[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.25 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] c60b6e8add12 started "build libpciaccess.spec" at Tue Jun 2 23:20:38 UTC 2026. [ 1s] [ 1s] Building libpciaccess for project 'Tizen-Base-SC' repository 'standard' arch 'armv7l' srcmd5 '7325d11798514e0e18cf29ffc56035ff' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.25/.build-srcdir/libpciaccess.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.25/.build-srcdir/libpciaccess.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/25/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.25/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.25/.build-srcdir/libpciaccess.spec build ... [ 2s] registering binfmt handlers for cross build [ 3s] cycle: nss -> libsoftokn3 [ 3s] breaking dependency nss -> libsoftokn3 [ 3s] [1/43] preinstalling libmagic-data... [ 4s] [2/43] preinstalling libncurses... [ 4s] [3/43] preinstalling setup... [ 4s] [4/43] preinstalling filesystem... [ 4s] [5/43] preinstalling glibc... [ 4s] [6/43] preinstalling libgcc... [ 5s] [7/43] preinstalling bash... [ 5s] [8/43] preinstalling diffutils... [ 5s] [9/43] preinstalling grep... [ 5s] [10/43] preinstalling libattr... [ 5s] [11/43] preinstalling libblkid... [ 5s] [12/43] preinstalling libbz2... [ 5s] [13/43] preinstalling libcap... [ 5s] [14/43] preinstalling libfreebl3... [ 5s] [15/43] preinstalling liblua... [ 5s] [16/43] preinstalling liblzma... [ 5s] [17/43] preinstalling libopenssl3... [ 6s] [18/43] preinstalling libpopt... [ 6s] [19/43] preinstalling libreadline... [ 6s] [20/43] preinstalling libsmack... [ 6s] [21/43] preinstalling libsqlite... [ 6s] [22/43] preinstalling libuuid... [ 6s] [23/43] preinstalling libxcrypt... [ 6s] [24/43] preinstalling libxml2... [ 6s] [25/43] preinstalling libzstd1... [ 6s] [26/43] preinstalling nspr... [ 6s] [27/43] preinstalling sed... [ 6s] [28/43] preinstalling zlib... [ 6s] [29/43] preinstalling qemu-accel-x86_64-armv7l... [ 15s] [30/43] preinstalling qemu-linux-user-x86_64-cross... [ 18s] [31/43] preinstalling coreutils... [ 18s] [32/43] preinstalling libacl... [ 18s] [33/43] preinstalling libelf... [ 18s] [34/43] preinstalling libmount... [ 18s] [35/43] preinstalling smack... [ 18s] [36/43] preinstalling bzip2... [ 18s] [37/43] preinstalling libmagic... [ 19s] [38/43] preinstalling tar... [ 19s] [39/43] preinstalling util-linux... [ 19s] [40/43] preinstalling rpm... [ 19s] [41/43] preinstalling util-linux-su... [ 19s] [42/43] preinstalling nss... [ 19s] [43/43] preinstalling libsoftokn3... [ 20s] running qemu-linux-user-x86_64-cross postinstall script [ 20s] running qemu-accel-x86_64-armv7l postinstall script [ 20s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 20s] running setup postinstall script [ 20s] chroot: failed to run command '': No such file or directory [ 20s] initializing rpm db... [ 20s] reordering...cycle: glibc-devel -> libxcrypt-devel [ 20s] breaking dependency libxcrypt-devel -> glibc-devel [ 20s] cycle: libsoftokn3 -> nss [ 20s] breaking dependency nss -> libsoftokn3 [ 20s] done [ 20s] querying package ids... [ 21s] [1/101] cumulate libmagic-data-5.46-1.4 [ 21s] [2/101] cumulate setup-0.9-1.4 [ 21s] [3/101] cumulate filesystem-3.1-3.1 [ 21s] [4/101] cumulate glibc-2.40-1.6 [ 21s] [5/101] cumulate libatomic-14.2.0-1.6 [ 21s] [6/101] cumulate libgcc-14.2.0-1.6 [ 21s] [7/101] cumulate bash-3.2.57-1.1 [ 21s] [8/101] cumulate cpio-2.8-1.1 [ 21s] [9/101] cumulate diffutils-3.10-1.1 [ 21s] [10/101] cumulate findutils-4.3.8-1.5 [ 21s] [11/101] cumulate gdbm-1.8.3-1.6 [ 21s] [12/101] cumulate hostname-3.23-1.1 [ 21s] [13/101] cumulate libattr-2.5.1-1.5 [ 21s] [14/101] cumulate libblkid-2.41.2-1.5 [ 21s] [15/101] cumulate libbz2-1.0.8-1.5 [ 21s] [16/101] cumulate libcap-2.73-1.5 [ 21s] [17/101] cumulate libfreebl3-3.109-1.4 [ 21s] [18/101] cumulate libgfortran-14.2.0-1.6 [ 21s] [19/101] cumulate libgomp-14.2.0-1.6 [ 21s] [20/101] cumulate libitm-14.2.0-1.6 [ 21s] [21/101] cumulate libltdl-2.5.4-1.6 [ 21s] [22/101] cumulate liblua-5.1.5-1.4 [ 21s] [23/101] cumulate liblzma-5.8.1-1.6 [ 21s] [24/101] cumulate libopenssl3-3.0.18-1.5 [ 21s] [25/101] cumulate libpcre-8.45-1.5 [ 21s] [26/101] cumulate libpopt-1.16-1.5 [ 21s] [27/101] cumulate libsmack-1.3.1-1.5 [ 21s] [28/101] cumulate libsmartcols-2.41.2-1.5 [ 21s] [29/101] cumulate libsqlite-3.51.0-1.5 [ 21s] [30/101] cumulate libstdc++-14.2.0-1.6 [ 21s] [31/101] cumulate libuuid-2.41.2-1.5 [ 21s] [32/101] cumulate libxcrypt-4.4.36-1.6 [ 21s] [33/101] cumulate libxml2-2.15.1-1.5 [ 21s] [34/101] cumulate libzstd1-1.5.7-1.5 [ 21s] [35/101] cumulate m4-1.4.20-1.1 [ 21s] [36/101] cumulate net-tools-2.0_20121208git-1.5 [ 21s] [37/101] cumulate nspr-4.36-1.4 [ 21s] [38/101] cumulate patch-2.8-1.5 [ 21s] [39/101] cumulate pkg-config-0.29.2-1.5 [ 21s] [40/101] cumulate sed-4.1c-1.5 [ 21s] [41/101] cumulate update-alternatives-1.22.21-1.1 [ 21s] [42/101] cumulate which-2.17-1.1 [ 21s] [43/101] cumulate zlib-1.3.1-1.5 [ 21s] [44/101] cumulate app-rootstrap-checker-1.0.0-1.1 [ 21s] [45/101] cumulate build-compare-2023.06.18-1.4 [ 21s] [46/101] cumulate hal-rootstrap-checker-1.0.0-3.1 [ 21s] [47/101] cumulate libstdc++-devel-14.2.0-1.6 [ 21s] [48/101] cumulate qemu-linux-user-x86_64-cross-9.2.3.1-3.4 [ 21s] [49/101] cumulate util-macros-1.19.0-1.1 [ 21s] [50/101] cumulate cpp-14.2.0-1.6 [ 21s] [51/101] cumulate gcc-c++-14.2.0-1.6 [ 21s] [52/101] cumulate binutils-libs-2.43-1.6 [ 21s] [53/101] cumulate coreutils-6.9-15.2 [ 21s] [54/101] cumulate gawk-3.1.5-1.1 [ 21s] [55/101] cumulate grep-2.5.2-1.4 [ 21s] [56/101] cumulate