[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4 [ 0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386 [ 0s] [ 0s] [ 0s] 763f3fd73db9 started "build gtk-doc.spec" at Fri Oct 6 05:01:29 UTC 2023. [ 0s] [ 0s] Building gtk-doc for project 'Tizen-Base-ASAN' repository 'standard' arch 'x86_64' srcmd5 'b4f14cadd1338b1a2d43df612b5ef79f' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/gtk-doc.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/gtk-doc.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/4/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.4/.build-srcdir/gtk-doc.spec build ... [ 2s] cycle: nss -> libsoftokn3 [ 2s] breaking dependency nss -> libsoftokn3 [ 2s] [1/41] preinstalling libmagic-data... [ 2s] [2/41] preinstalling libncurses... [ 2s] [3/41] preinstalling setup... [ 2s] [4/41] preinstalling filesystem... [ 2s] [5/41] preinstalling glibc... [ 2s] [6/41] preinstalling libgcc... [ 2s] [7/41] preinstalling libstdc++... [ 2s] [8/41] preinstalling libasan... [ 2s] [9/41] preinstalling bash... [ 2s] [10/41] preinstalling findutils... [ 2s] [11/41] preinstalling grep... [ 2s] [12/41] preinstalling libattr... [ 2s] [13/41] preinstalling libbz2... [ 2s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 3s] [16/41] preinstalling liblua... [ 3s] [17/41] preinstalling liblzma... [ 3s] [18/41] preinstalling libpopt... [ 3s] [19/41] preinstalling libreadline... [ 3s] [20/41] preinstalling libsmack... [ 3s] [21/41] preinstalling libzstd1... [ 3s] [22/41] preinstalling nspr... [ 3s] [23/41] preinstalling sed... [ 3s] [24/41] preinstalling zlib... [ 3s] [25/41] preinstalling diffutils... [ 3s] [26/41] preinstalling libsqlite... [ 3s] [27/41] preinstalling asan-build-env... [ 3s] [28/41] preinstalling libacl... [ 3s] [29/41] preinstalling libelf... [ 3s] [30/41] preinstalling smack... [ 3s] [31/41] preinstalling bzip2... [ 3s] [32/41] preinstalling coreutils... [ 3s] [33/41] preinstalling libmagic... [ 3s] [34/41] preinstalling libxml2... [ 3s] [35/41] preinstalling util-linux... [ 3s] [36/41] preinstalling tar... [ 4s] [37/41] preinstalling util-linux-su... [ 4s] [38/41] preinstalling nss... [ 4s] [39/41] preinstalling libsoftokn3... [ 4s] [40/41] preinstalling rpm... [ 5s] [41/41] preinstalling asan-force-options... [ 5s] running setup postinstall script [ 5s] chroot: failed to run command '': No such file or directory [ 5s] running asan-force-options postinstall script [ 5s] /usr/bin [ 5s] grep: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory [ 5s] initializing rpm db... [ 5s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 5s] breaking dependency libasan -> glibc [ 5s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 5s] breaking dependency libasan -> libgcc [ 5s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 5s] breaking dependency libstdc++ -> glibc [ 5s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 5s] breaking dependency setup -> asan-runtime-env [ 5s] cycle: nss -> libsoftokn3 [ 5s] breaking dependency nss -> libsoftokn3 [ 5s] done [ 5s] querying package ids... [ 6s] [1/120] cumulate libmagic-data-5.44-1.20 [ 6s] [2/120] cumulate setup-0.9-1.7 [ 6s] [3/120] cumulate filesystem-3.1-1.2 [ 6s] [4/120] cumulate glibc-2.30-1.18 [ 6s] [5/120] cumulate libatomic-9.2.0-1.17 [ 6s] [6/120] cumulate libgcc-9.2.0-1.17 [ 6s] [7/120] cumulate libgomp-9.2.0-1.17 [ 6s] [8/120] cumulate libitm-9.2.0-1.17 [ 6s] [9/120] cumulate libquadmath-9.2.0-1.17 [ 6s] [10/120] cumulate libstdc++-9.2.0-1.17 [ 6s] [11/120] cumulate libgfortran-9.2.0-1.17 [ 6s] [12/120] cumulate libstdc++-devel-9.2.0-1.17 [ 6s] [13/120] cumulate binutils-2.33.1-1.21 [ 6s] [14/120] cumulate libasan-9.2.0-1.17 [ 6s] [15/120] cumulate libcc1-9.2.0-1.17 [ 6s] [16/120] cumulate libubsan-9.2.0-1.17 [ 6s] [17/120] cumulate asan-runtime-env-9.2.0-2.11 [ 6s] [18/120] cumulate bash-3.2.57-1.10 [ 6s] [19/120] cumulate cpio-2.8-1.3 [ 6s] [20/120] cumulate findutils-4.3.8-1.20 [ 6s] [21/120] cumulate gdbm-1.8.3-1.22 [ 6s] [22/120] cumulate hostname-3.23-1.3 [ 6s] [23/120] cumulate libattr-2.5.1-1.21 [ 6s] [24/120] cumulate libblkid-2.37.4-1.7 [ 6s] [25/120] cumulate libbz2-1.0.8-1.21 [ 6s] [26/120] cumulate libcap-2.24-1.20 [ 6s] [27/120] cumulate libext2fs-1.46.0-1.21 [ 6s] [28/120] cumulate libffi-3.4.2-1.22 [ 6s] [29/120] cumulate libfreebl3-3.87-2.7 [ 6s] [30/120] cumulate libgpg-error-1.46-1.3 [ 6s] [31/120] cumulate libltdl-2.4.7-1.24 [ 6s] [32/120] cumulate liblua-5.1.5-1.20 [ 6s] [33/120] cumulate liblzma-5.4.0-1.23 [ 6s] [34/120] cumulate libpcre-8.45-1.10 [ 6s] [35/120] cumulate libpopt-1.16-1.20 [ 6s] [36/120] cumulate libpython-2.7.18-1.22 [ 6s] [37/120] cumulate libpython3_111_0-3.11.2-1.17 [ 6s] [38/120] cumulate libsmack-1.3.1-1.20 [ 6s] [39/120] cumulate libsmartcols-2.37.4-1.7 [ 6s] [40/120] cumulate libuuid-2.37.4-1.7 [ 6s] [41/120] cumulate libzstd1-1.5.2-1.20 [ 6s] [42/120] cumulate m4-1.4.19-1.3 [ 6s] [43/120] cumulate net-tools-2.0_20121208git-1.3 [ 6s] [44/120] cumulate nspr-4.35-1.20 [ 6s] [45/120] cumulate patch-2.7.6-1.20 [ 6s] [46/120] cumulate pkg-config-0.29.2-1.22 [ 6s] [47/120] cumulate sed-4.1c-1.3 [ 6s] [48/120] cumulate update-alternatives-1.21.18-1.3 [ 6s] [49/120] cumulate which-2.17-1.3 [ 6s] [50/120] cumulate zlib-1.2.13-1.22 [ 6s] [51/120] cumulate diffutils-3.8-1.3 [ 6s] [52/120] cumulate libexpat-2.4.1-1.22 [ 6s] [53/120] cumulate libopenssl11-1.1.1u-1.22 [ 6s] [54/120] cumulate libsqlite-3.40.1-1.21 [ 6s] [55/120] cumulate db4-4.8.30.NC-1.22 [ 6s] [56/120] cumulate build-compare-2015.04.28-1.13 [ 6s] [57/120] cumulate asan-build-env-9.2.0-2.11 [ 6s] [58/120] cumulate cpp-9.2.0-1.17 [ 6s] [59/120] cumulate gcc-c++-9.2.0-1.17 [ 6s] [60/120] cumulate gawk-3.1.5-1.3 [ 6s] [61/120] cumulate grep-2.5.2-1.3 [ 6s] [62/120] cumulate libacl-2.2.53-1.21 [ 6s] [63/120] cumulate libelf-0.189-1.22 [ 6s] [64/120] cumulate libmount-2.37.4-1.7 [ 6s] [65/120] cumulate nss-certs-3.87-2.7 [ 6s] [66/120] cumulate smack-1.3.1-1.20 [ 6s] [67/120] cumulate bzip2-1.0.8-1.21 [ 6s] [68/120] cumulate coreutils-6.9-14.13 [ 6s] [69/120] cumulate libfdisk-2.37.4-1.7 [ 6s] [70/120] cumulate libgcrypt-1.10.1-1.3 [ 6s] [71/120] cumulate libmagic-5.44-1.20 [ 6s] [72/120] cumulate libxml2-2.10.2-1.22 [ 6s] [73/120] cumulate make-4.3-1.22 [ 6s] [74/120] cumulate xz-5.4.0-1.23 [ 6s] [75/120] cumulate gettext-runtime-0.21.1-2.23 [ 6s] [76/120] cumulate perl-5.34.0-1.20 [ 6s] [77/120] cumulate gcc-9.2.0-1.17 [ 6s] [78/120] cumulate build-mkbaselibs-20120927-1.2 [ 6s] [79/120] cumulate linux-glibc-devel-3.10-1.22 [ 6s] [80/120] cumulate