[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] f01b07562d64 started "build kmod.spec" at Mon May 20 10:02:19 UTC 2024. [ 0s] [ 0s] Building kmod for project 'Tizen-7.0-Base' repository 'standard' arch 'armv7hl' srcmd5 '305c5581b1061599d7eef87e052f25cf' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/kmod.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/kmod.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/2/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.2/.build-srcdir/kmod.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling bash... [ 2s] [8/41] preinstalling diffutils... [ 2s] [9/41] preinstalling grep... [ 2s] [10/41] preinstalling libattr... [ 2s] [11/41] preinstalling libblkid... [ 2s] [12/41] preinstalling libbz2... [ 2s] [13/41] preinstalling libcap... [ 2s] [14/41] preinstalling libfreebl3... [ 2s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 11s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 14s] [28/41] preinstalling coreutils... [ 14s] [29/41] preinstalling libacl... [ 14s] [30/41] preinstalling libelf... [ 14s] [31/41] preinstalling libmount... [ 14s] [32/41] preinstalling smack... [ 14s] [33/41] preinstalling bzip2... [ 14s] [34/41] preinstalling libmagic... [ 14s] [35/41] preinstalling libxml2... [ 14s] [36/41] preinstalling tar... [ 14s] [37/41] preinstalling util-linux... [ 14s] [38/41] preinstalling util-linux-su... [ 14s] [39/41] preinstalling nss... [ 15s] [40/41] preinstalling libsoftokn3... [ 15s] [41/41] preinstalling rpm... [ 15s] running qemu-linux-user-x86_64-cross postinstall script [ 16s] running qemu-accel-x86_64-armv7hl postinstall script [ 16s] running setup postinstall script [ 16s] chroot: failed to run command '': No such file or directory [ 16s] initializing rpm db... [ 16s] reordering...cycle: libsoftokn3 -> nss [ 16s] breaking dependency nss -> libsoftokn3 [ 16s] done [ 16s] querying package ids... [ 17s] [1/96] cumulate libmagic-data-5.41-1.12 [ 17s] [2/96] cumulate setup-0.9-1.4 [ 17s] [3/96] cumulate filesystem-3.1-1.1 [ 17s] [4/96] cumulate glibc-2.30-1.16 [ 17s] [5/96] cumulate libatomic-9.2.0-1.17 [ 17s] [6/96] cumulate libgcc-9.2.0-1.17 [ 17s] [7/96] cumulate bash-3.2.57-1.1 [ 17s] [8/96] cumulate cpio-2.8-1.1 [ 17s] [9/96] cumulate diffutils-3.3-1.1 [ 17s] [10/96] cumulate findutils-4.3.8-1.13 [ 17s] [11/96] cumulate gdbm-1.8.3-1.17 [ 17s] [12/96] cumulate hostname-3.23-1.1 [ 17s] [13/96] cumulate libattr-2.5.1-1.13 [ 17s] [14/96] cumulate libblkid-2.37.4-2.2 [ 17s] [15/96] cumulate libbz2-1.0.8-1.13 [ 17s] [16/96] cumulate libcap-2.24-1.12 [ 17s] [17/96] cumulate libfreebl3-3.98-1.4 [ 17s] [18/96] cumulate libgfortran-9.2.0-1.17 [ 17s] [19/96] cumulate libgomp-9.2.0-1.17 [ 17s] [20/96] cumulate libitm-9.2.0-1.17 [ 17s] [21/96] cumulate libltdl-2.4.6-1.17 [ 17s] [22/96] cumulate liblua-5.1.5-1.12 [ 17s] [23/96] cumulate liblzma-5.2.5-1.16 [ 17s] [24/96] cumulate libopenssl11-1.1.1t-2.6 [ 17s] [25/96] cumulate libpcre-8.45-1.5 [ 17s] [26/96] cumulate libpopt-1.16-1.12 [ 17s] [27/96] cumulate libsmack-1.3.1-1.12 [ 17s] [28/96] cumulate libsmartcols-2.37.4-2.2 [ 17s] [29/96] cumulate libsqlite-3.39.0-1.13 [ 17s] [30/96] cumulate libstdc++-9.2.0-1.17 [ 17s] [31/96] cumulate libuuid-2.37.4-2.2 [ 17s] [32/96] cumulate libzstd1-1.4.5-1.14 [ 17s] [33/96] cumulate m4-1.4.19-1.1 [ 17s] [34/96] cumulate net-tools-2.0_20121208git-1.3 [ 17s] [35/96] cumulate nspr-4.35-1.12 [ 17s] [36/96] cumulate patch-2.7.6-1.12 [ 17s] [37/96] cumulate pkg-config-0.29.2-1.16 [ 17s] [38/96] cumulate sed-4.1c-1.1 [ 17s] [39/96] cumulate update-alternatives-1.21.18-1.1 [ 17s] [40/96] cumulate which-2.17-1.1 [ 17s] [41/96] cumulate zlib-1.3-1.4 [ 17s] [42/96] cumulate build-compare-2015.04.28-1.8 [ 17s] [43/96] cumulate libstdc++-devel-9.2.0-1.17 [ 17s] [44/96] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.9 [ 17s] [45/96] cumulate terminfo-base-full-6.2-1.17 [ 17s] [46/96] cumulate cpp-9.2.0-1.17 [ 17s] [47/96] cumulate gcc-c++-9.2.0-1.17 [ 17s] [48/96] cumulate xz-devel-5.2.5-1.16 [ 17s] [49/96] cumulate binutils-2.33.1-1.17 [ 17s] [50/96] cumulate coreutils-6.9-14.7 [ 17s] [51/96] cumulate gawk-3.1.5-1.1 [ 17s] [52/96] cumulate grep-2.5.2-1.1 [ 17s] [53/96] cumulate libacl-2.2.53-1.12 [ 17s] [54/96] cumulate libcc1-9.2.0-1.17 [ 17s] [55/96] cumulate libelf-0.178-1.17 [ 17s] [56/96] cumulate libmount-2.37.4-2.2 [ 17s] [57/96] cumulate libubsan-9.2.0-1.17 [ 17s] [58/96] cumulate make-4.3-1.14 [ 17s] [59/96] cumulate nss-certs-3.98-1.4 [ 17s] [60/96] cumulate smack-1.3.1-1.12 [ 17s] [61/96] cumulate bzip2-1.0.8-1.13 [ 17s] [62/96] cumulate libfdisk-2.37.4-2.2 [ 17s] [63/96] cumulate libmagic-5.41-1.12 [ 17s] [64/96] cumulate libxml2-2.10.2-1.15 [ 17s] [65/96] cumulate perl-5.34.0-1.13 [ 17s] [66/96] cumulate xz-5.2.5-1.16 [ 17s] [67/96] cumulate build-mkbaselibs-20120927-1.1 [ 17s] [68/96] cumulate linux-glibc-devel-3.10-1.16 [ 17s] [69/96] cumulate autoconf-2.71-1.17 [ 17s] [70/96] cumulate file-5.41-1.12 [ 17s] [71/96] cumulate glibc-locale-2.30-1.16 [ 17s] [72/96] cumulate tar-1.17-1.1 [ 17s] [73/96] cumulate gzip-1.3.12-1.12 [ 17s] [74/96] cumulate libncurses6-6.2-1.17 [ 17s] [75/96] cumulate pam-1.1.6-2.3 [ 17s] [76/96] cumulate tzdata-2023c-1.1 [ 17s] [77/96] cumulate libdw-0.178-1.17 [ 17s] [78/96] cumulate libarchive-3.5.2-1.15 [ 17s] [79/96] cumulate gcc-9.2.0-1.17 [ 17s] [80/96] cumulate libncurses-6.2-1.17 [ 17s] [81/96] cumulate glibc-devel-2.30-1.16 [ 17s] [82/96] cumulate qemu-accel-x86_64-armv7hl-0.4-2.5 [ 17s] [83/96] cumulate automake-1.16.4-1.16 [ 17s] [84/96] cumulate less-466-1.1 [ 17s] [85/96] cumulate libreadline-5.2-1.14 [ 17s] [86/96] cumulate libasm-0.178-1.17 [ 17s] [87/96] cumulate build-20120927-1.1 [ 17s] [88/96] cumulate zlib-devel-1.3-1.4 [ 17s] [89/96] cumulate libtool-2.4.6-1.17 [ 17s] [90/96] cumulate elfutils-0.178-1.17 [ 17s] [91/96] cumulate util-linux-2.37.4-2.2 [ 17s] [92/96] cumulate util-linux-su-2.37.4-2.2 [ 17s] [93/96] cumulate nss-3.98-1.4 [ 17s] [94/96] cumulate libsoftokn3-3.98-1.4 [ 17s] [95/96] cumulate rpm-4.14.1.1-2.7 [ 17s] [96/96] cumulate rpm-build-4.14.1.1-2.7 [ 17s] now installing cumulated packages [ 17s] Preparing... ######################################## [ 17s] Updating / installing... [ 