[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 2fdf045350c6 started "build libpciaccess.spec" at Thu Nov 30 21:50:32 UTC 2023. [ 0s] [ 0s] Building libpciaccess for project 'Tizen-8.0-Base' repository 'standard' arch 'armv7l' srcmd5 'd2b18c309f2bec2847bacb6f6e2d8410' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/libpciaccess.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/libpciaccess.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/9/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/libpciaccess.spec build ... [ 0s] registering binfmt handlers for cross build [ 0s] sh: 1: /sbin/modprobe: not found [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 3s] [2/41] preinstalling libncurses... [ 3s] [3/41] preinstalling setup... [ 3s] [4/41] preinstalling filesystem... [ 3s] [5/41] preinstalling glibc... [ 3s] [6/41] preinstalling libgcc... [ 3s] [7/41] preinstalling bash... [ 3s] [8/41] preinstalling diffutils... [ 3s] [9/41] preinstalling grep... [ 3s] [10/41] preinstalling libattr... [ 3s] [11/41] preinstalling libblkid... [ 3s] [12/41] preinstalling libbz2... [ 3s] [13/41] preinstalling libcap... [ 3s] [14/41] preinstalling libfreebl3... [ 3s] [15/41] preinstalling liblua... [ 3s] [16/41] preinstalling liblzma... [ 3s] [17/41] preinstalling libpopt... [ 3s] [18/41] preinstalling libreadline... [ 3s] [19/41] preinstalling libsmack... [ 3s] [20/41] preinstalling libsqlite... [ 3s] [21/41] preinstalling libuuid... [ 3s] [22/41] preinstalling libzstd1... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7l... [ 11s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 13s] [28/41] preinstalling coreutils... [ 13s] [29/41] preinstalling libacl... [ 13s] [30/41] preinstalling libelf... [ 13s] [31/41] preinstalling libmount... [ 13s] [32/41] preinstalling smack... [ 13s] [33/41] preinstalling bzip2... [ 13s] [34/41] preinstalling libmagic... [ 13s] [35/41] preinstalling libxml2... [ 13s] [36/41] preinstalling tar... [ 13s] [37/41] preinstalling util-linux... [ 13s] [38/41] preinstalling util-linux-su... [ 13s] [39/41] preinstalling nss... [ 13s] [40/41] preinstalling libsoftokn3... [ 13s] [41/41] preinstalling rpm... [ 14s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] cat: /proc/sys/fs/binfmt_misc/armeb: No such file or directory [ 14s] .init_b_cache/scripts/qemu-linux-user-x86_64-cross.post: line 8: /proc/sys/fs/binfmt_misc/armeb: Permission denied [ 14s] running qemu-accel-x86_64-armv7l postinstall script [ 15s] running setup postinstall script [ 15s] chroot: failed to run command '': No such file or directory [ 15s] initializing rpm db... [ 15s] reordering...cycle: libsoftokn3 -> nss [ 15s] breaking dependency nss -> libsoftokn3 [ 15s] done [ 15s] querying package ids... [ 15s] [1/98] cumulate libmagic-data-5.44-1.11 [ 15s] [2/98] cumulate setup-0.9-1.4 [ 15s] [3/98] cumulate filesystem-3.1-1.1 [ 15s] [4/98] cumulate glibc-2.30-1.14 [ 15s] [5/98] cumulate libatomic-9.2.0-1.12 [ 15s] [6/98] cumulate libgcc-9.2.0-1.12 [ 15s] [7/98] cumulate bash-3.2.57-1.1 [ 15s] [8/98] cumulate cpio-2.8-1.1 [ 15s] [9/98] cumulate diffutils-3.8-1.1 [ 15s] [10/98] cumulate findutils-4.3.8-1.11 [ 15s] [11/98] cumulate gdbm-1.8.3-1.13 [ 15s] [12/98] cumulate hostname-3.23-1.1 [ 15s] [13/98] cumulate libattr-2.5.1-1.11 [ 15s] [14/98] cumulate libblkid-2.37.4-1.4 [ 15s] [15/98] cumulate libbz2-1.0.8-1.11 [ 15s] [16/98] cumulate libcap-2.24-1.11 [ 15s] [17/98] cumulate libext2fs-1.46.0-1.13 [ 15s] [18/98] cumulate libfreebl3-3.87-1.13 [ 15s] [19/98] cumulate libgfortran-9.2.0-1.12 [ 15s] [20/98] cumulate libgomp-9.2.0-1.12 [ 15s] [21/98] cumulate libitm-9.2.0-1.12 [ 15s] [22/98] cumulate libltdl-2.4.7-1.13 [ 15s] [23/98] cumulate liblua-5.1.5-1.11 [ 15s] [24/98] cumulate liblzma-5.4.0-1.13 [ 15s] [25/98] cumulate libopenssl11-1.1.1u-1.13 [ 15s] [26/98] cumulate libpcre-8.45-1.4 [ 15s] [27/98] cumulate libpopt-1.16-1.11 [ 15s] [28/98] cumulate libsmack-1.3.1-1.11 [ 15s] [29/98] cumulate libsmartcols-2.37.4-1.4 [ 15s] [30/98] cumulate libsqlite-3.40.1-1.11 [ 15s] [31/98] cumulate libstdc++-9.2.0-1.12 [ 15s] [32/98] cumulate libuuid-2.37.4-1.4 [ 15s] [33/98] cumulate libzstd1-1.5.2-1.12 [ 15s] [34/98] cumulate m4-1.4.19-1.1 [ 15s] [35/98] cumulate net-tools-2.0_20121208git-1.1 [ 15s] [36/98] cumulate nspr-4.35-1.11 [ 15s] [37/98] cumulate patch-2.7.6-1.11 [ 15s] [38/98] cumulate pkg-config-0.29.2-1.11 [ 15s] [39/98] cumulate sed-4.1c-1.1 [ 15s] [40/98] cumulate update-alternatives-1.21.18-1.1 [ 15s] [41/98] cumulate which-2.17-1.1 [ 15s] [42/98] cumulate zlib-1.2.13-2.1 [ 15s] [43/98] cumulate build-compare-2015.04.28-1.8 [ 15s] [44/98] cumulate libstdc++-devel-9.2.0-1.12 [ 15s] [45/98] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.7 [ 15s] [46/98] cumulate util-macros-1.19.0-1.1 [ 15s] [47/98] cumulate cpp-9.2.0-1.12 [ 15s] [48/98] cumulate gcc-c++-9.2.0-1.12 [ 15s] [49/98] cumulate binutils-2.33.1-1.13 [ 15s] [50/98] cumulate coreutils-6.9-14.8 [ 15s] [51/98] cumulate gawk-3.1.5-1.1 [ 15s] [52/98] cumulate grep-2.5.2-1.1 [ 15s] [53/98] cumulate libacl-2.2.53-1.11 [ 15s] [54/98] cumulate libcc1-9.2.0-1.12 [ 15s] [55/98] cumulate libelf-0.189-1.13 [ 15s] [56/98] cumulate libmount-2.37.4-1.4 [ 15s] [57/98] cumulate libubsan-9.2.0-1.12 [ 