libacl-2.3.2-1.4 [ 21s] [57/101] cumulate libcc1-14.2.0-1.6 [ 21s] [58/101] cumulate libelf-0.189-1.6 [ 21s] [59/101] cumulate liblastlog2-2.41.2-1.5 [ 21s] [60/101] cumulate libmount-2.41.2-1.5 [ 21s] [61/101] cumulate make-4.4.1-1.4 [ 21s] [62/101] cumulate nss-certs-3.109-1.4 [ 21s] [63/101] cumulate smack-1.3.1-1.5 [ 21s] [64/101] cumulate bzip2-1.0.8-1.5 [ 21s] [65/101] cumulate libfdisk-2.41.2-1.5 [ 21s] [66/101] cumulate libmagic-5.46-1.4 [ 21s] [67/101] cumulate xz-5.8.1-1.6 [ 21s] [68/101] cumulate perl-5.42.0-1.5 [ 21s] [69/101] cumulate build-mkbaselibs-20120927-1.1 [ 21s] [70/101] cumulate linux-glibc-devel-6.6-1.6 [ 21s] [71/101] cumulate terminfo-base-full-6.6-1.6 [ 21s] [72/101] cumulate autoconf-2.71-1.6 [ 21s] [73/101] cumulate file-5.46-1.4 [ 21s] [74/101] cumulate glibc-locale-2.40-1.6 [ 21s] [75/101] cumulate tar-1.17-1.1 [ 21s] [76/101] cumulate binutils-2.43-1.6 [ 21s] [77/101] cumulate gzip-1.3.12-1.5 [ 21s] [78/101] cumulate pam-1.1.6-1.5 [ 21s] [79/101] cumulate tzdata-2025b-1.1 [ 21s] [80/101] cumulate libdw-0.189-1.6 [ 21s] [81/101] cumulate gcc-14.2.0-1.6 [ 21s] [82/101] cumulate libarchive-3.8.1-1.5 [ 21s] [83/101] cumulate qemu-accel-x86_64-armv7l-0.4-2.2 [ 21s] [84/101] cumulate automake-1.16.5-1.6 [ 21s] [85/101] cumulate libasm-0.189-1.6 [ 21s] [86/101] cumulate libncurses6-6.6-1.6 [ 21s] [87/101] cumulate build-20120927-1.1 [ 21s] [88/101] cumulate rpm-4.14.1.1-1.6 [ 21s] [89/101] cumulate libncurses-6.6-1.6 [ 21s] [90/101] cumulate less-685-1.1 [ 21s] [91/101] cumulate libreadline-5.2-1.5 [ 21s] [92/101] cumulate libtool-2.5.4-1.6 [ 21s] [93/101] cumulate elfutils-0.189-1.6 [ 21s] [94/101] cumulate util-linux-2.41.2-1.5 [ 21s] [95/101] cumulate util-linux-su-2.41.2-1.5 [ 21s] [96/101] cumulate libxcrypt-devel-4.4.36-1.6 [ 21s] [97/101] cumulate nss-3.109-1.4 [ 21s] [98/101] cumulate glibc-devel-2.40-1.6 [ 21s] [99/101] cumulate libsoftokn3-3.109-1.4 [ 21s] [100/101] cumulate zlib-devel-1.3.1-1.5 [ 21s] [101/101] cumulate rpm-build-4.14.1.1-1.6 [ 21s] now installing cumulated packages [ 22s] Preparing... ######################################## [ 22s] Updating / installing... [ 22s] setup-0.9-1.4 ##############warning: /etc/profile created as /etc/profile.rpmnew [ 22s] ########################## [ 22s] filesystem-3.1-3.1 ######################################## [ 22s] libmagic-data-5.46-1.4 ######################################## [ 22s] glibc-2.40-1.6 ######################################## [ 23s] libgcc-14.2.0-1.6 ######################################## [ 23s] bash-3.2.57-1.1 ######################################## [ 23s] zlib-1.3.1-1.5 ######################################## [ 23s] coreutils-6.9-15.2 ######################################## [ 23s] libbz2-1.0.8-1.5 ######################################## [ 24s] libstdc++-14.2.0-1.6 ######################################## [ 24s] libelf-0.189-1.6 ######################################## [ 24s] liblzma-5.8.1-1.6 ######################################## [ 24s] libdw-0.189-1.6 ######################################## [ 25s] libxcrypt-4.4.36-1.6 ######################################## [ 25s] libmagic-5.46-1.4 ######################################## [ 26s] libblkid-2.41.2-1.5 ######################################## [ 26s] libopenssl3-3.0.18-1.5 ######################################## [ 26s] nspr-4.36-1.4 ######################################## [ 27s] pkg-config-0.29.2-1.5 ######################################## [ 27s] pam-1.1.6-1.5 ######################################## [ 27s] libcap-2.73-1.5 ######################################## [ 28s] libfreebl3-3.109-1.4 ######################################## [ 28s] liblua-5.1.5-1.4 ######################################## [ 28s] libpopt-1.16-1.5 ######################################## [ 28s] libsqlite-3.51.0-1.5 ######################################## [ 29s] libuuid-2.41.2-1.5 ######################################## [ 29s] libzstd1-1.5.7-1.5 ######################################## [ 30s] linux-glibc-devel-6.6-1.6 ######################################## [ 30s] libxcrypt-devel-4.4.36-1.6 ######################################## [ 30s] glibc-devel-2.40-1.6 ######################################## [ 30s] terminfo-base-full-6.6-1.6 ######################################## [ 30s] libncurses6-6.6-1.6 ######################################## [ 30s] libreadline-5.2-1.5 ######################################## [ 31s] libfdisk-2.41.2-1.5 ######################################## [ 31s] liblastlog2-2.41.2-1.5 ######################################## [ 31s] nss-certs-3.109-1.4 ######################################## [ 31s] libsoftokn3-3.109-1.4 ######################################## [ 32s] nss-3.109-1.4 ######################################## [ 32s] libmount-2.41.2-1.5 ######################################## [ 32s] libasm-0.189-1.6 ######################################## [ 32s] xz-5.8.1-1.6 ######################################## [ 32s] libcc1-14.2.0-1.6 ######################################## [ 32s] bzip2-1.0.8-1.5 ######################################## [ 32s] gzip-1.3.12-1.5 ######################################## [ 33s] binutils-libs-2.43-1.6 ######################################## [ 33s] binutils-2.43-1.6 ######################################## [ 33s] make-4.4.1-1.4 ######################################## [ 33s] findutils-4.3.8-1.5 ######################################## [ 33s] gdbm-1.8.3-1.6 ######################################## [ 36s] perl-5.42.0-1.5 ######################################## [ 36s] build-mkbaselibs-20120927-1.1 ######################################## [ 36s] libattr-2.5.1-1.5 ######################################## [ 36s] libacl-2.3.2-1.4 ######################################## [ 37s] tar-1.17-1.1 ######################################## [ 37s] libgfortran-14.2.0-1.6 ######################################## [ 37s] libgomp-14.2.0-1.6 ######################################## [ 37s] libitm-14.2.0-1.6 ######################################## [ 37s] libltdl-2.5.4-1.6 ######################################## [ 38s] libpcre-8.45-1.5 ######################################## [ 38s] libsmack-1.3.1-1.5 ######################################## [ 38s] libsmartcols-2.41.2-1.5 ######################################## [ 38s] libxml2-2.15.1-1.5 ######################################## [ 39s] libarchive-3.8.1-1.5 ######################################## [ 39s] rpm-4.14.1.1-1.6 ######################################## [ 40s] m4-1.4.20-1.1 ######################################## [ 40s] autoconf-2.71-1.6 ######################################## [ 40s] automake-1.16.5-1.6 ######################################## [ 40s] patch-2.8-1.5 ######################################## [ 40s] sed-4.1c-1.5 ######################################## [ 40s] util-linux-2.41.2-1.5 ######################################## [ 40s] libatomic-14.2.0-1.6 ######################################## [ 40s] libtool-2.5.4-1.6 ######################################## [ 40s] build-20120927-1.1 ######################################## [ 40s] libncurses-6.6-1.6 ######################################## [ 40s] zlib-devel-1.3.1-1.5 ######################################## [ 40s] util-macros-1.19.0-1.1 ######################################## [ 41s] libstdc++-devel-14.2.0-1.6 ######################################## [ 41s] app-rootstrap-checker-1.0.0-1.1 ######################################## [ 41s] build-compare-2023.06.18-1.4 ######################################## [ 41s] hal-rootstrap-checker-1.0.0-3.1 ######################################## [ 45s] qemu-linux-user-x86_64-cross-9.2.3.1-3######################################## [ 47s] gcc-14.2.0-1.6 ######################################## [ 53s] qemu-accel-x86_64-armv7l-0.4-2.2 ######################################## [ 53s] util-linux-su-2.41.2-1.5 ######################################## [ 53s] rpm-build-4.14.1.1-1.6 ######################################## [ 53s] smack-1.3.1-1.5 ######################################## [ 53s] grep-2.5.2-1.4 ######################################## [ 53s] elfutils-0.189-1.6 ######################################## [ 53s] less-685-1.1 ######################################## [ 53s] file-5.46-1.4 ######################################## [ 54s] glibc-locale-2.40-1.6 ######################################## [ 54s] tzdata-2025b-1.1 ######################################## [ 55s] cpp-14.2.0-1.6 ######################################## [ 56s] gcc-c++-14.2.0-1.6 ######################################## [ 56s] gawk-3.1.5-1.1 ######################################## [ 56s] cpio-2.8-1.1 ######################################## [ 56s] diffutils-3.10-1.1 ######################################## [ 56s] hostname-3.23-1.1 ######################################## [ 56s] net-tools-2.0_20121208git-1.5 ######################################## [ 56s] update-alternatives-1.22.21-1.1 ######################################## [ 56s] which-2.17-1.1 ######################################## [ 57s] now finalizing build dir... [ 58s] ----------------------------------------------------------------- [ 58s] I have the following modifications for libpciaccess.spec: [ 58s] 6c6 [ 58s] < Release: 0 [ 58s] --- [ 58s] > Release: 1.1 [ 58s] 84a85 [ 58s] > %changelog [ 58s] build target is armv7l-tizen-linux [ 58s] ----------------------------------------------------------------- [ 58s] ----- building libpciaccess.spec (user abuild) [ 58s] ----------------------------------------------------------------- [ 58s] ----------------------------------------------------------------- [ 58s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-SC/standard/7325d11798514e0e18cf29ffc56035ff-libpciaccess' /home/abuild/rpmbuild/SOURCES/libpciaccess.spec [ 58s] Building target platforms: armv7l-tizen-linux [ 58s] Building for target armv7l-tizen-linux [ 58s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.Uuoohi [ 58s] + umask 022 [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + cd /home/abuild/rpmbuild/BUILD [ 58s] + rm -rf libpciaccess-0.13.2 [ 58s] + /bin/bzip2 -dc /home/abuild/rpmbuild/SOURCES/libpciaccess-0.13.2.tar.bz2 [ 58s] + /bin/tar -xof - [ 58s] + STATUS=0 [ 58s] + '[' 0 -ne 0 ']' [ 58s] + cd libpciaccess-0.13.2 [ 58s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 58s] + echo 'Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch):' [ 58s] Patch #0 (0001-packaging-Bump-to-version-0.13.2.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file src/Makefile.am [ 58s] + echo 'Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch):' [ 58s] Patch #1 (0002-initialize-buf-use-integer-variable-for-read.