17s] setup-0.9-1.4 ######################################## [ 17s] filesystem-3.1-1.1 ######################################## [ 18s] libmagic-data-5.41-1.12 ######################################## [ 18s] glibc-2.30-1.16 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 18s] ######################################## [ 19s] libgcc-9.2.0-1.17 ######################################## [ 19s] bash-3.2.57-1.1 ######################################## [ 19s] zlib-1.3-1.4 ######################################## [ 19s] liblzma-5.2.5-1.16 ######################################## [ 19s] libstdc++-9.2.0-1.17 ######################################## [ 20s] libbz2-1.0.8-1.13 ######################################## [ 20s] libelf-0.178-1.17 ######################################## [ 21s] coreutils-6.9-14.7 ######################################## [ 21s] libdw-0.178-1.17 ######################################## [ 21s] libmagic-5.41-1.12 ######################################## [ 21s] libblkid-2.37.4-2.2 ######################################## [ 22s] nspr-4.35-1.12 ######################################## [ 22s] pam-1.1.6-2.3 ######################################## [ 23s] binutils-2.33.1-1.17 ######################################## [ 23s] libcap-2.24-1.12 ######################################## [ 23s] libfreebl3-3.98-1.4 ######################################## [ 23s] liblua-5.1.5-1.12 ######################################## [ 24s] libpopt-1.16-1.12 ######################################## [ 24s] libuuid-2.37.4-2.2 ######################################## [ 24s] libzstd1-1.4.5-1.14 ######################################## [ 25s] pkg-config-0.29.2-1.16 ######################################## [ 25s] linux-glibc-devel-3.10-1.16 ######################################## [ 25s] terminfo-base-full-6.2-1.17 ######################################## [ 26s] libncurses6-6.2-1.17 ######################################## [ 26s] glibc-devel-2.30-1.16 ######################################## [ 26s] libreadline-5.2-1.14 ######################################## [ 26s] libfdisk-2.37.4-2.2 ######################################## [ 26s] nss-certs-3.98-1.4 ######################################## [ 27s] libmount-2.37.4-2.2 ######################################## [ 27s] libasm-0.178-1.17 ######################################## [ 27s] gzip-1.3.12-1.12 ######################################## [ 27s] bzip2-1.0.8-1.13 ######################################## [ 27s] libcc1-9.2.0-1.17 ######################################## [ 27s] libubsan-9.2.0-1.17 ######################################## [ 28s] libxml2-2.10.2-1.15 ######################################## [ 28s] xz-5.2.5-1.16 ######################################## [ 28s] make-4.3-1.14 ######################################## [ 28s] findutils-4.3.8-1.13 ######################################## [ 28s] gdbm-1.8.3-1.17 ######################################## [ 32s] perl-5.34.0-1.13 ######################################## [ 32s] build-mkbaselibs-20120927-1.1 ######################################## [ 32s] libattr-2.5.1-1.13 ######################################## [ 33s] libacl-2.2.53-1.12 ######################################## [ 33s] tar-1.17-1.1 ######################################## [ 33s] libgfortran-9.2.0-1.17 ######################################## [ 33s] libgomp-9.2.0-1.17 ######################################## [ 34s] libitm-9.2.0-1.17 ######################################## [ 34s] libltdl-2.4.6-1.17 ######################################## [ 34s] libopenssl11-1.1.1t-2.6 ######################################## [ 35s] libarchive-3.5.2-1.15 ######################################## [ 35s] libpcre-8.45-1.5 ######################################## [ 35s] libsmack-1.3.1-1.12 ######################################## [ 35s] libsmartcols-2.37.4-2.2 ######################################## [ 36s] libsqlite-3.39.0-1.13 ######################################## [ 36s] libsoftokn3-3.98-1.4 ######################################## [ 36s] nss-3.98-1.4 ######################################## [ 37s] rpm-4.14.1.1-2.7 ######################################## [ 38s] m4-1.4.19-1.1 ######################################## [ 38s] autoconf-2.71-1.17 ######################################## [ 38s] automake-1.16.4-1.16 ######################################## [ 39s] patch-2.7.6-1.12 ######################################## [ 39s] sed-4.1c-1.1 ######################################## [ 40s] util-linux-2.37.4-2.2 ######################################## [ 40s] libatomic-9.2.0-1.17 ######################################## [ 41s] libtool-2.4.6-1.17 ######################################## [ 41s] build-20120927-1.1 ######################################## [ 41s] zlib-devel-1.3-1.4 ######################################## [ 41s] libncurses-6.2-1.17 ######################################## [ 41s] xz-devel-5.2.5-1.16 ######################################## [ 42s] libstdc++-devel-9.2.0-1.17 ######################################## [ 42s] build-compare-2015.04.28-1.8 ######################################## [ 48s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 50s] gcc-9.2.0-1.17 ######################################## [ 63s] qemu-accel-x86_64-armv7hl-0.4-2.5 ######################################## [ 64s] rpm-build-4.14.1.1-2.7 ######################################## [ 64s] util-linux-su-2.37.4-2.2 ######################################## [ 64s] smack-1.3.1-1.12 ######################################## [ 64s] grep-2.5.2-1.1 ######################################## [ 64s] elfutils-0.178-1.17 ######################################## [ 64s] less-466-1.1 ######################################## [ 64s] file-5.41-1.12 ######################################## [ 64s] glibc-locale-2.30-1.16 ######################################## [ 65s] tzdata-2023c-1.1 ######################################## [ 66s] cpp-9.2.0-1.17 ######################################## [ 67s] gcc-c++-9.2.0-1.17 ######################################## [ 67s] gawk-3.1.5-1.1 ######################################## [ 67s] cpio-2.8-1.1 ######################################## [ 67s] diffutils-3.3-1.1 ######################################## [ 