[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 1s] [ 1s] 7ecdb9b085e4 started "build perl-PerlIO-gzip.spec" at Fri Oct 25 07:52:57 UTC 2024. [ 1s] [ 1s] Building perl-PerlIO-gzip for project 'Tizen-9.0-Base' repository 'standard' arch 'aarch64' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-PerlIO-gzip.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-PerlIO-gzip.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/13/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.13/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 3s] registering binfmt handlers for cross build [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] [1/41] preinstalling libmagic-data... [ 4s] [2/41] preinstalling libncurses... [ 4s] [3/41] preinstalling setup... [ 4s] [4/41] preinstalling filesystem... [ 4s] [5/41] preinstalling glibc... [ 5s] [6/41] preinstalling bash... [ 5s] [7/41] preinstalling diffutils... [ 5s] [8/41] preinstalling grep... [ 5s] [9/41] preinstalling libattr... [ 5s] [10/41] preinstalling libblkid... [ 5s] [11/41] preinstalling libbz2... [ 5s] [12/41] preinstalling libfreebl3... [ 5s] [13/41] preinstalling libgcc... [ 6s] [14/41] preinstalling liblua... [ 6s] [15/41] preinstalling liblzma... [ 6s] [16/41] preinstalling libpopt... [ 6s] [17/41] preinstalling libreadline... [ 6s] [18/41] preinstalling libsmack... [ 6s] [19/41] preinstalling libsqlite... [ 6s] [20/41] preinstalling libuuid... [ 6s] [21/41] preinstalling libzstd1... [ 7s] [22/41] preinstalling nspr... [ 7s] [23/41] preinstalling sed... [ 7s] [24/41] preinstalling zlib... [ 7s] [25/41] preinstalling qemu-accel-x86_64-aarch64... [ 20s] [26/41] preinstalling qemu-linux-user-x86_64-cross... [ 24s] [27/41] preinstalling coreutils... [ 24s] [28/41] preinstalling libacl... [ 24s] [29/41] preinstalling libcap... [ 25s] [30/41] preinstalling libelf... [ 25s] [31/41] preinstalling libmount... [ 25s] [32/41] preinstalling smack... [ 25s] [33/41] preinstalling bzip2... [ 25s] [34/41] preinstalling libmagic... [ 25s] [35/41] preinstalling libxml2... [ 25s] [36/41] preinstalling tar... [ 25s] [37/41] preinstalling util-linux... [ 25s] [38/41] preinstalling util-linux-su... [ 25s] [39/41] preinstalling nss... [ 25s] [40/41] preinstalling libsoftokn3... [ 25s] [41/41] preinstalling rpm... [ 26s] running qemu-linux-user-x86_64-cross postinstall script [ 26s] running qemu-accel-x86_64-aarch64 postinstall script [ 26s] running setup postinstall script [ 26s] chroot: failed to run command '': No such file or directory [ 26s] initializing rpm db... [ 27s] reordering...cycle: libsoftokn3 -> nss [ 27s] breaking dependency nss -> libsoftokn3 [ 27s] done [ 27s] querying package ids... [ 27s] [1/96] cumulate libmagic-data-5.45-1.3 [ 27s] [2/96] cumulate setup-0.9-1.35 [ 27s] [3/96] cumulate filesystem-3.1-1.1 [ 27s] [4/96] cumulate glibc-2.30-1.6 [ 27s] [5/96] cumulate bash-3.2.57-1.1 [ 27s] [6/96] cumulate cpio-2.8-1.1 [ 27s] [7/96] cumulate diffutils-3.10-1.1 [ 27s] [8/96] cumulate findutils-4.3.8-1.4 [ 27s] [9/96] cumulate gdbm-1.8.3-1.6 [ 27s] [10/96] cumulate hostname-3.23-1.1 [ 27s] [11/96] cumulate libatomic-9.2.0-1.6 [ 27s] [12/96] cumulate libattr-2.5.1-1.4 [ 27s] [13/96] cumulate libblkid-2.39.3-1.3 [ 27s] [14/96] cumulate libbz2-1.0.8-1.4 [ 27s] [15/96] cumulate libfreebl3-3.98-1.5 [ 27s] [16/96] cumulate libgcc-9.2.0-1.6 [ 27s] [17/96] cumulate libgomp-9.2.0-1.6 [ 27s] [18/96] cumulate libitm-9.2.0-1.6 [ 27s] [19/96] cumulate libltdl-2.4.7-1.6 [ 27s] [20/96] cumulate liblua-5.1.5-1.4 [ 27s] [21/96] cumulate liblzma-5.4.5-1.6 [ 27s] [22/96] cumulate libopenssl3-3.0.13-1.6 [ 27s] [23/96] cumulate libpcre-8.45-1.4 [ 27s] [24/96] cumulate libpopt-1.16-1.3 [ 27s] [25/96] cumulate libsmack-1.3.1-1.3 [ 27s] [26/96] cumulate libsmartcols-2.39.3-1.3 [ 27s] [27/96] cumulate libsqlite-3.44.0-1.4 [ 27s] [28/96] cumulate libuuid-2.39.3-1.3 [ 27s] [29/96] cumulate libzstd1-1.5.5-1.5 [ 27s] [30/96] cumulate m4-1.4.19-1.1 [ 27s] [31/96] cumulate net-tools-2.0_20121208git-1.3 [ 27s] [32/96] cumulate nspr-4.35-1.4 [ 27s] [33/96] cumulate patch-2.7.6-1.3 [ 27s] [34/96] cumulate pkg-config-0.29.2-1.4 [ 27s] [35/96] cumulate sed-4.1c-1.4 [ 27s] [36/96] cumulate