[ 0s] Memory limit set to 71855026KB [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19 [ 0s] Using BUILD_ARCH=i586:i486:i386 [ 0s] [ 0s] [ 0s] 763f3fd73db9 started "build gtk-doc.spec" at Fri Oct 6 04:21:34 UTC 2023. [ 0s] [ 0s] Building gtk-doc for project 'Tizen-Base-ASAN' repository 'standard' arch 'i586' srcmd5 'b4f14cadd1338b1a2d43df612b5ef79f' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/gtk-doc.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/gtk-doc.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/19/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.19/.build-srcdir/gtk-doc.spec build ... [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/41] preinstalling libmagic-data... [ 1s] [2/41] preinstalling libncurses... [ 1s] [3/41] preinstalling setup... [ 1s] [4/41] preinstalling filesystem... [ 1s] [5/41] preinstalling glibc... [ 1s] [6/41] preinstalling libgcc... [ 1s] [7/41] preinstalling libstdc++... [ 1s] [8/41] preinstalling libasan... [ 1s] [9/41] preinstalling bash... [ 1s] [10/41] preinstalling findutils... [ 1s] [11/41] preinstalling grep... [ 1s] [12/41] preinstalling libattr... [ 1s] [13/41] preinstalling libbz2... [ 1s] [14/41] preinstalling libcap... [ 2s] [15/41] preinstalling libfreebl3... [ 2s] [16/41] preinstalling liblua... [ 2s] [17/41] preinstalling liblzma... [ 2s] [18/41] preinstalling libpopt... [ 2s] [19/41] preinstalling libreadline... [ 2s] [20/41] preinstalling libsmack... [ 2s] [21/41] preinstalling libzstd1... [ 2s] [22/41] preinstalling nspr... [ 2s] [23/41] preinstalling sed... [ 2s] [24/41] preinstalling zlib... [ 2s] [25/41] preinstalling diffutils... [ 2s] [26/41] preinstalling libsqlite... [ 2s] [27/41] preinstalling asan-build-env... [ 2s] [28/41] preinstalling libacl... [ 2s] [29/41] preinstalling libelf... [ 2s] [30/41] preinstalling smack... [ 2s] [31/41] preinstalling bzip2... [ 2s] [32/41] preinstalling coreutils... [ 2s] [33/41] preinstalling libmagic... [ 2s] [34/41] preinstalling libxml2... [ 2s] [35/41] preinstalling util-linux... [ 2s] [36/41] preinstalling tar... [ 2s] [37/41] preinstalling util-linux-su... [ 2s] [38/41] preinstalling nss... [ 2s] [39/41] preinstalling libsoftokn3... [ 2s] [40/41] preinstalling rpm... [ 3s] [41/41] preinstalling asan-force-options... [ 3s] running setup postinstall script [ 3s] chroot: failed to run command '': No such file or directory [ 3s] running asan-force-options postinstall script [ 3s] /usr/bin [ 3s] grep: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory [ 3s] initializing rpm db... [ 4s] reordering...cycle: asan-runtime-env -> libasan -> glibc -> filesystem -> setup [ 4s] breaking dependency libasan -> glibc [ 4s] cycle: asan-runtime-env -> libasan -> libgcc -> glibc -> filesystem -> setup [ 4s] breaking dependency libasan -> libgcc [ 4s] cycle: asan-runtime-env -> libasan -> libstdc++ -> glibc -> filesystem -> setup [ 4s] breaking dependency libstdc++ -> glibc [ 4s] cycle: asan-runtime-env -> libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup [ 4s] breaking dependency setup -> asan-runtime-env [ 4s] cycle: nss -> libsoftokn3 [ 4s] breaking dependency nss -> libsoftokn3 [ 4s] done [ 4s] querying package ids... [ 4s] [1/120] cumulate libmagic-data-5.44-1.17 [ 4s] [2/120] cumulate setup-0.9-1.5 [ 4s] [3/120] cumulate filesystem-3.1-1.2 [ 4s] [4/120] cumulate glibc-2.30-1.9 [ 4s] [5/120] cumulate libatomic-9.2.0-1.14 [ 4s] [6/120] cumulate libgcc-9.2.0-1.14 [ 4s] [7/120] cumulate libgomp-9.2.0-1.14 [ 4s] [8/120] cumulate libitm-9.2.0-1.14 [ 4s] [9/120] cumulate libquadmath-9.2.0-1.14 [ 4s] [10/120] cumulate libstdc++-9.2.0-1.14 [ 4s] [11/120] cumulate libgfortran-9.2.0-1.14 [ 4s] [12/120] cumulate libstdc++-devel-9.2.0-1.14 [ 4s] [13/120] cumulate binutils-2.33.1-1.17 [ 4s] [14/120] cumulate libasan-9.2.0-1.14 [ 4s] [15/120] cumulate libcc1-9.2.0-1.14 [ 4s] [16/120] cumulate libubsan-9.2.0-1.14 [ 4s] [17/120] cumulate asan-runtime-env-9.2.0-2.8 [ 4s] [18/120] cumulate bash-3.2.57-1.7 [ 4s] [19/120] cumulate cpio-2.8-1.3 [ 4s] [20/120] cumulate findutils-4.3.8-1.17 [ 4s] [21/120] cumulate gdbm-1.8.3-1.19 [ 4s] [22/120] cumulate hostname-3.23-1.3 [ 4s] [23/120] cumulate libattr-2.5.1-1.18 [ 4s] [24/120] cumulate libblkid-2.37.4-1.6 [ 4s] [25/120] cumulate libbz2-1.0.8-1.17 [ 4s] [26/120] cumulate libcap-2.24-1.17 [ 4s] [27/120] cumulate libext2fs-1.46.0-1.17 [ 4s] [28/120] cumulate libffi-3.4.2-1.17 [ 4s] [29/120] cumulate libfreebl3-3.87-2.5 [ 4s] [30/120] cumulate libgpg-error-1.46-1.3 [ 4s] [31/120] cumulate libltdl-2.4.7-1.19 [ 4s] [32/120] cumulate liblua-5.1.5-1.16 [ 4s] [33/120] cumulate liblzma-5.4.0-1.19 [ 4s] [34/120] cumulate libpcre-8.45-1.8 [ 4s] [35/120] cumulate libpopt-1.16-1.16 [ 4s] [36/120] cumulate libpython-2.7.18-1.19 [ 4s] [37/120] cumulate libpython3_111_0-3.11.2-1.16 [ 4s] [38/120] cumulate libsmack-1.3.1-1.16 [ 4s] [39/120] cumulate libsmartcols-2.37.4-1.6 [ 4s] [40/120] cumulate libuuid-2.37.4-1.6 [ 4s] [41/120] cumulate libzstd1-1.5.2-1.16 [ 4s] [42/120] cumulate m4-1.4.19-1.3 [ 4s] [43/120] cumulate net-tools-2.0_20121208git-1.3 [ 4s] [44/120] cumulate nspr-4.35-1.16 [ 4s] [45/120] cumulate patch-2.7.6-1.16 [ 4s] [46/120] cumulate pkg-config-0.29.2-1.16 [ 4s] [47/120] cumulate sed-4.1c-1.3 [ 4s] [48/120] cumulate update-alternatives-1.21.18-1.3 [ 4s] [49/120] cumulate which-2.17-1.3 [ 4s] [50/120] cumulate zlib-1.2.13-1.17 [ 4s] [51/120] cumulate diffutils-3.8-1.3 [ 4s] [52/120] cumulate libexpat-2.4.1-1.18 [ 4s] [53/120] cumulate libopenssl11-1.1.1u-1.19 [ 4s] [54/120] cumulate libsqlite-3.40.1-1.16 [ 4s] [55/120] cumulate db4-4.8.30.NC-1.17 [ 4s] [56/120] cumulate build-compare-2015.04.28-1.10 [ 4s] [57/120] cumulate asan-build-env-9.2.0-2.8 [ 4s] [58/120] cumulate cpp-9.2.0-1.14 [ 4s] [59/120] cumulate gcc-c++-9.2.0-1.14 [ 4s] [60/120] cumulate gawk-3.1.5-1.3 [ 4s] [61/120] cumulate grep-2.5.2-1.3 [ 4s] [62/120] cumulate libacl-2.2.53-1.18 [ 4s] [63/120] cumulate libelf-0.189-1.19 [ 4s] [64/120] cumulate libmount-2.37.4-1.6 [ 4s] [65/120] cumulate nss-certs-3.87-2.5 [ 4s] [66/120] cumulate smack-1.3.1-1.16 [ 4s] [67/120] cumulate bzip2-1.0.8-1.17 [ 4s] [68/120] cumulate coreutils-6.9-14.10 [ 4s] [69/120] cumulate libfdisk-2.37.4-1.6 [ 4s] [70/120] cumulate libgcrypt-1.10.1-1.3 [ 4s] [71/120] cumulate libmagic-5.44-1.17 [ 4s] [72/120] cumulate libxml2-2.10.2-1.16 [ 4s] [73/120] cumulate make-4.3-1.16 [ 4s] [74/120] cumulate xz-5.4.0-1.19 [ 4s] [75/120] cumulate gettext-runtime-0.21.1-2.19 [ 4s] [76/120] cumulate perl-5.34.0-1.15 [ 4s] [77/120] cumulate gcc-9.2.0-1.14 [ 4s] [78/120] cumulate build-mkbaselibs-20120927-1.2 [ 4s] [79/120] cumulate