67s] hostname-3.23-1.1 ######################################## [ 67s] net-tools-2.0_20121208git-1.3 ######################################## [ 67s] update-alternatives-1.21.18-1.1 ######################################## [ 67s] which-2.17-1.1 ######################################## [ 67s] now finalizing build dir... [ 68s] ----------------------------------------------------------------- [ 68s] I have the following modifications for kmod.spec: [ 68s] 5c5 [ 68s] < Release: 0 [ 68s] --- [ 68s] > Release: 1.2 [ 68s] 145a146 [ 68s] > %changelog [ 68s] build target is armv7hl-tizen-linux [ 68s] ----------------------------------------------------------------- [ 68s] ----- building kmod.spec (user abuild) [ 68s] ----------------------------------------------------------------- [ 68s] ----------------------------------------------------------------- [ 69s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-7.0-Base/standard/305c5581b1061599d7eef87e052f25cf-kmod' /home/abuild/rpmbuild/SOURCES/kmod.spec [ 69s] Building target platforms: armv7hl-tizen-linux [ 69s] Building for target armv7hl-tizen-linux [ 69s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Puxo4q [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + rm -rf kmod-30 [ 69s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/kmod-30.tar.xz [ 69s] + /bin/tar -xof - [ 69s] + STATUS=0 [ 69s] + '[' 0 -ne 0 ']' [ 69s] + cd kmod-30 [ 69s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 69s] + echo 'Patch #0 (0001-testsuite-repair-read-of-uninitialized-memory.patch):' [ 69s] Patch #0 (0001-testsuite-repair-read-of-uninitialized-memory.patch): [ 69s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 69s] patching file testsuite/test-util.c [ 69s] + echo 'Patch #1 (0002-build-enable-building-running-tests-from-a-subdir.patch):' [ 69s] Patch #1 (0002-build-enable-building-running-tests-from-a-subdir.patch): [ 69s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 69s] patching file Makefile.am [ 69s] + echo 'Patch #2 (0003-modprobe-Write-error-messages-to-syslog-if-stderr-is.patch):' [ 69s] Patch #2 (0003-modprobe-Write-error-messages-to-syslog-if-stderr-is.patch): [ 69s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 69s] patching file tools/modprobe.c [ 69s] + echo 'Patch #3 (0004-Add-lib-modules-modprobe.d-to-configuration-search-p.patch):' [ 69s] Patch #3 (0004-Add-lib-modules-modprobe.d-to-configuration-search-p.patch): [ 69s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 69s] patching file libkmod/libkmod.c [ 69s] patching file man/modprobe.d.xml [ 69s] + cp /home/abuild/rpmbuild/SOURCES/kmod.manifest . [ 69s] + exit 0 [ 69s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.VG9cZq [ 69s] + umask 022 [ 69s] + cd /home/abuild/rpmbuild/BUILD [ 69s] + cd kmod-30 [ 69s] ++ uname -m [ 69s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 69s] + LANG=C [ 69s] + export LANG [ 69s] + unset DISPLAY [ 69s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + LDFLAGS= [ 69s] + export LDFLAGS [ 69s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 69s] + export CFLAGS [ 69s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 69s] + export CXXFLAGS [ 69s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 69s] + export FFLAGS [ 69s] + ./autogen.sh --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 69s] ./autogen.sh: line 9: gtkdocize: command not found [ 79s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 79s] libtoolize: linking file 'build-aux/ltmain.sh' [ 79s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 79s] libtoolize: linking file 'm4/libtool.m4' [ 79s] libtoolize: linking file 'm4/ltoptions.m4' [ 79s] libtoolize: linking file 'm4/ltsugar.m4' [ 79s] libtoolize: linking file 'm4/ltversion.m4' [ 79s] libtoolize: linking file 'm4/lt~obsolete.m4' [ 85s] configure.ac:35: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 85s] configure.ac:35: You should run autoupdate. [ 85s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 85s] configure.ac:35: the top level [ 91s] configure.ac:13: installing 'build-aux/compile' [ 91s] configure.ac:19: installing 'build-aux/config.guess' [ 91s] configure.ac:19: installing 'build-aux/config.sub' [ 91s] configure.ac:17: installing 'build-aux/install-sh' [ 91s] configure.ac:17: installing 'build-aux/missing' [ 91s] Makefile.am: installing 'build-aux/depcomp' [ 91s] Makefile.am:230: installing 'build-aux/py-compile' [ 91s] parallel-tests: installing 'build-aux/test-driver' [ 92s] [ 92s] ---------------------------------------------------------------- [ 92s] Initialized build system. For a common configuration please run: [ 92s] ---------------------------------------------------------------- [ 92s] [ 92s] ./configure CFLAGS='-g -O2' --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib [ 92s] [ 92s] If you are debugging or hacking on kmod, consider configuring [ 92s] like below: [ 92s] [ 92s] ./configure CFLAGS='-g -O2' --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib --enable-debug --enable-python --with-zstd --with-xz --with-zlib --with-openssl [ 92s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CFLAGS [ 92s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 92s] + export CXXFLAGS [ 92s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 92s] + export FFLAGS [ 92s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-xz --disable-manpages --with-zlib --with-rootlibdir=/usr/lib --bindir=/usr/bin [ 93s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 93s] checking whether the C compiler works... yes [ 93s] checking for C compiler default output file name... a.out [ 93s] checking for suffix of executables... [ 93s] checking whether we are cross compiling... no [ 93s] checking for suffix of object files... o [ 93s] checking whether the compiler supports GNU C... yes [ 93s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 93s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to enable C11 features... none needed [ 94s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 94s] checking for stdio.h... yes [ 94s] checking for stdlib.h... yes [ 94s] checking for string.h... yes [ 94s] checking for inttypes.h... yes [ 94s] checking for stdint.h... yes [ 94s] checking for