[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] aaea13ff65b4 started "build libarchive.spec" at Tue Nov 26 02:13:48 UTC 2024. [ 0s] [ 0s] Building libarchive for project 'Tizen-8.0-Base' repository 'standard' arch 'armv7hl' srcmd5 '980f22cbd49862d47430e63b3cc25a87' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/libarchive.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/libarchive.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/21/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/libarchive.spec build ... [ 0s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 1s] [16/41] preinstalling liblzma... [ 1s] [17/41] preinstalling libpopt... [ 1s] [18/41] preinstalling libreadline... [ 1s] [19/41] preinstalling libsmack... [ 1s] [20/41] preinstalling libsqlite... [ 1s] [21/41] preinstalling libuuid... [ 1s] [22/41] preinstalling libzstd1... [ 1s] [23/41] preinstalling nspr... [ 1s] [24/41] preinstalling sed... [ 1s] [25/41] preinstalling zlib... [ 1s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 14s] [28/41] preinstalling coreutils... [ 14s] [29/41] preinstalling libacl... [ 14s] [30/41] preinstalling libelf... [ 14s] [31/41] preinstalling libmount... [ 14s] [32/41] preinstalling smack... [ 15s] [33/41] preinstalling bzip2... [ 15s] [34/41] preinstalling libmagic... [ 15s] [35/41] preinstalling libxml2... [ 15s] [36/41] preinstalling tar... [ 15s] [37/41] preinstalling util-linux... [ 15s] [38/41] preinstalling util-linux-su... [ 15s] [39/41] preinstalling nss... [ 15s] [40/41] preinstalling libsoftokn3... [ 15s] [41/41] preinstalling rpm... [ 16s] running qemu-linux-user-x86_64-cross postinstall script [ 17s] running qemu-accel-x86_64-armv7hl postinstall script [ 17s] running setup postinstall script [ 17s] chroot: failed to run command '': No such file or directory [ 17s] initializing rpm db... [ 17s] reordering...cycle: libsoftokn3 -> nss [ 17s] breaking dependency nss -> libsoftokn3 [ 17s] done [ 17s] querying package ids... [ 19s] [1/109] cumulate libmagic-data-5.44-1.18 [ 19s] [2/109] cumulate setup-0.9-1.9 [ 19s] [3/109] cumulate filesystem-3.1-1.1 [ 19s] [4/109] cumulate glibc-2.30-1.23 [ 19s] [5/109] cumulate libatomic-9.2.0-1.23 [ 19s] [6/109] cumulate libgcc-9.2.0-1.23 [ 19s] [7/109] cumulate bash-3.2.57-2.1 [ 19s] [8/109] cumulate cpio-2.8-1.1 [ 19s] [9/109] cumulate diffutils-3.8-1.1 [ 19s] [10/109] cumulate findutils-4.3.8-2.5 [ 19s] [11/109] cumulate gdbm-1.8.3-2.8 [ 19s] [12/109] cumulate hostname-3.23-1.1 [ 19s] [13/109] cumulate libattr-2.5.1-2.5 [ 19s] [14/109] cumulate libblkid-2.37.4-3.5 [ 19s] [15/109] cumulate libbz2-1.0.8-1.17 [ 19s] [16/109] cumulate libcap-2.24-1.18 [ 19s] [17/109] cumulate libcom_err-1.46.0-1.20 [ 19s] [18/109] cumulate libfreebl3-3.98-1.7 [ 19s] [19/109] cumulate libgfortran-9.2.0-1.23 [ 19s] [20/109] cumulate libgomp-9.2.0-1.23 [ 19s] [21/109] cumulate libitm-9.2.0-1.23 [ 19s] [22/109] cumulate libltdl-2.4.7-2.8 [ 19s] [23/109] cumulate liblua-5.1.5-1.17 [ 19s] [24/109] cumulate liblzma-5.4.0-1.23 [ 19s] [25/109] cumulate libopenssl11-1.1.1w-2.1 [ 19s] [26/109] cumulate libpcre-8.45-2.2 [ 19s] [27/109] cumulate libpopt-1.16-1.18 [ 19s] [28/109] cumulate libsmack-1.3.1-1.18 [ 19s] [29/109] cumulate libsmartcols-2.37.4-3.5 [ 19s] [30/109] cumulate libsqlite-3.40.1-1.18 [ 19s] [31/109] cumulate libstdc++-9.2.0-1.23 [ 19s] [32/109] cumulate libuuid-2.37.4-3.5 [ 19s] [33/109] cumulate libzstd1-1.5.2-2.6 [ 19s] [34/109] cumulate m4-1.4.19-1.1 [ 19s] [35/109] cumulate net-tools-2.0_20121208git-1.6 [ 19s] [36/109] cumulate nspr-4.35-1.17 [ 19s] [37/109] cumulate patch-2.7.6-1.18 [ 19s] [38/109] cumulate pkg-config-0.29.2-2.6 [ 19s] [39/109] cumulate sed-4.1c-2.1 [ 19s] [40/109] cumulate update-alternatives-1.21.18-2.1 [ 19s] [41/109] cumulate which-2.17-1.1 [ 19s] [42/109] cumulate zlib-1.3-1.4 [ 19s] [43/109] cumulate build-compare-2015.04.28-1.12 [ 19s] [44/109] cumulate libstdc++-devel-9.2.0-1.23 [ 19s] [45/109] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.6 [ 19s] [46/109] cumulate cpp-9.2.0-1.23 [ 19s] [47/109] cumulate gcc-c++-9.2.0-1.23 [ 19s] [48/109] cumulate xz-devel-5.4.0-1.23 [ 19s] [49/109] cumulate binutils-2.33.1-1.22 [ 19s] [50/109] cumulate coreutils-6.9-15.2 [ 19s] [51/109] cumulate gawk-3.1.5-2.1 [ 19s] [52/109] cumulate grep-2.5.2-2.1 [ 19s] [53/109] cumulate libacl-2.2.53-1.17 [ 19s] [54/109] cumulate libcc1-9.2.0-1.23 [ 19s] [55/109] cumulate libelf-0.189-1.22 [ 19s] [56/109] cumulate libext2fs-1.46.0-1.20 [ 19s] [57/109] cumulate libmount-2.37.4-3.5 [ 19s] [58/109] cumulate libubsan-9.2.0-1.23 [ 19s] [59/109] cumulate make-4.3-1.18 [ 19s] [60/109] cumulate nss-certs-3.98-1.7 [ 19s] [61/109] cumulate smack-1.3.1-1.18 [ 19s] [62/109] cumulate bison-3.0.5-1.19 [ 19s] [63/109] cumulate bzip2-1.0.8-1.17 [ 19s] [64/109] cumulate libfdisk-2.37.4-3.5 [ 19s] [65/109] cumulate libmagic-5.44-1.18 [ 19s] [66/109] cumulate libxml2-2.10.2-1.18 [ 19s] [67/109] cumulate perl-5.34.0-1.18 [ 19s] [68/109] cumulate xz-5.4.0-1.23 [ 19s] [69/109] cumulate build-mkbaselibs-20120927-1.1 [ 19s] [70/109] cumulate linux-glibc-devel-3.10-2.5 [ 19s] [71/109] cumulate terminfo-base-full-6.4-2.7 [ 19s] [72/109] cumulate autoconf-2.71-1.20 [ 19s] [73/109] cumulate file-5.44-1.18 [ 19s] [74/109] cumulate glibc-locale-2.30-1.23 [ 19s] [75/109] cumulate tar-1.17-2.1 [ 19s] [76/109] cumulate gzip-1.3.12-2.5 [ 19s] [77/109] cumulate pam-1.1.6-2.5 [ 19s] [78/109] cumulate tzdata-2023c-1.1 [ 19s] [79/109] cumulate libdw-0.189-1.22 [ 19s] [80/109] cumulate gcc-9.2.0-1.23 [ 19s] [81/109] cumulate glibc-devel-2.30-1.23 [ 19s] [82/109] cumulate qemu-accel-x86_64-armv7hl-0.4-1.16 [ 19s] [83/109] cumulate automake-1.16.5-1.20 [ 19s] [84/109] cumulate libasm-0.189-1.22 [ 19s] [85/109] cumulate libncurses5-6.4-2.7 [ 19s] [86/109] cumulate libncurses6-6.4-2.7 [ 19s] [87/109] cumulate build-20120927-1.1 [ 19s] [88/109] cumulate libncurses-6.4-2.7 [ 19s] [89/109] cumulate bzip2-devel-1.0.8-1.17 [ 19s] [90/109] cumulate less-608-1.1 [ 19s] [91/109] cumulate libattr-devel-2.5.1-2.5 [ 19s] [92/109] cumulate libreadline-5.2-2.5 [ 19s] [93/109] cumulate zlib-devel-1.3-1.4 [ 19s] [94/109] cumulate libcom_err-devel-1.46.0-1.20 [ 19s] [95/109] cumulate libtool-2.4.7-2.8 [ 19s] [96/109] cumulate ncurses-devel-6.4-2.7 [ 19s] [97/109] cumulate elfutils-0.189-1.22 [ 19s] [98/109] cumulate readline-devel-5.2-2.5 [ 19s] [99/109] cumulate libext2fs-devel-1.46.0-1.20 [ 19s] [100/109] cumulate libopenssl1.1-devel-1.1.1w-2.1 [ 19s] [101/109] cumulate libacl-devel-2.2.53-1.17 [ 19s] [102/109] cumulate libxml2-tools-2.10.2-1.18 [ 19s] [103/109] cumulate util-linux-2.37.4-3.5 [ 19s] [104/109] cumulate util-linux-su-2.37.4-3.5 [ 19s] [105/109] cumulate libxml2-devel-2.10.2-1.18 [ 19s] [106/109] cumulate nss-3.98-1.7 [ 19s] [107/109] cumulate libsoftokn3-3.98-1.7 [ 19s] [108/109] cumulate rpm-4.14.1.1-1.21 [ 19s] [109/109] cumulate rpm-build-4.14.1.1-1.21 [ 19s] now installing cumulated packages [ 20s] Preparing... ######################################## [ 20s] Updating / installing... [ 20s] setup-0.9-1.9 ######################################## [ 20s] filesystem-3.1-1.1 ######################################## [ 21s] libmagic-data-5.44-1.18 ######################################## [ 21s] glibc-2.30-1.23 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 21s] ######################################## [ 