[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 7ecdb9b085e4 started "build python3-nose.spec" at Fri Oct 25 07:56:24 UTC 2024. [ 0s] [ 0s] Building python3-nose for project 'Tizen-9.0-Base' repository 'standard' arch 'aarch64' srcmd5 '21fabebcca7f55a09c8b45ef1a2586c3' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/python3-nose.spec build ... [ 2s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 3s] [6/41] preinstalling bash... [ 3s] [7/41] preinstalling diffutils... [ 3s] [8/41] preinstalling grep... [ 3s] [9/41] preinstalling libattr... [ 3s] [10/41] preinstalling libblkid... [ 3s] [11/41] preinstalling libbz2... [ 3s] [12/41] preinstalling libfreebl3... [ 3s] [13/41] preinstalling libgcc... [ 3s] [14/41] preinstalling liblua... [ 3s] [15/41] preinstalling liblzma... [ 3s] [16/41] preinstalling libpopt... [ 3s] [17/41] preinstalling libreadline... [ 3s] [18/41] preinstalling libsmack... [ 3s] [19/41] preinstalling libsqlite... [ 4s] [20/41] preinstalling libuuid... [ 4s] [21/41] preinstalling libzstd1... [ 4s] [22/41] preinstalling nspr... [ 4s] [23/41] preinstalling sed... [ 4s] [24/41] preinstalling zlib... [ 4s] [25/41] preinstalling qemu-accel-x86_64-aarch64... [ 12s] [26/41] preinstalling qemu-linux-user-x86_64-cross... [ 16s] [27/41] preinstalling coreutils... [ 16s] [28/41] preinstalling libacl... [ 16s] [29/41] preinstalling libcap... [ 16s] [30/41] preinstalling libelf... [ 16s] [31/41] preinstalling libmount... [ 16s] [32/41] preinstalling smack... [ 16s] [33/41] preinstalling bzip2... [ 16s] [34/41] preinstalling libmagic... [ 16s] [35/41] preinstalling libxml2... [ 16s] [36/41] preinstalling tar... [ 16s] [37/41] preinstalling util-linux... [ 17s] [38/41] preinstalling util-linux-su... [ 17s] [39/41] preinstalling nss... [ 17s] [40/41] preinstalling libsoftokn3... [ 17s] [41/41] preinstalling rpm... [ 17s] running qemu-linux-user-x86_64-cross postinstall script [ 17s] running qemu-accel-x86_64-aarch64 postinstall script [ 18s] running setup postinstall script [ 18s] chroot: failed to run command '': No such file or directory [ 18s] initializing rpm db... [ 18s] reordering...cycle: libsoftokn3 -> nss [ 18s] breaking dependency nss -> libsoftokn3 [ 18s] done [ 18s] querying package ids... [ 18s] [1/102] cumulate libmagic-data-5.45-1.3 [ 18s] [2/102] cumulate setup-0.9-1.35 [ 18s] [3/102] cumulate filesystem-3.1-1.1 [ 18s] [4/102] cumulate glibc-2.30-1.6 [ 18s] [5/102] cumulate bash-3.2.57-1.1 [ 18s] [6/102] cumulate cpio-2.8-1.1 [ 18s] [7/102] cumulate diffutils-3.10-1.1 [ 18s] [8/102] cumulate findutils-4.3.8-1.4 [ 18s] [9/102] cumulate gdbm-1.8.3-1.6 [ 18s] [10/102] cumulate hostname-3.23-1.1 [ 18s] [11/102] cumulate libatomic-9.2.0-1.6 [ 18s] [12/102] cumulate libattr-2.5.1-1.4 [ 18s] [13/102] cumulate libblkid-2.39.3-1.3 [ 18s] [14/102] cumulate libbz2-1.0.8-1.4 [ 18s] [15/102] cumulate libexpat-2.6.2-1.5 [ 18s] [16/102] cumulate libffi-3.4.2-1.5 [ 18s] [17/102] cumulate libfreebl3-3.98-1.5 [ 19s] [18/102] cumulate libgcc-9.2.0-1.6 [ 19s] [19/102] cumulate libgomp-9.2.0-1.6 [ 19s] [20/102] cumulate libitm-9.2.0-1.6 [ 19s] [21/102] cumulate libltdl-2.4.7-1.6 [ 19s] [22/102] cumulate liblua-5.1.5-1.4 [ 19s] [23/102] cumulate liblzma-5.4.5-1.6 [ 19s] [24/102] cumulate libopenssl3-3.0.13-1.6 [ 19s] [25/102] cumulate libpcre-8.45-1.4 [ 19s] [26/102] cumulate libpopt-1.16-1.3 [ 19s] [27/102] cumulate libpython3_121_0-3.12.0-1.5 [ 19s] [28/102] cumulate libsmack-1.3.1-1.3 [ 19s] [29/102] cumulate libsmartcols-2.39.3-1.3 [ 19s] [30/102] cumulate libsqlite-3.44.0-1.4 [ 19s] [31/102] cumulate libuuid-2.39.3-1.3 [ 19s] [32/102] cumulate libzstd1-1.5.5-1.5 [ 19s] [33/102] cumulate m4-1.4.19-1.1 [ 19s] [34/102] cumulate net-tools-2.0_20121208git-1.3 [ 19s] [35/102] cumulate