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file src/common_bridge.c [ 58s] patching file src/linux_sysfs.c [ 58s] + echo 'Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch):' [ 58s] Patch #2 (0003-Removed-include-sys-io.h-for-arm-builds.patch): [ 58s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2 [ 58s] patching file src/linux_sysfs.c [ 58s] + cp /home/abuild/rpmbuild/SOURCES/libpciaccess.manifest . [ 59s] + exit 0 [ 59s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.WMMZJq [ 59s] + umask 022 [ 59s] + cd /home/abuild/rpmbuild/BUILD [ 59s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g' [ 59s] + export CFLAGS [ 59s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g' [ 59s] + export CXXFLAGS [ 59s] + LDFLAGS= [ 59s] + export LDFLAGS [ 59s] + cd libpciaccess-0.13.2 [ 59s] + ref=/usr/lib/rpm [ 59s] + mints=0 [ 59s] + case $(uname -m) in [ 59s] ++ uname -m [ 59s] + for s in guess sub [ 59s] ++ find -maxdepth 8 -name config.guess [ 59s] + for s in guess sub [ 59s] ++ find -maxdepth 8 -name config.sub [ 59s] + NOCONFIGURE=1 [ 59s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g' [ 59s] + export CFLAGS [ 59s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g' [ 59s] + export CXXFLAGS [ 59s] + LDFLAGS= [ 59s] + export LDFLAGS [ 59s] + ./autogen.sh --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info [ 59s] autoreconf: export WARNINGS= [ 60s] autoreconf: Entering directory '.' [ 60s] autoreconf: configure.ac: not using Gettext [ 61s] autoreconf: running: aclocal -I m4 [ 66s] autoreconf: configure.ac: tracing [ 67s] autoreconf: running: libtoolize --copy [ 67s] libtoolize: putting auxiliary files in '.'. [ 67s] libtoolize: copying file './ltmain.sh' [ 67s] libtoolize: putting macros in 'm4'. [ 67s] libtoolize: copying file 'm4/libtool.m4' [ 68s] libtoolize: copying file 'm4/ltoptions.m4' [ 68s] libtoolize: copying file 'm4/ltsugar.m4' [ 68s] libtoolize: copying file 'm4/ltversion.m4' [ 68s] libtoolize: copying file 'm4/lt~obsolete.m4' [ 68s] libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, [ 68s] libtoolize: and rerunning libtoolize and aclocal. [ 68s] autoreconf: configure.ac: not using Intltool [ 68s] autoreconf: configure.ac: not using Gtkdoc [ 68s] autoreconf: running: aclocal -I m4 [ 74s] autoreconf: running: /usr/bin/autoconf [ 76s] configure.ac:36: warning: The macro `AC_PROG_LIBTOOL' is obsolete. [ 76s] configure.ac:36: You should run autoupdate. [ 76s] m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from... [ 76s] configure.ac:36: the top level [ 76s] configure.ac:42: warning: The macro `AC_PROG_CC_C99' is obsolete. [ 76s] configure.ac:42: You should run autoupdate. [ 76s] ./lib/autoconf/c.m4:1659: AC_PROG_CC_C99 is expanded from... [ 76s] aclocal.m4:1809: XORG_COMPILER_BRAND is expanded from... [ 76s] aclocal.m4:1928: XORG_COMPILER_FLAGS is expanded from... [ 76s] aclocal.m4:2100: XORG_DEFAULT_OPTIONS is expanded from... [ 76s] configure.ac:42: the top level [ 79s] autoreconf: running: /usr/bin/autoheader [ 81s] autoreconf: running: automake --add-missing --copy --no-force [ 84s] configure.ac:33: installing './compile' [ 84s] configure.ac:36: installing './config.guess' [ 84s] configure.ac:36: installing './config.sub' [ 84s] configure.ac:32: installing './install-sh' [ 84s] configure.ac:32: installing './missing' [ 85s] scanpci/Makefile.am: installing './depcomp' [ 86s] autoreconf: Leaving directory '.' [ 86s] checking for a BSD-compatible install... /bin/install -c [ 86s] checking whether build environment is sane... yes [ 86s] checking for a race-free mkdir -p... /bin/mkdir -p [ 86s] checking for gawk... gawk [ 86s] checking whether make sets $(MAKE)... yes [ 86s] checking whether make supports nested variables... yes [ 86s] checking whether make supports the include directive... yes (GNU style) [ 86s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 86s] checking whether the C compiler works... yes [ 86s] checking for C compiler default output file name... a.out [ 86s] checking for suffix of executables... [ 87s] checking whether we are cross compiling... no [ 87s] checking for suffix of object files... o [ 87s] checking whether the compiler supports GNU C... yes [ 87s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 87s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 87s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 87s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 87s] checking for stdio.h... yes [ 87s] checking for stdlib.h... yes [ 87s] checking for string.h... yes [ 87s] checking for inttypes.h... yes [ 87s] checking for stdint.h... yes [ 87s] checking for strings.h... yes [ 87s] checking for sys/stat.h... yes [ 87s] checking for sys/types.h... yes [ 87s] checking for unistd.h... yes [ 87s] checking for wchar.h... yes [ 87s] checking for minix/config.h... no [ 87s] checking whether it is safe to define __EXTENSIONS__... yes [ 87s] checking whether _XOPEN_SOURCE should be defined... no [ 88s] checking build system type... armv7l-tizen-linux-gnueabi [ 88s] checking host system type... armv7l-tizen-linux-gnueabi [ 88s] checking how to print strings... printf [ 88s] checking for a sed that does not truncate output... /bin/sed [ 88s] checking for grep that handles long lines and -e... /bin/grep [ 88s] checking for egrep... /bin/grep -E [ 88s] checking for fgrep... /bin/grep -F [ 88s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 88s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 88s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 88s] checking the name lister (/bin/nm -B) interface... BSD nm [ 88s] checking whether ln -s works... yes [ 88s] checking the maximum length of command line arguments... 