strings.h... yes [ 94s] checking for sys/stat.h... yes [ 94s] checking for sys/types.h... yes [ 94s] checking for unistd.h... yes [ 94s] checking for wchar.h... yes [ 94s] checking for minix/config.h... no [ 95s] checking for linux/module.h... no [ 95s] checking whether it is safe to define __EXTENSIONS__... yes [ 95s] checking whether _XOPEN_SOURCE should be defined... no [ 95s] checking for special C compiler options needed for large files... no [ 95s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 95s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 95s] checking for a BSD-compatible install... /bin/install -c [ 95s] checking whether build environment is sane... yes [ 95s] checking for a race-free mkdir -p... /bin/mkdir -p [ 95s] checking for gawk... gawk [ 95s] checking whether make sets $(MAKE)... yes [ 95s] checking whether make supports the include directive... yes (GNU style) [ 95s] checking whether make supports nested variables... yes [ 96s] checking how to create a pax tar archive... gnutar [ 96s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 96s] checking whether make supports nested variables... (cached) yes [ 96s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 97s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 97s] checking how to print strings... printf [ 97s] checking for a sed that does not truncate output... /bin/sed [ 97s] checking for grep that handles long lines and -e... /bin/grep [ 97s] checking for egrep... /bin/grep -E [ 97s] checking for fgrep... /bin/grep -F [ 97s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 97s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 97s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 97s] checking the name lister (/bin/nm -B) interface... BSD nm [ 97s] checking whether ln -s works... yes [ 97s] checking the maximum length of command line arguments... 1572864 [ 97s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 97s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 97s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 97s] checking for armv7hl-tizen-linux-gnueabihf-objdump... no [ 97s] checking for objdump... objdump [ 97s] checking how to recognize dependent libraries... pass_all [ 97s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... no [ 97s] checking for dlltool... no [ 97s] checking how to associate runtime and link libraries... printf %s\n [ 97s] checking for armv7hl-tizen-linux-gnueabihf-ar... no [ 97s] checking for ar... ar [ 97s] checking for archiver @FILE support... @ [ 97s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 97s] checking for strip... strip [ 97s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... no [ 97s] checking for ranlib... ranlib [ 97s] checking command to parse /bin/nm -B output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 97s] checking for sysroot... no [ 97s] checking for a working dd... /bin/dd [ 98s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 98s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 98s] checking for mt... no [ 98s] checking if : is a manifest tool... no [ 98s] checking for dlfcn.h... yes [ 98s] checking for objdir... .libs [ 98s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 98s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 98s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 98s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 98s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 98s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 99s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 99s] checking whether -lc should be explicitly linked in... no [ 99s] checking dynamic linker characteristics... GNU/Linux ld.so [ 99s] checking how to hardcode library paths into programs... immediate [ 99s] checking whether stripping libraries is possible... yes [ 99s] checking if libtool supports shared libraries... yes [ 99s] checking whether to build shared libraries... yes [ 99s] checking whether to build static libraries... no [ 99s] checking for a sed that does not truncate output... (cached) /bin/sed [ 99s] checking whether ln -s works... yes [ 99s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 99s] checking pkg-config is at least version 0.9.0... yes [ 99s] checking for xsltproc... no [ 99s] checking for mkosi... no [ 99s] checking for __xstat... yes [ 100s] checking for __secure_getenv... no [ 100s] checking for secure_getenv... yes [ 100s] checking for finit_module... no [ 100s] checking if compiler has __builtin_clz builtin function... yes [ 100s] checking if compiler has __builtin_types_compatible_p builtin function... yes [ 100s] checking if compiler has __builtin_uaddl_overflow builtin function... yes [ 100s] checking if compiler has __builtin_uaddll_overflow builtin function... yes [ 101s] checking for struct stat.st_mtim... yes [ 101s] checking for armv7hl-tizen-linux-gnueabihf-gcc options needed to detect all undeclared functions... none needed [ 101s] checking whether strndupa is declared... yes [ 101s] checking whether be32toh is declared... yes [ 101s] checking whether _Static_assert() is supported... yes [ 101s] checking whether _Noreturn is supported... yes [ 101s] configure: Zstandard support not requested [ 101s] checking for liblzma >= 4.99... yes [ 102s] checking for zlib... yes [ 102s] configure: openssl support not requested [ 102s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -pipe in envvar CFLAGS... yes [ 102s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -DANOTHER_BRICK_IN_THE in envvar CFLAGS... yes [ 102s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wall in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -W in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wextra in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-inline in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wvla in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wundef in envvar CFLAGS... yes [ 103s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wformat=2 in envvar CFLAGS... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wlogical-op in envvar CFLAGS... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wsign-compare in envvar CFLAGS... