[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 612cb55fbcfc started "build xmlsec1.spec" at Tue May 13 04:06:20 UTC 2025. [ 0s] [ 0s] Building xmlsec1 for project 'Tizen-7.0-Base' repository 'standard' arch 'aarch64' srcmd5 'c8a36b5cbbe5c1da86561c747b78249e' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/xmlsec1.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/xmlsec1.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/24/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.24/.build-srcdir/xmlsec1.spec build ... [ 1s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/41] preinstalling libmagic-data... [ 3s] [2/41] preinstalling libncurses... [ 3s] [3/41] preinstalling setup... [ 3s] [4/41] preinstalling filesystem... [ 3s] [5/41] preinstalling glibc... [ 3s] [6/41] preinstalling bash... [ 4s] [7/41] preinstalling diffutils... [ 4s] [8/41] preinstalling grep... [ 4s] [9/41] preinstalling libattr... [ 4s] [10/41] preinstalling libblkid... [ 4s] [11/41] preinstalling libbz2... [ 4s] [12/41] preinstalling libcap... [ 4s] [13/41] preinstalling libfreebl3... [ 4s] [14/41] preinstalling libgcc... [ 4s] [15/41] preinstalling liblua... [ 4s] [16/41] preinstalling liblzma... [ 4s] [17/41] preinstalling libpopt... [ 4s] [18/41] preinstalling libreadline... [ 5s] [19/41] preinstalling libsmack... [ 5s] [20/41] preinstalling libsqlite... [ 5s] [21/41] preinstalling libuuid... [ 5s] [22/41] preinstalling libzstd1... [ 5s] [23/41] preinstalling nspr... [ 5s] [24/41] preinstalling sed... [ 5s] [25/41] preinstalling zlib... [ 5s] [26/41] preinstalling qemu-accel-x86_64-aarch64... [ 17s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 21s] [28/41] preinstalling coreutils... [ 22s] [29/41] preinstalling libacl... [ 22s] [30/41] preinstalling libelf... [ 22s] [31/41] preinstalling libmount... [ 22s] [32/41] preinstalling smack... [ 22s] [33/41] preinstalling bzip2... [ 23s] [34/41] preinstalling libmagic... [ 23s] [35/41] preinstalling libxml2... [ 23s] [36/41] preinstalling tar... [ 23s] [37/41] preinstalling util-linux... [ 24s] [38/41] preinstalling util-linux-su... [ 24s] [39/41] preinstalling nss... [ 24s] [40/41] preinstalling libsoftokn3... [ 24s] [41/41] preinstalling rpm... [ 25s] running qemu-linux-user-x86_64-cross postinstall script [ 26s] running qemu-accel-x86_64-aarch64 postinstall script [ 26s] running setup postinstall script [ 26s] chroot: failed to run command '': No such file or directory [ 26s] initializing rpm db... [ 26s] reordering...cycle: libsoftokn3 -> nss [ 26s] breaking dependency nss -> libsoftokn3 [ 27s] done [ 27s] querying package ids... [ 28s] [1/109] cumulate libmagic-data-5.41-1.16 [ 28s] [2/109] cumulate setup-0.9-1.9 [ 28s] [3/109] cumulate filesystem-3.1-1.1 [ 28s] [4/109] cumulate glibc-2.30-1.23 [ 28s] [5/109] cumulate bash-3.2.57-1.1 [ 28s] [6/109] cumulate cpio-2.8-1.1 [ 28s] [7/109] cumulate diffutils-3.3-1.1 [ 28s] [8/109] cumulate fdupes-2.1.2-1.18 [ 28s] [9/109] cumulate findutils-4.3.8-1.17 [ 28s] [10/109] cumulate gdbm-1.8.3-1.24 [ 28s] [11/109] cumulate hostname-3.23-1.1 [ 28s] [12/109] cumulate libatomic-9.2.0-1.21 [ 28s] [13/109] cumulate libattr-2.5.1-1.19 [ 28s] [14/109] cumulate libblkid-2.37.4-2.6 [ 28s] [15/109] cumulate libbz2-1.0.8-1.17 [ 28s] [16/109] cumulate libcap-2.24-1.16 [ 28s] [17/109] cumulate libfreebl3-3.98-1.12 [ 28s] [18/109] cumulate libgcc-9.2.0-1.21 [ 28s] [19/109] cumulate libgomp-9.2.0-1.21 [ 28s] [20/109] cumulate libgpg-error-1.43-1.1 [ 28s] [21/109] cumulate libitm-9.2.0-1.21 [ 28s] [22/109] cumulate libltdl-2.4.6-1.23 [ 28s] [23/109] cumulate liblua-5.1.5-1.18 [ 28s] [24/109] cumulate liblzma-5.2.5-1.23 [ 28s] [25/109] cumulate libopenssl11-1.1.1w-1.6 [ 28s] [26/109] cumulate libpcre-8.45-1.8 [ 28s] [27/109] cumulate libpopt-1.16-1.16 [ 28s] [28/109] cumulate libsmack-1.3.1-1.16 [ 28s] [29/109] cumulate libsmartcols-2.37.4-2.6 [ 28s] [30/109] cumulate libsqlite-3.39.0-1.17 [ 28s] [31/109] cumulate libuuid-2.37.4-2.6 [ 28s] [32/109] cumulate libzstd1-1.4.5-1.19 [ 28s] [33/109] cumulate m4-1.4.19-1.1 [ 28s] [34/109] cumulate net-tools-2.0_20121208git-1.7 [ 28s] [35/109] cumulate nspr-4.35-1.16 [ 28s] [36/109] cumulate patch-2.7.6-1.16 [ 28s] [37/109] cumulate pkg-config-0.29.2-1.18 [ 28s] [38/109] cumulate sed-4.1c-1.1 [ 28s] [39/109] cumulate update-alternatives-1.21.18-1.1 [ 28s] [40/109] cumulate which-2.17-1.1 [ 28s] [41/109] cumulate zlib-1.3-1.7 [ 28s] [42/109] cumulate build-compare-2015.04.28-1.12 [ 28s] [43/109] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.13 [ 28s] [44/109] cumulate terminfo-base-full-6.2-1.24 [ 28s] [45/109] cumulate coreutils-6.9-14.12 [ 28s] [46/109] cumulate cpp-9.2.0-1.21 [ 28s] [47/109] cumulate gawk-3.1.5-1.1 [ 28s] [48/109] cumulate gcc-c++-9.2.0-1.21 [ 28s] [49/109] cumulate grep-2.5.2-1.1 [ 28s] [50/109] cumulate libacl-2.2.53-1.18 [ 28s] [51/109] cumulate libelf-0.178-1.24 [ 28s] [52/109] cumulate libgcrypt-1.10.1-1.1 [ 28s] [53/109] cumulate libgfortran-9.2.0-1.21 [ 28s] [54/109] cumulate libmount-2.37.4-2.6 [ 28s] [55/109] cumulate libstdc++-9.2.0-1.21 [ 28s] [56/109] cumulate make-4.3-1.16 [ 28s] [57/109] cumulate nss-certs-3.98-1.12 [ 28s] [58/109] cumulate smack-1.3.1-1.16 [ 28s] [59/109] cumulate xz-devel-5.2.5-1.23 [ 28s] [60/109] cumulate bzip2-1.0.8-1.17 [ 28s] [61/109] cumulate libfdisk-2.37.4-2.6 [ 28s] [62/109] cumulate libmagic-5.41-1.16 [ 28s] [63/109] cumulate libxml2-2.10.2-1.17 [ 28s] [64/109] cumulate perl-5.34.0-1.17 [ 28s] [65/109] cumulate xz-5.2.5-1.23 [ 28s] [66/109] cumulate build-mkbaselibs-20120927-1.1 [ 28s] [67/109] cumulate libstdc++-devel-9.2.0-1.21 [ 28s] [68/109] cumulate file-5.41-1.16 [ 28s] [69/109] cumulate linux-glibc-devel-3.10-1.22 [ 28s] [70/109] cumulate tar-1.17-1.1 [ 28s] [71/109] cumulate autoconf-2.71-1.22 [ 28s] [72/109] cumulate binutils-2.33.1-1.23 [ 28s] [73/109] cumulate glibc-locale-2.30-1.23 [ 28s] [74/109] cumulate gzip-1.3.12-1.16 [ 28s] [75/109] cumulate libcc1-9.2.0-1.21 [ 28s] [76/109] cumulate libubsan-9.2.0-1.21 [ 28s] [77/109] cumulate pam-1.1.6-3.2 [ 28s] [78/109] cumulate libncurses6-6.2-1.24 [ 28s] [79/109] cumulate tzdata-2023c-1.1 [ 28s] [80/109] cumulate libdw-0.178-1.24 [ 28s] [81/109] cumulate libxslt-1.1.37-1.1 [ 28s] [82/109] cumulate libarchive-3.7.7-2.1 [ 28s] [83/109] cumulate libncurses-6.2-1.24 [ 28s] [84/109] cumulate glibc-devel-2.30-1.23 [ 28s] [85/109] cumulate less-466-1.1 [ 28s] [86/109] cumulate libreadline-5.2-1.18 [ 28s] [87/109] cumulate automake-1.16.4-1.21 [ 28s] [88/109] cumulate libasm-0.178-1.24 [ 28s] [89/109] cumulate libxslt-tools-1.1.37-1.1 [ 28s] [90/109] cumulate ncurses-devel-6.2-1.24 [ 28s] [91/109] cumulate build-20120927-1.1 [ 28s] [92/109] cumulate gcc-9.2.0-1.21 [ 28s] [93/109] cumulate qemu-accel-x86_64-aarch64-0.4-2.10 [ 28s] [94/109] cumulate readline-devel-5.2-1.18 [ 28s] [95/109] cumulate libxml2-tools-2.10.2-1.17 [ 28s] [96/109] cumulate zlib-devel-1.3-1.7 [ 28s] [97/109] cumulate libtool-2.4.6-1.23 [ 28s] [98/109] cumulate libgpg-error-devel-1.43-1.1 [ 28s] [99/109] cumulate elfutils-0.178-1.24 [ 28s] [100/109] cumulate util-linux-2.37.4-2.6 [ 28s] [101/109] cumulate libopenssl1.1-devel-1.1.1w-1.6 [ 28s] [102/109] cumulate util-linux-su-2.37.4-2.6 [ 28s] [103/109] cumulate libgcrypt-devel-1.10.1-1.1 [ 28s] [104/109] cumulate libxml2-devel-2.10.2-1.17 [ 28s] [105/109] cumulate libxslt-devel-1.1.37-1.1 [ 28s] [106/109] cumulate nss-3.98-1.12 [ 28s] [107/109] cumulate libsoftokn3-3.98-1.12 [ 28s] [108/109] cumulate rpm-4.14.1.1-2.12 [ 28s] [109/109] cumulate rpm-build-4.14.1.1-2.12 [ 28s] now installing cumulated packages [ 30s] Preparing... ######################################## [ 30s] Updating / installing... [ 30s] setup-0.9-1.9 ######################################## [ 30s] filesystem-3.1-1.1 ######################################## [ 30s] glibc-2.30-1.23 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 30s] ######################################## [ 31s] bash-3.2.57-1.1 ######################################## [ 31s] zlib-1.3-1.7 ######################################## [ 31s] liblzma-5.2.5-1.23 ######################################## [ 32s] pkg-config-0.29.2-1.18 ######################################## [ 32s] libgcc-9.2.0-1.21 ######################################## [ 32s] libstdc++-9.2.0-1.21 ######################################## [ 33s] libbz2-1.0.8-1.17 ######################################## [ 33s] libxml2-2.10.2-1.17 ######################################## [ 33s] libelf-0.178-1.24 ######################################## [ 34s] coreutils-6.9-14.12 ######################################## [ 34s] libdw-0.178-1.24 ######################################## [ 34s] libgpg-error-1.43-1.1 ######################################## [ 35s] libblkid-2.37.4-2.6 ######################################## [ 35s] nspr-4.35-1.16 ######################################## [ 35s] libgcrypt-1.10.1-1.1 ######################################## [ 36s] libxslt-1.1.37-1.1 ######################################## [ 36s] pam-1.1.6-3.2 ######################################## [ 37s] binutils-2.33.1-1.23 ######################################## [ 37s] libcap-2.24-1.16 ######################################## [ 37s] libfreebl3-3.98-1.12 ######################################## [ 38s] liblua-5.1.5-1.18 ######################################## [ 