[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9 [ 0s] Using BUILD_ARCH=aarch64:aarch64_ilp32:armv8l [ 0s] [ 0s] [ 0s] 714a51c77058 started "build gtk-doc.spec" at Mon Nov 27 07:36:54 UTC 2023. [ 0s] [ 0s] Building gtk-doc for project 'Tizen-Base-ASAN' repository 'standard' arch 'aarch64' srcmd5 'b4f14cadd1338b1a2d43df612b5ef79f' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/gtk-doc.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/gtk-doc.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/9/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.9/.build-srcdir/gtk-doc.spec build ... [ 1s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/46] preinstalling libmagic-data... [ 1s] [2/46] preinstalling libncurses... [ 1s] [3/46] preinstalling setup... [ 1s] [4/46] preinstalling filesystem... [ 1s] [5/46] preinstalling glibc... [ 1s] [6/46] preinstalling libgcc... [ 1s] [7/46] preinstalling libstdc++... [ 1s] [8/46] preinstalling libasan... [ 1s] [9/46] preinstalling bash... [ 1s] [10/46] preinstalling findutils... [ 1s] [11/46] preinstalling grep... [ 1s] [12/46] preinstalling libattr... [ 1s] [13/46] preinstalling libblkid... [ 1s] [14/46] preinstalling libbz2... [ 1s] [15/46] preinstalling libcap... [ 1s] [16/46] preinstalling libfreebl3... [ 1s] [17/46] preinstalling liblua... [ 1s] [18/46] preinstalling liblzma... [ 1s] [19/46] preinstalling libpopt... [ 1s] [20/46] preinstalling libreadline... [ 1s] [21/46] preinstalling libsmack... [ 1s] [22/46] preinstalling libuuid... [ 1s] [23/46] preinstalling libzstd1... [ 1s] [24/46] preinstalling nspr... [ 1s] [25/46] preinstalling sed... [ 1s] [26/46] preinstalling zlib... [ 1s] [27/46] preinstalling diffutils... [ 1s] [28/46] preinstalling libsqlite... [ 2s] [29/46] preinstalling qemu-accel-x86_64-aarch64... [ 3s] [30/46] preinstalling qemu-linux-user-x86_64-cross... [ 3s] [31/46] preinstalling asan-build-env... [ 3s] [32/46] preinstalling libacl... [ 3s] [33/46] preinstalling libelf... [ 3s] [34/46] preinstalling libmount... [ 3s] [35/46] preinstalling smack... [ 3s] [36/46] preinstalling bzip2... [ 3s] [37/46] preinstalling coreutils... [ 3s] [38/46] preinstalling libmagic... [ 3s] [39/46] preinstalling libxml2... [ 3s] [40/46] preinstalling tar... [ 3s] [41/46] preinstalling util-linux... [ 3s] [42/46] preinstalling util-linux-su... [ 3s] [43/46] preinstalling nss... [ 3s] [44/46] preinstalling libsoftokn3... [ 3s] [45/46] preinstalling rpm... [ 4s] [46/46] preinstalling asan-force-options... [ 4s] running qemu-linux-user-x86_64-cross postinstall script [ 4s] running qemu-accel-x86_64-aarch64 postinstall script [ 4s] running setup postinstall script [ 4s] chroot: failed to run command '': No such file or directory [ 4s] running asan-build-env postinstall script [ 4s] running asan-force-options postinstall script [ 4s] /usr/bin [ 6s] initializing rpm db... [ 6s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 6s] breaking dependency libasan -> glibc [ 6s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 6s] breaking dependency libasan -> libgcc [ 6s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 6s] breaking dependency libstdc++ -> glibc [ 6s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 6s] breaking dependency setup -> asan-runtime-env [ 6s] cycle: nss -> libsoftokn3 [ 6s] breaking dependency nss -> libsoftokn3 [ 6s] done [ 6s] querying package ids... [ 7s] [1/121] cumulate libmagic-data-5.44-1.17 [ 7s] [2/121] cumulate setup-0.9-1.6 [ 7s] [3/121] cumulate filesystem-3.1-1.2 [ 7s] [4/121] cumulate glibc-2.30-1.17 [ 7s] [5/121] cumulate libatomic-9.2.0-1.15 [ 7s] [6/121] cumulate libgcc-9.2.0-1.15 [ 7s] [7/121] cumulate libgomp-9.2.0-1.15 [ 7s] [8/121] cumulate libitm-9.2.0-1.15 [ 7s] [9/121] cumulate libgfortran-9.2.0-1.15 [ 7s] [10/121] cumulate libstdc++-9.2.0-1.15 [ 7s] [11/121] cumulate libstdc++-devel-9.2.0-1.15 [ 7s] [12/121] cumulate binutils-2.33.1-1.18 [ 7s] [13/121] cumulate libasan-9.2.0-1.15 [ 7s] [14/121] cumulate libcc1-9.2.0-1.15 [ 7s] [15/121] cumulate libubsan-9.2.0-1.15 [ 7s] [16/121] cumulate asan-runtime-env-9.2.0-2.10 [ 7s] [17/121] cumulate bash-3.2.57-1.8 [ 7s] [18/121] cumulate cpio-2.8-1.3 [ 7s] [19/121] cumulate findutils-4.3.8-1.17 [ 7s] [20/121] cumulate gdbm-1.8.3-1.20 [ 7s] [21/121] cumulate hostname-3.23-1.3 [ 7s] [22/121] cumulate libattr-2.5.1-1.18 [ 7s] [23/121] cumulate libblkid-2.37.4-2.1 [ 7s] [24/121] cumulate libbz2-1.0.8-1.18 [ 7s] [25/121] cumulate libcap-2.24-1.17 [ 7s] [26/121] cumulate libext2fs-1.46.0-1.17 [ 7s] [27/121] cumulate libffi-3.4.2-1.19 [ 7s] [28/121] cumulate libfreebl3-3.87-2.6 [ 7s] [29/121] cumulate libgpg-error-1.46-1.3 [ 7s] [30/121] cumulate libltdl-2.4.7-1.21 [ 7s] [31/121] cumulate liblua-5.1.5-1.17 [ 7s] [32/121] cumulate liblzma-5.4.0-1.21 [ 7s] [33/121] cumulate libpcre-8.45-1.6 [ 7s] [34/121] cumulate libpopt-1.16-1.17 [ 7s] [35/121] cumulate libpython-2.7.18-1.19 [ 7s] [36/121] cumulate libpython3_111_0-3.11.2-1.17 [ 7s] [37/121] cumulate libsmack-1.3.1-1.16 [ 7s] [38/121] cumulate libsmartcols-2.37.4-2.1 [ 7s] [39/121] cumulate libuuid-2.37.4-2.1 [ 7s] [40/121] cumulate libzstd1-1.5.2-1.16 [ 7s] [41/121] cumulate m4-1.4.19-1.3 [ 7s] [42/121] cumulate net-tools-2.0_20121208git-2.1 [ 7s] [43/121] cumulate nspr-4.35-1.17 [ 7s] [44/121] cumulate patch-2.7.6-1.16 [ 7s] [45/121] cumulate pkg-config-0.29.2-1.18 [ 7s] [46/121] cumulate sed-4.1c-1.3 [ 7s] [47/121] cumulate update-alternatives-1.21.18-1.3 [ 7s] [48/121] cumulate which-2.17-1.3 [ 7s] [49/121] cumulate zlib-1.2.13-1.20 [ 7s] [50/121] cumulate diffutils-3.8-1.3 [ 7s] [51/121] cumulate libexpat-2.4.1-1.20 [ 7s] [52/121] cumulate libopenssl11-1.1.1u-1.21 [ 7s] [53/121] cumulate libsqlite-3.40.1-1.17 [ 7s] [54/121] cumulate db4-4.8.30.NC-1.19 [ 7s] [55/121] cumulate build-compare-2015.04.28-1.11 [ 7s] [56/121] cumulate qemu-linux-user-x86_64-cross-5.2.0-21.12 [ 7s] [57/121] cumulate asan-build-env-9.2.0-2.10 [ 7s] [58/121] cumulate cpp-9.2.0-1.15 [ 7s] [59/121] cumulate gcc-c++-9.2.0-1.15 [ 7s] [60/121] cumulate gawk-3.1.5-1.3 [ 7s] [61/121] cumulate grep-2.5.2-1.3 [ 7s] [62/121] cumulate libacl-2.2.53-1.20 [ 7s] [63/121] cumulate libelf-0.189-1.21 [ 7s] [64/121] cumulate libmount-2.37.4-2.1 [ 7s] [65/121] cumulate nss-certs-3.87-2.6 [ 7s] [66/121] cumulate smack-1.3.1-1.16 [ 7s] [67/121] cumulate bzip2-1.0.8-1.18 [ 7s] [68/121] cumulate coreutils-6.9-14.11 [ 7s] [69/121] cumulate libfdisk-2.37.4-2.1 [ 7s] [70/121] cumulate libgcrypt-1.10.1-1.3 [ 7s] [71/121] cumulate libmagic-5.44-1.17 [ 7s] [72/121] cumulate libxml2-2.10.2-1.19 [ 7s] [73/121] cumulate make-4.3-1.17 [ 7s] [74/121] cumulate xz-5.4.0-1.21 [ 7s] [75/121] cumulate gettext-runtime-0.21.1-2.20 [ 7s] [76/121] cumulate perl-5.34.0-1.16 [ 7s] [77/121] cumulate gcc-9.2.0-1.15 [ 7s] [78/121] cumulate build-mkbaselibs-20120927-1.2 [ 7s] [79/121] cumulate linux-glibc-devel-5.4-1.5 [ 7s] [80/121] cumulate qemu-accel-x86_64-aarch64-0.4-2.5 [ 7s] [81/121] cumulate terminfo-base-full-6.2-1.20 [ 7s] [82/121] cumulate autoconf-2.71-1.21 [ 7s] [83/121] cumulate file-5.44-1.17 [ 7s] [84/121] cumulate glibc-locale-2.30-1.17 [ 7s] [85/121] cumulate tar-1.17-1.3 [ 7s] [86/121] cumulate gzip-1.3.12-1.18 [ 7s] [87/121] cumulate pam-1.1.6-1.3 [ 7s] [88/121] cumulate tzdata-2023c-1.3 [ 7s] [89/121] cumulate libdw-0.189-1.21 [ 7s] [90/121] cumulate libxslt-1.1.37-1.3 [ 7s] [91/121] cumulate nss-3.87-2.6 [ 7s] [92/121] cumulate libarchive-3.6.2-1.20 [ 7s] [93/121] cumulate glibc-devel-2.30-1.17 [ 7s] [94/121] cumulate automake-1.16.5-1.21 [ 7s] [95/121] cumulate libasm-0.189-1.21 [ 7s] [96/121] cumulate libxslt-tools-1.1.37-1.3 [ 7s] [97/121] cumulate build-20120927-1.2 [ 7s] [98/121] cumulate libncurses6-6.2-1.20 [ 7s] [99/121] cumulate libsoftokn3-3.87-2.6 [ 7s] [100/121] cumulate rpm-4.14.1.1-2.5 [ 7s] [101/121] cumulate libncurses-6.2-1.20 [ 7s] [102/121] cumulate less-608-1.3 [ 7s] [103/121] cumulate libreadline-5.2-1.18 [ 7s] [104/121] cumulate asan-force-options-9.2.0-2.10 [ 7s] [105/121] cumulate procps-ng-3.3.17-1.3 [ 7s] [106/121] cumulate libtool-2.4.7-1.21 [ 7s] [107/121] cumulate elfutils-0.189-1.21 [ 7s] [108/121] cumulate rpm-build-4.14.1.1-2.5 [ 7s] [109/121] cumulate libxml2-tools-2.10.2-1.19 [ 7s] [110/121] cumulate python-2.7.18-1.19 [ 7s] [111/121] cumulate python3-base-3.11.2-1.17 [ 7s] [112/121] cumulate util-linux-2.37.4-2.1 [ 7s] [113/121] cumulate sgml-skel-0.7.1-1.2 [ 7s] [114/121] cumulate util-linux-su-2.37.4-2.1 [ 7s] [115/121] cumulate python-libxml2-2.10.2-1.3 [ 7s] [116/121] cumulate gettext-tools-0.21.1-2.20 [ 7s] [117/121] cumulate iso_ent-2000.11.03-1.2 [ 7s] [118/121] cumulate itstool-2.0.7-1.2 [ 7s] [119/121] cumulate xmlcharent-0.3-405.2 [ 7s] [120/121] cumulate docbook_4-4.5-1.2 [ 7s] [121/121] cumulate docbook-xsl-stylesheets-1.79.2-1.2 [ 7s] now installing cumulated packages [ 7s] Preparing... ######################################## [ 7s] Updating / installing... [ 7s] asan-runtime-env-9.2.0-2.10 ######################################## [ 7s] setup-0.9-1.6 ######################################## [ 7s] filesystem-3.1-1.2 ######################################## [ 7s] glibc-2.30-1.17 warning: /etc/ld.so.conf saved as /etc/ld.so.conf.rpmorig [ 7s] ######################################## [ 7s] libgcc-9.2.0-1.15 ######################################## [ 7s] libstdc++-9.2.0-1.15 ######################################## [ 7s] libasan-9.2.0-1.15 ######################################## [ 8s] bash-3.2.57-1.8 ######################################## [ 8s] zlib-1.2.13-1.20 ######################################## [ 8s] liblzma-5.4.0-1.21 ######################################## [ 8s] coreutils-6.9-14.11 ######################################## [ 8s] libxml2-2.10.2-1.19 ######################################## [ 8s] libbz2-1.0.8-1.18 ######################################## [ 8s] libelf-0.189-1.21 ######################################## [ 8s] libdw-0.189-1.21 ######################################## [ 8s] gawk-3.1.5-1.3 ######################################## [ 8s] libblkid-2.37.4-2.1 ######################################## [ 9s] nspr-4.35-1.17 ######################################## [ 9s] sed-4.1c-1.3 ######################################## [ 9s] libopenssl11-1.1.1u-1.21 ######################################## [ 9s] libsqlite-3.40.1-1.17 ######################################## [ 9s] pam-1.1.6-1.3 ######################################## [ 9s] gdbm-1.8.3-1.20 ######################################## [ 10s] perl-5.34.0-1.16 ######################################## [ 11s] libcap-2.24-1.17 ######################################## [ 11s] libfreebl3-3.87-2.6 ######################################## [ 11s] libgpg-error-1.46-1.3 ######################################## [ 11s] liblua-5.1.5-1.17 ######################################## [ 11s] libpopt-1.16-1.17 ######################################## [ 11s] libpython-2.7.18-1.19 ######################################## [ 11s] libuuid-2.37.4-2.1 ######################################## [ 11s] libzstd1-1.5.2-1.16 ######################################## [ 12s] binutils-2.33.1-1.18 ######################################## [ 12s] libfdisk-2.37.4-2.1 ######################################## [ 12s] libgcrypt-1.10.1-1.3 ######################################## [ 12s] libxslt-1.1.37-1.3 ######################################## [ 12s] build-mkbaselibs-20120927-1.2 ######################################## [ 12s] nss-certs-3.87-2.6 ######################################## [ 12s] libsoftokn3-3.87-2.6 ######################################## [ 12s] nss-3.87-2.6 ######################################## [ 12s] libmount-2.37.4-2.1 ######################################## [ 12s] libasm-0.189-1.21 ######################################## [ 12s] bzip2-1.0.8-1.18 ######################################## [ 13s] linux-glibc-devel-5.4-1.5 ######################################## [ 13s] glibc-devel-2.30-1.17 ######################################## [ 13s] terminfo-base-full-6.2-1.20 ######################################## [ 13s] libncurses6-6.2-1.20 ######################################## [ 13s] libreadline-5.2-1.18 ######################################## [ 13s] libxml2-tools-2.10.2-1.19 ######################################## [ 13s] sgml-skel-0.7.1-1.2 ######################################## [ 13s] iso_ent-2000.11.03-1.2 ######################################## [ 13s] gzip-1.3.12-1.18 ######################################## [ 13s] xz-5.4.0-1.21 ######################################## [ 13s] make-4.3-1.17 ######################################## [ 14s] gettext-runtime-0.21.1-2.20 ######################################## [ 14s] findutils-4.3.8-1.17 ######################################## [ 14s] libattr-2.5.1-1.18 ######################################## [ 14s] libacl-2.2.53-1.20 ######################################## [ 14s] tar-1.17-1.3 ######################################## [ 14s] libarchive-3.6.2-1.20 ######################################## [ 14s] libffi-3.4.2-1.19 ######################################## [ 14s] libltdl-2.4.7-1.21 ######################################## [ 14s] libpcre-8.45-1.6 ######################################## [ 15s] grep-2.5.2-1.3 ######################################## [ 15s] xmlcharent-0.3-405.2 ######################################## [ 15s] docbook_4-4.5-1.2 ######################################## [ 16s] libpython3_111_0-3.11.2-1.17 ######################################## [ 16s] libsmack-1.3.1-1.16 ######################################## [ 16s] libsmartcols-2.37.4-2.1 ######################################## [ 17s] util-linux-2.37.4-2.1 ######################################## [ 17s] m4-1.4.19-1.3 ######################################## [ 