linux-glibc-devel-3.10-1.19 [ 4s] [80/120] cumulate terminfo-base-full-6.2-1.19 [ 4s] [81/120] cumulate autoconf-2.71-1.19 [ 4s] [82/120] cumulate file-5.44-1.17 [ 4s] [83/120] cumulate glibc-locale-2.30-1.9 [ 4s] [84/120] cumulate tar-1.17-1.2 [ 4s] [85/120] cumulate gzip-1.3.12-1.17 [ 4s] [86/120] cumulate pam-1.1.6-1.3 [ 4s] [87/120] cumulate tzdata-2023c-1.3 [ 4s] [88/120] cumulate libdw-0.189-1.19 [ 4s] [89/120] cumulate libxslt-1.1.37-1.3 [ 4s] [90/120] cumulate nss-3.87-2.5 [ 4s] [91/120] cumulate libarchive-3.6.2-1.19 [ 4s] [92/120] cumulate glibc-devel-2.30-1.9 [ 4s] [93/120] cumulate automake-1.16.5-1.19 [ 4s] [94/120] cumulate libasm-0.189-1.19 [ 4s] [95/120] cumulate libxslt-tools-1.1.37-1.3 [ 4s] [96/120] cumulate build-20120927-1.2 [ 4s] [97/120] cumulate libncurses6-6.2-1.19 [ 4s] [98/120] cumulate libsoftokn3-3.87-2.5 [ 4s] [99/120] cumulate rpm-4.14.1.1-1.18 [ 4s] [100/120] cumulate libncurses-6.2-1.19 [ 4s] [101/120] cumulate less-608-1.3 [ 4s] [102/120] cumulate libreadline-5.2-1.16 [ 4s] [103/120] cumulate asan-force-options-9.2.0-2.8 [ 4s] [104/120] cumulate procps-ng-3.3.17-1.3 [ 4s] [105/120] cumulate libtool-2.4.7-1.19 [ 4s] [106/120] cumulate elfutils-0.189-1.19 [ 4s] [107/120] cumulate rpm-build-4.14.1.1-1.18 [ 4s] [108/120] cumulate libxml2-tools-2.10.2-1.16 [ 4s] [109/120] cumulate python-2.7.18-1.19 [ 4s] [110/120] cumulate python3-base-3.11.2-1.16 [ 4s] [111/120] cumulate util-linux-2.37.4-1.6 [ 4s] [112/120] cumulate sgml-skel-0.7.1-1.2 [ 4s] [113/120] cumulate util-linux-su-2.37.4-1.6 [ 4s] [114/120] cumulate python-libxml2-2.10.2-1.3 [ 4s] [115/120] cumulate gettext-tools-0.21.1-2.19 [ 4s] [116/120] cumulate iso_ent-2000.11.03-1.2 [ 4s] [117/120] cumulate itstool-2.0.7-1.2 [ 4s] [118/120] cumulate xmlcharent-0.3-405.2 [ 4s] [119/120] cumulate docbook_4-4.5-1.2 [ 4s] [120/120] cumulate docbook-xsl-stylesheets-1.79.2-1.2 [ 4s] now installing cumulated packages [ 5s] Preparing... ######################################## [ 5s] Updating / installing... [ 5s] asan-runtime-env-9.2.0-2.8 ######################################## [ 5s] setup-0.9-1.5 ######################################## [ 5s] filesystem-3.1-1.2 ######################################## [ 6s] glibc-2.30-1.9 ######################################## [ 6s] libgcc-9.2.0-1.14 ######################################## [ 6s] libstdc++-9.2.0-1.14 ######################################## [ 7s] libasan-9.2.0-1.14 ######################################## [ 7s] libmagic-data-5.44-1.17 ######################################## [ 7s] bash-3.2.57-1.7 ######################################## [ 7s] zlib-1.2.13-1.17 ######################################## [ 7s] liblzma-5.4.0-1.19 ######################################## [ 8s] coreutils-6.9-14.10 ######################################## [ 8s] libxml2-2.10.2-1.16 ######################################## [ 8s] libbz2-1.0.8-1.17 ######################################## [ 8s] libelf-0.189-1.19 ######################################## [ 9s] libdw-0.189-1.19 ######################################## [ 9s] libmagic-5.44-1.17 ######################################## [ 9s] gawk-3.1.5-1.3 ######################################## [ 9s] libblkid-2.37.4-1.6 ######################################## [ 9s] nspr-4.35-1.16 ######################################## [ 9s] sed-4.1c-1.3 ######################################## [ 9s] libopenssl11-1.1.1u-1.19 ######################################## [ 10s] libsqlite-3.40.1-1.16 ######################################## [ 10s] pam-1.1.6-1.3 ######################################## [ 10s] gdbm-1.8.3-1.19 ######################################## [ 12s] perl-5.34.0-1.15 ######################################## [ 12s] libcap-2.24-1.17 ######################################## [ 12s] libfreebl3-3.87-2.5 ######################################## [ 12s] libgpg-error-1.46-1.3 ######################################## [ 13s] liblua-5.1.5-1.16 ######################################## [ 13s] libpopt-1.16-1.16 ######################################## [ 13s] libpython-2.7.18-1.19 ######################################## [ 13s] libuuid-2.37.4-1.6 ######################################## [ 13s] libzstd1-1.5.2-1.16 ######################################## [ 14s] binutils-2.33.1-1.17 ######################################## [ 14s] libquadmath-9.2.0-1.14 ######################################## [ 14s] build-mkbaselibs-20120927-1.2 ######################################## [ 14s] linux-glibc-devel-3.10-1.19 ######################################## [ 15s] terminfo-base-full-6.2-1.19 ######################################## [ 15s] libncurses6-6.2-1.19 ######################################## [ 15s] libreadline-5.2-1.16 ######################################## [ 15s] libxml2-tools-2.10.2-1.16 ######################################## [ 15s] sgml-skel-0.7.1-1.2 ######################################## [ 15s] iso_ent-2000.11.03-1.2 ######################################## [ 16s] glibc-devel-2.30-1.9 ######################################## [ 16s] libgfortran-9.2.0-1.14 ######################################## [ 16s] libfdisk-2.37.4-1.6 ######################################## [ 16s] libgcrypt-1.10.1-1.3 ######################################## [ 16s] libxslt-1.1.37-1.3 ######################################## [ 17s] nss-certs-3.87-2.5 ######################################## [ 17s] libsoftokn3-3.87-2.5 ######################################## [ 17s] nss-3.87-2.5 ######################################## [ 17s] libmount-2.37.4-1.6 ######################################## [ 17s] libasm-0.189-1.19 ######################################## [ 17s] bzip2-1.0.8-1.17 ######################################## [ 17s] gzip-1.3.12-1.17 ######################################## [ 17s] xz-5.4.0-1.19 ######################################## [ 17s] make-4.3-1.16 ######################################## [ 17s] gettext-runtime-0.21.1-2.19 ######################################## [ 18s] findutils-4.3.8-1.17 ######################################## [ 18s] libattr-2.5.1-1.18 ######################################## [ 18s] libacl-2.2.53-1.18 ######################################## [ 18s] tar-1.17-1.2 ######################################## [ 18s] libarchive-3.6.2-1.19 ######################################## [ 20s] rpm-4.14.1.1-1.18 ######################################## [ 20s] libffi-3.4.2-1.17 ######################################## [ 20s] libltdl-2.4.7-1.19 ######################################## [ 21s] libpcre-8.45-1.8 ######################################## [ 21s] grep-2.5.2-1.3 ######################################## [ 