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wformat-security in envvar CFLAGS... no [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wmissing-include-dirs in envvar CFLAGS... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wformat-nonliteral in envvar CFLAGS... no [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wold-style-definition in envvar CFLAGS... yes [ 104s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wpointer-arith in envvar CFLAGS... yes [ 105s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Winit-self in envvar CFLAGS... yes [ 105s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wdeclaration-after-statement in envvar CFLAGS... yes [ 105s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wfloat-equal in envvar CFLAGS... yes [ 105s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wmissing-prototypes in envvar CFLAGS... yes [ 106s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wstrict-prototypes in envvar CFLAGS... yes [ 106s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wredundant-decls in envvar CFLAGS... yes [ 106s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wmissing-declarations in envvar CFLAGS... yes [ 106s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wmissing-noreturn in envvar CFLAGS... yes [ 106s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wshadow in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wendif-labels in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wstrict-aliasing=3 in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wwrite-strings in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-long-long in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-overlength-strings in envvar CFLAGS... yes [ 107s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-unused-parameter in envvar CFLAGS... yes [ 108s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-missing-field-initializers in envvar CFLAGS... yes [ 108s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wno-unused-result in envvar CFLAGS... yes [ 108s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wnested-externs in envvar CFLAGS... yes [ 108s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wchar-subscripts in envvar CFLAGS... yes [ 108s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wtype-limits in envvar CFLAGS... yes [ 109s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wuninitialized in envvar CFLAGS... yes [ 109s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -fno-common in envvar CFLAGS... yes [ 109s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -fdiagnostics-show-option in envvar CFLAGS... yes [ 109s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -fvisibility=hidden in envvar CFLAGS... yes [ 109s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -ffunction-sections in envvar CFLAGS... yes [ 110s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -fdata-sections in envvar CFLAGS... yes [ 110s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wl,--as-needed in envvar LDFLAGS... yes [ 110s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wl,--no-undefined in envvar LDFLAGS... yes [ 110s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports flag -Wl,--gc-sections in envvar LDFLAGS... yes [ 110s] checking that generated files are newer than configure... done [ 110s] configure: creating ./config.status [ 112s] config.status: creating Makefile [ 112s] config.status: creating man/Makefile [ 113s] config.status: creating libkmod/docs/Makefile [ 113s] config.status: creating libkmod/docs/version.xml [ 113s] config.status: creating config.h [ 113s] config.status: executing depfiles commands [ 116s] config.status: executing libtool commands [ 116s] [ 116s] kmod 30 [ 116s] ======= [ 116s] [ 116s] prefix: /usr [ 116s] sysconfdir: /etc [ 116s] libdir: /usr/lib [ 116s] rootlibdir: /usr/lib [ 116s] includedir: /usr/include [ 116s] bindir: /usr/bin [ 116s] Bash completions dir: /usr/share/bash-completion/completions [ 116s] [ 116s] compiler: armv7hl-tizen-linux-gnueabihf-gcc [ 116s] cflags: -pipe -DANOTHER_BRICK_IN_THE -Wall -W -Wextra -Wno-inline -Wvla -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wmissing-include-dirs -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wstrict-aliasing=3 -Wwrite-strings -Wno-long-long -Wno-overlength-strings -Wno-unused-parameter -Wno-missing-field-initializers -Wno-unused-result -Wnested-externs -Wchar-subscripts -Wtype-limits -Wuninitialized -fno-common -fdiagnostics-show-option -fvisibility=hidden -ffunction-sections -fdata-sections -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g [ 116s] ldflags: -Wl,--as-needed -Wl,--no-undefined -Wl,--gc-sections [ 116s] [ 116s] experimental features: no [ 116s] tools: yes [ 116s] python bindings: no [ 116s] logging: yes [ 116s] compression: zstd=no xz=yes zlib=yes [ 116s] debug: no [ 116s] coverage: no [ 116s] doc: [ 116s] man: no [ 116s] test-modules: yes [ 116s] [ 116s] features: -ZSTD +XZ +ZLIB -LIBCRYPTO -EXPERIMENTAL [ 116s] [ 116s] + /bin/make -j12 'CFLAGS+= -fPIE -Wno-maybe-uninitialized' 'LDFLAGS+= -pie' [ 116s] /bin/make --no-print-directory all-recursive [ 116s] Making all in . [ 116s] GEN libkmod/libkmod.pc [ 116s] CC tools/rmmod.o [ 116s] CC tools/depmod.o [ 116s] CC tools/lsmod.o [ 116s] CC tools/insmod.o [ 116s] CC tools/kmod.o [ 116s] CC tools/log.o [ 117s] CC tools/modprobe.o [ 117s] CC tools/modinfo.o [ 117s] CC tools/static-nodes.o [ 117s] CC shared/array.lo [ 117s] CC shared/hash.lo [ 117s] CC shared/scratchbuf.lo [ 117s] CC shared/strbuf.lo [ 117s] CC shared/util.lo [ 117s] CC libkmod/libkmod.lo [ 117s] CC libkmod/libkmod-list.lo [ 117s] CC libkmod/libkmod-builtin.lo [ 117s] CC libkmod/libkmod-index.lo [ 117s] CC libkmod/libkmod-config.lo [ 117s] CC libkmod/libkmod-module.lo [ 117s] CC libkmod/libkmod-file.lo [ 118s] CC libkmod/libkmod-elf.lo [ 118s] CC libkmod/libkmod-signature.lo [ 118s] CCLD shared/libshared.la [ 120s] CCLD libkmod/libkmod-internal.la [ 120s] CCLD libkmod/libkmod.la [ 122s] CCLD tools/kmod [ 123s] GEN tools/insmod [ 123s] GEN tools/depmod [ 123s] GEN tools/modprobe [ 123s] GEN tools/modinfo [ 123s] GEN tools/rmmod [ 123s] GEN tools/lsmod [ 123s] Making all in libkmod/docs [ 123s] make[2]: Nothing