[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 3fdf47d30e82 started "build perl-DBD-SQLite.spec" at Thu Sep 14 17:36:55 UTC 2023. [ 0s] [ 0s] Building perl-DBD-SQLite for project 'Tizen-8.0-Base' repository 'standard' arch 'armv7hl' srcmd5 'f1a95b026c252b75effb9b95c43acab5' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-DBD-SQLite.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-DBD-SQLite.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/19/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/perl-DBD-SQLite.spec build ... [ 0s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling bash... [ 1s] [8/41] preinstalling diffutils... [ 1s] [9/41] preinstalling grep... [ 1s] [10/41] preinstalling libattr... [ 1s] [11/41] preinstalling libblkid... [ 1s] [12/41] preinstalling libbz2... [ 1s] [13/41] preinstalling libcap... [ 1s] [14/41] preinstalling libfreebl3... [ 1s] [15/41] preinstalling liblua... [ 2s] [16/41] preinstalling liblzma... [ 2s] [17/41] preinstalling libpopt... [ 2s] [18/41] preinstalling libreadline... [ 2s] [19/41] preinstalling libsmack... [ 2s] [20/41] preinstalling libsqlite... [ 2s] [21/41] preinstalling libuuid... [ 2s] [22/41] preinstalling libzstd1... [ 2s] [23/41] preinstalling nspr... [ 2s] [24/41] preinstalling sed... [ 2s] [25/41] preinstalling zlib... [ 2s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 10s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 12s] [28/41] preinstalling coreutils... [ 13s] [29/41] preinstalling libacl... [ 13s] [30/41] preinstalling libelf... [ 13s] [31/41] preinstalling libmount... [ 13s] [32/41] preinstalling smack... [ 13s] [33/41] preinstalling bzip2... [ 13s] [34/41] preinstalling libmagic... [ 13s] [35/41] preinstalling libxml2... [ 13s] [36/41] preinstalling tar... [ 13s] [37/41] preinstalling util-linux... [ 13s] [38/41] preinstalling util-linux-su... [ 13s] [39/41] preinstalling nss... [ 13s] [40/41] preinstalling libsoftokn3... [ 13s] [41/41] preinstalling rpm... [ 13s] running qemu-linux-user-x86_64-cross postinstall script [ 14s] running qemu-accel-x86_64-armv7hl postinstall script [ 14s] running setup postinstall script [ 14s] chroot: failed to run command '': No such file or directory [ 14s] initializing rpm db... [ 14s] reordering...cycle: libsoftokn3 -> nss [ 14s] breaking dependency nss -> libsoftokn3 [ 14s] done [ 14s] querying package ids... [ 15s] [1/97] cumulate libmagic-data-5.44-1.7 [ 15s] [2/97] cumulate setup-0.9-1.1 [ 15s] [3/97] cumulate filesystem-3.1-1.1 [ 15s] [4/97] cumulate glibc-2.30-1.8 [ 15s] [5/97] cumulate libatomic-9.2.0-1.9 [ 15s] [6/97] cumulate libgcc-9.2.0-1.9 [ 15s] [7/97] cumulate bash-3.2.57-1.1 [ 15s] [8/97] cumulate cpio-2.8-1.1 [ 15s] [9/97] cumulate diffutils-3.8-1.1 [ 15s] [10/97] cumulate findutils-4.3.8-1.7 [ 15s] [11/97] cumulate gdbm-1.8.3-1.8 [ 15s] [12/97] cumulate hostname-3.23-1.1 [ 15s] [13/97] cumulate libattr-2.5.1-1.7 [ 15s] [14/97] cumulate libblkid-2.37.4-1.4 [ 15s] [15/97] cumulate libbz2-1.0.8-1.7 [ 15s] [16/97] cumulate libcap-2.24-1.7 [ 15s] [17/97] cumulate libext2fs-1.46.0-1.7 [ 15s] [18/97] cumulate libfreebl3-3.87-1.8 [ 15s] [19/97] cumulate libgfortran-9.2.0-1.9 [ 15s] [20/97] cumulate libgomp-9.2.0-1.9 [ 15s] [21/97] cumulate libitm-9.2.0-1.9 [ 15s] [22/97] cumulate libltdl-2.4.7-1.8 [ 15s] [23/97] cumulate liblua-5.1.5-1.7 [ 15s] [24/97] cumulate liblzma-5.4.0-1.8 [ 15s] [25/97] cumulate libopenssl11-1.1.1u-1.8 [ 15s] [26/97] cumulate libpcre-8.45-1.1 [ 15s] [27/97] cumulate libpopt-1.16-1.7 [ 15s] [28/97] cumulate libsmack-1.3.1-1.7 [ 15s] [29/97] cumulate libsmartcols-2.37.4-1.4 [ 15s] [30/97] cumulate libsqlite-3.40.1-1.7 [ 15s] [31/97] cumulate libstdc++-9.2.0-1.9 [ 15s] [32/97] cumulate libuuid-2.37.4-1.4 [ 15s] [33/97] cumulate libzstd1-1.5.2-1.7 [ 15s] [34/97] cumulate m4-1.4.19-1.1 [ 15s] [35/97] cumulate net-tools-2.0_20121208git-1.1 [ 15s] [36/97] cumulate nspr-4.35-1.7 [ 15s] [37/97] cumulate patch-2.7.6-1.7 [ 15s] [38/97] cumulate pkg-config-0.29.2-1.8 [ 15s] [39/97] cumulate sed-4.1c-1.1 [ 15s] [40/97] cumulate update-alternatives-1.21.18-1.1 [ 15s] [41/97] cumulate which-2.17-1.1 [ 15s] [42/97] cumulate zlib-1.2.13-1.8 [ 15s] [43/97] cumulate build-compare-2015.04.28-1.2 [ 15s] [44/97] cumulate libstdc++-devel-9.2.0-1.9 [ 15s] [45/97] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.4 [ 15s] [46/97] cumulate cpp-9.2.0-1.9 [ 15s] [47/97] cumulate gcc-c++-9.2.0-1.9 [ 15s] [48/97] cumulate binutils-2.33.1-1.8 [ 15s] [49/97] cumulate coreutils-6.9-14.2 [ 15s] [50/97] cumulate gawk-3.1.5-1.1 [ 15s] [51/97] cumulate grep-2.5.2-1.1 [ 15s] [52/97] cumulate libacl-2.2.53-1.7 [ 15s] [53/97] cumulate libcc1-9.2.0-1.9 [ 15s] [54/97] cumulate libelf-0.189-1.8 [ 15s] [55/97] cumulate libmount-2.37.4-1.4 [ 15s] [56/97] cumulate libubsan-9.2.0-1.9 [ 15s] [57/97] cumulate make-4.3-1.8 [ 15s] [58/97] cumulate nss-certs-3.87-1.8 [ 15s] [59/97] cumulate smack-1.3.1-1.7 [ 15s] [60/97] cumulate bzip2-1.0.8-1.7 [ 15s] [61/97] cumulate libfdisk-2.37.4-1.4 [ 15s] [62/97] cumulate libmagic-5.44-1.7 [ 15s] [63/97] cumulate