[    0s] on X86_64, no limit mem size
[    0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3
[    0s] Using BUILD_ARCH=x86_64:i686:i586:i486:i386
[    0s] 
[    1s] 
[    1s] 8318a75e8ca9 started "build perl-DBD-SQLite.spec" at Tue Jul 15 16:02:31 UTC 2025.
[    1s] 
[    1s] Building perl-DBD-SQLite for project 'Tizen-Base-X-ASAN' repository 'standard' arch 'x86_64' srcmd5 '4fb418fbb3d4945c6ef63c7af57f58a8'
[    1s] 
[    1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-DBD-SQLite.spec ...
[    1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-DBD-SQLite.spec
[    1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/3/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.3/.build-srcdir/perl-DBD-SQLite.spec build ...
[    6s] cycle: nss -> libsoftokn3
[    6s]   breaking dependency nss -> libsoftokn3
[    6s] [1/42] preinstalling libmagic-data...
[    6s] [2/42] preinstalling libncurses...
[    7s] [3/42] preinstalling setup...
[    7s] [4/42] preinstalling filesystem...
[    7s] [5/42] preinstalling glibc...
[    8s] [6/42] preinstalling libgcc...
[    8s] [7/42] preinstalling libstdc++...
[    9s] [8/42] preinstalling libasan...
[    9s] [9/42] preinstalling findutils...
[    9s] [10/42] preinstalling grep...
[    9s] [11/42] preinstalling libattr...
[    9s] [12/42] preinstalling libbz2...
[    9s] [13/42] preinstalling libcap...
[    9s] [14/42] preinstalling liblua...
[   10s] [15/42] preinstalling liblzma...
[   10s] [16/42] preinstalling libpopt...
[   10s] [17/42] preinstalling libsmack...
[   10s] [18/42] preinstalling libxcrypt...
[   10s] [19/42] preinstalling nspr...
[   10s] [20/42] preinstalling sed...
[   10s] [21/42] preinstalling zlib...
[   10s] [22/42] preinstalling bash...
[   10s] [23/42] preinstalling diffutils...
[   10s] [24/42] preinstalling libfreebl3...
[   11s] [25/42] preinstalling libreadline...
[   11s] [26/42] preinstalling libsqlite...
[   11s] [27/42] preinstalling libxml2...
[   11s] [28/42] preinstalling libzstd1...
[   11s] [29/42] preinstalling asan-build-env...
[   11s] [30/42] preinstalling libacl...
[   11s] [31/42] preinstalling libelf...
[   11s] [32/42] preinstalling smack...
[   11s] [33/42] preinstalling bzip2...
[   11s] [34/42] preinstalling coreutils...
[   12s] [35/42] preinstalling libmagic...
[   12s] [36/42] preinstalling util-linux...
[   12s] [37/42] preinstalling tar...
[   12s] [38/42] preinstalling util-linux-su...
[   12s] [39/42] preinstalling nss...
[   12s] [40/42] preinstalling libsoftokn3...
[   12s] [41/42] preinstalling rpm...
[   14s] [42/42] preinstalling asan-force-options...
[   14s] running setup postinstall script
[   14s] chroot: failed to run command '<lua>': No such file or directory
[   14s] running asan-build-env postinstall script
[   14s] running asan-force-options postinstall script
[   14s] grep: error while loading shared libraries: libpcre.so.1: cannot open shared object file: No such file or directory
[   15s] initializing rpm db...
[   15s] reordering...cycle: glibc-devel -> libxcrypt-devel
[   15s]   breaking dependency libxcrypt-devel -> glibc-devel
[   15s] cycle: nss -> libsoftokn3
[   15s]   breaking dependency nss -> libsoftokn3
[   15s] done
[   15s] querying package ids...