terminfo-base-full-6.2-1.23 [ 6s] [81/120] cumulate autoconf-2.71-1.23 [ 6s] [82/120] cumulate file-5.44-1.20 [ 6s] [83/120] cumulate glibc-locale-2.30-1.18 [ 6s] [84/120] cumulate tar-1.17-1.3 [ 6s] [85/120] cumulate gzip-1.3.12-1.20 [ 6s] [86/120] cumulate pam-1.1.6-1.2 [ 6s] [87/120] cumulate tzdata-2023c-1.3 [ 6s] [88/120] cumulate libdw-0.189-1.22 [ 6s] [89/120] cumulate libxslt-1.1.37-1.3 [ 6s] [90/120] cumulate nss-3.87-2.7 [ 6s] [91/120] cumulate libarchive-3.6.2-1.22 [ 6s] [92/120] cumulate glibc-devel-2.30-1.18 [ 6s] [93/120] cumulate automake-1.16.5-1.24 [ 6s] [94/120] cumulate libasm-0.189-1.22 [ 6s] [95/120] cumulate libxslt-tools-1.1.37-1.3 [ 6s] [96/120] cumulate build-20120927-1.2 [ 6s] [97/120] cumulate libncurses6-6.2-1.23 [ 6s] [98/120] cumulate libsoftokn3-3.87-2.7 [ 6s] [99/120] cumulate rpm-4.14.1.1-1.21 [ 6s] [100/120] cumulate libncurses-6.2-1.23 [ 6s] [101/120] cumulate less-608-1.3 [ 6s] [102/120] cumulate libreadline-5.2-1.22 [ 6s] [103/120] cumulate asan-force-options-9.2.0-2.11 [ 6s] [104/120] cumulate procps-ng-3.3.17-1.3 [ 6s] [105/120] cumulate libtool-2.4.7-1.24 [ 6s] [106/120] cumulate elfutils-0.189-1.22 [ 6s] [107/120] cumulate rpm-build-4.14.1.1-1.21 [ 6s] [108/120] cumulate libxml2-tools-2.10.2-1.22 [ 6s] [109/120] cumulate python-2.7.18-1.22 [ 6s] [110/120] cumulate python3-base-3.11.2-1.17 [ 6s] [111/120] cumulate util-linux-2.37.4-1.7 [ 6s] [112/120] cumulate sgml-skel-0.7.1-1.2 [ 6s] [113/120] cumulate util-linux-su-2.37.4-1.7 [ 6s] [114/120] cumulate python-libxml2-2.10.2-1.3 [ 6s] [115/120] cumulate gettext-tools-0.21.1-2.23 [ 6s] [116/120] cumulate iso_ent-2000.11.03-1.2 [ 6s] [117/120] cumulate itstool-2.0.7-1.2 [ 6s] [118/120] cumulate xmlcharent-0.3-405.2 [ 6s] [119/120] cumulate docbook_4-4.5-1.2 [ 6s] [120/120] cumulate docbook-xsl-stylesheets-1.79.2-1.2 [ 6s] now installing cumulated packages [ 7s] Preparing... ######################################## [ 7s] Updating / installing... [ 7s] asan-runtime-env-9.2.0-2.11 ######################################## [ 7s] setup-0.9-1.7 ######################################## [ 7s] filesystem-3.1-1.2 ######################################## [ 7s] glibc-2.30-1.18 ######################################## [ 8s] libgcc-9.2.0-1.17 ######################################## [ 8s] libstdc++-9.2.0-1.17 ######################################## [ 8s] libasan-9.2.0-1.17 ######################################## [ 8s] bash-3.2.57-1.10 ######################################## [ 8s] zlib-1.2.13-1.22 ######################################## [ 8s] liblzma-5.4.0-1.23 ######################################## [ 8s] coreutils-6.9-14.13 ######################################## [ 8s] libxml2-2.10.2-1.22 ######################################## [ 9s] libbz2-1.0.8-1.21 ######################################## [ 9s] libelf-0.189-1.22 ######################################## [ 9s] libdw-0.189-1.22 ######################################## [ 9s] gawk-3.1.5-1.3 ######################################## [ 9s] libblkid-2.37.4-1.7 ######################################## [ 9s] nspr-4.35-1.20 ######################################## [ 9s] sed-4.1c-1.3 ######################################## [ 9s] libopenssl11-1.1.1u-1.22 ######################################## [ 10s] libsqlite-3.40.1-1.21 ######################################## [ 10s] pam-1.1.6-1.2 ######################################## [ 10s] gdbm-1.8.3-1.22 ######################################## [ 11s] perl-5.34.0-1.20 ######################################## [ 12s] libcap-2.24-1.20 ######################################## [ 12s] libfreebl3-3.87-2.7 ######################################## [ 12s] libgpg-error-1.46-1.3 ######################################## [ 12s] liblua-5.1.5-1.20 ######################################## [ 12s] libpopt-1.16-1.20 ######################################## [ 13s] libpython-2.7.18-1.22 ######################################## [ 13s] libuuid-2.37.4-1.7 ######################################## [ 13s] libzstd1-1.5.2-1.20 ######################################## [ 13s] binutils-2.33.1-1.21 ######################################## [ 13s] libquadmath-9.2.0-1.17 ######################################## [ 14s] libgfortran-9.2.0-1.17 ######################################## [ 14s] libfdisk-2.37.4-1.7 ######################################## [ 14s] libgcrypt-1.10.1-1.3 ######################################## [ 14s] libxslt-1.1.37-1.3 ######################################## [ 14s] build-mkbaselibs-20120927-1.2 ######################################## [ 14s] nss-certs-3.87-2.7 ######################################## [ 14s] libsoftokn3-3.87-2.7 ######################################## [ 15s] nss-3.87-2.7 ######################################## [ 15s] libmount-2.37.4-1.7 ######################################## [ 15s] libasm-0.189-1.22 ######################################## [ 15s] bzip2-1.0.8-1.21 ######################################## [ 15s] linux-glibc-devel-3.10-1.22 ######################################## [ 15s] glibc-devel-2.30-1.18 ######################################## [ 15s] terminfo-base-full-6.2-1.23 ######################################## [ 16s] libncurses6-6.2-1.23 ######################################## [ 16s] libreadline-5.2-1.22 ######################################## [ 16s] libxml2-tools-2.10.2-1.22 ######################################## [ 16s] sgml-skel-0.7.1-1.2 ######################################## [ 16s] iso_ent-2000.11.03-1.2 ######################################## [ 16s] gzip-1.3.12-1.20 ######################################## [ 16s] xz-5.4.0-1.23 ######################################## [ 16s] make-4.3-1.22 ######################################## [ 16s] gettext-runtime-0.21.1-2.23 ######################################## [ 17s] findutils-4.3.8-1.20 ######################################## [ 17s] libattr-2.5.1-1.21 ######################################## [ 17s] libacl-2.2.53-1.21 ######################################## [ 17s] tar-1.17-1.3 ######################################## [ 17s] libarchive-3.6.2-1.22 ######################################## [ 17s] libffi-3.4.2-1.22 ######################################## [ 17s] libltdl-2.4.7-1.24 ######################################## [ 17s] libpcre-8.45-1.10 ######################################## [ 18s] grep-2.5.2-1.3 ######################################## [ 18s] xmlcharent-0.3-405.2 ######################################## [ 18s] docbook_4-4.5-1.2 ######################################## [ 