1572864 [ 88s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 88s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 88s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 88s] checking for file... file [ 88s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 88s] checking for objdump... objdump [ 88s] checking how to recognize dependent libraries... pass_all [ 88s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 88s] checking for dlltool... no [ 88s] checking how to associate runtime and link libraries... printf %s\n [ 88s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 88s] checking for ranlib... ranlib [ 88s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 88s] checking for ar... ar [ 88s] checking for archiver @FILE support... @ [ 88s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 88s] checking for strip... strip [ 88s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 88s] checking for sysroot... no [ 88s] checking for a working dd... /bin/dd [ 88s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 88s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 88s] checking for mt... no [ 88s] checking if : is a manifest tool... no [ 88s] checking for dlfcn.h... yes [ 88s] checking for objdir... .libs [ 88s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 88s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 88s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 88s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 88s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 88s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 88s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 88s] checking whether -lc should be explicitly linked in... no [ 88s] checking dynamic linker characteristics... GNU/Linux ld.so [ 88s] checking how to hardcode library paths into programs... immediate [ 88s] checking whether stripping libraries is possible... yes [ 88s] checking if libtool supports shared libraries... yes [ 88s] checking whether to build shared libraries... yes [ 88s] checking whether to build static libraries... yes [ 89s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 89s] checking whether __clang__ is declared... no [ 89s] checking whether __INTEL_COMPILER is declared... no [ 89s] checking whether __SUNPRO_C is declared... no [ 89s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 89s] checking pkg-config is at least version 0.9.0... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 89s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 90s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 91s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 91s] checking whether make supports nested variables... (cached) yes [ 91s] checking for special C compiler options needed for large files... no [ 91s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 91s] checking for err.h... yes [ 91s] checking for asm/mtrr.h... no [ 91s] checking for struct pci_io.pi_sel.pc_domain... no [ 91s] checking that generated files are newer than configure... done [ 91s] configure: creating ./config.status [ 94s] config.status: creating Makefile [ 94s] config.status: creating include/Makefile [ 94s] config.status: creating man/Makefile [ 94s] config.status: creating src/Makefile [ 95s] config.status: creating scanpci/Makefile [ 95s] config.status: creating pciaccess.pc [ 95s] config.status: creating config.h [ 95s] config.status: executing depfiles commands [ 95s] config.status: executing libtool commands [ 96s] + export 'CFLAGS=-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g -w' [ 96s] + CFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g -w' [ 96s] + export 'CFLAGS=-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 96s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 96s] + CFLAGS='-O2 -g2 -pipe -w -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -fmessage-length=0 -Wl,--as-needed -Wl,-z,relro' [ 96s] + export CFLAGS [ 96s] + CXXFLAGS='-Os -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -ffunction-sections -fdata-sections -Wl,--gc-sections -fno-dwarf2-cfi-asm -fno-asynchronous-unwind-tables -fno-unwind-tables -fomit-frame-pointer -fno-ident -fno-partial-inlining -fno-unswitch-loops -fno-common -Wl,--as-needed -g' [ 96s] + export CXXFLAGS [ 96s] + LDFLAGS= [ 96s] + export LDFLAGS [ 96s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --disable-static --with-pciids-path=/usr/share/misc --with-zlib [ 98s] checking for a BSD-compatible install... /bin/install -c [ 98s] checking whether build environment is sane... yes [ 98s] checking for a race-free mkdir -p... /bin/mkdir -p [ 98s] checking for gawk... gawk [ 98s] checking whether make sets $(MAKE)... yes [ 98s] checking whether make supports nested variables... yes [ 99s] checking whether make supports the include directive... yes (GNU style) [ 99s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 99s] checking whether the C compiler works... yes [ 99s] checking for C compiler default output file name... a.out [ 99s] checking for suffix of executables... [ 99s] checking whether we are cross compiling... no [ 100s] checking for suffix of object files... o [ 100s] checking whether the compiler supports GNU C... yes [ 100s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 100s] checking for armv7l-tizen-linux-gnueabi-gcc option to enable C11 features... none needed [ 100s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 101s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 101s] checking for stdio.h... yes [ 101s] checking for stdlib.h... yes [ 101s] checking for string.h... yes [ 101s] checking for inttypes.h... yes [ 101s] checking for stdint.h... yes [ 102s] checking for strings.h... yes [ 102s] checking for sys/stat.h... yes [ 102s] checking for sys/types.h... yes [ 102s] checking for unistd.h... yes [ 102s] checking for wchar.h... yes [ 103s] checking for minix/config.h... no [ 103s] checking whether it is safe to define __EXTENSIONS__... yes [ 103s] checking whether _XOPEN_SOURCE should be defined... no [ 103s] checking build system type... armv7l-tizen-linux-gnueabi [ 103s] checking host system type... armv7l-tizen-linux-gnueabi [ 103s] checking how to print strings... printf [ 103s] checking for a sed that does not truncate output... /bin/sed [ 103s] checking for grep that handles long lines and -e... /bin/grep [ 103s] checking for egrep... /bin/grep -E [ 103s] checking for fgrep... /bin/grep -F [ 104s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 104s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 104s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm -B [ 104s] checking the name lister (/bin/nm -B) interface... BSD nm [ 104s] checking whether ln -s works... yes [ 104s] checking the maximum length of command line arguments... 