17s] autoconf-2.71-1.21 ######################################## [ 17s] automake-1.16.5-1.21 ######################################## [ 17s] patch-2.7.6-1.16 ######################################## [ 17s] libexpat-2.4.1-1.20 ######################################## [ 17s] db4-4.8.30.NC-1.19 ######################################## [ 18s] python-2.7.18-1.19 ######################################## [ 18s] python-libxml2-2.10.2-1.3 ######################################## [ 18s] libcc1-9.2.0-1.15 ######################################## [ 18s] libubsan-9.2.0-1.15 ######################################## [ 18s] libgfortran-9.2.0-1.15 ######################################## [ 18s] libatomic-9.2.0-1.15 ######################################## [ 18s] libgomp-9.2.0-1.15 ######################################## [ 19s] libitm-9.2.0-1.15 ######################################## [ 19s] gcc-9.2.0-1.15 ######################################## [ 19s] libmagic-data-5.44-1.17 ######################################## [ 19s] libmagic-5.44-1.17 ######################################## [ 20s] rpm-4.14.1.1-2.5 ######################################## [ 20s] asan-force-options-9.2.0-2.10 ######################################## [ 21s] /usr/bin [ 24s] rpm-build-4.14.1.1-2.5 ######################################## [ 24s] file-5.44-1.17 ######################################## [ 27s] qemu-accel-x86_64-aarch64-0.4-2.5 ######################################## [ 28s] itstool-2.0.7-1.2 ######################################## [ 28s] gettext-tools-0.21.1-2.20 ######################################## [ 29s] docbook-xsl-stylesheets-1.79.2-1.2 ######################################## [ 30s] python3-base-3.11.2-1.17 ######################################## [ 30s] libtool-2.4.7-1.21 ######################################## [ 30s] util-linux-su-2.37.4-2.1 ######################################## [ 30s] smack-1.3.1-1.16 ######################################## [ 30s] build-20120927-1.2 ######################################## [ 30s] libncurses-6.2-1.20 ######################################## [ 30s] less-608-1.3 ######################################## [ 30s] procps-ng-3.3.17-1.3 ######################################## [ 30s] elfutils-0.189-1.21 ######################################## [ 30s] libxslt-tools-1.1.37-1.3 ######################################## [ 30s] glibc-locale-2.30-1.17 ######################################## [ 31s] tzdata-2023c-1.3 ######################################## [ 31s] cpp-9.2.0-1.15 ######################################## [ 32s] gcc-c++-9.2.0-1.15 ######################################## [ 32s] build-compare-2015.04.28-1.11 ######################################## [ 32s] qemu-linux-user-x86_64-cross-5.2.0-21.######################################## [ 33s] asan-build-env-9.2.0-2.10 ######################################## [ 33s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 33s] cpio-2.8-1.3 ######################################## [ 33s] hostname-3.23-1.3 ######################################## [ 33s] libext2fs-1.46.0-1.17 ######################################## [ 34s] net-tools-2.0_20121208git-2.1 ######################################## [ 34s] pkg-config-0.29.2-1.18 ######################################## [ 34s] update-alternatives-1.21.18-1.3 ######################################## [ 34s] which-2.17-1.3 ######################################## [ 34s] diffutils-3.8-1.3 ######################################## [ 34s] libstdc++-devel-9.2.0-1.15 ######################################## [ 36s] now finalizing build dir... [ 38s] ----------------------------------------------------------------- [ 38s] I have the following modifications for gtk-doc.spec: [ 38s] 4c4 [ 38s] < Release: 0 [ 38s] --- [ 38s] > Release: 1.2 [ 38s] 17c17 [ 38s] < BuildRequires: gettext [ 38s] --- [ 38s] > BuildRequires: gettext-tools [ 39s] build target is aarch64-tizen-linux [ 39s] ----------------------------------------------------------------- [ 39s] ----- building gtk-doc.spec (user abuild) [ 39s] ----------------------------------------------------------------- [ 39s] ----------------------------------------------------------------- [ 40s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=aarch64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc' /home/abuild/rpmbuild/SOURCES/gtk-doc.spec [ 40s] Building target platforms: aarch64-tizen-linux [ 40s] Building for target aarch64-tizen-linux [ 40s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.tLoMjB [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + rm -rf gtk-doc-1.33.2 [ 40s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gtk-doc-1.33.2.tar.xz [ 40s] + /bin/tar -xof - [ 40s] + STATUS=0 [ 40s] + '[' 0 -ne 0 ']' [ 40s] + cd gtk-doc-1.33.2 [ 40s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 40s] + exit 0 [ 40s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.GrIcrE [ 40s] + umask 022 [ 40s] + cd /home/abuild/rpmbuild/BUILD [ 40s] + cd gtk-doc-1.33.2 [ 40s] + ref=/usr/lib/rpm [ 40s] + mints=0 [ 40s] + case $(uname -m) in [ 40s] ++ uname -m [ 40s] + mints=20120610 [ 40s] + for s in guess sub [ 40s] ++ find -maxdepth 8 -name config.guess [ 40s] + for s in guess sub [ 40s] ++ find -maxdepth 8 -name config.sub [ 40s] + LANG=C [ 40s] + export LANG [ 40s] + unset DISPLAY [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + LDFLAGS= [ 40s] + export LDFLAGS [ 40s] + AR=gcc-ar [ 40s] + export AR [ 40s] + NM=/bin/nm [ 40s] + export NM [ 40s] + RANLIB=gcc-ranlib [ 40s] + export RANLIB [ 40s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 40s] + export CFLAGS [ 40s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 40s] + export CXXFLAGS [ 40s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 40s] + export FFLAGS [ 40s] + ./autogen.sh --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 43s] autoreconf: export WARNINGS= [ 43s] autoreconf: Entering directory '.' [ 43s] autoreconf: configure.ac: not using Gettext [ 44s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 69s] autoreconf: configure.ac: tracing [ 74s] autoreconf: configure.ac: creating directory build-aux [ 74s] autoreconf: running: libtoolize --copy --force [ 74s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 74s] libtoolize: copying file 'build-aux/ltmain.sh' [ 75s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 75s] libtoolize: copying file 'm4/libtool.m4' [ 75s] libtoolize: copying file 'm4/ltoptions.m4' [ 75s] libtoolize: copying file 'm4/ltsugar.m4' [ 75s] libtoolize: copying file 'm4/ltversion.m4' [ 76s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 76s] autoreconf: configure.ac: not using Intltool [ 76s] autoreconf: configure.ac: not using Gtkdoc [ 76s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 99s] autoreconf: running: /usr/bin/autoconf --force [ 108s] autoreconf: configure.ac: not using Autoheader [ 109s] autoreconf: running: automake --add-missing --copy --force-missing [ 116s] configure.ac:23: installing 'build-aux/compile' [ 116s] configure.ac:27: installing 'build-aux/config.guess' [ 116s] configure.ac:27: installing 'build-aux/config.sub' [ 116s] configure.ac:14: installing 'build-aux/install-sh' [ 116s] configure.ac:14: installing 'build-aux/missing' [ 117s] Makefile.am: installing './INSTALL' [ 120s] parallel-tests: installing 'build-aux/test-driver' [ 123s] tests/annotations/src/Makefile.am: installing 'build-aux/depcomp' [ 136s] autoreconf: Leaving directory '.' [ 139s] checking for a BSD-compatible install... /bin/install -c [ 139s] checking whether build environment is sane... yes [ 139s] checking for a race-free mkdir -p... /bin/mkdir -p [ 139s] checking for gawk... gawk [ 140s] checking whether make sets $(MAKE)... yes [ 140s] checking whether make supports nested variables... yes [ 140s] checking whether UID '399' is supported by ustar format... yes [ 140s] checking whether GID '399' is supported by ustar format... yes [ 140s] checking how to create a ustar tar archive... gnutar [ 141s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 141s] checking whether make supports nested variables... (cached) yes [ 141s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 142s] checking whether the C compiler works... yes [ 142s] checking for C compiler default output file name... a.out [ 143s] checking for suffix of executables... [ 143s] checking whether we are cross compiling... no [ 144s] checking for suffix of object files... o [ 144s] checking whether the compiler supports GNU C... yes [ 144s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 145s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 145s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 145s] checking whether make supports the include directive... yes (GNU style) [ 146s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 146s] checking build system type... aarch64-tizen-linux-gnu [ 146s] checking host system type... aarch64-tizen-linux-gnu [ 146s] checking how to print strings... printf [ 146s] checking for a sed that does not truncate output... /bin/sed [ 146s] checking for grep that handles long lines and -e... /bin/grep [ 146s] checking for egrep... /bin/grep -E [ 146s] checking for fgrep... /bin/grep -F [ 147s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 147s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 147s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 147s] checking the name lister (/bin/nm) interface... BSD nm [ 147s] checking whether ln -s works... yes [ 147s] checking the maximum length of command line arguments... 1572864 [ 148s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 148s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 148s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 148s] checking for aarch64-tizen-linux-gnu-file... no [ 148s] checking for file... file [ 148s] checking for aarch64-tizen-linux-gnu-objdump... no [ 148s] checking for objdump... objdump [ 148s] checking how to recognize dependent libraries... pass_all [ 148s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 148s] checking for dlltool... no [ 148s] checking how to associate runtime and link libraries... printf %s\n [ 148s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 148s] checking for archiver @FILE support... @ [ 148s] checking for aarch64-tizen-linux-gnu-strip... no [ 148s] checking for strip... strip [ 148s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 149s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 149s] checking for sysroot... no [ 149s] checking for a working dd... /bin/dd [ 149s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 149s] checking for aarch64-tizen-linux-gnu-mt... no [ 149s] checking for mt... no [ 149s] checking if : is a manifest tool... no [ 150s] checking for stdio.h... yes [ 150s] checking for stdlib.h... yes [ 150s] checking for string.h... yes [ 150s] checking for inttypes.h... yes [ 150s] checking for stdint.h... yes [ 150s] checking for strings.h... yes [ 150s] checking for sys/stat.h... yes [ 151s] checking for sys/types.h... yes [ 151s] checking for unistd.h... yes [ 151s] checking for dlfcn.h... yes [ 151s] checking for objdir... .libs [ 152s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 152s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 153s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 153s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 153s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 153s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 153s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 154s] checking whether -lc should be explicitly linked in... no [ 155s] checking dynamic linker characteristics... GNU/Linux ld.so [ 155s] checking how to hardcode library paths into programs... immediate [ 155s] checking whether stripping libraries is possible... yes [ 155s] checking if libtool supports shared libraries... yes [ 155s] checking whether to build shared libraries... yes [ 155s] checking whether to build static libraries... yes [ 155s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 155s] checking pkg-config is at least version 0.19... yes [ 156s] checking for a Python interpreter with version >= 3.2... python3 [ 156s] checking for python3... /bin/python3 [ 157s] checking for python3 version... 3.11 [ 158s] checking for python3 platform... linux [ 158s] checking for GNU default python3 prefix... ${prefix} [ 158s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 159s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 160s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages [ 160s] checking for xsltproc... /bin/xsltproc [ 160s] checking for dblatex... no [ 160s] checking for fop... no [ 160s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 160s] checking for XML catalog... /etc/xml/catalog [ 160s] checking for xmlcatalog... /bin/xmlcatalog [ 161s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 161s] checking for DocBook XSL Stylesheets in XML catalog... found [ 161s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 161s] checking whether to enable runtime debugging code... no [ 161s] checking whether date can output nanoseconds... yes [ 161s] checking whether date can format dates... yes [ 161s] checking for yelp-tools... no [ 162s] checking python3 module: "pygments"... no [ 162s] checking that generated files are newer than configure... done [ 162s] configure: creating ./config.status [ 169s] config.status: creating Makefile [ 170s] config.status: creating gtk-doc.pc [ 170s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 170s] config.status: creating buildsystems/autotools/Makefile [ 170s] config.status: creating buildsystems/cmake/Makefile [ 171s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 