[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] fcf2fd42ff31 started "build perl-PerlIO-gzip.spec" at Wed May 29 13:13:55 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-8.0-Base' repository 'standard' arch 'armv7hl' srcmd5 'ead501ba05dede29b7795f33a0cd0639' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/6/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.6/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 4s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/41] preinstalling libmagic-data... [ 4s] [2/41] preinstalling libncurses... [ 4s] [3/41] preinstalling setup... [ 4s] [4/41] preinstalling filesystem... [ 4s] [5/41] preinstalling glibc... [ 4s] [6/41] preinstalling libgcc... [ 4s] [7/41] preinstalling bash... [ 5s] [8/41] preinstalling diffutils... [ 5s] [9/41] preinstalling grep... [ 5s] [10/41] preinstalling libattr... [ 5s] [11/41] preinstalling libblkid... [ 5s] [12/41] preinstalling libbz2... [ 5s] [13/41] preinstalling libcap... [ 5s] [14/41] preinstalling libfreebl3... [ 5s] [15/41] preinstalling liblua... [ 5s] [16/41] preinstalling liblzma... [ 5s] [17/41] preinstalling libpopt... [ 5s] [18/41] preinstalling libreadline... [ 5s] [19/41] preinstalling libsmack... [ 5s] [20/41] preinstalling libsqlite... [ 5s] [21/41] preinstalling libuuid... [ 5s] [22/41] preinstalling libzstd1... [ 5s] [23/41] preinstalling nspr... [ 5s] [24/41] preinstalling sed... [ 5s] [25/41] preinstalling zlib... [ 5s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 14s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 17s] [28/41] preinstalling coreutils... [ 17s] [29/41] preinstalling libacl... [ 17s] [30/41] preinstalling libelf... [ 17s] [31/41] preinstalling libmount... [ 17s] [32/41] preinstalling smack... [ 17s] [33/41] preinstalling bzip2... [ 17s] [34/41] preinstalling libmagic... [ 17s] [35/41] preinstalling libxml2... [ 17s] [36/41] preinstalling tar... [ 17s] [37/41] preinstalling util-linux... [ 18s] [38/41] preinstalling util-linux-su... [ 18s] [39/41] preinstalling nss... [ 18s] [40/41] preinstalling libsoftokn3... [ 18s] [41/41] preinstalling rpm... [ 18s] running qemu-linux-user-x86_64-cross postinstall script [ 19s] running qemu-accel-x86_64-armv7hl postinstall script [ 19s] running setup postinstall script [ 19s] chroot: failed to run command '': No such file or directory [ 19s] initializing rpm db... [ 19s] reordering...cycle: libsoftokn3 -> nss [ 19s] breaking dependency nss -> libsoftokn3 [ 19s] done [ 19s] querying package ids... [ 20s] [1/95] cumulate libmagic-data-5.44-1.17 [ 20s] [2/95] cumulate setup-0.9-1.7 [ 20s] [3/95] cumulate filesystem-3.1-1.1 [ 20s] [4/95] cumulate glibc-2.30-1.21 [ 20s] [5/95] cumulate libatomic-9.2.0-1.21 [ 20s] [6/95] cumulate libgcc-9.2.0-1.21 [ 20s] [7/95] cumulate bash-3.2.57-2.1 [ 20s] [8/95] cumulate cpio-2.8-1.1 [ 20s] [9/95] cumulate diffutils-3.8-1.1 [ 20s] [10/95] cumulate findutils-4.3.8-2.4 [ 20s] [11/95] cumulate gdbm-1.8.3-2.5 [ 20s] [12/95] cumulate hostname-3.23-1.1 [ 20s] [13/95] cumulate libattr-2.5.1-2.4 [ 20s] [14/95] cumulate libblkid-2.37.4-3.4 [ 20s] [15/95] cumulate libbz2-1.0.8-1.16 [ 20s] [16/95] cumulate libcap-2.24-1.17 [ 20s] [17/95] cumulate libfreebl3-3.98-1.5 [ 20s] [18/95] cumulate libgfortran-9.2.0-1.21 [ 20s] [19/95] cumulate libgomp-9.2.0-1.21 [ 20s] [20/95] cumulate libitm-9.2.0-1.21 [ 20s] [21/95] cumulate libltdl-2.4.7-2.5 [ 20s] [22/95] cumulate liblua-5.1.5-1.16 [ 20s] [23/95] cumulate liblzma-5.4.0-1.20 [ 20s] [24/95] cumulate libopenssl11-1.1.1u-1.20 [ 20s] [25/95] cumulate libpcre-8.45-2.1 [ 20s] [26/95] cumulate libpopt-1.16-1.17 [ 20s] [27/95] cumulate libsmack-1.3.1-1.17 [ 20s] [28/95] cumulate libsmartcols-2.37.4-3.4 [ 20s] [29/95] cumulate libsqlite-3.40.1-1.17 [ 20s] [30/95] cumulate libstdc++-9.2.0-1.21 [ 20s] [31/95] cumulate libuuid-2.37.4-3.4 [ 20s] [32/95] cumulate libzstd1-1.5.2-2.4 [ 20s] [33/95] cumulate m4-1.4.19-1.1 [ 20s] [34/95] cumulate net-tools-2.0_20121208git-1.5 [ 20s] [35/95] cumulate nspr-4.35-1.16 [ 20s] [36/95] cumulate patch-2.7.6-1.17 [ 20s] [37/95] cumulate pkg-config-0.29.2-2.5 [ 20s] [38/95] cumulate sed-4.1c-2.1 [ 20s] [39/95] cumulate update-alternatives-1.21.18-2.1 [ 20s] [40/95] cumulate which-2.17-1.1 [ 20s] [41/95] cumulate zlib-1.3-1.3 [ 20s] [42/95] cumulate build-compare-2015.04.28-1.11 [ 20s] [43/95] cumulate libstdc++-devel-9.2.0-1.21 [ 20s] [44/95] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.4 [ 20s] [45/95] cumulate cpp-9.2.0-1.21 [ 20s] [46/95] cumulate gcc-c++-9.2.0-1.21 [ 20s] [47/95] cumulate binutils-2.33.1-1.20 [ 20s] [48/95] cumulate coreutils-6.9-15.1 [ 20s] [49/95] cumulate gawk-3.1.5-2.1 [ 20s] [50/95] cumulate grep-2.5.2-2.1 [ 20s] [51/95] cumulate libacl-2.2.53-1.16 [ 20s] [52/95] cumulate libcc1-9.2.0-1.21 [ 20s] [53/95] cumulate libelf-0.189-1.20 [ 20s] [54/95] cumulate libmount-2.37.4-3.4 [ 20s] [55/95] cumulate libubsan-9.2.0-1.21 [ 20s] [56/95] cumulate make-4.3-1.17 [ 20s] [57/95] cumulate nss-certs-3.98-1.5 [ 20s] [58/95] cumulate smack-1.3.1-1.17 [ 20s] [59/95] cumulate bzip2-1.0.8-1.16 [ 20s] [60/95] cumulate libfdisk-2.37.4-3.4 [ 20s] [61/95] cumulate libmagic-5.44-1.17 [ 20s] [62/95] cumulate libxml2-2.10.2-1.17 [ 20s] [63/95] cumulate perl-5.34.0-1.17 [ 20s] [64/95] cumulate xz-5.4.0-1.20 [ 20s] [65/95] cumulate build-mkbaselibs-20120927-1.1 [ 20s] [66/95] cumulate linux-glibc-devel-3.10-2.4 [ 20s] [67/95] cumulate terminfo-base-full-6.4-2.5 [ 20s] [68/95] cumulate autoconf-2.71-1.19 [ 20s] [69/95] cumulate file-5.44-1.17 [ 20s] [70/95] cumulate glibc-locale-2.30-1.21 [ 20s] [71/95] cumulate tar-1.17-2.1 [ 20s] [72/95] cumulate gzip-1.3.12-2.4 [ 20s] [73/95] cumulate pam-1.1.6-2.4 [ 20s] [74/95] cumulate tzdata-2023c-1.1 [ 20s] [75/95] cumulate libdw-0.189-1.20 [ 20s] [76/95] cumulate libarchive-3.6.2-2.8 [ 20s] [77/95] cumulate gcc-9.2.0-1.21 [ 20s] [78/95] cumulate glibc-devel-2.30-1.21 [ 20s] [79/95] cumulate qemu-accel-x86_64-armv7hl-0.4-1.14 [ 20s] [80/95] cumulate automake-1.16.5-1.19 [ 20s] [81/95] cumulate libasm-0.189-1.20 [ 20s] [82/95] cumulate libncurses6-6.4-2.5 [ 20s] [83/95] cumulate build-20120927-1.1 [ 20s] [84/95] cumulate libncurses-6.4-2.5 [ 20s] [85/95] cumulate less-608-1.1 [ 20s] [86/95] cumulate libreadline-5.2-2.4 [ 20s] [87/95] cumulate zlib-devel-1.3-1.3 [ 20s] [88/95] cumulate libtool-2.4.7-2.5 [ 20s] [89/95] cumulate elfutils-0.189-1.20 [ 20s] [90/95] cumulate util-linux-2.37.4-3.4 [ 20s] [91/95] cumulate util-linux-su-2.37.4-3.4 [ 20s] [92/95] cumulate nss-3.98-1.5 [ 20s] [93/95] cumulate libsoftokn3-3.98-1.5 [ 20s] [94/95] cumulate rpm-4.14.1.1-1.19 [ 20s] [95/95] cumulate rpm-build-4.14.1.1-1.19 [ 20s] now installing cumulated packages [ 21s] Preparing... ######################################## [ 21s] Updating / installing... [ 21s] setup-0.9-1.7 ######################################## [ 21s] filesystem-3.1-1.1 ######################################## [ 21s] libmagic-data-5.44-1.17 ######################################## [ 21s] glibc-2.30-1.21 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 21s] ######################################## [ 22s] libgcc-9.2.0-1.21 ######################################## [ 22s] bash-3.2.57-2.1 ######################################## [ 22s] zlib-1.3-1.3 ######################################## [ 22s] coreutils-6.9-15.1 ######################################## [ 22s] libstdc++-9.2.0-1.21 ######################################## [ 23s] libbz2-1.0.8-1.16 ######################################## [ 23s] liblzma-5.4.0-1.20 ######################################## [ 23s] libelf-0.189-1.20 ######################################## [ 23s] libdw-0.189-1.20 ######################################## [ 24s] libmagic-5.44-1.17 ######################################## [ 24s] libblkid-2.37.4-3.4 ######################################## [ 24s] nspr-4.35-1.16 ######################################## [ 25s] binutils-2.33.1-1.20 ######################################## [ 25s] pam-1.1.6-2.4 ######################################## [ 26s] libcap-2.24-1.17 ######################################## [ 