[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.26 [ 0s] Using BUILD_ARCH=armv7l:armv6l:armv5tel [ 0s] [ 1s] [ 1s] befb69554a05 started "build attr.spec" at Wed Sep 24 14:05:08 UTC 2025. [ 1s] [ 1s] Building attr for project 'Tizen-Base-X-ASAN' repository 'standard' arch 'armv7l' srcmd5 'f69b999b2a3a866dcb8cbe129b4766ac' [ 1s] [ 1s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.26/.build-srcdir/attr.spec ... [ 1s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.26/.build-srcdir/attr.spec [ 1s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/26/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.26/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.26/.build-srcdir/attr.spec build ... [ 13s] registering binfmt handlers for cross build [ 16s] cycle: nss -> libsoftokn3 [ 16s] breaking dependency nss -> libsoftokn3 [ 16s] [1/47] preinstalling libmagic-data... [ 16s] [2/47] preinstalling libncurses... [ 16s] [3/47] preinstalling setup... [ 16s] [4/47] preinstalling filesystem... [ 16s] [5/47] preinstalling glibc... [ 17s] [6/47] preinstalling libgcc... [ 17s] [7/47] preinstalling libstdc++... [ 17s] [8/47] preinstalling libasan... [ 17s] [9/47] preinstalling bash... [ 17s] [10/47] preinstalling diffutils... [ 17s] [11/47] preinstalling findutils... [ 17s] [12/47] preinstalling grep... [ 17s] [13/47] preinstalling libattr... [ 18s] [14/47] preinstalling libblkid... [ 18s] [15/47] preinstalling libbz2... [ 18s] [16/47] preinstalling libcap... [ 18s] [17/47] preinstalling libfreebl3... [ 18s] [18/47] preinstalling liblua... [ 19s] [19/47] preinstalling liblzma... [ 19s] [20/47] preinstalling libpopt... [ 19s] [21/47] preinstalling libreadline... [ 19s] [22/47] preinstalling libsmack... [ 19s] [23/47] preinstalling libsqlite... [ 19s] [24/47] preinstalling libuuid... [ 19s] [25/47] preinstalling libxcrypt... [ 19s] [26/47] preinstalling libxml2... [ 19s] [27/47] preinstalling libzstd1... [ 20s] [28/47] preinstalling nspr... [ 20s] [29/47] preinstalling sed... [ 20s] [30/47] preinstalling zlib... [ 20s] [31/47] preinstalling qemu-accel-x86_64-armv7l... [ 55s] [32/47] preinstalling qemu-linux-user-x86_64-cross... [ 57s] [33/47] preinstalling asan-build-env... [ 58s] [34/47] preinstalling coreutils... [ 58s] [35/47] preinstalling libacl... [ 58s] [36/47] preinstalling libelf... [ 58s] [37/47] preinstalling libmount... [ 58s] [38/47] preinstalling smack... [ 58s] [39/47] preinstalling bzip2... [ 58s] [40/47] preinstalling libmagic... [ 58s] [41/47] preinstalling tar... [ 58s] [42/47] preinstalling util-linux... [ 59s] [43/47] preinstalling util-linux-su... [ 59s] [44/47] preinstalling nss... [ 59s] [45/47] preinstalling libsoftokn3... [ 59s] [46/47] preinstalling rpm... [ 60s] [47/47] preinstalling asan-force-options... [ 61s] running qemu-linux-user-x86_64-cross postinstall script [ 61s] running qemu-accel-x86_64-armv7l postinstall script [ 61s] mv: cannot stat `/usr/lib/gcc/armv7l-tizen-linux-gnueabi/14.2.0/liblto_plugin.so': No such file or directory [ 61s] running setup postinstall script [ 61s] chroot: failed to run command '': No such file or directory [ 61s] running asan-build-env postinstall script [ 62s] running asan-force-options postinstall script [ 65s] initializing rpm db... [ 66s] reordering...cycle: bash -> glibc -> filesystem -> setup -> asan-runtime-env [ 66s] breaking dependency bash -> glibc [ 66s] cycle: bash -> libasan -> glibc -> filesystem -> setup -> asan-runtime-env [ 66s] breaking dependency libasan -> glibc [ 66s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 66s] breaking dependency asan-runtime-env -> bash [ 66s] cycle: bash -> libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency coreutils -> bash [ 66s] cycle: glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency coreutils -> glibc [ 66s] cycle: libasan -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency libasan -> libgcc [ 66s] cycle: libasan -> libstdc++ -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency libstdc++ -> glibc [ 66s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency coreutils -> libasan [ 66s] cycle: libgcc -> glibc -> filesystem -> setup -> asan-runtime-env -> coreutils [ 66s] breaking dependency asan-runtime-env -> coreutils [ 66s] cycle: libasan -> libstdc++ -> libgcc -> glibc -> filesystem -> setup -> asan-runtime-env [ 66s] breaking dependency setup -> asan-runtime-env [ 66s] cycle: glibc-devel -> libxcrypt-devel [ 66s] breaking dependency libxcrypt-devel -> glibc-devel [ 66s] cycle: nss -> libsoftokn3 [ 66s] breaking dependency nss -> libsoftokn3 [ 66s] done [ 66s] querying package ids... [ 67s] [1/102] installing libmagic-data-5.45-1.17 [ 68s] [2/102] installing setup-0.9-1.7 [ 69s] warning: /etc/profile created as /etc/profile.rpmnew [ 69s] [3/102] installing filesystem-3.1-1.1 [ 69s] [4/102] installing glibc-2.40-2.4 [ 71s] [5/102] installing libgcc-14.2.0-5.1 [ 72s] [6/102] installing libatomic-14.2.0-5.1 [ 72s] [7/102] installing libgfortran-14.2.0-5.1 [ 73s] [8/102] installing libgomp-14.2.0-5.1 [ 74s] [9/102] installing libitm-14.2.0-5.1 [ 74s] [10/102] installing libstdc++-14.2.0-5.1 [ 75s] [11/102] installing coreutils-6.9-14.7 [ 77s] [12/102] installing libstdc++-devel-14.2.0-5.1 [ 78s] [13/102] installing linux-glibc-devel-6.6-1.23 [ 79s] [14/102] installing libasan-14.2.0-5.1 [ 80s] [15/102] installing libcc1-14.2.0-5.1 [ 80s] [16/102] installing libubsan-14.2.0-5.1 [ 81s] [17/102] installing asan-runtime-env-14.2.0-1.18 [ 81s] [18/102] installing bash-3.2.57-1.1 [ 82s] [19/102] installing cpio-2.8-1.3 [ 82s] [20/102] installing diffutils-3.10-1.1 [ 82s] [21/102] installing findutils-4.3.8-1.23 [ 82s] [22/102] installing gdbm-1.8.3-1.25 [ 83s] [23/102] installing hostname-3.23-1.2 [ 83s] [24/102] installing libattr-2.5.1-1.23 [ 84s] [25/102] installing libblkid-2.39.3-1.18 [ 84s] [26/102] installing libbz2-1.0.8-1.24 [ 85s] [27/102] installing libcap-2.73-1.18 [ 85s] [28/102] installing libfreebl3-3.109-1.22 [ 86s] [29/102] installing libltdl-2.4.7-1.23 [ 86s] [30/102] installing liblua-5.1.5-1.19 [ 87s] [31/102] installing liblzma-5.6.3-1.24 [ 87s] [32/102] installing libopenssl3-3.0.16-1.14 [ 88s] [33/102] installing libpcre-8.45-1.23 [ 89s] [34/102] installing libpopt-1.16-1.17 [ 89s] [35/102] installing libsmack-1.3.1-1.17 [ 90s] [36/102] installing libsmartcols-2.39.3-1.18 [ 90s] [37/102] installing libsqlite-3.50.2-1.11 [ 91s] [38/102] installing libuuid-2.39.3-1.18 [ 92s] [39/102] installing libxcrypt-4.4.36-1.22 [ 92s] [40/102] installing libxml2-2.13.5-1.19 [ 93s] [41/102] installing libzstd1-1.5.6-1.19 [ 94s] [42/102] installing m4-1.4.19-1.1 [ 94s] [43/102] installing net-tools-2.0_20121208git-1.18 [ 94s] [44/102] installing nspr-4.36-1.19 [ 95s] [45/102] installing patch-2.7.6-1.17 [ 95s] [46/102] installing pkg-config-0.29.2-1.24 [ 95s] [47/102] installing sed-4.1c-1.19 [ 96s] [48/102] installing update-alternatives-1.22.2-1.1 [ 96s] [49/102] installing which-2.17-1.3 [ 96s] [50/102] installing zlib-1.3.1-1.24 [ 97s] [51/102] installing build-compare-2023.06.18-1.8 [ 97s] [52/102] installing hal-rootstrap-checker-0.1.1-1.1 [ 97s] [53/102] installing qemu-linux-user-x86_64-cross-9.2.3-1.8 [ 99s] [54/102] installing asan-build-env-14.2.0-1.18 [ 99s] libasan.so is already preloaded [ 99s] [55/102] installing cpp-14.2.0-5.1 [ 100s] [56/102] installing gcc-c++-14.2.0-5.1 [ 101s] [57/102] installing terminfo-base-full-6.4-1.25 [ 101s] [58/102] installing glibc-locale-2.40-2.4 [ 102s] [59/102] installing libxcrypt-devel-4.4.36-1.22 [ 102s] [60/102] installing binutils-libs-2.43-1.23 [ 103s] [61/102] installing gawk-3.1.5-1.1 [ 103s] [62/102] installing grep-2.5.2-1.16 [ 103s] [63/102] installing libacl-2.3.2-1.21 [ 104s] [64/102] installing libelf-0.189-1.24 [ 104s] [65/102] installing libmount-2.39.3-1.18 [ 105s] [66/102] installing make-4.4.1-1.19 [ 106s] [67/102] installing nss-certs-3.109-1.22 [ 106s] [68/102] installing smack-1.3.1-1.17 [ 106s] [69/102] installing bzip2-1.0.8-1.24 [ 106s] [70/102] installing gzip-1.3.12-1.13 [ 107s] [71/102] installing libfdisk-2.39.3-1.18 [ 108s] [72/102] installing libmagic-5.45-1.17 [ 109s] [73/102] installing perl-5.38.0-1.20 [ 117s] [74/102] installing xz-5.6.3-1.24 [ 117s] [75/102] installing pam-1.1.6-1.18 [ 119s] [76/102] installing tzdata-2024b-1.1 [ 121s] [77/102] installing gcc-14.2.0-5.1 [ 125s] [78/102] installing build-mkbaselibs-20120927-1.1 [ 125s] [79/102] installing qemu-accel-x86_64-armv7l-0.4-1.7 [ 172s] [80/102] installing autoconf-2.71-1.24 [ 172s] [81/102] installing glibc-devel-2.40-2.4 [ 173s] [82/102] installing file-5.45-1.17 [ 173s] [83/102] installing tar-1.17-1.1 [ 173s] [84/102] installing binutils-2.43-1.23 [ 175s] [85/102] installing libncurses6-6.4-1.25 [ 175s] [86/102] installing libdw-0.189-1.24 [ 176s] [87/102] installing nss-3.109-1.22 [ 177s] [88/102] installing libarchive-3.8.1-1.14 [ 177s] [89/102] installing libncurses-6.4-1.25 [ 178s] [90/102] installing automake-1.16.5-1.22 [ 178s] [91/102] installing less-668-1.1 [ 179s] [92/102] installing libreadline-5.2-1.23 [ 180s] [93/102] installing build-20120927-1.1 [ 180s] [94/102] installing libasm-0.189-1.24 [ 180s] [95/102] installing libsoftokn3-3.109-1.22 [ 181s] [96/102] installing rpm-4.14.1.1-1.22 [ 184s] [97/102] installing asan-force-options-14.2.0-1.18 [ 189s] [98/102] installing libtool-2.4.7-1.23 [ 190s] [99/102] installing elfutils-0.189-1.24 [ 190s] [100/102] installing util-linux-2.39.3-1.18 [ 191s] [101/102] installing rpm-build-4.14.1.1-1.22 [ 191s] [102/102] installing util-linux-su-2.39.3-1.18 [ 191s] now finalizing build dir... [ 193s] ----------------------------------------------------------------- [ 193s] I have the following modifications for attr.spec: [ 193s] 7c7 [ 193s] < Release: 0 [ 193s] --- [ 193s] > Release: 1.24 [ 193s] build target is armv7l-tizen-linux [ 193s] ----------------------------------------------------------------- [ 193s] ----- building attr.spec (user abuild) [ 193s] ----------------------------------------------------------------- [ 