[ 0s] Memory limit set to 71855042KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] 5ac50cf67b2c started "build libpciaccess.spec" at Thu Mar 28 13:21:21 UTC 2024. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-6.5-Base' repository 'standard' arch 'i586' srcmd5 'd4f55a0f31cd367faea6546b61610b8c' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/7/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.7/.build-srcdir/libpciaccess.spec build ... [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/36] preinstalling libmagic-data... [ 1s] [2/36] preinstalling libncurses... [ 2s] [3/36] preinstalling setup... [ 2s] [4/36] preinstalling filesystem... [ 2s] [5/36] preinstalling glibc... [ 2s] [6/36] preinstalling bash... [ 2s] [7/36] preinstalling diffutils... [ 2s] [8/36] preinstalling grep... [ 2s] [9/36] preinstalling libattr... [ 2s] [10/36] preinstalling libbz2... [ 2s] [11/36] preinstalling libcap... [ 2s] [12/36] preinstalling libfreebl3... [ 2s] [13/36] preinstalling libgcc... [ 2s] [14/36] preinstalling liblua... [ 2s] [15/36] preinstalling liblzma... [ 2s] [16/36] preinstalling libpopt... [ 2s] [17/36] preinstalling libreadline... [ 2s] [18/36] preinstalling libsmack... [ 2s] [19/36] preinstalling libsqlite... [ 2s] [20/36] preinstalling libzstd1... [ 3s] [21/36] preinstalling nspr... [ 3s] [22/36] preinstalling sed... [ 3s] [23/36] preinstalling zlib... [ 3s] [24/36] preinstalling coreutils... [ 3s] [25/36] preinstalling libacl... [ 3s] [26/36] preinstalling libelf... [ 3s] [27/36] preinstalling smack... [ 3s] [28/36] preinstalling bzip2... [ 3s] [29/36] preinstalling libmagic... [ 3s] [30/36] preinstalling libxml2... [ 3s] [31/36] preinstalling util-linux... [ 3s] [32/36] preinstalling tar... [ 3s] [33/36] preinstalling util-linux-su... [ 3s] [34/36] preinstalling nss... [ 3s] [35/36] preinstalling libsoftokn3... [ 3s] [36/36] preinstalling rpm... [ 4s] running setup postinstall script [ 4s] chroot: failed to run command '': No such file or directory [ 4s] initializing rpm db... [ 4s] reordering...cycle: libsoftokn3 -> nss [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] querying package ids... [ 5s] [1/95] cumulate libmagic-data-5.39-1.7 [ 5s] [2/95] cumulate setup-0.9-1.1 [ 5s] [3/95] cumulate filesystem-3.1-1.1 [ 5s] [4/95] cumulate glibc-2.30-1.8 [ 5s] [5/95] cumulate bash-3.2.57-1.1 [ 5s] [6/95] cumulate cpio-2.8-1.1 [ 5s] [7/95] cumulate diffutils-3.3-1.1 [ 5s] [8/95] cumulate findutils-4.3.8-1.7 [ 5s] [9/95] cumulate gdbm-1.8.3-1.8 [ 5s] [10/95] cumulate hostname-3.23-1.1 [ 5s] [11/95] cumulate libatomic-9.2.0-1.9 [ 5s] [12/95] cumulate libattr-2.4.48-1.7 [ 5s] [13/95] cumulate libblkid-2.36-1.3 [ 5s] [14/95] cumulate libbz2-1.0.8-1.8 [ 5s] [15/95] cumulate libcap-2.24-1.7 [ 5s] [16/95] cumulate libfreebl3-3.87-1.8 [ 5s] [17/95] cumulate libgcc-9.2.0-1.9 [ 5s] [18/95] cumulate libgomp-9.2.0-1.9 [ 5s] [19/95] cumulate libitm-9.2.0-1.9 [ 5s] [20/95] cumulate libltdl-2.4.2-1.8 [ 5s] [21/95] cumulate liblua-5.1.5-1.7 [ 5s] [22/95] cumulate liblzma-5.2.5-1.8 [ 5s] [23/95] cumulate libopenssl11-1.1.1t-1.8 [ 5s] [24/95] cumulate libpcre-8.44-1.3 [ 5s] [25/95] cumulate libpopt-1.16-1.7 [ 5s] [26/95] cumulate libquadmath-9.2.0-1.9 [ 5s] [27/95] cumulate libsmack-1.3.1-1.7 [ 5s] [28/95] cumulate libsmartcols-2.36-1.3 [ 5s] [29/95] cumulate libsqlite-3.33.0-1.7 [ 5s] [30/95] cumulate libuuid-2.36-1.3 [ 5s] [31/95] cumulate libzstd1-1.4.5-1.7 [ 5s] [32/95] cumulate m4-1.4.17-1.1 [ 5s] [33/95] cumulate net-tools-2.0_20121208git-1.1 [ 5s] [34/95] cumulate nspr-4.35-1.7 [ 5s] [35/95] cumulate patch-2.7-1.7 [ 5s] [36/95] cumulate pkg-config-0.28-1.8 [ 5s] [37/95] cumulate sed-4.1c-1.1 [ 5s] [38/95] cumulate update-alternatives-1.20.5-1.1 [ 5s] [39/95] cumulate which-2.17-1.1 [ 5s] [40/95] cumulate zlib-1.2.11-1.8 [ 5s] [41/95] cumulate build-compare-2015.04.28-1.2 [ 5s] [42/95] cumulate terminfo-base-full-6.2-1.8 [ 5s] [43/95] cumulate util-macros-1.19.0-1.1 [ 5s] [44/95] cumulate coreutils-6.9-14.2 [ 5s] [45/95] cumulate cpp-9.2.0-1.9 [ 5s] [46/95] cumulate gawk-3.1.5-1.1 [ 5s] [47/95] cumulate gcc-c++-9.2.0-1.9 [ 5s] [48/95] cumulate grep-2.5.2-1.1 [ 5s] [49/95] cumulate libacl-2.2.53-1.7 [ 5s] [50/95] cumulate libelf-0.178-1.8 [ 5s] [51/95] cumulate libmount-2.36-1.3 [ 5s] [52/95] cumulate libstdc++-9.2.0-1.9 [ 5s] [53/95] cumulate make-4.0-1.8 [ 5s] [54/95] cumulate nss-certs-3.87-1.8 [ 5s] [55/95] cumulate smack-1.3.1-1.7 [ 5s] [56/95] cumulate bzip2-1.0.8-1.8 [ 5s] [57/95] cumulate libfdisk-2.36-1.3 [ 5s] [58/95] cumulate libgfortran-9.2.0-1.9 [ 5s] [59/95] cumulate libmagic-5.39-1.7 [ 5s] [60/95] cumulate libxml2-2.9.12-1.8 [ 5s] [61/95] cumulate perl-5.32.0-1.7 [ 5s] [62/95] cumulate xz-5.2.5-1.8 [ 5s] [63/95] cumulate build-mkbaselibs-20120927-1.1 [ 5s] [64/95] cumulate libstdc++-devel-9.2.0-1.9 [ 5s] [65/95] cumulate file-5.39-1.7 [ 5s] [66/95] cumulate linux-glibc-devel-3.10-1.8 [ 5s] [67/95] cumulate tar-1.17-1.1 [ 5s] [68/95] cumulate autoconf-2.69-1.8 [ 5s] [69/95] cumulate binutils-2.33.1-1.8 [ 5s] [70/95] cumulate glibc-locale-2.30-1.8 [ 5s] [71/95] cumulate gzip-1.3.12-1.7 [ 5s] [72/95] cumulate libcc1-9.2.0-1.9 [ 5s] [73/95] cumulate libubsan-9.2.0-1.9 [ 