to be done for 'all'. [ 123s] + exit 0 [ 123s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.h2hPFo [ 123s] + umask 022 [ 123s] + cd /home/abuild/rpmbuild/BUILD [ 123s] + cd kmod-30 [ 123s] + LANG=C [ 123s] + export LANG [ 123s] + unset DISPLAY [ 123s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm [ 123s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm [ 123s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm install [ 123s] Making install in . [ 124s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib' [ 124s] /bin/sh ./libtool --mode=install /bin/install -c libkmod/libkmod.la '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib' [ 124s] libtool: install: /bin/install -c libkmod/.libs/libkmod.so.2.4.0 /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.so.2.4.0 [ 124s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib && { ln -s -f libkmod.so.2.4.0 libkmod.so.2 || { rm -f libkmod.so.2 && ln -s libkmod.so.2.4.0 libkmod.so.2; }; }) [ 124s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib && { ln -s -f libkmod.so.2.4.0 libkmod.so || { rm -f libkmod.so && ln -s libkmod.so.2.4.0 libkmod.so; }; }) [ 124s] libtool: install: /bin/install -c libkmod/.libs/libkmod.lai /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.la [ 124s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 124s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/bin' [ 124s] /bin/sh ./libtool --mode=install /bin/install -c tools/kmod '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/bin' [ 125s] libtool: install: /bin/install -c tools/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/bin/kmod [ 125s] /bin/make --no-print-directory install-exec-hook [ 125s] if test "/usr/lib" != "/usr/lib"; then \ [ 125s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib && \ [ 125s] so_img_name=$(readlink /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.so) && \ [ 125s] so_img_rel_target_prefix=$(echo /usr/lib | sed 's,$^/\|$[^/][^/]*,..,g') && \ [ 125s] ln -sf $so_img_rel_target_prefix/usr/lib/$so_img_name /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.so && \ [ 125s] mv /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.so.* /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib; \ [ 125s] fi [ 125s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/bash-completion/completions' [ 125s] /bin/install -c -m 644 shell-completion/bash/kmod '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/bash-completion/completions' [ 125s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/include' [ 125s] /bin/install -c -m 644 libkmod/libkmod.h '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/include' [ 125s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/pkgconfig' [ 125s] /bin/install -c -m 644 libkmod/libkmod.pc '/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/pkgconfig' [ 125s] Making install in libkmod/docs [ 125s] make[2]: Nothing to be done for 'install-exec-am'. [ 125s] make[2]: Nothing to be done for 'install-data-am'. [ 125s] + rm -f /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/info/dir [ 125s] + find /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm -regex '.*\.la$' [ 125s] + xargs rm -f -- [ 125s] + xargs rm -f -- [ 125s] + find /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm -regex '.*\.a$' [ 125s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/bin/lsmod [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/depmod [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/insmod [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/lsmod [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/modinfo [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/modprobe [ 125s] + for i in depmod insmod lsmod modinfo modprobe rmmod [ 125s] + ln -sf /usr/bin/kmod /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm//usr/sbin/rmmod [ 125s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 30-1.2 --unique-debug-src-base kmod-30-1.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/kmod-30 [ 126s] 1+0 records in [ 126s] 1+0 records out [ 126s] 1+0 records in [ 126s] 1+0 records out [ 126s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000464382 s, 15.1 kB/s [ 126s] , 0.000457707 s, 15.3 kB/s [ 126s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/bin/kmod [ 126s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/lib/libkmod.so.2.4.0 [ 126s] 0+0 records in [ 126s] 0+0 records out [ 126s] 0 bytes (0 B) copied, 0.000336729 s, 0.0 kB/s [ 126s] 0+0 records in [ 126s] 0+0 records out [ 126s] 0 bytes (0 B) copied, 0.000338083 s, 0.0 kB/s [ 126s] 785 blocks [ 126s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kmod-30/kmod-debuginfo.manifest [ 126s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/kmod-30/kmod-debugsource.manifest [ 126s] + /usr/lib/rpm/check-buildroot [ 127s] + /usr/lib/rpm//brp-compress [ 127s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 127s] + /usr/lib/rpm/brp-python-hardlink [ 127s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm [ 127s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/kmod-30/isu.list [ 127s] ~/rpmbuild/BUILDROOT/kmod-30-1.2.arm ~/rpmbuild/BUILD/kmod-30 [ 127s] ~/rpmbuild/BUILD/kmod-30 [ 127s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.tjvrwn [ 127s] Processing files: kmod-30-1.2.armv7hl [ 127s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 127s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 127s] [ 127s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.dc3jjq [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd kmod-30 [ 127s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod [ 127s] + export LC_ALL=C [ 127s] + LC_ALL=C [ 127s] + export LICENSEDIR [ 127s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod [ 127s] + cp -pr ./tools/COPYING /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod [ 127s] + exit 0 [ 127s] Provides: kmod = 30-1.2 kmod(armv7hl-32) = 30-1.2 [ 127s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 127s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) liblzma.so.5 liblzma.so.5(XZ_5.0) libz.so.1 rtld(GNU_HASH) [ 127s] Processing files: kmod-debugsource-30-1.2.armv7hl [ 127s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 