nspr-4.35-1.4 [ 19s] [36/102] cumulate patch-2.7.6-1.3 [ 19s] [37/102] cumulate pkg-config-0.29.2-1.4 [ 19s] [38/102] cumulate sed-4.1c-1.4 [ 19s] [39/102] cumulate update-alternatives-1.22.2-3.1 [ 19s] [40/102] cumulate which-2.17-2.1 [ 19s] [41/102] cumulate zlib-1.3-1.5 [ 19s] [42/102] cumulate build-compare-2023.06.18-1.1 [ 19s] [43/102] cumulate hal-rootstrap-checker-0.1.0-5.1 [ 19s] [44/102] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.1 [ 19s] [45/102] cumulate coreutils-6.9-14.1 [ 19s] [46/102] cumulate cpp-9.2.0-1.6 [ 19s] [47/102] cumulate gawk-3.1.5-1.1 [ 19s] [48/102] cumulate gcc-c++-9.2.0-1.6 [ 19s] [49/102] cumulate grep-2.5.2-1.3 [ 19s] [50/102] cumulate libacl-2.3.2-1.4 [ 19s] [51/102] cumulate libcap-2.69-1.5 [ 19s] [52/102] cumulate libelf-0.189-1.6 [ 19s] [53/102] cumulate libgfortran-9.2.0-1.6 [ 19s] [54/102] cumulate libmount-2.39.3-1.3 [ 19s] [55/102] cumulate libstdc++-9.2.0-1.6 [ 19s] [56/102] cumulate make-4.3-1.4 [ 19s] [57/102] cumulate nss-certs-3.98-1.5 [ 19s] [58/102] cumulate smack-1.3.1-1.3 [ 19s] [59/102] cumulate bzip2-1.0.8-1.4 [ 19s] [60/102] cumulate libfdisk-2.39.3-1.3 [ 19s] [61/102] cumulate libmagic-5.45-1.3 [ 19s] [62/102] cumulate libxml2-2.12.5-1.5 [ 19s] [63/102] cumulate perl-5.38.0-1.4 [ 19s] [64/102] cumulate xz-5.4.5-1.6 [ 19s] [65/102] cumulate build-mkbaselibs-20120927-1.1 [ 19s] [66/102] cumulate libstdc++-devel-9.2.0-1.6 [ 19s] [67/102] cumulate file-5.45-1.3 [ 19s] [68/102] cumulate linux-glibc-devel-5.4-1.5 [ 19s] [69/102] cumulate tar-1.17-3.1 [ 19s] [70/102] cumulate terminfo-base-full-6.4-1.6 [ 19s] [71/102] cumulate autoconf-2.71-1.6 [ 19s] [72/102] cumulate binutils-2.33.1-1.6 [ 19s] [73/102] cumulate glibc-locale-2.30-1.6 [ 19s] [74/102] cumulate gzip-1.3.12-1.3 [ 19s] [75/102] cumulate libcc1-9.2.0-1.6 [ 19s] [76/102] cumulate libubsan-9.2.0-1.6 [ 19s] [77/102] cumulate pam-1.1.6-1.3 [ 19s] [78/102] cumulate tzdata-2023c-1.1 [ 19s] [79/102] cumulate libdw-0.189-1.6 [ 19s] [80/102] cumulate libarchive-3.7.2-1.5 [ 19s] [81/102] cumulate glibc-devel-2.30-1.6 [ 19s] [82/102] cumulate automake-1.16.5-1.5 [ 19s] [83/102] cumulate libasm-0.189-1.6 [ 19s] [84/102] cumulate libncurses6-6.4-1.6 [ 19s] [85/102] cumulate build-20120927-1.1 [ 19s] [86/102] cumulate gcc-9.2.0-1.6 [ 19s] [87/102] cumulate libncurses-6.4-1.6 [ 19s] [88/102] cumulate less-643-1.1 [ 19s] [89/102] cumulate libreadline-5.2-1.5 [ 19s] [90/102] cumulate qemu-accel-x86_64-aarch64-0.4-1.1 [ 19s] [91/102] cumulate libtool-2.4.7-1.6 [ 19s] [92/102] cumulate elfutils-0.189-1.6 [ 19s] [93/102] cumulate python3-base-3.12.0-1.5 [ 19s] [94/102] cumulate util-linux-2.39.3-1.3 [ 19s] [95/102] cumulate python3-3.12.0-1.1 [ 19s] [96/102] cumulate util-linux-su-2.39.3-1.3 [ 19s] [97/102] cumulate python3-devel-3.12.0-1.5 [ 19s] [98/102] cumulate python3-setuptools-69.0.2-1.1 [ 19s] [99/102] cumulate nss-3.98-1.5 [ 19s] [100/102] cumulate libsoftokn3-3.98-1.5 [ 19s] [101/102] cumulate rpm-4.14.1.1-1.6 [ 19s] [102/102] cumulate rpm-build-4.14.1.1-1.6 [ 19s] now installing cumulated packages [ 19s] Preparing... ######################################## [ 19s] Updating / installing... [ 20s] setup-0.9-1.35 ######################################## [ 20s] filesystem-3.1-1.1 ######################################## [ 20s] glibc-2.30-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 20s] ######################################## [ 20s] bash-3.2.57-1.1 ######################################## [ 20s] zlib-1.3-1.5 ######################################## [ 21s] libgcc-9.2.0-1.6 ######################################## [ 21s] libstdc++-9.2.0-1.6 ######################################## [ 22s] coreutils-6.9-14.1 ######################################## [ 22s] libbz2-1.0.8-1.4 ######################################## [ 22s] liblzma-5.4.5-1.6 ######################################## [ 23s] libelf-0.189-1.6 ######################################## [ 23s] libdw-0.189-1.6 ######################################## [ 23s] libblkid-2.39.3-1.3 ######################################## [ 23s] nspr-4.35-1.4 ######################################## [ 24s] pam-1.1.6-1.3 ######################################## [ 25s] binutils-2.33.1-1.6 ######################################## [ 25s] libcap-2.69-1.5 ######################################## [ 25s] gdbm-1.8.3-1.6 ######################################## [ 30s] perl-5.38.0-1.4 ######################################## [ 30s] libfreebl3-3.98-1.5 ######################################## [ 30s] liblua-5.1.5-1.4 ######################################## [ 31s] libopenssl3-3.0.13-1.6 ######################################## [ 31s] libpopt-1.16-1.3 ######################################## [ 32s] libpython3_121_0-3.12.0-1.5 ######################################## [ 32s] libsqlite-3.44.0-1.4 ######################################## [ 32s] libuuid-2.39.3-1.3 ######################################## [ 33s] libzstd1-1.5.5-1.5 ######################################## [ 33s] libfdisk-2.39.3-1.3 ######################################## [ 33s] build-mkbaselibs-20120927-1.1 ######################################## [ 33s] nss-certs-3.98-1.5 ######################################## [ 34s] libsoftokn3-3.98-1.5 ######################################## [ 34s] nss-3.98-1.5 ######################################## [ 34s] libmount-2.39.3-1.3 ######################################## [ 35s] libasm-0.189-1.6 ######################################## [ 35s] libxml2-2.12.5-1.5 ######################################## [ 35s] xz-5.4.5-1.6 ######################################## [ 35s] bzip2-1.0.8-1.4 ######################################## [ 36s] linux-glibc-devel-5.4-1.5 ######################################## [ 36s] glibc-devel-2.30-1.6 ######################################## [ 36s] terminfo-base-full-6.4-1.6 ######################################## [ 36s] libncurses6-6.4-1.6 ######################################## [ 37s] libreadline-5.2-1.5 ######################################## [ 37s] gzip-1.3.12-1.3 ######################################## [ 37s] libcc1-9.2.0-1.6 ######################################## [ 37s] libubsan-9.2.0-1.6 ######################################## [ 38s] libgfortran-9.2.0-1.6 ######################################## [ 38s] make-4.3-1.4 ######################################## [ 38s] findutils-4.3.8-1.4 ######################################## [ 38s] libatomic-9.2.0-1.6 ######################################## [ 38s] libattr-2.5.1-1.4 ######################################## [ 38s] libacl-2.3.2-1.4 ######################################## [ 39s] tar-1.17-3.1 ######################################## [ 39s] libarchive-3.7.2-1.5 ######################################## [ 39s] libexpat-2.6.2-1.5 ######################################## [ 39s] libffi-3.4.2-1.5 ######################################## [ 40s] python3-base-3.12.0-1.5 ######################################## [ 41s] python3-3.12.0-1.1 ######################################## [ 41s] libgomp-9.2.0-1.6 ######################################## [ 41s] libitm-9.2.0-1.6 ######################################## [ 42s] gcc-9.2.0-1.6 ######################################## [ 42s] libltdl-2.4.7-1.6 ######################################## [ 42s] libpcre-8.45-1.4 ######################################## [ 42s] libsmack-1.3.1-1.3 ######################################## [ 42s] libsmartcols-2.39.3-1.3 ######################################## [ 43s] m4-1.4.19-1.1 ######################################## [ 