26s] libfreebl3-3.98-1.5 ######################################## [ 26s] liblua-5.1.5-1.16 ######################################## [ 27s] libpopt-1.16-1.17 ######################################## [ 27s] libuuid-2.37.4-3.4 ######################################## [ 27s] libzstd1-1.5.2-2.4 ######################################## [ 28s] linux-glibc-devel-3.10-2.4 ######################################## [ 29s] terminfo-base-full-6.4-2.5 ######################################## [ 29s] libncurses6-6.4-2.5 ######################################## [ 30s] glibc-devel-2.30-1.21 ######################################## [ 30s] libreadline-5.2-2.4 ######################################## [ 30s] libfdisk-2.37.4-3.4 ######################################## [ 31s] nss-certs-3.98-1.5 ######################################## [ 31s] libmount-2.37.4-3.4 ######################################## [ 31s] libasm-0.189-1.20 ######################################## [ 31s] libxml2-2.10.2-1.17 ######################################## [ 31s] xz-5.4.0-1.20 ######################################## [ 31s] bzip2-1.0.8-1.16 ######################################## [ 31s] libcc1-9.2.0-1.21 ######################################## [ 32s] libubsan-9.2.0-1.21 ######################################## [ 32s] gzip-1.3.12-2.4 ######################################## [ 32s] make-4.3-1.17 ######################################## [ 33s] findutils-4.3.8-2.4 ######################################## [ 33s] gdbm-1.8.3-2.5 ######################################## [ 37s] perl-5.34.0-1.17 ######################################## [ 37s] build-mkbaselibs-20120927-1.1 ######################################## [ 37s] libattr-2.5.1-2.4 ######################################## [ 37s] libacl-2.2.53-1.16 ######################################## [ 37s] tar-1.17-2.1 ######################################## [ 37s] libgfortran-9.2.0-1.21 ######################################## [ 37s] libgomp-9.2.0-1.21 ######################################## [ 38s] libitm-9.2.0-1.21 ######################################## [ 38s] libltdl-2.4.7-2.5 ######################################## [ 38s] libopenssl11-1.1.1u-1.20 ######################################## [ 38s] libarchive-3.6.2-2.8 ######################################## [ 39s] libpcre-8.45-2.1 ######################################## [ 39s] libsmack-1.3.1-1.17 ######################################## [ 39s] libsmartcols-2.37.4-3.4 ######################################## [ 39s] libsqlite-3.40.1-1.17 ######################################## [ 40s] libsoftokn3-3.98-1.5 ######################################## [ 40s] nss-3.98-1.5 ######################################## [ 41s] rpm-4.14.1.1-1.19 ######################################## [ 41s] m4-1.4.19-1.1 ######################################## [ 41s] autoconf-2.71-1.19 ######################################## [ 42s] automake-1.16.5-1.19 ######################################## [ 42s] patch-2.7.6-1.17 ######################################## [ 42s] pkg-config-0.29.2-2.5 ######################################## [ 42s] sed-4.1c-2.1 ######################################## [ 43s] util-linux-2.37.4-3.4 ######################################## [ 43s] libatomic-9.2.0-1.21 ######################################## [ 43s] zlib-devel-1.3-1.3 ######################################## [ 43s] libtool-2.4.7-2.5 ######################################## [ 43s] build-20120927-1.1 ######################################## [ 43s] libncurses-6.4-2.5 ######################################## [ 44s] libstdc++-devel-9.2.0-1.21 ######################################## [ 44s] build-compare-2015.04.28-1.11 ######################################## [ 52s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 55s] gcc-9.2.0-1.21 ######################################## [ 71s] qemu-accel-x86_64-armv7hl-0.4-1.14 ######################################## [ 72s] rpm-build-4.14.1.1-1.19 ######################################## [ 72s] util-linux-su-2.37.4-3.4 ######################################## [ 