21s] xmlcharent-0.3-405.2 ######################################## [ 21s] docbook_4-4.5-1.2 ######################################## [ 22s] libpython3_111_0-3.11.2-1.16 ######################################## [ 23s] libsmack-1.3.1-1.16 ######################################## [ 23s] libsmartcols-2.37.4-1.6 ######################################## [ 24s] util-linux-2.37.4-1.6 ######################################## [ 24s] m4-1.4.19-1.3 ######################################## [ 24s] autoconf-2.71-1.19 ######################################## [ 25s] automake-1.16.5-1.19 ######################################## [ 25s] patch-2.7.6-1.16 ######################################## [ 25s] libexpat-2.4.1-1.18 ######################################## [ 25s] db4-4.8.30.NC-1.17 ######################################## [ 26s] python-2.7.18-1.19 ######################################## [ 27s] python-libxml2-2.10.2-1.3 ######################################## [ 27s] libcc1-9.2.0-1.14 ######################################## [ 27s] libubsan-9.2.0-1.14 ######################################## [ 27s] libatomic-9.2.0-1.14 ######################################## [ 28s] libgomp-9.2.0-1.14 ######################################## [ 28s] libitm-9.2.0-1.14 ######################################## [ 28s] itstool-2.0.7-1.2 ######################################## [ 29s] docbook-xsl-stylesheets-1.79.2-1.2 ######################################## [ 29s] libtool-2.4.7-1.19 ######################################## [ 29s] build-20120927-1.2 ######################################## [ 29s] libncurses-6.2-1.19 ######################################## [ 29s] build-compare-2015.04.28-1.10 ######################################## [ 29s] asan-build-env-9.2.0-2.8 ######################################## [ 29s] `/etc/ld.so.preload' -> `/etc/ld.so.preload.orig' [ 29s] libstdc++-devel-9.2.0-1.14 ######################################## [ 30s] gcc-9.2.0-1.14 ######################################## [ 30s] asan-force-options-9.2.0-2.8 ######################################## [ 30s] /usr/bin [ 30s] rpm-build-4.14.1.1-1.18 ######################################## [ 30s] gettext-tools-0.21.1-2.19 ######################################## [ 31s] python3-base-3.11.2-1.16 ######################################## [ 31s] util-linux-su-2.37.4-1.6 ######################################## [ 31s] smack-1.3.1-1.16 ######################################## [ 31s] elfutils-0.189-1.19 ######################################## [ 31s] libxslt-tools-1.1.37-1.3 ######################################## [ 31s] less-608-1.3 ######################################## [ 32s] procps-ng-3.3.17-1.3 ######################################## [ 32s] file-5.44-1.17 ######################################## [ 32s] glibc-locale-2.30-1.9 ######################################## [ 32s] tzdata-2023c-1.3 ######################################## [ 33s] cpp-9.2.0-1.14 ######################################## [ 33s] gcc-c++-9.2.0-1.14 ######################################## [ 33s] cpio-2.8-1.3 ######################################## [ 33s] hostname-3.23-1.3 ######################################## [ 33s] libext2fs-1.46.0-1.17 ######################################## [ 34s] net-tools-2.0_20121208git-1.3 ######################################## [ 34s] pkg-config-0.29.2-1.16 ######################################## [ 34s] update-alternatives-1.21.18-1.3 ######################################## [ 34s] which-2.17-1.3 ######################################## [ 34s] diffutils-3.8-1.3 ######################################## [ 36s] now finalizing build dir... [ 37s] ----------------------------------------------------------------- [ 37s] I have the following modifications for gtk-doc.spec: [ 37s] 4c4 [ 37s] < Release: 0 [ 37s] --- [ 37s] > Release: 1.2 [ 37s] 17c17 [ 37s] < BuildRequires: gettext [ 37s] --- [ 37s] > BuildRequires: gettext-tools [ 37s] build target is i686-tizen-linux [ 37s] ----------------------------------------------------------------- [ 37s] ----- building gtk-doc.spec (user abuild) [ 37s] ----------------------------------------------------------------- [ 37s] ----------------------------------------------------------------- [ 38s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=i686-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc' /home/abuild/rpmbuild/SOURCES/gtk-doc.spec [ 38s] Building target platforms: i686-tizen-linux [ 38s] Building for target i686-tizen-linux [ 38s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Jeb9gt [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + rm -rf gtk-doc-1.33.2 [ 38s] + /bin/xz -dc /home/abuild/rpmbuild/SOURCES/gtk-doc-1.33.2.tar.xz [ 38s] + /bin/tar -xof - [ 38s] + STATUS=0 [ 38s] + '[' 0 -ne 0 ']' [ 38s] + cd gtk-doc-1.33.2 [ 38s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 38s] + exit 0 [ 38s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.XvtSYs [ 38s] + umask 022 [ 38s] + cd /home/abuild/rpmbuild/BUILD [ 38s] + cd gtk-doc-1.33.2 [ 38s] ++ uname -m [ 38s] + [[ i686 == \a\a\r\c\h\6\4 ]] [ 38s] + LANG=C [ 38s] + export LANG [ 38s] + unset DISPLAY [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + LDFLAGS= [ 38s] + export LDFLAGS [ 38s] + AR=gcc-ar [ 38s] + export AR [ 38s] + NM=/bin/nm [ 38s] + export NM [ 38s] + RANLIB=gcc-ranlib [ 38s] + export RANLIB [ 38s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 38s] + export CFLAGS [ 38s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 38s] + export CXXFLAGS [ 38s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 38s] + export FFLAGS [ 38s] + ./autogen.sh --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 38s] autoreconf: export WARNINGS= [ 38s] autoreconf: Entering directory '.' [ 38s] autoreconf: configure.ac: not using Gettext [ 39s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 43s] autoreconf: configure.ac: tracing [ 45s] autoreconf: configure.ac: creating directory build-aux [ 45s] autoreconf: running: libtoolize --copy --force [ 45s] libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. [ 45s] libtoolize: copying file 'build-aux/ltmain.sh' [ 45s] libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. [ 45s] libtoolize: copying file 'm4/libtool.m4' [ 46s] libtoolize: copying file 'm4/ltoptions.m4' [ 46s] libtoolize: copying file 'm4/ltsugar.m4' [ 46s] libtoolize: copying file 'm4/ltversion.m4' [ 46s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 46s] autoreconf: configure.ac: not using Intltool [ 46s] autoreconf: configure.ac: not using Gtkdoc [ 46s] autoreconf: running: aclocal --force -I m4 ${ACLOCAL_FLAGS} [ 50s] autoreconf: running: /usr/bin/autoconf --force [ 52s] autoreconf: configure.ac: not using Autoheader [ 52s] autoreconf: running: automake --add-missing --copy --force-missing [ 55s] configure.ac:23: installing 'build-aux/compile' [ 55s] configure.ac:27: installing 'build-aux/config.guess' [ 55s] configure.ac:27: installing 'build-aux/config.sub' [ 55s] configure.ac:14: installing 'build-aux/install-sh' [ 55s] configure.ac:14: installing 'build-aux/missing' [ 55s] Makefile.am: installing './INSTALL' [ 55s] parallel-tests: installing 'build-aux/test-driver' [ 55s] tests/annotations/src/Makefile.am: installing 'build-aux/depcomp' [ 57s] autoreconf: Leaving directory '.' [ 57s] checking for a BSD-compatible install... /bin/install -c [ 57s] checking whether build environment is sane... yes [ 58s] checking for a race-free mkdir -p... /bin/mkdir -p [ 58s] checking for gawk... gawk [ 58s] checking whether make sets $(MAKE)... yes [ 58s] checking whether make supports nested variables... yes [ 58s] checking whether UID '399' is supported by ustar format... yes [ 58s] checking whether GID '399' is supported by ustar format... yes [ 58s] checking how to create a ustar tar archive... gnutar [ 58s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 58s] checking whether make supports nested variables... (cached) yes [ 58s] checking for i686-tizen-linux-gnu-gcc... no [ 58s] checking for gcc... gcc [ 58s] checking whether the C compiler works... yes [ 58s] checking for C compiler default output file name... a.out [ 58s] checking for suffix of executables... [ 59s] checking whether we are cross compiling... no [ 59s] checking for suffix of object files... o [ 59s] checking whether the compiler supports GNU C... yes [ 59s] checking whether gcc accepts -g... yes [ 59s] checking for gcc option to enable C11 features... none needed [ 59s] checking whether gcc understands -c and -o together... yes [ 59s] checking whether make supports the include directive... yes (GNU style) [ 59s] checking dependency style of gcc... gcc3 [ 59s] checking build system type... i686-tizen-linux-gnu [ 59s] checking host system type... i686-tizen-linux-gnu [ 59s] checking how to print strings... printf [ 59s] checking for a sed that does not truncate output... /bin/sed [ 59s] checking for grep that handles long lines and -e... /bin/grep [ 59s] checking for egrep... /bin/grep -E [ 59s] checking for fgrep... /bin/grep -F [ 60s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 60s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 60s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 60s] checking the name lister (/bin/nm) interface... BSD nm [ 60s] checking whether ln -s works... yes [ 60s] checking the maximum length of command line arguments... 1572864 [ 60s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 60s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 60s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 60s] checking for i686-tizen-linux-gnu-file... no [ 60s] checking for file... file [ 60s] checking for i686-tizen-linux-gnu-objdump... no [ 60s] checking for objdump... objdump [ 60s] checking how to recognize dependent libraries... pass_all [ 60s] checking for i686-tizen-linux-gnu-dlltool... no [ 60s] checking for dlltool... no [ 60s] checking how to associate runtime and link libraries... printf %s\n [ 60s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 60s] checking for archiver @FILE support... @ [ 60s] checking for i686-tizen-linux-gnu-strip... no [ 60s] checking for strip... strip [ 60s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 60s] checking command to parse /bin/nm output from gcc object... ok [ 60s] checking for sysroot... no [ 60s] checking for a working dd... /bin/dd [ 60s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 60s] checking for i686-tizen-linux-gnu-mt... no [ 60s] checking for mt... no [ 60s] checking if : is a manifest tool... no [ 60s] checking for stdio.h... yes [ 61s] checking for stdlib.h... yes [ 61s] checking for string.h... yes [ 61s] checking for inttypes.h... yes [ 61s] checking for stdint.h... yes [ 61s] checking for strings.h... yes [ 61s] checking for sys/stat.h... yes [ 61s] checking for sys/types.h... yes [ 61s] checking for unistd.h... yes [ 61s] checking for dlfcn.h... yes [ 61s] checking for objdir... .libs [ 62s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 62s] checking for gcc option to produce PIC... -fPIC -DPIC [ 62s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 62s] checking if gcc static flag -static works... no [ 62s] checking if gcc supports -c -o file.o... yes [ 62s] checking if gcc supports -c -o file.o... (cached) yes [ 62s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 62s] checking whether -lc should be explicitly linked in... no [ 63s] checking dynamic linker characteristics... GNU/Linux ld.so [ 63s] checking how to hardcode library paths into programs... immediate [ 63s] checking whether stripping libraries is possible... yes [ 63s] checking if libtool supports shared libraries... yes [ 63s] checking whether to build shared libraries... yes [ 63s] checking whether to build static libraries... yes [ 63s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 63s] checking pkg-config is at least version 0.19... yes [ 63s] checking for a Python interpreter with version >= 3.2... python3 [ 63s] checking for python3... /bin/python3 [ 63s] checking for python3 version... 3.11 [ 63s] checking for python3 platform... linux [ 63s] checking for GNU default python3 prefix... ${prefix} [ 63s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 63s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 63s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages [ 63s] checking for xsltproc... /bin/xsltproc [ 63s] checking for dblatex... no [ 63s] checking for fop... no [ 63s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 63s] checking for XML catalog... /etc/xml/catalog [ 63s] checking for xmlcatalog... /bin/xmlcatalog [ 63s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 63s] checking for DocBook XSL Stylesheets in XML catalog... found [ 63s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 63s] checking whether to enable runtime debugging code... no [ 63s] checking whether date can output nanoseconds... yes [ 63s] checking whether date can format dates... yes [ 63s] checking for yelp-tools... no [ 63s] checking python3 module: "pygments"... no [ 64s] checking that generated files are newer than configure... done [ 64s] configure: creating ./config.status [ 65s] config.status: creating Makefile [ 65s] config.status: creating gtk-doc.pc [ 