19s] libpython3_111_0-3.11.2-1.17 ######################################## [ 19s] libsmack-1.3.1-1.20 ######################################## [ 19s] libsmartcols-2.37.4-1.7 ######################################## [ 20s] util-linux-2.37.4-1.7 ######################################## [ 20s] m4-1.4.19-1.3 ######################################## [ 20s] autoconf-2.71-1.23 ######################################## [ 20s] automake-1.16.5-1.24 ######################################## [ 20s] patch-2.7.6-1.20 ######################################## [ 20s] libexpat-2.4.1-1.22 ######################################## [ 21s] db4-4.8.30.NC-1.22 ######################################## [ 21s] python-2.7.18-1.22 ######################################## [ 22s] python-libxml2-2.10.2-1.3 ######################################## [ 22s] libcc1-9.2.0-1.17 ######################################## [ 22s] libubsan-9.2.0-1.17 ######################################## [ 22s] libatomic-9.2.0-1.17 ######################################## [ 22s] libgomp-9.2.0-1.17 ######################################## [ 22s] libitm-9.2.0-1.17 ######################################## [ 23s] gcc-9.2.0-1.17 ######################################## [ 23s] libmagic-data-5.44-1.20 ######################################## [ 23s] libmagic-5.44-1.20 ######################################## [ 24s] rpm-4.14.1.1-1.21 ######################################## [ 24s] asan-force-options-9.2.0-2.11 ######################################## [ 24s] /usr/bin [ 24s] rpm-build-4.14.1.1-1.21 ######################################## [ 24s] file-5.44-1.20 ######################################## [ 24s] itstool-2.0.7-1.2 ######################################## [ 24s] gettext-tools-0.21.1-2.23 ######################################## [ 25s] docbook-xsl-stylesheets-1.79.2-1.2 ######################################## [ 26s] python3-base-3.11.2-1.17 ######################################## [ 26s] libtool-2.4.7-1.24 ######################################## [ 26s] util-linux-su-2.37.4-1.7 ######################################## [ 26s] smack-1.3.1-1.20 ######################################## [ 26s] build-20120927-1.2 ######################################## [ 26s] libncurses-6.2-1.23 ######################################## [ 26s] less-608-1.3 ######################################## [ 26s] procps-ng-3.3.17-1.3 ######################################## [ 26s] elfutils-0.189-1.22 ######################################## [ 26s] libxslt-tools-1.1.37-1.3 ######################################## [ 26s] glibc-locale-2.30-1.18 ######################################## [ 26s] tzdata-2023c-1.3 ######################################## [ 27s] cpp-9.2.0-1.17 ######################################## [ 27s] gcc-c++-9.2.0-1.17 ######################################## [ 27s] build-compare-2015.04.28-1.13 ######################################## [ 27s] asan-build-env-9.2.0-2.11 ######################################## [ 27s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 27s] cpio-2.8-1.3 ######################################## [ 27s] hostname-3.23-1.3 ######################################## [ 27s] libext2fs-1.46.0-1.21 ######################################## [ 27s] net-tools-2.0_20121208git-1.3 ######################################## [ 27s] pkg-config-0.29.2-1.22 ######################################## [ 27s] update-alternatives-1.21.18-1.3 ######################################## [ 27s] which-2.17-1.3 ######################################## [ 27s] diffutils-3.8-1.3 ######################################## [ 28s] libstdc++-devel-9.2.0-1.17 ######################################## [ 28s] now finalizing build dir... [ 29s] ----------------------------------------------------------------- [ 29s] I have the following modifications for gtk-doc.spec: [ 29s] 4c4 [ 29s] < Release: 0 [ 29s] --- [ 29s] > Release: 1.2 [ 29s] 17c17 [ 29s] < BuildRequires: gettext [ 29s] --- [ 29s] > BuildRequires: gettext-tools [ 29s] ----------------------------------------------------------------- [ 29s] ----- building gtk-doc.spec (user abuild) [ 29s] ----------------------------------------------------------------- [ 29s] ----------------------------------------------------------------- [ 29s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc' /home/abuild/rpmbuild/SOURCES/gtk-doc.spec [ 29s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.krxWyX [ 29s] + umask 022 [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + cd /home/abuild/rpmbuild/BUILD [ 29s] + rm -rf gtk-doc-1.33.2 [ 29s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gtk-doc-1.33.2.tar.xz [ 29s] + /bin/tar -xof - [ 30s] + STATUS=0 [ 30s] + '[' 0 -ne 0 ']' [ 30s] + cd gtk-doc-1.33.2 [ 30s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 30s] + exit 0 [ 30s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.jnWXAV [ 30s] + umask 022 [ 30s] + cd /home/abuild/rpmbuild/BUILD [ 30s] + cd gtk-doc-1.33.2 [ 30s] ++ uname -m [ 30s] + [[ x86_64 == \a\a\r\c\h\6\4 ]] [ 30s] + LANG=C [ 30s] + export LANG [ 30s] + unset DISPLAY [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + LDFLAGS= [ 30s] + export LDFLAGS [ 30s] + AR=gcc-ar [ 30s] + export AR [ 30s] + NM=/bin/nm [ 30s] + export NM [ 30s] + RANLIB=gcc-ranlib [ 30s] + export RANLIB [ 30s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 30s] + export CFLAGS [ 30s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 30s] + export CXXFLAGS [ 30s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 30s] + export FFLAGS [ 30s] + ./autogen.sh --build=x86_64-tizen-linux-gnu --host=x86_64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 30s] autoreconf: export WARNINGS= [ 30s] autoreconf: Entering directory '.' [ 30s] autoreconf: configure.ac: not using Gettext [ 31s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 35s] autoreconf: configure.ac: tracing [ 37s] autoreconf: configure.ac: creating directory build-aux [ 37s] autoreconf: running: libtoolize --copy --force [ 38s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 38s] libtoolize: copying file 'build-aux/ltmain.sh' [ 38s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 38s] libtoolize: copying file 'm4/libtool.m4' [ 38s] libtoolize: copying file 'm4/ltoptions.m4' [ 38s] libtoolize: copying file 'm4/ltsugar.m4' [ 39s] libtoolize: copying file 'm4/ltversion.m4' [ 39s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 39s] autoreconf: configure.ac: not using Intltool [ 39s] autoreconf: configure.ac: not using Gtkdoc [ 