171s] config.status: creating gtkdoc/config_data.py [ 171s] config.status: creating help/Makefile [ 171s] config.status: creating help/manual/Makefile [ 171s] config.status: creating tests/Makefile [ 172s] config.status: creating tests/annotations/Makefile [ 172s] config.status: creating tests/annotations/src/Makefile [ 172s] config.status: creating tests/annotations/docs/Makefile [ 172s] config.status: creating tests/bugs/Makefile [ 173s] config.status: creating tests/bugs/src/Makefile [ 173s] config.status: creating tests/bugs/docs/Makefile [ 173s] config.status: creating tests/empty/Makefile [ 174s] config.status: creating tests/empty/src/Makefile [ 174s] config.status: creating tests/empty/docs/Makefile [ 174s] config.status: creating tests/fail/Makefile [ 174s] config.status: creating tests/fail/src/Makefile [ 175s] config.status: creating tests/fail/docs/Makefile [ 175s] config.status: creating tests/gobject/Makefile [ 175s] config.status: creating tests/gobject/src/Makefile [ 175s] config.status: creating tests/gobject/docs/Makefile [ 176s] config.status: creating tests/program/Makefile [ 176s] config.status: creating tests/program/src/Makefile [ 177s] config.status: creating tests/program/docs/Makefile [ 177s] config.status: creating tests/repro/Makefile [ 177s] config.status: creating tests/repro/src/Makefile [ 177s] config.status: creating tests/repro/docs/Makefile [ 178s] config.status: creating gtkdoc-check [ 178s] config.status: creating gtkdoc-depscan [ 178s] config.status: creating gtkdoc-fixxref [ 179s] config.status: creating gtkdoc-mkdb [ 179s] config.status: creating gtkdoc-mkhtml [ 180s] config.status: creating gtkdoc-mkhtml2 [ 180s] config.status: creating gtkdoc-mkman [ 180s] config.status: creating gtkdoc-mkpdf [ 181s] config.status: creating gtkdoc-rebase [ 181s] config.status: creating gtkdoc-scan [ 182s] config.status: creating gtkdoc-scangobj [ 182s] config.status: creating buildsystems/autotools/gtkdocize [ 183s] config.status: creating tests/tools.sh [ 183s] config.status: executing depfiles commands [ 188s] config.status: executing libtool commands [ 188s] configure: [ 188s] gtk-doc was configured with the following options: [ 188s] ================================================== [ 188s] configure: PDF support disabled, no dblatex or fop available [ 188s] configure: Skipping regression tests [ 188s] configure: Debug tracing disabled [ 188s] configure: Documentation disabled [ 189s] + AR=gcc-ar [ 189s] + export AR [ 189s] + NM=/bin/nm [ 189s] + export NM [ 189s] + RANLIB=gcc-ranlib [ 189s] + export RANLIB [ 189s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 189s] + export CFLAGS [ 189s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g' [ 189s] + export CXXFLAGS [ 189s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -march=armv8-a+fp+simd+crc+crypto -mtune=cortex-a57.cortex-a53 -g -I%_fmoddir' [ 189s] + export FFLAGS [ 189s] + ./configure --build=aarch64-tizen-linux-gnu --host=aarch64-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-scrollkeeper [ 190s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 191s] checking for a BSD-compatible install... /bin/install -c [ 191s] checking whether build environment is sane... yes [ 191s] checking for a race-free mkdir -p... /bin/mkdir -p [ 191s] checking for gawk... gawk [ 191s] checking whether make sets $(MAKE)... yes [ 191s] checking whether make supports nested variables... yes [ 191s] checking whether UID '399' is supported by ustar format... yes [ 191s] checking whether GID '399' is supported by ustar format... yes [ 191s] checking how to create a ustar tar archive... gnutar [ 191s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 191s] checking whether make supports nested variables... (cached) yes [ 191s] checking for aarch64-tizen-linux-gnu-gcc... aarch64-tizen-linux-gnu-gcc [ 192s] checking whether the C compiler works... yes [ 192s] checking for C compiler default output file name... a.out [ 192s] checking for suffix of executables... [ 193s] checking whether we are cross compiling... no [ 193s] checking for suffix of object files... o [ 193s] checking whether the compiler supports GNU C... yes [ 193s] checking whether aarch64-tizen-linux-gnu-gcc accepts -g... yes [ 193s] checking for aarch64-tizen-linux-gnu-gcc option to enable C11 features... none needed [ 194s] checking whether aarch64-tizen-linux-gnu-gcc understands -c and -o together... yes [ 194s] checking whether make supports the include directive... yes (GNU style) [ 194s] checking dependency style of aarch64-tizen-linux-gnu-gcc... gcc3 [ 194s] checking build system type... aarch64-tizen-linux-gnu [ 194s] checking host system type... aarch64-tizen-linux-gnu [ 194s] checking how to print strings... printf [ 194s] checking for a sed that does not truncate output... /bin/sed [ 194s] checking for grep that handles long lines and -e... /bin/grep [ 194s] checking for egrep... /bin/grep -E [ 194s] checking for fgrep... /bin/grep -F [ 194s] checking for ld used by aarch64-tizen-linux-gnu-gcc... /usr/aarch64-tizen-linux-gnu/bin/ld [ 194s] checking if the linker (/usr/aarch64-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 194s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 195s] checking the name lister (/bin/nm) interface... BSD nm [ 195s] checking whether ln -s works... yes [ 195s] checking the maximum length of command line arguments... 1572864 [ 195s] checking how to convert aarch64-tizen-linux-gnu file names to aarch64-tizen-linux-gnu format... func_convert_file_noop [ 195s] checking how to convert aarch64-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 195s] checking for /usr/aarch64-tizen-linux-gnu/bin/ld option to reload object files... -r [ 195s] checking for aarch64-tizen-linux-gnu-file... no [ 195s] checking for file... file [ 195s] checking for aarch64-tizen-linux-gnu-objdump... no [ 195s] checking for objdump... objdump [ 195s] checking how to recognize dependent libraries... pass_all [ 195s] checking for aarch64-tizen-linux-gnu-dlltool... no [ 195s] checking for dlltool... no [ 195s] checking how to associate runtime and link libraries... printf %s\n [ 195s] checking for aarch64-tizen-linux-gnu-ar... gcc-ar [ 195s] checking for archiver @FILE support... @ [ 195s] checking for aarch64-tizen-linux-gnu-strip... no [ 195s] checking for strip... strip [ 195s] checking for aarch64-tizen-linux-gnu-ranlib... gcc-ranlib [ 196s] checking command to parse /bin/nm output from aarch64-tizen-linux-gnu-gcc object... ok [ 196s] checking for sysroot... no [ 196s] checking for a working dd... /bin/dd [ 196s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 196s] checking for aarch64-tizen-linux-gnu-mt... no [ 196s] checking for mt... no [ 196s] checking if : is a manifest tool... no [ 196s] checking for stdio.h... yes [ 196s] checking for