[ 0s] on X86_64, no limit mem size [ 0s] Using BUILD_ROOT=/root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22 [ 0s] Using BUILD_ARCH=riscv64 [ 0s] [ 0s] [ 0s] 3986c8c1c30d started "build perl-PerlIO-gzip.spec" at Tue Dec 17 13:13:03 UTC 2024. [ 0s] [ 0s] Building perl-PerlIO-gzip for project 'Tizen-Base-X' repository 'standard' arch 'riscv64' srcmd5 '9a29617bd5b652591c26a8f086ebfab4' [ 0s] [ 0s] processing recipe /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/perl-PerlIO-gzip.spec ... [ 0s] running changelog2spec --target rpm --file /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/perl-PerlIO-gzip.spec [ 0s] init_buildsystem --configdir /root/gbsbuild-ROOT/NGBS-ROOT/run/worker/22/build/configs --cachedir /var/cache/build --clean --rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build.rpmlist /root/gbsbuild-ROOT/NGBS-ROOT/worker/scratch.22/.build-srcdir/perl-PerlIO-gzip.spec build ... [ 0s] registering binfmt handlers for cross build [ 1s] cycle: nss -> libsoftokn3 [ 1s] breaking dependency nss -> libsoftokn3 [ 1s] [1/42] preinstalling libmagic-data... [ 1s] [2/42] preinstalling libncurses... [ 1s] [3/42] preinstalling setup... [ 1s] [4/42] preinstalling filesystem... [ 1s] [5/42] preinstalling glibc... [ 1s] [6/42] preinstalling bash... [ 1s] [7/42] preinstalling diffutils... [ 1s] [8/42] preinstalling grep... [ 2s] [9/42] preinstalling libattr... [ 2s] [10/42] preinstalling libblkid... [ 2s] [11/42] preinstalling libbz2... [ 2s] [12/42] preinstalling libfreebl3... [ 2s] [13/42] preinstalling libgcc... [ 2s] [14/42] preinstalling liblua... [ 2s] [15/42] preinstalling liblzma... [ 2s] [16/42] preinstalling libpopt... [ 2s] [17/42] preinstalling libreadline... [ 2s] [18/42] preinstalling libsmack... [ 2s] [19/42] preinstalling libsqlite... [ 2s] [20/42] preinstalling libuuid... [ 2s] [21/42] preinstalling libxcrypt... [ 2s] [22/42] preinstalling libzstd1... [ 3s] [23/42] preinstalling nspr... [ 3s] [24/42] preinstalling sed... [ 3s] [25/42] preinstalling zlib... [ 3s] [26/42] preinstalling qemu-accel-x86_64-riscv64... [ 20s] [27/42] preinstalling qemu-linux-user-x86_64-cross... [ 25s] [28/42] preinstalling coreutils... [ 25s] [29/42] preinstalling libacl... [ 25s] [30/42] preinstalling libcap... [ 25s] [31/42] preinstalling libelf... [ 25s] [32/42] preinstalling libmount... [ 25s] [33/42] preinstalling smack... [ 25s] [34/42] preinstalling bzip2... [ 25s] [35/42] preinstalling libmagic... [ 26s] [36/42] preinstalling libxml2... [ 26s] [37/42] preinstalling tar... [ 26s] [38/42] preinstalling util-linux... [ 26s] [39/42] preinstalling util-linux-su... [ 26s] [40/42] preinstalling nss... [ 26s] [41/42] preinstalling libsoftokn3... [ 26s] [42/42] preinstalling rpm... [ 26s] running qemu-linux-user-x86_64-cross postinstall script [ 27s] running qemu-accel-x86_64-riscv64 postinstall script [ 27s] mv: cannot stat `/usr/lib64/gcc/riscv64-tizen-linux-gnu/14.2.0/liblto_plugin.so': No such file or directory [ 27s] running setup postinstall script [ 27s] chroot: failed to run command '': No such file or directory [ 27s] initializing rpm db... [ 27s] reordering...cycle: libxcrypt-devel -> glibc-devel [ 27s] breaking dependency libxcrypt-devel -> glibc-devel [ 27s] cycle: libsoftokn3 -> nss [ 27s] breaking dependency nss -> libsoftokn3 [ 27s] done [ 27s] querying package ids... [ 28s] [1/99] cumulate libmagic-data-5.45-1.4 [ 28s] [2/99] cumulate setup-0.9-1.1 [ 28s] [3/99] cumulate filesystem-3.1-1.1 [ 28s] [4/99] cumulate glibc-2.39-1.6 [ 28s] [5/99] cumulate bash-3.2.57-1.1 [ 28s] [6/99] cumulate cpio-2.8-1.1 [ 28s] [7/99] cumulate diffutils-3.10-1.1 [ 28s] [8/99] cumulate findutils-4.3.8-1.5 [ 28s] [9/99] cumulate gdbm-1.8.3-1.6 [ 28s] [10/99] cumulate hostname-3.23-1.1 [ 28s] [11/99] cumulate libatomic-14.2.0-1.6 [ 28s] [12/99] cumulate libattr-2.5.1-1.5 [ 28s] [13/99] cumulate libblkid-2.39.3-1.4 [ 28s] [14/99] cumulate libbz2-1.0.8-1.5 [ 28s] [15/99] cumulate libfreebl3-3.98-1.6 [ 28s] [16/99] cumulate libgcc-14.2.0-1.6 [ 28s] [17/99] cumulate libgomp-14.2.0-1.6 [ 28s] [18/99] cumulate libitm-14.2.0-1.6 [ 28s] [19/99] cumulate libltdl-2.4.7-1.6 [ 28s] [20/99] cumulate liblua-5.1.5-1.4 [ 28s] [21/99] cumulate liblzma-5.4.5-1.6 [ 28s] [22/99] cumulate libopenssl3-3.0.13-1.6 [ 28s] [23/99] cumulate libpcre-8.45-1.5 [ 28s] [24/99] cumulate libpopt-1.16-1.4 [ 28s] [25/99] cumulate libsmack-1.3.1-1.4 [ 28s] [26/99] cumulate libsmartcols-2.39.3-1.4 [ 28s] [27/99] cumulate libsqlite-3.44.0-1.5 [ 28s] [28/99] cumulate libuuid-2.39.3-1.4 [ 28s] [29/99] cumulate libxcrypt-4.4.36-1.5 [ 28s] [30/99] cumulate libzstd1-1.5.5-1.5 [ 28s] [31/99] cumulate m4-1.4.19-1.1 [ 28s] [32/99] cumulate net-tools-2.0_20121208git-1.3 [ 28s] [33/99] cumulate nspr-4.35-1.5 [ 28s] [34/99] cumulate patch-2.7.6-1.4 [ 28s] [35/99] cumulate pkg-config-0.29.2-1.5 [ 28s] [36/99] cumulate sed-4.1c-1.5 [ 28s] [37/99] cumulate update-alternatives-1.22.2-1.1 [ 28s] [38/99] cumulate which-2.17-1.1 [ 28s] [39/99] cumulate zlib-1.3-1.5 [ 28s] [40/99] cumulate build-compare-2023.06.18-1.1 [ 28s] [41/99] cumulate hal-rootstrap-checker-0.1.0-1.1 [ 28s] [42/99] cumulate qemu-linux-user-x86_64-cross-5.2.0.2-20.1 [ 28s] [43/99] cumulate binutils-libs-2.43-1.6 [ 28s] [44/99] cumulate coreutils-6.9-14.1 [ 28s] [45/99] cumulate cpp-14.2.0-1.6 [ 28s] [46/99] cumulate gawk-3.1.5-1.1 [ 28s] [47/99] cumulate gcc-c++-14.2.0-1.6 [ 28s] [48/99] cumulate grep-2.5.2-1.4 [ 28s] [49/99] cumulate libacl-2.3.2-1.5 [ 28s] [50/99] cumulate libcap-2.69-1.5 [ 28s] [51/99] cumulate libelf-0.189-1.6 [ 28s] [52/99] cumulate libgfortran-14.2.0-1.6 [ 28s] [53/99] cumulate libmount-2.39.3-1.4 [ 28s] [54/99] cumulate libstdc++-14.2.0-1.6 [ 28s] [55/99] cumulate make-4.4-1.5 [ 28s] [56/99] cumulate nss-certs-3.98-1.6 [ 28s] [57/99] cumulate smack-1.3.1-1.4 [ 28s] [58/99] cumulate bzip2-1.0.8-1.5 [ 28s] [59/99] cumulate libfdisk-2.39.3-1.4 [ 28s] [60/99] cumulate libmagic-5.45-1.4 [ 28s] [61/99] cumulate libxml2-2.12.5-1.5 [ 28s] [62/99] cumulate xz-5.4.5-1.6 [ 28s] [63/99] cumulate perl-5.38.0-1.5 [ 28s] [64/99] cumulate build-mkbaselibs-20120927-1.1 [ 28s] [65/99] cumulate libstdc++-devel-14.2.0-1.6 [ 28s] [66/99] cumulate linux-glibc-devel-6.6-1.5 [ 28s] [67/99] cumulate binutils-2.43-1.6 [ 28s] [68/99] cumulate file-5.45-1.4 [ 28s] [69/99] cumulate tar-1.17-1.1 [ 28s] [70/99] cumulate terminfo-base-full-6.4-1.6 [ 28s] [71/99] cumulate autoconf-2.71-1.5 [ 28s] [72/99] cumulate glibc-locale-2.39-1.6 [ 28s] [73/99] cumulate gzip-1.3.12-1.4 [ 28s] [74/99] cumulate libcc1-14.2.0-1.6 [ 28s] [75/99] cumulate libubsan-14.2.0-1.6 [ 28s] [76/99] cumulate pam-1.1.6-1.5 [ 28s] [77/99] cumulate tzdata-2023c-1.1 [ 28s] [78/99] cumulate libdw-0.189-1.6 [ 28s] [79/99] cumulate libarchive-3.7.2-1.5 [ 28s] [80/99] cumulate automake-1.16.5-1.5 [ 28s] [81/99] cumulate libasm-0.189-1.6 [ 28s] [82/99] cumulate libncurses6-6.4-1.6 [ 28s] [83/99] cumulate build-20120927-1.1 [ 28s] [84/99] cumulate gcc-14.2.0-1.6 [ 28s] [85/99] cumulate libncurses-6.4-1.6 [ 28s] [86/99] cumulate less-643-1.1 [ 28s] [87/99] cumulate libreadline-5.2-1.5 [ 28s] [88/99] cumulate qemu-accel-x86_64-riscv64-0.4-1.1 [ 28s] [89/99] cumulate libtool-2.4.7-1.6 [ 28s] [90/99] cumulate elfutils-0.189-1.6 [ 28s] [91/99] cumulate util-linux-2.39.3-1.4 [ 28s] [92/99] cumulate util-linux-su-2.39.3-1.4 [ 28s] [93/99] cumulate libxcrypt-devel-4.4.36-1.5 [ 28s] [94/99] cumulate nss-3.98-1.6 [ 28s] [95/99] cumulate glibc-devel-2.39-1.6 [ 28s] [96/99] cumulate libsoftokn3-3.98-1.6 [ 28s] [97/99] cumulate rpm-4.14.1.1-1.6 [ 28s] [98/99] cumulate zlib-devel-1.3-1.5 [ 28s] [99/99] cumulate rpm-build-4.14.1.1-1.6 [ 28s] now installing cumulated packages [ 41s] Preparing... ######################################## [ 41s] Updating / installing... [ 41s] setup-0.9-1.1 ######################################## [ 41s] filesystem-3.1-1.1 ######################################## [ 42s] glibc-2.39-1.6 ######################################## [ 43s] bash-3.2.57-1.1 ######################################## [ 43s] zlib-1.3-1.5 ######################################## [ 44s] coreutils-6.9-14.1 ######################################## [ 44s] libgcc-14.2.0-1.6 ######################################## [ 45s] libstdc++-14.2.0-1.6 ######################################## [ 45s] libbz2-1.0.8-1.5 ######################################## [ 45s] liblzma-5.4.5-1.6 ######################################## [ 46s] libelf-0.189-1.6 ######################################## [ 46s] libdw-0.189-1.6 ######################################## [ 46s] libxcrypt-4.4.36-1.5 ######################################## [ 46s] libblkid-2.39.3-1.4 ######################################## [ 46s] nspr-4.35-1.5 ######################################## [ 47s] pam-1.1.6-1.5 ######################################## [ 47s] libcap-2.69-1.5 ######################################## [ 47s] libfreebl3-3.98-1.6 ######################################## [ 48s] liblua-5.1.5-1.4 ######################################## [ 48s] libpopt-1.16-1.4 ######################################## [ 48s] libuuid-2.39.3-1.4 ######################################## [ 48s] libzstd1-1.5.5-1.5 ######################################## [ 49s] pkg-config-0.29.2-1.5 ######################################## [ 49s] libfdisk-2.39.3-1.4 ######################################## [ 49s] nss-certs-3.98-1.6 ######################################## [ 49s] libmount-2.39.3-1.4 ######################################## [ 49s] libasm-0.189-1.6 ######################################## [ 49s] libxml2-2.12.5-1.5 ######################################## [ 50s] xz-5.4.5-1.6 ######################################## [ 50s] bzip2-1.0.8-1.5 ######################################## [ 50s] libcc1-14.2.0-1.6 ######################################## [ 50s] libubsan-14.2.0-1.6 ######################################## [ 51s] libgfortran-14.2.0-1.6 ######################################## [ 51s] linux-glibc-devel-6.6-1.5 ######################################## [ 51s] terminfo-base-full-6.4-1.6 ######################################## [ 51s] libncurses6-6.4-1.6 ######################################## [ 52s] libreadline-5.2-1.5 ######################################## [ 52s] gzip-1.3.12-1.4 ######################################## [ 52s] binutils-libs-2.43-1.6 ######################################## [ 53s] binutils-2.43-1.6 ######################################## [ 54s] make-4.4-1.5 ######################################## [ 54s] findutils-4.3.8-1.5 ######################################## [ 54s] gdbm-1.8.3-1.6 ######################################## [ 59s] perl-5.38.0-1.5 ######################################## [ 60s] build-mkbaselibs-20120927-1.1 ######################################## [ 