[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.23 [ 0s] Using BUILD_ARCH=armv7hl:armv7l:armv6hl:armv6l:armv5tel [ 0s] [ 0s] [ 0s] 7ecdb9b085e4 started "build perl-PerlIO-gzip.spec" at Fri Oct 25 08:43:57 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-9.0-Base' repository 'standard' arch 'armv7hl' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.23/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.23/.build-srcdir/perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/23/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.23/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.23/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 1s] registering binfmt handlers for cross build [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 3s] [7/41] preinstalling bash... [ 3s] [8/41] preinstalling diffutils... [ 3s] [9/41] preinstalling grep... [ 3s] [10/41] preinstalling libattr... [ 3s] [11/41] preinstalling libblkid... [ 3s] [12/41] preinstalling libbz2... [ 3s] [13/41] preinstalling libcap... [ 3s] [14/41] preinstalling libfreebl3... [ 3s] [15/41] preinstalling liblua... [ 3s] [16/41] preinstalling liblzma... [ 3s] [17/41] preinstalling libpopt... [ 3s] [18/41] preinstalling libreadline... [ 3s] [19/41] preinstalling libsmack... [ 3s] [20/41] preinstalling libsqlite... [ 3s] [21/41] preinstalling libuuid... [ 3s] [22/41] preinstalling libzstd1... [ 3s] [23/41] preinstalling nspr... [ 3s] [24/41] preinstalling sed... [ 3s] [25/41] preinstalling zlib... [ 3s] [26/41] preinstalling qemu-accel-x86_64-armv7hl... [ 11s] [27/41] preinstalling qemu-linux-user-x86_64-cross... [ 15s] [28/41] preinstalling coreutils... [ 15s] [29/41] preinstalling libacl... [ 15s] [30/41] preinstalling libelf... [ 15s] [31/41] preinstalling libmount... [ 15s] [32/41] preinstalling smack... [ 15s] [33/41] preinstalling bzip2... [ 15s] [34/41] preinstalling libmagic... [ 15s] [35/41] preinstalling libxml2... [ 15s] [36/41] preinstalling tar... [ 15s] [37/41] preinstalling util-linux... [ 16s] [38/41] preinstalling util-linux-su... [ 16s] [39/41] preinstalling nss... [ 16s] [40/41] preinstalling libsoftokn3... [ 16s] [41/41] preinstalling rpm... [ 16s] running qemu-linux-user-x86_64-cross postinstall script [ 17s] running qemu-accel-x86_64-armv7hl postinstall script [ 17s] running setup postinstall script [ 17s] chroot: failed to run command '': No such file or directory [ 17s] initializing rpm db... [ 17s] reordering...cycle: libsoftokn3 -> nss [ 17s] breaking dependency nss -> libsoftokn3 [ 17s] done [ 17s] querying package ids... [ 18s] [1/96] cumulate libmagic-data-5.45-1.3 [ 18s] [2/96] cumulate setup-0.9-1.35 [ 18s] [3/96] cumulate filesystem-3.1-1.1 [ 18s] [4/96] cumulate glibc-2.30-1.6 [ 18s] [5/96] cumulate libatomic-9.2.0-1.6 [ 18s] [6/96] cumulate libgcc-9.2.0-1.6 [ 18s] [7/96] cumulate bash-3.2.57-1.1 [ 18s] [8/96] cumulate cpio-2.8-1.1 [ 18s] [9/96] cumulate diffutils-3.10-1.1 [ 18s] [10/96] cumulate findutils-4.3.8-1.3 [ 18s] [11/96] cumulate gdbm-1.8.3-1.6 [ 18s] [12/96] cumulate hostname-3.23-1.1 [ 18s] [13/96] cumulate libattr-2.5.1-1.3 [ 18s] [14/96] cumulate libblkid-2.39.3-1.3 [ 18s] [15/96] cumulate libbz2-1.0.8-1.4 [ 18s] [16/96] cumulate libcap-2.69-1.5 [ 18s] [17/96] cumulate libfreebl3-3.98-1.6 [ 18s] [18/96] cumulate libgfortran-9.2.0-1.6 [ 18s] [19/96] cumulate libgomp-9.2.0-1.6 [ 18s] [20/96] cumulate libitm-9.2.0-1.6 [ 18s] [21/96] cumulate libltdl-2.4.7-1.6 [ 18s] [22/96] cumulate liblua-5.1.5-1.3 [ 18s] [23/96] cumulate liblzma-5.4.5-1.6 [ 18s] [24/96] cumulate libopenssl3-3.0.13-1.6 [ 18s] [25/96] cumulate libpcre-8.45-1.3 [ 18s] [26/96] cumulate libpopt-1.16-1.3 [ 18s] [27/96] cumulate libsmack-1.3.1-1.3 [ 18s] [28/96] cumulate libsmartcols-2.39.3-1.3 [ 18s] [29/96] cumulate libsqlite-3.44.0-1.3 [ 18s] [30/96] cumulate libstdc++-9.2.0-1.6 [ 18s] [31/96] cumulate libuuid-2.39.3-1.3 [ 18s] [32/96] cumulate libzstd1-1.5.5-1.4 [ 18s] [33/96] cumulate m4-1.4.19-1.1 [ 18s] [34/96] cumulate net-tools-2.0_20121208git-1.3 [ 18s] [35/96] cumulate nspr-4.35-1.3 [ 18s] [36/96] cumulate patch-2.7.6-1.3 [ 18s] [37/96] cumulate pkg-config-0.29.2-1.5 [ 18s] [38/96] cumulate sed-4.1c-1.3 [ 18s] [39/96] cumulate update-alternatives-1.22.2-3.1 [ 18s] [40/96] cumulate which-2.17-2.1 [ 18s] [41/96] cumulate zlib-1.3-1.5 [ 18s] [42/96] cumulate build-compare-2023.06.18-1.1 [ 18s] [43/96] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 18s] [44/96] cumulate libstdc++-devel-9.2.0-1.6 [ 18s] [45/96] cumulate qemu-linux-user-x86_64-cross-5.2.0-20.1 [ 18s] [46/96] cumulate cpp-9.2.0-1.6 [ 18s] [47/96] cumulate gcc-c++-9.2.0-1.6 [ 18s] [48/96] cumulate binutils-2.33.1-1.6 [ 18s] [49/96] cumulate coreutils-6.9-17.8 [ 18s] [50/96] cumulate gawk-3.1.5-3.1 [ 18s] [51/96] cumulate grep-2.5.2-1.3 [ 18s] [52/96] cumulate libacl-2.3.2-1.3 [ 18s] [53/96] cumulate libcc1-9.2.0-1.6 [ 18s] [54/96] cumulate libelf-0.189-1.6 [ 18s] [55/96] cumulate libmount-2.39.3-1.3 [ 18s] [56/96] cumulate libubsan-9.2.0-1.6 [ 18s] [57/96] cumulate make-4.3-1.3 [ 18s] [58/96] cumulate nss-certs-3.98-1.6 [ 18s] [59/96] cumulate smack-1.3.1-1.3 [ 18s] [60/96] cumulate bzip2-1.0.8-1.4 [ 18s] [61/96] cumulate libfdisk-2.39.3-1.3 [ 18s] [62/96] cumulate libmagic-5.45-1.3 [ 18s] [63/96] cumulate libxml2-2.12.5-1.5 [ 18s] [64/96] cumulate perl-5.38.0-1.4 [ 18s] [65/96] cumulate xz-5.4.5-1.6 [ 18s] [66/96] cumulate build-mkbaselibs-20120927-1.1 [ 18s] [67/96] cumulate linux-glibc-devel-5.4-1.5 [ 18s] [68/96] cumulate terminfo-base-full-6.4-1.6 [ 18s] [69/96] cumulate autoconf-2.71-1.6 [ 18s] [70/96] cumulate file-5.45-1.3 [ 18s] [71/96] cumulate glibc-locale-2.30-1.6 [ 18s] [72/96] cumulate tar-1.17-3.1 [ 18s] [73/96] cumulate gzip-1.3.12-1.3 [ 18s] [74/96] cumulate pam-1.1.6-1.5 [ 18s] [75/96] cumulate tzdata-2023c-1.1 [ 18s] [76/96] cumulate libdw-0.189-1.6 [ 18s] [77/96] cumulate libarchive-3.7.2-1.5 [ 18s] [78/96] cumulate gcc-9.2.0-1.6 [ 18s] [79/96] cumulate glibc-devel-2.30-1.6 [ 18s] [80/96] cumulate qemu-accel-x86_64-armv7hl-0.4-1.1 [ 18s] [81/96] cumulate automake-1.16.5-1.6 [ 18s] [82/96] cumulate libasm-0.189-1.6 [ 18s] [83/96] cumulate libncurses6-6.4-1.6 [ 18s] [84/96] cumulate build-20120927-1.1 [ 18s] [85/96] cumulate libncurses-6.4-1.6 [ 18s] [86/96] cumulate less-643-2.1 [ 18s] [87/96] cumulate libreadline-5.2-1.5 [ 18s] [88/96] cumulate zlib-devel-1.3-1.5 [ 18s] [89/96] cumulate libtool-2.4.7-1.6 [ 18s] [90/96] cumulate elfutils-0.189-1.6 [ 18s] [91/96] cumulate util-linux-2.39.3-1.3 [ 18s] [92/96] cumulate util-linux-su-2.39.3-1.3 [ 18s] [93/96] cumulate nss-3.98-1.6 [ 18s] [94/96] cumulate libsoftokn3-3.98-1.6 [ 18s] [95/96] cumulate rpm-4.14.1.1-1.6 [ 18s] [96/96] cumulate rpm-build-4.14.1.1-1.6 [ 18s] now installing cumulated packages [ 19s] Preparing... ######################################## [ 19s] Updating / installing... [ 19s] setup-0.9-1.35 ######################################## [ 19s] filesystem-3.1-1.1 ######################################## [ 19s] libmagic-data-5.45-1.3 ######################################## [ 19s] glibc-2.30-1.6 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 20s] ######################################## [ 20s] libgcc-9.2.0-1.6 ######################################## [ 20s] bash-3.2.57-1.1 ######################################## [ 20s] zlib-1.3-1.5 ######################################## [ 22s] coreutils-6.9-17.8 ######################################## [ 22s] libstdc++-9.2.0-1.6 ######################################## [ 22s] libbz2-1.0.8-1.4 ######################################## [ 22s] liblzma-5.4.5-1.6 ######################################## [ 23s] libelf-0.189-1.6 ######################################## [ 23s] libdw-0.189-1.6 ######################################## [ 23s] libmagic-5.45-1.3 ######################################## [ 23s] libblkid-2.39.3-1.3 ######################################## [ 24s] nspr-4.35-1.3 ######################################## [ 24s] binutils-2.33.1-1.6 ######################################## [ 24s] pam-1.1.6-1.5 ######################################## [ 25s] libcap-2.69-1.5 ######################################## [ 25s] libfreebl3-3.98-1.6 ######################################## [ 26s] liblua-5.1.5-1.3 ######################################## [ 