21s] libgcc-9.2.0-1.23 ######################################## [ 21s] bash-3.2.57-2.1 ######################################## [ 21s] zlib-1.3-1.4 ######################################## [ 22s] pkg-config-0.29.2-2.6 ######################################## [ 22s] libstdc++-9.2.0-1.23 ######################################## [ 22s] coreutils-6.9-15.2 ######################################## [ 22s] libbz2-1.0.8-1.17 ######################################## [ 22s] liblzma-5.4.0-1.23 ######################################## [ 22s] libelf-0.189-1.22 ######################################## [ 22s] libdw-0.189-1.22 ######################################## [ 23s] libmagic-5.44-1.18 ######################################## [ 23s] libblkid-2.37.4-3.5 ######################################## [ 23s] nspr-4.35-1.17 ######################################## [ 24s] terminfo-base-full-6.4-2.7 ######################################## [ 24s] libncurses6-6.4-2.7 ######################################## [ 24s] libreadline-5.2-2.5 ######################################## [ 25s] libxml2-2.10.2-1.18 ######################################## [ 25s] pam-1.1.6-2.5 ######################################## [ 26s] binutils-2.33.1-1.22 ######################################## [ 26s] libattr-2.5.1-2.5 ######################################## [ 26s] libacl-2.2.53-1.17 ######################################## [ 27s] tar-1.17-2.1 ######################################## [ 27s] libcap-2.24-1.18 ######################################## [ 27s] libcom_err-1.46.0-1.20 ######################################## [ 27s] libfreebl3-3.98-1.7 ######################################## [ 28s] liblua-5.1.5-1.17 ######################################## [ 28s] libpopt-1.16-1.18 ######################################## [ 28s] libuuid-2.37.4-3.5 ######################################## [ 28s] libzstd1-1.5.2-2.6 ######################################## [ 28s] m4-1.4.19-1.1 ######################################## [ 28s] xz-devel-5.4.0-1.23 ######################################## [ 29s] linux-glibc-devel-3.10-2.5 ######################################## [ 29s] glibc-devel-2.30-1.23 ######################################## [ 29s] zlib-devel-1.3-1.4 ######################################## [ 29s] libattr-devel-2.5.1-2.5 ######################################## [ 29s] libcom_err-devel-1.46.0-1.20 ######################################## [ 29s] libfdisk-2.37.4-3.5 ######################################## [ 30s] libext2fs-1.46.0-1.20 ######################################## [ 30s] libxml2-tools-2.10.2-1.18 ######################################## [ 30s] libncurses5-6.4-2.7 ######################################## [ 30s] ncurses-devel-6.4-2.7 ######################################## [ 30s] readline-devel-5.2-2.5 ######################################## [ 30s] nss-certs-3.98-1.7 ######################################## [ 30s] libmount-2.37.4-3.5 ######################################## [ 30s] libasm-0.189-1.22 ######################################## [ 30s] xz-5.4.0-1.23 ######################################## [ 30s] bzip2-1.0.8-1.17 ######################################## [ 30s] gzip-1.3.12-2.5 ######################################## [ 30s] libcc1-9.2.0-1.23 ######################################## [ 31s] libubsan-9.2.0-1.23 ######################################## [ 31s] make-4.3-1.18 ######################################## [ 31s] findutils-4.3.8-2.5 ######################################## [ 31s] gdbm-1.8.3-2.8 ######################################## [ 34s] perl-5.34.0-1.18 ######################################## [ 34s] build-mkbaselibs-20120927-1.1 ######################################## [ 34s] autoconf-2.71-1.20 ######################################## [ 34s] automake-1.16.5-1.20 ######################################## [ 34s] libgfortran-9.2.0-1.23 ######################################## [ 35s] libgomp-9.2.0-1.23 ######################################## [ 35s] libitm-9.2.0-1.23 ######################################## [ 35s] libltdl-2.4.7-2.8 ######################################## [ 35s] libopenssl11-1.1.1w-2.1 ######################################## [ 36s] libpcre-8.45-2.2 ######################################## [ 36s] libsmack-1.3.1-1.18 ######################################## [ 36s] libsmartcols-2.37.4-3.5 ######################################## [ 37s] libsqlite-3.40.1-1.18 ######################################## [ 37s] libsoftokn3-3.98-1.7 ######################################## [ 37s] nss-3.98-1.7 ######################################## [ 38s] rpm-4.14.1.1-1.21 ######################################## [ 38s] patch-2.7.6-1.18 ######################################## [ 38s] sed-4.1c-2.1 ######################################## [ 38s] util-linux-2.37.4-3.5 ######################################## [ 38s] libatomic-9.2.0-1.23 ######################################## [ 38s] libopenssl1.1-devel-1.1.1w-2.1 ######################################## [ 38s] libtool-2.4.7-2.8 ######################################## [ 39s] build-20120927-1.1 ######################################## [ 39s] libxml2-devel-2.10.2-1.18 ######################################## [ 39s] libext2fs-devel-1.46.0-1.20 ######################################## [ 39s] libacl-devel-2.2.53-1.17 ######################################## [ 39s] bzip2-devel-1.0.8-1.17 ######################################## [ 39s] libncurses-6.4-2.7 ######################################## [ 39s] libstdc++-devel-9.2.0-1.23 ######################################## [ 39s] build-compare-2015.04.28-1.12 ######################################## [ 42s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 44s] gcc-9.2.0-1.23 ######################################## [ 53s] qemu-accel-x86_64-armv7hl-0.4-1.16 ######################################## [ 54s] rpm-build-4.14.1.1-1.21 ######################################## [ 54s] util-linux-su-2.37.4-3.5 ######################################## [ 54s] smack-1.3.1-1.18 ######################################## [ 54s] grep-2.5.2-2.1 ######################################## [ 54s] elfutils-0.189-1.22 ######################################## [ 54s] bison-3.0.5-1.19 ######################################## [ 54s] less-608-1.1 ######################################## [ 54s] file-5.44-1.18 ######################################## [ 54s] glibc-locale-2.30-1.23 ######################################## [ 55s] tzdata-2023c-1.1 ######################################## [ 56s] cpp-9.2.0-1.23 ######################################## [ 57s] gcc-c++-9.2.0-1.23 ######################################## [ 57s] gawk-3.1.5-2.1 ######################################## [ 57s] cpio-2.8-1.1 ######################################## [ 57s] diffutils-3.8-1.1 ######################################## [ 57s] hostname-3.23-1.1 ######################################## [ 57s] net-tools-2.0_20121208git-1.6 ######################################## [ 57s] update-alternatives-1.21.18-2.1 ######################################## [ 57s] which-2.17-1.1 ######################################## [ 59s] now finalizing build dir... [ 61s] ----------------------------------------------------------------- [ 61s] I have the following modifications for libarchive.spec: [ 61s] 4c4 [ 61s] < Release: 0 [ 61s] --- [ 61s] > Release: 