39s] libopenssl11-1.1.1w-1.6 ######################################## [ 39s] libpopt-1.16-1.16 ######################################## [ 39s] libuuid-2.37.4-2.6 ######################################## [ 40s] libzstd1-1.4.5-1.19 ######################################## [ 40s] libfdisk-2.37.4-2.6 ######################################## [ 41s] libxslt-tools-1.1.37-1.1 ######################################## [ 41s] nss-certs-3.98-1.12 ######################################## [ 41s] libmount-2.37.4-2.6 ######################################## [ 41s] libasm-0.178-1.24 ######################################## [ 41s] linux-glibc-devel-3.10-1.22 ######################################## [ 42s] glibc-devel-2.30-1.23 ######################################## [ 42s] zlib-devel-1.3-1.7 ######################################## [ 42s] libgpg-error-devel-1.43-1.1 ######################################## [ 42s] libgcrypt-devel-1.10.1-1.1 ######################################## [ 42s] gzip-1.3.12-1.16 ######################################## [ 42s] bzip2-1.0.8-1.17 ######################################## [ 42s] libcc1-9.2.0-1.21 ######################################## [ 42s] libubsan-9.2.0-1.21 ######################################## [ 43s] libgfortran-9.2.0-1.21 ######################################## [ 43s] xz-devel-5.2.5-1.23 ######################################## [ 43s] xz-5.2.5-1.23 ######################################## [ 43s] terminfo-base-full-6.2-1.24 ######################################## [ 43s] libncurses6-6.2-1.24 ######################################## [ 44s] libreadline-5.2-1.18 ######################################## [ 44s] libxml2-tools-2.10.2-1.17 ######################################## [ 44s] ncurses-devel-6.2-1.24 ######################################## [ 44s] readline-devel-5.2-1.18 ######################################## [ 44s] libxml2-devel-2.10.2-1.17 ######################################## [ 44s] make-4.3-1.16 ######################################## [ 45s] findutils-4.3.8-1.17 ######################################## [ 45s] gdbm-1.8.3-1.24 ######################################## [ 48s] perl-5.34.0-1.17 ######################################## [ 48s] build-mkbaselibs-20120927-1.1 ######################################## [ 48s] libatomic-9.2.0-1.21 ######################################## [ 49s] libattr-2.5.1-1.19 ######################################## [ 49s] libacl-2.2.53-1.18 ######################################## [ 49s] tar-1.17-1.1 ######################################## [ 50s] libarchive-3.7.7-2.1 ######################################## [ 50s] libgomp-9.2.0-1.21 ######################################## [ 50s] libitm-9.2.0-1.21 ######################################## [ 52s] gcc-9.2.0-1.21 ######################################## [ 52s] libltdl-2.4.6-1.23 ######################################## [ 52s] libpcre-8.45-1.8 ######################################## [ 53s] libsmack-1.3.1-1.16 ######################################## [ 53s] libsmartcols-2.37.4-2.6 ######################################## [ 53s] libsqlite-3.39.0-1.17 ######################################## [ 54s] libsoftokn3-3.98-1.12 ######################################## [ 54s] nss-3.98-1.12 ######################################## [ 54s] m4-1.4.19-1.1 ######################################## [ 54s] autoconf-2.71-1.22 ######################################## [ 55s] automake-1.16.4-1.21 ######################################## [ 55s] patch-2.7.6-1.16 ######################################## [ 55s] sed-4.1c-1.1 ######################################## [ 56s] util-linux-2.37.4-2.6 ######################################## [ 56s] libmagic-data-5.41-1.16 ######################################## [ 56s] libmagic-5.41-1.16 ######################################## [ 56s] rpm-4.14.1.1-2.12 ######################################## [ 57s] rpm-build-4.14.1.1-2.12 ######################################## [ 57s] file-5.41-1.16 ######################################## [ 57s] util-linux-su-2.37.4-2.6 ######################################## [ 57s] libtool-2.4.6-1.23 ######################################## [ 57s] smack-1.3.1-1.16 ######################################## [ 57s] grep-2.5.2-1.1 ######################################## [ 71s] qemu-accel-x86_64-aarch64-0.4-2.10 ######################################## [ 72s] build-20120927-1.1 ######################################## [ 72s] libxslt-devel-1.1.37-1.1 ######################################## [ 72s] libncurses-6.2-1.24 ######################################## [ 72s] less-466-1.1 ######################################## [ 72s] libopenssl1.1-devel-1.1.1w-1.6 ######################################## [ 72s] elfutils-0.178-1.24 ######################################## [ 72s] glibc-locale-2.30-1.23 ######################################## [ 73s] tzdata-2023c-1.1 ######################################## [ 73s] libstdc++-devel-9.2.0-1.21 ######################################## [ 75s] cpp-9.2.0-1.21 ######################################## [ 76s] gcc-c++-9.2.0-1.21 ######################################## [ 76s] build-compare-2015.04.28-1.12 ######################################## [ 83s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 84s] gawk-3.1.5-1.1 ######################################## [ 84s] cpio-2.8-1.1 ######################################## [ 84s] diffutils-3.3-1.1 ######################################## [ 84s] fdupes-2.1.2-1.18 ######################################## [ 84s] hostname-3.23-1.1 ######################################## [ 84s] net-tools-2.0_20121208git-1.7 ######################################## [ 84s] update-alternatives-1.21.18-1.1 ######################################## [ 84s] which-2.17-1.1 ######################################## [ 85s] now finalizing build dir... [ 87s] ----------------------------------------------------------------- [ 87s] I have the following modifications for xmlsec1.spec: [ 87s] 5c5 [ 87s] < Release: 0 [ 87s] --- [ 87s] > Release: 1.9 [ 87s] 136a137 [ 87s] > %changelog [ 88s] build target is aarch64-tizen-linux [ 88s] ----------------------------------------------------------------- [ 88s] ----- building xmlsec1.spec (user abuild) [ 88s] ----------------------------------------------------------------- [ 88s] ----------------------------------------------------------------- [ 88s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-7.0-Base/standard/c8a36b5cbbe5c1da86561c747b78249e-xmlsec1' /home/abuild/rpmbuild/SOURCES/xmlsec1.spec [ 88s] Building target platforms: aarch64-tizen-linux [ 88s] Building for target aarch64-tizen-linux [ 88s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.CIfS1o [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + rm -rf xmlsec1-1.2.28 [ 88s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/xmlsec1-1.2.28.tar.gz [ 88s] + /bin/tar -xof - [ 88s] + STATUS=0 [ 88s] + '[' 0 -ne 0 ']' [ 88s] + cd xmlsec1-1.2.28 [ 88s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 88s] + cp /home/abuild/rpmbuild/SOURCES/xmlsec1.manifest . [ 88s] + exit 0 [ 88s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.UUk2ur [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd xmlsec1-1.2.28 [ 88s] ++ uname -m [ 88s] + [[ aarch64 == \a\a\r\c\h\6\4 ]] [ 88s] + ref=/usr/lib/rpm [ 88s] + for s in guess sub [ 88s] ++ find -maxdepth 8 -name config.guess [ 88s] + for s in guess sub [ 88s] ++ find -maxdepth 8 -name config.sub [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + LDFLAGS= [ 89s] + export LDFLAGS [ 89s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 89s] + export CFLAGS [ 89s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 89s] + export CXXFLAGS [ 89s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 89s] + export FFLAGS [ 89s] + autoreconf -v --install --force [ 90s] autoreconf: export WARNINGS= [ 90s] autoreconf: Entering directory '.' [ 90s] autoreconf: configure.ac: not using Gettext [ 91s] autoreconf: running: aclocal --force -I m4 [ 99s] autoreconf: configure.ac: tracing [ 102s] autoreconf: running: libtoolize --copy --force [ 105s] libtoolize: putting auxiliary files in '.'