[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 7ecdb9b085e4 started "build autoconf213.spec" at Fri Oct 25 08:32:56 UTC 2024. [ 0s] [ 0s] Building autoconf213 for project 'Tizen-9.0-Base' repository 'standard' arch 'armv7hl' srcmd5 '259021431be8b5acdb85bd696e6b7a42' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/autoconf213.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/autoconf213.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/21/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.21/.build-srcdir/autoconf213.spec build ... [ 11s] registering binfmt handlers for cross build [ 20s] cycle: nss -> libsoftokn3 [ 20s] breaking dependency nss -> libsoftokn3 [ 20s] [1/41] preinstalling libmagic-data... [ 20s] [2/41] preinstalling libncurses... [ 21s] [3/41] preinstalling setup... [ 21s] [4/41] preinstalling filesystem... [ 22s] [5/41] preinstalling glibc... [ 22s] [6/41] preinstalling libgcc... [ 23s] [7/41] preinstalling bash... [ 23s] [8/41] preinstalling diffutils... [ 23s] [9/41] preinstalling grep... [ 24s] [10/41] preinstalling libattr... [ 24s] [11/41] preinstalling libblkid... [ 24s] [12/41] preinstalling libbz2... [ 25s] [13/41] preinstalling libcap... [ 25s] [14/41] preinstalling libfreebl3... [ 25s] [15/41] preinstalling liblua... [ 25s] [16/41] preinstalling liblzma... [ 25s] [17/41] preinstalling libpopt... [ 25s] [18/41] preinstalling libreadline... [ 26s] [19/41] preinstalling libsmack... [ 26s] [20/41] preinstalling libsqlite... [ 26s] [21/41] preinstalling libuuid... [ 26s] [22/41] preinstalling libzstd1... [ 27s] [23/41] preinstalling nspr... [ 27s] [24/41] preinstalling sed... [ 28s] [25/41] preinstalling zlib... [ 28s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 41s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 45s] [28/41] preinstalling coreutils... [ 45s] [29/41] preinstalling libacl... [ 45s] [30/41] preinstalling libelf... [ 45s] [31/41] preinstalling libmount... [ 46s] [32/41] preinstalling smack... [ 46s] [33/41] preinstalling bzip2... [ 46s] [34/41] preinstalling libmagic... [ 46s] [35/41] preinstalling libxml2... [ 46s] [36/41] preinstalling tar... [ 46s] [37/41] preinstalling util-linux... [ 46s] [38/41] preinstalling util-linux-su... [ 47s] [39/41] preinstalling nss... [ 47s] [40/41] preinstalling libsoftokn3... [ 47s] [41/41] preinstalling rpm... [ 48s] running qemu-linux-user-x86_64-cross postinstall script [ 48s] running qemu-accel-x86_64-armv7hl postinstall script [ 48s] running setup postinstall script [ 48s] chroot: failed to run command '': No such file or directory [ 48s] initializing rpm db... [ 49s] reordering...cycle: libsoftokn3 -> nss [ 49s] breaking dependency nss -> libsoftokn3 [ 49s] done [ 49s] querying package ids... [ 50s] [1/97] cumulate libmagic-data-5.45-1.3 [ 50s] [2/97] cumulate setup-0.9-1.35 [ 50s] [3/97] cumulate filesystem-3.1-1.1 [ 50s] [4/97] cumulate glibc-2.30-1.6 [ 50s] [5/97] cumulate libatomic-9.2.0-1.6 [ 50s] [6/97] cumulate libgcc-9.2.0-1.6 [ 50s] [7/97] cumulate bash-3.2.57-3.1 [ 50s] [8/97] cumulate cpio-2.8-1.1 [ 50s] [9/97] cumulate diffutils-3.10-1.1 [ 50s] [10/97] cumulate findutils-4.3.8-1.3 [ 50s] [11/97] cumulate gdbm-1.8.3-1.6 [ 50s] [12/97] cumulate hostname-3.23-1.1 [ 50s] [13/97] cumulate libattr-2.5.1-1.3 [ 50s] [14/97] cumulate libblkid-2.39.3-1.3 [ 50s] [15/97] cumulate libbz2-1.0.8-1.4 [ 50s] [16/97] cumulate libcap-2.69-1.5 [ 50s] [17/97] cumulate libfreebl3-3.98-1.6 [ 50s] [18/97] cumulate libgfortran-9.2.0-1.6 [ 50s] [19/97] cumulate libgomp-9.2.0-1.6 [ 50s] [20/97] cumulate libitm-9.2.0-1.6 [ 50s] [21/97] cumulate libltdl-2.4.7-1.6 [ 50s] [22/97] cumulate liblua-5.1.5-1.3 [ 50s] [23/97] cumulate liblzma-5.4.5-1.6 [ 50s] [24/97] cumulate libopenssl3-3.0.13-1.6 [ 50s] [25/97] cumulate libpcre-8.45-1.3 [ 50s] [26/97] cumulate libpopt-1.16-1.3 [ 50s] [27/97] cumulate libsmack-1.3.1-1.3 [ 50s] [28/97] cumulate libsmartcols-2.39.3-1.3 [ 50s] [29/97] cumulate libsqlite-3.44.0-1.3 [ 50s] [30/97] cumulate libstdc++-9.2.0-1.6 [ 50s] [31/97] cumulate libuuid-2.39.3-1.3 [ 