1572864 [ 104s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 104s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 104s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 104s] checking for file... file [ 104s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 104s] checking for objdump... objdump [ 104s] checking how to recognize dependent libraries... pass_all [ 104s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 104s] checking for dlltool... no [ 104s] checking how to associate runtime and link libraries... printf %s\n [ 104s] checking for armv7l-tizen-linux-gnueabi-ranlib... no [ 104s] checking for ranlib... ranlib [ 104s] checking for armv7l-tizen-linux-gnueabi-ar... no [ 104s] checking for ar... ar [ 104s] checking for archiver @FILE support... @ [ 104s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 104s] checking for strip... strip [ 105s] checking command to parse /bin/nm -B output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 105s] checking for sysroot... no [ 105s] checking for a working dd... /bin/dd [ 105s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 105s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 105s] checking for mt... no [ 105s] checking if : is a manifest tool... no [ 106s] checking for dlfcn.h... yes [ 106s] checking for objdir... .libs [ 106s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... yes [ 106s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 106s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 107s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 107s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 107s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 107s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 107s] checking whether -lc should be explicitly linked in... no [ 108s] checking dynamic linker characteristics... GNU/Linux ld.so [ 108s] checking how to hardcode library paths into programs... immediate [ 108s] checking whether stripping libraries is possible... yes [ 108s] checking if libtool supports shared libraries... yes [ 108s] checking whether to build shared libraries... yes [ 108s] checking whether to build static libraries... no [ 108s] checking for armv7l-tizen-linux-gnueabi-gcc options needed to detect all undeclared functions... none needed [ 109s] checking whether __clang__ is declared... no [ 109s] checking whether __INTEL_COMPILER is declared... no [ 109s] checking whether __SUNPRO_C is declared... no [ 109s] checking for armv7l-tizen-linux-gnueabi-pkg-config... /bin/armv7l-tizen-linux-gnueabi-pkg-config [ 109s] checking pkg-config is at least version 0.9.0... yes [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unknown-warning-option... no [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=unused-command-line-argument... no [ 110s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wall... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wpointer-arith... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-declarations... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wformat=2... yes [ 111s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wstrict-prototypes... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-prototypes... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wnested-externs... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wbad-function-cast... yes [ 112s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wold-style-definition... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wdeclaration-after-statement... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wunused... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wuninitialized... yes [ 113s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wshadow... yes [ 114s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-noreturn... yes [ 114s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wmissing-format-attribute... yes [ 114s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wredundant-decls... yes [ 114s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Wlogical-op... yes [ 114s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=implicit... yes [ 115s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=nonnull... yes [ 115s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=init-self... yes [ 115s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=main... yes [ 115s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=missing-braces... yes [ 116s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=sequence-point... yes [ 116s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=return-type... yes [ 116s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=trigraphs... yes [ 116s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=array-bounds... yes [ 117s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=write-strings... yes [ 117s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=address... yes [ 117s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=int-to-pointer-cast... yes [ 117s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=pointer-to-int-cast... yes [ 118s] checking if armv7l-tizen-linux-gnueabi-gcc supports -pedantic... yes [ 118s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror... yes [ 118s] checking if armv7l-tizen-linux-gnueabi-gcc supports -Werror=attributes... yes [ 118s] checking whether make supports nested variables... (cached) yes [ 119s] checking for gzopen in -lz... yes [ 119s] checking for zlib.h... yes [ 119s] checking for special C compiler options needed for large files... no [ 119s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 119s] checking for err.h... yes [ 119s] checking for asm/mtrr.h... no [ 120s] checking for struct pci_io.pi_sel.pc_domain... no [ 120s] checking that generated files are newer than configure... done [ 120s] configure: creating ./config.status [ 126s] config.status: creating Makefile [ 127s] config.status: creating include/Makefile [ 127s] config.status: creating man/Makefile [ 127s] config.status: creating src/Makefile [ 127s] config.status: creating scanpci/Makefile [ 127s] config.status: creating pciaccess.pc [ 127s] config.status: creating config.h [ 127s] config.status: executing depfiles commands [ 127s] config.status: executing libtool commands [ 127s] + make -j12 [ 127s] make all-recursive [ 127s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 127s] Making all in include [ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 127s] make[2]: Nothing to be done for 'all'. [ 127s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 127s] Making all in man [ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 127s] GEN scanpci.1 [ 127s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 127s] Making all in src [ 127s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 127s] CC common_bridge.lo [ 127s] CC common_init.lo [ 127s] CC common_iterator.lo [ 127s] CC common_io.lo [ 127s] CC common_interface.lo [ 127s] CC common_capability.lo [ 127s] CC common_device_name.lo [ 127s] CC common_map.lo [ 127s] CC common_vgaarb.lo [ 127s] CC linux_sysfs.lo [ 127s] CC linux_devmem.lo [ 128s] CCLD libpciaccess.la [ 128s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 128s] Making all in scanpci [ 128s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 128s] CC scanpci.o [ 129s] CCLD scanpci [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] + exit 0 [ 129s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.alzXLW [ 129s] + umask 022 [ 129s] + cd /home/abuild/rpmbuild/BUILD [ 129s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 129s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 129s] + cd libpciaccess-0.13.2 [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 129s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm install [ 129s] Making install in include [ 129s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 129s] make[2]: Nothing to be done for 'install-exec-am'. [ 129s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 129s] /bin/install -c -m 644 pciaccess.h '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/include' [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/include' [ 129s] Making install in man [ 129s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 129s] make[2]: Nothing to be done for 'install-exec-am'. [ 129s] make[2]: Nothing to be done for 'install-data-am'. [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/man' [ 129s] Making install in src [ 129s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 129s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 129s] /bin/sh ../libtool --mode=install /bin/install -c libpciaccess.la '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib' [ 129s] libtool: install: /bin/install -c .libs/libpciaccess.so.0.13.2 /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 129s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so.0 || { rm -f libpciaccess.so.0 && ln -s libpciaccess.so.0.13.2 libpciaccess.so.0; }; }) [ 129s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib && { ln -s -f libpciaccess.so.0.13.2 libpciaccess.so || { rm -f libpciaccess.so && ln -s libpciaccess.so.0.13.2 libpciaccess.so; }; }) [ 129s] libtool: install: /bin/install -c .libs/libpciaccess.lai /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.la [ 129s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 129s] make[2]: Nothing to be done for 'install-data-am'. [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/src' [ 129s] Making install in scanpci [ 129s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 129s] make[2]: Nothing to be done for 'install-exec-am'. [ 129s] make[2]: Nothing to be done for 'install-data-am'. [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/scanpci' [ 129s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] make[2]: Nothing to be done for 'install-exec-am'. [ 129s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 129s] /bin/install -c -m 644 pciaccess.pc '/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/pkgconfig' [ 129s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2' [ 129s] + rm -f /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info/dir [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.la$' [ 129s] + xargs rm -f -- [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*\.a$' [ 129s] + xargs rm -f -- [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/info [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/packages [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc/libpciaccess-0.13.2 [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/gtk-doc [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/doc [ 129s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/man [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]' [ 129s] + xargs rm -f -- [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/../man./.