65s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 65s] config.status: creating buildsystems/autotools/Makefile [ 65s] config.status: creating buildsystems/cmake/Makefile [ 65s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 65s] config.status: creating gtkdoc/config_data.py [ 65s] config.status: creating help/Makefile [ 66s] config.status: creating help/manual/Makefile [ 66s] config.status: creating tests/Makefile [ 66s] config.status: creating tests/annotations/Makefile [ 66s] config.status: creating tests/annotations/src/Makefile [ 66s] config.status: creating tests/annotations/docs/Makefile [ 66s] config.status: creating tests/bugs/Makefile [ 66s] config.status: creating tests/bugs/src/Makefile [ 66s] config.status: creating tests/bugs/docs/Makefile [ 66s] config.status: creating tests/empty/Makefile [ 66s] config.status: creating tests/empty/src/Makefile [ 66s] config.status: creating tests/empty/docs/Makefile [ 66s] config.status: creating tests/fail/Makefile [ 66s] config.status: creating tests/fail/src/Makefile [ 66s] config.status: creating tests/fail/docs/Makefile [ 67s] config.status: creating tests/gobject/Makefile [ 67s] config.status: creating tests/gobject/src/Makefile [ 67s] config.status: creating tests/gobject/docs/Makefile [ 67s] config.status: creating tests/program/Makefile [ 67s] config.status: creating tests/program/src/Makefile [ 67s] config.status: creating tests/program/docs/Makefile [ 67s] config.status: creating tests/repro/Makefile [ 67s] config.status: creating tests/repro/src/Makefile [ 67s] config.status: creating tests/repro/docs/Makefile [ 67s] config.status: creating gtkdoc-check [ 67s] config.status: creating gtkdoc-depscan [ 67s] config.status: creating gtkdoc-fixxref [ 67s] config.status: creating gtkdoc-mkdb [ 68s] config.status: creating gtkdoc-mkhtml [ 68s] config.status: creating gtkdoc-mkhtml2 [ 68s] config.status: creating gtkdoc-mkman [ 68s] config.status: creating gtkdoc-mkpdf [ 68s] config.status: creating gtkdoc-rebase [ 68s] config.status: creating gtkdoc-scan [ 68s] config.status: creating gtkdoc-scangobj [ 68s] config.status: creating buildsystems/autotools/gtkdocize [ 68s] config.status: creating tests/tools.sh [ 68s] config.status: executing depfiles commands [ 69s] config.status: executing libtool commands [ 69s] configure: [ 69s] gtk-doc was configured with the following options: [ 69s] ================================================== [ 69s] configure: PDF support disabled, no dblatex or fop available [ 69s] configure: Skipping regression tests [ 69s] configure: Debug tracing disabled [ 69s] configure: Documentation disabled [ 70s] + AR=gcc-ar [ 70s] + export AR [ 70s] + NM=/bin/nm [ 70s] + export NM [ 70s] + RANLIB=gcc-ranlib [ 70s] + export RANLIB [ 70s] + CFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 70s] + export CFLAGS [ 70s] + CXXFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g' [ 70s] + export CXXFLAGS [ 70s] + FFLAGS='-O2 -g2 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m32 -march=i686 -mtune=i686 -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -mstackrealign -Wl,-z,noseparate-code -g -I%_fmoddir' [ 70s] + export FFLAGS [ 70s] + ./configure --build=i686-tizen-linux-gnu --host=i686-tizen-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-scrollkeeper [ 70s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 70s] checking for a BSD-compatible install... /bin/install -c [ 70s] checking whether build environment is sane... yes [ 70s] checking for a race-free mkdir -p... /bin/mkdir -p [ 70s] checking for gawk... gawk [ 70s] checking whether make sets $(MAKE)... yes [ 70s] checking whether make supports nested variables... yes [ 70s] checking whether UID '399' is supported by ustar format... yes [ 70s] checking whether GID '399' is supported by ustar format... yes [ 70s] checking how to create a ustar tar archive... gnutar [ 70s] checking whether to enable maintainer-specific portions of Makefiles... yes [ 70s] checking whether make supports nested variables... (cached) yes [ 70s] checking for i686-tizen-linux-gnu-gcc... no [ 70s] checking for gcc... gcc [ 71s] checking whether the C compiler works... yes [ 71s] checking for C compiler default output file name... a.out [ 71s] checking for suffix of executables... [ 71s] checking whether we are cross compiling... no [ 71s] checking for suffix of object files... o [ 71s] checking whether the compiler supports GNU C... yes [ 71s] checking whether gcc accepts -g... yes [ 72s] checking for gcc option to enable C11 features... none needed [ 72s] checking whether gcc understands -c and -o together... yes [ 72s] checking whether make supports the include directive... yes (GNU style) [ 72s] checking dependency style of gcc... gcc3 [ 72s] checking build system type... i686-tizen-linux-gnu [ 72s] checking host system type... i686-tizen-linux-gnu [ 72s] checking how to print strings... printf [ 72s] checking for a sed that does not truncate output... /bin/sed [ 72s] checking for grep that handles long lines and -e... /bin/grep [ 72s] checking for egrep... /bin/grep -E [ 72s] checking for fgrep... /bin/grep -F [ 72s] checking for ld used by gcc... /usr/i586-tizen-linux-gnu/bin/ld [ 72s] checking if the linker (/usr/i586-tizen-linux-gnu/bin/ld) is GNU ld... yes [ 72s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 72s] checking the name lister (/bin/nm) interface... BSD nm [ 72s] checking whether ln -s works... yes [ 72s] checking the maximum length of command line arguments... 1572864 [ 72s] checking how to convert i686-tizen-linux-gnu file names to i686-tizen-linux-gnu format... func_convert_file_noop [ 72s] checking how to convert i686-tizen-linux-gnu file names to toolchain format... func_convert_file_noop [ 72s] checking for /usr/i586-tizen-linux-gnu/bin/ld option to reload object files... -r [ 72s] checking for i686-tizen-linux-gnu-file... no [ 72s] checking for file... file [ 72s] checking for i686-tizen-linux-gnu-objdump... no [ 72s] checking for objdump... objdump [ 72s] checking how to recognize dependent libraries... pass_all [ 72s] checking for i686-tizen-linux-gnu-dlltool... no [ 72s] checking for dlltool... no [ 72s] checking how to associate runtime and link libraries... printf %s\n [ 72s] checking for i686-tizen-linux-gnu-ar... gcc-ar [ 72s] checking for archiver @FILE support... @ [ 72s] checking for i686-tizen-linux-gnu-strip... no [ 72s] checking for strip... strip [ 72s] checking for i686-tizen-linux-gnu-ranlib... gcc-ranlib [ 73s] checking command to parse /bin/nm output from gcc object... ok [ 73s] checking for sysroot... no [ 73s] checking for a