39s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 42s] autoreconf: running: /usr/bin/autoconf --force [ 44s] autoreconf: configure.ac: not using Autoheader [ 44s] autoreconf: running: automake --add-missing --copy --force-missing [ 46s] configure.ac:23: installing 'build-aux/compile' [ 46s] configure.ac:27: installing 'build-aux/config.guess' [ 46s] configure.ac:27: installing 'build-aux/config.sub' [ 46s] configure.ac:14: installing 'build-aux/install-sh' [ 46s] configure.ac:14: installing 'build-aux/missing' [ 47s] Makefile.am: installing './INSTALL' [ 47s] parallel-tests: installing 'build-aux/test-driver' [ 47s] tests/annotations/src/Makefile.am: installing 'build-aux/depcomp' [ 48s] autoreconf: Leaving directory '.' [ 50s] checking for a BSD-compatible install... /bin/install -c [ 50s] checking whether build environment is sane... yes [ 50s] checking for a race-free mkdir -p... /bin/mkdir -p [ 50s] checking for gawk... gawk [ 50s] checking whether make sets $(MAKE)... yes [ 50s] checking whether make supports nested variables... yes [ 50s] checking whether UID '399' is supported by ustar format... yes [ 50s] checking whether GID '399' is supported by ustar format... yes [ 50s] checking how to create a ustar tar archive... gnutar [ 50s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 50s] checking whether make supports nested variables... (cached) yes [ 50s] checking for x86_64-tizen-linux-gnu-gcc... x86_64-tizen-linux-gnu-gcc [ 51s] checking whether the C compiler works... yes [ 51s] checking for C compiler default output file name... a.out [ 51s] checking for suffix of executables... [ 51s] checking whether we are cross compiling... no [ 51s] checking for suffix of object files... o [ 51s] checking whether the compiler supports GNU C... yes [ 51s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... yes [ 52s] checking for x86_64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 52s] checking whether x86_64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 52s] checking whether make supports the include directive... yes (GNU style) [ 52s] checking dependency style of x86_64-tizen-linux-gnu-gcc... gcc3 [ 52s] checking build system type... x86_64-tizen-linux-gnu [ 52s] checking host system type... x86_64-tizen-linux-gnu [ 52s] checking how to print strings... printf [ 52s] checking for a sed that does not truncate output... /bin/sed [ 52s] checking for grep that handles long lines and -e... /bin/grep [ 52s] checking for egrep... /bin/grep -E [ 52s] checking for fgrep... /bin/grep -F [ 53s] checking for ld used by x86_64-tizen-linux-gnu-gcc... /usr/x86_64-tizen-linux-gnu/bin/ld [ 53s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 53s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 53s] checking the name lister (/bin/nm) interface... BSD nm [ 53s] checking whether ln -s works... yes [ 53s] checking the maximum length of command line arguments... 1572864 [ 53s] checking how to convert x86_64-tizen-linux-gnu file names to x86_64-tizen-linux-gnu format... func_convert_file_noop [ 53s] checking how to convert x86_64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 53s] checking for /usr/x86_64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 53s] checking for x86_64-tizen-linux-gnu-file... no [ 53s] checking for file... file [ 53s] checking for x86_64-tizen-linux-gnu-objdump... no [ 53s] checking for objdump... objdump [ 53s] checking how to recognize dependent libraries... pass_all [ 53s] checking for x86_64-tizen-linux-gnu-dlltool... no [ 53s] checking for dlltool... no [ 53s] checking how to associate runtime and link libraries... printf %s\n [ 53s] checking for x86_64-tizen-linux-gnu-ar... gcc-ar [ 53s] checking for archiver @FILE support... @ [ 53s] checking for x86_64-tizen-linux-gnu-strip... no [ 53s] checking for strip... strip [ 53s] checking for x86_64-tizen-linux-gnu-ranlib... gcc-ranlib [ 53s] checking command to parse /bin/nm output from x86_64-tizen-linux-gnu-gcc object... ok [ 53s] checking for sysroot... no [ 53s] checking for a working dd... /bin/dd [ 53s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 54s] checking for x86_64-tizen-linux-gnu-mt... no [ 54s] checking for mt... no [ 54s] checking if : is a manifest tool... no [ 54s] checking for stdio.h... yes [ 54s] checking for stdlib.h... yes [ 54s] checking for string.h... yes [ 54s] checking for inttypes.h... yes [ 54s] checking for stdint.h... yes [ 55s] checking for strings.h... yes [ 55s] checking for sys/stat.h... yes [ 55s] checking for sys/types.h... yes [ 55s] checking for unistd.h... yes [ 55s] checking for dlfcn.h... yes [ 55s] checking for objdir... .libs [ 56s] checking if x86_64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 56s] checking for x86_64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 56s] checking if x86_64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 56s] checking if x86_64-tizen-linux-gnu-gcc static flag -static works... no [ 56s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 56s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 56s] checking whether the x86_64-tizen-linux-gnu-gcc linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 56s] checking whether -lc should be explicitly linked in... no [ 57s] checking dynamic linker characteristics... GNU/Linux ld.so [ 57s] checking how to hardcode library paths into programs... immediate [ 57s] checking whether stripping libraries is possible... yes [ 57s] checking if libtool supports shared libraries... yes [ 57s] checking whether to build shared libraries... yes [ 57s] checking whether to build static libraries... yes [ 57s] checking for x86_64-tizen-linux-gnu-pkg-config... /bin/x86_64-tizen-linux-gnu-pkg-config [ 57s] checking pkg-config is at least version 0.19... yes [ 57s] checking for a Python interpreter with version >= 3.2... python3 [ 57s] checking for python3... /bin/python3 [ 57s] checking for python3 version... 