72s] smack-1.3.1-1.17 ######################################## [ 72s] grep-2.5.2-2.1 ######################################## [ 72s] elfutils-0.189-1.20 ######################################## [ 72s] less-608-1.1 ######################################## [ 72s] file-5.44-1.17 ######################################## [ 73s] glibc-locale-2.30-1.21 ######################################## [ 73s] tzdata-2023c-1.1 ######################################## [ 75s] cpp-9.2.0-1.21 ######################################## [ 76s] gcc-c++-9.2.0-1.21 ######################################## [ 76s] gawk-3.1.5-2.1 ######################################## [ 76s] cpio-2.8-1.1 ######################################## [ 76s] diffutils-3.8-1.1 ######################################## [ 76s] hostname-3.23-1.1 ######################################## [ 76s] net-tools-2.0_20121208git-1.5 ######################################## [ 76s] update-alternatives-1.21.18-2.1 ######################################## [ 76s] which-2.17-1.1 ######################################## [ 77s] now finalizing build dir... [ 79s] ----------------------------------------------------------------- [ 79s] I have the following modifications for perl-PerlIO-gzip.spec: [ 79s] 4c4 [ 79s] < Release: 1 [ 79s] --- [ 79s] > Release: 1.2 [ 80s] build target is armv7hl-tizen-linux [ 80s] ----------------------------------------------------------------- [ 80s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 80s] ----------------------------------------------------------------- [ 80s] ----------------------------------------------------------------- [ 81s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-8.0-Base/standard/ead501ba05dede29b7795f33a0cd0639-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 86s] Building target platforms: armv7hl-tizen-linux [ 86s] Building for target armv7hl-tizen-linux [ 86s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.JfVWoQ [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + rm -rf perl-PerlIO-gzip-0.18 [ 86s] + /bin/tar -xof - [ 86s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.18.tar.gz [ 86s] + STATUS=0 [ 86s] + '[' 0 -ne 0 ']' [ 86s] + cd perl-PerlIO-gzip-0.18 [ 86s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 86s] + echo 'Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch):' [ 86s] Patch #0 (0001-Bump-to-perl-PerlIO-gzip-0.18.patch): [ 86s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 86s] patching file Makefile.PL [ 86s] + exit 0 [ 86s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.p238PM [ 86s] + umask 022 [ 86s] + cd /home/abuild/rpmbuild/BUILD [ 86s] + cd perl-PerlIO-gzip-0.18 [ 86s] ++ uname -m [ 86s] + [[ armv7l == \a\a\r\c\h\6\4 ]] [ 86s] + LANG=C [ 86s] + export LANG [ 86s] + unset DISPLAY [ 86s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 86s] + export CFLAGS [ 86s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 86s] + export CXXFLAGS [ 86s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 86s] + export FFLAGS [ 86s] + LDFLAGS= [ 86s] + export LDFLAGS [ 86s] + perl Makefile.PL [ 88s] Checking if your kit is complete... [ 88s] Looks good [ 89s] Generating a Unix-style Makefile [ 89s] Writing Makefile for PerlIO::gzip [ 89s] Writing MYMETA.yml and MYMETA.json [ 89s] + make [ 93s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 93s] Running Mkbootstrap for gzip () [ 94s] chmod 644 "gzip.bs" [ 94s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 94s] "/usr/bin/perl" "/usr/lib/perl5/5.34.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.34.