15s] [58/98] cumulate make-4.3-1.11 [ 15s] [59/98] cumulate nss-certs-3.87-1.13 [ 15s] [60/98] cumulate smack-1.3.1-1.11 [ 15s] [61/98] cumulate bzip2-1.0.8-1.11 [ 15s] [62/98] cumulate libfdisk-2.37.4-1.4 [ 15s] [63/98] cumulate libmagic-5.44-1.11 [ 15s] [64/98] cumulate libxml2-2.10.2-1.12 [ 15s] [65/98] cumulate perl-5.34.0-1.11 [ 15s] [66/98] cumulate xz-5.4.0-1.13 [ 15s] [67/98] cumulate build-mkbaselibs-20120927-1.1 [ 15s] [68/98] cumulate linux-glibc-devel-3.10-1.13 [ 15s] [69/98] cumulate terminfo-base-full-6.4-1.4 [ 15s] [70/98] cumulate autoconf-2.71-1.13 [ 15s] [71/98] cumulate file-5.44-1.11 [ 15s] [72/98] cumulate glibc-locale-2.30-1.14 [ 15s] [73/98] cumulate tar-1.17-1.1 [ 15s] [74/98] cumulate gzip-1.3.12-1.11 [ 15s] [75/98] cumulate pam-1.1.6-1.1 [ 15s] [76/98] cumulate tzdata-2023c-1.1 [ 15s] [77/98] cumulate libdw-0.189-1.13 [ 15s] [78/98] cumulate libarchive-3.6.2-2.2 [ 15s] [79/98] cumulate gcc-9.2.0-1.12 [ 15s] [80/98] cumulate glibc-devel-2.30-1.14 [ 15s] [81/98] cumulate qemu-accel-x86_64-armv7l-0.4-1.6 [ 15s] [82/98] cumulate automake-1.16.5-1.13 [ 15s] [83/98] cumulate libasm-0.189-1.13 [ 15s] [84/98] cumulate libncurses6-6.4-1.4 [ 15s] [85/98] cumulate build-20120927-1.1 [ 15s] [86/98] cumulate libncurses-6.4-1.4 [ 15s] [87/98] cumulate less-608-1.1 [ 15s] [88/98] cumulate libreadline-5.2-1.12 [ 15s] [89/98] cumulate procps-ng-3.3.17-1.1 [ 15s] [90/98] cumulate zlib-devel-1.2.13-2.1 [ 15s] [91/98] cumulate libtool-2.4.7-1.13 [ 15s] [92/98] cumulate elfutils-0.189-1.13 [ 15s] [93/98] cumulate util-linux-2.37.4-1.4 [ 15s] [94/98] cumulate util-linux-su-2.37.4-1.4 [ 15s] [95/98] cumulate nss-3.87-1.13 [ 15s] [96/98] cumulate libsoftokn3-3.87-1.13 [ 15s] [97/98] cumulate rpm-4.14.1.1-1.12 [ 15s] [98/98] cumulate rpm-build-4.14.1.1-1.12 [ 15s] now installing cumulated packages [ 16s] Preparing... ######################################## [ 16s] Updating / installing... [ 16s] setup-0.9-1.4 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 16s] ########################## [ 16s] filesystem-3.1-1.1 ######################################## [ 16s] libmagic-data-5.44-1.11 ######################################## [ 16s] glibc-2.30-1.14 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 17s] ######################################## [ 17s] libgcc-9.2.0-1.12 ######################################## [ 18s] bash-3.2.57-1.1 ######################################## [ 18s] zlib-1.2.13-2.1 ######################################## [ 19s] coreutils-6.9-14.8 ######################################## [ 19s] libstdc++-9.2.0-1.12 ######################################## [ 19s] libbz2-1.0.8-1.11 ######################################## [ 19s] liblzma-5.4.0-1.13 ######################################## [ 20s] libelf-0.189-1.13 ######################################## [ 20s] libdw-0.189-1.13 ######################################## [ 20s] libmagic-5.44-1.11 ######################################## [ 20s] libblkid-2.37.4-1.4 ######################################## [ 21s] nspr-4.35-1.11 ######################################## [ 21s] binutils-2.33.1-1.13 ######################################## [ 21s] pam-1.1.6-1.1 ######################################## [ 21s] libcap-2.24-1.11 ######################################## [ 22s] libfreebl3-3.87-1.13 ######################################## [ 22s] liblua-5.1.5-1.11 ######################################## [ 22s] libpopt-1.16-1.11 ######################################## [ 22s] libuuid-2.37.4-1.4 ######################################## [ 22s] libzstd1-1.5.2-1.12 ######################################## [ 23s] pkg-config-0.29.2-1.11 ######################################## [ 23s] linux-glibc-devel-3.10-1.13 ######################################## [ 24s] terminfo-base-full-6.4-1.4 ######################################## [ 24s] libncurses6-6.4-1.4 ######################################## [ 24s] glibc-devel-2.30-1.14 ######################################## [ 24s] libreadline-5.2-1.12 ######################################## [ 24s] libfdisk-2.37.4-1.4 ######################################## [ 24s] nss-certs-3.87-1.13 ######################################## [ 24s] libmount-2.37.4-1.4 ######################################## [ 25s] libasm-0.189-1.13 ######################################## [ 25s] libxml2-2.10.2-1.12 ######################################## [ 25s] xz-5.4.0-1.13 ######################################## [ 25s] bzip2-1.0.8-1.11 ######################################## [ 25s] libcc1-9.2.0-1.12 ######################################## [ 25s] libubsan-9.2.0-1.12 ######################################## [ 25s] gzip-1.3.12-1.11 ######################################## [ 25s] make-4.3-1.11 ######################################## [ 26s] findutils-4.3.8-1.11 ######################################## [ 26s] gdbm-1.8.3-1.13 ######################################## [ 27s] perl-5.34.0-1.11 ######################################## [ 27s] build-mkbaselibs-20120927-1.1 ######################################## [ 28s] libattr-2.5.1-1.11 ######################################## [ 28s] libacl-2.2.53-1.11 ######################################## [ 28s] tar-1.17-1.1 ######################################## [ 28s] libgfortran-9.2.0-1.12 ######################################## [ 28s] libgomp-9.2.0-1.12 ######################################## [ 28s] libitm-9.2.0-1.12 ######################################## [ 29s] libltdl-2.4.7-1.13 ######################################## [ 29s] libopenssl11-1.1.1u-1.13 ######################################## [ 29s] libarchive-3.6.2-2.2 ######################################## [ 29s] libpcre-8.45-1.4 ######################################## [ 30s] libsmack-1.3.1-1.11 ######################################## [ 30s] libsmartcols-2.37.4-1.4 ######################################## [ 30s] libsqlite-3.40.1-1.11 ######################################## [ 31s] libsoftokn3-3.87-1.13 ######################################## [ 31s] nss-3.87-1.13 ######################################## [ 32s] rpm-4.14.1.1-1.12 ######################################## [ 32s] m4-1.4.19-1.1 ######################################## [ 32s] autoconf-2.71-1.13 ######################################## [ 33s] automake-1.16.5-1.13 ######################################## [ 33s] patch-2.7.6-1.11 ######################################## [ 33s] sed-4.1c-1.1 ######################################## [ 34s] util-linux-2.37.4-1.4 ######################################## [ 34s] libatomic-9.2.0-1.12 ######################################## [ 34s] libtool-2.4.7-1.13 ######################################## [ 34s] build-20120927-1.1 ######################################## [ 34s] zlib-devel-1.2.13-2.1 ######################################## [ 34s] libncurses-6.4-1.4 ######################################## [ 34s] util-macros-1.19.0-1.1 ######################################## [ 35s] libstdc++-devel-9.2.0-1.12 ######################################## [ 35s] build-compare-2015.04.28-1.8 ######################################## [ 43s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 44s] gcc-9.2.0-1.12 ######################################## [ 60s] qemu-accel-x86_64-armv7l-0.4-1.6 ######################################## [ 60s] rpm-build-4.14.1.1-1.12 ######################################## [ 60s] util-linux-su-2.37.4-1.4 ######################################## [ 60s] smack-1.3.1-1.11 ######################################## [ 60s] grep-2.5.2-1.1 ######################################## [ 61s] elfutils-0.189-1.13 ######################################## [ 61s] less-608-1.1 ######################################## [ 61s] procps-ng-3.3.17-1.1 ######################################## [ 61s] file-5.44-1.11 ######################################## [ 61s] glibc-locale-2.30-1.14 ######################################## [ 62s] tzdata-2023c-1.1 ######################################## [ 62s] cpp-9.2.0-1.12 ######################################## [ 63s] gcc-c++-9.2.0-1.12 ######################################## [ 63s] gawk-3.1.5-1.1 ######################################## [ 63s] cpio-2.8-1.1 ######################################## [ 63s] diffutils-3.8-1.1 ######################################## [ 63s] hostname-3.23-1.1 ######################################## [ 63s] libext2fs-1.46.0-1.13 ######################################## [ 63s] net-tools-2.0_20121208git-1.1 ######################################## [ 63s] update-alternatives-1.21.18-1.1 ######################################## [ 63s] which-2.17-1.1 ######################################## [ 65s] now finalizing build dir... [ 66s] ----------------------------------------------------------------- [ 66s] I have the following modifications for libpciaccess.spec: [ 66s] 6c6 [ 66s] < Release: 0 [ 66s] --- [ 66s] > Release: 2.1 [ 66s] 84a85 [ 66s] > %changelog [ 66s] build target is armv7l-tizen-linux [ 66s] ----------------------------------------------------------------- [ 66s] ----- building libpciaccess.spec (user abuild) [ 66s] ----------------------------------------------------------------- [ 66s] ----------------------------------------------------------------- [ 66s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-8.0-Base/standard/d2b18c309f2bec2847bacb6f6e2d8410-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 66s] Building target platforms: armv7l-tizen-linux [ 66s] Building for target armv7l-tizen-linux [ 66s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.OfJgzt [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + rm -rf libpciaccess-0.13.2 [ 66s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 66s] + /bin/tar -xof - [ 66s] + STATUS=0 [ 66s] + '[' 0 -ne 0 ']' [ 66s] + cd libpciaccess-0.13.2 [ 66s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 66s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 66s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 66s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 66s] patching file src/Makefile.am [ 66s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 66s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 66s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 66s] patching file src/common_bridge.c [ 66s] patching file src/linux_sysfs.c [ 66s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 66s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 66s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 66s] patching file src/linux_sysfs.c [ 