26s] libpopt-1.16-1.3 ######################################## [ 26s] libuuid-2.39.3-1.3 ######################################## [ 26s] libzstd1-1.5.5-1.4 ######################################## [ 27s] linux-glibc-devel-5.4-1.5 ######################################## [ 28s] terminfo-base-full-6.4-1.6 ######################################## [ 28s] libncurses6-6.4-1.6 ######################################## [ 29s] glibc-devel-2.30-1.6 ######################################## [ 29s] libreadline-5.2-1.5 ######################################## [ 29s] libfdisk-2.39.3-1.3 ######################################## [ 29s] nss-certs-3.98-1.6 ######################################## [ 29s] libmount-2.39.3-1.3 ######################################## [ 30s] libasm-0.189-1.6 ######################################## [ 30s] libxml2-2.12.5-1.5 ######################################## [ 30s] xz-5.4.5-1.6 ######################################## [ 30s] bzip2-1.0.8-1.4 ######################################## [ 30s] libcc1-9.2.0-1.6 ######################################## [ 30s] libubsan-9.2.0-1.6 ######################################## [ 31s] gzip-1.3.12-1.3 ######################################## [ 31s] make-4.3-1.3 ######################################## [ 31s] findutils-4.3.8-1.3 ######################################## [ 31s] gdbm-1.8.3-1.6 ######################################## [ 36s] perl-5.38.0-1.4 ######################################## [ 36s] build-mkbaselibs-20120927-1.1 ######################################## [ 36s] libattr-2.5.1-1.3 ######################################## [ 36s] libacl-2.3.2-1.3 ######################################## [ 36s] tar-1.17-3.1 ######################################## [ 36s] libgfortran-9.2.0-1.6 ######################################## [ 37s] libgomp-9.2.0-1.6 ######################################## [ 37s] libitm-9.2.0-1.6 ######################################## [ 37s] libltdl-2.4.7-1.6 ######################################## [ 38s] libopenssl3-3.0.13-1.6 ######################################## [ 38s] libarchive-3.7.2-1.5 ######################################## [ 38s] libpcre-8.45-1.3 ######################################## [ 39s] libsmack-1.3.1-1.3 ######################################## [ 39s] libsmartcols-2.39.3-1.3 ######################################## [ 39s] libsqlite-3.44.0-1.3 ######################################## [ 40s] libsoftokn3-3.98-1.6 ######################################## [ 40s] nss-3.98-1.6 ######################################## [ 41s] rpm-4.14.1.1-1.6 ######################################## [ 42s] m4-1.4.19-1.1 ######################################## [ 42s] autoconf-2.71-1.6 ######################################## [ 42s] automake-1.16.5-1.6 ######################################## [ 42s] patch-2.7.6-1.3 ######################################## [ 43s] pkg-config-0.29.2-1.5 ######################################## [ 43s] sed-4.1c-1.3 ######################################## [ 43s] util-linux-2.39.3-1.3 ######################################## [ 43s] libatomic-9.2.0-1.6 ######################################## [ 44s] zlib-devel-1.3-1.5 ######################################## [ 44s] libtool-2.4.7-1.6 ######################################## [ 44s] build-20120927-1.1 ######################################## [ 44s] libncurses-6.4-1.6 ######################################## [ 44s] libstdc++-devel-9.2.0-1.6 ######################################## [ 44s] build-compare-2023.06.18-1.1 ######################################## [ 44s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 50s] qemu-linux-user-x86_64-cross-5.2.0-20.