[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] 32daa65e5312 started "build autoconf213.spec" at Thu Jul 24 12:26:26 UTC 2025. [ 1s] [ 1s] Building autoconf213 for project 'Tizen-Base-Dev' repository 'standard' arch 'armv7l' srcmd5 '259021431be8b5acdb85bd696e6b7a42' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/autoconf213.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/autoconf213.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/autoconf213.spec build ... [ 40s] registering binfmt handlers for cross build [ 40s] cycle: nss -> libsoftokn3 [ 40s] breaking dependency nss -> libsoftokn3 [ 40s] [1/43] preinstalling libmagic-data... [ 41s] [2/43] preinstalling libncurses... [ 41s] [3/43] preinstalling setup... [ 41s] [4/43] preinstalling filesystem... [ 41s] [5/43] preinstalling glibc... [ 41s] [6/43] preinstalling libgcc... [ 41s] [7/43] preinstalling bash... [ 41s] [8/43] preinstalling diffutils... [ 41s] [9/43] preinstalling grep... [ 41s] [10/43] preinstalling libattr... [ 41s] [11/43] preinstalling libblkid... [ 41s] [12/43] preinstalling libbz2... [ 41s] [13/43] preinstalling libcap... [ 41s] [14/43] preinstalling libfreebl3... [ 42s] [15/43] preinstalling liblua... [ 42s] [16/43] preinstalling liblzma... [ 42s] [17/43] preinstalling libpopt... [ 42s] [18/43] preinstalling libreadline... [ 42s] [19/43] preinstalling libsmack... [ 42s] [20/43] preinstalling libsqlite... [ 42s] [21/43] preinstalling libuuid... [ 42s] [22/43] preinstalling libxcrypt... [ 42s] [23/43] preinstalling libxml2... [ 42s] [24/43] preinstalling libzstd1... [ 42s] [25/43] preinstalling nspr... [ 42s] [26/43] preinstalling sed... [ 42s] [27/43] preinstalling zlib... [ 42s] [28/43] preinstalling clang-accel-x86_64-armv7l... [ 290s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 321s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 338s] [31/43] preinstalling coreutils... [ 338s] [32/43] preinstalling libacl... [ 338s] [33/43] preinstalling libelf... [ 338s] [34/43] preinstalling libmount... [ 338s] [35/43] preinstalling smack... [ 338s] [36/43] preinstalling bzip2... [ 338s] [37/43] preinstalling libmagic... [ 338s] [38/43] preinstalling tar... [ 338s] [39/43] preinstalling util-linux... [ 339s] [40/43] preinstalling util-linux-su... [ 339s] [41/43] preinstalling nss... [ 339s] [42/43] preinstalling libsoftokn3... [ 339s] [43/43] preinstalling rpm... [ 340s] running qemu-linux-user-x86_64-cross postinstall script [ 340s] running qemu-accel-x86_64-armv7l postinstall script [ 340s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 340s] running clang-accel-x86_64-armv7l postinstall script [ 340s] running setup postinstall script [ 340s] chroot: failed to run command '': No such file or directory [ 340s] initializing rpm db... [ 341s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 341s] breaking dependency libxcrypt-devel -> glibc-devel [ 341s] cycle: libsoftokn3 -> nss [ 341s] breaking dependency nss -> libsoftokn3 [ 341s] done [ 341s] querying package ids... [ 342s] [1/101] cumulate libmagic-data-5.45-1.3 [ 342s] [2/101] cumulate setup-0.9-1.3 [ 342s] [3/101] cumulate filesystem-3.1-1.1 [ 342s] [4/101] cumulate glibc-2.40-1.6 [ 342s] [5/101] cumulate libatomic-14.2.0-1.6 [ 342s] [6/101] cumulate libgcc-14.2.0-1.6 [ 342s] [7/101] cumulate bash-3.2.57-1.1 [ 342s] [8/101] cumulate cpio-2.8-1.1 [ 342s] [9/101] cumulate diffutils-3.10-1.1 [ 342s] [10/101] cumulate findutils-4.3.8-1.3 [ 342s] [11/101] cumulate gdbm-1.8.3-1.6 [ 342s] [12/101] cumulate hostname-3.23-1.1 [ 342s] [13/101] cumulate libattr-2.5.1-1.4 [ 342s] [14/101] cumulate libblkid-2.39.3-1.4 [ 342s] [15/101] cumulate libbz2-1.0.8-1.4 [ 342s] [16/101] cumulate libcap-2.73-1.4 [ 342s] [17/101] cumulate libfreebl3-3.109-1.6 [ 342s] [18/101] cumulate libgfortran-14.2.0-1.6 [ 342s] [19/101] cumulate libgomp-14.2.0-1.6 [ 342s] [20/101] cumulate libitm-14.2.0-1.6 [ 342s] [21/101] cumulate libltdl-2.4.7-1.6 [ 342s] [22/101] cumulate liblua-5.1.5-1.3 [ 342s] [23/101] cumulate liblzma-5.6.3-1.6 [ 342s] [24/101] cumulate libopenssl3-3.5.0-1.6 [ 342s] [25/101] cumulate libpcre-8.45-1.3 [ 342s] [26/101] cumulate libpopt-1.16-1.3 [ 342s] [27/101] cumulate libsmack-1.3.1-1.3 [ 342s] [28/101] cumulate libsmartcols-2.39.3-1.4 [ 342s] [29/101] cumulate libsqlite-3.48.0-1.3 [ 342s] [30/101] cumulate libstdc++-14.2.0-1.6 [ 342s] [31/101] cumulate libuuid-2.39.3-1.4 [ 342s] [32/101] cumulate libxcrypt-4.4.36-1.6 [ 342s] [33/101] cumulate libxml2-2.13.5-1.5 [ 342s] [34/101] cumulate libzstd1-1.5.6-1.4 [ 342s] [35/101] cumulate m4-1.4.19-1.1 [ 342s] [36/101] cumulate net-tools-2.0_20121208git-1.3 [ 342s] [37/101] cumulate nspr-4.36-1.3 [ 342s] [38/101] cumulate patch-2.7.6-1.3 [ 342s] [39/101] cumulate pkg-config-0.29.2-1.3 [ 342s] [40/101] cumulate sed-4.1c-1.3 [ 342s] [41/101] cumulate update-alternatives-1.22.2-1.1 [ 342s] [42/101] cumulate which-2.17-1.1 [ 342s] [43/101] cumulate zlib-1.3.1-1.5 [ 342s] [44/101] cumulate build-compare-2023.06.18-1.3 [ 342s] [45/101] cumulate clang-accel-x86_64-armv7l-0.4-1.1 [ 342s] [46/101] cumulate hal-rootstrap-checker-0.1.1-1.1 [ 342s] [47/101] cumulate libstdc++-devel-14.2.0-1.6 [ 342s] [48/101] cumulate qemu-linux-user-x86_64-cross-8.2.2.1-1.1 [ 342s] [49/101] cumulate cpp-14.2.0-1.6 [ 342s] [50/101] cumulate gcc-c++-14.2.0-1.6 [ 342s] [51/101] cumulate binutils-libs-2.43-1.6 [ 342s] [52/101] cumulate coreutils-6.9-14.3 [ 342s] [53/101] cumulate gawk-3.1.5-1.1 [ 342s] [54/101] cumulate grep-2.5.2-1.3 [ 342s] [55/101] cumulate libacl-2.3.2-1.3 [ 342s] [56/101] cumulate libcc1-14.2.0-1.6 [ 342s] [57/101] cumulate libelf-0.189-1.6 [ 342s] [58/101] cumulate libmount-2.39.3-1.4 [ 342s] [59/101] cumulate libubsan-14.2.0-1.6 [ 342s] [60/101] cumulate make-4.4.1-1.3 [ 342s] [61/101] cumulate nss-certs-3.109-1.6 [ 342s] [62/101] cumulate smack-1.3.1-1.3 [ 342s] [63/101] cumulate bzip2-1.0.8-1.4 [ 342s] [64/101] cumulate libfdisk-2.39.3-1.4 [ 342s] [65/101] cumulate libmagic-5.45-1.3 [ 342s] [66/101] cumulate xz-5.6.3-1.6 [ 342s] [67/101] cumulate perl-5.38.0-1.5 [ 342s] [68/101] cumulate build-mkbaselibs-20120927-1.1 [ 342s] [69/101] cumulate linux-glibc-devel-6.6-1.6 [ 342s] [70/101] cumulate terminfo-base-full-6.4-1.6 [ 342s] [71/101] cumulate texinfo-7.1-1.4 [ 342s] [72/101] cumulate autoconf-2.71-1.6 [ 342s] [73/101] cumulate file-5.45-1.3 [ 342s] [74/101] cumulate glibc-locale-2.40-1.6 [ 342s] [75/101] cumulate tar-1.17-1.1 [ 342s] [76/101] cumulate binutils-2.43-1.6 [ 342s] [77/101] cumulate gzip-1.3.12-1.3 [ 342s] [78/101] cumulate pam-1.1.6-1.4 [ 342s] [79/101] cumulate tzdata-2024b-1.1 [ 342s] [80/101] cumulate libdw-0.189-1.6 [ 342s] [81/101] cumulate libarchive-3.7.7-1.5 [ 342s] [82/101] cumulate gcc-14.2.0-1.6 [ 342s] [83/101] cumulate makeinfo-7.1-1.4 [ 342s] [84/101] cumulate qemu-accel-x86_64-armv7l-0.4-1.1 [ 342s] [85/101] cumulate automake-1.16.5-1.6 [ 342s] [86/101] cumulate libasm-0.189-1.6 [ 342s] [87/101] cumulate libncurses6-6.4-1.6 [ 342s] [88/101] cumulate build-20120927-1.1 [ 342s] [89/101] cumulate libncurses-6.4-1.6 [ 342s] [90/101] cumulate less-668-1.1 [ 342s] [91/101] cumulate libreadline-5.2-1.4 [ 342s] [92/101] cumulate libtool-2.4.7-1.6 [ 342s] [93/101] cumulate elfutils-0.189-1.6 [ 342s] [94/101] cumulate util-linux-2.39.3-1.4 [ 342s] [95/101] cumulate util-linux-su-2.39.3-1.4 [ 342s] [96/101] cumulate libxcrypt-devel-4.4.36-1.6 [ 342s] [97/101] cumulate nss-3.109-1.6 [ 342s] [98/101] cumulate glibc-devel-2.40-1.6 [ 342s] [99/101] cumulate libsoftokn3-3.109-1.6 [ 342s] [100/101] cumulate rpm-4.14.1.1-1.6 [ 342s] [101/101] cumulate rpm-build-4.14.1.1-1.6 [ 342s] now installing cumulated packages [ 438s] Preparing... ######################################## [ 439s] Updating / installing... [ 439s] setup-0.9-1.3 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 439s] ########################## [ 439s] filesystem-3.1-1.1 ######################################## [ 440s] libmagic-data-5.45-1.3 ######################################## [ 440s] glibc-2.40-1.6 ######################################## [ 441s] libgcc-14.2.0-1.6 ######################################## [ 441s] bash-3.2.57-1.1 ######################################## [ 441s] zlib-1.3.1-1.5 ######################################## [ 442s] coreutils-6.9-14.3 ######################################## [ 442s] libstdc++-14.2.0-1.6 ######################################## [ 443s] libbz2-1.0.8-1.4 ######################################## [ 443s] libelf-0.189-1.6 ######################################## [ 443s] liblzma-5.6.3-1.6 ######################################## [ 444s] libdw-0.189-1.6 ######################################## [ 444s] libxcrypt-4.4.36-1.6 ######################################## [ 444s] libmagic-5.45-1.3 ######################################## [ 444s] libblkid-2.39.3-1.4 ######################################## [ 445s] nspr-4.36-1.3 ######################################## [ 445s] pam-1.1.6-1.4 ######################################## [ 445s] libcap-2.73-1.4 ######################################## [ 446s] libfreebl3-3.109-1.6 ######################################## [ 446s] liblua-5.1.5-1.3 ######################################## [ 446s] libpopt-1.16-1.3 ######################################## [ 446s] libuuid-2.39.3-1.4 ######################################## [ 447s] libzstd1-1.5.6-1.4 ######################################## [ 448s] linux-glibc-devel-6.6-1.6 ######################################## [ 448s] terminfo-base-full-6.4-1.6 ######################################## [ 448s] libncurses6-6.4-1.6 ######################################## [ 449s] libreadline-5.2-1.4 ######################################## [ 449s] libfdisk-2.39.3-1.4 ######################################## [ 449s] nss-certs-3.109-1.6 ######################################## [ 449s] libmount-2.39.3-1.4 ######################################## [ 449s] libasm-0.189-1.6 ######################################## [ 449s] xz-5.6.3-1.6 ######################################## [ 449s] bzip2-1.0.8-1.4 ######################################## [ 449s] libcc1-14.2.0-1.6 ######################################## [ 450s] libubsan-14.2.0-1.6 ######################################## [ 450s] gzip-1.3.12-1.3 ######################################## [ 450s] binutils-libs-2.43-1.6 ######################################## [ 454s] binutils-2.43-1.6 ######################################## [ 454s] make-4.4.1-1.3 ######################################## [ 454s] findutils-4.3.8-1.3 ######################################## [ 454s] gdbm-1.8.3-1.6 ######################################## [ 465s] perl-5.38.0-1.5 ######################################## [ 465s] build-mkbaselibs-20120927-1.1 ######################################## [ 466s] texinfo-7.1-1.4 ######################################## [ 466s] libattr-2.5.1-1.4 ######################################## [ 467s] libacl-2.3.2-1.3 ######################################## [ 467s] tar-1.17-1.1 ######################################## [ 467s] libgfortran-14.2.0-1.6 ######################################## [ 467s] libgomp-14.2.0-1.6 ######################################## [ 468s] libitm-14.2.0-1.6 ######################################## [ 468s] libltdl-2.4.7-1.6 ######################################## [ 468s] libopenssl3-3.5.0-1.6 ######################################## [ 469s] libpcre-8.45-1.3 ######################################## [ 469s] libsmack-1.3.1-1.3 ######################################## [ 470s] libsmartcols-2.39.3-1.4 ######################################## [ 470s] libsqlite-3.48.0-1.3 ######################################## [ 471s] libsoftokn3-3.109-1.6 ######################################## [ 471s] nss-3.109-1.6 ######################################## [ 472s] libxml2-2.13.5-1.5 ######################################## [ 472s] libarchive-3.7.7-1.5 ######################################## [ 473s] rpm-4.14.1.1-1.6 ######################################## [ 473s] m4-1.4.19-1.1 ######################################## [ 474s] autoconf-2.71-1.6 ######################################## [ 474s] automake-1.16.5-1.6 ######################################## [ 474s] patch-2.7.6-1.3 ######################################## [ 474s] pkg-config-0.29.2-1.3 ######################################## [ 474s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 475s] glibc-devel-2.40-1.6 ######################################## [ 475s] sed-4.1c-1.3 ######################################## [ 476s] util-linux-2.39.3-1.4 ######################################## [ 476s] libatomic-14.2.0-1.6 ######################################## [ 476s] libtool-2.4.7-1.6 ######################################## [ 476s] build-20120927-1.1 ######################################## [ 476s] makeinfo-7.1-1.4 ######################################## [ 476s] libncurses-6.4-1.6 ######################################## [ 479s] libstdc++-devel-14.2.0-1.6 ######################################## [ 479s] build-compare-2023.06.18-1.3 ######################################## [ 770s] clang-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 775s] hal-rootstrap-checker-0.1.1-1.1 ######################################## [ 790s] qemu-linux-user-x86_64-cross-8.2.2.1-1######################################## [ 801s] gcc-14.2.0-1.6 ######################################## [ 837s] qemu-accel-x86_64-armv7l-0.4-1.1 ######################################## [ 838s] rpm-build-4.14.1.1-1.6 ######################################## [ 838s] util-linux-su-2.39.3-1.4 ######################################## [ 838s] smack-1.3.1-1.3 ######################################## [ 838s] grep-2.5.2-1.3 ######################################## [ 838s] elfutils-0.189-1.6 ######################################## [ 838s] less-668-1.1 ######################################## [ 838s] file-5.45-1.3 ######################################## [ 840s] glibc-locale-2.40-1.6 ######################################## [ 840s] tzdata-2024b-1.1 ######################################## [ 843s] cpp-14.2.0-1.6 ######################################## [ 846s] gcc-c++-14.2.0-1.6 ######################################## [ 846s] gawk-3.1.5-1.1 ######################################## [ 846s] cpio-2.8-1.1 ######################################## [ 846s] diffutils-3.10-1.1 ######################################## [ 846s] hostname-3.23-1.1 ######################################## [ 846s] net-tools-2.0_20121208git-1.3 ######################################## [ 846s] update-alternatives-1.22.2-1.1 ######################################## [ 846s] which-2.17-1.1 ######################################## [ 847s] now finalizing build dir... [ 848s] ----------------------------------------------------------------- [ 848s] I have the following modifications for autoconf213.spec: [ 848s] 9c9 [ 848s] < Release: 1 [ 848s] --- [ 848s] > Release: 1.1 [ 848s] build target is armv7l-tizen-linux [ 848s] ----------------------------------------------------------------- [ 848s] ----- building autoconf213.spec (user abuild) [ 848s] ----------------------------------------------------------------- [ 848s] ----------------------------------------------------------------- [ 848s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-Dev/standard/259021431be8b5acdb85bd696e6b7a42-autoconf213' /home/abuild/rpmbuild/SOURCES/autoconf213.spec [ 848s] Building target platforms: armv7l-tizen-linux [ 848s] Building for target armv7l-tizen-linux [ 848s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.5BBqZn [ 848s] + umask 022 [ 848s] + cd /home/abuild/rpmbuild/BUILD [ 848s] + cd /home/abuild/rpmbuild/BUILD [ 848s] + rm -rf autoconf-2.13 [ 848s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/autoconf-2.13.tar.bz2 [ 848s] + /bin/tar -xof - [ 848s] + STATUS=0 [ 848s] + '[' 0 -ne 0 ']' [ 848s] + cd autoconf-2.13 [ 848s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 848s] + echo 'Patch #0 (0001-autoconf-2.12-race.patch):' [ 848s] Patch #0 (0001-autoconf-2.12-race.patch): [ 848s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 848s] patching file autoconf.sh [ 848s] patching file autoheader.sh [ 848s] patching file autoupdate.sh [ 848s] + echo 'Patch #1 (0002-autoconf-2.13-mawk.patch):' [ 848s] Patch #1 (0002-autoconf-2.13-mawk.patch): [ 848s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 848s] patching file acspecific.m4 [ 848s] patching file autoconf.texi [ 848s] patching file configure [ 848s] + echo 'Patch #2 (0003-autoconf-2.13-notmp.patch):' [ 848s] Patch #2 (0003-autoconf-2.13-notmp.patch): [ 848s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 848s] patching file autoconf.sh [ 848s] patching file autoupdate.sh [ 848s] + echo 'Patch #3 (0004-autoconf-2.13-c-exit.patch):' [ 848s] Patch #3 (0004-autoconf-2.13-c-exit.patch): [ 848s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 848s] patching file acgeneral.m4 [ 848s] patching file acspecific.m4 [ 849s] + echo 'Patch #4 (0005-autoconf-2.13-headers.patch):' [ 849s] Patch #4 (0005-autoconf-2.13-headers.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file acspecific.m4 [ 849s] + echo 'Patch #5 (0006-autoconf-2.13-autoscan.patch):' [ 849s] Patch #5 (0006-autoconf-2.13-autoscan.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file autoscan.pl [ 849s] + echo 'Patch #6 (0007-autoconf-2.13-exit.patch):' [ 849s] Patch #6 (0007-autoconf-2.13-exit.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file acgeneral.m4 [ 849s] + echo 'Patch #7 (0008-autoconf-2.13-wait3test.patch):' [ 849s] Patch #7 (0008-autoconf-2.13-wait3test.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file acspecific.m4 [ 849s] + echo 'Patch #8 (0009-autoconf-2.13-make-defs-62361.patch):' [ 849s] Patch #8 (0009-autoconf-2.13-make-defs-62361.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file acgeneral.m4 [ 849s] + echo 'Patch #9 (0010-autoconf-2.13-versioning.patch):' [ 849s] Patch #9 (0010-autoconf-2.13-versioning.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file Makefile.in [ 849s] + echo 'Patch #10 (0011-autoconf213-destdir.patch):' [ 849s] Patch #10 (0011-autoconf213-destdir.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file Makefile.in [ 849s] + echo 'Patch #11 (0012-autoconf213-info.patch):' [ 849s] Patch #11 (0012-autoconf213-info.patch): [ 849s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 849s] patching file Makefile.in [ 849s] patching file autoconf.texi [ 849s] + cp /home/abuild/rpmbuild/SOURCES/autoconf213.manifest . [ 849s] + mv autoconf.texi autoconf213.texi [ 849s] + rm -f autoconf.info [ 849s] + exit 0 [ 849s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.vcavlA [ 849s] + umask 022 [ 849s] + cd /home/abuild/rpmbuild/BUILD [ 849s] + cd autoconf-2.13 [ 849s] + ref=/usr/lib/rpm [ 849s] + mints=0 [ 849s] + case $(uname -m) in [ 849s] ++ uname -m [ 849s] + for s in guess sub [ 849s] ++ find -maxdepth 8 -name config.guess [ 849s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 849s] + grep -q config-patches@ ./config.guess [ 849s] + continue [ 849s] + for s in guess sub [ 849s] ++ find -maxdepth 8 -name config.sub [ 849s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 849s] + grep -q config-patches@ ./config.sub [ 849s] + continue [ 849s] + LANG=C [ 849s] + export LANG [ 849s] + unset DISPLAY [ 849s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -fno-finite-loops -fno-tree-loop-vectorize -fno-tree-slp-vectorize -fno-vect-cost-model -g' [ 849s] + export CFLAGS [ 849s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -fno-finite-loops -fno-tree-loop-vectorize -fno-tree-slp-vectorize -fno-vect-cost-model -g' [ 849s] + export CXXFLAGS [ 