66s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 66s] + exit 0 [ 66s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.iwVyTw [ 66s] + umask 022 [ 66s] + cd /home/abuild/rpmbuild/BUILD [ 66s] + cd libpciaccess-0.13.2 [ 66s] ++ uname -m [ 66s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 66s] + LANG=C [ 66s] + export LANG [ 66s] + unset DISPLAY [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + LDFLAGS= [ 66s] + export LDFLAGS [ 66s] + NOCONFIGURE=1 [ 66s] + AR=gcc-ar [ 66s] + export AR [ 66s] + NM=/bin/nm [ 66s] + export NM [ 66s] + RANLIB=gcc-ranlib [ 66s] + export RANLIB [ 66s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CFLAGS [ 66s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 66s] + export CXXFLAGS [ 66s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 66s] + export FFLAGS [ 66s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 67s] autoreconf: export WARNINGS= [ 67s] autoreconf: Entering directory '.' [ 67s] autoreconf: configure.ac: not using Gettext [ 68s] autoreconf: running: aclocal -I m4 [ 71s] autoreconf: configure.ac: tracing [ 72s] autoreconf: running: libtoolize --copy [ 72s] libtoolize: putting auxiliary files in '.'. [ 72s] libtoolize: copying file './ltmain.sh' [ 72s] libtoolize: putting macros in 'm4'. [ 72s] libtoolize: copying file 'm4/libtool.m4' [ 72s] libtoolize: copying file 'm4/ltoptions.m4' [ 72s] libtoolize: copying file 'm4/ltsugar.m4' [ 72s] libtoolize: copying file 'm4/ltversion.m4' [ 72s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 72s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 72s] libtoolize: and rerunning libtoolize and aclocal. [ 72s] autoreconf: configure.ac: not using Intltool [ 72s] autoreconf: configure.ac: not using Gtkdoc [ 72s] autoreconf: running: aclocal -I m4 [ 74s] autoreconf: running: /usr/bin/autoconf [ 75s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 75s] configure.ac:36: You should run autoupdate. [ 75s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 75s] configure.ac:36: the top level [ 75s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 75s] configure.ac:42: You should run autoupdate. [ 75s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 75s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 75s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 75s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 75s] configure.ac:42: the top level [ 76s] autoreconf: running: /usr/bin/autoheader [ 78s] autoreconf: running: automake --add-missing --copy --no-force [ 79s] configure.ac:33: installing './compile' [ 79s] configure.ac:36: installing './config.guess' [ 79s] configure.ac:36: installing './config.sub' [ 79s] configure.ac:32: installing './install-sh' [ 79s] configure.ac:32: installing './missing' [ 79s] scanpci/Makefile.am: installing './depcomp' [ 80s] autoreconf: Leaving directory '.' [ 80s] checking for a BSD-compatible install... /bin/install -c [ 80s] checking whether build environment is sane... yes [ 80s] checking for a race-free mkdir -p... /bin/mkdir -p [ 80s] checking for gawk... gawk [ 80s] checking whether make sets $(MAKE)... yes [ 80s] checking whether make supports nested variables... yes [ 80s] checking whether make supports the include directive... yes (GNU style) [ 80s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 80s] checking whether the C compiler works... yes [ 80s] checking for C compiler default output file name... a.out [ 80s] checking for suffix of executables... [ 80s] checking whether we are cross compiling... no [ 80s] checking for suffix of object files... o [ 80s] checking whether the compiler supports GNU C... yes [ 80s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 80s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 80s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 80s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 80s] checking for stdio.h... yes [ 80s] checking for stdlib.h... yes [ 80s] checking for string.h... yes [ 80s] checking for inttypes.h... yes [ 80s] checking for stdint.h... yes [ 80s] checking for strings.h... yes [ 81s] checking for sys/stat.h... yes [ 81s] checking for sys/types.h... yes [ 81s] checking for unistd.h... yes [ 81s] checking for wchar.h... yes [ 81s] checking for minix/config.h... no [ 81s] checking whether it is safe to define __EXTENSIONS__... yes [ 81s] checking whether _XOPEN_SOURCE should be defined... no [ 81s] checking build system type... armv7l-tizen-linux-gnueabi [ 81s] checking host system type... armv7l-tizen-linux-gnueabi [ 81s] checking how to print strings... printf [ 81s] checking for a sed that does not truncate output... /bin/sed [ 81s] checking for grep that handles long lines and -e... /bin/grep [ 81s] checking for egrep... /bin/grep -E [ 81s] checking for fgrep... /bin/grep -F [ 81s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 81s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 81s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 81s] checking the name lister (/bin/nm) interface... BSD nm [ 81s] checking whether ln -s works... yes [ 81s] checking the maximum length of command line arguments... 