5s] [74/95] cumulate pam-1.1.6-1.1 [ 5s] [75/95] cumulate libncurses6-6.2-1.8 [ 5s] [76/95] cumulate tzdata-2023c-1.1 [ 5s] [77/95] cumulate libdw-0.178-1.8 [ 5s] [78/95] cumulate libarchive-3.5.1-1.8 [ 5s] [79/95] cumulate libncurses-6.2-1.8 [ 5s] [80/95] cumulate glibc-devel-2.30-1.8 [ 5s] [81/95] cumulate less-466-1.1 [ 5s] [82/95] cumulate libreadline-5.2-1.8 [ 5s] [83/95] cumulate automake-1.15.1-1.8 [ 5s] [84/95] cumulate libasm-0.178-1.8 [ 5s] [85/95] cumulate build-20120927-1.1 [ 5s] [86/95] cumulate gcc-9.2.0-1.9 [ 5s] [87/95] cumulate zlib-devel-1.2.11-1.8 [ 5s] [88/95] cumulate libtool-2.4.2-1.8 [ 5s] [89/95] cumulate elfutils-0.178-1.8 [ 5s] [90/95] cumulate util-linux-2.36-1.3 [ 5s] [91/95] cumulate util-linux-su-2.36-1.3 [ 5s] [92/95] cumulate nss-3.87-1.8 [ 5s] [93/95] cumulate libsoftokn3-3.87-1.8 [ 5s] [94/95] cumulate rpm-4.14.1.1-1.8 [ 5s] [95/95] cumulate rpm-build-4.14.1.1-1.8 [ 5s] now installing cumulated packages [ 5s] Preparing... ######################################## [ 5s] Updating / installing... [ 5s] setup-0.9-1.1 ######################################## [ 5s] filesystem-3.1-1.1 ######################################## [ 5s] libmagic-data-5.39-1.7 ######################################## [ 5s] glibc-2.30-1.8 ######################################## [ 6s] bash-3.2.57-1.1 ######################################## [ 6s] zlib-1.2.11-1.8 ######################################## [ 6s] libbz2-1.0.8-1.8 ######################################## [ 6s] libgcc-9.2.0-1.9 ######################################## [ 6s] libstdc++-9.2.0-1.9 ######################################## [ 7s] liblzma-5.2.5-1.8 ######################################## [ 7s] libelf-0.178-1.8 ######################################## [ 7s] coreutils-6.9-14.2 ######################################## [ 7s] libdw-0.178-1.8 ######################################## [ 7s] libmagic-5.39-1.7 ######################################## [ 7s] libblkid-2.36-1.3 ######################################## [ 8s] nspr-4.35-1.7 ######################################## [ 8s] pam-1.1.6-1.1 ######################################## [ 9s] binutils-2.33.1-1.8 ######################################## [ 9s] libcap-2.24-1.7 ######################################## [ 9s] libfreebl3-3.87-1.8 ######################################## [ 9s] liblua-5.1.5-1.7 ######################################## [ 9s] libpopt-1.16-1.7 ######################################## [ 10s] libquadmath-9.2.0-1.9 ######################################## [ 10s] libuuid-2.36-1.3 ######################################## [ 10s] libzstd1-1.4.5-1.7 ######################################## [ 10s] pkg-config-0.28-1.8 ######################################## [ 10s] linux-glibc-devel-3.10-1.8 ######################################## [ 11s] terminfo-base-full-6.2-1.8 ######################################## [ 11s] libncurses6-6.2-1.8 ######################################## [ 11s] glibc-devel-2.30-1.8 ######################################## [ 11s] libreadline-5.2-1.8 ######################################## [ 12s] libfdisk-2.36-1.3 ######################################## [ 12s] libgfortran-9.2.0-1.9 ######################################## [ 12s] nss-certs-3.87-1.8 ######################################## [ 12s] libmount-2.36-1.3 ######################################## [ 12s] libasm-0.178-1.8 ######################################## [ 12s] gzip-1.3.12-1.7 ######################################## [ 12s] libxml2-2.9.12-1.8 ######################################## [ 13s] xz-5.2.5-1.8 ######################################## [ 13s] libcc1-9.2.0-1.9 ######################################## [ 13s] libubsan-9.2.0-1.9 ######################################## [ 13s] bzip2-1.0.8-1.8 ######################################## [ 13s] make-4.0-1.8 ######################################## [ 13s] findutils-4.3.8-1.7 ######################################## [ 13s] gdbm-1.8.3-1.8 ######################################## [ 17s] perl-5.32.0-1.7 ######################################## [ 17s] build-mkbaselibs-20120927-1.1 ######################################## [ 17s] libatomic-9.2.0-1.9 ######################################## [ 17s] libattr-2.4.48-1.7 ######################################## [ 17s] libacl-2.2.53-1.7 ######################################## [ 18s] tar-1.17-1.1 ######################################## [ 18s] libgomp-9.2.0-1.9 ######################################## [ 18s] libitm-9.2.0-1.9 ######################################## [ 20s] gcc-9.2.0-1.9 ######################################## [ 20s] libltdl-2.4.2-1.8 ######################################## [ 20s] libopenssl11-1.1.1t-1.8 ######################################## [ 20s] libarchive-3.5.1-1.8 ######################################## [ 20s] libpcre-8.44-1.3 ######################################## [ 21s] libsmack-1.3.1-1.7 ######################################## [ 21s] libsmartcols-2.36-1.3 ######################################## [ 21s] libsqlite-3.33.0-1.7 ######################################## [ 21s] libsoftokn3-3.87-1.8 ######################################## [ 22s] nss-3.87-1.8 ######################################## [ 