2.10 [ 61s] build target is armv7hl-tizen-linux [ 61s] ----------------------------------------------------------------- [ 61s] ----- building libarchive.spec (user abuild) [ 61s] ----------------------------------------------------------------- [ 61s] ----------------------------------------------------------------- [ 62s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-8.0-Base/standard/980f22cbd49862d47430e63b3cc25a87-libarchive' /home/abuild/rpmbuild/SOURCES/libarchive.spec [ 62s] Building target platforms: armv7hl-tizen-linux [ 62s] Building for target armv7hl-tizen-linux [ 62s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.ASl34S [ 62s] + umask 022 [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + cd /home/abuild/rpmbuild/BUILD [ 62s] + rm -rf libarchive-3.6.2 [ 62s] + /bin/tar -xof - [ 62s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/v3.6.2.tar.gz [ 62s] + STATUS=0 [ 62s] + '[' 0 -ne 0 ']' [ 62s] + cd libarchive-3.6.2 [ 62s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 62s] + echo 'Patch #0 (0001-CVE-2023-30571-README-vulnerability-on-implicite-dir.patch):' [ 62s] Patch #0 (0001-CVE-2023-30571-README-vulnerability-on-implicite-dir.patch): [ 62s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 62s] patching file README.md [ 62s] + cp /home/abuild/rpmbuild/SOURCES/libarchive.manifest . [ 62s] + /bin/patch -p1 [ 62s] patching file Makefile.am [ 62s] Hunk #2 succeeded at 286 with fuzz 1. [ 62s] Hunk #3 succeeded at 998 (offset 13 lines). [ 62s] Hunk #4 succeeded at 1163 (offset 14 lines). [ 62s] Hunk #5 succeeded at 1312 (offset 14 lines). [ 62s] + exit 0 [ 62s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.W4dgdU [ 63s] + umask 022 [ 63s] + cd /home/abuild/rpmbuild/BUILD [ 63s] + cd libarchive-3.6.2 [ 63s] ++ uname -m [ 63s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 63s] + LANG=C [ 63s] + export LANG [ 63s] + unset DISPLAY [ 63s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CFLAGS [ 63s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 63s] + export CXXFLAGS [ 63s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 63s] + export FFLAGS [ 63s] + LDFLAGS= [ 63s] + export LDFLAGS [ 63s] + export 'CFLAGS+= -fPIC' [ 63s] + CFLAGS+=' -fPIC' [ 63s] + export 'CXXFLAGS+= -fPIC' [ 63s] + CXXFLAGS+=' -fPIC' [ 63s] + export 'LDFLAGS+= -pie' [ 63s] + LDFLAGS+=' -pie' [ 63s] + autoreconf -fi [ 84s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build/autoconf'. [ 84s] libtoolize: copying file 'build/autoconf/ltmain.sh' [ 85s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'build/autoconf'. [ 85s] libtoolize: copying file 'build/autoconf/libtool.m4' [ 86s] libtoolize: copying file 'build/autoconf/ltoptions.m4' [ 88s] libtoolize: copying file 'build/autoconf/ltsugar.m4' [ 90s] libtoolize: copying file 'build/autoconf/ltversion.m4' [ 91s] libtoolize: copying file 'build/autoconf/lt~obsolete.m4' [ 111s] configure.ac:108: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 111s] configure.ac:108: You should run autoupdate. [ 111s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 111s] configure.ac:108: the top level [ 111s] configure.ac:112: warning: The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. [ 111s] configure.ac:112: You should run autoupdate. [ 111s] build/autoconf/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 111s] configure.ac:112: the top level [ 111s] configure.ac:112: warning: AC_LIBTOOL_WIN32_DLL: Remove this warning and the call to _LT_SET_OPTION when you [ 111s] configure.ac:112: put the 'win32-dll' option into LT_INIT's first parameter. [ 111s] ./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... [ 111s] build/autoconf/ltoptions.m4:148: AC_LIBTOOL_WIN32_DLL is expanded from... [ 111s] configure.ac:112: the top level [ 111s] configure.ac:113: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 111s] configure.ac:113: You should run autoupdate. [ 111s] build/autoconf/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 111s] configure.ac:113: the top level [ 111s] configure.ac:658: warning: The macro `AC_HEADER_TIME' is obsolete. [ 111s] configure.ac:658: You should run autoupdate. [ 111s] ./lib/autoconf/headers.m4:743: AC_HEADER_TIME is expanded from... [ 111s] configure.ac:658: the top level [ 125s] configure.ac:107: installing 'build/autoconf/compile' [ 125s] configure.ac:29: installing 'build/autoconf/missing' [ 126s] Makefile.am: installing 'build/autoconf/depcomp' [ 138s] + AR=gcc-ar [ 138s] + export AR [ 138s] + NM=/bin/nm [ 138s] + export NM [ 138s] + RANLIB=gcc-ranlib [ 138s] + export RANLIB [ 138s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 138s] + export CFLAGS [ 138s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC' [ 138s] + export CXXFLAGS [ 138s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 138s] + export FFLAGS [ 138s] + ./configure --build=armv7hl-tizen-linux-gnueabihf --host=armv7hl-tizen-linux-gnueabihf --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --enable-bsdcpio [ 142s] checking for a BSD-compatible install... /bin/install -c [ 142s] checking whether build environment is sane... yes [ 142s] checking for a race-free mkdir -p... /bin/mkdir -p [ 142s] checking for gawk... gawk [ 142s] checking whether make sets $(MAKE)... yes [ 142s] checking whether make supports nested variables... yes [ 142s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 142s] checking whether make supports nested variables... (cached) yes [ 143s] checking build system type... armv7hl-tizen-linux-gnueabihf [ 143s] checking host system type... armv7hl-tizen-linux-gnueabihf [ 143s] checking for armv7hl-tizen-linux-gnueabihf-gcc... armv7hl-tizen-linux-gnueabihf-gcc [ 144s] checking whether the C compiler works... yes [ 144s] checking for C compiler default output file name... a.out [ 144s] checking for suffix of executables... [ 145s] checking whether we are cross compiling... no [ 145s] checking for suffix of object files... o [ 145s] checking whether the compiler supports GNU C... yes [ 145s] checking whether armv7hl-tizen-linux-gnueabihf-gcc accepts -g... yes [ 145s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to enable C11 features... none needed [ 146s] checking whether armv7hl-tizen-linux-gnueabihf-gcc understands -c and -o together... yes [ 146s] checking whether make supports the include directive... yes (GNU style) [ 147s] checking dependency style of armv7hl-tizen-linux-gnueabihf-gcc... gcc3 [ 147s] checking how to run the C preprocessor... armv7hl-tizen-linux-gnueabihf-gcc -E [ 148s] checking for stdio.h... yes [ 148s] checking for stdlib.h... yes [ 149s] checking for string.h... yes [ 149s] checking for inttypes.h... yes [ 149s] checking for stdint.h... yes [ 149s] checking for strings.h... yes [ 149s] checking for sys/stat.h... yes [ 150s] checking for sys/types.h... yes [ 150s] checking for unistd.h... yes [ 150s] checking for wchar.h... yes [ 151s] checking for minix/config.h... no [ 151s] checking for sys/time.h... yes [ 151s] checking whether it is safe to define __EXTENSIONS__... yes [ 151s] checking whether _XOPEN_SOURCE should be defined... no [ 151s] checking how to print strings... printf [ 151s] checking for a sed that does not truncate output... /bin/sed [ 151s] checking for grep that handles long lines and -e... /bin/grep [ 151s] checking for egrep... /bin/grep -E [ 151s] checking for fgrep... /bin/grep -F [ 152s] checking for ld used by armv7hl-tizen-linux-gnueabihf-gcc... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 152s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 152s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 152s] checking the name lister (/bin/nm) interface... BSD nm [ 152s] checking whether ln -s works... yes [ 152s] checking the maximum length of command line arguments... 1572864 [ 153s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to armv7hl-tizen-linux-gnueabihf format... func_convert_file_noop [ 153s] checking how to convert armv7hl-tizen-linux-gnueabihf file names to toolchain format... func_convert_file_noop [ 153s] checking for /usr/armv7hl-tizen-linux-gnueabihf/bin/ld option to reload object files... -r [ 153s] checking for armv7hl-tizen-linux-gnueabihf-file... no [ 153s] checking for file... file [ 153s] checking for armv7hl-tizen-linux-gnueabihf-objdump... objdump [ 153s] checking how to recognize dependent libraries... pass_all [ 153s] checking for armv7hl-tizen-linux-gnueabihf-dlltool... dlltool [ 153s] checking how to associate runtime and link libraries... printf %s\n [ 153s] checking for armv7hl-tizen-linux-gnueabihf-ar... gcc-ar [ 153s] checking for archiver @FILE support... @ [ 153s] checking for armv7hl-tizen-linux-gnueabihf-strip... no [ 153s] checking for strip... strip [ 153s] checking for armv7hl-tizen-linux-gnueabihf-ranlib... gcc-ranlib [ 154s] checking command to parse /bin/nm output from armv7hl-tizen-linux-gnueabihf-gcc object... ok [ 154s] checking for sysroot... no [ 154s] checking for a working dd... /bin/dd [ 154s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 154s] checking for armv7hl-tizen-linux-gnueabihf-mt... no [ 154s] checking for mt... no [ 154s] checking if : is a manifest tool... no [ 154s] checking for dlfcn.h... yes [ 154s] checking for objdir... .libs [ 155s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -fno-rtti -fno-exceptions... no [ 155s] checking for armv7hl-tizen-linux-gnueabihf-gcc option to produce PIC... -fPIC -DPIC [ 155s] checking if armv7hl-tizen-linux-gnueabihf-gcc PIC flag -fPIC -DPIC works... yes [ 156s] checking if armv7hl-tizen-linux-gnueabihf-gcc static flag -static works... no [ 156s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... yes [ 156s] checking if armv7hl-tizen-linux-gnueabihf-gcc supports -c -o file.o... (cached) yes [ 156s] checking whether the armv7hl-tizen-linux-gnueabihf-gcc linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) supports shared libraries... yes [ 156s] checking whether -lc should be explicitly linked in... no [ 157s] checking dynamic linker characteristics... GNU/Linux ld.so [ 157s] checking how to hardcode library paths into programs... immediate [ 157s] checking whether stripping libraries is possible... yes [ 157s] checking if libtool supports shared libraries... yes [ 157s] checking whether to build shared libraries... yes [ 157s] checking whether to build static libraries... no [ 157s] checking for armv7hl-tizen-linux-gnueabihf-strip... strip [ 157s] checking for dirent.h that defines DIR... yes [ 158s] checking for library containing opendir... none required [ 158s] checking for sys/wait.h that is POSIX.1 compatible... yes [ 158s] checking for acl/libacl.h... yes [ 158s] checking for attr/xattr.h... no [ 158s] checking for copyfile.h... no [ 159s] checking for ctype.h... yes [ 159s] checking for errno.h... yes [ 159s] checking for ext2fs/ext2_fs.h... yes [ 159s] checking for fcntl.h... yes [ 159s] checking for grp.h... yes [ 160s] checking whether EXT2_IOC_GETFLAGS is usable... yes [ 160s] checking for inttypes.h... (cached) yes [ 160s] checking for io.h... no [ 160s] checking for langinfo.h... yes [ 160s] checking for limits.h... yes [ 160s] checking for linux/fiemap.h... yes [ 161s] checking for linux/fs.h... yes [ 161s] checking for linux/magic.h... yes [ 161s] checking for linux/types.h... yes [ 161s] checking whether FS_IOC_GETFLAGS is usable... yes [ 161s] checking for locale.h... yes [ 162s] checking for membership.h... no [ 162s] checking for paths.h... yes [ 162s] checking for poll.h... yes [ 162s] checking for pthread.h... yes [ 163s] checking for pwd.h... yes [ 163s] checking for readpassphrase.h... no [ 163s] checking for signal.h... yes [ 163s] checking for spawn.h... yes [ 163s] checking for stdarg.h... yes [ 163s] checking for stdint.h... (cached) yes [ 163s] checking for stdlib.h... (cached) yes [ 163s] checking for string.h... (cached) yes [ 164s] checking for sys/acl.h... yes [ 164s] checking for sys/cdefs.h... yes [ 164s] checking for sys/ea.h... no [ 164s] checking for sys/extattr.h... no [ 165s] checking for sys/ioctl.h... yes [ 165s] checking for sys/mkdev.h... no [ 165s] checking for sys/mount.h... yes [ 165s] checking for sys/param.h... yes [ 166s] checking for sys/poll.h... yes [ 166s] checking for sys/richacl.h... no [ 166s] checking for sys/select.h... yes [ 167s] checking for sys/statfs.h... yes [ 167s] checking for sys/statvfs.h... yes [ 167s] checking for sys/sysmacros.h... yes [ 167s] checking for sys/time.h... (cached) yes [ 167s] checking for sys/utime.h... no [ 168s] checking for sys/utsname.h... yes [ 168s] checking for sys/vfs.h... yes [ 168s] checking for sys/xattr.h... yes [ 168s] checking for time.h... yes [ 168s] checking for unistd.h... (cached) yes [ 169s] checking for utime.h... yes [ 169s] checking for wchar.h... (cached) yes [ 169s] checking for wctype.h... yes [ 169s] checking for windows.h... no [ 169s] checking for wincrypt.h... no [ 170s] checking for winioctl.h... no [ 170s] checking for zlib.h... yes [ 170s] checking for inflate in -lz... yes [ 171s] checking for bzlib.h... yes [ 171s] checking for BZ2_bzDecompressInit in -lbz2... yes [ 171s] checking for blake2.h... no [ 172s] checking for blake2sp_init in -lb2... no [ 172s] checking for ld used by GCC... /usr/armv7hl-tizen-linux-gnueabihf/bin/ld [ 172s] checking if the linker (/usr/armv7hl-tizen-linux-gnueabihf/bin/ld) is GNU ld... yes [ 173s] checking for shared library run path origin... done [ 174s] checking for iconv... yes [ 174s] checking for working iconv... yes [ 175s] checking for iconv declaration... [ 175s] extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); [ 175s] checking for iconv.h... yes [ 175s] checking for localcharset.h... no [ 176s] checking for locale_charset... no [ 176s] checking for locale_charset in -lcharset... no [ 176s] checking for lz4.h... no [ 177s] checking for lz4hc.h... no [ 177s] checking for LZ4_decompress_safe in -llz4... no [ 178s] checking for zstd.h... no [ 178s] checking for ZSTD_decompressStream in -lzstd... no [ 178s] checking for ZSTD_compressStream in -lzstd... no [ 179s] checking for lzma.h... yes [ 179s] checking for lzma_stream_decoder in -llzma... yes [ 179s] checking whether we have multithread support in lzma... yes [ 179s] checking for armv7hl-tizen-linux-gnueabihf-pkg-config... /bin/armv7hl-tizen-linux-gnueabihf-pkg-config [ 180s] checking pkg-config is at least version 0.9.0... yes [ 180s] checking for libxml-2.0... yes [ 180s] checking for xmlInitParser in -lxml2... yes [ 181s] checking for libxml/xmlreader.h... yes [ 181s] checking for libxml/xmlwriter.h... yes [ 181s] checking for regex.h... yes [ 181s] checking for regcomp... yes [ 182s] checking whether C compiler accepts -Wall... yes [ 182s] checking whether C compiler accepts -Wformat... yes [ 182s] checking whether C compiler accepts -Wformat-security... yes [ 183s] checking whether ld supports --gc-sections... yes [ 183s] checking whether C compiler accepts -ffunction-sections... yes [ 183s] checking whether C compiler accepts -fdata-sections... yes [ 183s] checking for an ANSI C-conforming const... yes [ 184s] checking for uid_t in sys/types.h... yes [ 184s] checking for mode_t... yes [ 185s] checking for off_t... yes [ 185s] checking for size_t... yes [ 186s] checking for id_t... yes [ 186s] checking for uintptr_t... yes [ 186s] checking for struct tm.tm_gmtoff... yes [ 187s] checking for struct tm.