1572864 [ 81s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 81s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 81s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 81s] checking for armv7l-tizen-linux-gnueabi-file... no [ 81s] checking for file... file [ 81s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 81s] checking for objdump... objdump [ 81s] checking how to recognize dependent libraries... pass_all [ 81s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 81s] checking for dlltool... no [ 81s] checking how to associate runtime and link libraries... printf %s\n [ 81s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 81s] checking for archiver @FILE support... @ [ 81s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 81s] checking for strip... strip [ 81s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 81s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 81s] checking for sysroot... no [ 81s] checking for a working dd... /bin/dd [ 81s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 81s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 81s] checking for mt... no [ 81s] checking if : is a manifest tool... no [ 81s] checking for dlfcn.h... yes [ 81s] checking for objdir... .libs [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 81s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 81s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 81s] checking whether -lc should be explicitly linked in... no [ 81s] checking dynamic linker characteristics... GNU/Linux ld.so [ 81s] checking how to hardcode library paths into programs... immediate [ 81s] checking whether stripping libraries is possible... yes [ 81s] checking if libtool supports shared libraries... yes [ 81s] checking whether to build shared libraries... yes [ 81s] checking whether to build static libraries... yes [ 81s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 81s] checking whether __clang__ is declared... no [ 81s] checking whether __INTEL_COMPILER is declared... no [ 81s] checking whether __SUNPRO_C is declared... no [ 81s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 81s] checking pkg-config is at least version 0.9.0... yes [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 81s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 82s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 83s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 83s] checking whether make supports nested variables... (cached) yes [ 83s] checking for special C compiler options needed for large files... no [ 83s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 83s] checking for err.h... yes [ 83s] checking for asm/mtrr.h... no [ 83s] checking for struct pci_io.pi_sel.pc_domain... no [ 83s] checking that generated files are newer than configure... done [ 83s] configure: creating ./config.status [ 83s] config.status: creating Makefile [ 83s] config.status: creating include/Makefile [ 83s] config.status: creating man/Makefile [ 83s] config.status: creating src/Makefile [ 83s] config.status: creating scanpci/Makefile [ 84s] config.status: creating pciaccess.pc [ 84s] config.status: creating config.h [ 84s] config.status: executing depfiles commands [ 84s] config.status: executing libtool commands [ 84s] + export 'CFLAGS=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -w' [ 84s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -w' [ 84s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 84s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 84s] + AR=gcc-ar [ 84s] + export AR [ 84s] + NM=/bin/nm [ 84s] + export NM [ 84s] + RANLIB=gcc-ranlib [ 84s] + export RANLIB [ 84s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 84s] + export CFLAGS [ 84s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 84s] + export CXXFLAGS [ 84s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 84s] + export FFLAGS [ 84s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 84s] checking for a BSD-compatible install... /bin/install -c [ 84s] checking whether build environment is sane... yes [ 84s] checking for a race-free mkdir -p... /bin/mkdir -p [ 84s] checking for gawk... gawk [ 84s] checking whether make sets $(MAKE)... yes [ 84s] checking whether make supports nested variables... yes [ 84s] checking whether make supports the include directive... yes (GNU style) [ 84s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 84s] checking whether the C compiler works... yes [ 84s] checking for C compiler default output file name... a.out [ 84s] checking for suffix of executables... [ 84s] checking whether we are cross compiling... no [ 84s] checking for suffix of object files... o [ 84s] checking whether the compiler supports GNU C... yes [ 84s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 84s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 85s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 85s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 85s] checking for stdio.h... yes [ 85s] checking for stdlib.h... yes [ 85s] checking for string.h... yes [ 85s] checking for inttypes.h... yes [ 85s] checking for stdint.h... yes [ 85s] checking for strings.h... yes [ 85s] checking for sys/stat.h... yes [ 85s] checking for sys/types.h... yes [ 85s] checking for unistd.h... yes [ 85s] checking for wchar.h... yes [ 85s] checking for