127s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 127s] [ 127s] Provides: kmod-debugsource = 30-1.2 kmod-debugsource(armv7hl-32) = 30-1.2 [ 127s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 127s] Processing files: kmod-compat-30-1.2.armv7hl [ 127s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 127s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 127s] [ 127s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.LFyJOo [ 127s] + umask 022 [ 127s] + cd /home/abuild/rpmbuild/BUILD [ 127s] + cd kmod-30 [ 127s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod-compat [ 127s] + export LC_ALL=C [ 127s] + LC_ALL=C [ 127s] + export LICENSEDIR [ 127s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod-compat [ 127s] + cp -pr ./tools/COPYING /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/kmod-compat [ 127s] + exit 0 [ 127s] Provides: kmod-compat = 30-1.2 kmod-compat(armv7hl-32) = 30-1.2 module-init-tools [ 127s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 127s] Requires(pre): filesystem [ 127s] Processing files: libkmod-30-1.2.armv7hl [ 127s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 127s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 127s] [ 127s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.l2c3tr [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd kmod-30 [ 128s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/libkmod [ 128s] + export LC_ALL=C [ 128s] + LC_ALL=C [ 128s] + export LICENSEDIR [ 128s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/libkmod [ 128s] + cp -pr ./libkmod/COPYING /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm/usr/share/licenses/libkmod [ 128s] + exit 0 [ 128s] Provides: libkmod = 30-1.2 libkmod(armv7hl-32) = 30-1.2 libkmod.so.2 libkmod.so.2(LIBKMOD_22) libkmod.so.2(LIBKMOD_5) libkmod.so.2(LIBKMOD_6) [ 128s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 128s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 128s] Requires(post): /sbin/ldconfig [ 128s] Requires(postun): /sbin/ldconfig [ 128s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.8) libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GCC_3.3.1) libgcc_s.so.1(GCC_3.5) liblzma.so.5 liblzma.so.5(XZ_5.0) libz.so.1 rtld(GNU_HASH) [ 128s] Processing files: libkmod-devel-30-1.2.armv7hl [ 128s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 128s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 128s] [ 128s] Provides: libkmod-devel = 30-1.2 libkmod-devel(armv7hl-32) = 30-1.2 pkgconfig(libkmod) = 30 [ 128s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 128s] Requires: /usr/bin/pkg-config libkmod.so.2 [ 128s] Processing files: kmod-docs-30-1.2.armv7hl [ 128s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/kmod-30/documentation.list [ 128s] Processing files: kmod-debuginfo-30-1.2.armv7hl [ 128s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 128s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 128s] [ 128s] Provides: kmod-debuginfo = 30-1.2 kmod-debuginfo(armv7hl-32) = 30-1.2 [ 128s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 128s] Recommends: kmod-debugsource(armv7hl-32) = 30-1.2 [ 128s] Processing files: libkmod-debuginfo-30-1.2.armv7hl [ 128s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 128s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 128s] [ 128s] Provides: libkmod-debuginfo = 30-1.2 libkmod-debuginfo(armv7hl-32) = 30-1.2 [ 128s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 128s] Recommends: kmod-debugsource(armv7hl-32) = 30-1.2 [ 128s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm [ 128s] Wrote: /home/abuild/rpmbuild/SRPMS/kmod-30-1.2.src.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/kmod-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/kmod-debugsource-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/kmod-compat-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-devel-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/kmod-docs-30-1.2.armv7hl.rpm [ 129s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/kmod-debuginfo-30-1.2.armv7hl.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-debuginfo-30-1.2.armv7hl.rpm [ 130s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.69HnZq [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd kmod-30 [ 130s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/kmod-30-1.2.arm [ 130s] + exit 0 [ 130s] ... checking for files with abuild user/group [ 130s] ... creating baselibs [ 131s] ... comparing built packages with the former built [ 131s] /usr/lib/build/pkg-diff.sh [ 131s] compare /.build.oldpackages/kmod-30-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/kmod-30-1.2.src.rpm [ 131s] This is not a prerelease project. Compare the project name. [ 131s] comparing rpmtags [ 131s] comparing RELEASE [ 131s] comparing PROVIDES [ 131s] comparing scripts [ 131s] comparing filelist [ 131s] comparing file checksum [ 131s] RPM meta information is identical [ 131s] compare /.build.oldpackages/kmod-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/kmod-30-1.2.armv7hl.rpm [ 132s] Comparing kmod-30-1.1.armv7hl.rpm to kmod-30-1.2.armv7hl.rpm [ 132s] This is not a prerelease project. Compare the project name. [ 132s] comparing rpmtags [ 132s] comparing RELEASE [ 132s] comparing PROVIDES [ 132s] comparing scripts [ 132s] comparing filelist [ 132s] comparing file checksum [ 132s] creating rename script [ 132s] RPM file checksum differs. [ 133s] Extracting packages [ 134s] /usr/bin/kmod differs in ELF section .dynsym [ 134s] --- /tmp/tmp.Shdi250065/tmp.cjAy251876 2024-05-20 19:04:33.052620125 +0900 [ 134s] +++ /tmp/tmp.Shdi250065/tmp.GgxV252038 2024-05-20 19:04:33.060620126 +0900 [ 134s] @@ -11,7 +11,7 @@ [ 134s] 022c 5a020000 00000000 00000000 12000000 Z............... [ 134s] 023c 0d030000 00000000 00000000 12000000 ................ [ 134s] 024c d1040000 00000000 00000000 11000000 ................ [ 134s] - 025c 84000000 00000000 00000000 12000000 ................ [ 134s] + 025c 9b000000 00000000 00000000 12000000 ................ [ 134s] 026c 78010000 00000000 00000000 12000000 x............... [ 134s] 027c 73040000 00000000 00000000 12000000 s............... [ 134s] 028c 18040000 00000000 00000000 22000000 ............"