3.11 [ 57s] checking for python3 platform... linux [ 57s] checking for GNU default python3 prefix... ${prefix} [ 57s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 57s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 57s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages [ 57s] checking for xsltproc... /bin/xsltproc [ 57s] checking for dblatex... no [ 57s] checking for fop... no [ 57s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 57s] checking for XML catalog... /etc/xml/catalog [ 57s] checking for xmlcatalog... /bin/xmlcatalog [ 57s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 57s] checking for DocBook XSL Stylesheets in XML catalog... found [ 57s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 57s] checking whether to enable runtime debugging code... no [ 57s] checking whether date can output nanoseconds... yes [ 57s] checking whether date can format dates... yes [ 57s] checking for yelp-tools... no [ 57s] checking python3 module: "pygments"... no [ 57s] checking that generated files are newer than configure... done [ 57s] configure: creating ./config.status [ 60s] config.status: creating Makefile [ 60s] config.status: creating gtk-doc.pc [ 60s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 60s] config.status: creating buildsystems/autotools/Makefile [ 60s] config.status: creating buildsystems/cmake/Makefile [ 60s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 60s] config.status: creating gtkdoc/config_data.py [ 60s] config.status: creating help/Makefile [ 60s] config.status: creating help/manual/Makefile [ 60s] config.status: creating tests/Makefile [ 61s] config.status: creating tests/annotations/Makefile [ 61s] config.status: creating tests/annotations/src/Makefile [ 61s] config.status: creating tests/annotations/docs/Makefile [ 61s] config.status: creating tests/bugs/Makefile [ 61s] config.status: creating tests/bugs/src/Makefile [ 61s] config.status: creating tests/bugs/docs/Makefile [ 62s] config.status: creating tests/empty/Makefile [ 62s] config.status: creating tests/empty/src/Makefile [ 62s] config.status: creating tests/empty/docs/Makefile [ 62s] config.status: creating tests/fail/Makefile [ 62s] config.status: creating tests/fail/src/Makefile [ 62s] config.status: creating tests/fail/docs/Makefile [ 62s] config.status: creating tests/gobject/Makefile [ 62s] config.status: creating tests/gobject/src/Makefile [ 63s] config.status: creating tests/gobject/docs/Makefile [ 63s] config.status: creating tests/program/Makefile [ 63s] config.status: creating tests/program/src/Makefile [ 63s] config.status: creating tests/program/docs/Makefile [ 63s] config.status: creating tests/repro/Makefile [ 63s] config.status: creating tests/repro/src/Makefile [ 63s] config.status: creating tests/repro/docs/Makefile [ 63s] config.status: creating gtkdoc-check [ 63s] config.status: creating gtkdoc-depscan [ 63s] config.status: creating gtkdoc-fixxref [ 63s] config.status: creating gtkdoc-mkdb [ 63s] config.status: creating gtkdoc-mkhtml [ 64s] config.status: creating gtkdoc-mkhtml2 [ 64s] config.status: creating gtkdoc-mkman [ 64s] config.status: creating gtkdoc-mkpdf [ 64s] config.status: creating gtkdoc-rebase [ 64s] config.status: creating gtkdoc-scan [ 64s] config.status: creating gtkdoc-scangobj [ 64s] config.status: creating buildsystems/autotools/gtkdocize [ 64s] config.status: creating tests/tools.sh [ 64s] config.status: executing depfiles commands [ 65s] config.status: executing libtool commands [ 65s] configure: [ 65s] gtk-doc was configured with the following options: [ 65s] ================================================== [ 65s] configure: PDF support disabled, no dblatex or fop available [ 65s] configure: Skipping regression tests [ 65s] configure: Debug tracing disabled [ 65s] configure: Documentation disabled [ 65s] + AR=gcc-ar [ 65s] + export AR [ 65s] + NM=/bin/nm [ 65s] + export NM [ 65s] + RANLIB=gcc-ranlib [ 65s] + export RANLIB [ 65s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 65s] + export CFLAGS [ 65s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g' [ 65s] + export CXXFLAGS [ 65s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir' [ 65s] + export FFLAGS [ 65s] + ./configure --build=x86_64-tizen-linux-gnu --host=x86_64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-scrollkeeper [ 66s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 66s] checking for a BSD-compatible install... /bin/install -c [ 66s] checking whether build environment is sane... yes [ 66s] checking for a race-free mkdir -p... /bin/mkdir -p [ 66s] checking for gawk... gawk [ 66s] checking whether make sets $(MAKE)... yes [ 66s] checking whether make supports nested variables... yes [ 66s] checking whether UID '399' is supported by ustar format... yes [ 66s] checking whether GID '399' is supported by ustar format... yes [ 66s] checking how to create a ustar tar archive... gnutar [ 66s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 66s] checking whether make supports nested variables... (cached) yes [ 66s] checking for x86_64-tizen-linux-gnu-gcc... x86_64-tizen-linux-gnu-gcc [ 66s] checking whether the C compiler works... yes [ 66s] checking for C compiler default output file name... a.out [ 67s] checking for suffix of executables... [ 67s] checking whether we are cross compiling... no [ 67s] checking for suffix of object files... o [ 67s] checking whether the compiler supports GNU C... yes [ 67s] checking whether x86_64-tizen-linux-gnu-gcc accepts -g... yes [ 67s] checking for x86_64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 67s] checking whether x86_64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 67s] checking whether make supports the include directive... yes (GNU style) [ 67s] checking dependency style of x86_64-tizen-linux-gnu-gcc... gcc3 [ 67s] checking build system type... x86_64-tizen-linux-gnu [ 67s] checking host system type... x86_64-tizen-linux-gnu [ 67s] checking how to print strings... printf [ 67s] checking for a sed that does not truncate output... /bin/sed [ 68s] checking for grep that handles long lines and -e... /bin/grep [ 68s] checking for egrep... /bin/grep -E [ 68s] checking for fgrep... /bin/grep -F [ 68s] checking for ld used by x86_64-tizen-linux-gnu-gcc... /usr/x86_64-tizen-linux-gnu/bin/ld [ 68s] checking if the linker (/usr/x86_64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 68s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 68s] checking the name lister (/bin/nm) interface... BSD nm [ 68s] checking whether ln -s works... yes [ 68s] checking the maximum length of command line arguments... 