__tm_gmtoff... no [ 187s] checking for struct statfs.f_namemax... no [ 188s] checking for struct statfs.f_iosize... no [ 188s] checking for struct statvfs.f_iosize... no [ 188s] checking for struct stat.st_birthtime... no [ 189s] checking for struct stat.st_birthtimespec.tv_nsec... no [ 189s] checking for struct stat.st_mtimespec.tv_nsec... no [ 190s] checking for struct stat.st_mtim.tv_nsec... yes [ 190s] checking for struct stat.st_mtime_n... no [ 191s] checking for struct stat.st_umtime... no [ 191s] checking for struct stat.st_mtime_usec... no [ 192s] checking for struct stat.st_blksize... yes [ 192s] checking for struct stat.st_flags... no [ 193s] checking for uintmax_t... yes [ 193s] checking for unsigned long long... yes [ 193s] checking for unsigned long long int... yes [ 194s] checking for long long int... yes [ 194s] checking for intmax_t... yes [ 194s] checking for uintmax_t... (cached) yes [ 194s] checking for int64_t... yes [ 195s] checking for uint64_t... yes [ 195s] checking for int32_t... yes [ 195s] checking for uint32_t... yes [ 196s] checking for int16_t... yes [ 196s] checking for uint16_t... yes [ 196s] checking for uint8_t... yes [ 196s] checking for armv7hl-tizen-linux-gnueabihf-gcc options needed to detect all undeclared functions... none needed [ 197s] checking whether SIZE_MAX is declared... yes [ 197s] checking whether INT32_MAX is declared... yes [ 197s] checking whether INT32_MIN is declared... yes [ 197s] checking whether INT64_MAX is declared... yes [ 198s] checking whether INT64_MIN is declared... yes [ 198s] checking whether UINT64_MAX is declared... yes [ 198s] checking whether UINT32_MAX is declared... yes [ 198s] checking whether INTMAX_MAX is declared... yes [ 199s] checking whether INTMAX_MIN is declared... yes [ 199s] checking whether UINTMAX_MAX is declared... yes [ 199s] checking whether SSIZE_MAX is declared... yes [ 199s] checking whether EFTYPE is declared... no [ 199s] checking whether EILSEQ is declared... yes [ 200s] checking for wchar_t... yes [ 200s] checking size of wchar_t... 4 [ 200s] checking size of int... 4 [ 200s] checking size of long... 4 [ 200s] checking whether armv7hl-tizen-linux-gnueabihf-gcc needs -traditional... no [ 200s] checking for sys/mkdev.h... (cached) no [ 200s] checking for sys/sysmacros.h... (cached) yes [ 201s] checking for _LARGEFILE_SOURCE value needed for large files... no [ 201s] checking for working memcmp... yes [ 201s] checking whether lstat correctly handles trailing slash... yes [ 201s] checking whether lstat accepts an empty string... no [ 202s] checking whether stat accepts an empty string... no [ 202s] checking whether strerror_r is declared... yes [ 202s] checking whether strerror_r returns char *... yes [ 202s] checking for strftime... yes [ 203s] checking for vprintf... yes [ 203s] checking for CreateHardLinkA... no [ 203s] checking for arc4random_buf... no [ 204s] checking for chflags... no [ 204s] checking for chown... yes [ 204s] checking for chroot... yes [ 204s] checking for ctime_r... yes [ 204s] checking for fchdir... yes [ 205s] checking for fchflags... no [ 205s] checking for fchmod... yes [ 205s] checking for fchown... yes [ 205s] checking for fcntl... yes [ 205s] checking for fdopendir... yes [ 206s] checking for fork... yes [ 206s] checking for fstat... yes [ 206s] checking for fstatat... yes [ 206s] checking for fstatfs... yes [ 207s] checking for fstatvfs... yes [ 207s] checking for ftruncate... yes [ 207s] checking for futimens... yes [ 207s] checking for futimes... yes [ 208s] checking for futimesat... yes [ 208s] checking for geteuid... yes [ 208s] checking for getpid... yes [ 208s] checking for getgrgid_r... yes [ 208s] checking for getgrnam_r... yes [ 208s] checking for getpwnam_r... yes [ 208s] checking for getpwuid_r... yes [ 209s] checking for getvfsbyname... no [ 209s] checking for gmtime_r... yes [ 209s] checking for lchflags... no [ 209s] checking for lchmod... no [ 209s] checking for lchown... yes [ 209s] checking for link... yes [ 209s] checking for linkat... yes [ 209s] checking for localtime_r... yes [ 210s] checking for lstat... yes [ 210s] checking for lutimes... yes [ 210s] checking for mbrtowc... yes [ 210s] checking for memmove... yes [ 211s] checking for memset... yes [ 211s] checking for mkdir... yes [ 211s] checking for mkfifo... yes [ 211s] checking for mknod... yes [ 211s] checking for mkstemp... yes [ 212s] checking for nl_langinfo... yes [ 212s] checking for openat... yes [ 212s] checking for pipe... yes [ 212s] checking for poll... yes [ 212s] checking for posix_spawnp... yes [ 213s] checking for readlink... yes [ 213s] checking for readlinkat... yes [ 213s] checking for readpassphrase... no [ 213s] checking for select... yes [ 213s] checking for setenv... yes [ 214s] checking for setlocale... yes [ 214s] checking for sigaction... yes [ 214s] checking for statfs... yes [ 214s] checking for statvfs... yes [ 214s] checking for strchr... yes [ 215s] checking for strdup... yes [ 215s] checking for strerror... yes [ 215s] checking for strncpy_s... no [ 215s] checking for strnlen... yes [ 215s] checking for strrchr... yes [ 216s] checking for symlink... yes [ 216s] checking for timegm... yes [ 216s] checking for tzset... yes [ 216s] checking for unlinkat... yes [ 216s] checking for unsetenv... yes [ 216s] checking for utime... yes [ 216s] checking for utimensat... yes [ 217s] checking for utimes... yes [ 217s] checking for vfork... yes [ 217s] checking for wcrtomb... yes [ 217s] checking for wcscmp... yes [ 218s] checking for wcscpy... yes [ 218s] checking for wcslen... yes [ 218s] checking for wctomb... yes [ 218s] checking for wmemcmp... yes [ 219s] checking for wmemcpy... yes [ 219s] checking for wmemmove... yes [ 219s] checking for _ctime64_s... no [ 220s] checking for _fseeki64... no [ 220s] checking for _get_timezone... no [ 221s] checking for _gmtime64_s... no [ 221s] checking for _localtime64_s... no [ 222s] checking for _mkgmtime64... no [ 222s] checking for cygwin_conv_path... no [ 222s] checking for struct vfsconf... no [ 222s] checking for struct xvfsconf... no [ 223s] checking for struct statfs... no [ 223s] checking whether D_MD_ORDER is declared... no [ 224s] checking for struct dirent.d_namlen... no [ 224s] checking for library containing setxattr... none required [ 224s] checking whether EXTATTR_NAMESPACE_USER is declared... no [ 224s] checking whether XATTR_NOFOLLOW is declared... no [ 224s] checking for fgetxattr... yes [ 225s] checking for flistxattr... yes [ 225s] checking for fsetxattr... yes [ 225s] checking for getxattr... yes [ 226s] checking for lgetxattr... yes [ 