60s] libatomic-14.2.0-1.6 ######################################## [ 60s] libattr-2.5.1-1.5 ######################################## [ 61s] libacl-2.3.2-1.5 ######################################## [ 61s] tar-1.17-1.1 ######################################## [ 61s] libgomp-14.2.0-1.6 ######################################## [ 61s] libitm-14.2.0-1.6 ######################################## [ 68s] gcc-14.2.0-1.6 ######################################## [ 68s] libxcrypt-devel-4.4.36-1.5 ######################################## [ 68s] glibc-devel-2.39-1.6 ######################################## [ 68s] libltdl-2.4.7-1.6 ######################################## [ 69s] libopenssl3-3.0.13-1.6 ######################################## [ 69s] libarchive-3.7.2-1.5 ######################################## [ 69s] libpcre-8.45-1.5 ######################################## [ 70s] libsmack-1.3.1-1.4 ######################################## [ 70s] libsmartcols-2.39.3-1.4 ######################################## [ 70s] libsqlite-3.44.0-1.5 ######################################## [ 71s] libsoftokn3-3.98-1.6 ######################################## [ 71s] nss-3.98-1.6 ######################################## [ 72s] m4-1.4.19-1.1 ######################################## [ 72s] autoconf-2.71-1.5 ######################################## [ 72s] automake-1.16.5-1.5 ######################################## [ 72s] patch-2.7.6-1.4 ######################################## [ 72s] sed-4.1c-1.5 ######################################## [ 74s] util-linux-2.39.3-1.4 ######################################## [ 74s] libmagic-data-5.45-1.4 ######################################## [ 74s] libmagic-5.45-1.4 ######################################## [ 75s] rpm-4.14.1.1-1.6 ######################################## [ 76s] rpm-build-4.14.1.1-1.6 ######################################## [ 76s] file-5.45-1.4 ######################################## [ 76s] util-linux-su-2.39.3-1.4 ######################################## [ 76s] libtool-2.4.7-1.6 ######################################## [ 76s] smack-1.3.1-1.4 ######################################## [ 76s] grep-2.5.2-1.4 ######################################## [ 76s] zlib-devel-1.3-1.5 ######################################## [ 102s] qemu-accel-x86_64-riscv64-0.4-1.1 ######################################## [ 103s] build-20120927-1.1 ######################################## [ 103s] libncurses-6.4-1.6 ######################################## [ 103s] less-643-1.1 ######################################## [ 103s] elfutils-0.189-1.6 ######################################## [ 106s] libstdc++-devel-14.2.0-1.6 ######################################## [ 107s] glibc-locale-2.39-1.6 ######################################## [ 107s] tzdata-2023c-1.1 ######################################## [ 110s] cpp-14.2.0-1.6 ######################################## [ 114s] gcc-c++-14.2.0-1.6 ######################################## [ 114s] build-compare-2023.06.18-1.1 ######################################## [ 114s] hal-rootstrap-checker-0.1.0-1.1 ######################################## [ 123s] qemu-linux-user-x86_64-cross-5.2.0.2-2######################################## [ 124s] gawk-3.1.5-1.1 ######################################## [ 124s] cpio-2.8-1.1 ######################################## [ 124s] diffutils-3.10-1.1 ######################################## [ 124s] hostname-3.23-1.1 ######################################## [ 124s] net-tools-2.0_20121208git-1.3 ######################################## [ 124s] update-alternatives-1.22.2-1.1 ######################################## [ 124s] which-2.17-1.1 ######################################## [ 125s] now finalizing build dir... [ 126s] ----------------------------------------------------------------- [ 126s] I have the following modifications for perl-PerlIO-gzip.spec: [ 126s] 4c4 [ 126s] < Release: 1 [ 126s] --- [ 126s] > Release: 1.1 [ 126s] build target is riscv64-tizen-linux [ 126s] ----------------------------------------------------------------- [ 126s] ----- building perl-PerlIO-gzip.spec (user abuild) [ 126s] ----------------------------------------------------------------- [ 126s] ----------------------------------------------------------------- [ 127s] + exec rpmbuild -ba --define '_srcdefattr (-,root,root)' --nosignature --target=riscv64-tizen-linux --define '_build_create_debug 1' --define 'disturl obs://127.0.0.1/Tizen-Base-X/standard/9a29617bd5b652591c26a8f086ebfab4-perl-PerlIO-gzip' /home/abuild/rpmbuild/SOURCES/perl-PerlIO-gzip.spec [ 128s] Building target platforms: riscv64-tizen-linux [ 128s] Building for target riscv64-tizen-linux [ 128s] Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.sfT6LI [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + rm -rf perl-PerlIO-gzip-0.20 [ 128s] + /bin/gzip -dc /home/abuild/rpmbuild/SOURCES/lcov-0.20.tar.gz [ 128s] + /bin/tar -xof - [ 128s] + STATUS=0 [ 128s] + '[' 0 -ne 0 ']' [ 128s] + cd perl-PerlIO-gzip-0.20 [ 128s] + /bin/chmod -Rf a+rX,u+w,g-w,o-w . [ 128s] + exit 0 [ 128s] Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.U5n33J [ 128s] + umask 022 [ 128s] + cd /home/abuild/rpmbuild/BUILD [ 128s] + cd perl-PerlIO-gzip-0.20 [ 128s] + ref=/usr/lib/rpm [ 128s] + mints=0 [ 128s] + case $(uname -m) in [ 128s] ++ uname -m [ 128s] + mints=20160911 [ 128s] + for s in guess sub [ 128s] ++ find -maxdepth 8 -name config.guess [ 128s] + for s in guess sub [ 128s] ++ find -maxdepth 8 -name config.sub [ 128s] + LANG=C [ 128s] + export LANG [ 128s] + unset DISPLAY [ 128s] + CFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 128s] + export CFLAGS [ 128s] + CXXFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g' [ 128s] + export CXXFLAGS [ 128s] + FFLAGS='-O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -I%_fmoddir' [ 128s] + export FFLAGS [ 128s] + LDFLAGS= [ 128s] + export LDFLAGS [ 128s] + perl Makefile.PL [ 129s] Checking if your kit is complete... [ 129s] Looks good [ 129s] Generating a Unix-style Makefile [ 129s] Writing Makefile for PerlIO::gzip [ 129s] Writing MYMETA.yml and MYMETA.json [ 129s] + make [ 131s] cp gzip.pm blib/lib/PerlIO/gzip.pm [ 131s] Running Mkbootstrap for gzip () [ 131s] chmod 644 "gzip.bs" [ 131s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 131s] "/usr/bin/perl" "/usr/lib64/perl5/5.38.0/ExtUtils/xsubpp" -typemap '/usr/lib64/perl5/5.38.0/ExtUtils/typemap' gzip.xs > gzip.xsc [ 132s] mv gzip.xsc gzip.c [ 132s] cc -c -D_REENTRANT -D_GNU_SOURCE -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -fPIC -DPERL_USE_SAFE_PUTENV -fwrapv -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Wall -pipe -DVERSION=\"0.20\" -DXS_VERSION=\"0.20\" -fPIC "-I/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE" gzip.c [ 132s] In file included from gzip.xs:13: [ 132s] /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/perl.h:1059:9: warning: "PERL_USE_SAFE_PUTENV" redefined [ 132s] 1059 | #define PERL_USE_SAFE_PUTENV [ 132s] | ^~~~~~~~~~~~~~~~~~~~ [ 132s] : note: this is the location of the previous definition [ 132s] In file included from /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/perl.h:6227: [ 132s] gzip.xs: In function 