1572864 [ 68s] checking how to convert x86_64-tizen-linux-gnu file names to x86_64-tizen-linux-gnu format... func_convert_file_noop [ 68s] checking how to convert x86_64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 68s] checking for /usr/x86_64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 68s] checking for x86_64-tizen-linux-gnu-file... no [ 68s] checking for file... file [ 68s] checking for x86_64-tizen-linux-gnu-objdump... no [ 68s] checking for objdump... objdump [ 68s] checking how to recognize dependent libraries... pass_all [ 68s] checking for x86_64-tizen-linux-gnu-dlltool... no [ 68s] checking for dlltool... no [ 68s] checking how to associate runtime and link libraries... printf %s\n [ 68s] checking for x86_64-tizen-linux-gnu-ar... gcc-ar [ 68s] checking for archiver @FILE support... @ [ 68s] checking for x86_64-tizen-linux-gnu-strip... no [ 68s] checking for strip... strip [ 68s] checking for x86_64-tizen-linux-gnu-ranlib... gcc-ranlib [ 68s] checking command to parse /bin/nm output from x86_64-tizen-linux-gnu-gcc object... ok [ 68s] checking for sysroot... no [ 68s] checking for a working dd... /bin/dd [ 68s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 68s] checking for x86_64-tizen-linux-gnu-mt... no [ 68s] checking for mt... no [ 68s] checking if : is a manifest tool... no [ 68s] checking for stdio.h... yes [ 68s] checking for stdlib.h... yes [ 69s] checking for string.h... yes [ 69s] checking for inttypes.h... yes [ 69s] checking for stdint.h... yes [ 69s] checking for strings.h... yes [ 69s] checking for sys/stat.h... yes [ 69s] checking for sys/types.h... yes [ 69s] checking for unistd.h... yes [ 69s] checking for dlfcn.h... yes [ 69s] checking for objdir... .libs [ 70s] checking if x86_64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 70s] checking for x86_64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 70s] checking if x86_64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 70s] checking if x86_64-tizen-linux-gnu-gcc static flag -static works... no [ 70s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 70s] checking if x86_64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 70s] checking whether the x86_64-tizen-linux-gnu-gcc linker (/usr/x86_64-tizen-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes [ 70s] checking whether -lc should be explicitly linked in... no [ 71s] checking dynamic linker characteristics... GNU/Linux ld.so [ 71s] checking how to hardcode library paths into programs... immediate [ 71s] checking whether stripping libraries is possible... yes [ 71s] checking if libtool supports shared libraries... yes [ 71s] checking whether to build shared libraries... yes [ 71s] checking whether to build static libraries... yes [ 71s] checking for x86_64-tizen-linux-gnu-pkg-config... /bin/x86_64-tizen-linux-gnu-pkg-config [ 71s] checking pkg-config is at least version 0.19... yes [ 71s] checking for a Python interpreter with version >= 3.2... python3 [ 71s] checking for python3... /bin/python3 [ 71s] checking for python3 version... 3.11 [ 71s] checking for python3 platform... linux [ 71s] checking for GNU default python3 prefix... ${prefix} [ 71s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 71s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 71s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages [ 71s] checking for xsltproc... /bin/xsltproc [ 71s] checking for dblatex... no [ 71s] checking for fop... no [ 71s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 71s] checking for XML catalog... /etc/xml/catalog [ 71s] checking for xmlcatalog... /bin/xmlcatalog [ 71s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 71s] checking for DocBook XSL Stylesheets in XML catalog... found [ 71s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 71s] checking whether to enable runtime debugging code... no [ 71s] checking whether date can output nanoseconds... yes [ 71s] checking whether date can format dates... yes [ 71s] checking for yelp-tools... no [ 71s] checking python3 module: "pygments"... no [ 71s] checking that generated files are newer than configure... done [ 71s] configure: creating ./config.status [ 73s] config.status: creating Makefile [ 73s] config.status: creating gtk-doc.pc [ 73s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 73s] config.status: creating buildsystems/autotools/Makefile [ 73s] config.status: creating buildsystems/cmake/Makefile [ 73s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 73s] config.status: creating gtkdoc/config_data.py [ 73s] config.status: creating help/Makefile [ 73s] config.status: creating help/manual/Makefile [ 73s] config.status: creating tests/Makefile [ 73s] config.status: creating tests/annotations/Makefile [ 73s] config.status: creating tests/annotations/src/Makefile [ 74s] config.status: creating tests/annotations/docs/Makefile [ 74s] config.status: creating tests/bugs/Makefile [ 74s] config.status: creating tests/bugs/src/Makefile [ 74s] config.status: creating tests/bugs/docs/Makefile [ 74s] config.status: creating tests/empty/Makefile [ 74s] config.status: creating tests/empty/src/Makefile [ 74s] config.status: creating tests/empty/docs/Makefile [ 74s] config.status: creating tests/fail/Makefile [ 74s] config.status: creating tests/fail/src/Makefile [ 74s] config.status: creating tests/fail/docs/Makefile [ 74s] config.status: creating tests/gobject/Makefile [ 74s] config.status: creating tests/gobject/src/Makefile [ 74s] config.status: creating tests/gobject/docs/Makefile [ 74s] config.status: creating tests/program/Makefile [ 74s] config.status: creating tests/program/src/Makefile [ 74s] config.status: creating tests/program/docs/Makefile [ 75s] config.status: creating tests/repro/Makefile [ 75s] config.status: creating tests/repro/src/Makefile [ 75s] config.status: creating tests/repro/docs/Makefile [ 75s] config.status: creating gtkdoc-check [ 75s] config.status: creating gtkdoc-depscan [ 75s] config.status: creating gtkdoc-fixxref [ 75s] config.status: creating gtkdoc-mkdb [ 75s] config.status: creating gtkdoc-mkhtml [ 75s] config.status: creating gtkdoc-mkhtml2 [ 75s] config.status: creating gtkdoc-mkman [ 75s] config.status: creating gtkdoc-mkpdf [ 75s] config.status: creating gtkdoc-rebase [ 75s] config.status: creating gtkdoc-scan [ 75s] config.status: creating gtkdoc-scangobj [ 75s] config.status: creating buildsystems/autotools/gtkdocize [ 75s] config.status: creating tests/tools.sh [ 75s] config.status: executing depfiles commands [ 77s] config.status: executing libtool commands [ 77s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 77s] configure: [ 77s] gtk-doc was configured with the following options: [ 77s] ================================================== [ 77s] configure: PDF support disabled, no dblatex or fop available [ 77s] configure: Skipping regression tests [ 77s] configure: Debug tracing disabled [ 77s] configure: Documentation disabled [ 77s] + /bin/make -j12 [ 77s] git.mk: Generating .gitignore [ 77s] Making all in buildsystems/autotools [ 