22s] rpm-4.14.1.1-1.8 ######################################## [ 23s] m4-1.4.17-1.1 ######################################## [ 23s] autoconf-2.69-1.8 ######################################## [ 23s] automake-1.15.1-1.8 ######################################## [ 23s] patch-2.7-1.7 ######################################## [ 23s] sed-4.1c-1.1 ######################################## [ 23s] libtool-2.4.2-1.8 ######################################## [ 23s] build-20120927-1.1 ######################################## [ 23s] zlib-devel-1.2.11-1.8 ######################################## [ 23s] libncurses-6.2-1.8 ######################################## [ 23s] util-macros-1.19.0-1.1 ######################################## [ 24s] libstdc++-devel-9.2.0-1.9 ######################################## [ 24s] build-compare-2015.04.28-1.2 ######################################## [ 24s] util-linux-2.36-1.3 ######################################## [ 24s] util-linux-su-2.36-1.3 ######################################## [ 24s] rpm-build-4.14.1.1-1.8 ######################################## [ 24s] smack-1.3.1-1.7 ######################################## [ 24s] grep-2.5.2-1.1 ######################################## [ 24s] elfutils-0.178-1.8 ######################################## [ 24s] less-466-1.1 ######################################## [ 24s] file-5.39-1.7 ######################################## [ 25s] glibc-locale-2.30-1.8 ######################################## [ 25s] tzdata-2023c-1.1 ######################################## [ 26s] cpp-9.2.0-1.9 ######################################## [ 28s] gcc-c++-9.2.0-1.9 ######################################## [ 28s] gawk-3.1.5-1.1 ######################################## [ 28s] cpio-2.8-1.1 ######################################## [ 28s] diffutils-3.3-1.1 ######################################## [ 28s] hostname-3.23-1.1 ######################################## [ 28s] net-tools-2.0_20121208git-1.1 ######################################## [ 28s] update-alternatives-1.20.5-1.1 ######################################## [ 28s] which-2.17-1.1 ######################################## [ 28s] now finalizing build dir... [ 28s] ----------------------------------------------------------------- [ 28s] I have the following modifications for libpciaccess.spec: [ 28s] 6c6 [ 28s] < Release: 0 [ 28s] --- [ 28s] > Release: 1.1 [ 28s] 84a85 [ 28s] > %changelog [ 29s] build target is i686-tizen-linux [ 29s] ----------------------------------------------------------------- [ 29s] ----- building libpciaccess.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-6.5-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 29s] Building target platforms: i686-tizen-linux [ 29s] Building for target i686-tizen-linux [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.jClEYZ [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf libpciaccess-0.13.2 [ 29s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 29s] + /bin/tar -xof - [ 29s] + STATUS=0 [ 29s] + '[' 0 -ne 0 ']' [ 29s] + cd libpciaccess-0.13.2 [ 29s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 29s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 29s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 29s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 29s] patching file src/Makefile.am [ 29s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 29s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 29s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 29s] patching file src/common_bridge.c [ 29s] patching file src/linux_sysfs.c [ 29s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 29s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 29s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 29s] patching file src/linux_sysfs.c [ 29s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 29s] + exit 0 [ 29s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.5Ad9lY [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd libpciaccess-0.13.2 [ 29s] ++ uname -m [ 29s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 29s] + LANG=C [ 29s] + export LANG [ 29s] + unset DISPLAY [ 29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + LDFLAGS= [ 29s] + export LDFLAGS [ 29s] + NOCONFIGURE=1 [ 29s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 29s] + export CFLAGS [ 29s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 29s] + export CXXFLAGS [ 29s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 29s] + export FFLAGS [ 29s] + ./autogen.sh --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 29s] autoreconf: Entering directory `.' [ 29s] autoreconf: configure.ac: not using Gettext [ 30s] autoreconf: running: aclocal -I m4 [ 31s] autoreconf: configure.ac: tracing [ 32s] autoreconf: running: libtoolize --copy [ 32s] libtoolize: putting auxiliary files in `.'