*.[0-9]' [ 129s] + xargs rm -f -- [ 129s] + find /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm -regex '.*/man/man./.*.[0-9]pm' [ 129s] + xargs rm -f -- [ 129s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.13.2-1.1 --unique-debug-src-base libpciaccess-0.13.2-1.1.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2 [ 129s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2 [ 130s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_loclists [ 130s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: Unknown debugging section .debug_rnglists [ 130s] /usr/lib/rpm/debugedit: /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/lib/libpciaccess.so.0.13.2: DWARF version 5 unhandled [ 130s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debuginfo.manifest [ 130s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/libpciaccess-debugsource.manifest [ 130s] + /usr/lib/rpm/check-buildroot [ 130s] + /usr/lib/rpm//brp-compress [ 130s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 130s] + /usr/lib/rpm/brp-python-hardlink [ 130s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 130s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/isu.list [ 130s] ~/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 130s] ~/rpmbuild/BUILD/libpciaccess-0.13.2 [ 130s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm arm [ 130s] Package: libpciaccess, Group: Base/Device Management [ 130s] # NOTICE: Config hal-rootstrap-checker.yaml skipped # [ 130s] ########################################################################################## [ 130s] # SUCCESS: hal-rootstrap-checker done # [ 130s] ########################################################################################## [ 130s] Processing files: libpciaccess-0.13.2-1.1.armv7l [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.qBlmA8 [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd libpciaccess-0.13.2 [ 130s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 130s] + export LC_ALL=C [ 130s] + LC_ALL=C [ 130s] + export LICENSEDIR [ 130s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 130s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess [ 130s] + exit 0 [ 130s] Provides: libpciaccess = 0.13.2-1.1 libpciaccess(armv7l-32) = 0.13.2-1.1 libpciaccess.so.0 [ 130s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires(post): /sbin/ldconfig [ 130s] Requires(postun): /sbin/ldconfig [ 130s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libc.so.6 libc.so.6(GLIBC_2.33) libc.so.6(GLIBC_2.38) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) libz.so.1 libz.so.1(ZLIB_1.2.3.3) [ 130s] Processing files: libpciaccess-debugsource-0.13.2-1.1.armv7l [ 130s] warning: Empty %files file /home/abuild/rpmbuild/BUILD/libpciaccess-0.13.2/debugsourcefiles.list [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Processing files: libpciaccess-devel-0.13.2-1.1.armv7l [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Vdnx1x [ 130s] + umask 022 [ 130s] + cd /home/abuild/rpmbuild/BUILD [ 130s] + cd libpciaccess-0.13.2 [ 130s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 130s] + export LC_ALL=C [ 130s] + LC_ALL=C [ 130s] + export LICENSEDIR [ 130s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 130s] + cp -pr COPYING /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm/usr/share/licenses/libpciaccess-devel [ 130s] + exit 0 [ 130s] Provides: libpciaccess-devel = 0.13.2-1.1 libpciaccess-devel(armv7l-32) = 0.13.2-1.1 pkgconfig(pciaccess) = 0.13.2 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Requires: /usr/bin/pkg-config libpciaccess.so.0 [ 130s] Processing files: libpciaccess-debuginfo-0.13.2-1.1.armv7l [ 130s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 130s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 130s] [ 130s] Provides: libpciaccess-debuginfo = 0.13.2-1.1 libpciaccess-debuginfo(armv7l-32) = 0.13.2-1.1 [ 130s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 130s] Recommends: libpciaccess-debugsource(armv7l-32) = 0.13.2-1.1 [ 130s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 130s] Wrote: /home/abuild/rpmbuild/SRPMS/libpciaccess-0.13.2-1.1.src.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-0.13.2-1.1.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debugsource-0.13.2-1.1.armv7l.rpm [ 130s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-devel-0.13.2-1.1.armv7l.rpm [ 131s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libpciaccess-debuginfo-0.13.2-1.1.armv7l.rpm [ 131s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.f9A9tr [ 131s] + umask 022 [ 131s] + cd /home/abuild/rpmbuild/BUILD [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 131s] + cd libpciaccess-0.13.2 [ 131s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/libpciaccess-0.13.2-1.1.arm [ 131s] + exit 0 [ 131s] ... checking for files with abuild user/group [ 131s] ... creating baselibs [ 132s] no targets for arch armv7l, nothing to do [ 132s] [ 132s] c60b6e8add12 finished "build libpciaccess.spec" at Tue Jun 2 23:22:49 UTC 2026. [ 132s]