. [ 105s] libtoolize: copying file './ltmain.sh' [ 105s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 105s] libtoolize: copying file 'm4/libtool.m4' [ 105s] libtoolize: copying file 'm4/ltoptions.m4' [ 105s] libtoolize: copying file 'm4/ltsugar.m4' [ 106s] libtoolize: copying file 'm4/ltversion.m4' [ 106s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 106s] autoreconf: configure.ac: not using Intltool [ 106s] autoreconf: configure.ac: not using Gtkdoc [ 106s] autoreconf: running: aclocal --force -I m4 [ 116s] autoreconf: running: /usr/bin/autoconf --force [ 119s] configure.ac:39: warning: The macro `AC_HEADER_STDC' is obsolete. [ 119s] configure.ac:39: You should run autoupdate. [ 119s] ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... [ 119s] configure.ac:39: the top level [ 119s] configure.ac:40: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 119s] configure.ac:40: You should run autoupdate. [ 119s] m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from... [ 119s] configure.ac:40: the top level [ 119s] configure.ac:68: warning: The macro `AC_HEADER_STDC' is obsolete. [ 119s] configure.ac:68: You should run autoupdate. [ 119s] ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... [ 119s] configure.ac:68: the top level [ 119s] configure.ac:99: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:99: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:99: the top level [ 119s] configure.ac:116: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:116: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:116: the top level [ 119s] configure.ac:129: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:129: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:129: the top level [ 119s] configure.ac:220: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:220: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:220: the top level [ 119s] configure.ac:232: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:232: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:232: the top level [ 119s] configure.ac:243: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:243: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:243: the top level [ 119s] configure.ac:288: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:288: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:288: the top level [ 119s] configure.ac:289: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:289: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:289: the top level [ 119s] configure.ac:465: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:465: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:465: the top level [ 119s] configure.ac:466: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:466: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:466: the top level [ 119s] configure.ac:663: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:663: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:663: the top level [ 119s] configure.ac:909: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:909: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:909: the top level [ 119s] configure.ac:910: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:910: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:910: the top level [ 119s] configure.ac:911: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:911: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:911: the top level [ 119s] configure.ac:912: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:912: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:912: the top level [ 119s] configure.ac:1205: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1205: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:1205: the top level [ 119s] configure.ac:1386: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1386: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:1386: the top level [ 119s] configure.ac:1548: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1548: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1548: the top level [ 119s] configure.ac:1619: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1619: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1619: the top level [ 119s] configure.ac:1692: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1692: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:1692: the top level [ 119s] configure.ac:1794: warning: back quotes and double quotes must not be escaped in: The value \"$XMLSEC_DEFAULT_CRYPTO\" is not a recongnized crypto library name [ 119s] configure.ac:1804: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1804: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1804: the top level [ 119s] configure.ac:1817: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1817: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1817: the top level [ 119s] configure.ac:1833: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1833: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1833: the top level [ 119s] configure.ac:1849: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1849: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1849: the top level [ 119s] configure.ac:1865: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1865: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1865: the top level [ 119s] configure.ac:1881: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1881: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1881: the top level [ 119s] configure.ac:1897: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1897: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1897: the top level [ 119s] configure.ac:1913: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1913: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1913: the top level [ 119s] configure.ac:1930: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1930: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1930: the top level [ 119s] configure.ac:1946: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1946: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1946: the top level [ 119s] configure.ac:1962: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1962: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1962: the top level [ 119s] configure.ac:1978: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1978: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1978: the top level [ 119s] configure.ac:1994: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:1994: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:1994: the top level [ 119s] configure.ac:2010: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2010: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2010: the top level [ 119s] configure.ac:2026: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2026: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2026: the top level [ 119s] configure.ac:2043: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2043: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2043: the top level [ 119s] configure.ac:2060: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2060: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2060: the top level [ 119s] configure.ac:2076: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2076: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2076: the top level [ 119s] configure.ac:2092: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2092: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2092: the top level [ 119s] configure.ac:2106: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2106: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2106: the top level [ 119s] configure.ac:2121: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2121: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2121: the top level [ 119s] configure.ac:2136: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2136: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2136: the top level [ 119s] configure.ac:2152: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2152: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2152: the top level [ 119s] configure.ac:2168: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2168: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2168: the top level [ 119s] configure.ac:2206: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2206: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2206: the top level [ 119s] configure.ac:2229: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2229: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1553: AC_ARG_WITH is expanded from... [ 119s] configure.ac:2229: the top level [ 119s] configure.ac:2245: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2245: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2245: the top level [ 119s] configure.ac:2257: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2257: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2257: the top level [ 119s] configure.ac:2269: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2269: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2269: the top level [ 119s] configure.ac:2281: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2281: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2281: the top level [ 119s] configure.ac:2293: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2293: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2293: the top level [ 119s] configure.ac:2305: warning: The macro `AC_HELP_STRING' is obsolete. [ 119s] configure.ac:2305: You should run autoupdate. [ 119s] ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... [ 119s] ./lib/autoconf/general.m4:1534: AC_ARG_ENABLE is expanded from... [ 119s] configure.ac:2305: the top level [ 122s] autoreconf: running: /usr/bin/autoheader --force [ 126s] autoreconf: running: automake --add-missing --copy --force-missing [ 131s] configure.ac:37: installing './compile' [ 131s] configure.ac:14: installing './config.guess' [ 131s] configure.ac:14: installing './config.sub' [ 131s] configure.ac:25: installing './install-sh' [ 131s] configure.ac:25: installing './missing' [ 132s] apps/Makefile.am: installing './depcomp' [ 140s] autoreconf: Leaving directory '.' [ 140s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --enable-static --enable-dynamic --disable-crypto-dl --disable-apps-crypto-dl --without-gnutls [ 142s] configure: WARNING: unrecognized options: --enable-dynamic [ 143s] checking