193s] ----------------------------------------------------------------- [ 194s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=armv7l-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X-ASAN/standard/f69b999b2a3a866dcb8cbe129b4766ac-attr' /home/abuild/rpmbuild/SOURCES/attr.spec [ 194s] Building target platforms: armv7l-tizen-linux [ 194s] Building for target armv7l-tizen-linux [ 194s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.BacBVv [ 194s] + umask 022 [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + rm -rf attr-2.5.1 [ 194s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/attr-2.5.1.src.tar.gz [ 194s] + /bin/tar -xof - [ 194s] + STATUS=0 [ 194s] + '[' 0 -ne 0 ']' [ 194s] + cd attr-2.5.1 [ 194s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 194s] + cp /home/abuild/rpmbuild/SOURCES/attr.manifest . [ 194s] + exit 0 [ 194s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.hbZyk2 [ 194s] + umask 022 [ 194s] + cd /home/abuild/rpmbuild/BUILD [ 194s] + cd attr-2.5.1 [ 194s] + ref=/usr/lib/rpm [ 194s] + mints=0 [ 194s] + case $(uname -m) in [ 194s] ++ uname -m [ 194s] + for s in guess sub [ 194s] ++ find -maxdepth 8 -name config.guess [ 194s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 194s] + grep -q config-patches@ ./build-aux/config.guess [ 194s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build-aux/config.guess [ 194s] ++ tr -d $'\r' [ 194s] + timestamp=20180308 [ 194s] + test -n 20180308 [ 194s] + test 20180308 -ge 0 [ 194s] + for s in guess sub [ 194s] ++ find -maxdepth 8 -name config.sub [ 194s] + for c in '$(find -maxdepth 8 -name "config.$s")' [ 194s] + grep -q config-patches@ ./build-aux/config.sub [ 194s] ++ sed -n '/^timestamp=/{s///;s/[-'\''"]//g;p;q;}' ./build-aux/config.sub [ 194s] ++ tr -d $'\r' [ 194s] + timestamp=20180505 [ 195s] + test -n 20180505 [ 195s] + test 20180505 -ge 0 [ 195s] + LANG=C [ 195s] + export LANG [ 195s] + unset DISPLAY [ 195s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 195s] + export CFLAGS [ 195s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 195s] + export CXXFLAGS [ 195s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 195s] + export FFLAGS [ 195s] + LDFLAGS= [ 195s] + export LDFLAGS [ 195s] + export 'OPTIMIZER=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 195s] + OPTIMIZER='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 195s] + export DEBUG=-DNDEBUG [ 195s] + DEBUG=-DNDEBUG [ 195s] + export 'CFLAGS=-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC' [ 195s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC' [ 195s] + export 'LDFLAGS= -Wl,-z,relro -pie' [ 195s] + LDFLAGS=' -Wl,-z,relro -pie' [ 195s] + AR=gcc-ar [ 195s] + export AR [ 195s] + NM=/bin/nm [ 195s] + export NM [ 195s] + RANLIB=gcc-ranlib [ 195s] + export RANLIB [ 195s] + CFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -fPIC' [ 195s] + export CFLAGS [ 195s] + CXXFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g' [ 195s] + export CXXFLAGS [ 195s] + FFLAGS='-O2 -fno-inline-functions -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed --param=ssp-buffer-size=4 -march=armv7-a -mtune=cortex-a8 -mlittle-endian -mfpu=neon -mfloat-abi=softfp -mthumb -Wp,-D__SOFTFP__ -Wl,-O1 -Wl,--hash-style=gnu -Wa,-mimplicit-it=thumb -D_FILE_OFFSET_BITS=64 -g -I%_fmoddir' [ 195s] + export FFLAGS [ 195s] + ./configure --build=armv7l-tizen-linux-gnueabi --host=armv7l-tizen-linux-gnueabi --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --prefix=/usr --enable-gettext=no --exec-prefix=/ --sbindir=/usr/sbin --libdir=/usr/lib --libexecdir=/usr/lib --with-pic --enable-static=no [ 196s] configure: WARNING: unrecognized options: --enable-gettext [ 197s] checking for a BSD-compatible install... /bin/install -c [ 197s] checking whether build environment is sane... yes [ 197s] checking for a thread-safe mkdir -p... /bin/mkdir -p [ 197s] checking for gawk... gawk [ 197s] checking whether make sets $(MAKE)... yes [ 197s] checking whether make supports nested variables... yes [ 197s] checking whether make supports nested variables... (cached) yes [ 197s] checking for armv7l-tizen-linux-gnueabi-gcc... armv7l-tizen-linux-gnueabi-gcc [ 198s] checking whether the C compiler works... yes [ 198s] checking for C compiler default output file name... a.out [ 198s] checking for suffix of executables... [ 198s] checking whether we are cross compiling... no [ 198s] checking for suffix of object files... o [ 199s] checking whether we are using the GNU C compiler... yes [ 199s] checking whether armv7l-tizen-linux-gnueabi-gcc accepts -g... yes [ 199s] checking for armv7l-tizen-linux-gnueabi-gcc option to accept ISO C89... none needed [ 199s] checking whether armv7l-tizen-linux-gnueabi-gcc understands -c and -o together... yes [ 199s] checking whether make supports the include directive... yes (GNU style) [ 199s] checking dependency style of armv7l-tizen-linux-gnueabi-gcc... gcc3 [ 200s] checking how to run the C preprocessor... armv7l-tizen-linux-gnueabi-gcc -E [ 200s] checking for grep that handles long lines and -e... /bin/grep [ 200s] checking for egrep... /bin/grep -E [ 201s] checking for ANSI C header files... yes [ 201s] checking for sys/types.h... yes [ 201s] checking for sys/stat.h... yes [ 201s] checking for stdlib.h... yes [ 201s] checking for string.h... yes [ 202s] checking for memory.h... yes [ 202s] checking for strings.h... yes [ 202s] checking for inttypes.h... yes [ 202s] checking for stdint.h... yes [ 203s] checking for unistd.h... yes [ 203s] checking minix/config.h usability... no [ 203s] checking minix/config.h presence... no [ 203s] checking for minix/config.h... no [ 203s] checking whether it is safe to define __EXTENSIONS__... yes [ 203s] checking for an ANSI C-conforming const... yes [ 204s] checking for mode_t... yes [ 204s] checking for size_t... yes [ 204s] checking for working alloca.h... yes [ 205s] checking for alloca... yes [ 205s] checking whether __attribute__((visibility())) is supported... yes [ 205s] checking for special C compiler options needed for large files... no [ 205s] checking for _FILE_OFFSET_BITS value needed for large files... no [ 205s] checking for armv7l-tizen-linux-gnueabi-ar... gcc-ar [ 205s] checking the archiver (gcc-ar) interface... ar [ 205s] checking build system type... armv7l-tizen-linux-gnueabi [ 205s] checking host system type... armv7l-tizen-linux-gnueabi [ 205s] checking how to print strings... printf [ 205s] checking for a sed that does not truncate output... /bin/sed [ 205s] checking for fgrep... /bin/grep -F [ 205s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 205s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 205s] checking for BSD- or MS-compatible name lister (nm)... /bin/nm [ 206s] checking the name lister (/bin/nm) interface... BSD nm [ 206s] checking whether ln -s works... yes [ 206s] checking the maximum length of command line arguments... 1572864 [ 206s] checking how to convert armv7l-tizen-linux-gnueabi file names to armv7l-tizen-linux-gnueabi format... func_convert_file_noop [ 206s] checking how to convert armv7l-tizen-linux-gnueabi file names to toolchain format... func_convert_file_noop [ 206s] checking for /usr/armv7l-tizen-linux-gnueabi/bin/ld option to reload object files... -r [ 206s] checking for armv7l-tizen-linux-gnueabi-objdump... no [ 206s] checking for objdump... objdump [ 206s] checking how to recognize dependent libraries... pass_all [ 206s] checking for armv7l-tizen-linux-gnueabi-dlltool... no [ 206s] checking for dlltool... no [ 206s] checking how to associate runtime and link libraries... printf %s\n [ 206s] checking for armv7l-tizen-linux-gnueabi-ar... (cached) gcc-ar [ 206s] checking for archiver @FILE support... @ [ 206s] checking for armv7l-tizen-linux-gnueabi-strip... no [ 206s] checking for strip... strip [ 206s] checking for armv7l-tizen-linux-gnueabi-ranlib... gcc-ranlib [ 207s] checking command to parse /bin/nm output from armv7l-tizen-linux-gnueabi-gcc object... ok [ 207s] checking for sysroot... no [ 207s] checking for a working dd... /bin/dd [ 207s] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 [ 207s] checking for armv7l-tizen-linux-gnueabi-mt... no [ 207s] checking for mt... no [ 207s] checking if : is a manifest tool... no [ 207s] checking for dlfcn.h... yes [ 207s] checking for objdir... .libs [ 208s] checking if armv7l-tizen-linux-gnueabi-gcc supports -fno-rtti -fno-exceptions... no [ 208s] checking for armv7l-tizen-linux-gnueabi-gcc option to produce PIC... -fPIC -DPIC [ 208s] checking if armv7l-tizen-linux-gnueabi-gcc PIC flag -fPIC -DPIC works... yes [ 208s] checking if armv7l-tizen-linux-gnueabi-gcc static flag -static works... no [ 208s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... yes [ 208s] checking if armv7l-tizen-linux-gnueabi-gcc supports -c -o file.o... (cached) yes [ 209s] checking whether the armv7l-tizen-linux-gnueabi-gcc linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) supports shared libraries... yes [ 209s] checking whether -lc should be explicitly linked in... no [ 210s] checking dynamic linker characteristics... GNU/Linux ld.so [ 210s] checking how to hardcode library paths into programs... immediate [ 210s] checking whether stripping libraries is possible... yes [ 210s] checking if libtool supports shared libraries... yes [ 210s] checking whether to build shared libraries... yes [ 210s] checking whether to build static libraries... no [ 210s] checking whether NLS is requested... yes [ 210s] checking for msgfmt... no [ 210s] checking for gmsgfmt... : [ 210s] checking for xgettext... no [ 210s] checking for msgmerge... no [ 210s] checking for ld used by armv7l-tizen-linux-gnueabi-gcc... /usr/armv7l-tizen-linux-gnueabi/bin/ld [ 210s] checking if the linker (/usr/armv7l-tizen-linux-gnueabi/bin/ld) is GNU ld... yes [ 210s] checking for shared library run path origin... done [ 211s] checking for CFPreferencesCopyAppValue... no [ 211s] checking for CFLocaleCopyCurrent... no [ 211s] checking for GNU gettext in libc... yes [ 211s] checking whether to use NLS... yes [ 211s] checking where the gettext function comes