226s] checking for listxattr... yes [ 226s] checking for llistxattr... yes [ 227s] checking for lsetxattr... yes [ 227s] checking for extended attributes support... Linux [ 227s] checking for acl_get_file in -lacl... yes [ 227s] checking for acl_t... yes [ 228s] checking for acl_entry_t... yes [ 229s] checking for acl_permset_t... yes [ 229s] checking for acl_tag_t... yes [ 229s] checking for richacl_get_file in -lrichacl... no [ 230s] checking for struct richace... no [ 230s] checking for struct richacl... no [ 230s] checking for acl... no [ 231s] checking for facl... no [ 231s] checking for acl_add_perm... yes [ 231s] checking for acl_clear_perms... yes [ 232s] checking for acl_create_entry... yes [ 232s] checking for acl_delete_def_file... yes [ 233s] checking for acl_free... yes [ 233s] checking for acl_get_entry... yes [ 233s] checking for acl_get_fd... yes [ 234s] checking for acl_get_file... yes [ 234s] checking for acl_get_permset... yes [ 234s] checking for acl_get_qualifier... yes [ 234s] checking for acl_get_tag_type... yes [ 235s] checking for acl_init... yes [ 235s] checking for acl_set_fd... yes [ 235s] checking for acl_set_file... yes [ 236s] checking for acl_set_qualifier... yes [ 236s] checking for acl_set_tag_type... yes [ 236s] checking for acl_get_perm... yes [ 236s] checking for ACL support... libacl (POSIX.1e) [ 236s] checking for special C compiler options needed for large files... no [ 236s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 237s] checking support for ARCHIVE_CRYPTO_MD5_LIBC... no [ 237s] checking support for ARCHIVE_CRYPTO_MD5_LIBSYSTEM... no [ 237s] checking support for ARCHIVE_CRYPTO_RMD160_LIBC... no [ 237s] checking support for ARCHIVE_CRYPTO_SHA1_LIBC... no [ 238s] checking support for ARCHIVE_CRYPTO_SHA1_LIBSYSTEM... no [ 238s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC... no [ 238s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC2... no [ 238s] checking support for ARCHIVE_CRYPTO_SHA256_LIBC3... no [ 239s] checking support for ARCHIVE_CRYPTO_SHA256_LIBSYSTEM... no [ 239s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC... no [ 240s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC2... no [ 240s] checking support for ARCHIVE_CRYPTO_SHA384_LIBC3... no [ 240s] checking support for ARCHIVE_CRYPTO_SHA384_LIBSYSTEM... no [ 241s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC... no [ 241s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC2... no [ 242s] checking support for ARCHIVE_CRYPTO_SHA512_LIBC3... no [ 242s] checking support for ARCHIVE_CRYPTO_SHA512_LIBSYSTEM... no [ 242s] checking for bcrypt.h... no [ 243s] checking for openssl/evp.h... yes [ 243s] checking for OPENSSL_config in -lcrypto... yes [ 243s] checking support for ARCHIVE_CRYPTO_MD5_OPENSSL... yes [ 244s] checking support for ARCHIVE_CRYPTO_RMD160_OPENSSL... yes [ 245s] checking support for ARCHIVE_CRYPTO_SHA1_OPENSSL... yes [ 245s] checking support for ARCHIVE_CRYPTO_SHA256_OPENSSL... yes [ 246s] checking support for ARCHIVE_CRYPTO_SHA384_OPENSSL... yes [ 247s] checking support for ARCHIVE_CRYPTO_SHA512_OPENSSL... yes [ 247s] checking for PKCS5_PBKDF2_HMAC_SHA1... yes [ 248s] checking for md5.h... no [ 248s] checking for ripemd.h... no [ 248s] checking for sha.h... no [ 248s] checking for sha256.h... no [ 249s] checking for sha512.h... no [ 249s] checking for MD5Init in -lmd... no [ 249s] checking whether compiler supports visibility annotations... yes [ 250s] checking that generated files are newer than configure... done [ 250s] configure: creating ./config.status [ 257s] config.status: creating Makefile [ 257s] config.status: creating build/pkgconfig/libarchive.pc [ 258s] config.status: creating config.h [ 258s] config.status: executing depfiles commands [ 321s] config.status: executing libtool commands [ 321s] config.status: executing mkdirs commands [ 321s] + /bin/make -j12 [ 321s] /bin/mkdir -p libarchive/test [ 321s] /bin/mkdir -p tar/test [ 321s] /bin/mkdir -p cpio/test [ 321s] cat ./libarchive/test/test_*.c | grep '^DEFINE_TEST' > libarchive/test/list.h [ 321s] cat ./tar/test/test_*.c | grep '^DEFINE_TEST' > tar/test/list.h [ 321s] cat ./cpio/test/test_*.c | grep '^DEFINE_TEST' > cpio/test/list.h [ 321s] cat ./cat/test/test_*.c | grep '^DEFINE_TEST' > cat/test/list.h [ 322s] /bin/make all-am [ 322s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 322s] CC tar/bsdtar-bsdtar.o [ 322s] CC tar/bsdtar-creation_set.o [ 322s] CC tar/bsdtar-read.o [ 322s] CC tar/bsdtar-subst.o [ 322s] CC libarchive/archive_acl.lo [ 322s] CC tar/bsdtar-cmdline.o [ 322s] CC tar/bsdtar-write.o [ 322s] CC tar/bsdtar-util.o [ 322s] CC libarchive/archive_check_magic.lo [ 322s] CC libarchive/archive_cryptor.lo [ 322s] CC libarchive/archive_cmdline.lo [ 322s] CC libarchive/archive_digest.lo [ 322s] CC libarchive/archive_entry.lo [ 322s] CC libarchive/archive_entry_copy_stat.lo [ 322s] CC libarchive/archive_entry_link_resolver.lo [ 322s] CC libarchive/archive_entry_sparse.lo [ 322s] CC libarchive/archive_entry_stat.lo [ 322s] CC libarchive/archive_entry_strmode.lo [ 322s] CC libarchive/archive_entry_xattr.lo [ 323s] CC libarchive/archive_getdate.lo [ 323s] CC libarchive/archive_hmac.lo [ 323s] CC libarchive/archive_match.lo [ 323s] CC libarchive/archive_options.lo [ 323s] CC libarchive/archive_pack_dev.lo [ 323s] CC libarchive/archive_pathmatch.lo [ 324s] CC libarchive/archive_ppmd7.lo [ 324s] CC libarchive/archive_ppmd8.lo [ 324s] CC libarchive/archive_random.lo [ 324s] CC libarchive/archive_rb.lo [ 324s] CC libarchive/archive_read.lo [ 325s] CC libarchive/archive_read_add_passphrase.lo [ 325s] CC libarchive/archive_read_append_filter.lo [ 325s] CC libarchive/archive_read_data_into_fd.lo [ 325s] CC libarchive/archive_read_disk_posix.lo [ 325s] CC libarchive/archive_read_disk_entry_from_file.lo [ 325s] CC libarchive/archive_read_disk_set_standard_lookup.lo [ 326s] CC libarchive/archive_read_extract.lo [ 326s] CC libarchive/archive_read_extract2.lo [ 326s] CC libarchive/archive_read_open_fd.lo [ 326s] CC libarchive/archive_read_open_file.lo [ 326s] CC libarchive/archive_read_open_filename.lo [ 326s] CC libarchive/archive_read_open_memory.lo [ 326s] CC libarchive/archive_read_set_format.lo [ 327s] CC libarchive/archive_read_set_options.lo [ 327s] CC libarchive/archive_read_support_filter_all.lo [ 327s] CC libarchive/archive_read_support_filter_bzip2.lo [ 327s] CC libarchive/archive_read_support_filter_by_code.lo [ 327s] CC libarchive/archive_read_support_filter_compress.lo [ 327s] CC libarchive/archive_read_support_filter_grzip.lo [ 327s] CC libarchive/archive_read_support_filter_gzip.lo [ 327s] CC libarchive/archive_read_support_filter_lrzip.lo [ 327s] CC libarchive/archive_read_support_filter_lz4.lo [ 327s] CC libarchive/archive_read_support_filter_lzop.lo [ 328s] CC libarchive/archive_read_support_filter_none.lo [ 328s] CC libarchive/archive_read_support_filter_program.lo [ 328s] CC libarchive/archive_read_support_filter_rpm.lo [ 328s] CC libarchive/archive_read_support_filter_uu.lo [ 328s] CC libarchive/archive_read_support_filter_xz.lo [ 328s] CC libarchive/archive_read_support_filter_zstd.lo [ 328s] CC libarchive/archive_read_support_format_7zip.lo [ 328s] CC libarchive/archive_read_support_format_all.lo [ 329s] CC libarchive/archive_read_support_format_ar.lo [ 329s] CC libarchive/archive_read_support_format_by_code.lo [ 329s] CC libarchive/archive_read_support_format_cab.lo [ 329s] CC libarchive/archive_read_support_format_cpio.lo [ 329s] CC libarchive/archive_read_support_format_empty.lo [ 329s] CC libarchive/archive_read_support_format_iso9660.lo [ 329s] CC libarchive/archive_read_support_format_lha.lo [ 329s] CC libarchive/archive_read_support_format_mtree.lo [ 329s] CC libarchive/archive_read_support_format_rar5.lo [ 329s] CC libarchive/archive_read_support_format_rar.lo [ 329s] CC libarchive/archive_read_support_format_raw.lo [ 330s] CC libarchive/archive_read_support_format_tar.lo [ 330s] CC libarchive/archive_read_support_format_warc.lo [ 330s] CC libarchive/archive_read_support_format_xar.lo [ 330s] CC libarchive/archive_read_support_format_zip.lo [ 330s] CC libarchive/archive_string.lo [ 331s] CC libarchive/archive_string_sprintf.lo [ 331s] CC libarchive/archive_util.lo [ 331s] CC libarchive/archive_version_details.lo [ 331s] CC libarchive/archive_virtual.lo [ 331s] CC libarchive/archive_write.lo [ 331s] CC libarchive/archive_write_disk_posix.lo [ 332s] CC libarchive/archive_write_disk_set_standard_lookup.lo [ 332s] CC libarchive/archive_write_open_fd.lo [ 332s] CC libarchive/archive_write_open_file.lo [ 332s] CC libarchive/archive_write_open_filename.lo [ 332s] CC libarchive/archive_write_open_memory.lo [ 332s] CC libarchive/archive_write_add_filter.lo [ 332s] CC libarchive/archive_write_add_filter_b64encode.lo [ 332s] CC libarchive/archive_write_add_filter_by_name.lo [ 333s] CC libarchive/archive_write_add_filter_bzip2.lo [ 333s] CC libarchive/archive_write_add_filter_compress.lo [ 333s] CC libarchive/archive_write_add_filter_grzip.lo [ 333s] CC libarchive/archive_write_add_filter_gzip.lo [ 333s] CC libarchive/archive_write_add_filter_lrzip.lo [ 333s] CC libarchive/archive_write_add_filter_lz4.lo [ 333s] CC libarchive/archive_write_add_filter_lzop.lo [ 333s] CC libarchive/archive_write_add_filter_none.lo [ 333s] CC libarchive/archive_write_add_filter_program.lo [ 333s] CC libarchive/archive_write_add_filter_uuencode.lo [ 333s] CC libarchive/archive_write_add_filter_xz.lo [ 333s] CC libarchive/archive_write_add_filter_zstd.lo [ 334s] CC libarchive/archive_write_set_format.lo [ 334s] CC libarchive/archive_write_set_format_7zip.lo [ 334s] CC libarchive/archive_write_set_format_ar.lo [ 334s] CC libarchive/archive_write_set_format_by_name.lo [ 334s] CC libarchive/archive_write_set_format_cpio.lo [ 334s] CC libarchive/archive_write_set_format_cpio_binary.lo [ 334s] CC libarchive/archive_write_set_format_cpio_newc.lo [ 334s] CC libarchive/archive_write_set_format_cpio_odc.lo [ 334s] CC libarchive/archive_write_set_format_filter_by_ext.lo [ 334s] CC libarchive/archive_write_set_format_iso9660.lo [ 335s] CC libarchive/archive_write_set_format_mtree.lo [ 335s] CC libarchive/archive_write_set_format_pax.lo [ 335s] CC libarchive/archive_write_set_format_raw.lo [ 335s] CC libarchive/archive_write_set_format_shar.lo [ 335s] CC libarchive/archive_write_set_format_ustar.lo [ 335s] CC libarchive/archive_write_set_format_v7tar.lo [ 335s] CC libarchive/archive_write_set_format_gnutar.lo [ 335s] CC libarchive/archive_write_set_format_warc.lo [ 335s] CC libarchive/archive_write_set_format_xar.lo [ 336s] CC libarchive/archive_write_set_format_zip.lo [ 336s] CC libarchive/archive_write_set_options.lo [ 336s] CC libarchive/archive_write_set_passphrase.lo [ 336s] CC libarchive/filter_fork_posix.lo [ 336s] CC libarchive/xxhash.lo [ 336s] CC libarchive/archive_blake2s_ref.lo [ 336s] CC libarchive/archive_blake2sp_ref.lo [ 336s] CC libarchive/archive_disk_acl_linux.lo [ 336s] CC libarchive_fe/la-err.lo [ 337s] CC libarchive_fe/la-line_reader.lo [ 337s] CC libarchive_fe/la-passphrase.lo [ 337s] CC cpio/bsdcpio-cmdline.o [ 337s] CC cpio/bsdcpio-cpio.o [ 337s] CC cat/bsdcat-bsdcat.o [ 337s] CC cat/bsdcat-cmdline.o [ 338s] CCLD libarchive.la [ 338s] CCLD libarchive_fe.la [ 342s] CCLD bsdcat [ 342s] CCLD bsdcpio [ 342s] CCLD bsdtar [ 344s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 344s] + exit 0 [ 344s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.nSFiEQ [ 344s] + umask 022 [ 344s] + cd /home/abuild/rpmbuild/BUILD [ 344s] + cd libarchive-3.6.2 [ 344s] + LANG=C [ 344s] + export LANG [ 344s] + unset DISPLAY [ 344s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm [ 344s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm [ 345s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm install [ 345s] /bin/make install-am [ 345s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 345s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 345s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib' [ 345s] /bin/sh ./libtool --mode=install /bin/install -c libarchive.la '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib' [ 346s] libtool: install: /bin/install -c .libs/libarchive.so.13.6.2 /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib/libarchive.so.13.6.2 [ 346s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib && { ln -s -f libarchive.so.13.6.2 libarchive.so.13 || { rm -f libarchive.so.13 && ln -s libarchive.so.13.6.2 libarchive.so.13; }; }) [ 346s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib && { ln -s -f libarchive.so.13.6.2 libarchive.so || { rm -f libarchive.so && ln -s libarchive.so.13.6.2 libarchive.so; }; }) [ 346s] libtool: install: /bin/install -c .libs/libarchive.lai /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib/libarchive.la [ 346s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 346s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin' [ 346s] /bin/sh ./libtool --mode=install /bin/install -c bsdtar bsdcpio bsdcat '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin' [ 347s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 347s] libtool: install: /bin/install -c .libs/bsdtar /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdtar [ 347s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 347s] libtool: install: /bin/install -c .libs/bsdcpio /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdcpio [ 347s] libtool: warning: 'libarchive.la' has not been installed in '/usr/lib' [ 347s] libtool: install: /bin/install -c .libs/bsdcat /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdcat [ 347s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/include' [ 347s] /bin/install -c -m 644 libarchive/archive.h libarchive/archive_entry.h '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/include' [ 347s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib/pkgconfig' [ 347s] /bin/install -c -m 644 build/pkgconfig/libarchive.pc '/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib/pkgconfig' [ 348s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 348s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libarchive-3.6.2' [ 348s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/info/dir [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm -regex '.*\.la$' [ 348s] + xargs rm -f -- [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm -regex '.*\.a$' [ 348s] + xargs rm -f -- [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm -name cpio.5 -exec rm -f '{}' ';' [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm -name mtree.5 -exec rm -f '{}' ';' [ 348s] + find /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm -name tar.5 -exec rm -f '{}' ';' [ 348s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 3.6.2-2.10 --unique-debug-src-base libarchive-3.6.2-2.10.