stdlib.h... yes [ 196s] checking for string.h... yes [ 196s] checking for inttypes.h... yes [ 196s] checking for stdint.h... yes [ 197s] checking for strings.h... yes [ 197s] checking for sys/stat.h... yes [ 197s] checking for sys/types.h... yes [ 197s] checking for unistd.h... yes [ 197s] checking for dlfcn.h... yes [ 197s] checking for objdir... .libs [ 197s] checking if aarch64-tizen-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no [ 197s] checking for aarch64-tizen-linux-gnu-gcc option to produce PIC... -fPIC -DPIC [ 198s] checking if aarch64-tizen-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes [ 198s] checking if aarch64-tizen-linux-gnu-gcc static flag -static works... no [ 198s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... yes [ 198s] checking if aarch64-tizen-linux-gnu-gcc supports -c -o file.o... (cached) yes [ 198s] checking whether the aarch64-tizen-linux-gnu-gcc linker (/usr/aarch64-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 199s] checking whether -lc should be explicitly linked in... no [ 199s] checking dynamic linker characteristics... GNU/Linux ld.so [ 199s] checking how to hardcode library paths into programs... immediate [ 199s] checking whether stripping libraries is possible... yes [ 199s] checking if libtool supports shared libraries... yes [ 199s] checking whether to build shared libraries... yes [ 199s] checking whether to build static libraries... yes [ 199s] checking for aarch64-tizen-linux-gnu-pkg-config... /bin/aarch64-tizen-linux-gnu-pkg-config [ 199s] checking pkg-config is at least version 0.19... yes [ 201s] checking for a Python interpreter with version >= 3.2... python3 [ 201s] checking for python3... /bin/python3 [ 201s] checking for python3 version... 3.11 [ 202s] checking for python3 platform... linux [ 202s] checking for GNU default python3 prefix... ${prefix} [ 202s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 203s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 204s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib64/python3.11/site-packages [ 204s] checking for xsltproc... /bin/xsltproc [ 204s] checking for dblatex... no [ 204s] checking for fop... no [ 204s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 204s] checking for XML catalog... /etc/xml/catalog [ 204s] checking for xmlcatalog... /bin/xmlcatalog [ 204s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 204s] checking for DocBook XSL Stylesheets in XML catalog... found [ 204s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 204s] checking whether to enable runtime debugging code... no [ 204s] checking whether date can output nanoseconds... yes [ 204s] checking whether date can format dates... yes [ 204s] checking for yelp-tools... no [ 205s] checking python3 module: "pygments"... no [ 205s] checking that generated files are newer than configure... done [ 205s] configure: creating ./config.status [ 208s] config.status: creating Makefile [ 208s] config.status: creating gtk-doc.pc [ 208s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 209s] config.status: creating buildsystems/autotools/Makefile [ 209s] config.status: creating buildsystems/cmake/Makefile [ 209s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 209s] config.status: creating gtkdoc/config_data.py [ 209s] config.status: creating help/Makefile [ 209s] config.status: creating help/manual/Makefile [ 209s] config.status: creating tests/Makefile [ 209s] config.status: creating tests/annotations/Makefile [ 210s] config.status: creating tests/annotations/src/Makefile [ 210s] config.status: creating tests/annotations/docs/Makefile [ 210s] config.status: creating tests/bugs/Makefile [ 210s] config.status: creating tests/bugs/src/Makefile [ 210s] config.status: creating tests/bugs/docs/Makefile [ 210s] config.status: creating tests/empty/Makefile [ 210s] config.status: creating tests/empty/src/Makefile [ 210s] config.status: creating tests/empty/docs/Makefile [ 211s] config.status: creating tests/fail/Makefile [ 211s] config.status: creating tests/fail/src/Makefile [ 211s] config.status: creating tests/fail/docs/Makefile [ 211s] config.status: creating tests/gobject/Makefile [ 211s] config.status: creating tests/gobject/src/Makefile [ 212s] config.status: creating tests/gobject/docs/Makefile [ 212s] config.status: creating tests/program/Makefile [ 212s] config.status: creating tests/program/src/Makefile [ 213s] config.status: creating tests/program/docs/Makefile [ 213s] config.status: creating tests/repro/Makefile [ 213s] config.status: creating tests/repro/src/Makefile [ 214s] config.status: creating tests/repro/docs/Makefile [ 214s] config.status: creating gtkdoc-check [ 215s] config.status: creating gtkdoc-depscan [ 215s] config.status: creating gtkdoc-fixxref [ 215s] config.status: creating gtkdoc-mkdb [ 215s] config.status: creating gtkdoc-mkhtml [ 215s] config.status: creating gtkdoc-mkhtml2 [ 216s] config.status: creating gtkdoc-mkman [ 216s] config.status: creating gtkdoc-mkpdf [ 216s] config.status: creating gtkdoc-rebase [ 216s] config.status: creating gtkdoc-scan [ 216s] config.status: creating gtkdoc-scangobj [ 217s] config.status: creating buildsystems/autotools/gtkdocize [ 217s] config.status: creating tests/tools.sh [ 217s] config.status: executing depfiles commands [ 222s] config.status: executing libtool commands [ 222s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 222s] configure: [ 222s] gtk-doc was configured with the following options: [ 222s] ================================================== [ 222s] configure: PDF support disabled, no dblatex or fop available [ 222s] configure: Skipping regression tests [ 222s] configure: Debug tracing disabled [ 222s] configure: Documentation disabled [ 222s] + /bin/make -j12 [ 222s] git.mk: Generating .gitignore [ 222s] Making all in buildsystems/autotools [ 222s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 222s] git.mk: Generating .gitignore [ 222s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 222s] Making all in buildsystems/cmake [ 222s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 222s] git.mk: Generating .gitignore [ 222s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 222s] Making all in help [ 222s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 222s] git.mk: Generating .gitignore [ 222s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 222s] git.mk: Generating .gitignore [ 222s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 222s] make[2]: Nothing to be done for 'all-am'. [ 222s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 222s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 222s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 222s] Making all in tests [ 223s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 223s] git.mk: Generating .gitignore [ 223s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 