50s] [32/97] cumulate libzstd1-1.5.5-1.4 [ 50s] [33/97] cumulate m4-1.4.19-1.1 [ 50s] [34/97] cumulate net-tools-2.0_20121208git-1.3 [ 50s] [35/97] cumulate nspr-4.35-1.3 [ 50s] [36/97] cumulate patch-2.7.6-1.3 [ 50s] [37/97] cumulate pkg-config-0.29.2-1.5 [ 50s] [38/97] cumulate sed-4.1c-1.3 [ 50s] [39/97] cumulate update-alternatives-1.22.2-3.1 [ 50s] [40/97] cumulate which-2.17-2.1 [ 50s] [41/97] cumulate zlib-1.3-1.5 [ 50s] [42/97] cumulate build-compare-2023.06.18-2.11 [ 50s] [43/97] cumulate hal-rootstrap-checker-0.1.0-5.1 [ 50s] [44/97] cumulate libstdc++-devel-9.2.0-1.6 [ 50s] [45/97] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.1 [ 50s] [46/97] cumulate cpp-9.2.0-1.6 [ 50s] [47/97] cumulate gcc-c++-9.2.0-1.6 [ 50s] [48/97] cumulate binutils-2.33.1-1.6 [ 50s] [49/97] cumulate coreutils-6.9-17.8 [ 50s] [50/97] cumulate gawk-3.1.5-3.1 [ 50s] [51/97] cumulate grep-2.5.2-1.3 [ 50s] [52/97] cumulate libacl-2.3.2-1.3 [ 50s] [53/97] cumulate libcc1-9.2.0-1.6 [ 50s] [54/97] cumulate libelf-0.189-1.6 [ 50s] [55/97] cumulate libmount-2.39.3-1.3 [ 50s] [56/97] cumulate libubsan-9.2.0-1.6 [ 50s] [57/97] cumulate make-4.3-1.3 [ 50s] [58/97] cumulate nss-certs-3.98-1.6 [ 50s] [59/97] cumulate smack-1.3.1-1.3 [ 50s] [60/97] cumulate bzip2-1.0.8-1.4 [ 50s] [61/97] cumulate libfdisk-2.39.3-1.3 [ 50s] [62/97] cumulate libmagic-5.45-1.3 [ 50s] [63/97] cumulate libxml2-2.12.5-1.5 [ 50s] [64/97] cumulate perl-5.38.0-1.4 [ 50s] [65/97] cumulate xz-5.4.5-1.6 [ 50s] [66/97] cumulate build-mkbaselibs-20120927-2.1 [ 50s] [67/97] cumulate linux-glibc-devel-5.4-1.5 [ 50s] [68/97] cumulate terminfo-base-full-6.4-1.6 [ 50s] [69/97] cumulate texinfo-7.1-1.4 [ 50s] [70/97] cumulate autoconf-2.71-1.6 [ 50s] [71/97] cumulate file-5.45-1.3 [ 50s] [72/97] cumulate glibc-locale-2.30-1.6 [ 50s] [73/97] cumulate tar-1.17-3.1 [ 50s] [74/97] cumulate gzip-1.3.12-1.3 [ 50s] [75/97] cumulate pam-1.1.6-1.5 [ 50s] [76/97] cumulate tzdata-2023c-1.1 [ 50s] [77/97] cumulate libdw-0.189-1.6 [ 50s] [78/97] cumulate libarchive-3.7.2-1.5 [ 50s] [79/97] cumulate gcc-9.2.0-1.6 [ 50s] [80/97] cumulate makeinfo-7.1-1.4 [ 50s] [81/97] cumulate glibc-devel-2.30-1.6 [ 50s] [82/97] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 50s] [83/97] cumulate automake-1.16.5-1.6 [ 50s] [84/97] cumulate libasm-0.189-1.6 [ 50s] [85/97] cumulate libncurses6-6.4-1.6 [ 50s] [86/97] cumulate build-20120927-2.1 [ 50s] [87/97] cumulate libncurses-6.4-1.6 [ 50s] [88/97] cumulate less-643-2.1 [ 50s] [89/97] cumulate libreadline-5.2-1.5 [ 50s] [90/97] cumulate libtool-2.4.7-1.6 [ 50s] [91/97] cumulate elfutils-0.189-1.6 [ 50s] [92/97] cumulate util-linux-2.39.3-1.3 [ 50s] [93/97] cumulate util-linux-su-2.39.3-1.3 [ 50s] [94/97] cumulate nss-3.98-1.6 [ 50s] [95/97] cumulate libsoftokn3-3.98-1.6 [ 50s] [96/97] cumulate rpm-4.14.1.1-1.6 [ 50s] [97/97] cumulate rpm-build-4.14.1.1-1.6 [ 50s] now installing cumulated packages [ 51s] Preparing... ######################################## [ 51s] Updating / installing... [ 51s] setup-0.9-1.35 ######################################## [ 51s] filesystem-3.1-1.1 ######################################## [ 51s] libmagic-data-5.45-1.3 ######################################## [ 52s] glibc-2.30-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 52s] ######################################## [ 53s] libgcc-9.2.0-1.6 ######################################## [ 53s] bash-3.2.57-3.1 ######################################## [ 53s] zlib-1.3-1.5 ######################################## [ 54s] coreutils-6.9-17.8 ######################################## [ 54s] libstdc++-9.2.0-1.6 ######################################## [ 55s] libbz2-1.0.8-1.4 ######################################## [ 55s] liblzma-5.4.5-1.6 ######################################## [ 55s] libelf-0.189-1.6 ######################################## [ 56s] libdw-0.189-1.6 ######################################## [ 56s] libmagic-5.45-1.3 ######################################## [ 56s] libblkid-2.39.3-1.3 ######################################## [ 57s] nspr-4.35-1.3 ######################################## [ 59s] binutils-2.33.1-1.6 ######################################## [ 59s] pam-1.1.6-1.5 ######################################## [ 59s] libcap-2.69-1.5 ######################################## [ 60s] libfreebl3-3.98-1.6 ######################################## [ 60s] liblua-5.1.5-1.3 ######################################## [ 60s] libpopt-1.16-1.3 ######################################## [ 61s] libuuid-2.39.3-1.3 ######################################## [ 61s] libzstd1-1.5.5-1.4 ######################################## [ 63s] linux-glibc-devel-5.4-1.5 ######################################## [ 63s] terminfo-base-full-6.4-1.6 ######################################## [ 63s] libncurses6-6.4-1.6 ######################################## [ 64s] libreadline-5.2-1.5 ######################################## [ 64s] glibc-devel-2.30-1.6 ######################################## [ 65s] libfdisk-2.39.3-1.3 ######################################## [ 65s] nss-certs-3.98-1.6 ######################################## [ 65s] libmount-2.39.3-1.3 ######################################## [ 65s] libasm-0.189-1.6 ######################################## [ 66s] libxml2-2.12.5-1.5 ######################################## [ 66s] xz-5.4.5-1.6 ######################################## [ 66s] bzip2-1.0.8-1.4 ######################################## [ 66s] libcc1-9.2.0-1.6 ######################################## [ 66s] libubsan-9.2.0-1.6 ######################################## [ 67s] gzip-1.3.12-1.3 ######################################## [ 67s] make-4.3-1.3 ######################################## [ 67s] findutils-4.3.8-1.3 ######################################## [ 67s] gdbm-1.8.3-1.6 ######################################## [ 75s] perl-5.38.0-1.4 ######################################## [ 75s] build-mkbaselibs-20120927-2.1 ######################################## [ 75s] texinfo-7.1-1.4 ######################################## [ 76s] libattr-2.5.1-1.3 ######################################## [ 76s] libacl-2.3.2-1.3 ######################################## [ 76s] tar-1.17-3.1 ######################################## [ 76s] libgfortran-9.2.0-1.6 ######################################## [ 76s] libgomp-9.2.0-1.6 ######################################## [ 77s] libitm-9.2.0-1.6 ######################################## [ 77s] libltdl-2.4.7-1.6 ######################################## [ 78s] libopenssl3-3.0.13-1.6 ######################################## [ 78s] libarchive-3.7.2-1.5 ######################################## [ 78s] libpcre-8.45-1.3 ######################################## [ 79s] libsmack-1.3.1-1.3 ######################################## [ 79s] libsmartcols-2.39.3-1.3 ######################################## [ 80s] libsqlite-3.44.0-1.3 ######################################## [ 80s] libsoftokn3-3.98-1.6 ######################################## [ 80s] nss-3.98-1.6 ######################################## [ 81s] rpm-4.14.1.1-1.6 ######################################## [ 82s] m4-1.4.19-1.1 ######################################## [ 82s] autoconf-2.71-1.6 ######################################## [ 82s] automake-1.16.5-1.6 ######################################## [ 83s] patch-2.7.6-1.3 ######################################## [ 83s] sed-4.1c-1.3 ######################################## [ 83s] util-linux-2.39.3-1.3 ######################################## [ 83s] libatomic-9.2.0-1.6 ######################################## [ 84s] libtool-2.4.7-1.6 ######################################## [ 84s] build-20120927-2.1 ######################################## [ 84s] makeinfo-7.1-1.4 ######################################## [ 84s] libncurses-6.4-1.6 ######################################## [ 86s] libstdc++-devel-9.2.0-1.6 ######################################## [ 86s] build-compare-2023.06.18-2.11 ######################################## [ 86s] hal-rootstrap-checker-0.1.0-5.1 ######################################## [ 97s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 100s] gcc-9.2.0-1.6 ######################################## [ 120s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 121s] rpm-build-4.14.1.1-1.6 ######################################## [ 121s] util-linux-su-2.39.3-1.3 ######################################## [ 121s] smack-1.3.1-1.3 ######################################## [ 121s] grep-2.5.2-1.3 ######################################## [ 121s] elfutils-0.189-1.6 ######################################## [ 121s] less-643-2.1 ######################################## [ 121s] file-5.45-1.3 ######################################## [ 122s] glibc-locale-2.30-1.6 ######################################## [ 122s] tzdata-2023c-1.1 ######################################## [ 124s] cpp-9.2.0-1.6 ######################################## [ 125s] gcc-c++-9.2.0-1.6 ######################################## [ 125s] gawk-3.1.5-3.1 ######################################## [ 125s] cpio-2.8-1.1 ######################################## [ 125s] diffutils-3.10-1.1 ######################################## [ 125s] hostname-3.23-1.1 ######################################## [ 125s] net-tools-2.0_20121208git-1.3 ######################################## [ 125s] pkg-config-0.29.2-1.5 ######################################## [ 125s] update-alternatives-1.22.2-3.1 ######################################## [ 125s] which-2.17-2.1 ######################################## [ 126s] now finalizing build dir... [ 129s] ----------------------------------------------------------------- [ 129s] I have the following modifications for autoconf213.spec: [ 129s] 9c9 [ 129s] < Release: 1 [ 129s] --- [ 129s] > Release: 1.1 [ 130s] build target is armv7hl-tizen-linux [ 130s] ----------------------------------------------------------------- [ 130s] ----- building autoconf213.spec (user abuild) [ 130s] ----------------------------------------------------------------- [ 130s] ----------------------------------------------------------------- [ 131s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-9.0-Base/standard/259021431be8b5acdb85bd696e6b7a42-autoconf213' /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 131s] Building target platforms: armv7hl-tizen-linux [ 131s] Building for target armv7hl-tizen-linux [ 131s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Od8KjD [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + rm -rf autoconf-2.13 [ 131s] + /bin/tar -xof - [ 131s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 131s] + STATUS=0 [ 131s] + '[' 0 -ne 0 ']' [ 131s] + cd autoconf-2.13 [ 131s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 131s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 131s] Patch #0 (0001-autoconf-2.12-race.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 131s] patching file autoconf.sh [ 131s] patching file autoheader.sh [ 131s] patching file autoupdate.sh [ 131s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 131s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 131s] patching file acspecific.m4 [ 131s] patching file autoconf.texi [ 131s] patching file configure [ 131s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 131s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 131s] patching file autoconf.sh [ 131s] patching file autoupdate.sh [ 131s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 131s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 131s] patching file acgeneral.m4 [ 131s] patching file acspecific.m4 [ 131s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 131s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 131s] patching file acspecific.m4 [ 131s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 131s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 131s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file autoscan.pl [ 132s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 132s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file acgeneral.m4 [ 132s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 132s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file acspecific.m4 [ 132s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 132s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file acgeneral.m4 [ 132s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 132s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file Makefile.in [ 132s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 132s] Patch #10 (0011-autoconf213-destdir.