'PerlIOGzip_getarg': [ 132s] /usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/CORE/embed.h:437:49: warning: 'mode' may be used uninitialized [-Wmaybe-uninitialized] [ 132s] 437 | # define newSVpv(a,b) Perl_newSVpv(aTHX_ a,b) [ 132s] | ^~~~~~~~~~~~~~~~~~~~~~~ [ 132s] gzip.xs:697:8: note: in expansion of macro 'newSVpv' [ 132s] 697 | sv = newSVpv (mode, 4); [ 132s] | ^~~~~~~ [ 132s] gzip.xs:675:24: note: 'mode' was declared here [ 132s] 675 | register const char *mode; [ 132s] | ^~~~ [ 132s] rm -f blib/arch/auto/PerlIO/gzip/gzip.so [ 132s] LD_RUN_PATH="/lib64" cc -shared -O2 -g2 -gdwarf-4 -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong -Wformat-security -fmessage-length=0 -frecord-gcc-switches -Wl,-z,relro,--as-needed -feliminate-unused-debug-types -Wformat -mabi=lp64d -march=rv64gc -g -Wall -pipe -L/usr/local/lib gzip.o -o blib/arch/auto/PerlIO/gzip/gzip.so \ [ 132s] -lz \ [ 132s] [ 132s] chmod 755 blib/arch/auto/PerlIO/gzip/gzip.so [ 133s] Manifying 1 pod document [ 133s] + exit 0 [ 133s] Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.yjHpT0 [ 133s] + umask 022 [ 133s] + cd /home/abuild/rpmbuild/BUILD [ 133s] + cd perl-PerlIO-gzip-0.20 [ 133s] + LANG=C [ 133s] + export LANG [ 133s] + unset DISPLAY [ 133s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 133s] + mkdir -p /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 133s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 133s] + make DESTDIR=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 install_vendor [ 133s] "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- gzip.bs blib/arch/auto/PerlIO/gzip/gzip.bs 644 [ 133s] Manifying 1 pod document [ 134s] Files found in blib/arch: installing files in blib/lib into architecture dependent library tree [ 134s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 134s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO/gzip.pm [ 134s] Installing /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/man/man3/PerlIO::gzip.3 [ 134s] Appending installation info to /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/perllocal.pod [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/info [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/doc/packages [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/doc/perl-PerlIO-gzip [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/doc/perl-PerlIO-gzip-0.20 [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/gtk-doc [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/doc [ 134s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/man [ 134s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 -regex '.*/man/man./.*.[0-9]' [ 134s] + xargs rm -f -- [ 134s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 -regex '.*/man/../man./.*.[0-9]' [ 134s] + xargs rm -f -- [ 134s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 -regex '.*/man/man./.*.[0-9]pm' [ 134s] + xargs rm -f -- [ 134s] + test -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 -a -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto [ 134s] + find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto -name .packlist -print0 [ 134s] + xargs -0 -r rm [ 134s] + '[' riscv64 == noarch ']' [ 134s] + rm -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/5.38.0/riscv64-linux-thread-multi/perllocal.pod [ 134s] + FILES=perl-PerlIO-gzip.files [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0 -maxdepth 1 -type f [ 134s] + RES= [ 134s] + '[' -n '' ']' [ 134s] + base_dir=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ -type d [ 134s] ++ sort [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] + continue [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi [ 134s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 134s] + el=riscv64-linux-thread-multi [ 134s] + all_dir=(${all_dir[@]} $el) [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO [ 134s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 134s] + el=riscv64-linux-thread-multi/PerlIO [ 134s] + all_dir=(${all_dir[@]} $el) [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto [ 134s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 134s] + el=riscv64-linux-thread-multi/auto [ 134s] + all_dir=(${all_dir[@]} $el) [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO [ 134s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 134s] + el=riscv64-linux-thread-multi/auto/PerlIO [ 134s] + all_dir=(${all_dir[@]} $el) [ 134s] + for dir in '`find ${base_dir} -type d | sort`' [ 134s] + '[' /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip = /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ ']' [ 134s] ++ echo /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip [ 134s] ++ gawk -F/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/ '{print $2}' [ 134s] + el=riscv64-linux-thread-multi/auto/PerlIO/gzip [ 134s] + all_dir=(${all_dir[@]} $el) [ 134s] + for i in '${all_dir[@]}' [ 134s] + '[' riscv64-linux-thread-multi = auto ']' [ 134s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi ']' [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi -maxdepth 1 -type f [ 134s] + RES= [ 134s] + '[' -n '' ']' [ 134s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi [ 134s] + /bin/cat [ 134s] + for i in '${all_dir[@]}' [ 134s] + '[' riscv64-linux-thread-multi/PerlIO = auto ']' [ 134s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO ']' [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO -maxdepth 1 -type f [ 134s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm [ 134s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm ']' [ 134s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO [ 134s] + /bin/cat [ 134s] + for file in '$RES' [ 134s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/PerlIO/gzip.pm [ 134s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/PerlIO/gzip.pm [ 134s] + /bin/cat [ 134s] + for i in '${all_dir[@]}' [ 134s] + '[' riscv64-linux-thread-multi/auto = auto ']' [ 134s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 134s] + continue [ 134s] + for i in '${all_dir[@]}' [ 134s] + '[' riscv64-linux-thread-multi/auto/PerlIO = auto ']' [ 134s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO ']' [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO -maxdepth 1 -type f [ 134s] + RES= [ 134s] + '[' -n '' ']' [ 134s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO [ 134s] + /bin/cat [ 134s] + for i in '${all_dir[@]}' [ 134s] + '[' riscv64-linux-thread-multi/auto/PerlIO/gzip = auto ']' [ 134s] + '[' /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip = /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto ']' [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip ']' [ 134s] ++ find /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip -maxdepth 1 -type f [ 134s] + RES=/home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 134s] + '[' -n /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so ']' [ 134s] + fgen_dir /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip [ 134s] + /bin/cat [ 134s] + for file in '$RES' [ 134s] ++ basename /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0//riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 