[   16s] [1/102] installing libmagic-data-5.45-1.5
[   16s] [2/102] installing setup-0.9-1.1
[   16s] [3/102] installing filesystem-3.1-1.1
[   16s] [4/102] installing glibc-2.40-1.6
[   17s] [5/102] installing libatomic-14.2.0-1.6
[   17s] [6/102] installing libgcc-14.2.0-1.6
[   17s] [7/102] installing libgomp-14.2.0-1.6
[   18s] [8/102] installing libitm-14.2.0-1.6
[   18s] [9/102] installing libquadmath-14.2.0-1.6
[   18s] [10/102] installing update-alternatives-1.22.2-1.2
[   18s] [11/102] installing libgfortran-14.2.0-1.6
[   18s] [12/102] installing libstdc++-14.2.0-1.6
[   19s] [13/102] installing libstdc++-devel-14.2.0-1.6
[   19s] [14/102] installing libasan-14.2.0-1.6
[   19s] [15/102] installing libcc1-14.2.0-1.6
[   20s] [16/102] installing libhwasan-14.2.0-1.6
[   20s] [17/102] installing libubsan-14.2.0-1.6
[   20s] [18/102] installing cpio-2.8-1.1
[   20s] [19/102] installing findutils-4.3.8-1.5
[   21s] [20/102] installing gdbm-1.8.3-1.6
[   21s] [21/102] installing hostname-3.23-1.1
[   21s] [22/102] installing libattr-2.5.1-1.5
[   21s] [23/102] installing libbz2-1.0.8-1.5
[   21s] [24/102] installing libcap-2.73-1.5
[   21s] [25/102] installing libltdl-2.4.7-1.6
[   22s] [26/102] installing liblua-5.1.5-1.4
[   22s] [27/102] installing liblzma-5.6.3-1.6
[   22s] [28/102] installing libpopt-1.16-1.4
[   22s] [29/102] installing libsmack-1.3.1-1.4
[   23s] [30/102] installing libsmartcols-2.39.3-1.5
[   23s] [31/102] installing libuuid-2.39.3-1.5
[   23s] [32/102] installing libxcrypt-4.4.36-1.6
[   23s] [33/102] installing m4-1.4.19-1.1
[   24s] [34/102] installing net-tools-2.0_20121208git-1.4
[   24s] [35/102] installing nspr-4.36-1.4
[   24s] [36/102] installing patch-2.7.6-1.4
[   25s] [37/102] installing sed-4.1c-1.4
[   25s] [38/102] installing which-2.17-1.1
[   25s] [39/102] installing zlib-1.3.1-1.5
[   25s] [40/102] installing bash-3.2.57-1.1
[   25s] [41/102] installing diffutils-3.10-1.1
[   26s] [42/102] installing libblkid-2.39.3-1.5
[   26s] [43/102] installing libfreebl3-3.109-1.6
[   26s] [44/102] installing libopenssl3-3.5.0-1.6
[   27s] [45/102] installing libpcre-8.45-1.5
[   27s] [46/102] installing libsqlite-3.48.0-1.5
[   27s] [47/102] installing libxml2-2.13.5-1.5
[   28s] [48/102] installing libzstd1-1.5.6-1.5
[   28s] [49/102] installing pkg-config-0.29.2-1.5
[   29s] [50/102] installing build-compare-2023.06.18-1.1
[   29s] [51/102] installing hal-rootstrap-checker-0.1.1-1.1
[   29s] [52/102] installing asan-build-env-14.2.0-1.1
[   29s] libasan.so is already preloaded
[   29s] [53/102] installing cpp-14.2.0-1.6
[   30s] [54/102] installing gcc-c++-14.2.0-1.6
[   30s] [55/102] installing gawk-3.1.5-1.1
[   30s] [56/102] installing grep-2.5.2-1.4
[   31s] [57/102] installing libacl-2.3.2-1.4
[   31s] [58/102] installing libelf-0.189-1.6
[   31s] [59/102] installing make-4.4.1-1.4
[   31s] [60/102] installing nss-certs-3.109-1.6
[   32s] [61/102] installing smack-1.3.1-1.4
[   32s] [62/102] installing binutils-libs-2.43-1.6
[   32s] [63/102] installing bzip2-1.0.8-1.5
[   32s] [64/102] installing coreutils-6.9-14.1
[   33s] [65/102] installing libmagic-5.45-1.5
[   33s] [66/102] installing libmount-2.39.3-1.5
[   33s] [67/102] installing perl-5.38.0-1.4
[   35s] [68/102] installing xz-5.6.3-1.6
[   35s] [69/102] installing libfdisk-2.39.3-1.5
[   35s] [70/102] installing gcc-14.2.0-1.6
[   36s] [71/102] installing build-mkbaselibs-20120927-1.1
[   36s] [72/102] installing linux-glibc-devel-6.6-1.6
[   37s] [73/102] installing tar-1.17-2.1
[   37s] [74/102] installing terminfo-base-full-6.4-1.6
[   37s] [75/102] installing autoconf-2.71-1.6
[   37s] [76/102] installing file-5.45-1.5
[   37s] [77/102] installing glibc-locale-2.40-1.6