######################################## [ 52s] gcc-9.2.0-1.6 ######################################## [ 67s] qemu-accel-x86_64-armv7hl-0.4-1.1 ######################################## [ 67s] rpm-build-4.14.1.1-1.6 ######################################## [ 67s] util-linux-su-2.39.3-1.3 ######################################## [ 68s] smack-1.3.1-1.3 ######################################## [ 68s] grep-2.5.2-1.3 ######################################## [ 68s] elfutils-0.189-1.6 ######################################## [ 68s] less-643-2.1 ######################################## [ 68s] file-5.45-1.3 ######################################## [ 68s] glibc-locale-2.30-1.6 ######################################## [ 68s] tzdata-2023c-1.1 ######################################## [ 69s] cpp-9.2.0-1.6 ######################################## [ 70s] gcc-c++-9.2.0-1.6 ######################################## [ 70s] gawk-3.1.5-3.1 ######################################## [ 70s] cpio-2.8-1.1 ######################################## [ 70s] diffutils-3.10-1.1 ######################################## [ 70s] hostname-3.23-1.1 ######################################## [ 70s] net-tools-2.0_20121208git-1.3 ######################################## [ 70s] update-alternatives-1.22.2-3.1 ######################################## [ 70s] which-2.17-2.1 ######################################## [ 70s] now finalizing build dir... [ 71s] ----------------------------------------------------------------- [ 71s] I have the following modifications for perl-PerlIO-gzip.spec: [ 71s] 4c4 [ 71s] < Release: 1 [ 71s] --- [ 71s] > Release: 1.1 [ 72s] build target is armv7hl-tizen-linux [ 72s] ----------------------------------------------------------------- [ 72s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 72s] ----------------------------------------------------------------- [ 72s] ----------------------------------------------------------------- [ 72s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7hl-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-9.0-Base/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 75s] Building target platforms: armv7hl-tizen-linux [ 75s] Building for target armv7hl-tizen-linux [ 75s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.oNGKxC [ 75s] + umask 022 [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + cd /home/abuild/rpmbuild/BUILD [ 75s] + rm -rf perl-PerlIO-gzip-0.20 [ 75s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 75s] + /bin/tar -xof - [ 75s] + STATUS=0 [ 75s] + '[' 0 -ne 0 ']' [ 75s] + cd perl-PerlIO-gzip-0.20 [ 75s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 76s] + exit 0 [ 76s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.9yfT0A [ 76s] + umask 022 [ 76s] + cd /home/abuild/rpmbuild/BUILD [ 76s] + cd perl-PerlIO-gzip-0.20 [ 76s] + ref=/usr/lib/rpm [ 76s] + mints=0 [ 76s] + case $(uname -m) in [ 76s] ++ uname -m [ 76s] + for s in guess sub [ 76s] ++ find -maxdepth 8 -name config.guess [ 76s] + for s in guess sub [ 76s] ++ find -maxdepth 8 -name config.sub [ 76s] + LANG=C [ 76s] + export LANG [ 76s] + unset DISPLAY [ 76s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 76s] + export CFLAGS [ 76s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g' [ 76s] + export CXXFLAGS [ 76s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -I%_fmoddir' [ 76s] + export FFLAGS [ 76s] + LDFLAGS= [ 76s] + export LDFLAGS [ 76s] + perl Makefile.PL [ 77s] Checking if your kit is complete... [ 77s] Looks good [ 78s] Generating a Unix-style Makefile [ 78s] Writing Makefile for PerlIO::gzip [ 78s] Writing MYMETA.yml and MYMETA.json [ 78s] + make [ 81s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 81s] Running Mkbootstrap for gzip () [ 81s] chmod 644 "gzip.bs" [ 81s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 82s] "/usr/bin/perl" "/usr/lib/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 83s] mv gzip.xsc gzip.c [ 83s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE" gzip.c [ 83s] In file included from gzip.xs:13: [ 83s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:1059: warning: "PERL_USE_SAFE_PUTENV" redefined [ 83s] 1059 | #define PERL_USE_SAFE_PUTENV [ 83s] | [ 83s] : note: this is the location of the previous definition [ 83s] In file included from /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/perl.h:6227, [ 83s] from gzip.xs:13: [ 83s] gzip.xs: In function 'PerlIOGzip_getarg': [ 83s] /usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized in this function [-Wmaybe-uninitialized] [ 83s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 