223s] git.mk: Generating .gitignore [ 223s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 223s] make[2]: Nothing to be done for 'all-am'. [ 223s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 223s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 223s] git.mk: Generating .gitignore [ 223s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 223s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 223s] git.mk: Generating .gitignore [ 226s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 226s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 226s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 226s] git.mk: Generating .gitignore [ 226s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 226s] git.mk: Generating .gitignore [ 226s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 226s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 226s] git.mk: Generating .gitignore [ 229s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 229s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 229s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 229s] git.mk: Generating .gitignore [ 229s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 229s] git.mk: Generating .gitignore [ 229s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 229s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 229s] make[3]: warning: -j1 forced in makefile: resetting jobserver mode. [ 229s] git.mk: Generating .gitignore [ 233s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 233s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 233s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 233s] git.mk: Generating .gitignore [ 233s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 233s] git.mk: Generating .gitignore [ 233s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 233s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 233s] git.mk: Generating .gitignore [ 236s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 236s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 236s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 236s] git.mk: Generating .gitignore [ 236s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 236s] git.mk: Generating .gitignore [ 237s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 237s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 237s] git.mk: Generating .gitignore [ 240s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 240s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 240s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 240s] git.mk: Generating .gitignore [ 240s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 240s] git.mk: Generating .gitignore [ 240s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 240s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 240s] git.mk: Generating .gitignore [ 244s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 244s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 244s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 244s] git.mk: Generating .gitignore [ 244s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 244s] git.mk: Generating .gitignore [ 244s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 244s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 244s] git.mk: Generating .gitignore [ 248s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 248s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 248s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 248s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 248s] make[1]: Nothing to be done for 'all-am'. [ 248s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 248s] + exit 0 [ 248s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.Zc59NE [ 248s] + umask 022 [ 248s] + cd /home/abuild/rpmbuild/BUILD [ 248s] + cd gtk-doc-1.33.2 [ 248s] + LANG=C [ 248s] + export LANG [ 248s] + unset DISPLAY [ 248s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 [ 248s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 [ 248s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 install [ 248s] Making install in buildsystems/autotools [ 248s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 248s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 248s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/bin' [ 248s] /bin/install -c gtkdocize '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/bin' [ 248s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/aclocal' [ 248s] /bin/install -c -m 644 gtk-doc.m4 '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/aclocal' [ 248s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/data' [ 248s] /bin/install -c -m 644 gtk-doc.make gtk-doc.flat.make gtk-doc.no-xslt.make gtk-doc.no-xslt-flat.make '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/data' [ 248s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 248s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 248s] Making install in buildsystems/cmake [ 248s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 248s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 248s] make[2]: Nothing to be done for 'install-exec-am'. [ 248s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/cmake/GtkDoc' [ 249s] /bin/install -c -m 644 GtkDocConfig.cmake GtkDocConfigVersion.cmake GtkDocScanGObjWrapper.cmake '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/cmake/GtkDoc' [ 249s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 249s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 249s] Making install in help [ 249s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] make[3]: Nothing to be done for 'install-exec-am'. [ 249s] make[3]: Nothing to be done for 'install-data-am'. [ 249s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 249s] Making install in tests [ 249s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[3]: Nothing to be done for 'install-exec-am'. [ 249s] make[3]: Nothing to be done for 'install-data-am'. [ 249s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 249s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 249s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 249s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/bin' [ 249s] /bin/install -c gtkdoc-check gtkdoc-depscan gtkdoc-fixxref gtkdoc-mkdb gtkdoc-mkhtml gtkdoc-mkhtml2 gtkdoc-mkman gtkdoc-mkpdf gtkdoc-rebase gtkdoc-scan gtkdoc-scangobj '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/bin' [ 249s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/data' [ 249s] /bin/install -c -m 644 gtk-doc.xsl version-greater-or-equal.xsl devhelp2.xsd devhelp2.xsl style/home.png style/left.png style/left-insensitive.png style/right.png style/right-insensitive.png style/up.png style/up-insensitive.png style/style.css '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/data' [ 249s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/pkgconfig' [ 249s] /bin/install -c -m 644 gtk-doc.pc '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/pkgconfig' [ 249s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/python/gtkdoc' [ 249s] /bin/install -c -m 644 gtkdoc/__init__.py gtkdoc/check.py gtkdoc/common.py gtkdoc/config.py gtkdoc/config_data.py gtkdoc/fixxref.py gtkdoc/highlight.py gtkdoc/md_to_db.py gtkdoc/mkdb.py gtkdoc/mkhtml.py gtkdoc/mkhtml2.py gtkdoc/mkman.py gtkdoc/mkpdf.py gtkdoc/rebase.py gtkdoc/scan.py gtkdoc/scangobj.py '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/gtk-doc/python/gtkdoc' [ 249s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 249s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 249s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/info/dir [ 249s] + xargs rm -f -- [ 249s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 -regex '.