working dd... /bin/dd [ 73s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 73s] checking for i686-tizen-linux-gnu-mt... no [ 73s] checking for mt... no [ 73s] checking if : is a manifest tool... no [ 73s] checking for stdio.h... yes [ 73s] checking for stdlib.h... yes [ 73s] checking for string.h... yes [ 73s] checking for inttypes.h... yes [ 73s] checking for stdint.h... yes [ 73s] checking for strings.h... yes [ 73s] checking for sys/stat.h... yes [ 74s] checking for sys/types.h... yes [ 74s] checking for unistd.h... yes [ 74s] checking for dlfcn.h... yes [ 74s] checking for objdir... .libs [ 74s] checking if gcc supports -fno-rtti -fno-exceptions... no [ 74s] checking for gcc option to produce PIC... -fPIC -DPIC [ 74s] checking if gcc PIC flag -fPIC -DPIC works... yes [ 75s] checking if gcc static flag -static works... no [ 75s] checking if gcc supports -c -o file.o... yes [ 75s] checking if gcc supports -c -o file.o... (cached) yes [ 75s] checking whether the gcc linker (/usr/i586-tizen-linux-gnu/bin/ld) supports shared libraries... yes [ 75s] checking whether -lc should be explicitly linked in... no [ 75s] checking dynamic linker characteristics... GNU/Linux ld.so [ 75s] checking how to hardcode library paths into programs... immediate [ 75s] checking whether stripping libraries is possible... yes [ 75s] checking if libtool supports shared libraries... yes [ 75s] checking whether to build shared libraries... yes [ 75s] checking whether to build static libraries... yes [ 75s] checking for i686-tizen-linux-gnu-pkg-config... /bin/i686-tizen-linux-gnu-pkg-config [ 75s] checking pkg-config is at least version 0.19... yes [ 75s] checking for a Python interpreter with version >= 3.2... python3 [ 75s] checking for python3... /bin/python3 [ 75s] checking for python3 version... 3.11 [ 75s] checking for python3 platform... linux [ 75s] checking for GNU default python3 prefix... ${prefix} [ 75s] checking for GNU default python3 exec_prefix... ${exec_prefix} [ 76s] checking for python3 script directory (pythondir)... ${PYTHON_PREFIX}/lib/python3.11/site-packages [ 76s] checking for python3 extension module directory (pyexecdir)... ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages [ 76s] checking for xsltproc... /bin/xsltproc [ 76s] checking for dblatex... no [ 76s] checking for fop... no [ 76s] configure: WARNING: neither dblatex nor fop found, so no pdf output from xml [ 76s] checking for XML catalog... /etc/xml/catalog [ 76s] checking for xmlcatalog... /bin/xmlcatalog [ 76s] checking for DocBook XML DTD V4.3 in XML catalog... found [ 76s] checking for DocBook XSL Stylesheets in XML catalog... found [ 76s] checking for glib-2.0 >= 2.6.0 gobject-2.0 >= 2.6.0... no [ 76s] checking whether to enable runtime debugging code... no [ 76s] checking whether date can output nanoseconds... yes [ 76s] checking whether date can format dates... yes [ 76s] checking for yelp-tools... no [ 76s] checking python3 module: "pygments"... no [ 76s] checking that generated files are newer than configure... done [ 76s] configure: creating ./config.status [ 78s] config.status: creating Makefile [ 78s] config.status: creating gtk-doc.pc [ 78s] config.status: WARNING: 'gtk-doc.pc.in' seems to ignore the --datarootdir setting [ 78s] config.status: creating buildsystems/autotools/Makefile [ 78s] config.status: creating buildsystems/cmake/Makefile [ 78s] config.status: creating buildsystems/cmake/GtkDocConfigVersion.cmake [ 78s] config.status: creating gtkdoc/config_data.py [ 78s] config.status: creating help/Makefile [ 78s] config.status: creating help/manual/Makefile [ 78s] config.status: creating tests/Makefile [ 78s] config.status: creating tests/annotations/Makefile [ 78s] config.status: creating tests/annotations/src/Makefile [ 79s] config.status: creating tests/annotations/docs/Makefile [ 79s] config.status: creating tests/bugs/Makefile [ 79s] config.status: creating tests/bugs/src/Makefile [ 79s] config.status: creating tests/bugs/docs/Makefile [ 79s] config.status: creating tests/empty/Makefile [ 79s] config.status: creating tests/empty/src/Makefile [ 79s] config.status: creating tests/empty/docs/Makefile [ 79s] config.status: creating tests/fail/Makefile [ 79s] config.status: creating tests/fail/src/Makefile [ 79s] config.status: creating tests/fail/docs/Makefile [ 79s] config.status: creating tests/gobject/Makefile [ 79s] config.status: creating tests/gobject/src/Makefile [ 79s] config.status: creating tests/gobject/docs/Makefile [ 80s] config.status: creating tests/program/Makefile [ 80s] config.status: creating tests/program/src/Makefile [ 80s] config.status: creating tests/program/docs/Makefile [ 80s] config.status: creating tests/repro/Makefile [ 80s] config.status: creating tests/repro/src/Makefile [ 80s] config.status: creating tests/repro/docs/Makefile [ 80s] config.status: creating gtkdoc-check [ 80s] config.status: creating gtkdoc-depscan [ 80s] config.status: creating gtkdoc-fixxref [ 80s] config.status: creating gtkdoc-mkdb [ 80s] config.status: creating gtkdoc-mkhtml [ 80s] config.status: creating gtkdoc-mkhtml2 [ 80s] config.status: creating gtkdoc-mkman [ 80s] config.status: creating gtkdoc-mkpdf [ 80s] config.status: creating gtkdoc-rebase [ 80s] config.status: creating gtkdoc-scan [ 81s] config.status: creating gtkdoc-scangobj [ 81s] config.status: creating buildsystems/autotools/gtkdocize [ 81s] config.status: creating tests/tools.sh [ 81s] config.status: executing depfiles commands [ 81s] config.status: executing libtool commands [ 81s] configure: WARNING: unrecognized options: --disable-scrollkeeper [ 81s] configure: [ 81s] gtk-doc was configured with the following options: [ 81s] ================================================== [ 81s] configure: PDF support disabled, no dblatex or fop available [ 81s] configure: Skipping regression tests [ 81s] configure: Debug tracing disabled [ 81s] configure: Documentation disabled [ 82s] + /bin/make -j12 [ 82s] git.mk: Generating .gitignore [ 82s] Making all in buildsystems/autotools [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 82s] git.mk: Generating .gitignore [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 82s] Making all in buildsystems/cmake [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 82s] git.mk: Generating .gitignore [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 82s] Making all in help [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 82s] git.mk: Generating .gitignore [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 82s] git.mk: Generating .gitignore [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 82s] make[2]: Nothing to be done for 'all-am'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help/manual' [ 82s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 82s] Making all in tests [ 82s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 82s] git.mk: Generating .gitignore [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 82s] git.mk: Generating .gitignore [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 82s] make[2]: Nothing to be done for 'all-am'. [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 82s] git.mk: Generating .gitignore [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/src' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 82s] git.mk: Generating .gitignore [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations/docs' [ 82s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/annotations' [ 82s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 82s] git.mk: Generating .gitignore [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 82s] git.mk: Generating .gitignore [ 82s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/src' [ 82s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 82s] git.mk: Generating .gitignore [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs/docs' [ 83s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/bugs' [ 83s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 83s] git.mk: Generating .gitignore [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 83s] git.mk: Generating .gitignore [ 83s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/src' [ 83s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 83s] make[3]: warning: -j1 forced in makefile: resetting jobserver mode. [ 83s] git.mk: Generating .gitignore [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty/docs' [ 84s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/empty' [ 84s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 84s] git.mk: Generating .gitignore [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 84s] git.mk: Generating .gitignore [ 84s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/src' [ 84s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 84s] git.mk: Generating .gitignore [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail/docs' [ 85s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/fail' [ 85s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 85s] git.mk: Generating .gitignore [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 85s] git.mk: Generating .gitignore [ 85s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/src' [ 85s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 85s] git.mk: Generating .gitignore [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject/docs' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/gobject' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 86s] git.mk: Generating .gitignore [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 86s] git.mk: Generating .gitignore [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/src' [ 86s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 86s] git.mk: Generating .gitignore [ 86s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program/docs' [ 86s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/program' [ 86s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 86s] git.mk: Generating .gitignore [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 87s] git.mk: Generating .gitignore [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/src' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 87s] git.mk: Generating .gitignore [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro/docs' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests/repro' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 87s] make[1]: Nothing to be done for 'all-am'. [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 87s] + exit 0 [ 87s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vEBy2r [ 87s] + umask 022 [ 87s] + cd /home/abuild/rpmbuild/BUILD [ 87s] + cd gtk-doc-1.33.2 [ 87s] + LANG=C [ 87s] + export LANG [ 87s] + unset DISPLAY [ 87s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 [ 87s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 [ 87s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 install [ 87s] Making install in buildsystems/autotools [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/bin' [ 87s] /bin/install -c gtkdocize '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/bin' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/aclocal' [ 87s] /bin/install -c -m 644 gtk-doc.m4 '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/aclocal' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/data' [ 87s] /bin/install -c -m 644 gtk-doc.make gtk-doc.flat.make gtk-doc.no-xslt.make gtk-doc.no-xslt-flat.make '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/data' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/autotools' [ 87s] Making install in buildsystems/cmake [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 87s] make[2]: Nothing to be done for 'install-exec-am'. [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/cmake/GtkDoc' [ 87s] /bin/install -c -m 644 GtkDocConfig.cmake GtkDocConfigVersion.cmake GtkDocScanGObjWrapper.cmake '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/cmake/GtkDoc' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/buildsystems/cmake' [ 87s] Making install in help [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/help' [ 87s] Making install in tests [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[3]: Nothing to be done for 'install-exec-am'. [ 87s] make[3]: Nothing to be done for 'install-data-am'. [ 87s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/tests' [ 87s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 87s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 87s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/bin' [ 87s] /bin/install -c gtkdoc-check gtkdoc-depscan gtkdoc-fixxref gtkdoc-mkdb gtkdoc-mkhtml gtkdoc-mkhtml2 gtkdoc-mkman gtkdoc-mkpdf gtkdoc-rebase gtkdoc-scan gtkdoc-scangobj '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/bin' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/data' [ 88s] /bin/install -c -m 644 gtk-doc.xsl version-greater-or-equal.xsl devhelp2.xsd devhelp2.xsl style/home.png style/left.png style/left-insensitive.png style/right.png style/right-insensitive.png style/up.png style/up-insensitive.png style/style.css '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/data' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/pkgconfig' [ 88s] /bin/install -c -m 644 gtk-doc.pc '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/pkgconfig' [ 88s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/python/gtkdoc' [ 88s] /bin/install -c -m 644 gtkdoc/__init__.py gtkdoc/check.py gtkdoc/common.py gtkdoc/config.py gtkdoc/config_data.py gtkdoc/fixxref.py gtkdoc/highlight.py gtkdoc/md_to_db.py gtkdoc/mkdb.py gtkdoc/mkhtml.py gtkdoc/mkhtml2.py gtkdoc/mkman.py gtkdoc/mkpdf.py gtkdoc/rebase.py gtkdoc/scan.py gtkdoc/scangobj.py '/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/gtk-doc/python/gtkdoc' [ 88s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 88s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2' [ 88s] + rm -f /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/info/dir [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 -regex '.