build system type... aarch64-tizen-linux-gnu [ 143s] checking host system type... aarch64-tizen-linux-gnu [ 143s] checking for a BSD-compatible install... /bin/install -c [ 143s] checking whether build environment is sane... yes [ 143s] checking for a race-free mkdir -p... /bin/mkdir -p [ 143s] checking for gawk... gawk [ 143s] checking whether make sets $(MAKE)... yes [ 143s] checking whether make supports nested variables... yes [ 143s] checking whether UID '399' is supported by ustar format... yes [ 143s] checking whether GID '399' is supported by ustar format... yes [ 143s] checking how to create a ustar tar archive... gnutar [ 143s] checking whether to enable maintainer-specific portions of Makefiles... no [ 143s] checking whether make supports nested variables... (cached) yes [ 143s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 144s] checking whether the C compiler works... yes [ 144s] checking for C compiler default output file name... a.out [ 144s] checking for suffix of executables... [ 144s] checking whether we are cross compiling... no [ 144s] checking for suffix of object files... o [ 144s] checking whether the compiler supports GNU C... yes [ 145s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 145s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 145s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 145s] checking whether make supports the include directive... yes (GNU style) [ 145s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 145s] checking for stdio.h... yes [ 146s] checking for stdlib.h... yes [ 146s] checking for string.h... yes [ 146s] checking for inttypes.h... yes [ 146s] checking for stdint.h... yes [ 146s] checking for strings.h... yes [ 146s] checking for sys/stat.h... yes [ 146s] checking for sys/types.h... yes [ 146s] checking for unistd.h... yes [ 146s] checking for grep that handles long lines and -e... /bin/grep [ 146s] checking for egrep... /bin/grep -E [ 146s] checking how to print strings... printf [ 146s] checking for a sed that does not truncate output... /bin/sed [ 146s] checking for fgrep... /bin/grep -F [ 147s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 147s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 147s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 147s] checking the name lister (/bin/nm -B) interface... BSD nm [ 147s] checking whether ln -s works... yes [ 147s] checking the maximum length of command line arguments... 1572864 [ 147s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 147s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 147s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 147s] checking for aarch64-tizen-linux-gnu-objdump... no [ 147s] checking for objdump... objdump [ 147s] checking how to recognize dependent libraries... pass_all [ 147s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 147s] checking for dlltool... no [ 147s] checking how to associate runtime and link libraries... printf %s\n [ 147s] checking for aarch64-tizen-linux-gnu-ar... no [ 147s] checking for ar... ar [ 147s] checking for archiver @FILE support... @ [ 147s] checking for aarch64-tizen-linux-gnu-strip... no [ 147s] checking for strip... strip [ 147s] checking for aarch64-tizen-linux-gnu-ranlib... no [ 147s] checking for ranlib... ranlib [ 148s] checking command to parse /bin/nm -B output from aarch64-tizen-linux-gnu-gcc object... ok [ 148s] checking for sysroot... no [ 148s] checking for a working dd... /bin/dd [ 148s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 148s] checking for aarch64-tizen-linux-gnu-mt... no [ 148s] checking for mt... no [ 148s] checking if : is a manifest tool... no [ 148s] checking for dlfcn.h... yes [ 148s] checking for objdir... .libs [ 148s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 148s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 149s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 149s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 149s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 149s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 149s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 149s] checking whether -lc should be explicitly linked in... no [ 150s] checking dynamic linker characteristics... GNU/Linux ld.so [ 150s] checking how to hardcode library paths into programs... immediate [ 150s] checking whether stripping libraries is possible... yes [ 150s] checking if libtool supports shared libraries... yes [ 150s] checking whether to build shared libraries... yes [ 150s] checking whether to build static libraries... yes [ 150s] checking for cp... /bin/cp [ 150s] checking for mv... /bin/mv [ 150s] checking for tar... /bin/tar [ 150s] checking for perl... /bin/perl [ 150s] checking for help2man... no [ 150s] checking for xsltproc... /bin/xsltproc [ 150s] checking for man2html... no [ 150s] checking for gtkdoc-mkhtml... no [ 150s] checking for gtkdoc-mkdb... no [ 150s] checking for gtkdoc-scan... no [ 150s] checking for dirent.h that defines DIR... yes [ 150s] checking for library containing opendir... none required [ 150s] checking for egrep... (cached) /bin/grep -E [ 150s] checking for stdio.h... (cached) yes [ 150s] checking for stdlib.h... (cached) yes [ 150s] checking for string.h... (cached) yes [ 150s] checking for ctype.h... yes [ 150s] checking for errno.h... yes [ 150s] checking for ansidecl.h... no [ 151s] checking for time.h... yes [ 151s] checking for strchr... yes [ 151s] checking for strrchr... yes [ 151s] checking for printf... yes [ 151s] checking for sprintf... yes [ 152s] checking for fprintf... yes [ 152s] checking for snprintf... yes [ 152s] checking for vfprintf... yes [ 152s] checking for vsprintf... yes [ 152s] checking for vsnprintf... yes [ 152s] checking for sscanf... yes [ 153s] checking for timegm... yes [ 153s] checking for development environment... disabled [ 153s] checking for man pages build... disabled [ 153s] checking for docs build... disabled [ 153s] checking for shared library suffix... .so [ 153s] checking for __FUNCTION__ or __func__... __func__ [ 153s] checking size of size_t... 8 [ 153s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 153s] checking pkg-config is at least version 0.9.0... yes [ 153s] checking for libxml-2.0 >= 2.8.0... yes [ 153s] checking for libxml2 library >= 2.8.0... checking how to run the C preprocessor... aarch64-tizen-linux-gnu-gcc -E [ 153s] yes [ 153s] checking for libxslt >= 1.0.20... yes [ 154s] checking for libxslt library >= 1.0.20... yes [ 154s] checking for openssl >= 1.0.0... no [ 154s] checking for openssl library installation in the typical folders... yes ("-I/usr/include -L/usr/lib64") [ 154s] checking for openssl library >= 1.0.0... yes (openssl version '1.1.0') [ 154s] checking for seamonkey-nspr >= 4.4.1... no [ 154s] checking for mozilla-nspr >= 1.4... no [ 154s] checking for xulrunner-nspr >= 4.4.1... no [ 154s] checking for nspr >= 4.4.1... no [ 155s] checking for seamonkey-nss >= 1.0... no [ 155s] checking for mozilla-nss >= 1.4... no [ 155s] checking for xulrunner-nss >= 3.11.1... no [ 155s] checking for nss >= 3.11.1... no [ 155s] checking for nspr library installation in the typical folders... not found [ 155s] checking for nss library installation in the typical folders... not found [ 155s] checking for nspr library installation... not found [ 155s] checking for nss library installation... not found [ 155s] checking for nspr library >= 4.4.1... no [ 155s] checking for nss library >= 3.11.1... no [ 156s] checking for gcrypt >= 1.4.0... no [ 156s] checking for libgcrypt20 >= 1.4.0... no [ 156s] checking for libgcrypt11 >= 1.4.0... no [ 156s] checking for libgcrypt >= 1.4.0... yes [ 156s] checking for libgcrypt library >= 1.4.0... yes [ 156s] checking for libgnutls library >= 2.8.0... disabled [ 156s] checking for mscrypto... not found [ 157s] checking for mscng... not found [ 157s] checking for default crypto library... yes ("openssl") [ 157s] checking for MD5 support... yes [ 157s] checking for RIPEMD-160 support... yes [ 157s] checking for SHA1 support... yes [ 157s] checking for SHA224 support... yes [ 157s] checking for SHA256 support... yes [ 157s] checking for SHA384 support... yes [ 157s] checking for SHA512 support... yes [ 157s] checking for HMAC support... yes [ 157s] checking for DSA support... yes [ 157s] checking for RSA support... yes [ 157s] checking for x509 support... yes [ 157s] checking for DES support... yes [ 157s] checking for AES support... yes [ 157s] checking for GOST support... disabled [ 157s] checking for EXPERMIENTAL GOST2012 support... disabled [ 157s] checking for XMLDSig support... yes [ 157s] checking for XMLEnc support... yes [ 157s] checking for soap support... disabled [ 157s] checking for mans... yes [ 157s] checking for docs... yes [ 157s] checking for apps... yes [ 157s] checking for static linking... disabled [ 157s] checking for xmlsec-crypto dynamic loading support... disabled [ 157s] checking for xmlsec-crypto dynamic loading support in command line tool... disabled [ 157s] checking for docs folder... $(htmldir) [ 157s] checking for Simple Keys Manager testing... yes [ 157s] checking for templates testing... yes [ 157s] checking for debugging... disabled [ 157s] checking for warnings as errors... disabled [ 157s] checking for profiling... disabled [ 