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 96s] mv gzip.xsc gzip.c [ 96s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.18\" -DXS_VERSION=\"0.18\" -fPIC "-I/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE" gzip.c [ 96s] gzip.xs: In function 'PerlIOGzip_popped': [ 96s] gzip.xs:870:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'IV' {aka 'long int'} [-Wformat=] [ 96s] 870 | PerlIO_debug("PerlIOGzip_popped code=%d\n", code); [ 96s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~ [ 96s] | | [ 96s] | IV {aka long int} [ 96s] In file included from /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/perl.h:5744, [ 96s] from gzip.xs:13: [ 96s] gzip.xs: In function 'PerlIOGzip_getarg': [ 96s] /usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/CORE/embed.h:384:23: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 96s] 384 | #define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 96s] | ^~~~~~~~~~~~ [ 96s] gzip.xs:675:24: note: 'mode' was declared here [ 96s] 675 | register const char *mode; [ 96s] | ^~~~ [ 96s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 96s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 96s] -lz \ [ 96s] [ 97s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 98s] Manifying 1 pod document [ 98s] + exit 0 [ 98s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.PjhzBO [ 98s] + umask 022 [ 98s] + cd /home/abuild/rpmbuild/BUILD [ 98s] + cd perl-PerlIO-gzip-0.18 [ 98s] + LANG=C [ 98s] + export LANG [ 98s] + unset DISPLAY [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 98s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 98s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 98s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm install_vendor [ 98s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 99s] Manifying 1 pod document [ 100s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 100s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 100s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 100s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/man/man3/PerlIO::gzip.3 [ 100s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/info [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/doc/packages [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/doc/perl-PerlIO-gzip [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/doc/perl-PerlIO-gzip-0.18 [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/gtk-doc [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/doc [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/man [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm -regex '.*/man/man./.*.[0-9]' [ 101s] + xargs rm -f -- [ 101s] + xargs rm -f -- [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm -regex '.*/man/../man./.*.[0-9]' [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm -regex '.*/man/man./.*.[0-9]pm' [ 101s] + xargs rm -f -- [ 101s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 101s] + xargs -0 -r rm [ 101s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 101s] + '[' armv7hl == noarch ']' [ 101s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/5.34.0/armv7l-linux-thread-multi/perllocal.pod [ 101s] + FILES=perl-PerlIO-gzip.files [ 101s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0 -maxdepth 1 -type f [ 101s] + RES= [ 101s] + '[' -n '' ']' [ 101s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ [ 101s] ++ sort [ 101s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ -type d [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] + continue [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 102s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 102s] + el=armv7l-linux-thread-multi [ 102s] + all_dir=(${all_dir[@]} $el) [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO [ 102s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 102s] + el=armv7l-linux-thread-multi/PerlIO [ 102s] + all_dir=(${all_dir[@]} $el) [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto [ 102s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 102s] + el=armv7l-linux-thread-multi/auto [ 102s] + all_dir=(${all_dir[@]} $el) [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO [ 102s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 102s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 102s] + all_dir=(${all_dir[@]} $el) [ 102s] + for dir in '`find ${base_dir} -type d | sort`' [ 102s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ ']' [ 102s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 