849s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -fno-finite-loops -fno-tree-loop-vectorize -fno-tree-slp-vectorize -fno-vect-cost-model -g -I%_fmoddir' [ 849s] + export FFLAGS [ 849s] + LDFLAGS= [ 849s] + export LDFLAGS [ 849s] + ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 [ 849s] creating cache ./config.cache [ 849s] checking for gm4... no [ 849s] checking for gnum4... no [ 849s] checking for m4... /bin/m4 [ 849s] checking for gawk... gawk [ 849s] checking for perl... /bin/perl [ 849s] checking for a BSD compatible install... /bin/install -c [ 849s] updating cache ./config.cache [ 849s] creating ./config.status [ 849s] creating Makefile [ 849s] creating testsuite/Makefile [ 849s] + make [ 849s] cd . && \ [ 849s] rm -f configure configure.tmp && \ [ 849s] /bin/m4 autoconf.m4 configure.in > configure.tmp && \ [ 849s] chmod +x configure.tmp && mv configure.tmp configure [ 849s] /bin/sh ./config.status --recheck [ 849s] running /bin/sh ./configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --program-suffix=-2.13 --no-create --no-recursion [ 849s] loading cache ./config.cache [ 849s] checking for gm4... (cached) /bin/m4 [ 849s] checking for gawk... (cached) gawk [ 849s] checking for perl... (cached) /bin/perl [ 849s] checking for a BSD compatible install... (cached) /bin/install -c [ 849s] creating ./config.status [ 849s] /bin/sh ./config.status [ 849s] creating Makefile [ 849s] creating testsuite/Makefile [ 849s] rm -f autoconf autoconf.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf [ 849s] rm -f autoheader autoheader.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader [ 849s] rm -f autoreconf autoreconf.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf [ 849s] rm -f autoupdate autoupdate.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate [ 849s] rm -f ifnames ifnames.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/bin/m4,g' -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames [ 849s] rm -f autoscan autoscan.tmp [ 849s] sed -e 's,@''datadir''@,/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan [ 849s] freezing autoconf.m4 [ 849s] freezing autoheader.m4 [ 849s] makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info [ 862s] + exit 0 [ 862s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.vos6fG [ 862s] + umask 022 [ 862s] + cd /home/abuild/rpmbuild/BUILD [ 862s] + cd autoconf-2.13 [ 862s] + LANG=C [ 862s] + export LANG [ 862s] + unset DISPLAY [ 862s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 862s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 862s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm install [ 862s] /bin/sh ./mkinstalldirs /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13 [ 862s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr [ 862s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/bin [ 862s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share [ 862s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info [ 862s] mkdir /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/autoconf-2.13 [ 862s] if test -f autoconf213.info; then \ [ 862s] for i in *.info*; do \ [ 862s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/$i; \ [ 862s] done; \ [ 862s] else \ [ 862s] for i in ./*.info*; do \ [ 862s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/info/`echo $i | sed 's|^./||'`; \ [ 862s] done; \ [ 862s] fi [ 862s] for p in autoconf autoheader autoreconf autoupdate ifnames ; do \ [ 862s] /bin/install -c $p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo $p|sed 's,$,-2.13,; '`; \ [ 862s] done [ 862s] for i in autoconf.m4f autoheader.m4f; do \ [ 862s] /bin/install -c -m 644 $i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 862s] done [ 862s] for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \ [ 862s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 862s] done [ 862s] if test -f autoscan; then \ [ 862s] /bin/install -c autoscan /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/bin/`echo autoscan|sed 's,$,-2.13,; '`; \ [ 862s] for i in acfunctions acheaders acidentifiers acprograms \ [ 862s] acmakevars; do \ [ 862s] /bin/install -c -m 644 ./$i /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm//usr/share/autoconf-2.13/$i; \ [ 862s] done; \ [ 862s] else :; fi [ 862s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/dir [ 862s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.la$' [ 862s] + xargs rm -f -- [ 862s] + find /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm -regex '.