libxml2-2.10.2-1.8 [ 15s] [64/97] cumulate perl-5.34.0-1.7 [ 15s] [65/97] cumulate xz-5.4.0-1.8 [ 15s] [66/97] cumulate build-mkbaselibs-20120927-1.1 [ 15s] [67/97] cumulate linux-glibc-devel-3.10-1.8 [ 15s] [68/97] cumulate terminfo-base-full-6.2-1.8 [ 15s] [69/97] cumulate autoconf-2.71-1.8 [ 15s] [70/97] cumulate file-5.44-1.7 [ 15s] [71/97] cumulate glibc-locale-2.30-1.8 [ 15s] [72/97] cumulate perl-DBI-1.628-1.1 [ 15s] [73/97] cumulate tar-1.17-1.1 [ 15s] [74/97] cumulate gzip-1.3.12-1.7 [ 15s] [75/97] cumulate pam-1.1.6-1.1 [ 15s] [76/97] cumulate tzdata-2023c-1.1 [ 15s] [77/97] cumulate libdw-0.189-1.8 [ 15s] [78/97] cumulate libarchive-3.6.2-1.8 [ 15s] [79/97] cumulate gcc-9.2.0-1.9 [ 15s] [80/97] cumulate glibc-devel-2.30-1.8 [ 15s] [81/97] cumulate qemu-accel-x86_64-armv7hl-0.4-2.1 [ 15s] [82/97] cumulate automake-1.16.5-1.8 [ 15s] [83/97] cumulate libasm-0.189-1.8 [ 15s] [84/97] cumulate libncurses6-6.2-1.8 [ 15s] [85/97] cumulate build-20120927-1.1 [ 15s] [86/97] cumulate libncurses-6.2-1.8 [ 15s] [87/97] cumulate less-608-1.1 [ 15s] [88/97] cumulate libreadline-5.2-1.7 [ 15s] [89/97] cumulate procps-ng-3.3.17-1.1 [ 15s] [90/97] cumulate libtool-2.4.7-1.8 [ 15s] [91/97] cumulate elfutils-0.189-1.8 [ 15s] [92/97] cumulate util-linux-2.37.4-1.4 [ 15s] [93/97] cumulate util-linux-su-2.37.4-1.4 [ 15s] [94/97] cumulate nss-3.87-1.8 [ 15s] [95/97] cumulate libsoftokn3-3.87-1.8 [ 15s] [96/97] cumulate rpm-4.14.1.1-1.8 [ 15s] [97/97] cumulate rpm-build-4.14.1.1-1.8 [ 15s] now installing cumulated packages [ 15s] Preparing... ######################################## [ 15s] Updating / installing... [ 15s] setup-0.9-1.1 ######################################## [ 15s] filesystem-3.1-1.1 ######################################## [ 16s] libmagic-data-5.44-1.7 ######################################## [ 16s] glibc-2.30-1.8 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 16s] ######################################## [ 17s] libgcc-9.2.0-1.9 ######################################## [ 17s] bash-3.2.57-1.1 ######################################## [ 17s] zlib-1.2.13-1.8 ######################################## [ 18s] coreutils-6.9-14.2 ######################################## [ 18s] libstdc++-9.2.0-1.9 ######################################## [ 18s] libbz2-1.0.8-1.7 ######################################## [ 18s] liblzma-5.4.0-1.8 ######################################## [ 18s] libelf-0.189-1.8 ######################################## [ 19s] libdw-0.189-1.8 ######################################## [ 19s] libmagic-5.44-1.7 ######################################## [ 19s] libblkid-2.37.4-1.4 ######################################## [ 20s] nspr-4.35-1.7 ######################################## [ 21s] binutils-2.33.1-1.8 ######################################## [ 21s] pam-1.1.6-1.1 ######################################## [ 21s] libcap-2.24-1.7 ######################################## [ 22s] libfreebl3-3.87-1.8 ######################################## [ 22s] liblua-5.1.5-1.7 ######################################## [ 22s] libpopt-1.16-1.7 ######################################## [ 22s] libuuid-2.37.4-1.4 ######################################## [ 22s] libzstd1-1.5.2-1.7 ######################################## [ 23s] linux-glibc-devel-3.10-1.8 ######################################## [ 23s] terminfo-base-full-6.2-1.8 ######################################## [ 23s] libncurses6-6.2-1.8 ######################################## [ 24s] libreadline-5.2-1.7 ######################################## [ 24s] glibc-devel-2.30-1.8 ######################################## [ 24s] libfdisk-2.37.4-1.4 ######################################## [ 24s] nss-certs-3.87-1.8 ######################################## [ 24s] libmount-2.37.4-1.4 ######################################## [ 24s] libasm-0.189-1.8 ######################################## [ 24s] libxml2-2.10.2-1.8 ######################################## [ 25s] xz-5.4.0-1.8 ######################################## [ 25s] bzip2-1.0.8-1.7 ######################################## [ 25s] libcc1-9.2.0-1.9 ######################################## [ 25s] libubsan-9.2.0-1.9 ######################################## [ 25s] gzip-1.3.12-1.7 ######################################## [ 25s] make-4.3-1.8 ######################################## [ 25s] findutils-4.3.8-1.7 ######################################## [ 25s] gdbm-1.8.3-1.8 ######################################## [ 29s] perl-5.34.0-1.7 ######################################## [ 30s] build-mkbaselibs-20120927-1.1 ######################################## [ 30s] libattr-2.5.1-1.7 ######################################## [ 30s] libacl-2.2.53-1.7 ######################################## [ 30s] tar-1.17-1.1 ######################################## [ 30s] libgfortran-9.2.0-1.9 ######################################## [ 31s] libgomp-9.2.0-1.9 ######################################## [ 33s] libitm-9.2.0-1.9 ######################################## [ 36s] libltdl-2.4.7-1.8 ######################################## [ 