83s] | ^~~~~~~~~~~~ [ 83s] gzip.xs:675:24: note: 'mode' was declared here [ 83s] 675 | register const char *mode; [ 83s] | ^~~~ [ 83s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 83s] LD_RUN_PATH="/usr/lib" cc -shared -O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=hard -mthumb -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 83s] -lz \ [ 83s] [ 83s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 84s] Manifying 1 pod document [ 84s] + exit 0 [ 84s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.ajSwoC [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd perl-PerlIO-gzip-0.20 [ 84s] + LANG=C [ 84s] + export LANG [ 84s] + unset DISPLAY [ 84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 84s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 84s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 84s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm install_vendor [ 84s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 85s] Manifying 1 pod document [ 86s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 86s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 86s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 86s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man/man3/PerlIO::gzip.3 [ 86s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/info [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/packages [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc/perl-PerlIO-gzip-0.20 [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/gtk-doc [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/doc [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 87s] + xargs rm -f -- [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 87s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 87s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto -name .packlist -print0 [ 87s] + xargs -0 -r rm [ 87s] + '[' armv7hl == noarch ']' [ 87s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/5.38.0/armv7l-linux-thread-multi/perllocal.pod [ 87s] + FILES=perl-PerlIO-gzip.files [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 87s] + RES= [ 87s] + '[' -n '' ']' [ 87s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ -type d [ 87s] ++ sort [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] + continue [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 87s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 87s] + el=armv7l-linux-thread-multi [ 87s] + all_dir=(${all_dir[@]} $el) [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 87s] + el=armv7l-linux-thread-multi/PerlIO [ 87s] + all_dir=(${all_dir[@]} $el) [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto [ 87s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 87s] + el=armv7l-linux-thread-multi/auto [ 87s] + all_dir=(${all_dir[@]} $el) [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 87s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 87s] + el=armv7l-linux-thread-multi/auto/PerlIO [ 87s] + all_dir=(${all_dir[@]} $el) [ 87s] + for dir in '`find ${base_dir} -type d | sort`' [ 87s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ ']' [ 87s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 87s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/ '{print $2}' [ 87s] + el=armv7l-linux-thread-multi/auto/PerlIO/gzip [ 87s] + all_dir=(${all_dir[@]} $el) [ 87s] + for i in '${all_dir[@]}' [ 87s] + '[' armv7l-linux-thread-multi = auto ']' [ 87s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi ']' [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi -maxdepth 1 -type f [ 87s] + RES= [ 87s] + '[' -n '' ']' [ 87s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi [ 87s] + /bin/cat [ 87s] + for i in '${all_dir[@]}' [ 87s] + '[' armv7l-linux-thread-multi/PerlIO = auto ']' [ 87s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO ']' [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 87s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 87s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm ']' [ 87s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO [ 87s] + /bin/cat [ 87s] + for file in '$RES' [ 