157s] checking for pedantic... disabled [ 157s] checking that generated files are newer than configure... done [ 157s] configure: creating ./config.status [ 160s] config.status: creating include/xmlsec/openssl/Makefile [ 160s] config.status: creating src/openssl/Makefile [ 160s] config.status: creating include/xmlsec/gcrypt/Makefile [ 161s] config.status: creating src/gcrypt/Makefile [ 161s] config.status: creating include/xmlsec/version.h [ 161s] config.status: creating Makefile [ 161s] config.status: creating include/Makefile [ 161s] config.status: creating include/xmlsec/Makefile [ 161s] config.status: creating include/xmlsec/private/Makefile [ 161s] config.status: creating src/Makefile [ 161s] config.status: creating apps/Makefile [ 161s] config.status: creating docs/Makefile [ 161s] config.status: creating docs/api/Makefile [ 161s] config.status: creating man/Makefile [ 162s] config.status: creating xmlsec1-openssl.pc [ 162s] config.status: creating xmlsec1-gnutls.pc [ 162s] config.status: creating xmlsec1-gcrypt.pc [ 162s] config.status: creating xmlsec1-nss.pc [ 162s] config.status: creating xmlsec1.spec [ 162s] config.status: creating xmlsec1Conf.sh [ 162s] config.status: creating xmlsec1-config [ 163s] config.status: creating config.h [ 163s] config.status: executing depfiles commands [ 166s] config.status: executing libtool commands [ 166s] configure: WARNING: unrecognized options: --enable-dynamic [ 167s] + /bin/make -j12 CFLAGS+=-fPIE LDFLAGS+=-pie [ 167s] /bin/make all-recursive [ 167s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 167s] Making all in include [ 167s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 167s] Making all in xmlsec [ 167s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 167s] Making all in private [ 167s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 167s] make[4]: Nothing to be done for 'all'. [ 167s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 167s] Making all in openssl [ 167s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 167s] make[4]: Nothing to be done for 'all'. [ 167s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 167s] Making all in gcrypt [ 167s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 167s] make[4]: Nothing to be done for 'all'. [ 167s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 167s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 167s] make[4]: Nothing to be done for 'all-am'. [ 167s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 167s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 167s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 167s] make[3]: Nothing to be done for 'all-am'. [ 167s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 167s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 167s] Making all in src [ 167s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 167s] Making all in . [ 167s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 167s] CC app.lo [ 167s] CC base64.lo [ 167s] CC bn.lo [ 167s] CC buffer.lo [ 167s] CC c14n.lo [ 167s] CC dl.lo [ 167s] CC errors.lo [ 167s] CC enveloped.lo [ 167s] CC io.lo [ 167s] CC keyinfo.lo [ 167s] CC keys.lo [ 167s] CC keysdata.lo [ 169s] CC keysmngr.lo [ 169s] CC kw_aes_des.lo [ 169s] CC list.lo [ 169s] CC membuf.lo [ 169s] CC nodeset.lo [ 169s] CC relationship.lo [ 169s] CC strings.lo [ 169s] CC parser.lo [ 169s] CC templates.lo [ 170s] CC transforms.lo [ 170s] CC x509.lo [ 170s] CC xmldsig.lo [ 170s] CC xmlenc.lo [ 170s] CC xmlsec.lo [ 170s] CC xmltree.lo [ 170s] CC xpath.lo [ 171s] CC xslt.lo [ 174s] CCLD libxmlsec1.la [ 175s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 175s] Making all in openssl [ 175s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 175s] CC libxmlsec1_openssl_la-app.lo [ 175s] CC libxmlsec1_openssl_la-bn.lo [ 175s] CC libxmlsec1_openssl_la-ciphers.lo [ 175s] CC libxmlsec1_openssl_la-crypto.lo [ 176s] CC libxmlsec1_openssl_la-digests.lo [ 176s] CC libxmlsec1_openssl_la-evp.lo [ 176s] CC libxmlsec1_openssl_la-evp_signatures.lo [ 176s] CC libxmlsec1_openssl_la-hmac.lo [ 176s] CC libxmlsec1_openssl_la-kw_aes.lo [ 176s] CC libxmlsec1_openssl_la-kw_des.lo [ 176s] CC libxmlsec1_openssl_la-kt_rsa.lo [ 176s] CC libxmlsec1_openssl_la-signatures.lo [ 176s] CC libxmlsec1_openssl_la-symkeys.lo [ 177s] CC libxmlsec1_openssl_la-x509.lo [ 177s] CC libxmlsec1_openssl_la-x509vfy.lo [ 179s] CCLD libxmlsec1-openssl.la [ 180s] libtool: warning: '/lib64/libxml2.la' seems to be moved [ 180s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 180s] Making all in gcrypt [ 180s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 180s] CC libxmlsec1_gcrypt_la-app.lo [ 180s] CC libxmlsec1_gcrypt_la-asn1.lo [ 180s] CC libxmlsec1_gcrypt_la-ciphers.lo [ 180s] CC libxmlsec1_gcrypt_la-hmac.lo [ 180s] CC libxmlsec1_gcrypt_la-digests.lo [ 180s] CC libxmlsec1_gcrypt_la-kw_aes.lo [ 180s] CC libxmlsec1_gcrypt_la-kw_des.lo [ 180s] CC libxmlsec1_gcrypt_la-symkeys.lo [ 180s] CC libxmlsec1_gcrypt_la-asymkeys.lo [ 180s] CC libxmlsec1_gcrypt_la-crypto.lo [ 180s] CC libxmlsec1_gcrypt_la-signatures.lo [ 182s] CCLD libxmlsec1-gcrypt.la [ 182s] libtool: warning: '/lib64/libxml2.la' seems to be moved [ 183s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 183s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 183s] Making all in apps [ 183s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 183s] CC xmlsec.o [ 183s] CC crypto.o [ 183s] CC cmdline.o [ 183s] CCLD xmlsec1 [ 184s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 184s] Making all in man [ 184s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 184s] make[2]: Nothing to be done for 'all'. [ 184s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 184s] Making all in docs [ 184s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 184s] Making all in api [ 184s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 185s] Copying api-docs... [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 185s] make[3]: Nothing to be done for 'all-am'. [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 185s] ======= Run 'make docs' in the xmlsec/docs folder to rebuild docs [ 185s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 185s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 185s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 185s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 185s] + exit 0 [ 185s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yrSlIq [ 185s] + umask 022 [ 185s] + cd /home/abuild/rpmbuild/BUILD [ 185s] + cd xmlsec1-1.2.28 [ 185s] + LANG=C [ 185s] + export LANG [ 185s] + unset DISPLAY [ 185s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 185s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 185s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 install [ 185s] Making install in include [ 185s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] Making install in xmlsec [ 185s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] Making install in private [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] /bin/make install-exec-hook [ 185s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/private [ 185s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/private' [ 185s] /bin/install -c -m 644 xslt.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/private' [ 185s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/private' [ 185s] Making install in openssl [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] /bin/make install-exec-hook [ 185s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/openssl [ 185s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 185s] /bin/install -c -m 644 app.h bn.h crypto.h evp.h symbols.h x509.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/openssl' [ 185s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/openssl' [ 185s] Making install in gcrypt [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] /bin/make install-exec-hook [ 185s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/gcrypt [ 185s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 185s] /bin/install -c -m 644 app.h crypto.h symbols.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec/gcrypt' [ 185s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec/gcrypt' [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] make[4]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] /bin/make install-exec-hook [ 185s] make[5]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec [ 185s] make[5]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec' [ 185s] /bin/install -c -m 644 app.h base64.h bn.h buffer.h crypto.h dl.h errors.h exports.h io.h keyinfo.h keysdata.h keys.h keysmngr.h list.h membuf.h nodeset.h parser.h private.h strings.h templates.h transforms.h version.h x509.h xmldsig.h xmlenc.h xmlsec.h xmltree.h '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/include/xmlsec1/xmlsec' [ 185s] make[4]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include/xmlsec' [ 185s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] make[3]: Nothing to be done for 'install-exec-am'. [ 185s] make[3]: Nothing to be done for 'install-data-am'. [ 185s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/include' [ 185s] Making install in src [ 185s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 185s] Making install in . [ 185s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 185s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 185s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 185s] /bin/sh ../libtool --mode=install /bin/install -c libxmlsec1.