36s] libopenssl11-1.1.1u-1.8 ######################################## [ 36s] libarchive-3.6.2-1.8 ######################################## [ 37s] libpcre-8.45-1.1 ######################################## [ 37s] libsmack-1.3.1-1.7 ######################################## [ 37s] libsmartcols-2.37.4-1.4 ######################################## [ 38s] libsqlite-3.40.1-1.7 ######################################## [ 38s] libsoftokn3-3.87-1.8 ######################################## [ 38s] nss-3.87-1.8 ######################################## [ 39s] rpm-4.14.1.1-1.8 ######################################## [ 40s] m4-1.4.19-1.1 ######################################## [ 40s] autoconf-2.71-1.8 ######################################## [ 40s] automake-1.16.5-1.8 ######################################## [ 40s] patch-2.7.6-1.7 ######################################## [ 40s] sed-4.1c-1.1 ######################################## [ 41s] util-linux-2.37.4-1.4 ######################################## [ 41s] libatomic-9.2.0-1.9 ######################################## [ 41s] libtool-2.4.7-1.8 ######################################## [ 41s] build-20120927-1.1 ######################################## [ 41s] libncurses-6.2-1.8 ######################################## [ 42s] libstdc++-devel-9.2.0-1.9 ######################################## [ 42s] build-compare-2015.04.28-1.2 ######################################## [ 49s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 51s] gcc-9.2.0-1.9 ######################################## [ 67s] qemu-accel-x86_64-armv7hl-0.4-2.1 ######################################## [ 68s] rpm-build-4.14.1.1-1.8 ######################################## [ 68s] util-linux-su-2.37.4-1.4 ######################################## [ 68s] smack-1.3.1-1.7 ######################################## [ 68s] grep-2.5.2-1.1 ######################################## [ 68s] perl-DBI-1.628-1.1 ######################################## [ 68s] elfutils-0.189-1.8 ######################################## [ 68s] less-608-1.1 ######################################## [ 68s] procps-ng-3.3.17-1.1 ######################################## [ 68s] file-5.44-1.7 ######################################## [ 69s] glibc-locale-2.30-1.8 ######################################## [ 69s] tzdata-2023c-1.1 ######################################## [ 70s] cpp-9.2.0-1.9 ######################################## [ 71s] gcc-c++-9.2.0-1.9 ######################################## [ 71s] gawk-3.1.5-1.1 ######################################## [ 71s] cpio-2.8-1.1 ######################################## [ 71s] diffutils-3.8-1.1 ######################################## [ 71s] hostname-3.23-1.1 ######################################## [ 71s] libext2fs-1.46.0-1.7 ######################################## [ 72s] net-tools-2.0_20121208git-1.1 ######################################## [ 72s] pkg-config-0.29.2-1.8 ######################################## [ 72s] update-alternatives-1.21.18-1.1 ######################################## [ 72s] which-2.17-1.1 ######################################## [ 72s] now finalizing build dir... [ 73s] ----------------------------------------------------------------- [ 73s] I have the following modifications for perl-DBD-SQLite.spec: [ 73s] 22c22 [ 73s] < Release: 0 [ 73s] --- [ 73s] > Release: 1.1 [ 73s] build target is armv7hl-tizen-linux [ 73s] ----------------------------------------------------------------- [ 73s] ----- building perl-DBD-SQLite.spec (user abuild) [ 73s] ----------------------------------------------------------------- [ 73s] ----------------------------------------------------------------- [ 74s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-8.0-Base/standard/f1a95b026c252b75effb9b95c43acab5-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec [ 76s] Building target platforms: armv7hl-tizen-linux [ 76s] Building for target armv7hl-tizen-linux [ 76s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Q7f37i [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + rm -rf DBD-SQLite-1.50 [ 76s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz [ 76s] + /bin/tar -xof - [ 76s] + STATUS=0 [ 76s] + '[' 0 -ne 0 ']' [ 76s] + cd DBD-SQLite-1.50 [ 76s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 76s] + find . -type f '!' -name '*.pl' -print0 [ 76s] + xargs -0 chmod 644 [ 76s] + exit 0 [ 76s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.cYBJqj [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd DBD-SQLite-1.50 [ 77s] ++ uname -m [ 77s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 77s] + LANG=C [ 77s] + export LANG [ 77s] + unset DISPLAY [ 77s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 77s] + export CFLAGS [ 77s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 77s] + export CXXFLAGS [ 77s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 77s] + export FFLAGS [ 77s] + LDFLAGS= [ 77s] + export LDFLAGS [ 77s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 78s] Checking if your kit is complete... [ 78s] Looks good [ 79s] Using DBI 1.628 (for perl 5.034000 on armv7l-linux-thread-multi) installed in /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBI/ [ 79s] Generating a Unix-style Makefile [ 79s] Writing Makefile for DBD::SQLite [ 79s] Writing MYMETA.yml and MYMETA.json [ 79s] + /bin/make -j12 [ 79s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi [ 79s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c [ 79s] Running Mkbootstrap for SQLite () [ 79s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c [ 79s] "/usr/bin/perl" "/usr/lib/perl5/5.34.