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file Makefile.in [ 132s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 132s] Patch #11 (0012-autoconf213-info.patch): [ 132s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 132s] patching file Makefile.in [ 132s] patching file autoconf.texi [ 132s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 132s] + mv autoconf.texi autoconf213.texi [ 132s] + rm -f autoconf.info [ 132s] + exit 0 [ 132s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.x0O5zC [ 132s] + umask 022 [ 132s] + cd /home/abuild/rpmbuild/BUILD [ 132s] + cd autoconf-2.13 [ 132s] + ref=/usr/lib/rpm [ 132s] + mints=0 [ 132s] + case $(uname -m) in [ 132s] ++ uname -m [ 132s] + for s in guess sub [ 132s] ++ find -maxdepth 8 -name config.guess [ 132s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 132s] + grep -q config-patches@ ./config.guess [ 132s] + continue [ 132s] + for s in guess sub [ 132s] ++ find -maxdepth 8 -name config.sub [ 132s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 132s] + grep -q config-patches@ ./config.sub [ 132s] + continue [ 132s] + LANG=C [ 132s] + export LANG [ 132s] + unset DISPLAY [ 132s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 132s] + export CFLAGS [ 132s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 132s] + export CXXFLAGS [ 132s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 132s] + export FFLAGS [ 132s] + LDFLAGS= [ 132s] + export LDFLAGS [ 132s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 133s] creating cache ./config.cache [ 133s] checking for gm4... no [ 133s] checking for gnum4... no [ 133s] checking for m4... /bin/m4 [ 133s] checking for gawk... gawk [ 133s] checking for perl... /bin/perl [ 133s] checking for a BSD compatible install... /bin/install -c [ 133s] updating cache ./config.cache [ 133s] creating ./config.status [ 134s] creating Makefile [ 135s] creating testsuite/Makefile [ 135s] + make [ 135s] cd . && \ [ 135s] rm -f configure configure.tmp && \ [ 135s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 135s] chmod +x configure.tmp && mv configure.tmp configure [ 135s] /bin/sh ./config.status --recheck [ 135s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 136s] loading cache ./config.cache [ 136s] checking for gm4... (cached) /bin/m4 [ 136s] checking for gawk... (cached) gawk [ 136s] checking for perl... (cached) /bin/perl [ 136s] checking for a BSD compatible install... (cached) /bin/install -c [ 136s] creating ./config.status [ 137s] /bin/sh ./config.status [ 137s] creating Makefile [ 137s] creating testsuite/Makefile [ 138s] rm -f autoconf autoconf.tmp [ 138s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 138s] rm -f autoheader autoheader.tmp [ 138s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 138s] rm -f autoreconf autoreconf.tmp [ 138s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 138s] rm -f autoupdate autoupdate.tmp [ 138s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 139s] rm -f ifnames ifnames.tmp [ 139s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 139s] rm -f autoscan autoscan.tmp [ 139s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 139s] freezing autoconf.m4 [ 139s] freezing autoheader.m4 [ 139s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 164s] + exit 0 [ 164s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.wKcE4z [ 164s] + umask 022 [ 164s] + cd /home/abuild/rpmbuild/BUILD [ 164s] + cd autoconf-2.13 [ 164s] + LANG=C [ 164s] + export LANG [ 164s] + unset DISPLAY [ 164s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 164s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 164s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm install [ 