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 185s] libtool: install: /bin/install -c .libs/libxmlsec1.so.1.2.28 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.so.1.2.28 [ 185s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so.1 || { rm -f libxmlsec1.so.1 && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so.1; }; }) [ 186s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1.so.1.2.28 libxmlsec1.so || { rm -f libxmlsec1.so && ln -s libxmlsec1.so.1.2.28 libxmlsec1.so; }; }) [ 186s] libtool: install: /bin/install -c .libs/libxmlsec1.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.la [ 186s] libtool: install: /bin/install -c .libs/libxmlsec1.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.a [ 186s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.a [ 186s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.a [ 186s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 186s] make[3]: Nothing to be done for 'install-data-am'. [ 186s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 186s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 186s] Making install in openssl [ 186s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 186s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 186s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 186s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-openssl.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 186s] libtool: warning: relinking 'libxmlsec1-openssl.la' [ 186s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl; /bin/sh "/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool" --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-openssl.la -rpath /usr/lib64 libxmlsec1_openssl_la-app.lo libxmlsec1_openssl_la-bn.lo libxmlsec1_openssl_la-ciphers.lo libxmlsec1_openssl_la-crypto.lo libxmlsec1_openssl_la-digests.lo libxmlsec1_openssl_la-evp.lo libxmlsec1_openssl_la-evp_signatures.lo libxmlsec1_openssl_la-hmac.lo libxmlsec1_openssl_la-kw_aes.lo libxmlsec1_openssl_la-kw_des.lo libxmlsec1_openssl_la-kt_rsa.lo libxmlsec1_openssl_la-signatures.lo libxmlsec1_openssl_la-symkeys.lo libxmlsec1_openssl_la-x509.lo libxmlsec1_openssl_la-x509vfy.lo -Wl,-rpath-link -Wl,/usr/lib64 -L/usr/lib64 -lcrypto -ldl -lxslt -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64) [ 186s] libtool: warning: '/lib64/libxml2.la' seems to be moved [ 187s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.28 [ 187s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1 || { rm -f libxmlsec1-openssl.so.1 && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so.1; }; }) [ 187s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so || { rm -f libxmlsec1-openssl.so && ln -s libxmlsec1-openssl.so.1.2.28 libxmlsec1-openssl.so; }; }) [ 187s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.la [ 187s] libtool: install: /bin/install -c .libs/libxmlsec1-openssl.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.a [ 187s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.a [ 187s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.a [ 187s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 187s] make[3]: Nothing to be done for 'install-data-am'. [ 187s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 187s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/openssl' [ 187s] Making install in gcrypt [ 187s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 187s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 187s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 187s] /bin/sh ../../libtool --mode=install /bin/install -c libxmlsec1-gcrypt.la '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 187s] libtool: warning: relinking 'libxmlsec1-gcrypt.la' [ 187s] libtool: install: (cd /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt; /bin/sh "/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/libtool" --silent --tag CC --mode=relink aarch64-tizen-linux-gnu-gcc -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIE -version-info 3:28:2 -pie -o libxmlsec1-gcrypt.la -rpath /usr/lib64 libxmlsec1_gcrypt_la-app.lo libxmlsec1_gcrypt_la-asn1.lo libxmlsec1_gcrypt_la-ciphers.lo libxmlsec1_gcrypt_la-crypto.lo libxmlsec1_gcrypt_la-digests.lo libxmlsec1_gcrypt_la-hmac.lo libxmlsec1_gcrypt_la-kw_aes.lo libxmlsec1_gcrypt_la-kw_des.lo libxmlsec1_gcrypt_la-symkeys.lo libxmlsec1_gcrypt_la-asymkeys.lo libxmlsec1_gcrypt_la-signatures.lo -lgcrypt -lxslt -lxml2 -lxml2 ../libxmlsec1.la -inst-prefix-dir /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64) [ 187s] libtool: warning: '/lib64/libxml2.la' seems to be moved [ 188s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.so.1.2.28T /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.28 [ 188s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1 || { rm -f libxmlsec1-gcrypt.so.1 && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so.1; }; }) [ 188s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64 && { ln -s -f libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so || { rm -f libxmlsec1-gcrypt.so && ln -s libxmlsec1-gcrypt.so.1.2.28 libxmlsec1-gcrypt.so; }; }) [ 188s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.lai /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.la [ 188s] libtool: install: /bin/install -c .libs/libxmlsec1-gcrypt.a /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 188s] libtool: install: chmod 644 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 188s] libtool: install: ranlib /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.a [ 188s] libtool: warning: remember to run 'libtool --finish /usr/lib64' [ 188s] make[3]: Nothing to be done for 'install-data-am'. [ 188s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/gcrypt' [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src' [ 188s] Making install in apps [ 188s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 188s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin' [ 188s] /bin/sh ../libtool --mode=install /bin/install -c xmlsec1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin' [ 188s] libtool: warning: '../src/openssl/libxmlsec1-openssl.la' has not been installed in '/usr/lib64' [ 188s] libtool: warning: '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/src/libxmlsec1.la' has not been installed in '/usr/lib64' [ 188s] libtool: warning: '../src/libxmlsec1.la' has not been installed in '/usr/lib64' [ 188s] libtool: install: /bin/install -c .libs/xmlsec1 /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin/xmlsec1 [ 188s] make[2]: Nothing to be done for 'install-data-am'. [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/apps' [ 188s] Making install in man [ 188s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 188s] make[2]: Nothing to be done for 'install-exec-am'. [ 188s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/man/man1' [ 188s] /bin/install -c -m 644 ./xmlsec1.1 ./xmlsec1-config.1 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/man/man1' [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 188s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/man' [ 188s] Making install in docs [ 188s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 188s] Making install in api [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 188s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 188s] make[3]: Nothing to be done for 'install-exec-am'. [ 188s] make[3]: Nothing to be done for 'install-data-am'. [ 188s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 188s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs/api' [ 188s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 188s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 188s] make[3]: Nothing to be done for 'install-exec-am'. [ 188s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1 [ 188s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/images [ 188s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/api [ 189s] /bin/sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/install-sh -d /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/api/images [ 189s] /bin/install -c -m 0644 ./*.html /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1 [ 189s] /bin/install -c -m 0644 ./*.ico /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1 [ 189s] /bin/install -c -m 0644 ./images/*.gif ./images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/images [ 189s] /bin/install -c -m 0644 ./api/*.html ./api/*.png ./api/*.sgml /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/api [ 189s] /bin/install: cannot stat `./api/*.sgml': No such file or directory [ 189s] make[3]: [Makefile:843: install-data-local] Error 1 (ignored) [ 189s] /bin/install -c -m 0644 ./api/images/*.png /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1/api/images [ 189s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 189s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 189s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/docs' [ 189s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 189s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 189s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin' [ 189s] /bin/install -c xmlsec1-config '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin' [ 189s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 189s] /bin/install -c -m 644 xmlsec1Conf.sh '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64' [ 189s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/aclocal' [ 189s] /bin/install -c -m 644 xmlsec1.m4 '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/aclocal' [ 189s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig' [ 189s] /bin/install -c -m 644 xmlsec1.pc xmlsec1-openssl.pc xmlsec1-gcrypt.pc '/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig' [ 189s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 189s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28' [ 189s] + rm -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/info/dir [ 189s] + xargs rm -f -- [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 -regex '.