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.34.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap' SQLite.xs > SQLite.xsc [ 79s] chmod 644 "SQLite.bs" [ 79s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 79s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm [ 79s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm [ 79s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm [ 79s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod [ 79s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod [ 79s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm [ 79s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm [ 80s] dbdimp.c: In function 'sqlite_db_do_sv': [ 80s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable] [ 80s] 485 | int i; [ 80s] | ^ [ 80s] dbdimp.c: In function 'sqlite_db_disconnect': [ 80s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 80s] 636 | while ( s = imp_dbh->stmt_list ) { [ 80s] | ^ [ 80s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses] [ 80s] 651 | while( s = imp_dbh->stmt_list ) { [ 80s] | ^ [ 80s] dbdimp.c: In function 'sqlite_st_prepare_sv': [ 80s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress] [ 80s] 865 | if (&extra && imp_dbh->allow_multiple_statements) { [ 80s] | ^ [ 80s] In file included from /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/perl.h:5685, [ 80s] from SQLiteXS.h:11, [ 80s] from dbdimp.c:6: [ 80s] dbdimp.c: In function 'sqlite_db_func_dispatcher': [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1635:9: note: in expansion of macro 'POPs' [ 80s] 1635 | POPs; [ 80s] | ^~~~ [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1643:13: note: in expansion of macro 'POPs' [ 80s] 1643 | POPs; [ 80s] | ^~~~ [ 80s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher': [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1820:9: note: in expansion of macro 'POPs' [ 80s] 1820 | POPs; [ 80s] | ^~~~ [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1828:13: note: in expansion of macro 'POPs' [ 80s] 1828 | POPs; [ 80s] | ^~~~ [ 80s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher': [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1885:7: note: in expansion of macro 'POPs' [ 80s] 1885 | POPs; [ 80s] | ^~~~ [ 80s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher': [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1926:13: note: in expansion of macro 'POPs' [ 80s] 1926 | POPs; [ 80s] | ^~~~ [ 80s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/pp.h:162:16: warning: value computed is not used [-Wunused-value] [ 80s] 162 | #define POPs (*sp--) [ 80s] | ~^~~~~~ [ 80s] dbdimp.c:1933:17: note: in expansion of macro 'POPs' [ 80s] 1933 | POPs; [ 80s] | ^~~~ [ 80s] dbdimp.c: In function 'sqlite_db_trace_dispatcher': [ 80s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 80s] 2413 | int retval = 0; [ 80s] | ^~~~~~ [ 80s] dbdimp.c: In function 'sqlite_db_profile_dispatcher': [ 80s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable] [ 80s] 2471 | int retval = 0; [ 80s] | ^~~~~~ [ 80s] dbdimp.c: In function 'perl_tokenizer_Next': [ 80s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable] [ 80s] 2803 | STRLEN n_a; /* this is required for older perls < 5.8.8 */ [ 80s] | ^~~ [ 80s] dbdimp.c: In function 'sqlite_db_destroy_module_data': [ 80s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable] [ 80s] 3664 | int rc = SQLITE_ERROR; [ 80s] | ^~ [ 80s] In file included from SQLiteXS.h:17, [ 80s] from dbdimp.c:6: [ 80s] At top level: [ 80s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 80s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 80s] | ^~~~~~~~~~~~ [ 80s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 80s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 80s] | ^~~~~~~~~~~ [ 80s] dbdimp.c: In function 'perl_vt_Eof': [ 80s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 80s] 3378 | return eof; [ 80s] | ^~~ [ 81s] mv SQLite.xsc SQLite.c [ 81s] cc -c -I. -I/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE" -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c [ 81s] SQLite.xs: In function 'XS_DBD__SQLite__db__do': [ 81s] SQLite.xs:24:18: warning: implicit declaration of function 'sqlite_db_do_sv'; did you mean 'sqlite_st_rows'? [-Wimplicit-function-declaration] [ 81s] 24 | retval = sqlite_db_do_sv(dbh, imp_dbh, statement); [ 81s] | ^~~~~~~~~~~~~~~ [ 81s] | sqlite_st_rows [ 81s] In file included from SQLiteXS.h:12, [ 81s] from SQLite.xs:3: [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_profile': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable] [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:197:20: note: in definition of macro 'dXSI32' [ 81s] 197 | #define dXSI32 I32 ix = XSANY.any_i32 [ 81s] | ^~ [ 81s] SQLite.c: In function 'XS_DBD__SQLite_compile_options': [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable] [ 81s] 189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ [ 81s] | ^~~~ [ 81s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/XSUB.h:189:28: note: in definition of macro 'dXSTARG' [ 81s] 189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \ [ 81s] | ^~~~ [ 81s] SQLite.c:825:6: warning: unused variable 'RETVAL' [-Wunused-variable] [ 81s] 825 | int RETVAL; [ 81s] | ^~~~~~ [ 81s] SQLite.xs: In function 'boot_DBD__SQLite': [ 81s] SQLite.xs:12:5: warning: implicit declaration of function 'init_cxt' [-Wimplicit-function-declaration] [ 81s] 12 | init_cxt(); [ 81s] | ^~~~~~~~ [ 81s] In file included from SQLiteXS.h:17, [ 81s] from SQLite.xs:3: [ 81s] At top level: [ 81s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function] [ 81s] 149 | newUTF8SVpvn(char *s, STRLEN len) { [ 81s] | ^~~~~~~~~~~~ [ 81s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function] [ 81s] 139 | newUTF8SVpv(char *s, STRLEN len) { [ 81s] | ^~~~~~~~~~~ [ 109s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so [ 109s] cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic SQLite.o dbdimp.o sqlite3.o -o blib/arch/auto/DBD/SQLite/SQLite.so \ [ 109s] \ [ 109s] [ 109s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so [ 111s] Manifying 7 pod documents [ 111s] + exit 0 [ 111s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.tUGQ4h [ 111s] + umask 022 [ 111s] + cd /home/abuild/rpmbuild/BUILD [ 111s] + cd DBD-SQLite-1.50 [ 111s] + LANG=C [ 111s] + export LANG [ 111s] + unset DISPLAY [ 111s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm [ 111s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm [ 111s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm install_vendor [ 112s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 112s] Manifying 7 pod documents [ 113s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite.pm [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::Fulltext_search.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::Constants.3 [ 113s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man/man3/DBD::SQLite::Cookbook.3 [ 113s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 113s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 113s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 113s] + xargs -0 -r rm [ 113s] + '[' armv7hl == noarch ']' [ 113s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 113s] + FILES=perl-DBD-SQLite.files [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f [ 113s] + RES= [ 113s] + '[' -n '' ']' [ 113s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ [ 113s] ++ sort [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] + continue [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/DBD [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/DBD/SQLite [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto/DBD [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto/DBD/SQLite [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto/share [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto/share/dist [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for dir in '`find ${base_dir} -type d | sort`' [ 113s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 113s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 113s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 113s] + el=armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 113s] + all_dir=(${all_dir[@]} $el) [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 113s] + RES= [ 113s] + '[' -n '' ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 113s] + /bin/cat [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/DBD = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD -maxdepth 1 -type f [ 113s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite.pm [ 113s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite.pm ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite.pm [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite.pm [ 113s] + /bin/cat [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/DBD/SQLite = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f [ 113s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' [ 113s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable.pm [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Constants.pm [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Cookbook.pod [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/Fulltext_search.pod [ 113s] + /bin/cat [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f [ 113s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' [ 113s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 