[   38s] [78/102] installing gzip-1.13-1.4
[   38s] [79/102] installing perl-DBI-1.628-1.1
[   38s] [80/102] installing binutils-2.43-1.6
[   39s] [81/102] installing tzdata-2024b-1.1
[   39s] [82/102] installing pam-1.1.6-1.5
[   40s] [83/102] installing libdw-0.189-1.6
[   40s] [84/102] installing libarchive-3.7.7-1.5
[   41s] [85/102] installing automake-1.16.5-1.5
[   41s] [86/102] installing libasm-0.189-1.6
[   41s] [87/102] installing build-20120927-1.1
[   42s] [88/102] installing libncurses6-6.4-1.6
[   43s] [89/102] installing libncurses-6.4-1.6
[   44s] [90/102] installing less-668-1.1
[   44s] [91/102] installing libreadline-5.2-1.5
[   44s] [92/102] installing libtool-2.4.7-1.6
[   45s] [93/102] installing elfutils-0.189-1.6
[   45s] [94/102] installing util-linux-2.39.3-1.5
[   46s] [95/102] installing util-linux-su-2.39.3-1.5
[   46s] [96/102] installing libxcrypt-devel-4.4.36-1.6
[   46s] [97/102] installing nss-3.109-1.6
[   46s] [98/102] installing glibc-devel-2.40-1.6
[   46s] [99/102] installing libsoftokn3-3.109-1.6
[   46s] [100/102] installing rpm-4.14.1.1-1.6
[   48s] [101/102] installing asan-force-options-14.2.0-1.1
[   48s] [102/102] installing rpm-build-4.14.1.1-1.6
[   48s] now finalizing build dir...
[   49s] -----------------------------------------------------------------
[   49s] I have the following modifications for perl-DBD-SQLite.spec:
[   49s] 22c22
[   49s] < Release:        0
[   49s] ---
[   49s] > Release:        1.1
[   49s] -----------------------------------------------------------------
[   49s] ----- building perl-DBD-SQLite.spec (user abuild)
[   49s] -----------------------------------------------------------------
[   49s] -----------------------------------------------------------------
[   49s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X-ASAN/standard/4fb418fbb3d4945c6ef63c7af57f58a8-perl-DBD-SQLite' /home/abuild/rpmbuild/SOURCES/perl-DBD-SQLite.spec
[   50s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.qvCQup
[   50s] + umask 022
[   50s] + cd /home/abuild/rpmbuild/BUILD
[   50s] + cd /home/abuild/rpmbuild/BUILD
[   50s] + rm -rf DBD-SQLite-1.50
[   50s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/DBD-SQLite-1.50.tar.gz
[   50s] + /bin/tar -xof -
[   50s] + STATUS=0
[   50s] + '[' 0 -ne 0 ']'
[   50s] + cd DBD-SQLite-1.50
[   50s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
[   50s] + echo 'Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):'
[   50s] Patch #0 (0001-SQLite-fix-error-by-Wimplicit-function-declaration.patch):
[   50s] + /bin/patch --no-backup-if-mismatch -p1 --fuzz=2
[   50s] patching file SQLite.xs
[   50s] + find . -type f '!' -name '*.pl' -print0
[   50s] + xargs -0 chmod 644
[   50s] + exit 0
[   50s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.thiqLy
[   50s] + umask 022
[   50s] + cd /home/abuild/rpmbuild/BUILD
[   50s] + cd DBD-SQLite-1.50
[   50s] + ref=/usr/lib/rpm
[   50s] + mints=0
[   50s] + case $(uname -m) in
[   50s] ++ uname -m
[   50s] + for s in guess sub
[   50s] ++ find -maxdepth 8 -name config.guess
[   50s] + for s in guess sub
[   50s] ++ find -maxdepth 8 -name config.sub
[   50s] + LANG=C
[   50s] + export LANG
[   50s] + unset DISPLAY
[   50s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   50s] + export CFLAGS
[   50s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   50s] + export CXXFLAGS
[   50s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -I%_fmoddir'
[   50s] + export FFLAGS
[   50s] + LDFLAGS=
[   50s] + export LDFLAGS
[   50s] + /bin/perl Makefile.PL INSTALLDIRS=vendor 'OPTIMIZE=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g'
[   50s] Checking if your kit is complete...