77s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 77s] git.mk: Generating .gitignore [ 77s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 77s] Making all in buildsystems/cmake [ 77s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 77s] git.mk: Generating .gitignore [ 77s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 77s] Making all in help [ 77s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 77s] git.mk: Generating .gitignore [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 77s] git.mk: Generating .gitignore [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 77s] make[2]: Nothing to be done for 'all-am'. [ 77s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 77s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 77s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 77s] Making all in tests [ 77s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 77s] git.mk: Generating .gitignore [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 77s] git.mk: Generating .gitignore [ 77s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 77s] make[2]: Nothing to be done for 'all-am'. [ 77s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 77s] git.mk: Generating .gitignore [ 77s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 77s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 77s] git.mk: Generating .gitignore [ 78s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 78s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 78s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 78s] git.mk: Generating .gitignore [ 78s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 78s] git.mk: Generating .gitignore [ 78s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 78s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 78s] git.mk: Generating .gitignore [ 78s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 78s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 78s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 78s] git.mk: Generating .gitignore [ 78s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 78s] git.mk: Generating .gitignore [ 78s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 78s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 78s] make[3]: warning: -j1 forced in makefile: resetting jobserver mode. [ 78s] git.mk: Generating .gitignore [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 79s] git.mk: Generating .gitignore [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 79s] git.mk: Generating .gitignore [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 79s] git.mk: Generating .gitignore [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 79s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 79s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 79s] git.mk: Generating .gitignore [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 79s] git.mk: Generating .gitignore [ 79s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 79s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 79s] git.mk: Generating .gitignore [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 80s] git.mk: Generating .gitignore [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 80s] git.mk: Generating .gitignore [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 80s] git.mk: Generating .gitignore [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 80s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 80s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 80s] git.mk: Generating .gitignore [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 80s] git.mk: Generating .gitignore [ 80s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 80s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 80s] git.mk: Generating .gitignore [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] make[1]: Nothing to be done for 'all-am'. [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] + exit 0 [ 81s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.dVlO3V [ 81s] + umask 022 [ 81s] + cd /home/abuild/rpmbuild/BUILD [ 81s] + cd gtk-doc-1.33.2 [ 81s] + LANG=C [ 81s] + export LANG [ 81s] + unset DISPLAY [ 81s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 [ 81s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 [ 81s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 install [ 81s] Making install in buildsystems/autotools [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/bin' [ 81s] /bin/install -c gtkdocize '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/bin' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/aclocal' [ 81s] /bin/install -c -m 644 gtk-doc.m4 '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/aclocal' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/data' [ 81s] /bin/install -c -m 644 gtk-doc.make gtk-doc.flat.make gtk-doc.no-xslt.make gtk-doc.no-xslt-flat.make '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/data' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 81s] Making install in buildsystems/cmake [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 81s] make[2]: Nothing to be done for 'install-exec-am'. [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/cmake/GtkDoc' [ 81s] /bin/install -c -m 644 GtkDocConfig.cmake GtkDocConfigVersion.cmake GtkDocScanGObjWrapper.cmake '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/cmake/GtkDoc' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 81s] Making install in help [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] make[3]: Nothing to be done for 'install-exec-am'. [ 81s] make[3]: Nothing to be done for 'install-data-am'. [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 81s] Making install in tests [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[3]: Nothing to be done for 'install-exec-am'. [ 81s] make[3]: Nothing to be done for 'install-data-am'. [ 81s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 81s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/bin' [ 81s] /bin/install -c gtkdoc-check gtkdoc-depscan gtkdoc-fixxref gtkdoc-mkdb gtkdoc-mkhtml gtkdoc-mkhtml2 gtkdoc-mkman gtkdoc-mkpdf gtkdoc-rebase gtkdoc-scan gtkdoc-scangobj '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/bin' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/data' [ 81s] /bin/install -c -m 644 gtk-doc.xsl version-greater-or-equal.xsl devhelp2.xsd devhelp2.xsl style/home.png style/left.png style/left-insensitive.png style/right.png style/right-insensitive.png style/up.png style/up-insensitive.png style/style.css '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/data' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/pkgconfig' [ 81s] /bin/install -c -m 644 gtk-doc.pc '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/pkgconfig' [ 81s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/python/gtkdoc' [ 81s] /bin/install -c -m 644 gtkdoc/__init__.py gtkdoc/check.py gtkdoc/common.py gtkdoc/config.py gtkdoc/config_data.py gtkdoc/fixxref.py gtkdoc/highlight.py gtkdoc/md_to_db.py gtkdoc/mkdb.py gtkdoc/mkhtml.py gtkdoc/mkhtml2.py gtkdoc/mkman.py gtkdoc/mkpdf.py gtkdoc/rebase.py gtkdoc/scan.py gtkdoc/scangobj.py '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/gtk-doc/python/gtkdoc' [ 81s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 81s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/info/dir [ 81s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 -regex '.