1.11 ######################################## [ 79s] grep-2.5.2-1.11 ######################################## [ 79s] elfutils-0.189-1.17 ######################################## [ 79s] less-668-1.2 ######################################## [ 79s] file-5.45-1.11 ######################################## [ 79s] glibc-locale-2.40-3.3 ######################################## [ 79s] tzdata-2024b-1.2 ######################################## [ 81s] cpp-14.2.0-2.10 ######################################## [ 82s] gcc-c++-14.2.0-2.10 ######################################## [ 82s] gawk-3.1.5-1.2 ######################################## [ 82s] cpio-2.8-1.2 ######################################## [ 82s] diffutils-3.10-1.2 ######################################## [ 82s] hostname-3.23-1.2 ######################################## [ 82s] net-tools-2.0_20121208git-1.11 ######################################## [ 82s] update-alternatives-1.22.2-1.2 ######################################## [ 82s] which-2.17-1.2 ######################################## [ 83s] now finalizing build dir... [ 84s] ----------------------------------------------------------------- [ 84s] I have the following modifications for libdbuspolicy-header.spec: [ 84s] 7c7 [ 84s] < Release: 0 [ 84s] --- [ 84s] > Release: 1.1 [ 85s] build target is armv7l-tizen-linux [ 85s] ----------------------------------------------------------------- [ 85s] ----- building libdbuspolicy-header.spec (user abuild) [ 85s] ----------------------------------------------------------------- [ 85s] ----------------------------------------------------------------- [ 85s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-10.0-Base-MR/standard/930bad33e3dd593632fb39675a69b13f-libdbuspolicy-header' /home/abuild/rpmbuild/SOURCES/libdbuspolicy-header.spec [ 85s] Building target platforms: armv7l-tizen-linux [ 85s] Building for target armv7l-tizen-linux [ 85s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.XUu7LK [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + rm -rf libdbuspolicy-header-1.2.0 [ 85s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/libdbuspolicy-header-1.2.0.tar.gz [ 85s] + /bin/tar -xof - [ 85s] + STATUS=0 [ 85s] + '[' 0 -ne 0 ']' [ 85s] + cd libdbuspolicy-header-1.2.0 [ 85s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 85s] + cp /home/abuild/rpmbuild/SOURCES/libdbuspolicy-header.manifest . [ 85s] + exit 0 [ 85s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.oG9FaR [ 85s] + umask 022 [ 85s] + cd /home/abuild/rpmbuild/BUILD [ 85s] + cd libdbuspolicy-header-1.2.0 [ 85s] + ref=/usr/lib/rpm [ 85s] + mints=0 [ 85s] + case $(uname -m) in [ 85s] ++ uname -m [ 85s] + for s in guess sub [ 85s] ++ find -maxdepth 8 -name config.guess [ 85s] + for s in guess sub [ 85s] ++ find -maxdepth 8 -name config.sub [ 85s] + LANG=C [ 85s] + export LANG [ 85s] + unset DISPLAY [ 85s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + LDFLAGS= [ 85s] + export LDFLAGS [ 85s] + AR=gcc-ar [ 85s] + export AR [ 85s] + NM=/bin/nm [ 85s] + export NM [ 85s] + RANLIB=gcc-ranlib [ 85s] + export RANLIB [ 85s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 85s] + export CFLAGS [ 85s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 85s] + export CXXFLAGS [ 85s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 85s] + export FFLAGS [ 85s] + autoreconf -v --install --force [ 87s] autoreconf: export WARNINGS= [ 87s] autoreconf: Entering directory '.' [ 87s] autoreconf: configure.ac: not using Gettext [ 88s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 89s] aclocal: warning: couldn't open directory 'm4': No such file or directory [ 95s] autoreconf: configure.ac: tracing [ 97s] autoreconf: configure.ac: creating directory build-aux [ 97s] autoreconf: running: libtoolize --copy --force [ 97s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 97s] libtoolize: copying file 'build-aux/ltmain.sh' [ 97s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 97s] libtoolize: copying file 'm4/libtool.m4' [ 97s] libtoolize: copying file 'm4/ltoptions.m4' [ 97s] libtoolize: copying file 'm4/ltsugar.m4' [ 97s] libtoolize: copying file 'm4/ltversion.m4' [ 97s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 97s] autoreconf: configure.ac: not using Intltool [ 97s] autoreconf: configure.ac: not using Gtkdoc [ 97s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 105s] autoreconf: running: /usr/bin/autoconf --force [ 106s] configure.ac:21: warning: The macro `AC_PROG_CC_STDC' is obsolete. [ 106s] configure.ac:21: You should run autoupdate. [ 106s] ./lib/autoconf/c.m4:1666: AC_PROG_CC_STDC is expanded from... [ 106s] configure.ac:21: the top level [ 109s] autoreconf: running: /usr/bin/autoheader --force [ 112s] autoreconf: running: automake --add-missing --copy --force-missing [ 116s] configure.ac:21: installing 'build-aux/compile' [ 116s] configure.ac:25: installing 'build-aux/config.guess' [ 116s] configure.ac:25: installing 'build-aux/config.sub' [ 116s] configure.ac:9: installing 'build-aux/install-sh' [ 116s] configure.ac:9: installing 'build-aux/missing' [ 116s] Makefile.am: installing 'build-aux/depcomp' [ 117s] autoreconf: Leaving directory '.' [ 117s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --libdir=/usr/lib [ 117s] checking for a BSD-compatible install... /bin/install -c [ 117s] checking whether build environment is sane... yes [ 117s] checking for a race-free mkdir -p... /bin/mkdir -p [ 117s] checking for gawk... gawk [ 117s] checking whether make sets $(MAKE)... yes [ 117s] checking whether make supports nested variables... yes [ 117s] checking how to create a pax tar archive... gnutar [ 117s] checking whether make supports the include directive... yes (GNU style) [ 117s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 118s] checking whether the C compiler works... yes [ 118s] checking for C compiler default output file name... a.out [ 118s] checking for suffix of executables... [ 118s] checking whether we are cross compiling... no [ 118s] checking for suffix of object files... o [ 118s] checking whether the compiler supports GNU C... yes [ 118s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 118s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 118s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 118s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 118s] checking for armv7l-tizen-linux-gnueabi-g++... armv7l-tizen-linux-gnueabi-g++ [ 119s] checking whether the compiler supports GNU C++... yes [ 119s] checking whether armv7l-tizen-linux-gnueabi-g++ accepts -g... yes [ 119s] checking for armv7l-tizen-linux-gnueabi-g++ option to enable C++11 features... none needed [ 119s] checking dependency style of armv7l-tizen-linux-gnueabi-g++... gcc3 [ 119s] checking whether make supports nested variables... (cached) yes [ 119s] checking build system type... armv7l-tizen-linux-gnueabi [ 119s] checking host system type... armv7l-tizen-linux-gnueabi [ 119s] checking how to print strings... printf [ 119s] checking for a sed that does not truncate output... /bin/sed [ 119s] checking for grep that handles long lines and -e... /bin/grep [ 119s] checking for egrep... /bin/grep -E [ 119s] checking for fgrep... /bin/grep -F [ 119s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 119s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 119s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 119s] checking the name lister (/bin/nm) interface... BSD nm [ 119s] checking whether ln -s works... yes [ 119s] checking the maximum length of command line arguments... 1572864 [ 120s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 120s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 120s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 120s] checking for armv7l-tizen-linux-gnueabi-file... no [ 120s] checking for file... file [ 120s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 120s] checking for objdump... objdump [ 120s] checking how to recognize dependent libraries... pass_all [ 120s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 120s] checking for dlltool... no [ 120s] checking how to associate runtime and link libraries... printf %s\n [ 120s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 120s] checking for archiver @FILE support... @ [ 120s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 120s] checking for strip... strip [ 120s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 120s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 120s] checking for sysroot... no [ 120s] checking for a working dd... /bin/dd [ 120s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 120s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 120s] checking for mt... no [ 120s] checking if : is a manifest tool... no [ 120s] checking for stdio.h... yes [ 120s] checking for stdlib.h... yes [ 120s] checking for string.h... yes [ 120s] checking for inttypes.h... yes [ 121s] checking for stdint.h... yes [ 121s] checking for strings.h... yes [ 121s] checking for sys/stat.h... yes [ 121s] checking for sys/types.h... yes [ 121s] checking for unistd.h... yes [ 121s] checking for dlfcn.h... yes [ 121s] checking for objdir... .libs [ 121s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 121s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 121s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 121s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 121s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 121s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 121s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 121s] checking whether -lc should be explicitly linked in... no [ 122s] checking dynamic linker characteristics... GNU/Linux ld.so [ 122s] checking how to hardcode library paths into programs... immediate [ 122s] checking whether stripping libraries is possible... yes [ 122s] checking if libtool supports shared libraries... yes [ 122s] checking whether to build shared libraries... yes [ 122s] checking whether to build static libraries... no [ 122s] checking how to run the C++ preprocessor... armv7l-tizen-linux-gnueabi-g++ -E [ 122s] checking for ld used by armv7l-tizen-linux-gnueabi-g++... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 122s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 122s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 122s] checking for armv7l-tizen-linux-gnueabi-g++ option to produce PIC... -fPIC -DPIC [ 122s] checking if armv7l-tizen-linux-gnueabi-g++ PIC flag -fPIC -DPIC works... yes [ 123s] checking if armv7l-tizen-linux-gnueabi-g++ static flag -static works... no [ 123s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... yes [ 123s] checking if armv7l-tizen-linux-gnueabi-g++ supports -c -o file.o... (cached) yes [ 123s] checking whether the armv7l-tizen-linux-gnueabi-g++ linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 123s] checking dynamic linker characteristics... (cached) GNU/Linux ld.so [ 123s] checking how to hardcode library paths into programs... immediate [ 123s] checking for a sed that does not truncate output... (cached) /bin/sed [ 123s] checking that generated files are newer than configure... done [ 123s] configure: creating ./config.status [ 125s] config.status: creating Makefile [ 125s] config.status: creating config.h [ 125s] config.status: executing depfiles commands [ 126s] config.status: executing libtool commands [ 126s] [ 126s] libdbuspolicy-header 1.2.0 [ 126s] ===== [ 126s] [ 126s] prefix: /usr [ 126s] libdir: /usr/lib [ 126s] includedir: /usr/include [ 126s] [ 126s] + make configure [ 126s] make: 'configure' is up to date. [ 126s] + make -j12 [ 126s] make --no-print-directory all-am [ 126s] GEN src/libdbuspolicy1.pc [ 126s] CXX src/libdbuspolicy1.lo [ 126s] CXXLD src/libdbuspolicy1.la [ 127s] + exit 0 [ 127s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.OJHm6p [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd libdbuspolicy-header-1.2.0 [ 127s] + LANG=C [ 127s] + export LANG [ 127s] + unset DISPLAY [ 127s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm [ 127s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm [ 127s] + make -j12 DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm install [ 127s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/pkgconfig' [ 127s] /bin/install -c -m 644 src/libdbuspolicy1.pc '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/pkgconfig' [ 127s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/libdbuspolicy-header' [ 127s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib' [ 127s] /bin/sh ./libtool --mode=install /bin/install -c src/libdbuspolicy1.la '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib' [ 127s] /bin/install -c -m 644 src/dbuspolicy1/libdbuspolicy1.h '/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/libdbuspolicy-header' [ 127s] libtool: install: /bin/install -c src/.libs/libdbuspolicy1.so.1.1.0 /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so.1.1.0 [ 127s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib && { ln -s -f libdbuspolicy1.so.1.1.0 libdbuspolicy1.so.1 || { rm -f libdbuspolicy1.so.1 && ln -s libdbuspolicy1.so.1.1.0 libdbuspolicy1.so.1; }; }) [ 127s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib && { ln -s -f libdbuspolicy1.so.1.1.0 libdbuspolicy1.so || { rm -f libdbuspolicy1.so && ln -s libdbuspolicy1.so.1.1.0 libdbuspolicy1.so; }; }) [ 127s] libtool: install: /bin/install -c src/.libs/libdbuspolicy1.lai /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.la [ 127s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 127s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.la [ 128s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so [ 128s] + cp src/.libs/libdbuspolicy1.so /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so [ 128s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so.1 /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so.1.1.0 [ 128s] + mkdir -p -m755 /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/dbuspolicy [ 128s] + install -m644 src/dbuspolicy1/libdbuspolicy1.h /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/dbuspolicy/ [ 128s] + mkdir -p -m755 /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/linux/ [ 128s] + install -m644 src/linux/kdbus.h /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/include/linux/ [ 128s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.0-1.1 --unique-debug-src-base libdbuspolicy-header-1.2.0-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libdbuspolicy-header-1.2.0 [ 128s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/lib/libdbuspolicy1.so [ 128s] 6 blocks [ 129s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libdbuspolicy-header-1.2.0/libdbuspolicy-header-debuginfo.manifest [ 129s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libdbuspolicy-header-1.2.0/libdbuspolicy-header-debugsource.manifest [ 129s] + /usr/lib/rpm/check-buildroot [ 129s] + /usr/lib/rpm//brp-compress [ 129s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 129s] + /usr/lib/rpm/brp-python-hardlink [ 129s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm [ 129s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libdbuspolicy-header-1.2.0/isu.list [ 129s] ~/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm ~/rpmbuild/BUILD/libdbuspolicy-header-1.2.0 [ 129s] ~/rpmbuild/BUILD/libdbuspolicy-header-1.2.0 [ 129s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm arm [ 129s] Package: libdbuspolicy-header, Group: Base/IPC [ 129s] # NOTICE: Config app-rootstrap-checker.yaml skipped # [ 129s] # NOTICE: Config hal-rootstrap-checker.yaml skipped # [ 129s] # NOTICE: Config web-plugin-rootstrap-checker.yaml skipped # [ 129s] ########################################################################################## [ 129s] # SUCCESS: hal-rootstrap-checker done # [ 129s] ########################################################################################## [ 129s] Processing files: libdbuspolicy-header-1.2.0-1.1.armv7l [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.jOhLFB [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd libdbuspolicy-header-1.2.0 [ 129s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header [ 129s] + export LC_ALL=C [ 129s] + LC_ALL=C [ 129s] + export LICENSEDIR [ 129s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header [ 129s] + cp -pr LICENSE.MIT /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header [ 129s] + exit 0 [ 129s] Provides: libdbuspolicy-header = 1.2.0-1.1 libdbuspolicy-header(armv7l-32) = 1.2.0-1.1 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Conflicts: libdbuspolicy [ 129s] Processing files: libdbuspolicy-header-debugsource-1.2.0-1.1.armv7l [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Provides: libdbuspolicy-header-debugsource = 1.2.0-1.1 libdbuspolicy-header-debugsource(armv7l-32) = 1.2.0-1.1 [ 129s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 129s] Processing files: libdbuspolicy-header-devel-1.2.0-1.1.armv7l [ 129s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 129s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 129s] [ 129s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.zPFeSb [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + cd libdbuspolicy-header-1.2.0 [ 129s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header-devel [ 129s] + export LC_ALL=C [ 129s] + LC_ALL=C [ 129s] + export LICENSEDIR [ 129s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header-devel [ 129s] + cp -pr LICENSE.MIT /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm/usr/share/licenses/libdbuspolicy-header-devel [ 129s] + exit 0 [ 130s] Provides: libdbuspolicy-header-devel = 1.2.0-1.1 libdbuspolicy-header-devel(armv7l-32) = 1.2.0-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: /usr/bin/pkg-config rtld(GNU_HASH) [ 130s] Processing files: libdbuspolicy-header-devel-debuginfo-1.2.0-1.1.armv7l [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Provides: libdbuspolicy-header-devel-debuginfo = 1.2.0-1.1 libdbuspolicy-header-devel-debuginfo(armv7l-32) = 1.2.0-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Recommends: libdbuspolicy-header-debugsource(armv7l-32) = 1.2.0-1.1 [ 130s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm [ 130s] Wrote: /home/abuild/rpmbuild/SRPMS/libdbuspolicy-header-1.2.0-1.1.src.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdbuspolicy-header-1.2.0-1.1.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdbuspolicy-header-debugsource-1.2.0-1.1.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdbuspolicy-header-devel-1.2.0-1.1.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libdbuspolicy-header-devel-debuginfo-1.2.0-1.1.armv7l.rpm [ 130s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.aLOYjr [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd libdbuspolicy-header-1.2.0 [ 130s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libdbuspolicy-header-1.2.0-1.1.arm [ 130s] + exit 0 [ 130s] ... checking for files with abuild user/group [ 130s] ... creating baselibs [ 131s] [ 131s] 27e631299862 finished "build libdbuspolicy-header.spec" at Wed May 6 12:11:31 UTC 2026. [ 131s]