[   50s] Looks good
[   50s] Using DBI 1.628 (for perl 5.038000 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBI/
[   50s] Generating a Unix-style Makefile
[   50s] Writing Makefile for DBD::SQLite
[   50s] Writing MYMETA.yml and MYMETA.json
[   50s] + /bin/make -j12
[   50s] "/usr/bin/perl" -p -e "s/~DRIVER~/SQLite/g" /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBI/Driver.xst > SQLite.xsi
[   50s] Running Mkbootstrap for SQLite ()
[   50s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 dbdimp.c
[   50s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 sqlite3.c
[   50s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp"  -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' -typemap '/home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/typemap'  SQLite.xs > SQLite.xsc
[   50s] chmod 644 "SQLite.bs"
[   50s] cp lib/DBD/SQLite/VirtualTable.pm blib/lib/DBD/SQLite/VirtualTable.pm
[   50s] cp lib/DBD/SQLite/VirtualTable/FileContent.pm blib/lib/DBD/SQLite/VirtualTable/FileContent.pm
[   50s] cp lib/DBD/SQLite/Cookbook.pod blib/lib/DBD/SQLite/Cookbook.pod
[   50s] cp lib/DBD/SQLite.pm blib/lib/DBD/SQLite.pm
[   50s] cp lib/DBD/SQLite/Fulltext_search.pod blib/lib/DBD/SQLite/Fulltext_search.pod
[   50s] cp lib/DBD/SQLite/Constants.pm blib/lib/DBD/SQLite/Constants.pm
[   50s] cp lib/DBD/SQLite/VirtualTable/PerlData.pm blib/lib/DBD/SQLite/VirtualTable/PerlData.pm
[   50s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[   51s] In file included from SQLiteXS.h:11,
[   51s]                  from dbdimp.c:6:
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[   51s]  1059 | #define PERL_USE_SAFE_PUTENV
[   51s]       |         ^~~~~~~~~~~~~~~~~~~~
[   51s] <command-line>: note: this is the location of the previous definition
[   51s] mv SQLite.xsc SQLite.c
[   51s] cc -c  -I. -I/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-Bsymbolic -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types --param=ssp-buffer-size=4 -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE"  -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_FTS3_PARENTHESIS -DSQLITE_ENABLE_RTREE -DSQLITE_ENABLE_COLUMN_METADATA -DSQLITE_ENABLE_STAT3 -DSQLITE_ENABLE_STAT4 -DSQLITE_ENABLE_JSON1 -DNDEBUG=1 -DHAVE_USLEEP=1 SQLite.c
[   51s] In file included from SQLiteXS.h:11,
[   51s]                  from SQLite.xs:3:
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined
[   51s]  1059 | #define PERL_USE_SAFE_PUTENV
[   51s]       |         ^~~~~~~~~~~~~~~~~~~~
[   51s] <command-line>: note: this is the location of the previous definition
[   51s] dbdimp.c: In function 'sqlite_db_do_sv':
[   51s] dbdimp.c:485:9: warning: unused variable 'i' [-Wunused-variable]
[   51s]   485 |     int i;
[   51s]       |         ^
[   51s] dbdimp.c: In function 'sqlite_db_disconnect':
[   51s] dbdimp.c:636:17: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[   51s]   636 |         while ( s = imp_dbh->stmt_list ) {
[   51s]       |                 ^
[   51s] dbdimp.c:651:12: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
[   51s]   651 |     while( s = imp_dbh->stmt_list ) {
[   51s]       |            ^
[   51s] dbdimp.c: In function 'sqlite_st_prepare_sv':
[   51s] dbdimp.c:865:9: warning: the address of 'extra' will always evaluate as 'true' [-Waddress]
[   51s]   865 |     if (&extra && imp_dbh->allow_multiple_statements) {
[   51s]       |         ^
[   51s] In file included from /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/perl.h:6168:
[   51s] dbdimp.c: In function 'sqlite_db_func_dispatcher':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1635:9: note: in expansion of macro 'POPs'
[   51s]  1635 |         POPs;
[   51s]       |         ^~~~
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1643:13: note: in expansion of macro 'POPs'
[   51s]  1643 |             POPs;
[   51s]       |             ^~~~
[   51s] dbdimp.c: In function 'sqlite_db_aggr_new_dispatcher':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1820:9: note: in expansion of macro 'POPs'
[   51s]  1820 |         POPs;
[   51s]       |         ^~~~
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1828:13: note: in expansion of macro 'POPs'
[   51s]  1828 |             POPs;
[   51s]       |             ^~~~
[   51s] dbdimp.c: In function 'sqlite_db_aggr_step_dispatcher':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1885:7: note: in expansion of macro 'POPs'
[   51s]  1885 |       POPs;
[   51s]       |       ^~~~
[   51s] dbdimp.c: In function 'sqlite_db_aggr_finalize_dispatcher':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1926:13: note: in expansion of macro 'POPs'
[   51s]  1926 |             POPs;
[   51s]       |             ^~~~
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/pp.h:162:26: warning: value computed is not used [-Wunused-value]
[   51s]   162 | #define POPs            (*sp--)
[   51s]       |                         ~^~~~~~
[   51s] dbdimp.c:1933:17: note: in expansion of macro 'POPs'
[   51s]  1933 |                 POPs;
[   51s]       |                 ^~~~
[   51s] dbdimp.c: In function 'sqlite_db_trace_dispatcher':
[   51s] dbdimp.c:2413:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[   51s]  2413 |     int retval = 0;
[   51s]       |         ^~~~~~
[   51s] dbdimp.c: In function 'sqlite_db_profile_dispatcher':