*\.la$' [ 81s] + xargs rm -f -- [ 81s] + xargs rm -f -- [ 81s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 -regex '.*\.a$' [ 81s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/help [ 81s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.33.2-1.2 --unique-debug-src-base gtk-doc-1.33.2-1.2.x86_64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2 [ 81s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debuginfo.manifest [ 81s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debugsource.manifest [ 81s] + /usr/lib/rpm/check-buildroot [ 81s] + /usr/lib/rpm//brp-compress [ 81s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 82s] + /usr/lib/rpm/brp-python-hardlink [ 82s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 [ 82s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/isu.list [ 82s] ~/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 82s] ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 82s] Processing files: gtk-doc-1.33.2-1.2.x86_64 [ 82s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.X8DhYW [ 82s] + umask 022 [ 82s] + cd /home/abuild/rpmbuild/BUILD [ 82s] + cd gtk-doc-1.33.2 [ 82s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/licenses/gtk-doc [ 82s] + export LC_ALL=C [ 82s] + LC_ALL=C [ 82s] + export LICENSEDIR [ 82s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/licenses/gtk-doc [ 82s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64/usr/share/licenses/gtk-doc [ 82s] + exit 0 [ 83s] Provides: gtk-doc = 1.33.2-1.2 gtk-doc(x86-64) = 1.33.2-1.2 pkgconfig(gtk-doc) = 1.33.1 [ 83s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 83s] Requires: /bin/python3 /bin/sh /usr/bin/pkg-config [ 83s] Processing files: gtk-doc-debugsource-1.33.2-1.2.x86_64 [ 83s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/debugsourcefiles.list [ 83s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 83s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 83s] [ 83s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 [ 84s] Wrote: /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/gtk-doc-1.33.2-1.2.x86_64.rpm [ 84s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/gtk-doc-debugsource-1.33.2-1.2.x86_64.rpm [ 84s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.9yhs4V [ 84s] + umask 022 [ 84s] + cd /home/abuild/rpmbuild/BUILD [ 84s] + cd gtk-doc-1.33.2 [ 84s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.x86_64 [ 84s] + exit 0 [ 85s] ... checking for files with abuild user/group [ 85s] ... creating baselibs [ 85s] ... comparing built packages with the former built [ 85s] /usr/lib/build/pkg-diff.sh [ 85s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 85s] This is not a prerelease project. Compare the project name. [ 85s] comparing rpmtags [ 86s] comparing RELEASE [ 86s] comparing PROVIDES [ 86s] comparing scripts [ 86s] comparing filelist [ 86s] comparing file checksum [ 86s] RPM meta information is identical [ 86s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/gtk-doc-1.33.2-1.2.x86_64.rpm [ 86s] Comparing gtk-doc-1.33.2-1.1.x86_64.rpm to gtk-doc-1.33.2-1.2.x86_64.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.wyYN601204/tmp.YnfD601385 2023-10-06 14:02:56.119680111 +0900 [ 87s] +++ /tmp/tmp.wyYN601204/tmp.BtiZ601407 2023-10-06 14:02:56.155680110 +0900 [ 87s] @@ -8,7 +8,7 @@ [ 87s] GPL-2.0+ GPL-2.0+ [ 87s] Productivity/Publishing/SGML http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 87s] (none) 4.14.1 x86_64-tizen-linux [ 87s] - cpio xz 5T [ 87s] + cpio zstd 9 [ 87s] [ 87s] (none) (none) (none) [ 87s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 87s] RPM meta information is different [ 87s] compare /.build.oldpackages/gtk-doc-debugsource-1.33.2-1.1.x86_64.rpm /home/abuild/rpmbuild/RPMS/x86_64/gtk-doc-debugsource-1.33.2-1.2.x86_64.rpm [ 87s] Comparing gtk-doc-debugsource-1.33.2-1.1.x86_64.rpm to gtk-doc-debugsource-1.33.2-1.2.x86_64.rpm [ 87s] This is not a prerelease project. Compare the project name. [ 87s] comparing rpmtags [ 87s] --- /tmp/tmp.qWRL601783/tmp.LBFR601963 2023-10-06 14:02:56.703680093 +0900 [ 87s] +++ /tmp/tmp.qWRL601783/tmp.VNdZ602006 2023-10-06 14:02:56.743680092 +0900 [ 87s] @@ -7,7 +7,7 @@ [ 87s] GPL-2.0+ GPL-2.0+ [ 87s] Development/Debug http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 87s] (none) 4.14.1 x86_64-tizen-linux [ 87s] - cpio xz 5T [ 87s] + cpio zstd 9 [ 87s] [ 87s] (none) (none) (none) [ 87s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 87s] RPM meta information is different [ 87s] [ 87s] 763f3fd73db9 finished "build gtk-doc.spec" at Fri Oct 6 05:02:56 UTC 2023. [ 87s] Retried build at Mon Nov 27 02:50:48 2023 returned same result, skipped Retried build at Tue Feb 27 06:30:32 2024 returned same result, skipped Retried build at Tue Mar 5 05:34:01 2024 returned same result, skipped Retried build at Fri Mar 8 01:32:52 2024 returned same result, skipped Retried build at Fri Mar 22 08:28:38 2024 returned same result, skipped Retried build at Thu Apr 4 02:27:22 2024 returned same result, skipped Retried build at Fri Apr 19 12:51:55 2024 returned same result, skipped Retried build at Thu May 30 05:10:44 2024 returned same result, skipped Retried build at Wed Jun 19 03:08:34 2024 returned same result, skipped Retried build at Mon Jun 24 03:42:14 2024 returned same result, skipped Retried build at Mon Aug 5 02:38:11 2024 returned same result, skipped Retried build at Tue Aug 6 11:30:19 2024 returned same result, skipped Retried build at Thu Aug 22 08:21:08 2024 returned same result, skipped Retried build at Mon Sep 9 03:17:09 2024 returned same result, skipped Retried build at Mon Oct 28 02:41:00 2024 returned same result, skipped