from... libc [ 211s] checking that generated files are newer than configure... done [ 211s] configure: creating ./config.status [ 215s] config.status: creating libattr.pc [ 215s] config.status: creating Makefile [ 216s] config.status: creating po/Makefile.in [ 216s] config.status: creating include/config.h [ 217s] config.status: executing depfiles commands [ 218s] config.status: executing libtool commands [ 218s] config.status: executing po-directories commands [ 218s] config.status: creating po/POTFILES [ 218s] config.status: creating po/Makefile [ 218s] config.status: executing include/attr commands [ 218s] configure: WARNING: unrecognized options: --enable-gettext [ 219s] + /bin/make -j12 [ 219s] Making all in po [ 219s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 219s] make[1]: Nothing to be done for 'all'. [ 219s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 219s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 219s] CC tools/getfattr.o [ 219s] CC tools/attr.o [ 219s] CC tools/setfattr.o [ 219s] CC libattr/la-attr_copy_check.lo [ 219s] CC libattr/la-attr_copy_fd.lo [ 219s] CC libattr/la-attr_copy_action.lo [ 219s] CC libattr/la-attr_copy_file.lo [ 219s] CC libattr/la-libattr.lo [ 219s] CC libattr/la-syscalls.lo [ 219s] CC libmisc/high_water_alloc.lo [ 219s] CC libmisc/next_line.lo [ 219s] CC libmisc/quote.lo [ 219s] CC libmisc/unquote.lo [ 219s] CC libmisc/walk_tree.lo [ 220s] libattr/attr_copy_file.c: In function 'attr_copy_file': [ 220s] libattr/attr_copy_file.c:126:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 220s] 126 | size = lgetxattr (src_path, name, value, size); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] In file included from libattr/attr_copy_file.c:25: [ 220s] /usr/include/sys/xattr.h:67:16: note: in a call to function 'lgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 220s] 67 | extern ssize_t lgetxattr (const char *__path, const char *__name, [ 220s] | ^~~~~~~~~ [ 220s] libattr/attr_copy_file.c:126:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 220s] 126 | size = lgetxattr (src_path, name, value, size); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] /usr/include/sys/xattr.h:67:16: note: in a call to function 'lgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 220s] 67 | extern ssize_t lgetxattr (const char *__path, const char *__name, [ 220s] | ^~~~~~~~~ [ 220s] libattr/attr_copy_fd.c: In function 'attr_copy_fd': [ 220s] libattr/attr_copy_fd.c:128:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 220s] 128 | size = fgetxattr (src_fd, name, value, size); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] In file included from libattr/attr_copy_fd.c:25: [ 220s] /usr/include/sys/xattr.h:73:16: note: in a call to function 'fgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 220s] 73 | extern ssize_t fgetxattr (int __fd, const char *__name, void *__value, [ 220s] | ^~~~~~~~~ [ 220s] libattr/attr_copy_fd.c:128:24: warning: argument 3 is null but the corresponding size argument 4 value is [1, 2147483647] [-Wnonnull] [ 220s] 128 | size = fgetxattr (src_fd, name, value, size); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] /usr/include/sys/xattr.h:73:16: note: in a call to function 'fgetxattr' declared with attribute 'access (write_only, 3, 4)' [ 220s] 73 | extern ssize_t fgetxattr (int __fd, const char *__name, void *__value, [ 220s] | ^~~~~~~~~ [ 220s] In function 'attr_list_pack', [ 220s] inlined from 'attr_list' at libattr/libattr.c:325:7: [ 220s] libattr/libattr.c:279:9: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] [ 220s] 279 | strncpy(aentp->a_name, name, size - sizeof(aentp->a_valuelen)); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] libattr/libattr.c:269:28: note: length computed here [ 220s] 269 | int size = roundup(strlen(name) + 1 + sizeof(aentp->a_valuelen), 8); [ 220s] | ^~~~~~~~~~~~ [ 220s] libattr/libattr.c:40:26: note: in definition of macro 'roundup' [ 220s] 40 | #define roundup(x,y) ((((x)+((y)-1))/(y))*(y)) [ 220s] | ^ [ 220s] In function 'attr_list_pack', [ 220s] inlined from 'attr_listf' at libattr/libattr.c:370:7: [ 220s] libattr/libattr.c:279:9: warning: 'strncpy' specified bound depends on the length of the source argument [-Wstringop-truncation] [ 220s] 279 | strncpy(aentp->a_name, name, size - sizeof(aentp->a_valuelen)); [ 220s] | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [ 220s] libattr/libattr.c:269:28: note: length computed here [ 220s] 269 | int size = roundup(strlen(name) + 1 + sizeof(aentp->a_valuelen), 8); [ 220s] | ^~~~~~~~~~~~ [ 220s] libattr/libattr.c:40:26: note: in definition of macro 'roundup' [ 220s] 40 | #define roundup(x,y) ((((x)+((y)-1))/(y))*(y)) [ 220s] | ^ [ 220s] CCLD libattr.la [ 221s] CCLD libmisc.la [ 222s] CCLD attr [ 222s] CCLD setfattr [ 222s] CCLD getfattr [ 223s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 223s] + exit 0 [ 223s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.e54L4v [ 223s] + umask 022 [ 223s] + cd /home/abuild/rpmbuild/BUILD [ 223s] + cd attr-2.5.1 [ 223s] + LANG=C [ 223s] + export LANG [ 223s] + unset DISPLAY [ 223s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm [ 223s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm [ 223s] + /bin/make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm INSTALL_ROOT=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm install [ 223s] Making install in po [ 223s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 223s] installing cs.