[   51s] dbdimp.c:2471:9: warning: variable 'retval' set but not used [-Wunused-but-set-variable]
[   51s]  2471 |     int retval = 0;
[   51s]       |         ^~~~~~
[   51s] dbdimp.c: In function 'perl_tokenizer_Next':
[   51s] dbdimp.c:2803:12: warning: unused variable 'n_a' [-Wunused-variable]
[   51s]  2803 |     STRLEN n_a; /* this is required for older perls < 5.8.8 */
[   51s]       |            ^~~
[   51s] dbdimp.c: In function 'sqlite_db_destroy_module_data':
[   51s] dbdimp.c:3664:9: warning: unused variable 'rc' [-Wunused-variable]
[   51s]  3664 |     int rc = SQLITE_ERROR;
[   51s]       |         ^~
[   51s] In file included from SQLiteXS.h:17:
[   51s] dbdimp.h: At top level:
[   51s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[   51s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[   51s]       | ^~~~~~~~~~~~
[   51s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[   51s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[   51s]       | ^~~~~~~~~~~
[   51s] In file included from SQLiteXS.h:12:
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_last_insert_rowid':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:198:5: note: in expansion of macro 'dXSI32'
[   51s]   198 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_create_function':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:223:5: note: in expansion of macro 'dXSI32'
[   51s]   223 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_enable_load_extension':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:264:5: note: in expansion of macro 'dXSI32'
[   51s]   264 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_load_extension':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:290:5: note: in expansion of macro 'dXSI32'
[   51s]   290 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_create_aggregate':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:325:5: note: in expansion of macro 'dXSI32'
[   51s]   325 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_create_collation':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:363:5: note: in expansion of macro 'dXSI32'
[   51s]   363 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_collation_needed':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:391:5: note: in expansion of macro 'dXSI32'
[   51s]   391 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_progress_handler':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:413:5: note: in expansion of macro 'dXSI32'
[   51s]   413 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_profile':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:466:5: note: in expansion of macro 'dXSI32'
[   51s]   466 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_commit_hook':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:492:5: note: in expansion of macro 'dXSI32'
[   51s]   492 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_rollback_hook':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:517:5: note: in expansion of macro 'dXSI32'
[   51s]   517 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_update_hook':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:542:5: note: in expansion of macro 'dXSI32'
[   51s]   542 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_set_authorizer':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:567:5: note: in expansion of macro 'dXSI32'
[   51s]   567 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_busy_timeout':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:593:5: note: in expansion of macro 'dXSI32'
[   51s]   593 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_from_file':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:623:5: note: in expansion of macro 'dXSI32'
[   51s]   623 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_backup_to_file':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:647:5: note: in expansion of macro 'dXSI32'
[   51s]   647 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_table_column_metadata':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:671:5: note: in expansion of macro 'dXSI32'
[   51s]   671 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_db_filename':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:702:5: note: in expansion of macro 'dXSI32'
[   51s]   702 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_register_fts3_perl_tokenizer':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:723:5: note: in expansion of macro 'dXSI32'
[   51s]   723 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_db_status':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:745:5: note: in expansion of macro 'dXSI32'
[   51s]   745 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__db_create_module':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:778:5: note: in expansion of macro 'dXSI32'
[   51s]   778 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite__st_st_status':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:197:20: warning: unused variable 'ix' [-Wunused-variable]
[   51s]   197 | #define dXSI32 I32 ix = XSANY.any_i32
[   51s]       |                    ^~
[   51s] SQLite.c:806:5: note: in expansion of macro 'dXSI32'
[   51s]   806 |     dXSI32;
[   51s]       |     ^~~~~~
[   51s] SQLite.c: In function 'XS_DBD__SQLite_compile_options':