87s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/PerlIO/gzip.pm [ 87s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/PerlIO/gzip.pm [ 87s] + /bin/cat [ 87s] + for i in '${all_dir[@]}' [ 87s] + '[' armv7l-linux-thread-multi/auto = auto ']' [ 87s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 87s] + continue [ 87s] + for i in '${all_dir[@]}' [ 87s] + '[' armv7l-linux-thread-multi/auto/PerlIO = auto ']' [ 87s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO ']' [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 87s] + RES= [ 87s] + '[' -n '' ']' [ 87s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO [ 87s] + /bin/cat [ 87s] + for i in '${all_dir[@]}' [ 87s] + '[' armv7l-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 87s] + '[' /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip = /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto ']' [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip ']' [ 87s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 87s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 87s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 87s] + fgen_dir /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip [ 87s] + /bin/cat [ 87s] + for file in '$RES' [ 87s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0//armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 87s] + fgen_file /usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 87s] + /bin/cat [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/share/man ']' [ 87s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 87s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/bin ']' [ 87s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 88s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm/usr/lib/perl5/vendor_perl/5.38.0/armv7l-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 88s] 158 blocks [ 88s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 88s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 88s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 88s] + /usr/lib/rpm/brp-python-hardlink [ 88s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 88s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 88s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 88s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 88s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 98s] Processing files: perl-PerlIO-gzip-0.20-1.1.armv7hl [ 99s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(armv7hl-32) = 0.20-1.1 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Requires: ld-linux-armhf.so.3 ld-linux-armhf.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 rtld(GNU_HASH) [ 99s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.armv7hl [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.1 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7hl [ 99s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 99s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 99s] [ 99s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(armv7hl-32) = 0.20-1.1 [ 99s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 99s] Recommends: perl-PerlIO-gzip-debugsource(armv7hl-32) = 0.20-1.1 [ 99s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 99s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 99s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-0.20-1.1.armv7hl.rpm [ 99s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debugsource-0.20-1.1.armv7hl.rpm [ 100s] Wrote: /home/abuild/rpmbuild/RPMS/armv7hl/perl-PerlIO-gzip-debuginfo-0.20-1.1.armv7hl.rpm [ 100s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.mDDbYB [ 100s] + umask 022 [ 100s] + cd /home/abuild/rpmbuild/BUILD [ 100s] + cd perl-PerlIO-gzip-0.20 [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 100s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.arm [ 100s] + exit 0 [ 100s] ... checking for files with abuild user/group [ 100s] ... creating baselibs [ 101s] [ 101s] 7ecdb9b085e4 finished "build perl-PerlIO-gzip.spec" at Fri Oct 25 08:45:38 UTC 2024. [ 101s] Retried build at Tue Nov 26 13:47:22 2024 returned same result, skipped