. [ 32s] libtoolize: copying file `./ltmain.sh' [ 32s] libtoolize: putting macros in `m4'. [ 32s] libtoolize: copying file `m4/libtool.m4' [ 32s] libtoolize: copying file `m4/ltoptions.m4' [ 32s] libtoolize: copying file `m4/ltsugar.m4' [ 32s] libtoolize: copying file `m4/ltversion.m4' [ 32s] libtoolize: copying file `m4/lt~obsolete.m4' [ 32s] libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and [ 32s] libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. [ 33s] autoreconf: running: /usr/bin/autoconf [ 34s] autoreconf: running: /usr/bin/autoheader [ 35s] autoreconf: running: automake --add-missing --copy --no-force [ 35s] configure.ac:33: installing './compile' [ 35s] configure.ac:36: installing './config.guess' [ 35s] configure.ac:36: installing './config.sub' [ 35s] configure.ac:32: installing './install-sh' [ 35s] configure.ac:32: installing './missing' [ 36s] scanpci/Makefile.am: installing './depcomp' [ 36s] autoreconf: Leaving directory `.' [ 36s] checking for a BSD-compatible install... /bin/install -c [ 36s] checking whether build environment is sane... yes [ 36s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 36s] checking for gawk... gawk [ 36s] checking whether make sets $(MAKE)... yes [ 36s] checking whether make supports nested variables... yes [ 36s] checking for style of include used by make... GNU [ 36s] checking for i686-tizen-linux-gnu-gcc... no [ 36s] checking for gcc... gcc [ 36s] checking whether the C compiler works... yes [ 36s] checking for C compiler default output file name... a.out [ 36s] checking for suffix of executables... [ 36s] checking whether we are cross compiling... no [ 36s] checking for suffix of object files... o [ 36s] checking whether we are using the GNU C compiler... yes [ 36s] checking whether gcc accepts -g... yes [ 36s] checking for gcc option to accept ISO C89... none needed [ 36s] checking whether gcc understands -c and -o together... yes [ 36s] checking dependency style of gcc... gcc3 [ 36s] checking how to run the C preprocessor... gcc -E [ 36s] checking for grep that handles long lines and -e... /bin/grep [ 36s] checking for egrep... /bin/grep -E [ 37s] checking for ANSI C header files... yes [ 37s] checking for sys/types.h... yes [ 37s] checking for sys/stat.h... yes [ 37s] checking for stdlib.h... yes [ 37s] checking for string.h... yes [ 37s] checking for memory.h... yes [ 37s] checking for strings.h... yes [ 37s] checking for inttypes.h... yes [ 37s] checking for stdint.h... yes [ 37s] checking for unistd.h... yes [ 37s] checking minix/config.h usability... no [ 37s] checking minix/config.h presence... no [ 37s] checking for minix/config.h... no [ 37s] checking whether it is safe to define __EXTENSIONS__... yes [ 37s] checking build system type... i686-tizen-linux-gnu [ 37s] checking host system type... i686-tizen-linux-gnu [ 37s] checking how to print strings... printf [ 38s] checking for a sed that does not truncate output... /bin/sed [ 38s] checking for fgrep... /bin/grep -F [ 38s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 38s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 38s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 38s] checking the name lister (/bin/nm -B) interface... BSD nm [ 38s] checking whether ln -s works... yes [ 38s] checking the maximum length of command line arguments... 1572864 [ 38s] checking whether the shell understands some XSI constructs... yes [ 38s] checking whether the shell understands "+="... yes [ 38s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 38s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 38s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 38s] checking for i686-tizen-linux-gnu-objdump... no [ 38s] checking for objdump... objdump [ 38s] checking how to recognize dependent libraries... pass_all [ 38s] checking for i686-tizen-linux-gnu-dlltool... no [ 38s] checking for dlltool... no [ 38s] checking how to associate runtime and link libraries... printf %s\n [ 38s] checking for i686-tizen-linux-gnu-ar... no [ 38s] checking for ar... ar [ 38s] checking for archiver @FILE support... @ [ 38s] checking for i686-tizen-linux-gnu-strip... no [ 38s] checking for strip... strip [ 38s] checking for i686-tizen-linux-gnu-ranlib... no [ 38s] checking for ranlib... ranlib [ 38s] checking command to parse /bin/nm -B output from gcc object... ok [ 38s] checking for sysroot... no [ 38s] checking for i686-tizen-linux-gnu-mt... no [ 38s] checking for mt... no [ 38s] checking if : is a manifest tool... no [ 38s] checking for dlfcn.h... yes [ 38s] checking for objdir... .libs [ 38s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 38s] checking for gcc option to produce PIC... -fPIC -DPIC [ 38s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 38s] checking if gcc static flag -static works... no [ 38s] checking if gcc supports -c -o file.o... yes [ 38s] checking if gcc supports -c -o file.o... (cached) yes [ 38s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 38s] checking whether -lc should be explicitly linked in... no [ 38s] checking dynamic linker characteristics... GNU/Linux ld.so [ 38s] checking how to hardcode library paths into programs... immediate [ 38s] checking whether stripping libraries is possible... yes [ 38s] checking if libtool supports shared libraries... yes [ 38s] checking whether to build shared libraries... yes [ 38s] checking whether to build static libraries... yes [ 38s] checking for gcc option to accept ISO C99... none needed [ 38s] checking whether __clang__ is declared... no [ 39s] checking whether __INTEL_COMPILER is declared... no [ 39s] checking whether __SUNPRO_C is declared... no [ 39s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 39s] checking pkg-config is at least version 0.9.0... yes [ 39s] checking if gcc supports -Werror=unknown-warning-option... no [ 39s] checking if gcc supports -Werror=unused-command-line-argument... no [ 39s] checking if gcc supports -Wall... yes [ 39s] checking if gcc supports -Wpointer-arith... yes [ 39s] checking if gcc supports -Wmissing-declarations... yes [ 39s] checking if gcc supports -Wformat=2... yes [ 39s] checking if gcc supports -Wstrict-prototypes... yes [ 39s] checking if gcc supports -Wmissing-prototypes... yes [ 39s] checking if gcc supports -Wnested-externs... yes [ 39s] checking if gcc supports -Wbad-function-cast... yes [ 39s] checking if gcc supports -Wold-style-definition... yes [ 39s] checking if gcc supports -Wdeclaration-after-statement... yes [ 39s] checking if gcc supports -Wunused... yes [ 39s] checking if gcc supports -Wuninitialized... yes [ 39s] checking if gcc supports -Wshadow... yes [ 39s] checking if gcc supports -Wmissing-noreturn... yes [ 39s] checking if gcc supports -Wmissing-format-attribute... yes [ 39s] checking if gcc supports -Wredundant-decls... yes [ 39s] checking if gcc supports -Wlogical-op... yes [ 40s] checking if gcc supports -Werror=implicit... yes [ 40s] checking if gcc supports -Werror=nonnull... yes [ 40s] checking if gcc supports -Werror=init-self... yes [ 40s] checking if gcc supports -Werror=main... yes [ 40s] checking if gcc supports -Werror=missing-braces... yes [ 40s] checking if gcc supports -Werror=sequence-point... yes [ 40s] checking if gcc supports -Werror=return-type... yes [ 40s] checking if gcc supports -Werror=trigraphs... yes [ 40s] checking if gcc supports -Werror=array-bounds... yes [ 40s] checking if gcc supports -Werror=write-strings... yes [ 40s] checking if gcc supports -Werror=address... yes [ 40s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 40s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 40s] checking if gcc supports -pedantic... yes [ 40s] checking if gcc supports -Werror... yes [ 40s] checking if gcc supports -Werror=attributes... yes [ 40s] checking whether make supports nested variables... (cached) yes [ 40s] checking for special C compiler options needed for large files... no [ 40s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 40s] checking err.h usability... yes [ 40s] checking err.h presence... yes [ 40s] checking for err.h... yes [ 41s] checking asm/mtrr.h usability... yes [ 41s] checking asm/mtrr.h presence... yes [ 41s] checking for asm/mtrr.h... yes [ 41s] checking for struct pci_io.pi_sel.pc_domain... no [ 41s] checking that generated files are newer than configure... done [ 41s] configure: creating ./config.status [ 41s] config.status: creating Makefile [ 41s] config.status: creating include/Makefile [ 41s] config.status: creating man/Makefile [ 41s] config.status: creating src/Makefile [ 41s] config.status: creating scanpci/Makefile [ 41s] config.status: creating pciaccess.pc [ 41s] config.status: creating config.h [ 41s] config.status: executing depfiles commands [ 41s] config.status: executing libtool commands [ 41s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 41s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -w' [ 41s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 41s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 41s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector -fmessage-length=0 -Wl,--as-needed' [ 41s] + export CFLAGS [ 41s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 41s] + export CXXFLAGS [ 41s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 41s] + export FFLAGS [ 41s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 42s] checking for a BSD-compatible install... /bin/install -c [ 42s] checking whether build environment is sane... yes [ 42s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 42s] checking for gawk... gawk [ 42s] checking whether make sets $(MAKE)... yes [ 42s] checking whether make supports nested variables... yes [ 42s] checking for style of include used by make... GNU [ 42s] checking for i686-tizen-linux-gnu-gcc... no [ 42s] checking for gcc... gcc [ 42s] checking whether the C compiler works... yes [ 42s] checking for C compiler default output file name... a.out [ 42s] checking for suffix of executables... [ 42s] checking whether we are cross compiling... no [ 42s] checking for suffix of object files... o [ 42s] checking whether we are using the GNU C compiler... yes [ 42s] checking whether gcc accepts -g... yes [ 42s] checking for gcc option to accept ISO C89... none needed [ 42s] checking whether gcc understands -c and -o together... yes [ 42s] checking dependency style of gcc... gcc3 [ 42s] checking how to run the C preprocessor... gcc -E [ 42s] checking for grep that handles long lines and -e... /bin/grep [ 42s] checking for egrep... /bin/grep -E [ 42s] checking for ANSI C header files... yes [ 42s] checking for sys/types.h... yes [ 42s] checking for sys/stat.h... yes [ 42s] checking for stdlib.h... yes [ 42s] checking for