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/XSUB.h:189:28: warning: unused variable 'targ' [-Wunused-variable]
[   51s]   189 | #define dXSTARG SV * const targ = ((PL_op->op_private & OPpENTERSUB_HASTARG) \
[   51s]       |                            ^~~~
[   51s] SQLite.c:843:9: note: in expansion of macro 'dXSTARG'
[   51s]   843 |         dXSTARG;
[   51s]       |         ^~~~~~~
[   51s] SQLite.c:842:17: warning: unused variable 'RETVAL' [-Wunused-variable]
[   51s]   842 |         int     RETVAL;
[   51s]       |                 ^~~~~~
[   51s] ./SQLite.xsi: In function 'XS_DBD__SQLite__db_selectrow_arrayref':
[   51s] ./SQLite.xsi:208:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[   51s]   208 |         if (GIMME == G_SCALAR)
[   51s]       |         ^~
[   51s] In file included from /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/perl.h:6188:
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[   51s]  1019 | Perl_dowantarray(pTHX)
[   51s]       | ^~~~~~~~~~~~~~~~
[   51s] ./SQLite.xsi:214:9: warning: 'Perl_dowantarray' is deprecated [-Wdeprecated-declarations]
[   51s]   214 |         if (GIMME == G_SCALAR)
[   51s]       |         ^~
[   51s] /usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/CORE/proto.h:1019:1: note: declared here
[   51s]  1019 | Perl_dowantarray(pTHX)
[   51s]       | ^~~~~~~~~~~~~~~~
[   52s] In file included from SQLiteXS.h:17:
[   52s] dbdimp.h: At top level:
[   52s] dbdimp.h:149:1: warning: 'newUTF8SVpvn' defined but not used [-Wunused-function]
[   52s]   149 | newUTF8SVpvn(char *s, STRLEN len) {
[   52s]       | ^~~~~~~~~~~~
[   52s] dbdimp.h:139:1: warning: 'newUTF8SVpv' defined but not used [-Wunused-function]
[   52s]   139 | newUTF8SVpv(char *s, STRLEN len) {
[   52s]       | ^~~~~~~~~~~
[   52s] dbdimp.c: In function 'perl_vt_Eof':
[   52s] dbdimp.c:3378:12: warning: 'eof' may be used uninitialized [-Wmaybe-uninitialized]
[   52s]  3378 |     return eof;
[   52s]       |            ^~~
[   52s] dbdimp.c:3354:16: note: 'eof' was declared here
[   52s]  3354 |     int count, eof;
[   52s]       |                ^~~
[   55s] sqlite3.c: In function 'sqlite3DefaultRowEst':
[   55s] sqlite3.c:97173:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[   55s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[   55s]       |   ^~
[   55s] In file included from sqlite3.c:9670:
[   55s] sqlite3.c:97173:35: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[   55s] 97173 |   if( a[0]<33 ) a[0] = 33;        assert( 33==sqlite3LogEst(10) );
[   55s]       |                                   ^~~~~~
[   61s] sqlite3.c: In function 'whereRangeScanEst':
[   61s] sqlite3.c:124048:11: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
[   61s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[   61s]        |           ^~
[   61s] sqlite3.c:124048:47: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
[   61s] 124048 |           if( iLwrIdx==iUprIdx ) nNew -= 20;  assert( 20==sqlite3LogEst(4) );
[   61s]        |                                               ^~~~~~
[   94s] sqlite3.c: In function 'sqlite3SelectNew':
[   94s] sqlite3.c:109810:10: warning: function may return address of local variable [-Wreturn-local-addr]
[   94s] 109810 |   return pNew;
[   94s]        |          ^~~~
[   94s] sqlite3.c:109778:10: note: declared here
[   94s] 109778 |   Select standin;
[   94s]        |          ^~~~~~~
[  189s] rm -f blib/arch/auto/DBD/SQLite/SQLite.so
[  189s] cc  -shared -O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -fdiagnostics-color=never -m64 -march=nehalem -msse4.2 -mfpmath=sse -fasynchronous-unwind-tables -fno-omit-frame-pointer -g -Wall -pipe -L/usr/local/lib -Wl,-Bsymbolic  SQLite.o dbdimp.o sqlite3.o  -o blib/arch/auto/DBD/SQLite/SQLite.so  \
[  189s]       \
[  189s]   
[  190s] chmod 755 blib/arch/auto/DBD/SQLite/SQLite.so
[  190s] Manifying 7 pod documents
[  190s] + exit 0
[  190s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.sCFgrm
[  190s] + umask 022
[  190s] + cd /home/abuild/rpmbuild/BUILD
[  190s] + cd DBD-SQLite-1.50
[  190s] + LANG=C
[  190s] + export LANG
[  190s] + unset DISPLAY
[  190s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64
[  190s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64
[  190s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64 install_vendor
[  191s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- SQLite.bs blib/arch/auto/DBD/SQLite/SQLite.bs 644
[  191s] Manifying 7 pod documents
[  191s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite.pm
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Constants.pm
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::VirtualTable.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::VirtualTable::PerlData.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::Fulltext_search.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::VirtualTable::FileContent.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::Constants.3
[  191s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man/man3/DBD::SQLite::Cookbook.3
[  191s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/perllocal.pod
[  191s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto
[  191s] + find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto -name .packlist -print0
[  191s] + xargs -0 -r rm
[  191s] + '[' x86_64 == noarch ']'