... [ 134s] @@ -32,7 +32,7 @@ [ 134s] 037c a9030000 00000000 00000000 12000000 ................ [ 134s] 038c e6020000 00000000 00000000 12000000 ................ [ 134s] 039c 64010000 00000000 00000000 12000000 d............... [ 134s] - 03ac 94000000 00000000 00000000 12000000 ................ [ 134s] + 03ac 8c000000 00000000 00000000 12000000 ................ [ 134s] 03bc 9f010000 00000000 00000000 12000000 ................ [ 134s] 03cc 80020000 00000000 00000000 12000000 ................ [ 134s] 03dc 55040000 00000000 00000000 12000000 U............... [ 134s] @@ -64,7 +64,7 @@ [ 134s] 057c 7a040000 00000000 00000000 12000000 z............... [ 134s] 058c 49030000 00000000 00000000 12000000 I............... [ 134s] 059c d4030000 00000000 00000000 12000000 ................ [ 134s] - 05ac 9c000000 00000000 00000000 12000000 ................ [ 134s] + 05ac 94000000 00000000 00000000 12000000 ................ [ 134s] 05bc 63040000 00000000 00000000 12000000 c............... [ 134s] 05cc c8040000 00000000 00000000 12000000 ................ [ 134s] 05dc 2a000000 00000000 00000000 20000000 *........... ... [ 134s] @@ -88,7 +88,7 @@ [ 134s] 06fc 2f040000 00000000 00000000 12000000 /............... [ 134s] 070c dd000000 00000000 00000000 12000000 ................ [ 134s] 071c c6010000 00000000 00000000 12000000 ................ [ 134s] - 072c 8c000000 00000000 00000000 12000000 ................ [ 134s] + 072c 84000000 00000000 00000000 12000000 ................ [ 134s] 073c 53020000 00000000 00000000 12000000 S............... [ 134s] 074c a5010000 00000000 00000000 12000000 ................ [ 134s] 075c 72030000 00000000 00000000 12000000 r............... [ 134s] /usr/bin/kmod differs in ELF section .dynstr [ 134s] --- /tmp/tmp.Shdi250065/tmp.cjAy251876 2024-05-20 19:04:33.076620126 +0900 [ 134s] +++ /tmp/tmp.Shdi250065/tmp.GgxV252038 2024-05-20 19:04:33.084620127 +0900 [ 134s] @@ -10,9 +10,9 @@ [ 134s] 0a4c 6c65006c 7a6d615f 73747265 616d5f64 le.lzma_stream_d [ 134s] 0a5c 65636f64 6572006c 7a6d615f 656e6400 ecoder.lzma_end. [ 134s] 0a6c 6c7a6d61 5f636f64 65006c69 627a2e73 lzma_code.libz.s [ 134s] - 0a7c 6f2e3100 677a636c 6f736500 677a6572 o.1.gzclose.gzer [ 134s] - 0a8c 726f7200 677a646f 70656e00 677a7265 ror.gzdopen.gzre [ 134s] - 0a9c 6164006c 69626763 635f732e 736f2e31 ad.libgcc_s.so.1 [ 134s] + 0a7c 6f2e3100 677a6572 726f7200 677a646f o.1.gzerror.gzdo [ 134s] + 0a8c 70656e00 677a7265 61640067 7a636c6f pen.gzread.gzclo [ 134s] + 0a9c 7365006c 69626763 635f732e 736f2e31 se.libgcc_s.so.1 [ 134s] 0aac 005f5f67 63635f70 6572736f 6e616c69 .__gcc_personali [ 134s] 0abc 74795f76 30005f5f 61656162 695f756e ty_v0.__aeabi_un [ 134s] 0acc 77696e64 5f637070 5f707230 005f5f61 wind_cpp_pr0.__a [ 135s] compare /.build.oldpackages/kmod-compat-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/kmod-compat-30-1.2.armv7hl.rpm [ 135s] Comparing kmod-compat-30-1.1.armv7hl.rpm to kmod-compat-30-1.2.armv7hl.rpm [ 135s] This is not a prerelease project. Compare the project name. [ 135s] comparing rpmtags [ 135s] comparing RELEASE [ 135s] comparing PROVIDES [ 136s] comparing scripts [ 136s] comparing filelist [ 136s] comparing file checksum [ 136s] creating rename script [ 136s] RPM meta information is identical [ 136s] compare /.build.oldpackages/kmod-debuginfo-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/kmod-debuginfo-30-1.2.armv7hl.rpm [ 136s] skipping -debuginfo package [ 136s] compare /.build.oldpackages/kmod-debugsource-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/kmod-debugsource-30-1.2.armv7hl.rpm [ 136s] Comparing kmod-debugsource-30-1.1.armv7hl.rpm to kmod-debugsource-30-1.2.armv7hl.rpm [ 137s] This is not a prerelease project. Compare the project name. [ 137s] comparing rpmtags [ 137s] comparing RELEASE [ 137s] comparing PROVIDES [ 137s] comparing scripts [ 137s] comparing filelist [ 137s] comparing file checksum [ 137s] creating rename script [ 137s] RPM meta information is identical [ 137s] compare /.build.oldpackages/kmod-docs-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/kmod-docs-30-1.2.armv7hl.rpm [ 137s] Comparing kmod-docs-30-1.1.armv7hl.rpm to kmod-docs-30-1.2.armv7hl.rpm [ 138s] This is not a prerelease project. Compare the project name. [ 138s] comparing rpmtags [ 138s] comparing RELEASE [ 138s] comparing PROVIDES [ 138s] comparing scripts [ 138s] comparing filelist [ 138s] comparing file checksum [ 138s] creating rename script [ 138s] RPM meta information is identical [ 138s] compare /.build.oldpackages/libkmod-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-30-1.2.armv7hl.rpm [ 138s] Comparing libkmod-30-1.1.armv7hl.rpm to libkmod-30-1.2.armv7hl.rpm [ 139s] This is not a prerelease project. Compare the project name. [ 139s] comparing rpmtags [ 139s] comparing RELEASE [ 139s] comparing PROVIDES [ 139s] comparing scripts [ 139s] comparing filelist [ 139s] comparing file checksum [ 139s] creating rename script [ 139s] RPM file checksum differs. [ 139s] Extracting packages [ 141s] /usr/lib/libkmod.so.2.4.0: only difference was in build-id or gnu_debuglink, GOOD. [ 141s] Package content is identical [ 141s] compare /.build.oldpackages/libkmod-debuginfo-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-debuginfo-30-1.2.armv7hl.rpm [ 142s] skipping -debuginfo package [ 142s] compare /.build.oldpackages/libkmod-devel-30-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/libkmod-devel-30-1.2.armv7hl.rpm [ 142s] Comparing libkmod-devel-30-1.1.armv7hl.rpm to libkmod-devel-30-1.2.armv7hl.rpm [ 142s] This is not a prerelease project. Compare the project name. [ 142s] comparing rpmtags [ 142s] comparing RELEASE [ 142s] comparing PROVIDES [ 142s] comparing scripts [ 142s] comparing filelist [ 142s] comparing file checksum [ 142s] creating rename script [ 142s] RPM meta information is identical [ 142s] [ 142s] f01b07562d64 finished "build kmod.spec" at Mon May 20 10:04:41 UTC 2024. [ 142s] Retried build at Thu Nov 28 04:30:57 2024 returned same result, skipped Retried build at Thu Mar 6 03:45:33 2025 returned same result, skipped Retried build at Fri Apr 25 03:31:18 2025 returned same result, skipped Retried build at Tue May 13 04:24:25 2025 returned same result, skipped