string.h... yes [ 42s] checking for memory.h... yes [ 42s] checking for strings.h... yes [ 42s] checking for inttypes.h... yes [ 42s] checking for stdint.h... yes [ 42s] checking for unistd.h... yes [ 42s] checking minix/config.h usability... no [ 43s] checking minix/config.h presence... no [ 43s] checking for minix/config.h... no [ 43s] checking whether it is safe to define __EXTENSIONS__... yes [ 43s] checking build system type... i686-tizen-linux-gnu [ 43s] checking host system type... i686-tizen-linux-gnu [ 43s] checking how to print strings... printf [ 43s] checking for a sed that does not truncate output... /bin/sed [ 43s] checking for fgrep... /bin/grep -F [ 43s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 43s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 43s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 43s] checking the name lister (/bin/nm -B) interface... BSD nm [ 43s] checking whether ln -s works... yes [ 43s] checking the maximum length of command line arguments... 1572864 [ 43s] checking whether the shell understands some XSI constructs... yes [ 43s] checking whether the shell understands "+="... yes [ 43s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 43s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 43s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 43s] checking for i686-tizen-linux-gnu-objdump... no [ 43s] checking for objdump... objdump [ 43s] checking how to recognize dependent libraries... pass_all [ 43s] checking for i686-tizen-linux-gnu-dlltool... no [ 43s] checking for dlltool... no [ 43s] checking how to associate runtime and link libraries... printf %s\n [ 43s] checking for i686-tizen-linux-gnu-ar... no [ 43s] checking for ar... ar [ 43s] checking for archiver @FILE support... @ [ 43s] checking for i686-tizen-linux-gnu-strip... no [ 43s] checking for strip... strip [ 43s] checking for i686-tizen-linux-gnu-ranlib... no [ 43s] checking for ranlib... ranlib [ 43s] checking command to parse /bin/nm -B output from gcc object... ok [ 43s] checking for sysroot... no [ 43s] checking for i686-tizen-linux-gnu-mt... no [ 43s] checking for mt... no [ 43s] checking if : is a manifest tool... no [ 43s] checking for dlfcn.h... yes [ 43s] checking for objdir... .libs [ 43s] checking if gcc supports -fno-rtti -fno-exceptions... yes [ 43s] checking for gcc option to produce PIC... -fPIC -DPIC [ 43s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 43s] checking if gcc static flag -static works... no [ 43s] checking if gcc supports -c -o file.o... yes [ 43s] checking if gcc supports -c -o file.o... (cached) yes [ 43s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 43s] checking whether -lc should be explicitly linked in... no [ 43s] checking dynamic linker characteristics... GNU/Linux ld.so [ 43s] checking how to hardcode library paths into programs... immediate [ 43s] checking whether stripping libraries is possible... yes [ 43s] checking if libtool supports shared libraries... yes [ 43s] checking whether to build shared libraries... yes [ 43s] checking whether to build static libraries... no [ 43s] checking for gcc option to accept ISO C99... none needed [ 43s] checking whether __clang__ is declared... no [ 43s] checking whether __INTEL_COMPILER is declared... no [ 43s] checking whether __SUNPRO_C is declared... no [ 43s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 43s] checking pkg-config is at least version 0.9.0... yes [ 43s] checking if gcc supports -Werror=unknown-warning-option... no [ 43s] checking if gcc supports -Werror=unused-command-line-argument... no [ 43s] checking if gcc supports -Wall... yes [ 43s] checking if gcc supports -Wpointer-arith... yes [ 43s] checking if gcc supports -Wmissing-declarations... yes [ 43s] checking if gcc supports -Wformat=2... yes [ 43s] checking if gcc supports -Wstrict-prototypes... yes [ 43s] checking if gcc supports -Wmissing-prototypes... yes [ 43s] checking if gcc supports -Wnested-externs... yes [ 43s] checking if gcc supports -Wbad-function-cast... yes [ 43s] checking if gcc supports -Wold-style-definition... yes [ 44s] checking if gcc supports -Wdeclaration-after-statement... yes [ 44s] checking if gcc supports -Wunused... yes [ 44s] checking if gcc supports -Wuninitialized... yes [ 44s] checking if gcc supports -Wshadow... yes [ 44s] checking if gcc supports -Wmissing-noreturn... yes [ 44s] checking if gcc supports -Wmissing-format-attribute... yes [ 44s] checking if gcc supports -Wredundant-decls... yes [ 44s] checking if gcc supports -Wlogical-op... yes [ 44s] checking if gcc supports -Werror=implicit... yes [ 44s] checking if gcc supports -Werror=nonnull... yes [ 44s] checking if gcc supports -Werror=init-self... yes [ 44s] checking if gcc supports -Werror=main... yes [ 44s] checking if gcc supports -Werror=missing-braces... yes [ 44s] checking if gcc supports -Werror=sequence-point... yes [ 44s] checking if gcc supports -Werror=return-type... yes [ 44s] checking if gcc supports -Werror=trigraphs... yes [ 44s] checking if gcc supports -Werror=array-bounds... yes [ 44s] checking if gcc supports -Werror=write-strings... yes [ 44s] checking if gcc supports -Werror=address... yes [ 44s] checking if gcc supports -Werror=int-to-pointer-cast... yes [ 44s] checking if gcc supports -Werror=pointer-to-int-cast... yes [ 44s] checking if gcc supports -pedantic... yes [ 45s] checking if gcc supports -Werror... yes [ 45s] checking if gcc supports -Werror=attributes... yes [ 45s] checking whether make supports nested variables... (cached) yes [ 45s] checking for gzopen in -lz... yes [ 45s] checking zlib.h usability... yes [ 45s] checking zlib.h presence... yes [ 45s] checking for zlib.h... yes [ 45s] checking for special C compiler options needed for large files... no [ 45s] checking for _FILE_OFFSET_BITS value needed for large files... 