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libarchive-3.6.2 [ 348s] 1+0 records in [ 348s] 1+0 records out [ 348s] 7 bytes (7 B) copied, 0.000837266 s, 8.4 kB/s [ 348s] 1+0 records in [ 348s] 1+0 records out [ 348s] 7 bytes (7 B) copied, 0.000966937 s, 7.2 kB/s [ 348s] 1+0 records in [ 348s] 1+0 records out [ 348s] 1+0 records in [ 348s] 1+0 records out [ 348s] 7 bytes (7 B) copied7 bytes (7 B) copied, 0.000826359 s, 8.5 kB/s [ 348s] , 0.000899986 s, 7.8 kB/s [ 349s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/lib/libarchive.so.13.6.2 [ 349s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdtar [ 349s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdcpio [ 349s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/bin/bsdcat [ 349s] 0+0 records in [ 349s] 0+0 records out [ 349s] 0 bytes (0 B) copied, 0.000731297 s, 0.0 kB/s [ 349s] 0+0 records in [ 349s] 0+0 records out [ 349s] 0 bytes (0 B) copied, 0.000678624 s, 0.0 kB/s [ 349s] 0+0 records in [ 349s] 0+0 records out [ 349s] 0 bytes (0 B) copied, 0.000629267 s, 0.0 kB/s [ 349s] 0+0 records in [ 349s] 0+0 records out [ 349s] 0 bytes (0 B) copied, 0.000664557 s, 0.0 kB/s [ 349s] 6852 blocks [ 349s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.6.2/libarchive-debuginfo.manifest [ 349s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libarchive-3.6.2/libarchive-debugsource.manifest [ 349s] + /usr/lib/rpm/check-buildroot [ 349s] + /usr/lib/rpm//brp-compress [ 349s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 351s] + /usr/lib/rpm/brp-python-hardlink [ 351s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm [ 351s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libarchive-3.6.2/isu.list [ 351s] ~/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm ~/rpmbuild/BUILD/libarchive-3.6.2 [ 351s] ~/rpmbuild/BUILD/libarchive-3.6.2 [ 351s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.295QpS [ 351s] + umask 022 [ 351s] + cd /home/abuild/rpmbuild/BUILD [ 351s] + cd libarchive-3.6.2 [ 351s] + exit 0 [ 351s] Processing files: libarchive-3.6.2-2.10.armv7hl [ 351s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 351s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 351s] [ 351s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.fpPrQQ [ 351s] + umask 022 [ 351s] + cd /home/abuild/rpmbuild/BUILD [ 351s] + cd libarchive-3.6.2 [ 351s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive [ 351s] + export LC_ALL=C [ 351s] + LC_ALL=C [ 351s] + export LICENSEDIR [ 351s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive [ 351s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive [ 351s] + exit 0 [ 351s] Provides: libarchive = 3.6.2-2.10 libarchive(armv7hl-32) = 3.6.2-2.10 libarchive.so.13 [ 351s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 351s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 351s] Requires(post): /sbin/ldconfig [ 351s] Requires(postun): /sbin/ldconfig [ 351s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libacl.so.1 libacl.so.1(ACL_1.0) libbz2.so.1 libc.so.6 libc.so.6(GLIBC_2.15) libc.so.6(GLIBC_2.16) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.6) libc.so.6(GLIBC_2.7) libcrypto.so.1.1 libcrypto.so.1.1(OPENSSL_1_1_0) libdl.so.2 libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) liblzma.so.5 liblzma.so.5(XZ_5.0) liblzma.so.5(XZ_5.2) libm.so.6 libxml2.so.2 libxml2.so.2(LIBXML2_2.4.30) libxml2.so.2(LIBXML2_2.5.0) libxml2.so.2(LIBXML2_2.5.2) libxml2.so.2(LIBXML2_2.6.0) libxml2.so.2(LIBXML2_2.6.5) libz.so.1 rtld(GNU_HASH) [ 351s] Processing files: libarchive-debugsource-3.6.2-2.10.armv7hl [ 351s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 351s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 351s] [ 352s] Provides: libarchive-debugsource = 3.6.2-2.10 libarchive-debugsource(armv7hl-32) = 3.6.2-2.10 [ 352s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 352s] Processing files: libarchive-tools-3.6.2-2.10.armv7hl [ 352s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 352s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 352s] [ 352s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.VT8sBS [ 352s] + umask 022 [ 352s] + cd /home/abuild/rpmbuild/BUILD [ 352s] + cd libarchive-3.6.2 [ 352s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive-tools [ 352s] + export LC_ALL=C [ 352s] + LC_ALL=C [ 352s] + export LICENSEDIR [ 352s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive-tools [ 352s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm/usr/share/licenses/libarchive-tools [ 352s] + exit 0 [ 352s] Provides: libarchive-tools = 3.6.2-2.10 libarchive-tools(armv7hl-32) = 3.6.2-2.10 [ 352s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 352s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libarchive.so.13 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 352s] Processing files: libarchive-devel-3.6.2-2.10.armv7hl [ 352s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 352s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 352s] [ 353s] Provides: libarchive-devel = 3.6.2-2.10 libarchive-devel(armv7hl-32) = 3.6.2-2.10 pkgconfig(libarchive) = 3.6.2 [ 353s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 353s] Requires: /usr/bin/pkg-config libarchive.so.13 [ 353s] Processing files: libarchive-debuginfo-3.6.2-2.10.armv7hl [ 353s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 353s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 353s] [ 353s] Provides: libarchive-debuginfo = 3.6.2-2.10 libarchive-debuginfo(armv7hl-32) = 3.6.2-2.10 [ 353s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 353s] Recommends: libarchive-debugsource(armv7hl-32) = 3.6.2-2.10 [ 353s] Processing files: libarchive-tools-debuginfo-3.6.2-2.10.armv7hl [ 353s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 353s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 353s] [ 353s] Provides: libarchive-tools-debuginfo = 3.6.2-2.10 libarchive-tools-debuginfo(armv7hl-32) = 3.6.2-2.10 [ 353s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 353s] Recommends: libarchive-debugsource(armv7hl-32) = 3.6.2-2.10 [ 353s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm [ 354s] Wrote: /home/abuild/rpmbuild/SRPMS/libarchive-3.6.2-2.10.src.rpm [ 354s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-3.6.2-2.10.armv7hl.rpm [ 356s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-debugsource-3.6.2-2.10.armv7hl.rpm [ 356s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-tools-3.6.2-2.10.armv7hl.rpm [ 356s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-devel-3.6.2-2.10.armv7hl.rpm [ 358s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-debuginfo-3.6.2-2.10.armv7hl.rpm [ 358s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/libarchive-tools-debuginfo-3.6.2-2.10.armv7hl.rpm [ 358s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.cRWn9Q [ 358s] + umask 022 [ 358s] + cd /home/abuild/rpmbuild/BUILD [ 358s] + cd libarchive-3.6.2 [ 358s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libarchive-3.6.2-2.10.arm [ 358s] + exit 0 [ 358s] ... checking for files with abuild user/group [ 358s] ... creating baselibs [ 359s] [ 359s] aaea13ff65b4 finished "build libarchive.spec" at Tue Nov 26 02:19:47 UTC 2024. [ 359s]