update-alternatives-1.22.2-3.1 [ 27s] [37/96] cumulate which-2.17-2.1 [ 27s] [38/96] cumulate zlib-1.3-1.5 [ 27s] [39/96] cumulate build-compare-2023.06.18-1.1 [ 27s] [40/96] cumulate hal-rootstrap-checker-0.1.0-5.1 [ 27s] [41/96] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.1 [ 27s] [42/96] cumulate coreutils-6.9-14.1 [ 27s] [43/96] cumulate cpp-9.2.0-1.6 [ 27s] [44/96] cumulate gawk-3.1.5-1.1 [ 27s] [45/96] cumulate gcc-c++-9.2.0-1.6 [ 27s] [46/96] cumulate grep-2.5.2-1.3 [ 27s] [47/96] cumulate libacl-2.3.2-1.4 [ 27s] [48/96] cumulate libcap-2.69-1.5 [ 27s] [49/96] cumulate libelf-0.189-1.6 [ 27s] [50/96] cumulate libgfortran-9.2.0-1.6 [ 27s] [51/96] cumulate libmount-2.39.3-1.3 [ 27s] [52/96] cumulate libstdc++-9.2.0-1.6 [ 27s] [53/96] cumulate make-4.3-1.4 [ 27s] [54/96] cumulate nss-certs-3.98-1.5 [ 27s] [55/96] cumulate smack-1.3.1-1.3 [ 27s] [56/96] cumulate bzip2-1.0.8-1.4 [ 27s] [57/96] cumulate libfdisk-2.39.3-1.3 [ 27s] [58/96] cumulate libmagic-5.45-1.3 [ 27s] [59/96] cumulate libxml2-2.12.5-1.5 [ 27s] [60/96] cumulate perl-5.38.0-1.4 [ 27s] [61/96] cumulate xz-5.4.5-1.6 [ 27s] [62/96] cumulate build-mkbaselibs-20120927-1.1 [ 27s] [63/96] cumulate libstdc++-devel-9.2.0-1.6 [ 27s] [64/96] cumulate file-5.45-1.3 [ 27s] [65/96] cumulate linux-glibc-devel-5.4-1.5 [ 27s] [66/96] cumulate tar-1.17-3.1 [ 27s] [67/96] cumulate terminfo-base-full-6.4-1.6 [ 27s] [68/96] cumulate autoconf-2.71-1.6 [ 27s] [69/96] cumulate binutils-2.33.1-1.6 [ 27s] [70/96] cumulate glibc-locale-2.30-1.6 [ 27s] [71/96] cumulate gzip-1.3.12-1.3 [ 27s] [72/96] cumulate libcc1-9.2.0-1.6 [ 27s] [73/96] cumulate libubsan-9.2.0-1.6 [ 27s] [74/96] cumulate pam-1.1.6-1.3 [ 27s] [75/96] cumulate tzdata-2023c-1.1 [ 27s] [76/96] cumulate libdw-0.189-1.6 [ 27s] [77/96] cumulate libarchive-3.7.2-1.5 [ 27s] [78/96] cumulate glibc-devel-2.30-1.6 [ 27s] [79/96] cumulate automake-1.16.5-1.5 [ 27s] [80/96] cumulate libasm-0.189-1.6 [ 27s] [81/96] cumulate libncurses6-6.4-1.6 [ 27s] [82/96] cumulate build-20120927-1.1 [ 27s] [83/96] cumulate gcc-9.2.0-1.6 [ 27s] [84/96] cumulate libncurses-6.4-1.6 [ 27s] [85/96] cumulate less-643-2.1 [ 27s] [86/96] cumulate libreadline-5.2-1.5 [ 27s] [87/96] cumulate qemu-accel-x86_64-aarch64-0.4-1.1 [ 27s] [88/96] cumulate zlib-devel-1.3-1.5 [ 27s] [89/96] cumulate libtool-2.4.7-1.6 [ 27s] [90/96] cumulate elfutils-0.189-1.6 [ 27s] [91/96] cumulate util-linux-2.39.3-1.3 [ 27s] [92/96] cumulate util-linux-su-2.39.3-1.3 [ 27s] [93/96] cumulate nss-3.98-1.5 [ 27s] [94/96] cumulate libsoftokn3-3.98-1.5 [ 27s] [95/96] cumulate rpm-4.14.1.1-1.6 [ 27s] [96/96] cumulate rpm-build-4.14.1.1-1.6 [ 27s] now installing cumulated packages [ 28s] Preparing... ######################################## [ 28s] Updating / installing... [ 28s] setup-0.9-1.35 ######################################## [ 28s] filesystem-3.1-1.1 ######################################## [ 28s] glibc-2.30-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 29s] ######################################## [ 29s] bash-3.2.57-1.1 ######################################## [ 29s] zlib-1.3-1.5 ######################################## [ 29s] libgcc-9.2.0-1.6 ######################################## [ 30s] libstdc++-9.2.0-1.6 ######################################## [ 30s] coreutils-6.9-14.1 ######################################## [ 30s] libbz2-1.0.8-1.4 ######################################## [ 31s] liblzma-5.4.5-1.6 ######################################## [ 31s] libelf-0.189-1.6 ######################################## [ 31s] libdw-0.189-1.6 ######################################## [ 32s] libblkid-2.39.3-1.3 ######################################## [ 32s] nspr-4.35-1.4 ######################################## [ 33s] pam-1.1.6-1.3 ######################################## [ 34s] binutils-2.33.1-1.6 ######################################## [ 34s] libcap-2.69-1.5 ######################################## [ 34s] libfreebl3-3.98-1.5 ######################################## [ 34s] liblua-5.1.5-1.4 ######################################## [ 35s] libpopt-1.16-1.3 ######################################## [ 35s] libuuid-2.39.3-1.3 ######################################## [ 35s] libzstd1-1.5.5-1.5 ######################################## [ 36s] libfdisk-2.39.3-1.3 ######################################## [ 36s] nss-certs-3.98-1.5 ######################################## [ 36s] libmount-2.39.3-1.3 ######################################## [ 36s] libasm-0.189-1.6 ######################################## [ 36s] libxml2-2.12.5-1.5 ######################################## [ 37s] xz-5.4.5-1.6 ######################################## [ 37s] bzip2-1.0.8-1.4 ######################################## [ 37s] linux-glibc-devel-5.4-1.5 ######################################## [ 38s] glibc-devel-2.30-1.6 ######################################## [ 38s] terminfo-base-full-6.4-1.6 ######################################## [ 38s] libncurses6-6.4-1.6 ######################################## [ 38s] libreadline-5.2-1.5 ######################################## [ 38s] gzip-1.3.12-1.3 ######################################## [ 38s] libcc1-9.2.0-1.6 ######################################## [ 39s] libubsan-9.2.0-1.6 ######################################## [ 39s] libgfortran-9.2.0-1.6 ######################################## [ 39s] make-4.3-1.4 ######################################## [ 39s] findutils-4.3.8-1.4 ######################################## [ 39s] gdbm-1.8.3-1.6 ######################################## [ 44s] perl-5.38.0-1.4 ######################################## [ 45s] build-mkbaselibs-20120927-1.1 ######################################## [ 45s] libatomic-9.2.0-1.6 ######################################## [ 45s] libattr-2.5.1-1.4 ######################################## [ 45s] libacl-2.3.2-1.4 ######################################## [ 46s] tar-1.17-3.1 ######################################## [ 46s] libgomp-9.2.0-1.6 ######################################## [ 46s] libitm-9.2.0-1.6 ######################################## [ 48s] gcc-9.2.0-1.6 ######################################## [ 48s] libltdl-2.4.7-1.6 ######################################## [ 48s] libopenssl3-3.0.13-1.6 ######################################## [ 48s] libarchive-3.7.2-1.5 ######################################## [ 49s] libpcre-8.45-1.4 ######################################## [ 49s] libsmack-1.3.1-1.3 ######################################## [ 49s] libsmartcols-2.39.3-1.3 ######################################## [ 50s] libsqlite-3.44.0-1.4 ######################################## [ 50s] libsoftokn3-3.98-1.5 ######################################## [ 51s] nss-3.98-1.5 ######################################## [ 51s] m4-1.4.19-1.1 ######################################## [ 51s] autoconf-2.71-1.6 ######################################## [ 52s] automake-1.16.5-1.5 ######################################## [ 52s] patch-2.7.6-1.3 ######################################## [ 52s] pkg-config-0.29.2-1.4 ######################################## [ 52s] sed-4.1c-1.4 ######################################## [ 53s] util-linux-2.39.3-1.3 ######################################## [ 54s] libmagic-data-5.45-1.3 ######################################## [ 54s] libmagic-5.45-1.3 ######################################## [ 55s] rpm-4.14.1.1-1.6 ######################################## [ 55s] rpm-build-4.14.1.1-1.6 ######################################## [ 55s] file-5.45-1.3 ######################################## [ 55s] util-linux-su-2.39.3-1.3 ######################################## [ 55s] zlib-devel-1.3-1.5 ######################################## [ 55s] libtool-2.4.7-1.6 ######################################## [ 55s] smack-1.3.1-1.3 ######################################## [ 55s] grep-2.5.2-1.3 ######################################## [ 70s] qemu-accel-x86_64-aarch64-0.4-1.1 ######################################## [ 71s] build-20120927-1.1 ######################################## [ 71s] libncurses-6.4-1.6 ######################################## [ 71s] less-643-2.1 ######################################## [ 71s] elfutils-0.189-1.6 ######################################## [ 71s] glibc-locale-2.30-1.6 ######################################## [ 72s] tzdata-2023c-1.1 ######################################## [ 