64 [ 45s] checking err.h usability... yes [ 45s] checking err.h presence... yes [ 45s] checking for err.h... yes [ 45s] checking asm/mtrr.h usability... yes [ 45s] checking asm/mtrr.h presence... yes [ 45s] checking for asm/mtrr.h... yes [ 45s] checking for struct pci_io.pi_sel.pc_domain... no [ 45s] checking that generated files are newer than configure... done [ 45s] configure: creating ./config.status [ 46s] config.status: creating Makefile [ 46s] config.status: creating include/Makefile [ 46s] config.status: creating man/Makefile [ 46s] config.status: creating src/Makefile [ 46s] config.status: creating scanpci/Makefile [ 46s] config.status: creating pciaccess.pc [ 46s] config.status: creating config.h [ 46s] config.status: executing depfiles commands [ 46s] config.status: executing libtool commands [ 46s] + make -j12 [ 46s] make all-recursive [ 46s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 46s] Making all in include [ 46s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 46s] make[2]: Nothing to be done for 'all'. [ 46s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 46s] Making all in man [ 46s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 46s] GEN scanpci.1 [ 46s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 46s] Making all in src [ 46s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 46s] CC common_bridge.lo [ 46s] CC common_iterator.lo [ 46s] CC common_init.lo [ 46s] CC common_interface.lo [ 46s] CC common_io.lo [ 46s] CC common_capability.lo [ 46s] CC common_device_name.lo [ 46s] CC common_map.lo [ 46s] CC common_vgaarb.lo [ 46s] CC linux_sysfs.lo [ 46s] CC linux_devmem.lo [ 47s] CCLD libpciaccess.la [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 47s] Making all in scanpci [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] CC scanpci.o [ 47s] CCLD scanpci [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] + exit 0 [ 47s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.WaEJnX [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd libpciaccess-0.13.2 [ 47s] + LANG=C [ 47s] + export LANG [ 47s] + unset DISPLAY [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 47s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 47s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 install [ 47s] Making install in include [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 47s] make[2]: Nothing to be done for 'install-exec-am'. [ 47s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/include' [ 47s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/include' [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 47s] Making install in man [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 47s] make[2]: Nothing to be done for 'install-exec-am'. [ 47s] make[2]: Nothing to be done for 'install-data-am'. [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 47s] Making install in src [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 47s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib' [ 47s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib' [ 47s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2 [ 47s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 47s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 47s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.la [ 47s] libtool: install: warning: remember to run `libtool --finish /usr/lib' [ 47s] make[2]: Nothing to be done for 'install-data-am'. [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 47s] Making install in scanpci [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] make[2]: Nothing to be done for 'install-exec-am'. [ 47s] make[2]: Nothing to be done for 'install-data-am'. [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 47s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] make[2]: Nothing to be done for 'install-exec-am'. [ 47s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/pkgconfig' [ 47s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/pkgconfig' [ 47s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 47s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/info/dir [ 47s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*\.la$' [ 47s] + xargs rm -f -- [ 47s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*\.a$' [ 47s] + xargs rm -f -- [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/info [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/packages [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/libpciaccess [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc/libpciaccess-0.13.2 [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/gtk-doc [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/doc [ 47s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/man [ 47s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/man./.