43s] autoconf-2.71-1.6 ######################################## [ 43s] automake-1.16.5-1.5 ######################################## [ 43s] patch-2.7.6-1.3 ######################################## [ 43s] pkg-config-0.29.2-1.4 ######################################## [ 43s] sed-4.1c-1.4 ######################################## [ 43s] util-linux-2.39.3-1.3 ######################################## [ 44s] libmagic-data-5.45-1.3 ######################################## [ 44s] libmagic-5.45-1.3 ######################################## [ 45s] rpm-4.14.1.1-1.6 ######################################## [ 45s] rpm-build-4.14.1.1-1.6 ######################################## [ 45s] file-5.45-1.3 ######################################## [ 45s] util-linux-su-2.39.3-1.3 ######################################## [ 45s] python3-devel-3.12.0-1.5 ######################################## [ 45s] libtool-2.4.7-1.6 ######################################## [ 45s] smack-1.3.1-1.3 ######################################## [ 45s] grep-2.5.2-1.3 ######################################## [ 60s] qemu-accel-x86_64-aarch64-0.4-1.1 ######################################## [ 61s] python3-setuptools-69.0.2-1.1 ######################################## [ 61s] build-20120927-1.1 ######################################## [ 61s] libncurses-6.4-1.6 ######################################## [ 61s] less-643-1.1 ######################################## [ 61s] elfutils-0.189-1.6 ######################################## [ 61s] glibc-locale-2.30-1.6 ######################################## [ 62s] tzdata-2023c-1.1 ######################################## [ 62s] libstdc++-devel-9.2.0-1.6 ######################################## [ 63s] cpp-9.2.0-1.6 ######################################## [ 64s] gcc-c++-9.2.0-1.6 ######################################## [ 64s] build-compare-2023.06.18-1.1 ######################################## [ 64s] hal-rootstrap-checker-0.1.0-5.1 ######################################## [ 70s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 71s] gawk-3.1.5-1.1 ######################################## [ 71s] cpio-2.8-1.1 ######################################## [ 71s] diffutils-3.10-1.1 ######################################## [ 71s] hostname-3.23-1.1 ######################################## [ 71s] net-tools-2.0_20121208git-1.3 ######################################## [ 71s] update-alternatives-1.22.2-3.1 ######################################## [ 71s] which-2.17-2.1 ######################################## [ 72s] now finalizing build dir... [ 73s] ----------------------------------------------------------------- [ 73s] I have the following modifications for python3-nose.spec: [ 73s] 4c4 [ 73s] < Release: 0 [ 73s] --- [ 73s] > Release: 1.1 [ 73s] build target is aarch64-tizen-linux [ 73s] ----------------------------------------------------------------- [ 73s] ----- building python3-nose.spec (user abuild) [ 73s] ----------------------------------------------------------------- [ 73s] ----------------------------------------------------------------- [ 74s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-9.0-Base/standard/21fabebcca7f55a09c8b45ef1a2586c3-python3-nose' /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 74s] Building target platforms: aarch64-tizen-linux [ 74s] Building for target aarch64-tizen-linux [ 74s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.3yYPUA [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + rm -rf nose-1.2.1 [ 74s] + /bin/tar -xof - [ 74s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/nose-1.2.1.tar.gz [ 74s] + STATUS=0 [ 74s] + '[' 0 -ne 0 ']' [ 74s] + cd nose-1.2.1 [ 74s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 74s] + cp /home/abuild/rpmbuild/SOURCES/python3-nose.manifest . [ 74s] + sed -i s,man/man1,share/man/man1, setup.py [ 74s] + exit 0 [ 74s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.acfbeB [ 74s] + umask 022 [ 74s] + cd /home/abuild/rpmbuild/BUILD [ 74s] + cd nose-1.2.1 [ 74s] + ref=/usr/lib/rpm [ 74s] + mints=0 [ 74s] + case $(uname -m) in [ 74s] ++ uname -m [ 74s] + mints=20120610 [ 74s] + for s in guess sub [ 74s] ++ find -maxdepth 8 -name config.guess [ 74s] + for s in guess sub [ 74s] ++ find -maxdepth 8 -name config.sub [ 74s] + LANG=C [ 74s] + export LANG [ 74s] + unset DISPLAY [ 74s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 74s] + export CFLAGS [ 74s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 74s] + export CXXFLAGS [ 74s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 74s] + export FFLAGS [ 74s] + LDFLAGS= [ 74s] + export LDFLAGS [ 74s] + /usr/bin/python3 setup.py build [ 75s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 75s] "sys.exit\(\n" [ 75s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 75s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 75s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 75s] "\)\n") [ 77s] + exit 0 [ 77s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.28bvly [ 77s] + umask 022 [ 77s] + cd /home/abuild/rpmbuild/BUILD [ 77s] + cd nose-1.2.1 [ 77s] + LANG=C [ 77s] + export LANG [ 77s] + unset DISPLAY [ 77s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 77s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 77s] + /usr/bin/python3 setup.py install --prefix=/usr --root=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 77s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:53: SyntaxWarning: invalid escape sequence '\(' [ 77s] "sys.exit\(\n" [ 77s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:54: SyntaxWarning: invalid escape sequence '\(' [ 77s] " load_entry_point\(([^\)]+)\)\(\)\n" [ 77s] /home/abuild/rpmbuild/BUILD/nose-1.2.1/setup.py:55: SyntaxWarning: invalid escape sequence '\)' [ 77s] "\)\n") [ 79s] /usr/lib/python3.12/site-packages/setuptools/_distutils/cmd.py:66: SetuptoolsDeprecationWarning: setup.py install is deprecated. [ 79s] !! [ 79s] [ 79s] ******************************************************************************** [ 79s] Please avoid running ``setup.py`` directly. [ 79s] Instead, use pypa/build, pypa/installer or other [ 79s] standards-based tools. [ 79s] [ 79s] See https://blog.ganssle.io/articles/2021/10/setup-py-deprecated.html for details. [ 79s] ******************************************************************************** [ 79s] [ 79s] !! [ 79s] self.initialize_options() [ 79s] File "/usr/lib/python3.12/site-packages/nose/ext/dtcompat.py", line 344 [ 79s] raise TypeError, 'Expected a module: %r' % module [ 79s] ^ [ 79s] SyntaxError: invalid syntax [ 79s] [ 79s] File "/usr/lib/python3.12/site-packages/nose/failure.py", line 37 [ 79s] raise self.exc_class, self.exc_val, self.tb [ 79s] ^ [ 79s] SyntaxError: invalid syntax [ 79s] [ 79s] File "/usr/lib/python3.12/site-packages/nose/twistedtools.py", line 169 [ 80s] raise exc_type, exc_value, tb [ 80s] ^ [ 80s] SyntaxError: invalid syntax [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/inspector.py", line 41 [ 80s] except tokenize.TokenError, e: [ 80s] ^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/core.py", line 143 [ 80s] print "%s version %s" % (os.path.basename(sys.argv[0]), __version__) [ 80s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/plugins/plugintest.py", line 407 [ 80s] print munge_nose_output_for_doctest(out) [ 80s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: Missing parentheses in call to 'print'. Did you mean print(...)