[  191s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/5.38.0/x86_64-linux-thread-multi/perllocal.pod
[  191s] + FILES=perl-DBD-SQLite.files
[  191s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f
[  191s] + RES=
[  191s] + '[' -n '' ']'
[  191s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/
[  191s] ++ sort
[  191s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] + continue
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD
[  191s] + el=x86_64-linux-thread-multi/DBD
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi/DBD/SQLite
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi/DBD/SQLite/VirtualTable
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi/auto
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi/auto/DBD
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  191s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite
[  191s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  191s] + el=x86_64-linux-thread-multi/auto/DBD/SQLite
[  191s] + all_dir=(${all_dir[@]} $el)
[  191s] + for dir in '`find ${base_dir} -type d | sort`'
[  191s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  192s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  192s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share
[  192s] + el=x86_64-linux-thread-multi/auto/share
[  192s] + all_dir=(${all_dir[@]} $el)
[  192s] + for dir in '`find ${base_dir} -type d | sort`'
[  192s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  192s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist
[  192s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  192s] + el=x86_64-linux-thread-multi/auto/share/dist
[  192s] + all_dir=(${all_dir[@]} $el)
[  192s] + for dir in '`find ${base_dir} -type d | sort`'
[  192s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite = /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ ']'
[  192s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  192s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}'
[  192s] + el=x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  192s] + all_dir=(${all_dir[@]} $el)
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi -maxdepth 1 -type f
[  192s] + RES=
[  192s] + '[' -n '' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/DBD = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD -maxdepth 1 -type f
[  192s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite.pm
[  192s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite.pm ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite.pm
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite.pm
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/DBD/SQLite = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite -maxdepth 1 -type f
[  192s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Constants.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod'
[  192s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Constants.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable.pm
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Constants.pm
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Constants.pm
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Cookbook.pod
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/Fulltext_search.pod
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/DBD/SQLite/VirtualTable = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable -maxdepth 1 -type f
[  192s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm'
[  192s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/PerlData.pm
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/DBD/SQLite/VirtualTable/FileContent.pm
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + continue
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto/DBD = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD -maxdepth 1 -type f
[  192s] + RES=
[  192s] + '[' -n '' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto/DBD/SQLite = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD/SQLite ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD/SQLite -maxdepth 1 -type f
[  192s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  192s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto/share = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share -maxdepth 1 -type f
[  192s] + RES=
[  192s] + '[' -n '' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto/share/dist = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist -maxdepth 1 -type f
[  192s] + RES=
[  192s] + '[' -n '' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist
[  192s] + /bin/cat
[  192s] + for i in '${all_dir[@]}'
[  192s] + '[' x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite = auto ']'
[  192s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite = /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite ']'
[  192s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite -maxdepth 1 -type f
[  192s] + RES='/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h'
[  192s] + '[' -n '/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  192s] /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h' ']'
[  192s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.c
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3ext.h
[  192s] + /bin/cat
[  192s] + for file in '$RES'