*.[0-9]' [ 47s] + xargs rm -f -- [ 47s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/../man./.*.[0-9]' [ 47s] + xargs rm -f -- [ 47s] + xargs rm -f -- [ 47s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 -regex '.*/man/man./.*.[0-9]pm' [ 47s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 47s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/lib/libpciaccess.so.0.13.2 [ 47s] 235 blocks [ 47s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 47s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 47s] + /usr/lib/rpm/check-buildroot [ 47s] + /usr/lib/rpm//brp-compress [ 47s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 47s] + /usr/lib/rpm/brp-python-hardlink [ 47s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 47s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 47s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 47s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 47s] Processing files: libpciaccess-0.13.2-1.1.i686 [ 47s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 47s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 47s] [ 47s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.3T98oW [ 47s] + umask 022 [ 47s] + cd /home/abuild/rpmbuild/BUILD [ 47s] + cd libpciaccess-0.13.2 [ 47s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 47s] + export LC_ALL=C [ 47s] + LC_ALL=C [ 47s] + export LICENSEDIR [ 47s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 47s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess [ 47s] + exit 0 [ 48s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(x86-32) = 0.13.2-1.1 libpciaccess.so.0 [ 48s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 48s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 48s] Requires(post): /sbin/ldconfig [ 48s] Requires(postun): /sbin/ldconfig [ 48s] Requires: libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 48s] Processing files: libpciaccess-debugsource-0.13.2-1.1.i686 [ 48s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 48s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 48s] [ 48s] Provides: libpciaccess-debugsource = 0.13.2-1.1 libpciaccess-debugsource(x86-32) = 0.13.2-1.1 [ 48s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 48s] Processing files: libpciaccess-devel-0.13.2-1.1.i686 [ 48s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 48s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 48s] [ 48s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.NiqB3Z [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd libpciaccess-0.13.2 [ 48s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 48s] + export LC_ALL=C [ 48s] + LC_ALL=C [ 48s] + export LICENSEDIR [ 48s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 48s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386/usr/share/licenses/libpciaccess-devel [ 48s] + exit 0 [ 48s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(x86-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 48s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 48s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 48s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.i686 [ 48s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 48s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 48s] [ 48s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(x86-32) = 0.13.2-1.1 [ 48s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 48s] Recommends: libpciaccess-debugsource(x86-32) = 0.13.2-1.1 [ 48s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 48s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 48s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-0.13.2-1.1.i686.rpm [ 48s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debugsource-0.13.2-1.1.i686.rpm [ 48s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-devel-0.13.2-1.1.i686.rpm [ 48s] XZ: Adjusted the number of threads from 48 to 21 to not exceed the memory usage limit of 3758096381 bytesWrote: /home/abuild/rpmbuild/RPMS/i686/libpciaccess-debuginfo-0.13.2-1.1.i686.rpm [ 48s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.vioQTX [ 48s] + umask 022 [ 48s] + cd /home/abuild/rpmbuild/BUILD [ 48s] + cd libpciaccess-0.13.2 [ 48s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.i386 [ 48s] + exit 0 [ 48s] ... checking for files with abuild user/group [ 48s] ... creating baselibs [ 48s] libpciaccess(x86_64:32bit): writing specfile... [ 48s] libpciaccess(x86_64:32bit): running build... [ 49s] libpciaccess-debuginfo(x86_64:32bit): writing specfile... [ 49s] libpciaccess-debuginfo(x86_64:32bit): running build... [ 49s] [ 49s] 5ac50cf67b2c finished "build libpciaccess.spec" at Thu Mar 28 13:22:10 UTC 2024. [ 49s] Retried build at Thu Mar 28 14:13:58 2024 returned same result, skipped Retried build at Fri Mar 29 04:54:24 2024 returned same result, skipped Retried build at Thu Nov 28 02:36:41 2024 returned same result, skipped