*\.la$' [ 249s] + xargs rm -f -- [ 249s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 -regex '.*\.a$' [ 249s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/help [ 249s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.33.2-1.2 --unique-debug-src-base gtk-doc-1.33.2-1.2.aarch64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2 [ 251s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debuginfo.manifest [ 251s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debugsource.manifest [ 251s] + /usr/lib/rpm/check-buildroot [ 251s] + /usr/lib/rpm//brp-compress [ 251s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 252s] + /usr/lib/rpm/brp-python-hardlink [ 252s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 [ 252s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/isu.list [ 252s] ~/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 252s] ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 252s] Processing files: gtk-doc-1.33.2-1.2.aarch64 [ 252s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.bVl74B [ 252s] + umask 022 [ 252s] + cd /home/abuild/rpmbuild/BUILD [ 252s] + cd gtk-doc-1.33.2 [ 252s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/licenses/gtk-doc [ 252s] + export LC_ALL=C [ 252s] + LC_ALL=C [ 252s] + export LICENSEDIR [ 252s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/licenses/gtk-doc [ 252s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64/usr/share/licenses/gtk-doc [ 252s] + exit 0 [ 256s] Provides: gtk-doc = 1.33.2-1.2 gtk-doc(aarch-64) = 1.33.2-1.2 pkgconfig(gtk-doc) = 1.33.1 [ 256s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 256s] Requires: /bin/python3 /bin/sh /usr/bin/pkg-config [ 256s] Processing files: gtk-doc-debugsource-1.33.2-1.2.aarch64 [ 256s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/debugsourcefiles.list [ 256s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 256s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 256s] [ 256s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 [ 257s] Wrote: /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 257s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-1.33.2-1.2.aarch64.rpm [ 257s] Wrote: /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-debugsource-1.33.2-1.2.aarch64.rpm [ 257s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.5LG3jB [ 257s] + umask 022 [ 257s] + cd /home/abuild/rpmbuild/BUILD [ 257s] + cd gtk-doc-1.33.2 [ 257s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.aarch64 [ 257s] + exit 0 [ 258s] ... checking for files with abuild user/group [ 258s] ... creating baselibs [ 260s] ... comparing built packages with the former built [ 260s] /usr/lib/build/pkg-diff.sh [ 260s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 261s] This is not a prerelease project. Compare the project name. [ 261s] comparing rpmtags [ 261s] comparing RELEASE [ 261s] comparing PROVIDES [ 261s] comparing scripts [ 261s] comparing filelist [ 261s] comparing file checksum [ 261s] RPM meta information is identical [ 262s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-1.33.2-1.2.aarch64.rpm [ 262s] Comparing gtk-doc-1.33.2-1.1.aarch64.rpm to gtk-doc-1.33.2-1.2.aarch64.rpm [ 262s] This is not a prerelease project. Compare the project name. [ 262s] comparing rpmtags [ 262s] --- /tmp/tmp.Zfli599700/tmp.kWBF600191 2023-11-27 16:41:16.743884591 +0900 [ 262s] +++ /tmp/tmp.Zfli599700/tmp.qaOp600255 2023-11-27 16:41:16.767884591 +0900 [ 262s] @@ -8,7 +8,7 @@ [ 262s] GPL-2.0+ GPL-2.0+ [ 262s] Productivity/Publishing/SGML http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 262s] (none) 4.14.1 aarch64-tizen-linux [ 262s] - cpio xz 5T [ 262s] + cpio zstd 9 [ 262s] [ 262s] (none) (none) (none) [ 262s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 262s] RPM meta information is different [ 262s] compare /.build.oldpackages/gtk-doc-debugsource-1.33.2-1.1.aarch64.rpm /home/abuild/rpmbuild/RPMS/aarch64/gtk-doc-debugsource-1.33.2-1.2.aarch64.rpm [ 263s] Comparing gtk-doc-debugsource-1.33.2-1.1.aarch64.rpm to gtk-doc-debugsource-1.33.2-1.2.aarch64.rpm [ 263s] This is not a prerelease project. Compare the project name. [ 263s] comparing rpmtags [ 263s] --- /tmp/tmp.CEPo600449/tmp.jHBn600678 2023-11-27 16:41:17.379884589 +0900 [ 263s] +++ /tmp/tmp.CEPo600449/tmp.NdWb600712 2023-11-27 16:41:17.403884589 +0900 [ 263s] @@ -7,7 +7,7 @@ [ 263s] GPL-2.0+ GPL-2.0+ [ 263s] Development/Debug http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 263s] (none) 4.14.1 aarch64-tizen-linux [ 263s] - cpio xz 5T [ 263s] + cpio zstd 9 [ 263s] [ 263s] (none) (none) (none) [ 263s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 263s] RPM meta information is different [ 263s] [ 263s] 714a51c77058 finished "build gtk-doc.spec" at Mon Nov 27 07:41:17 UTC 2023. [ 263s] Retried build at Mon Nov 27 09:03:18 2023 returned same result, skipped Retried build at Tue Feb 27 09:53:18 2024 returned same result, skipped Retried build at Tue Feb 27 11:32:33 2024 returned same result, skipped Retried build at Tue Mar 5 07:48:08 2024 returned same result, skipped Retried build at Fri Mar 8 03:22:22 2024 returned same result, skipped Retried build at Fri Mar 22 12:49:22 2024 returned same result, skipped Retried build at Thu Apr 4 04:03:14 2024 returned same result, skipped Retried build at Thu Apr 4 06:16:09 2024 returned same result, skipped Retried build at Fri Apr 19 19:19:02 2024 returned same result, skipped Retried build at Thu May 30 07:50:47 2024 returned same result, skipped Retried build at Wed Jun 19 04:03:04 2024 returned same result, skipped Retried build at Mon Jun 24 04:36:55 2024 returned same result, skipped Retried build at Mon Aug 5 07:37:06 2024 returned same result, skipped Retried build at Tue Aug 6 13:49:58 2024 returned same result, skipped Retried build at Thu Aug 22 09:16:40 2024 returned same result, skipped Retried build at Mon Sep 9 04:10:06 2024 returned same result, skipped Retried build at Mon Oct 28 05:11:37 2024 returned same result, skipped