[  192s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0//x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  192s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/share/dist/DBD-SQLite/sqlite3.h
[  192s] + /bin/cat
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/man ']'
[  192s] + fgen_file '/usr/share/man/man?/*'
[  192s] + /bin/cat
[  192s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/var/adm/perl-modules/perl-DBD-SQLite ']'
[  192s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/bin ']'
[  192s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 1.50-1.1 --unique-debug-src-base perl-DBD-SQLite-1.50-1.1.x86_64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50
[  192s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/lib64/perl5/vendor_perl/5.38.0/x86_64-linux-thread-multi/auto/DBD/SQLite/SQLite.so
[  192s] 14208 blocks
[  193s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debuginfo.manifest
[  193s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/perl-DBD-SQLite-debugsource.manifest
[  193s] + /usr/lib/rpm/check-buildroot
[  193s] + /usr/lib/rpm//brp-compress
[  193s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip
[  194s] + /usr/lib/rpm/brp-python-hardlink
[  194s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64
[  194s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/DBD-SQLite-1.50/isu.list
[  194s] ~/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64 ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  194s] ~/rpmbuild/BUILD/DBD-SQLite-1.50
[  194s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES
[  201s] Executing(%check): /bin/sh -e /var/tmp/rpm-tmp.v4KZYX
[  201s] Processing files: perl-DBD-SQLite-1.50-1.1.x86_64
[  201s] Executing(%doc): /bin/sh -e /var/tmp/rpm-tmp.Q9vZVf
[  201s] + umask 022
[  201s] + cd /home/abuild/rpmbuild/BUILD
[  201s] + cd DBD-SQLite-1.50
[  201s] + DOCDIR=/home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + export LC_ALL=C
[  201s] + LC_ALL=C
[  201s] + export DOCDIR
[  201s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + cp -pr Changes /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + cp -pr constants.inc /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + cp -pr LICENSE /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + cp -pr README /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64/usr/share/doc/packages/perl-DBD-SQLite
[  201s] + exit 0
[  201s] Provides: perl(DBD::SQLite) = 1.50 perl(DBD::SQLite::Constants) perl(DBD::SQLite::VirtualTable) = 1.50 perl(DBD::SQLite::VirtualTable::Cursor) perl(DBD::SQLite::VirtualTable::FileContent) perl(DBD::SQLite::VirtualTable::FileContent::Cursor) perl(DBD::SQLite::VirtualTable::PerlData) perl(DBD::SQLite::VirtualTable::PerlData::Cursor) perl-DBD-SQLite = 1.50-1.1 perl-DBD-SQLite(x86-64) = 1.50-1.1
[  201s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  201s] Requires: libasan.so.8()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.28)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.33)(64bit) libc.so.6(GLIBC_2.34)(64bit) libc.so.6(GLIBC_2.4)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libgcc_s.so.1(GCC_3.3.1)(64bit)
[  201s] Processing files: perl-DBD-SQLite-debugsource-1.50-1.1.x86_64
[  201s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  201s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  201s] 
[  201s] Provides: perl-DBD-SQLite-debugsource = 1.50-1.1 perl-DBD-SQLite-debugsource(x86-64) = 1.50-1.1
[  201s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  201s] Processing files: perl-DBD-SQLite-debuginfo-1.50-1.1.x86_64
[  201s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv
[  201s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K
[  201s] 
[  201s] Provides: perl-DBD-SQLite-debuginfo = 1.50-1.1 perl-DBD-SQLite-debuginfo(x86-64) = 1.50-1.1
[  201s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
[  201s] Recommends: perl-DBD-SQLite-debugsource(x86-64) = 1.50-1.1
[  201s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64
[  202s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-DBD-SQLite-1.50-1.1.src.rpm
[  204s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/perl-DBD-SQLite-1.50-1.1.x86_64.rpm
[  206s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/perl-DBD-SQLite-debugsource-1.50-1.1.x86_64.rpm
[  208s] Wrote: /home/abuild/rpmbuild/RPMS/x86_64/perl-DBD-SQLite-debuginfo-1.50-1.1.x86_64.rpm
[  208s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.lDCBat
[  208s] + umask 022
[  208s] + cd /home/abuild/rpmbuild/BUILD
[  208s] + cd DBD-SQLite-1.50
[  208s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-DBD-SQLite-1.50-1.1.x86_64
[  208s] + exit 0
[  208s] ... checking for files with abuild user/group
[  209s] ... creating baselibs
[  209s] 
[  209s] 8318a75e8ca9 finished "build perl-DBD-SQLite.spec" at Tue Jul 15 16:05:59 UTC 2025.
[  209s] 

Retried build at Tue Jul 15 17:15:37 2025 returned same result, skipped

Retried build at Thu Jul 24 13:46:48 2025 returned same result, skipped

Retried build at Tue Aug  5 08:27:48 2025 returned same result, skipped

Retried build at Wed Aug 13 01:56:34 2025 returned same result, skipped

Retried build at Mon Aug 18 13:30:48 2025 returned same result, skipped

Retried build at Mon Aug 25 13:38:16 2025 returned same result, skipped

Retried build at Thu Aug 28 21:11:11 2025 returned same result, skipped