*\.la$' [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/info [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/packages [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1 [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc/xmlsec1-1.2.28 [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/gtk-doc [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/doc [ 189s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/man [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 -regex '.*/man/man./.*.[0-9]' [ 189s] + xargs rm -f -- [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 189s] + xargs rm -f -- [ 189s] + xargs rm -f -- [ 189s] + find /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 189s] + _target= [ 189s] + _symlinks=0 [ 189s] + _files=() [ 189s] + fdupes -q -n -r /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 189s] + read _file [ 189s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 189s] + _files+=($_file) [ 189s] + read _file [ 189s] + test -z /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 189s] + _files+=($_file) [ 189s] + read _file [ 189s] + test -z [ 189s] + _sorted_files=($(for i in ${_files[*]}; do echo $i; done | sort)) [ 189s] ++ for i in '${_files[*]}' [ 189s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 189s] ++ for i in '${_files[*]}' [ 189s] ++ echo /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 189s] ++ sort [ 189s] + _target=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc [ 189s] ++ seq 1 1 [ 189s] + for i in '$(seq 1 $((${#_sorted_files[@]}-1)))' [ 189s] + symlink_file=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 189s] + rm /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 189s] + test 0 = 1 [ 189s] + ln -f /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1-openssl.pc /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/pkgconfig/xmlsec1.pc [ 189s] + _files=() [ 189s] + read _file [ 189s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.28-1.9 --unique-debug-src-base xmlsec1-1.2.28-1.9.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28 [ 190s] 1+0 records in [ 190s] 1+0 records out [ 190s] 1+0 records in [ 190s] 1+0 records out [ 190s] 7 bytes (7 B) copied7 bytes (7 B) copied1+0 records in [ 190s] 1+0 records out [ 190s] 7 bytes (7 B) copied, 0.000752011 s, 9.3 kB/s [ 190s] , 0.000769401 s, 9.1 kB/s [ 190s] , 0.000704115 s, 9.9 kB/s [ 190s] 1+0 records in [ 190s] 1+0 records out [ 190s] 7 bytes (7 B) copied, 0.000802541 s, 8.7 kB/s [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/bin/xmlsec1 [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-gcrypt.so.1.2.28 [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1-openssl.so.1.2.28 [ 190s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/lib64/libxmlsec1.so.1.2.28 [ 190s] 0+0 records in [ 190s] 0+0 records out [ 190s] 0 bytes (0 B) copied, 0.000658049 s, 0.0 kB/s [ 190s] 0+0 records in [ 190s] 0+0 records out [ 190s] 0 bytes (0 B) copied, 0.00033474 s, 0.0 kB/s [ 190s] 0+0 records in [ 190s] 0+0 records out [ 190s] 0 bytes (0 B) copied, 0.000596108 s, 0.0 kB/s [ 190s] 0+0 records in [ 190s] 0+0 records out [ 190s] 0 bytes (0 B) copied, 0.000577972 s, 0.0 kB/s [ 190s] 4190 blocks [ 190s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debuginfo.manifest [ 190s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/xmlsec1-debugsource.manifest [ 190s] + /usr/lib/rpm/check-buildroot [ 191s] + /usr/lib/rpm//brp-compress [ 191s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 191s] + /usr/lib/rpm/brp-python-hardlink [ 191s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 191s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/xmlsec1-1.2.28/isu.list [ 191s] ~/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 ~/rpmbuild/BUILD/xmlsec1-1.2.28 [ 191s] ~/rpmbuild/BUILD/xmlsec1-1.2.28 [ 191s] Processing files: xmlsec1-1.2.28-1.9.aarch64 [ 191s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 191s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 191s] [ 191s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.P8lOPq [ 191s] + umask 022 [ 191s] + cd /home/abuild/rpmbuild/BUILD [ 191s] + cd xmlsec1-1.2.28 [ 191s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1 [ 191s] + export LC_ALL=C [ 191s] + LC_ALL=C [ 191s] + export LICENSEDIR [ 191s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1 [ 191s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1 [ 191s] + exit 0 [ 191s] Provides: libxmlsec1.so.1()(64bit) xmlsec1 = 1.2.28-1.9 xmlsec1(aarch-64) = 1.2.28-1.9 [ 191s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 191s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 191s] Requires(post): /sbin/ldconfig [ 191s] Requires(postun): /sbin/ldconfig [ 191s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdl.so.2()(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxml2.so.2(LIBXML2_2.6.12)(64bit) libxml2.so.2(LIBXML2_2.6.2)(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libxslt.so.1(LIBXML2_1.0.11)(64bit) libxslt.so.1(LIBXML2_1.0.22)(64bit) libz.so.1()(64bit) [ 191s] Processing files: xmlsec1-debugsource-1.2.28-1.9.aarch64 [ 191s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 191s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 191s] [ 192s] Provides: xmlsec1-debugsource = 1.2.28-1.9 xmlsec1-debugsource(aarch-64) = 1.2.28-1.9 [ 192s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 192s] Processing files: xmlsec1-gcrypt-1.2.28-1.9.aarch64 [ 192s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 192s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 192s] [ 192s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.97dL0m [ 192s] + umask 022 [ 192s] + cd /home/abuild/rpmbuild/BUILD [ 192s] + cd xmlsec1-1.2.28 [ 192s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 192s] + export LC_ALL=C [ 192s] + LC_ALL=C [ 192s] + export LICENSEDIR [ 192s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 192s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-gcrypt [ 192s] + exit 0 [ 192s] Provides: libxmlsec1-gcrypt.so.1()(64bit) xmlsec1-gcrypt = 1.2.28-1.9 xmlsec1-gcrypt(aarch-64) = 1.2.28-1.9 [ 192s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 192s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 192s] Requires(post): /sbin/ldconfig [ 192s] Requires(postun): /sbin/ldconfig [ 192s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libdl.so.2()(64bit) libgcrypt.so.20()(64bit) libgcrypt.so.20(GCRYPT_1.6)(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libz.so.1()(64bit) [ 192s] Processing files: xmlsec1-openssl-1.2.28-1.9.aarch64 [ 192s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 192s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 192s] [ 192s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.sM7bpq [ 192s] + umask 022 [ 192s] + cd /home/abuild/rpmbuild/BUILD [ 192s] + cd xmlsec1-1.2.28 [ 192s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-openssl [ 192s] + export LC_ALL=C [ 192s] + LC_ALL=C [ 192s] + export LICENSEDIR [ 192s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-openssl [ 192s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-openssl [ 192s] + exit 0 [ 192s] Provides: libxmlsec1-openssl.so.1()(64bit) xmlsec1-openssl = 1.2.28-1.9 xmlsec1-openssl(aarch-64) = 1.2.28-1.9 [ 192s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 192s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 192s] Requires(post): /sbin/ldconfig [ 192s] Requires(postun): /sbin/ldconfig [ 192s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libcrypto.so.1.1()(64bit) libcrypto.so.1.1(OPENSSL_1_1_0)(64bit) libdl.so.2()(64bit) liblzma.so.5()(64bit) libm.so.6()(64bit) libxml2.so.2()(64bit) libxml2.so.2(LIBXML2_2.4.30)(64bit) libxml2.so.2(LIBXML2_2.6.0)(64bit) libxmlsec1.so.1()(64bit) libxslt.so.1()(64bit) libz.so.1()(64bit) [ 192s] Processing files: xmlsec1-devel-1.2.28-1.9.aarch64 [ 192s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 192s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 192s] [ 192s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.OBwE4m [ 192s] + umask 022 [ 192s] + cd /home/abuild/rpmbuild/BUILD [ 192s] + cd xmlsec1-1.2.28 [ 192s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel [ 192s] + export LC_ALL=C [ 192s] + LC_ALL=C [ 192s] + export LICENSEDIR [ 192s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel [ 192s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel [ 192s] + exit 0 [ 192s] Provides: pkgconfig(xmlsec1) = 1.2.28 pkgconfig(xmlsec1-gcrypt) = 1.2.28 pkgconfig(xmlsec1-openssl) = 1.2.28 xmlsec1-devel = 1.2.28-1.9 xmlsec1-devel(aarch-64) = 1.2.28-1.9 [ 192s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PartialHardlinkSets) <= 4.