134s] + fgen_file /usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 134s] + /bin/cat [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/share/man ']' [ 134s] + '[' -f /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/var/adm/perl-modules/perl-PerlIO-gzip ']' [ 134s] + '[' -d /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/bin ']' [ 134s] + /usr/lib/rpm/find-debuginfo.sh -j12 --build-id-seed 0.20-1.1 --unique-debug-src-base perl-PerlIO-gzip-0.20-1.1.riscv64 -S debugsourcefiles.list /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 134s] extracting debug info from /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64/usr/lib64/perl5/vendor_perl/5.38.0/riscv64-linux-thread-multi/auto/PerlIO/gzip/gzip.so [ 134s] 158 blocks [ 134s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debuginfo.manifest [ 135s] + cp /usr/lib/rpm/debug.manifest /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/perl-PerlIO-gzip-debugsource.manifest [ 135s] + /usr/lib/rpm/check-buildroot [ 135s] + /usr/lib/rpm//brp-compress [ 135s] + /usr/lib/rpm/brp-strip-static-archive /bin/strip [ 135s] + /usr/lib/rpm/brp-python-hardlink [ 135s] + /usr/lib/rpm/tizen/find-docs.sh /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 135s] + /usr/lib/rpm/tizen/find-isufiles.sh /home/abuild/rpmbuild/BUILD/perl-PerlIO-gzip-0.20/isu.list [ 135s] ~/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 135s] ~/rpmbuild/BUILD/perl-PerlIO-gzip-0.20 [ 135s] + /etc/hal/rootstrap/hal-rootstrap-checker.sh 0 /home/abuild/rpmbuild/SOURCES [ 138s] Processing files: perl-PerlIO-gzip-0.20-1.1.riscv64 [ 138s] Provides: perl(PerlIO::gzip) = 0.20 perl-PerlIO-gzip = 0.20-1.1 perl-PerlIO-gzip(riscv-64) = 0.20-1.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Requires: ld-linux-riscv64-lp64d.so.1()(64bit) ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.27)(64bit) libz.so.1()(64bit) [ 138s] Processing files: perl-PerlIO-gzip-debugsource-0.20-1.1.riscv64 [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: perl-PerlIO-gzip-debugsource = 0.20-1.1 perl-PerlIO-gzip-debugsource(riscv-64) = 0.20-1.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Processing files: perl-PerlIO-gzip-debuginfo-0.20-1.1.riscv64 [ 138s] Aptk: PG1hbmlmZXN0PgogPHJlcXVlc3Q+CiAgICA8ZG9tYWluIG5hbWU9Il8iLz4KIDwv [ 138s] cmVxdWVzdD4KPC9tYW5pZmVzdD4K [ 138s] [ 138s] Provides: perl-PerlIO-gzip-debuginfo = 0.20-1.1 perl-PerlIO-gzip-debuginfo(riscv-64) = 0.20-1.1 [ 138s] Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(FileDigests) <= 4.6.0-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 [ 138s] Recommends: perl-PerlIO-gzip-debugsource(riscv-64) = 0.20-1.1 [ 138s] Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 138s] Wrote: /home/abuild/rpmbuild/SRPMS/perl-PerlIO-gzip-0.20-1.1.src.rpm [ 138s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-0.20-1.1.riscv64.rpm [ 138s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debugsource-0.20-1.1.riscv64.rpm [ 138s] Wrote: /home/abuild/rpmbuild/RPMS/riscv64/perl-PerlIO-gzip-debuginfo-0.20-1.1.riscv64.rpm [ 138s] Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.OmzE0C [ 138s] + umask 022 [ 138s] + cd /home/abuild/rpmbuild/BUILD [ 138s] + cd perl-PerlIO-gzip-0.20 [ 138s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 138s] + rm -rf /home/abuild/rpmbuild/BUILDROOT/perl-PerlIO-gzip-0.20-1.1.riscv64 [ 138s] + exit 0 [ 138s] ... checking for files with abuild user/group [ 138s] ... creating baselibs [ 139s] [ 139s] 3986c8c1c30d finished "build perl-PerlIO-gzip.spec" at Tue Dec 17 13:15:22 UTC 2024. [ 139s]