minix/config.h... no [ 85s] checking whether it is safe to define __EXTENSIONS__... yes [ 85s] checking whether _XOPEN_SOURCE should be defined... no [ 85s] checking build system type... armv7l-tizen-linux-gnueabi [ 85s] checking host system type... armv7l-tizen-linux-gnueabi [ 85s] checking how to print strings... printf [ 85s] checking for a sed that does not truncate output... /bin/sed [ 85s] checking for grep that handles long lines and -e... /bin/grep [ 85s] checking for egrep... /bin/grep -E [ 85s] checking for fgrep... /bin/grep -F [ 85s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 85s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 85s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 85s] checking the name lister (/bin/nm) interface... BSD nm [ 85s] checking whether ln -s works... yes [ 85s] checking the maximum length of command line arguments... 1572864 [ 85s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 85s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 85s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 85s] checking for armv7l-tizen-linux-gnueabi-file... no [ 85s] checking for file... file [ 85s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 85s] checking for objdump... objdump [ 85s] checking how to recognize dependent libraries... pass_all [ 85s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 85s] checking for dlltool... no [ 85s] checking how to associate runtime and link libraries... printf %s\n [ 85s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 85s] checking for archiver @FILE support... @ [ 85s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 85s] checking for strip... strip [ 85s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 85s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 85s] checking for sysroot... no [ 85s] checking for a working dd... /bin/dd [ 85s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 85s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 85s] checking for mt... no [ 85s] checking if : is a manifest tool... no [ 85s] checking for dlfcn.h... yes [ 85s] checking for objdir... .libs [ 85s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... yes [ 85s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 85s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 85s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 85s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 85s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 85s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 85s] checking whether -lc should be explicitly linked in... no [ 85s] checking dynamic linker characteristics... GNU/Linux ld.so [ 85s] checking how to hardcode library paths into programs... immediate [ 85s] checking whether stripping libraries is possible... yes [ 85s] checking if libtool supports shared libraries... yes [ 85s] checking whether to build shared libraries... yes [ 85s] checking whether to build static libraries... no [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 86s] checking whether __clang__ is declared... no [ 86s] checking whether __INTEL_COMPILER is declared... no [ 86s] checking whether __SUNPRO_C is declared... no [ 86s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 86s] checking pkg-config is at least version 0.9.0... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 86s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 87s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 87s] checking whether make supports nested variables... (cached) yes [ 87s] checking for gzopen in -lz... yes [ 88s] checking for zlib.h... yes [ 88s] checking for special C compiler options needed for large files... no [ 88s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 88s] checking for err.h... yes [ 88s] checking for asm/mtrr.h... no [ 88s] checking for struct pci_io.pi_sel.pc_domain... no [ 88s] checking that generated files are newer than configure... done [ 88s] configure: creating ./config.status [ 88s] config.status: creating Makefile [ 88s] config.status: creating include/Makefile [ 88s] config.status: creating man/Makefile [ 88s] config.status: creating src/Makefile [ 88s] config.status: creating scanpci/Makefile [ 88s] config.status: creating pciaccess.pc [ 88s] config.status: creating config.h [ 88s] config.status: executing depfiles commands [ 88s] config.status: executing libtool commands [ 89s] + make -j12 [ 89s] make all-recursive [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] Making all in include [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] make[2]: Nothing to be done for 'all'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] Making all in man [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] GEN scanpci.1 [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] Making all in src [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] CC common_bridge.lo [ 89s] CC common_iterator.lo [ 89s] CC common_init.lo [ 89s] CC common_interface.lo [ 89s] CC common_io.lo [ 89s] CC common_capability.lo [ 89s] CC common_device_name.lo [ 89s] CC common_map.lo [ 89s] CC common_vgaarb.lo [ 89s] CC linux_sysfs.lo [ 89s] CC linux_devmem.lo [ 89s] CCLD libpciaccess.la [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] Making