*\.la$' [ 88s] + xargs rm -f -- [ 88s] + find /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 -regex '.*\.a$' [ 88s] + xargs rm -f -- [ 88s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/help [ 88s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.33.2-1.2 --unique-debug-src-base gtk-doc-1.33.2-1.2.i386 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2 [ 88s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debuginfo.manifest [ 88s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/gtk-doc-debugsource.manifest [ 88s] + /usr/lib/rpm/check-buildroot [ 88s] + /usr/lib/rpm//brp-compress [ 88s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 89s] + /usr/lib/rpm/brp-python-hardlink [ 89s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 [ 89s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/isu.list [ 89s] ~/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 89s] ~/rpmbuild/BUILD/gtk-doc-1.33.2 [ 89s] Processing files: gtk-doc-1.33.2-1.2.i686 [ 89s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.93NERs [ 89s] + umask 022 [ 89s] + cd /home/abuild/rpmbuild/BUILD [ 89s] + cd gtk-doc-1.33.2 [ 89s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/licenses/gtk-doc [ 89s] + export LC_ALL=C [ 89s] + LC_ALL=C [ 89s] + export LICENSEDIR [ 89s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/licenses/gtk-doc [ 89s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386/usr/share/licenses/gtk-doc [ 89s] + exit 0 [ 91s] Provides: gtk-doc = 1.33.2-1.2 gtk-doc(x86-32) = 1.33.2-1.2 pkgconfig(gtk-doc) = 1.33.1 [ 91s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 91s] Requires: /bin/python3 /bin/sh /usr/bin/pkg-config [ 91s] Processing files: gtk-doc-debugsource-1.33.2-1.2.i686 [ 91s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/gtk-doc-1.33.2/debugsourcefiles.list [ 91s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 91s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 91s] [ 91s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 [ 91s] Wrote: /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gtk-doc-1.33.2-1.2.i686.rpm [ 91s] Wrote: /home/abuild/rpmbuild/RPMS/i686/gtk-doc-debugsource-1.33.2-1.2.i686.rpm [ 91s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.t2i1wu [ 91s] + umask 022 [ 91s] + cd /home/abuild/rpmbuild/BUILD [ 91s] + cd gtk-doc-1.33.2 [ 91s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/gtk-doc-1.33.2-1.2.i386 [ 91s] + exit 0 [ 91s] ... checking for files with abuild user/group [ 91s] ... creating baselibs [ 92s] ... comparing built packages with the former built [ 92s] /usr/lib/build/pkg-diff.sh [ 92s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.src.rpm /home/abuild/rpmbuild/SRPMS/gtk-doc-1.33.2-1.2.src.rpm [ 92s] This is not a prerelease project. Compare the project name. [ 92s] comparing rpmtags [ 92s] comparing RELEASE [ 92s] comparing PROVIDES [ 92s] comparing scripts [ 92s] comparing filelist [ 92s] comparing file checksum [ 92s] RPM meta information is identical [ 92s] compare /.build.oldpackages/gtk-doc-1.33.2-1.1.i686.rpm /home/abuild/rpmbuild/RPMS/i686/gtk-doc-1.33.2-1.2.i686.rpm [ 93s] Comparing gtk-doc-1.33.2-1.1.i686.rpm to gtk-doc-1.33.2-1.2.i686.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] --- /tmp/tmp.ypDf770534/tmp.TpKE770606 2023-10-06 13:23:07.143755614 +0900 [ 93s] +++ /tmp/tmp.ypDf770534/tmp.CRyS770610 2023-10-06 13:23:07.163755613 +0900 [ 93s] @@ -8,7 +8,7 @@ [ 93s] GPL-2.0+ GPL-2.0+ [ 93s] Productivity/Publishing/SGML http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 93s] (none) 4.14.1 i686-tizen-linux [ 93s] - cpio xz 5T [ 93s] + cpio zstd 9 [ 93s] [ 93s] (none) (none) (none) [ 93s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 93s] RPM meta information is different [ 93s] compare /.build.oldpackages/gtk-doc-debugsource-1.33.2-1.1.i686.rpm /home/abuild/rpmbuild/RPMS/i686/gtk-doc-debugsource-1.33.2-1.2.i686.rpm [ 93s] Comparing gtk-doc-debugsource-1.33.2-1.1.i686.rpm to gtk-doc-debugsource-1.33.2-1.2.i686.rpm [ 93s] This is not a prerelease project. Compare the project name. [ 93s] comparing rpmtags [ 93s] --- /tmp/tmp.oGCa770797/tmp.WusV770839 2023-10-06 13:23:07.391755606 +0900 [ 93s] +++ /tmp/tmp.oGCa770797/tmp.svhN770844 2023-10-06 13:23:07.415755605 +0900 [ 93s] @@ -7,7 +7,7 @@ [ 93s] GPL-2.0+ GPL-2.0+ [ 93s] Development/Debug http://www.gtk.org/gtk-doc/ (none) (none) (none) [ 93s] (none) 4.14.1 i686-tizen-linux [ 93s] - cpio xz 5T [ 93s] + cpio zstd 9 [ 93s] [ 93s] (none) (none) (none) [ 93s] obs://127.0.0.1/Tizen-Base-ASAN/standard/b4f14cadd1338b1a2d43df612b5ef79f-gtk-doc Tizen-Base-ASAN [ 93s] RPM meta information is different [ 93s] [ 93s] 763f3fd73db9 finished "build gtk-doc.spec" at Fri Oct 6 04:23:07 UTC 2023. [ 93s] Retried build at Mon Nov 27 01:40:16 2023 returned same result, skipped Retried build at Tue Feb 27 06:23:04 2024 returned same result, skipped Retried build at Tue Mar 5 05:37:37 2024 returned same result, skipped Retried build at Fri Mar 8 01:43:54 2024 returned same result, skipped Retried build at Fri Mar 22 09:19:28 2024 returned same result, skipped Retried build at Thu Apr 4 03:00:59 2024 returned same result, skipped Retried build at Fri Apr 19 11:41:30 2024 returned same result, skipped Retried build at Thu May 30 05:19:45 2024 returned same result, skipped Retried build at Wed Jun 19 03:09:34 2024 returned same result, skipped Retried build at Mon Jun 24 03:42:49 2024 returned same result, skipped Retried build at Mon Aug 5 03:34:13 2024 returned same result, skipped Retried build at Tue Aug 6 11:38:21 2024 returned same result, skipped Retried build at Thu Aug 22 08:17:05 2024 returned same result, skipped Retried build at Mon Sep 9 03:13:50 2024 returned same result, skipped Retried build at Mon Oct 28 02:56:45 2024 returned same result, skipped