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/cs/LC_MESSAGES/attr.mo [ 224s] installing de.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/de/LC_MESSAGES/attr.mo [ 224s] installing es.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/es/LC_MESSAGES/attr.mo [ 224s] installing fr.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/fr/LC_MESSAGES/attr.mo [ 224s] installing gl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/gl/LC_MESSAGES/attr.mo [ 225s] installing nl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/nl/LC_MESSAGES/attr.mo [ 225s] installing pl.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/pl/LC_MESSAGES/attr.mo [ 225s] installing sv.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/sv/LC_MESSAGES/attr.mo [ 226s] installing en@boldquot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/en@boldquot/LC_MESSAGES/attr.mo [ 226s] installing en@quot.gmo as /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/locale/en@quot/LC_MESSAGES/attr.mo [ 226s] if test "attr" = "gettext-tools"; then \ [ 226s] /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/gettext/po; \ [ 226s] for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot Makevars.template; do \ [ 226s] /bin/install -c -m 644 ./$file \ [ 226s] /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/gettext/po/$file; \ [ 226s] done; \ [ 226s] for file in Makevars; do \ [ 226s] rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/gettext/po/$file; \ [ 226s] done; \ [ 226s] else \ [ 226s] : ; \ [ 226s] fi [ 226s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1/po' [ 226s] make[1]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 226s] make[2]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 226s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib' [ 226s] /bin/sh ./libtool --mode=install /bin/install -c libattr.la '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib' [ 226s] libtool: install: /bin/install -c .libs/libattr.so.1.1.2501 /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib/libattr.so.1.1.2501 [ 226s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so.1 || { rm -f libattr.so.1 && ln -s libattr.so.1.1.2501 libattr.so.1; }; }) [ 227s] libtool: install: (cd /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib && { ln -s -f libattr.so.1.1.2501 libattr.so || { rm -f libattr.so && ln -s libattr.so.1.1.2501 libattr.so; }; }) [ 227s] libtool: install: /bin/install -c .libs/libattr.lai /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib/libattr.la [ 227s] libtool: warning: remember to run 'libtool --finish /usr/lib' [ 227s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin' [ 227s] /bin/sh ./libtool --mode=install /bin/install -c attr getfattr setfattr '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin' [ 227s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 227s] libtool: install: /bin/install -c .libs/attr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/attr [ 228s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 228s] libtool: install: /bin/install -c .libs/getfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/getfattr [ 228s] libtool: warning: 'libattr.la' has not been installed in '/usr/lib' [ 228s] libtool: install: /bin/install -c .libs/setfattr /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/setfattr [ 228s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/etc' [ 228s] /bin/install -c -m 644 xattr.conf '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/etc' [ 228s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/attributes.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/include/attr" [ 229s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/error_context.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/include/attr" [ 229s] subst_install_header() { file=`echo "$1" | sed -e 's,^.