*\.a$' [ 862s] + xargs rm -f -- [ 862s] + rm -f /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/info/standards.info [ 862s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.13-1.1 --unique-debug-src-base autoconf213-2.13-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/autoconf-2.13 [ 863s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debuginfo.manifest [ 863s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/autoconf-2.13/autoconf213-debugsource.manifest [ 863s] + /usr/lib/rpm/check-buildroot [ 863s] + /usr/lib/rpm//brp-compress [ 863s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 863s] + /usr/lib/rpm/brp-python-hardlink [ 863s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 863s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/autoconf-2.13/isu.list [ 863s] ~/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm ~/rpmbuild/BUILD/autoconf-2.13 [ 863s] ~/rpmbuild/BUILD/autoconf-2.13 [ 863s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 863s] Processing files: autoconf213-2.13-1.1.noarch [ 863s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 863s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 863s] [ 863s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.BPWBne [ 863s] + umask 022 [ 863s] + cd /home/abuild/rpmbuild/BUILD [ 863s] + cd autoconf-2.13 [ 863s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 863s] + export LC_ALL=C [ 863s] + LC_ALL=C [ 863s] + export DOCDIR [ 863s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 863s] + cp -pr AUTHORS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 863s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 863s] + cp -pr NEWS /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 863s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 864s] + cp -pr TODO /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm/usr/share/doc/packages/autoconf213 [ 864s] + exit 0 [ 864s] Provides: autoconf213 = 2.13-1.1 [ 864s] Requires(interp): /bin/sh /bin/sh [ 864s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 864s] Requires(post): /bin/sh [ 864s] Requires(postun): /bin/sh [ 864s] Requires: /bin/perl /bin/sh [ 864s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 864s] Wrote: /home/abuild/rpmbuild/SRPMS/autoconf213-2.13-1.1.src.rpm [ 864s] Wrote: /home/abuild/rpmbuild/RPMS/noarch/autoconf213-2.13-1.1.noarch.rpm [ 864s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.FRTDmP [ 864s] + umask 022 [ 864s] + cd /home/abuild/rpmbuild/BUILD [ 864s] + cd autoconf-2.13 [ 864s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 864s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/autoconf213-2.13-1.1.arm [ 864s] + exit 0 [ 864s] ... checking for files with abuild user/group [ 864s] ... creating baselibs [ 865s] [ 865s] 32daa65e5312 finished "build autoconf213.spec" at Thu Jul 24 12:40:50 UTC 2025. [ 865s] Retried build at Mon Aug 4 15:07:06 2025 returned same result, skipped Retried build at Tue Aug 5 12:04:40 2025 returned same result, skipped Retried build at Wed Aug 6 13:42:59 2025 returned same result, skipped Retried build at Fri Aug 29 20:17:05 2025 returned same result, skipped Retried build at Mon Sep 1 16:03:12 2025 returned same result, skipped Retried build at Tue Sep 2 18:00:20 2025 returned same result, skipped Retried build at Thu Sep 4 17:32:46 2025 returned same result, skipped