? [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/plugins/doctests.py", line 277 [ 80s] except ImportError, e: [ 80s] ^^^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/plugins/multiprocess.py", line 466 [ 80s] except (KeyboardInterrupt, SystemExit), e: [ 80s] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/plugins/manager.py", line 390 [ 80s] except Exception, e: [ 80s] ^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/plugins/base.py", line 70 [ 80s] except OptionConflictError, e: [ 80s] ^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 80s] File "/usr/lib/python3.12/site-packages/nose/config.py", line 66 [ 80s] except ConfigParser.Error, exc: [ 80s] ^^^^^^^^^^^^^^^^^^^^^^^ [ 80s] SyntaxError: multiple exception types must be parenthesized [ 80s] [ 81s] no previously-included directories found matching 'doc/.build' [ 82s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.2.1-1.1 --unique-debug-src-base python3-nose-1.2.1-1.1.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/nose-1.2.1 [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debuginfo.manifest [ 82s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/nose-1.2.1/python3-nose-debugsource.manifest [ 82s] + /usr/lib/rpm/check-buildroot [ 82s] + /usr/lib/rpm//brp-compress [ 82s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 83s] + /usr/lib/rpm/brp-python-hardlink [ 86s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 87s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/nose-1.2.1/isu.list [ 87s] ~/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 ~/rpmbuild/BUILD/nose-1.2.1 [ 87s] ~/rpmbuild/BUILD/nose-1.2.1 [ 87s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 88s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 88s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 88s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 88s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 88s] error: Unable to open /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 88s] /home/abuild/rpmbuild/SOURCES/python-nose.spec: No such file or directory [ 88s] error: query of specfile /home/abuild/rpmbuild/SOURCES/python3-nose.spec [ 88s] /home/abuild/rpmbuild/SOURCES/python-nose.spec failed, can't parse [ 88s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.w3lpEy [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd nose-1.2.1 [ 88s] + exit 0 [ 88s] Processing files: python3-nose-1.2.1-1.1.noarch [ 88s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 88s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 88s] [ 88s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.nowQbx [ 88s] + umask 022 [ 88s] + cd /home/abuild/rpmbuild/BUILD [ 88s] + cd nose-1.2.1 [ 88s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 88s] + export LC_ALL=C [ 88s] + LC_ALL=C [ 88s] + export DOCDIR [ 88s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 88s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 88s] + cp -pr README.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 88s] + cp -pr lgpl.txt /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64/usr/share/doc/packages/python3-nose [ 88s] + exit 0 [ 91s] Provides: python3-nose = 1.2.1-1.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /usr/bin/python3 [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/python3-nose-1.2.1-1.1.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/python3-nose-1.2.1-1.1.noarch.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.3fOpKy [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd nose-1.2.1 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/python3-nose-1.2.1-1.1.aarch64 [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] [ 92s] 7ecdb9b085e4 finished "build python3-nose.spec" at Fri Oct 25 07:57:56 UTC 2024. [ 92s] Retried build at Tue Nov 26 13:11:32 2024 returned same result, skipped