72s] libstdc++-devel-9.2.0-1.6 ######################################## [ 74s] cpp-9.2.0-1.6 ######################################## [ 75s] gcc-c++-9.2.0-1.6 ######################################## [ 75s] build-compare-2023.06.18-1.1 ######################################## [ 75s] hal-rootstrap-checker-0.1.0-5.1 ######################################## [ 81s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 82s] gawk-3.1.5-1.1 ######################################## [ 82s] cpio-2.8-1.1 ######################################## [ 83s] diffutils-3.10-1.1 ######################################## [ 83s] hostname-3.23-1.1 ######################################## [ 83s] net-tools-2.0_20121208git-1.3 ######################################## [ 83s] update-alternatives-1.22.2-3.1 ######################################## [ 83s] which-2.17-2.1 ######################################## [ 85s] now finalizing build dir... [ 86s] ----------------------------------------------------------------- [ 86s] I have the following modifications for perl-PerlIO-gzip.spec: [ 86s] 4c4 [ 86s] < Release: 1 [ 86s] --- [ 86s] > Release: 1.1 [ 87s] build target is aarch64-tizen-linux [ 87s] ----------------------------------------------------------------- [ 87s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 87s] ----------------------------------------------------------------- [ 87s] ----------------------------------------------------------------- [ 87s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-9.0-Base/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 91s] Building target platforms: aarch64-tizen-linux [ 91s] Building for target aarch64-tizen-linux [ 91s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.q1B5IV [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + rm -rf perl-PerlIO-gzip-0.20 [ 91s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 91s] + /bin/tar -xof - [ 91s] + STATUS=0 [ 91s] + '[' 0 -ne 0 ']' [ 91s] + cd perl-PerlIO-gzip-0.20 [ 91s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 91s] + exit 0 [ 91s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.27iPXT [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd perl-PerlIO-gzip-0.20 [ 91s] + ref=/usr/lib/rpm [ 91s] + mints=0 [ 91s] + case $(uname -m) in [ 91s] ++ uname -m [ 91s] + mints=20120610 [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.guess [ 91s] + for s in guess sub [ 91s] ++ find -maxdepth 8 -name config.sub [ 91s] + LANG=C [ 91s] + export LANG [ 91s] + unset DISPLAY [ 91s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CFLAGS [ 91s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 91s] + export CXXFLAGS [ 91s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 91s] + export FFLAGS [ 91s] + LDFLAGS= [ 91s] + export LDFLAGS [ 91s] + perl Makefile.PL [ 92s] Checking if your kit is complete... [ 92s] Looks good [ 93s] Generating a Unix-style Makefile [ 93s] Writing Makefile for PerlIO::gzip [ 93s] Writing MYMETA.yml and MYMETA.json [ 93s] + make [ 97s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 97s] Running Mkbootstrap for gzip () [ 98s] chmod 644 "gzip.bs" [ 98s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 98s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 99s] mv gzip.xsc gzip.c [ 99s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE" gzip.c [ 99s] In file included from gzip.xs:13: [ 99s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:1059: warning: "PERL_USE_SAFE_PUTENV" redefined [ 99s] 1059 | #define PERL_USE_SAFE_PUTENV [ 99s] | [ 99s] : note: this is the location of the previous definition [ 99s] In file included from /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/perl.h:6227, [ 99s] from gzip.xs:13: [ 99s] gzip.xs: In function 'PerlIOGzip_getarg': [ 99s] /usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 99s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 99s] | ^~~~~~~~~~~~ [ 99s] gzip.xs:675:24: note: 'mode' was declared here [ 99s] 675 | register const char *mode; [ 99s] | ^~~~ [ 100s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 100s] LD_RUN_PATH="/lib/../lib64" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 100s] -lz \ [ 100s] [ 