102s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/ '{print $2}' [ 102s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 102s] + all_dir=(${all_dir[@]} $el) [ 102s] + for i in '${all_dir[@]}' [ 102s] + '[' armv7l-linux-thread-multi = auto ']' [ 102s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi ']' [ 102s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 102s] + RES= [ 102s] + '[' -n '' ']' [ 102s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi [ 102s] + /bin/cat [ 102s] + for i in '${all_dir[@]}' [ 102s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 102s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO ']' [ 102s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 102s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 102s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 102s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO [ 102s] + /bin/cat [ 102s] + for file in '$RES' [ 102s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 102s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 102s] + /bin/cat [ 102s] + for i in '${all_dir[@]}' [ 102s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 102s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 102s] + continue [ 102s] + for i in '${all_dir[@]}' [ 102s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 102s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 102s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 102s] + RES= [ 102s] + '[' -n '' ']' [ 102s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO [ 102s] + /bin/cat [ 102s] + for i in '${all_dir[@]}' [ 102s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 102s] + '[' /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto ']' [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 102s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 102s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 102s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 102s] + fgen_dir /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 102s] + /bin/cat [ 102s] + for file in '$RES' [ 102s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 102s] + fgen_file /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 102s] + /bin/cat [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/share/man ']' [ 102s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 102s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/bin ']' [ 102s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.18-1.2 --unique-debug-src-base perl-PerlIO-gzip-0.18-1.2.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 103s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm/usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 103s] 158 blocks [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debuginfo.manifest [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/perl-PerlIO-gzip-debugsource.manifest [ 104s] + /usr/lib/rpm/check-buildroot [ 105s] + /usr/lib/rpm//brp-compress [ 105s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 105s] + /usr/lib/rpm/brp-python-hardlink [ 105s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 105s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.18/isu.list [ 105s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 105s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.18 [ 105s] Processing files: perl-PerlIO-gzip-0.18-1.2.armv7hl [ 105s] Provides: perl(PerlIO::gzip) = 0.18 perl-PerlIO-gzip = 0.18-1.2 perl-PerlIO-gzip(armv7hl-32) = 0.18-1.2 [ 105s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 105s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 105s] Processing files: perl-PerlIO-gzip-debugsource-0.18-1.2.armv7hl [ 106s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 106s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 106s] [ 106s] Provides: perl-PerlIO-gzip-debugsource = 0.18-1.2 perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.18-1.2 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Processing files: perl-PerlIO-gzip-debuginfo-0.18-1.2.armv7hl [ 106s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 106s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 106s] [ 106s] Provides: perl-PerlIO-gzip-debuginfo = 0.18-1.2 perl-PerlIO-gzip-debuginfo(armv7hl-32) = 0.18-1.2 [ 106s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 106s] Recommends: perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.18-1.2 [ 106s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 106s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.2.src.rpm [ 106s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.18-1.2.armv7hl.rpm [ 107s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.18-1.2.armv7hl.rpm [ 107s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.18-1.2.armv7hl.rpm [ 107s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.jx6cuP [ 107s] + umask 022 [ 107s] + cd /home/abuild/rpmbuild/BUILD [ 107s] + cd perl-PerlIO-gzip-0.18 [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 107s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.18-1.2.arm [ 107s] + exit 0 [ 107s] ... checking for files with abuild user/group [ 108s] ... creating baselibs [ 109s] ... comparing built packages with the former built [ 109s] /usr/lib/build/pkg-diff.sh [ 109s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.18-1.2.src.rpm [ 110s] This is not a prerelease project. Compare the project name. [ 110s] comparing rpmtags [ 110s] comparing RELEASE [ 110s] comparing PROVIDES [ 110s] comparing scripts [ 111s] comparing filelist [ 111s] comparing file checksum [ 111s] RPM meta information is identical [ 111s] compare /.build.oldpackages/perl-PerlIO-gzip-0.18-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.18-1.2.armv7hl.rpm [ 112s] Comparing perl-PerlIO-gzip-0.18-1.1.armv7hl.rpm to perl-PerlIO-gzip-0.18-1.2.armv7hl.rpm [ 112s] This is not a prerelease project. Compare the project name. [ 112s] comparing rpmtags [ 112s] comparing RELEASE [ 112s] comparing PROVIDES [ 112s] comparing scripts [ 113s] comparing filelist [ 113s] comparing file checksum [ 113s] creating rename script [ 113s] RPM file checksum differs. [ 113s] Extracting packages [ 115s] /usr/lib/perl5/vendor_perl/5.34.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so differs in ELF section .rodata [ 115s] --- /tmp/tmp.AeaH529013/tmp.BRUb531171 2024-05-29 22:15:50.152159389 +0900 [ 115s] +++ /tmp/tmp.AeaH529013/tmp.FiZk531239 2024-05-29 22:15:50.176159389 +0900 [ 115s] @@ -3,8 +3,8 @@ [ 115s] [ 115s] Contents of section .rodata: [ 115s] 2044 5065726c 494f477a 69705f70 6f707065 PerlIOGzip_poppe [ 115s] - 2054 6420636f 64653d25 640a0000 312e322e d code=%d...1.2. [ 115s] - 2064 31330000 5065726c 494f3a3a 677a6970 13..PerlIO::gzip [ 115s] + 2054 6420636f 64653d25 640a0000 312e332e d code=%d...1.3. [ 115s] + 2064 30000000 5065726c 494f3a3a 677a6970 0...PerlIO::gzip [ 115s] 2074 2063616e 27742079 65742063 6c6f6e65 can't yet clone [ 115s] 2084 20616374 69766520 6c617965 72730000 active layers.. [ 115s] 2094 72000000 5065726c 494f477a 69702063 r...PerlIOGzip c [ 116s] compare /.build.oldpackages/perl-PerlIO-gzip-debuginfo-0.18-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.18-1.2.armv7hl.rpm [ 116s] skipping -debuginfo package [ 116s] compare /.build.oldpackages/perl-PerlIO-gzip-debugsource-0.18-1.1.armv7hl.rpm /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.18-1.2.armv7hl.rpm [ 116s] Comparing perl-PerlIO-gzip-debugsource-0.18-1.1.armv7hl.rpm to perl-PerlIO-gzip-debugsource-0.18-1.2.armv7hl.rpm [ 117s] This is not a prerelease project. Compare the project name. [ 117s] comparing rpmtags [ 117s] comparing RELEASE [ 117s] comparing PROVIDES [ 117s] comparing scripts [ 117s] comparing filelist [ 117s] comparing file checksum [ 118s] creating rename script [ 118s] RPM meta information is identical [ 118s] [ 118s] fcf2fd42ff31 finished "build perl-PerlIO-gzip.spec" at Wed May 29 13:15:53 UTC 2024. [ 118s] Retried build at Thu Nov 21 07:52:34 2024 returned same result, skipped Retried build at Tue Nov 26 04:50:02 2024 returned same result, skipped