113s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 113s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm [ 113s] + /bin/cat [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + continue [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/auto/DBD = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD -maxdepth 1 -type f [ 113s] + RES= [ 113s] + '[' -n '' ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD [ 113s] + /bin/cat [ 113s] + for i in '${all_dir[@]}' [ 113s] + '[' armv7l-linux-thread-multi/auto/DBD/SQLite = auto ']' [ 113s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 113s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD/SQLite ']' [ 113s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f [ 113s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 113s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']' [ 113s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite [ 113s] + /bin/cat [ 113s] + for file in '$RES' [ 113s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 114s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 114s] + /bin/cat [ 114s] + for i in '${all_dir[@]}' [ 114s] + '[' armv7l-linux-thread-multi/auto/share = auto ']' [ 114s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 114s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share ']' [ 114s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share -maxdepth 1 -type f [ 114s] + RES= [ 114s] + '[' -n '' ']' [ 114s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share [ 114s] + /bin/cat [ 114s] + for i in '${all_dir[@]}' [ 114s] + '[' armv7l-linux-thread-multi/auto/share/dist = auto ']' [ 114s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 114s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist ']' [ 114s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist -maxdepth 1 -type f [ 114s] + RES= [ 114s] + '[' -n '' ']' [ 114s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist [ 114s] + /bin/cat [ 114s] + for i in '${all_dir[@]}' [ 114s] + '[' armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']' [ 114s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 114s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite ']' [ 114s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f [ 114s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 114s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 114s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' [ 114s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 114s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 114s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']' [ 114s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite [ 114s] + /bin/cat [ 114s] + for file in '$RES' [ 114s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 114s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c [ 114s] + /bin/cat [ 114s] + for file in '$RES' [ 114s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 114s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h [ 114s] + /bin/cat [ 114s] + for file in '$RES' [ 114s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 114s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h [ 114s] + /bin/cat [ 114s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/man ']' [ 114s] + fgen_file '/usr/share/man/man?/*' [ 114s] + /bin/cat [ 114s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/var/adm/perl-modules/perl-DBD-SQLite ']' [ 114s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/bin ']' [ 114s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-1.1 --unique-debug-src-base perl-DBD-SQLite-1.50-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50 [ 114s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/DBD/SQLite/SQLite.so [ 114s] 14559 blocks [ 114s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest [ 114s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest [ 114s] + /usr/lib/rpm/check-buildroot [ 114s] + /usr/lib/rpm//brp-compress [ 114s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 115s] + /usr/lib/rpm/brp-python-hardlink [ 115s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm [ 115s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list [ 115s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 115s] ~/rpmbuild/BUILD/DBD-SQLite-1.50 [ 115s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.hOzkeg [ 115s] + umask 022 [ 115s] + cd /home/abuild/rpmbuild/BUILD [ 115s] + cd DBD-SQLite-1.50 [ 115s] + /bin/make test [ 115s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644 [ 116s] PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/**/*.t [ 117s] # $DBI::VERSION=1.628 [ 117s] # Compile Options: [ 117s] # ENABLE_COLUMN_METADATA [ 117s] # ENABLE_FTS3 [ 117s] # ENABLE_FTS3_PARENTHESIS [ 117s] # ENABLE_FTS4 [ 117s] # ENABLE_JSON1 [ 117s] # ENABLE_RTREE [ 117s] # ENABLE_STAT4 [ 117s] # SYSTEM_MALLOC [ 117s] # THREADSAFE=1 [ 117s] t/01_compile.t ........................................ ok [ 117s] # sqlite_version=3.10.2 [ 117s] t/02_logon.t .......................................... ok [ 118s] t/03_create_table.t ................................... ok [ 118s] t/04_insert.t ......................................... ok [ 119s] t/05_select.t ......................................... ok [ 119s] t/06_tran.t ........................................... ok [ 120s] t/07_error.t .......................................... ok [ 127s] t/08_busy.t ........................................... ok [ 127s] t/09_create_function.t ................................ ok [ 128s] t/10_create_aggregate.t ............................... ok [ 129s] t/12_unicode.t ........................................ ok [ 130s] t/13_create_collation.t ............................... ok [ 131s] t/14_progress_handler.t ............................... ok [ 133s] t/15_ak_dbd.t ......................................... ok [ 133s] t/16_column_info.t .................................... ok [ 134s] t/17_createdrop.t ..................................... ok [ 135s] t/18_insertfetch.t .................................... ok [ 137s] t/19_bindparam.t ...................................... ok [ 137s] t/20_blobs.t .......................................... ok [ 138s] t/21_blobtext.t ....................................... ok [ 139s] t/22_listfields.t ..................................... ok [ 139s] t/23_nulls.t .......................................... ok [ 140s] t/24_numrows.t ........................................ ok [ 140s] t/25_chopblanks.t ..................................... ok [ 141s] t/26_commit.t ......................................... ok [ 143s] t/27_metadata.t ....................................... ok [ 146s] t/28_schemachange.t ................................... ok [ 147s] t/30_auto_rollback.t .................................. ok [ 147s] t/31_bind_weird_number_param.t ........................ ok [ 148s] t/32_inactive_error.t ................................. ok [ 149s] t/33_non_latin_path.t ................................. ok [ 150s] t/34_online_backup.t .................................. ok [ 151s] t/35_table_info.t ..................................... ok [ 151s] t/36_hooks.t .......................................... ok [ 152s] t/37_regexp.t ......................................... ok [ 152s] t/38_empty_statement.t ................................ ok [ 153s] t/39_foreign_keys.t ................................... ok [ 153s] t/40_multiple_statements.t ............................ ok [ 154s] t/41_placeholders.t ................................... ok [ 155s] t/42_primary_key_info.t ............................... ok [ 155s] t/43_fts3.t ........................................... ok [ 156s] t/44_rtree.t .......................................... ok [ 156s] t/45_savepoints.t ..................................... ok [ 157s] t/46_mod_perl.t ....................................... skipped: requires APR::Table [ 158s] t/47_execute.t ........................................ ok [ 159s] t/48_bind_param_is_sticky.t ........................... ok [ 159s] t/49_trace_and_profile.t .............................. ok [ 160s] t/50_foreign_key_info.t ............................... ok [ 161s] t/51_table_column_metadata.t .......................... ok [ 161s] t/52_db_filename.t .................................... ok [ 162s] t/53_status.t ......................................... ok [ 162s] t/54_literal_txn.t .................................... ok [ 163s] t/55_statistics_info.t ................................ ok [ 163s] t/56_open_flags.t ..................................... ok [ 164s] t/57_uri_filename.t ................................... ok [ 165s] t/58_see_if_its_a_number_and_explicit_binding.t ....... ok [ 165s] t/59_extended_result_codes.t .......................... skipped: this test is for Win32 only [ 166s] t/60_readonly.t ....................................... ok [ 166s] t/61_strlike.t ........................................ ok [ 167s] t/cookbook_variance.t ................................. ok [ 167s] t/rt_106151_outermost_savepoint.t ..................... ok [ 168s] t/rt_106950_extra_warnings_with_savepoints.t .......... ok [ 168s] t/rt_15186_prepcached.t ............................... ok [ 169s] t/rt_21406_auto_finish.t .............................. ok [ 169s] t/rt_25371_asymmetric_unicode.t ....................... ok [ 170s] t/rt_25460_numeric_aggregate.t ........................ ok [ 170s] t/rt_25924_user_defined_func_unicode.t ................ ok [ 171s] t/rt_26775_distinct.t ................................. ok [ 171s] t/rt_27553_prepared_cache_and_analyze.t ............... ok [ 172s] t/rt_29058_group_by.t ................................. ok [ 172s] t/rt_29629_sqlite_where_length.t ...................... ok [ 173s] t/rt_31324_full_names.t ............................... ok [ 174s] t/rt_32889_prepare_cached_reexecute.t ................. ok [ 174s] t/rt_36836_duplicate_key.t ............................ ok [ 175s] t/rt_36838_unique_and_bus_error.t ..................... ok [ 176s] t/rt_40594_nullable.t ................................. ok [ 176s] t/rt_48393_debug_panic_with_commit.t .................. skipped: set $ENV{TEST_DBD_SQLITE_WITH_DEBUGGER} to enable this test [ 177s] t/rt_50503_fts3.t ..................................... ok [ 178s] t/rt_52573_manual_exclusive_lock.t .................... ok [ 178s] t/rt_53235_icu_compatibility.t ........................ skipped: requires SQLite ICU plugin to be enabled [ 179s] t/rt_62370_diconnected_handles_operation.t ............ ok [ 179s] t/rt_64177_ping_wipes_out_the_errstr.t ................ ok [ 180s] t/rt_67581_bind_params_mismatch.t ..................... ok [ 180s] t/rt_71311_bind_col_and_unicode.t ..................... ok [ 181s] t/rt_73159_fts_tokenizer_segfault.t ................... ok [ 182s] t/rt_73787_exponential_buffer_overflow.t .............. ok [ 183s] t/rt_76395_int_overflow.t ............................. ok [ 183s] t/rt_77724_primary_key_with_a_whitespace.t ............ ok [ 184s] t/rt_78833_utf8_flag_for_column_names.t ............... ok [ 185s] t/rt_81536_multi_column_primary_key_info.t ............ ok [ 186s] t/rt_88228_sqlite_3_8_0_crash.t ....................... ok [ 186s] t/rt_96050_db_filename_for_a_closed_database.t ........ ok [ 187s] t/rt_96877_unicode_statements.t ....................... ok [ 188s] t/rt_96878_fts_contentless_table.t .................... ok [ 189s] t/rt_97598_crash_on_disconnect_with_virtual_tables.t .. ok [ 189s] t/virtual_table/00_base.t ............................. ok [ 190s] t/virtual_table/01_destroy.t .......................... ok [ 191s] t/virtual_table/02_find_function.t .................... ok [ 191s] t/virtual_table/10_filecontent.t ...................... ok [ 193s] t/virtual_table/11_filecontent_fulltext.t ............. ok [ 194s] t/virtual_table/20_perldata.t ......................... ok [ 195s] t/virtual_table/21_perldata_charinfo.t ................ ok [ 196s] t/virtual_table/rt_99748.t ............................ ok [ 196s] All tests successful. [ 196s] Files=103, Tests=3561, 80 wallclock secs ( 1.78 usr 0.10 sys + 57.91 cusr 1.63 csys = 61.42 CPU) [ 196s] Result: PASS [ 196s] + exit 0 [ 196s] Processing files: perl-DBD-SQLite-1.50-1.1.armv7hl [ 196s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.JZHhag [ 196s] + umask 022 [ 196s] + cd /home/abuild/rpmbuild/BUILD [ 196s] + cd DBD-SQLite-1.50 [ 196s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + export LC_ALL=C [ 196s] + LC_ALL=C [ 196s] + export DOCDIR [ 196s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm/usr/share/doc/packages/perl-DBD-SQLite [ 196s] + exit 0 [ 197s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-1.1 perl-DBD-SQLite(armv7hl-32) = 1.50-1.1 [ 197s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 197s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 197s] Processing files: perl-DBD-SQLite-debugsource-1.50-1.1.armv7hl [ 197s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 197s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 197s] [ 197s] Provides: perl-DBD-SQLite-debugsource = 1.50-1.1 perl-DBD-SQLite-debugsource(armv7hl-32) = 1.50-1.1 [ 197s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 197s] Processing files: perl-DBD-SQLite-debuginfo-1.50-1.1.armv7hl [ 197s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 197s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 197s] [ 197s] Provides: perl-DBD-SQLite-debuginfo = 1.50-1.1 perl-DBD-SQLite-debuginfo(armv7hl-32) = 1.50-1.1 [ 197s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 197s] Recommends: perl-DBD-SQLite-debugsource(armv7hl-32) = 1.50-1.1 [ 197s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm [ 197s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.1.src.rpm [ 201s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-1.50-1.1.armv7hl.rpm [ 204s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-debugsource-1.50-1.1.armv7hl.rpm [ 205s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-DBD-SQLite-debuginfo-1.50-1.1.armv7hl.rpm [ 205s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.p1oEtf [ 205s] + umask 022 [ 205s] + cd /home/abuild/rpmbuild/BUILD [ 205s] + cd DBD-SQLite-1.50 [ 205s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.arm [ 205s] + exit 0 [ 205s] ... checking for files with abuild user/group [ 205s] ... creating baselibs [ 206s] [ 206s] 3fdf47d30e82 finished "build perl-DBD-SQLite.spec" at Thu Sep 14 17:40:21 UTC 2023. [ 206s] Retried build at Thu Sep 14 20:00:40 2023 returned same result, skipped Retried build at Thu Oct 12 06:38:09 2023 returned same result, skipped Retried build at Sat Oct 14 10:01:29 2023 returned same result, skipped Retried build at Mon Oct 30 08:02:23 2023 returned same result, skipped Retried build at Wed Dec 13 03:11:05 2023 returned same result, skipped Retried build at Fri Mar 29 03:16:51 2024 returned same result, skipped Retried build at Tue May 14 12:04:12 2024 returned same result, skipped Retried build at Wed May 29 13:22:47 2024 returned same result, skipped Retried build at Thu Nov 21 08:08:37 2024 returned same result, skipped Retried build at Tue Nov 26 05:03:42 2024 returned same result, skipped