100s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 101s] Manifying 1 pod document [ 101s] + exit 0 [ 101s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.TSZXaT [ 101s] + umask 022 [ 101s] + cd /home/abuild/rpmbuild/BUILD [ 101s] + cd perl-PerlIO-gzip-0.20 [ 101s] + LANG=C [ 101s] + export LANG [ 101s] + unset DISPLAY [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 101s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 101s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 101s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 install_vendor [ 101s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 102s] Manifying 1 pod document [ 103s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 103s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 103s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO/gzip.pm [ 103s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man/man3/PerlIO::gzip.3 [ 103s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/info [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/packages [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/perl-PerlIO-gzip [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc/perl-PerlIO-gzip-0.20 [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/gtk-doc [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/doc [ 103s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/man./.*.[0-9]' [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/../man./.*.[0-9]' [ 103s] + xargs rm -f -- [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -regex '.*/man/man./.*.[0-9]pm' [ 103s] + xargs rm -f -- [ 103s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 103s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto -name .packlist -print0 [ 103s] + xargs -0 -r rm [ 103s] + '[' aarch64 == noarch ']' [ 103s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/5.38.0/aarch64-linux-thread-multi/perllocal.pod [ 103s] + FILES=perl-PerlIO-gzip.files [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 103s] + RES= [ 103s] + '[' -n '' ']' [ 103s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d [ 103s] ++ sort [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] + continue [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 103s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 103s] + el=aarch64-linux-thread-multi [ 103s] + all_dir=(${all_dir[@]} $el) [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO [ 103s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 103s] + el=aarch64-linux-thread-multi/PerlIO [ 103s] + all_dir=(${all_dir[@]} $el) [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto [ 103s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 103s] + el=aarch64-linux-thread-multi/auto [ 103s] + all_dir=(${all_dir[@]} $el) [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO [ 103s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 103s] + el=aarch64-linux-thread-multi/auto/PerlIO [ 103s] + all_dir=(${all_dir[@]} $el) [ 103s] + for dir in '`find ${base_dir} -type d | sort`' [ 103s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 103s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip [ 103s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 103s] + el=aarch64-linux-thread-multi/auto/PerlIO/gzip [ 103s] + all_dir=(${all_dir[@]} $el) [ 103s] + for i in '${all_dir[@]}' [ 103s] + '[' aarch64-linux-thread-multi = auto ']' [ 103s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi ']' [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi -maxdepth 1 -type f [ 103s] + RES= [ 103s] + '[' -n '' ']' [ 103s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi [ 103s] + /bin/cat [ 103s] + for i in '${all_dir[@]}' [ 103s] + '[' aarch64-linux-thread-multi/PerlIO = auto ']' [ 103s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO ']' [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 103s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm [ 103s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm ']' [ 103s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO [ 103s] + /bin/cat [ 103s] + for file in '$RES' [ 103s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/PerlIO/gzip.pm [ 103s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/PerlIO/gzip.pm [ 103s] + /bin/cat [ 103s] + for i in '${all_dir[@]}' [ 103s] + '[' aarch64-linux-thread-multi/auto = auto ']' [ 103s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 103s] + continue [ 103s] + for i in '${all_dir[@]}' [ 103s] + '[' aarch64-linux-thread-multi/auto/PerlIO = auto ']' [ 103s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO ']' [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 103s] + RES= [ 103s] + '[' -n '' ']' [ 103s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO [ 103s] + /bin/cat [ 103s] + for i in '${all_dir[@]}' [ 103s] + '[' aarch64-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 103s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip = /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto ']' [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip ']' [ 103s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 103s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 103s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 103s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip [ 103s] + /bin/cat [ 103s] + for file in '$RES' [ 103s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0//aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 103s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 103s] + /bin/cat [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/share/man ']' [ 103s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 103s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/bin ']' [ 103s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 104s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64/usr/lib64/perl5/vendor_perl/5.38.0/aarch64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 104s] 158 blocks [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 104s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 104s] + /usr/lib/rpm/check-buildroot [ 104s] + /usr/lib/rpm//brp-compress [ 104s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 104s] + /usr/lib/rpm/brp-python-hardlink [ 104s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 104s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 104s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 104s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 104s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 109s] Processing files: perl-PerlIO-gzip-0.20-1.1.aarch64 [ 109s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(aarch-64) = 0.20-1.1 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Requires: ld-linux-aarch64.so.1()(64bit) ld-linux-aarch64.so.1(GLIBC_2.17)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.17)(64bit) libz.so.1()(64bit) [ 109s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.aarch64 [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(aarch-64) = 0.20-1.1 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.aarch64 [ 109s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 109s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 109s] [ 109s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(aarch-64) = 0.20-1.1 [ 109s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 109s] Recommends: perl-PerlIO-gzip-debugsource(aarch-64) = 0.20-1.1 [ 109s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 109s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-0.20-1.1.aarch64.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-debugsource-0.20-1.1.aarch64.rpm [ 110s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/perl-PerlIO-gzip-debuginfo-0.20-1.1.aarch64.rpm [ 110s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.Q4ZvsT [ 110s] + umask 022 [ 110s] + cd /home/abuild/rpmbuild/BUILD [ 110s] + cd perl-PerlIO-gzip-0.20 [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 110s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.aarch64 [ 110s] + exit 0 [ 110s] ... checking for files with abuild user/group [ 110s] ... creating baselibs [ 110s] [ 110s] 7ecdb9b085e4 finished "build perl-PerlIO-gzip.spec" at Fri Oct 25 07:54:46 UTC 2024. [ 110s] Retried build at Tue Nov 26 13:30:17 2024 returned same result, skipped