all in scanpci [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] CC scanpci.o [ 89s] CCLD scanpci [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] + exit 0 [ 89s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.d26Bfu [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd libpciaccess-0.13.2 [ 89s] + LANG=C [ 89s] + export LANG [ 89s] + unset DISPLAY [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 89s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 89s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm install [ 89s] Making install in include [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] make[2]: Nothing to be done for 'install-exec-am'. [ 89s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/include' [ 89s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/include' [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 89s] Making install in man [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] make[2]: Nothing to be done for 'install-exec-am'. [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 89s] Making install in src [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib' [ 89s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib' [ 89s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 89s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 89s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib/libpciaccess.la [ 89s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 89s] Making install in scanpci [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] make[2]: Nothing to be done for 'install-exec-am'. [ 89s] make[2]: Nothing to be done for 'install-data-am'. [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 89s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] make[2]: Nothing to be done for 'install-exec-am'. [ 89s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib/pkgconfig' [ 89s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib/pkgconfig' [ 89s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 89s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/info/dir [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm -regex '.*\.la$' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm -regex '.*\.a$' [ 89s] + xargs rm -f -- [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/info [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/doc/packages [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/doc/libpciaccess [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/doc/libpciaccess-0.13.2 [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/gtk-doc [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/doc [ 89s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/man [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm -regex '.*/man/man./.*.[0-9]' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm -regex '.*/man/../man./.*.[0-9]' [ 89s] + xargs rm -f -- [ 89s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 89s] + xargs rm -f -- [ 90s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-2.1 --unique-debug-src-base libpciaccess-0.13.2-2.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 90s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 90s] 235 blocks [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 90s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 90s] + /usr/lib/rpm/check-buildroot [ 90s] + /usr/lib/rpm//brp-compress [ 90s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 90s] + /usr/lib/rpm/brp-python-hardlink [ 90s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 90s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 90s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 90s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 90s] Processing files: libpciaccess-0.13.2-2.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.whH6Lu [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd libpciaccess-0.13.2 [ 90s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export LICENSEDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess [ 90s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess [ 90s] + exit 0 [ 90s] Provides: libpciaccess = 0.13.2-2.1 libpciaccess(armv7l-32) = 0.13.2-2.1 libpciaccess.so.0 [ 90s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires(post): /sbin/ldconfig [ 90s] Requires(postun): /sbin/ldconfig [ 90s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 90s] Processing files: libpciaccess-debugsource-0.13.2-2.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Provides: libpciaccess-debugsource = 0.13.2-2.1 libpciaccess-debugsource(armv7l-32) = 0.13.2-2.1 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Processing files: libpciaccess-devel-0.13.2-2.