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 192s] Requires: /bin/sh /usr/bin/pkg-config libxmlsec1-gcrypt.so.1()(64bit) libxmlsec1-openssl.so.1()(64bit) libxmlsec1.so.1()(64bit) pkgconfig(libxml-2.0) >= 2.8.0 pkgconfig(libxslt) >= 1.0.20 [ 192s] Processing files: xmlsec1-devel-static-1.2.28-1.9.aarch64 [ 192s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 192s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 192s] [ 192s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.1OIu8n [ 192s] + umask 022 [ 193s] + cd /home/abuild/rpmbuild/BUILD [ 193s] + cd xmlsec1-1.2.28 [ 193s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel-static [ 193s] + export LC_ALL=C [ 193s] + LC_ALL=C [ 193s] + export LICENSEDIR [ 193s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel-static [ 193s] + cp -pr Copyright /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64/usr/share/licenses/xmlsec1-devel-static [ 193s] + exit 0 [ 193s] Provides: xmlsec1-devel-static = 1.2.28-1.9 xmlsec1-devel-static(aarch-64) = 1.2.28-1.9 [ 193s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 193s] Processing files: xmlsec1-debuginfo-1.2.28-1.9.aarch64 [ 193s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 193s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 193s] [ 193s] Provides: xmlsec1-debuginfo = 1.2.28-1.9 xmlsec1-debuginfo(aarch-64) = 1.2.28-1.9 [ 193s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 193s] Recommends: xmlsec1-debugsource(aarch-64) = 1.2.28-1.9 [ 193s] Processing files: xmlsec1-gcrypt-debuginfo-1.2.28-1.9.aarch64 [ 193s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 193s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 193s] [ 193s] Provides: xmlsec1-gcrypt-debuginfo = 1.2.28-1.9 xmlsec1-gcrypt-debuginfo(aarch-64) = 1.2.28-1.9 [ 193s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 193s] Recommends: xmlsec1-debugsource(aarch-64) = 1.2.28-1.9 [ 193s] Processing files: xmlsec1-openssl-debuginfo-1.2.28-1.9.aarch64 [ 193s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 193s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 193s] [ 193s] Provides: xmlsec1-openssl-debuginfo = 1.2.28-1.9 xmlsec1-openssl-debuginfo(aarch-64) = 1.2.28-1.9 [ 193s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 193s] Recommends: xmlsec1-debugsource(aarch-64) = 1.2.28-1.9 [ 193s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 193s] Wrote: /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-1.9.src.rpm [ 193s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.28-1.9.aarch64.rpm [ 194s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.28-1.9.aarch64.rpm [ 194s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.28-1.9.aarch64.rpm [ 194s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.28-1.9.aarch64.rpm [ 194s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.28-1.9.aarch64.rpm [ 195s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.28-1.9.aarch64.rpm [ 196s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.28-1.9.aarch64.rpm [ 196s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.28-1.9.aarch64.rpm [ 196s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.28-1.9.aarch64.rpm [ 196s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9wgU3q [ 196s] + umask 022 [ 196s] + cd /home/abuild/rpmbuild/BUILD [ 196s] + cd xmlsec1-1.2.28 [ 196s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/xmlsec1-1.2.28-1.9.aarch64 [ 196s] + exit 0 [ 196s] ... checking for files with abuild user/group [ 196s] ... creating baselibs [ 197s] ... comparing built packages with the former built [ 197s] /usr/lib/build/pkg-diff.sh [ 197s] compare /.build.oldpackages/xmlsec1-1.2.28-1.8.src.rpm /home/abuild/rpmbuild/SRPMS/xmlsec1-1.2.28-1.9.src.rpm [ 197s] This is not a prerelease project. Compare the project name. [ 197s] comparing rpmtags [ 197s] comparing RELEASE [ 197s] comparing PROVIDES [ 197s] comparing scripts [ 198s] comparing filelist [ 198s] comparing file checksum [ 198s] RPM meta information is identical [ 198s] compare /.build.oldpackages/xmlsec1-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-1.2.28-1.9.aarch64.rpm [ 198s] Comparing xmlsec1-1.2.28-1.8.aarch64.rpm to xmlsec1-1.2.28-1.9.aarch64.rpm [ 198s] This is not a prerelease project. Compare the project name. [ 198s] comparing rpmtags [ 198s] comparing RELEASE [ 198s] comparing PROVIDES [ 198s] comparing scripts [ 198s] comparing filelist [ 198s] comparing file checksum [ 198s] creating rename script [ 198s] RPM file checksum differs. [ 198s] Extracting packages [ 199s] /usr/bin/xmlsec1: only difference was in build-id or gnu_debuglink, GOOD. [ 202s] /usr/lib64/libxmlsec1.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 202s] Package content is identical [ 202s] compare /.build.oldpackages/xmlsec1-debuginfo-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debuginfo-1.2.28-1.9.aarch64.rpm [ 202s] skipping -debuginfo package [ 202s] compare /.build.oldpackages/xmlsec1-debugsource-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-debugsource-1.2.28-1.9.aarch64.rpm [ 202s] Comparing xmlsec1-debugsource-1.2.28-1.8.aarch64.rpm to xmlsec1-debugsource-1.2.28-1.9.aarch64.rpm [ 202s] This is not a prerelease project. Compare the project name. [ 202s] comparing rpmtags [ 202s] comparing RELEASE [ 202s] comparing PROVIDES [ 202s] comparing scripts [ 202s] comparing filelist [ 203s] comparing file checksum [ 203s] creating rename script [ 203s] RPM meta information is identical [ 203s] compare /.build.oldpackages/xmlsec1-devel-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-1.2.28-1.9.aarch64.rpm [ 203s] Comparing xmlsec1-devel-1.2.28-1.8.aarch64.rpm to xmlsec1-devel-1.2.28-1.9.aarch64.rpm [ 203s] This is not a prerelease project. Compare the project name. [ 203s] comparing rpmtags [ 203s] comparing RELEASE [ 203s] comparing PROVIDES [ 203s] comparing scripts [ 203s] comparing filelist [ 203s] comparing file checksum [ 203s] creating rename script [ 204s] RPM meta information is identical [ 204s] compare /.build.oldpackages/xmlsec1-devel-static-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-devel-static-1.2.28-1.9.aarch64.rpm [ 204s] Comparing xmlsec1-devel-static-1.2.28-1.8.aarch64.rpm to xmlsec1-devel-static-1.2.28-1.9.aarch64.rpm [ 204s] This is not a prerelease project. Compare the project name. [ 204s] comparing rpmtags [ 204s] comparing RELEASE [ 204s] comparing PROVIDES [ 204s] comparing scripts [ 204s] comparing filelist [ 204s] comparing file checksum [ 204s] creating rename script [ 204s] RPM file checksum differs. [ 204s] Extracting packages [ 204s] /usr/lib64/libxmlsec1_gcrypt_la-app.o differs in ELF section .comment [ 204s] --- /tmp/tmp.hIDty10925/tmp.ncUCN11886 2025-05-13 13:09:44.788286160 +0900 [ 204s] +++ /tmp/tmp.hIDty10925/tmp.OAeET11924 2025-05-13 13:09:44.792286160 +0900 [ 204s] @@ -4,4 +4,4 @@ [ 204s] Contents of section .comment: [ 204s] 0000 00474343 3a202854 697a656e 20474343 .GCC: (Tizen GCC [ 204s] 0010 20392e32 2e302032 30313930 38313220 9.2.0 20190812 [ 204s] - 0020 312e3929 20392e32 2e3000 1.9) 9.2.0. [ 204s] + 0020 312e3130 2920392e 322e3000 1.10) 9.2.0. [ 204s] compare /.build.oldpackages/xmlsec1-gcrypt-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-1.2.28-1.9.aarch64.rpm [ 204s] Comparing xmlsec1-gcrypt-1.2.28-1.8.aarch64.rpm to xmlsec1-gcrypt-1.2.28-1.9.aarch64.rpm [ 205s] This is not a prerelease project. Compare the project name. [ 205s] comparing rpmtags [ 205s] comparing RELEASE [ 205s] comparing PROVIDES [ 205s] comparing scripts [ 205s] comparing filelist [ 205s] comparing file checksum [ 205s] creating rename script [ 205s] RPM file checksum differs. [ 205s] Extracting packages [ 205s] /usr/lib64/libxmlsec1-gcrypt.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 205s] Package content is identical [ 205s] compare /.build.oldpackages/xmlsec1-gcrypt-debuginfo-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-gcrypt-debuginfo-1.2.28-1.9.aarch64.rpm [ 205s] skipping -debuginfo package [ 205s] compare /.build.oldpackages/xmlsec1-openssl-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-1.2.28-1.9.aarch64.rpm [ 206s] Comparing xmlsec1-openssl-1.2.28-1.8.aarch64.rpm to xmlsec1-openssl-1.2.28-1.9.aarch64.rpm [ 206s] This is not a prerelease project. Compare the project name. [ 206s] comparing rpmtags [ 206s] comparing RELEASE [ 206s] comparing PROVIDES [ 206s] comparing scripts [ 206s] comparing filelist [ 206s] comparing file checksum [ 206s] creating rename script [ 206s] RPM file checksum differs. [ 206s] Extracting packages [ 207s] /usr/lib64/libxmlsec1-openssl.so.1.2.28: only difference was in build-id or gnu_debuglink, GOOD. [ 207s] Package content is identical [ 207s] compare /.build.oldpackages/xmlsec1-openssl-debuginfo-1.2.28-1.8.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/xmlsec1-openssl-debuginfo-1.2.28-1.9.aarch64.rpm [ 207s] skipping -debuginfo package [ 207s] [ 207s] 612cb55fbcfc finished "build xmlsec1.spec" at Tue May 13 04:09:47 UTC 2025. [ 207s]