*/,,'`; /bin/sed -e "s/\/extern/" < "$1" > "include/$file.t" || exit 1; /bin/mkdir -p "$2" || exit 1; /bin/install -c -m 644 "include/$file.t" "$2/$file" || exit 1; rm -f "include/$file.t"; }; subst_install_header "include/libattr.h" "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/include/attr" [ 229s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc/attr' [ 229s] /bin/install -c -m 644 doc/CHANGES doc/COPYING doc/COPYING.LGPL doc/PORTING '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc/attr' [ 230s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man/man1' [ 230s] /bin/install -c -m 644 man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man/man1' [ 230s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man/man3' [ 230s] /bin/install -c -m 644 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3 '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man/man3' [ 230s] /bin/mkdir -p '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib/pkgconfig' [ 230s] /bin/install -c -m 644 libattr.pc '/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib/pkgconfig' [ 230s] /bin/make install-data-hook [ 230s] make[3]: Entering directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 230s] set -e; \ [ 230s] cd "/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man"; \ [ 230s] for d in man/man1/attr.1 man/man1/getfattr.1 man/man1/setfattr.1 man/man3/attr_get.3 man/man3/attr_list.3 man/man3/attr_multi.3 man/man3/attr_remove.3 man/man3/attr_set.3; do \ [ 230s] man_section=${d##*.}; \ [ 230s] d=${d#man/}; \ [ 230s] dst=${d##*/}; \ [ 230s] for m in `gawk \ [ 230s] '/^\.S[h|H] NAME/ {ok=1; next} ok {print; exit}' $d \ [ 230s] | /bin/sed \ [ 230s] -e 's/^\.Nm //' -e 's/,/ /g' -e 's/\\-.*//' \ [ 230s] -e 's/\\\f[0-9]//g' -e 's/ / /g;q'`; \ [ 230s] do \ [ 230s] [ "$m" = "\\" ] && continue; \ [ 230s] ln="man$man_section/$m.$man_section"; \ [ 230s] [ -e "$ln" ] && continue; \ [ 230s] echo ln -s $dst $ln; \ [ 230s] ln -s $dst $ln; \ [ 230s] done; \ [ 230s] done [ 230s] ln -s attr_get.3 man3/attr_getf.3 [ 230s] ln -s attr_list.3 man3/attr_listf.3 [ 231s] ln -s attr_multi.3 man3/attr_multif.3 [ 231s] ln -s attr_remove.3 man3/attr_removef.3 [ 231s] ln -s attr_set.3 man3/attr_setf.3 [ 231s] make[3]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 231s] make[2]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 231s] make[1]: Leaving directory '/home/abuild/rpmbuild/BUILD/attr-2.5.1' [ 231s] + rm -f /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/info/dir [ 231s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -regex '.*\.la$' [ 231s] + xargs rm -f -- [ 231s] + xargs rm -f -- [ 231s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -regex '.*\.a$' [ 231s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -type f -name '*.la' -delete -print [ 231s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm//usr/share/doc/attr [ 231s] + /usr/lib/rpm/find-lang.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm attr [ 233s] find: `/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/help/': No such file or directory [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/info [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc/packages [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc/attr [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc/attr-2.5.1 [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/gtk-doc [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/doc [ 233s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/man [ 233s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -regex '.*/man/man./.*.[0-9]' [ 233s] + xargs rm -f -- [ 234s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -regex '.*/man/../man./.*.[0-9]' [ 234s] + xargs rm -f -- [ 234s] + find /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm -regex '.*/man/man./.*.[0-9]pm' [ 234s] + xargs rm -f -- [ 234s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 2.5.1-1.24 --unique-debug-src-base attr-2.5.1-1.24.arm -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/attr-2.5.1 [ 236s] 1+0 records in [ 236s] 1+0 records out [ 236s] 1+0 records in [ 236s] 1+0 records out [ 236s] 1+0 records in [ 236s] 1+0 records out [ 236s] 1+0 records in [ 236s] 1+0 records out [ 236s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/attr [ 236s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/setfattr [ 236s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/bin/getfattr [ 236s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/lib/libattr.so.1.1.2501 [ 237s] 0+0 records in [ 237s] 0+0 records out [ 237s] 0+0 records in [ 237s] 0+0 records out [ 237s] 0+0 records in [ 237s] 0+0 records out [ 237s] 0+0 records in [ 237s] 0+0 records out [ 237s] 164 blocks [ 237s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debuginfo.manifest [ 238s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/attr-2.5.1/attr-debugsource.manifest [ 238s] + /usr/lib/rpm/check-buildroot [ 238s] + /usr/lib/rpm//brp-compress [ 238s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 239s] + /usr/lib/rpm/brp-python-hardlink [ 239s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm [ 239s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/attr-2.5.1/isu.list [ 239s] ~/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm ~/rpmbuild/BUILD/attr-2.5.1 [ 239s] ~/rpmbuild/BUILD/attr-2.5.1 [ 239s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh /home/abuild/rpmbuild/SOURCES [ 241s] Processing files: attr-2.5.1-1.24.armv7l [ 241s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 241s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 241s] [ 241s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.W3bG8p [ 241s] + umask 022 [ 241s] + cd /home/abuild/rpmbuild/BUILD [ 241s] + cd attr-2.5.1 [ 241s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/attr [ 241s] + export LC_ALL=C [ 241s] + LC_ALL=C [ 241s] + export LICENSEDIR [ 241s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/attr [ 241s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/attr [ 241s] + exit 0 [ 241s] Provides: attr = 2.5.1-1.24 attr(armv7l-32) = 2.5.1-1.24 [ 241s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 241s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libasan.so.8 libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.2) libc.so.6 libc.so.6(GLIBC_2.34) libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 241s] Processing files: attr-debugsource-2.5.1-1.24.armv7l [ 241s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 241s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 241s] [ 242s] Provides: attr-debugsource = 2.5.1-1.24 attr-debugsource(armv7l-32) = 2.5.1-1.24 [ 242s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 242s] Processing files: libattr-2.5.1-1.24.armv7l [ 242s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 242s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 242s] [ 242s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.Y1VboA [ 242s] + umask 022 [ 242s] + cd /home/abuild/rpmbuild/BUILD [ 242s] + cd attr-2.5.1 [ 242s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr [ 242s] + export LC_ALL=C [ 242s] + LC_ALL=C [ 242s] + export LICENSEDIR [ 242s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr [ 242s] + cp -pr doc/COPYING.LGPL /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr [ 242s] + exit 0 [ 242s] Provides: config(libattr) = 2.5.1-1.24 libattr = 2.5.1-1.24 libattr(armv7l-32) = 2.5.1-1.24 libattr.so.1 libattr.so.1(ATTR_1.0) libattr.so.1(ATTR_1.1) libattr.so.1(ATTR_1.2) libattr.so.1(ATTR_1.3) [ 242s] Requires(interp): /sbin/ldconfig /sbin/ldconfig [ 242s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 242s] Requires(post): /sbin/ldconfig [ 242s] Requires(postun): /sbin/ldconfig [ 242s] Requires: ld-linux.so.3 ld-linux.so.3(GLIBC_2.4) libasan.so.8 libc.so.6 libc.so.6(GLIBC_2.4) libgcc_s.so.1 libgcc_s.so.1(GCC_3.5) rtld(GNU_HASH) [ 242s] Processing files: libattr-devel-2.5.1-1.24.armv7l [ 242s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 242s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 242s] [ 242s] Executing(%license): /bin/sh -e /var/tmp/rpm-tmp.4wz7r5 [ 242s] + umask 022 [ 242s] + cd /home/abuild/rpmbuild/BUILD [ 242s] + cd attr-2.5.1 [ 242s] + LICENSEDIR=/home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr-devel [ 242s] + export LC_ALL=C [ 242s] + LC_ALL=C [ 242s] + export LICENSEDIR [ 242s] + /bin/mkdir -p /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr-devel [ 242s] + cp -pr doc/COPYING /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm/usr/share/licenses/libattr-devel [ 242s] + exit 0 [ 243s] Provides: attr-devel = 2.5.1 libattr-devel = 2.5.1-1.24 libattr-devel(armv7l-32) = 2.5.1-1.24 pkgconfig(libattr) = 2.5.1 [ 243s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 243s] Requires: /usr/bin/pkg-config libattr.so.1 [ 243s] Obsoletes: attr-devel <= 2.5.1 [ 243s] Processing files: attr-debuginfo-2.5.1-1.24.armv7l [ 243s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 243s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 243s] [ 243s] Provides: attr-debuginfo = 2.5.1-1.24 attr-debuginfo(armv7l-32) = 2.5.1-1.24 [ 243s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 243s] Recommends: attr-debugsource(armv7l-32) = 2.5.1-1.24 [ 243s] Processing files: libattr-debuginfo-2.5.1-1.24.armv7l [ 243s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 243s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 243s] [ 243s] Provides: libattr-debuginfo = 2.5.1-1.24 libattr-debuginfo(armv7l-32) = 2.5.1-1.24 [ 243s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 243s] Recommends: attr-debugsource(armv7l-32) = 2.5.1-1.24 [ 243s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm [ 244s] Wrote: /home/abuild/rpmbuild/SRPMS/attr-2.5.1-1.24.src.rpm [ 244s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-2.5.1-1.24.armv7l.rpm [ 244s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debugsource-2.5.1-1.24.armv7l.rpm [ 244s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-2.5.1-1.24.armv7l.rpm [ 244s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-devel-2.5.1-1.24.armv7l.rpm [ 245s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/attr-debuginfo-2.5.1-1.24.armv7l.rpm [ 245s] Wrote: /home/abuild/rpmbuild/RPMS/armv7l/libattr-debuginfo-2.5.1-1.24.armv7l.rpm [ 245s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.oFCSIJ [ 245s] + umask 022 [ 245s] + cd /home/abuild/rpmbuild/BUILD [ 245s] + cd attr-2.5.1 [ 245s] + /bin/rm -rf /home/abuild/rpmbuild/BUILDROOT/attr-2.5.1-1.24.arm [ 245s] + exit 0 [ 245s] ... checking for files with abuild user/group [ 245s] ... creating baselibs [ 248s] no targets for arch armv7l, nothing to do [ 248s] [ 248s] befb69554a05 finished "build attr.spec" at Wed Sep 24 14:09:15 UTC 2025. [ 248s]