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.SY6oWt [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd libpciaccess-0.13.2 [ 90s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess-devel [ 90s] + export LC_ALL=C [ 90s] + LC_ALL=C [ 90s] + export LICENSEDIR [ 90s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess-devel [ 90s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm/usr/share/licenses/libpciaccess-devel [ 90s] + exit 0 [ 90s] Provides: libpciaccess-devel = 0.13.2-2.1 libpciaccess-devel(armv7l-32) = 0.13.2-2.1 pkgconfig(pciaccess) = 0.13.2 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 90s] Processing files: libpciaccess-debuginfo-0.13.2-2.1.armv7l [ 90s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 90s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 90s] [ 90s] Provides: libpciaccess-debuginfo = 0.13.2-2.1 libpciaccess-debuginfo(armv7l-32) = 0.13.2-2.1 [ 90s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 90s] Recommends: libpciaccess-debugsource(armv7l-32) = 0.13.2-2.1 [ 90s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 90s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-2.1.src.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-2.1.armv7l.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-2.1.armv7l.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-2.1.armv7l.rpm [ 90s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-2.1.armv7l.rpm [ 90s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3XGEtu [ 90s] + umask 022 [ 90s] + cd /home/abuild/rpmbuild/BUILD [ 90s] + cd libpciaccess-0.13.2 [ 90s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-2.1.arm [ 90s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 91s] no targets for arch armv7l, nothing to do [ 91s] ... comparing built packages with the former built [ 91s] /usr/lib/build/pkg-diff.sh [ 91s] compare /.build.oldpackages/libpciaccess-0.13.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-2.1.src.rpm [ 91s] This is not a prerelease project. Compare the project name. [ 91s] comparing rpmtags [ 91s] comparing RELEASE [ 91s] comparing PROVIDES [ 91s] comparing scripts [ 91s] comparing filelist [ 91s] comparing file checksum [ 91s] RPM meta information is identical [ 91s] compare /.build.oldpackages/libpciaccess-0.13.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-2.1.armv7l.rpm [ 91s] Comparing libpciaccess-0.13.2-1.1.armv7l.rpm to libpciaccess-0.13.2-2.1.armv7l.rpm [ 92s] This is not a prerelease project. Compare the project name. [ 92s] comparing rpmtags [ 92s] --- /tmp/tmp.Yngm137792/tmp.IXGc138435 2023-12-01 06:52:04.043977641 +0900 [ 92s] +++ /tmp/tmp.Yngm137792/tmp.vfaO138540 2023-12-01 06:52:04.047977641 +0900 [ 92s] @@ -9,4 +9,4 @@ [ 92s] cpio xz 5T [ 92s] [ 92s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 92s] -obs://127.0.0.1/Tizen-8.0-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-8.0-Base [ 92s] +obs://127.0.0.1/Tizen-8.0-Base/standard/d2b18c309f2bec2847bacb6f6e2d8410-libpciaccess Tizen-8.0-Base [ 92s] RPM meta information is different [ 92s] compare /.build.oldpackages/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-2.1.armv7l.rpm [ 92s] skipping -debuginfo package [ 92s] compare /.build.oldpackages/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-2.1.armv7l.rpm [ 92s] Comparing libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm to libpciaccess-debugsource-0.13.2-2.1.armv7l.rpm [ 92s] This is not a prerelease project. Compare the project name. [ 92s] comparing rpmtags [ 92s] --- /tmp/tmp.skKW139228/tmp.CgbF139698 2023-12-01 06:52:04.259977634 +0900 [ 92s] +++ /tmp/tmp.skKW139228/tmp.gEnf139721 2023-12-01 06:52:04.283977633 +0900 [ 92s] @@ -10,4 +10,4 @@ [ 92s] cpio xz 5T [ 92s] [ 92s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 92s] -obs://127.0.0.1/Tizen-8.0-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-8.0-Base [ 92s] +obs://127.0.0.1/Tizen-8.0-Base/standard/d2b18c309f2bec2847bacb6f6e2d8410-libpciaccess Tizen-8.0-Base [ 92s] RPM meta information is different [ 92s] compare /.build.oldpackages/libpciaccess-devel-0.13.2-1.1.armv7l.rpm /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-2.1.armv7l.rpm [ 92s] Comparing libpciaccess-devel-0.13.2-1.1.armv7l.rpm to libpciaccess-devel-0.13.2-2.1.armv7l.rpm [ 92s] This is not a prerelease project. Compare the project name. [ 92s] comparing rpmtags [ 92s] --- /tmp/tmp.qYeO140019/tmp.RfgN140210 2023-12-01 06:52:04.475977627 +0900 [ 92s] +++ /tmp/tmp.qYeO140019/tmp.Pgad140218 2023-12-01 06:52:04.479977627 +0900 [ 92s] @@ -12,4 +12,4 @@ [ 92s] cpio xz 5T [ 92s] [ 92s] 1363608000 Anas Nashif submit/trunk/20130204.203930@07d4de2 - Fixed package groups [ 92s] -obs://127.0.0.1/Tizen-8.0-Base/standard/d4f55a0f31cd367faea6546b61610b8c-libpciaccess Tizen-8.0-Base [ 92s] +obs://127.0.0.1/Tizen-8.0-Base/standard/d2b18c309f2bec2847bacb6f6e2d8410-libpciaccess Tizen-8.0-Base [ 92s] RPM meta information is different [ 92s] [ 92s] 2fdf045350c6 finished "build libpciaccess.spec" at Thu Nov 30 21:52:04 UTC 2023. [ 92s] Retried build at Wed Dec 13 01:37:06 2023 returned same result, skipped Retried build at Fri Mar 29 02:17:35 2024 returned same result, skipped Retried build at Tue May 14 11:02:25 2024 returned same result, skipped Retried build at Wed May 29 12:28:26 2024 returned same result, skipped Retried build at Thu Nov 21 07:06:20 2024 returned same result, skipped Retried build at Tue Nov 26 04:02:43 2024 returned same result, skipped Retried build at Thu Mar 6 02:59:56 2025 returned same result, skipped Retried build at Tue May 13 05:01:59 2025 returned same result, skipped Retried build at Tue Jul 29 09:16:05 2025 returned same result, skipped Retried build at Tue Nov 11 05:40:18 2025 returned same result, skipped