165s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13 [ 165s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr [ 165s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/bin [ 165s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share [ 165s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info [ 165s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/autoconf-2.13 [ 165s] if test -f autoconf213.info; then \ [ 165s] for i in *.info*; do \ [ 165s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/$i; \ [ 165s] done; \ [ 165s] else \ [ 165s] for i in ./*.info*; do \ [ 165s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 165s] done; \ [ 165s] fi [ 165s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 165s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 165s] done [ 166s] for i in autoconf.m4f autoheader.m4f; do \ [ 166s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 166s] done [ 166s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 166s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 166s] done [ 167s] if test -f autoscan; then \ [ 167s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 167s] for i in acfunctions acheaders acidentifiers acprograms \ [ 167s] acmakevars; do \ [ 167s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 167s] done; \ [ 167s] else :; fi [ 167s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/dir [ 167s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.la$' [ 167s] + xargs rm -f -- [ 167s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.a$' [ 167s] + xargs rm -f -- [ 167s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/standards.info [ 167s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13-1.1 --unique-debug-src-base autoconf213-2.13-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 169s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debuginfo.manifest [ 169s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debugsource.manifest [ 169s] + /usr/lib/rpm/check-buildroot [ 169s] + /usr/lib/rpm//brp-compress [ 169s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 170s] + /usr/lib/rpm/brp-python-hardlink [ 170s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 170s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/autoconf-2.13/isu.list [ 170s] ~/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm ~/rpmbuild/BUILD/autoconf-2.13 [ 170s] ~/rpmbuild/BUILD/autoconf-2.13 [ 170s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 176s] Processing files: autoconf213-2.13-1.1.noarch [ 176s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 176s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 176s] [ 176s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.3YHwkD [ 176s] + umask 022 [ 176s] + cd /home/abuild/rpmbuild/BUILD [ 176s] + cd autoconf-2.13 [ 176s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 176s] + export LC_ALL=C [ 176s] + LC_ALL=C [ 176s] + export DOCDIR [ 176s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 177s] + exit 0 [ 178s] Provides: autoconf213 = 2.13-1.1 [ 178s] Requires(interp): /bin/sh /bin/sh [ 178s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 178s] Requires(post): /bin/sh [ 178s] Requires(postun): /bin/sh [ 178s] Requires: /bin/perl /bin/sh [ 178s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 178s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.1.src.rpm [ 179s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.1.noarch.rpm [ 179s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.mjrLdC [ 179s] + umask 022 [ 179s] + cd /home/abuild/rpmbuild/BUILD [ 179s] + cd autoconf-2.13 [ 179s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 179s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 179s] + exit 0 [ 179s] ... checking for files with abuild user/group [ 179s] ... creating baselibs [ 180s] [ 180s] 7ecdb9b085e4 finished "build autoconf213.spec" at Fri Oct 25 08:35:56 UTC 2024. [ 180s] Retried build at Tue Nov 26 13:36:23 2024 returned same result, skipped Retried build at Tue Jan 14 09:26:46 2025 returned same result, skipped